Analog Modules AS-i IP65, M12
|
|
|
- June Owen
- 5 years ago
- Views:
Transcription
1 Plug and Play as simply as digital AS-i I/O BWU1361 / BWU1362 / BWU1722 / BWU1853 / BWU1917 / BWU1363 / BWU2532 / BWU1359 / BW1360 / BWU1893 BWU1894 BWU1895 BWU1963 BWU1964 Housing, construction: IP65, M12 Housing 45 mm wide Inputs Outputs Input voltage Output voltage AS-i address 3 Art. no. analog analog (sensor supply) 1 (actuator supply) 2 2x mA 0 out of AS-i 1 AB Slave BWU1893 2x mA 0 out of AS-i 1 Single Slave BWU1894 2x V 0 out of AS-i 1 AB Slave BWU1963 2x V 0 out of AS-i 1 Single Slave BWU1964 2x Pt100 0 out of AS-i 1 AB Slave BWU1895 1x ( mA / 1x ( mA / out of AS-i out of AS-i 2-4 Single Slaves BWU1917 1x ( mA / 1x ( mA / out of AUX out of AUX 2-4 Single Slaves BWU1853 4x mA 0 1 Single Slave BWU mm wide 4x V 0 1 Single Slave BWU1360 4x Pt100, 2/4 wire mode 0 out of AS-i 1 Single Slave BWU1363 4x Pt100, 2/3 wire mode 0 out of AS-i 1 Single Slave BWU2532 4x mA out of AUX 1 Single Slave BWU1722 4x mA 1 Single Slave BWU1361 4x V 1 Single Slave BWU Input voltage (sensor supply): inputs are supplied by AS-i or by AUX (auxiliary 24V power). If supplied by AS-i, inputs can neither be connected to earth nor to external potential. 2 Output voltage (actuator supply): outputs are supplied by AS-i or by AUX (auxiliary 24V power). If supplied by AS-i, inputs can neither be connected to earth nor to external potential. 3 AS-i address: AB Slave (max. 62 AB Slaves/AS-i network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/per AS-i network), mixed use allowed. We reserve the right to change any data Mannheim, page 1
2 Article no. BWU1893 BWU1894 BWU1895 BWU1963 BWU1964 BWU1359 BWU1360 BWU1363 BWU2532 General data Device type Input Connection Periphery connection M12 plug AS-i connection via AS-i substructure module AS-i Profile S-7.A.9 S-7.3.D S-7.A.9 S-7.3.D S-7.3.E Slave-Type AB Slave (up to 62) Single Slave (up to 31) AB Slave (up to 62) Single Slave (up to 31) Required Master profile M4 M3 M4 M3 Since AS-i specification Operating voltage AS-i voltage 30V DC Max. current < 200mA < 80mA < 200mA < 100mA < 80mA AUX Voltage V Max. current 500mA Input Resolution normal: 14 Bit, fast: 11Bit 14 Bit 11 or. 14 Bit 16 Bit (1 A) 16 Bit (1mV) 16 Bit (0,1 C) Range of value dez. / dez. 1 0 dez dez dez dez. 1 dez dez C C Internal resistance K K Max. input voltage 25V 25 Max. input current 40mA 40mA Power supply 24V out of AS-i 24V external or out of AS-i Power supply of max. 70mA max. 70mA max. 500mA out of external attached sensors 24V, max. 100mA out of AS-i Environment Applied standards EN Housing housing for DIN-rail mounting EN Operating temperature 0 C +70 C -20 C +70 C Storage temperature -20 C +85 C Protection category IP65 DIN Voltage of insulation 500V Dimensions (W / H / D) 45 / 80 / / 80 / 45 in mm 1 Siemens format 0 C +70 C page 2 Mannheim, We reserve the right to change any data
3 Article no. BWU1853 BWU1917 BWU1361, BWU1362 BWU1722 General data Device type In-/Output Output Connection Periphery connection AS-i connection AS-i M12 plug via AS-i substructure module Profile S-6.0.x S Slave-Type 2, 3 o. 4 Single Slaves (up to 31) Single Slave (up to 31) Required Master profile M4 M3 Operating voltage Max. AS-i current AUX AS-i voltage 30V DC < 200mA < 100mA Voltage V V Max. AUX current 1A 500mA Input Resolution 16 Bit (1 A) or 16 Bit (1mV) Range of value dez. / dez. Internal resistance 4-20mA: V: 100k Max. input voltage 25V Max. input current 40mA Power supply 24V external 24V out of AS-i Power supply of max. 1A in total max. 200mA in total attached sensors (sensors and actuators) (sensors and actuators) Ausgang Resolution 16 Bit (1 A) or 16 Bit (1mV) 16 Bit (1 A) 16 Bit (1mV) Range of value dez. / dez dez dez. Resistance of actuators 0-10V: min. 3,3k 0-20mA: max. 600 max. 600 Max. output voltage 11,5V Max. output current 23mA Power supply 24V external 24V out of AS-i 24V external or out of AS-i Power supply of attached actuators Environment max. 1A in total (sensors and actuators) Applied standards EN Housing Operating temperature Storage temperature Protection category DIN Voltage of insulation max. 200mA in total (sensors and actuators) housing for DIN-rail mounting 0 C +70 C -20 C +85 C IP65 500V max. 1,1A in total EN We reserve the right to change any data Mannheim, page 3
4 Programming input Bit setting P0: BWU1893 BWU1894 BWU1895 BWU1963 BWU1964 Article number BWU1359 BWU1360 BWU1363 BWU : Bridge between Pin 3 and 4 active 0: Bridge between Pin 3 and 4 active 1: 50 Hz filter in A/D converter active 0: 60 Hz filter in A/D converter active P1: 1: dez. 0: dez. (Siemens format) 1: 2 wire-mode 0: 4 wire-mode 1: dez. 0: dez. (Siemens format) P2: 1: normal 0: fast 1: -200 C C 0: -120 C C P3: 1: channel 2 on 0: channel 2 off 1: 2 wire-mode 0: 4 wire-mode 1: 2 wire-mode 0: 3 wire-mode 1 For peripheral fault setting see the table "Bit combinations P1 and P2 Bit combinations P1 and P2 BWU1359, BWU1360, BWU1363, BWU2532 Peripheral fault can be released through channel P1 P on off off off 0 1 on on off off 1 0 on on on off 1 1 on on on on page 4 Mannheim, We reserve the right to change any data
5 Programming In-/Output Output Bit setting BWU1853 BWU1917 Article number Parameter (first adress) Parameter P0: P0 1: Automatic switching between current and voltage 0: Current / voltage specified by P1 and P3 P1: P1 If P0= 0 1: OutI active 0: OutU active, otherwise not used P2: P2 1: Profil 7.3 is monitored 0: Profil 7.3 is not monitored BWU1361 BWU1362 BWU1722 not used P3: P3 If P0= 0 1: InI active not used 0: InU active, otherwise not used Parameter (second adress) P0, P1: Transformation speed InI, InU 11: fastest: 1ms/8 Bit 01: medium speed/precise: 5 ms/12 Bit 10: highest precision: 20 ms/16 Bit 00: not used P2: 1: 10V= 10000, 20mA= : 10V= 27648, 20mA= (Siemens format) P3: 1: Pin 3 and Pin 4 bridged 0: Pin 3 and Pin 4 not bridged Programming notes Article no. ID-Code ID1-Code ID2-Code IO-Code BWU1893, BWU1895, BWU A Code definition 9 7 ID1 14 Bit 11 Bit Channel 1 0; 2; 3 1 Channel 1 and 2 4; 5; 7 (Default value 6 ID1=7) BWU1853, BWU the ID code 1 can be written for all slaves, but only the X 6 slave with the lowest address defines the code for the remaining slaves. - ID1 is the same code for all slaves. - The code ID2 for all slaves (different for each according to his profile) is specified by the code ID1. number of connected AS-i slaves ID1= A: 2 AS-i slaves corresponding to 8 Bit ID1= B: 3 AS-i slaves corresponding to 12 Bit else: 4 AS-i slaves corresponding to 16 Bit BWU1894, BWU (Default value ID1=F) D 7 BWU1359, BWU1363, BWU2532, 3 (Default value ID1=F) E 7 BWU2049, BWU1360 BWU1361, BWU1362, BWU (Default value ID1=F) BWU1893, BWU can transfer either 11 or 14 Bi-values Via ID1 the data capacity and the channel number can be defined. We reserve the right to change any data Mannheim, page 5
6 M12 Connections: BWU1359, BWU1360, BWU1853, BWU1917 BWU1895, BWU2086, BWU2532 BWU1361, BWU1362 BWU1722 BWU1893, BWU1894, InI, InU OutI, OutU BWU1363 BWU1963, BWU V 24V Sig+ CH+ CH+ Sig+ Sig+ 2 Sig+ Sig+ 24V CHS+ CHS- n.c. 24V 3 0V 0V Sig- CH- CH- Sig- Sig-/0V 4 Sig- Sig- 0V CHS- * n.c. n.c. 5 Shield Shield Shield Shield Shield Shield Shield *) Pin 4 bridged inetrnally to Pin 3 Accessories: AS-i substructure module to connect 2 AS-i flat cables (article no. BW1180) AS-i substructure module to connect 1 AS-i flat cable, 1 flat cable for additional supply (article no. BW1181) AS-i substructure module to connect 2 AS-i round cable (article no. BW1182) AS-i substructure module to connect 1 AS-i round cable, 1 round cable for additional supply (article no. BW1183) AS-i substructure module to connect 2 AS-i flat cables with addressing socket (article no. BW1438) page 6 Mannheim, We reserve the right to change any data
Analog Modules AS-i, IP67, M12
Analog Modules, M12 2 x 2 connectors for compact housing, IP67 (Figure similar) Figure Type Inputs analog Outputs analog M12 connection Input voltage (sensor supply) Output voltage (actuator supply) (2)
Digital Modules AS-i, IP67, M12
Digital Modules, IP67, M1 x connectors for color LEDs per output, state (yellow), overload (red) BWU487 / BWU547 / BWU55 / BWU594 / BWU60 / BWU713 / BWU75 / BWU78 (Figure similar) BWU617 / BWU619 / BWU66
Digital Modules AS-i in IP20, 22,5 mm
Digital Modules AS-i in 22,5 mm Cost efficient solution in IP20 (Figure similar) Figure Type Housing s digital digital voltage (sensor supply) (1) Output voltage (actuator supply) (2) AS-i connection (3)
AS-i / IO-Link Module, IO-Link Master with 4 IO-Link Ports
/ IO-Link Module, /IO-Link Module, IO-Link Master with 4 s fourfold IO-Link Master single in one housing Power supply of s out of AUX (or ) Figure Type Inputs digital 8x M 8x M 4 x + 4 x + Outputs digital
AS-i / IO-Link Module, IO-Link Master with 4 IO-Link Ports
/ IO-Link Module, /IO-Link Module, IO-Link Master with 4 s fourfold IO-Link Master in one housing Power supply of s (or ) (Figure similar) Figure Type Inputs digital 4 x + 4 x + 4 x Outputs digital M12
AS-i 3.0 motor module
3.0 motor module 3.0 motor module for two 4 V motorized rollers Itoh Denki (PM00ME/XE/XP, PM60ME/XE/XP) with 4 binary and analog outputs Mixed input/output slave Speed setting of parameter Protection category
PCB AS-i modules, board based solutions
Special variants on request (Figure similar) PCB modules, board based solutions Circuit Inputs board dimensions digital Inputs analog Outputs digital Connection Coated LED status display 4 Input voltage
AS-i Safety Output Module, IP20
a AS-i Safety Output Module Safe outputs and standard inputs in one module Protection category IP20 Figure Housing Inputs digital Outputs Safety, SIL3, cat.4 Input voltage (sensor supply) 1 Output voltage
AS-i 3.0 Motor modules
AS-i 3.0 motor modules for two 4 V motorized rollers e.g. Interroll (EC00, EC300, EC310) or RULMECA (RDR BL-) or Itoh Denki (PM00ME/XE/XP, PM60ME/XE/XP) slaves in one module 1 Single Slave with - s - digital
AS-i Safety Input Modules (M12), IP67
Input Modules (), IP67 Input Modules (), IP67 for opto, floating contacts or complementary switch Applications up to category 4/PLe/SIL 3 (Figure similar) Figure Type Inputs, SIL 3, cat. 4 4 x, 4 x, 4
AS-i 3.0 motor modules
AS-i 3.0 4I/4O modules for two 4 V motorized rollers e.g. Interroll (EC00, EC300 or EC30) or RULMECA (RDR BL-) or Rollex (type 840) with binary and analog outputs Mixed input/output slave Speed setting
Active Distributors AS-i Safety, Active Distributors AS-i
Active Distributors Safety, Active Distributors x connectors for Periphery connection via, M cable sockets or push in terminals (Figure similar) Figure Type Inputs Safety, SIL, Cat. x 9 mm, -channels Safety
AS-i Safety Analog Input Module, IP20
2 safe inputs in one module: 4... 20 ma or 0... 10 V or Pt100 or thermocouple (type J / K / N / R / S) Applications up to category 4/PLe/SIL 3 (figure similar) The AS-i Safety Input Module for analog inputs
AS-i Safety Relay Output Module with Diagnostic Slave and 1 EDM Input
Safety + standard I/O in one module Safety relay output with galvanically isolated contact sets, approved up to 230 V IEC 61508 SIL 3, EN ISO 13849-1/PLe Kat 4, EN 62061 SIL 3 Protection category IP20
Active Distributors ASi Safety, IP67
x connectors for profile cable Periphery connection via M8 cable sockets M cable sockets (Figure similar) Figure Type Inputs, SIL 3, Cat. 4 9 mm 9 mm 9 mm 9 mm channels channels channels channels Inputs
Article no. BWU2045: AS-i Safety Relay Output Module with Diagnostic Slave and 1 EDM Input 1.23 NC
Safety + standard I/O in one module AS-i Safety relay output with galvanically isolated contact sets, approved up to 230 V IEC 61508 SIL 3, EN ISO 13849-1/PLe Kat 4, EN 62061 SIL 3 Protection category
Encoder signal/ Sensor signal. Number of monitored axes. sine/cosine, SSI, TTL (1) up to 2 independent axes. sine/cosine. up to 2 independent axes
w AS-i Speed Monitor for sine/cosine encoder for HTL encoder for SSI encoder for TTL encoder for sensors for 2 fast electronic safe outputs 128 devices Supplied out of AS-i and external 24 V (figure similar)
AS-i Safety Output Module with Diagnostic Slave, 1 EDM input, 3I and 2O
ext. in ext. in Safety Output Module with Safety and standard I/O in one module Electronic safety output Additional 3 standard inputs, 1 EDM input, 2 outputs IEC 61508 SIL 3, EN ISO 13849-1 PLe Cat 4,
AS-i 3.0 PROFINET-Gateways with integrated Safety Monitor
AS-i 3.0 PROFI Gateways with Master, 1 PROFI Slave Up to 32 release circuits up to 6 safe output circuits on the Monitor safe relays or fast electronic safe outputs up to 32 independent AS-i outputs Multiple
AS-i 3.0 Sercos Gateways with integrated Safety Monitor
AS-i 3.0 Sercos Gateways with Safety on Sercos and Safe Link in one device up to 456 Devices Safely monitoring safety drives with Safety on Sercos 2 / 1 AS-i master, Sercos slave switch integrated (figure
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways 2 / 1 AS-i Master, Slave 1 AS-i Safety Monitor for 2 s Operation using a single Monitor! Monitor processes safety slaves on two s Coupling between the two networks superfluous Up to 32
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways 2 AS-i Masters, 1 PROFIBUS Slave Up to 32 release circuits up to 6 CAT4, SIL 3 safe output circuits on the Monitor safe relays or fast electronic safe outputs up to 32 independent AS-i
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways AS-i 3.0 Gateways 2 / 1 AS-i Master, Slave 1 AS-i Safety Monitor for 2 AS-i networks Operation using a single Monitor configuration! Monitor processes safety slaves on two AS-i networks
AS-i Safety Relay Output Module with Diagnostic Slave, 1 EDM, 1 x 2 channel Safe Input
ext. in ext. in AS-i Safety Relay Output Module with Safety + standard I/O in one module Safety relay output with galvanically isolated contact sets, approved up to 230 V Additionally 1 EDM input, 1 x
AS-i 3.0 EtherNet/IP + Modbus TCP-Gateways with integrated Safety Monitor
AS-i 3.0 -Gateways 2 / 1 AS-i Master, -Slave 1 switch integrated up to 32 release circuits up to 6 release circuits SIL 3, cat. 4 on the Monitor Safe AS-i outputs are supported up to 32 independent AS-i
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via BUS or NET AS-i 3.0 Gateways, safe via NET or BUS safe and Safe Link in one device up to 450 devices 2 / 1 Master, NET / BUS Slave AS-i Safety input slaves report via safe AS-i Safety output slaves
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via BUS or NET AS-i 3.0 Gateways, safe via NET or BUS 2 / 1 Master, NET / BUS Slave AS-i Safety input slaves report via safe AS-i Safety output slaves switch via safe Up to 32 release circuits up
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via BUS or NET AS-i 3.0 Gateways, safe via NET or BUS safe and Safe Link in one device up to 450 devices 2 / 1 Master, NET / BUS Slave AS-i Safety input slaves report via safe AS-i Safety output slaves
AS-i 3.0 EtherNet/IP + Modbus TCP-Gateways with integrated Safety Monitor
AS-i 3.0 -Gateways 2 / 1 AS-i Master, -Slave (1) switch integrated Up to 64 release circuits up to circuits SIL 3, cat. 4 on the Monitor, relays or fast Safe AS-i outputs are supported up to 32 independent
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
via PROFI or PROF AS-i 3.0 Gateways, via PROF or PROFI 22 / 1 Master, PROF / PROFI Slave AS-i Safety input slaves report via AS-i Safety output slaves switch via Up to 32 release circuits up to 6 CAT4,
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways AS-i 3.0 Gateways 2 / 1 AS-i Master, Slave 1 AS-i Safety Monitor for 2 s Operation using a single Monitor! Monitor processes safety slaves on two s Coupling between the two networks superfluous
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways AS-i 3.0 Gateways 2 / 1 Master, Slave 1 AS-i Safety Monitor for 2 AS-i networks Operation using a single Monitor configuration! Monitor processes safety slaves on two AS-i networks Coupling
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via or AS-i 3.0 Gateways, safe via or 2 / 1 Master, / Slave AS-i Safety input slaves report via safe AS-i Safety output slaves switch via safe Up to 32 release circuits up to 6 CAT4, SIL 3 safe output
AS-i 3.0 EtherCAT Gateways with integrated Safety Monitor
AS-i 3.0 EtherCAT Gateways with 2 / 1 Master, EtherCat Slave 1 Safety Monitor for 2 s Operation using a single Monitor! Monitor processes safety slaves on two s Coupling between the two networks superfluous
Strain gauge Measuring Amplifier GSV-1A8. Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB
Strain gauge Measuring Amplifier GSV-1A8 Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB GSV-1A8USB SubD1 (front side) GSV-1A8USB M12 (front side) GSV-1A16USB (rear side) GSV-1A8USB K6D (front side)
Strain gauge Measuring Amplifier GSV-1A8. Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB
Strain gauge Measuring Amplifier GSV-A8 Instruction manual GSV-A8, GSV-A8USB, GSV-A6USB GSV-A8USB SubD5 (front side) GSV-A8USB M2 (front side) GSV-A6USB (rear side) GSV-A8USB K6D (front side) Version:
Diagnostics (Logical)
Input Station Rugged, Fully Potted Stations IP 67 Protection Flat and Round Cable Support AS-I Version 2.1 FAS4-S0400 Electrical Operating Current:
Diagnostics (Logical) Diagnostics (Physical)
Analog Output Stations Analog on AS-I IP 20 for In-The-Cabinet Powered by AS-I or Auxiliary Supply Voltage and Current Outputs ASI-AO-2 BW1412 ASI-AO-2A BW1727 Electrical Operating Current:
Installation Instructions Temperature transmitter TAA /00 06/2011
Installation Instructions Temperature transmitter TAA431 706042/00 06/2011 Contents 1 Functions and features...3 2 Installation...4 2.1 Addressing...4 2.2 Mechanical installation...4 2.3 Connection to
AS-Interface I/O Module
AS-Interface I/O Module Construction The AS-Interface I/O module is designed as a compact, robust field module. It is composed of an electronic module (top) and a coupler module (base). Connectors (standard
Cube67 - Modular I/O station
Compact modules Cube67 DI16 C 8xM12 Cube67 DI8 C 4xM12 Cube67 DI8 C 8xM8 Digital inputs Art.-No. UL 56602 UL 56612 UL 56622 approx. 50 ma approx. ma Terminator integrated Configuration PIN 2 input/diagnostic
INTRODUCTION: AS-i slave modules are now available for MICROMASTER, MICROMASTER Vector, MICROMASTER Integrated & COMBIMASTER.
AS-i Slave Module for MICROMASTER, MICROMASTER Vector, MICROMASTER Integrated & COMBIMASTER INTRODUCTION: AS-i slave modules are now available for MICROMASTER, MICROMASTER Vector, MICROMASTER Integrated
Universal Controller
3 342 Universal Controller For comfort control in HVAC & R-Systems Standalone electronic universal controller with P or PI response Operating voltage in accordance to type AC 24 V Control application selectable
GSV-1A4 M12/2 M12/2. Highlights
GSV-1A4 M12/2 M12/2 Highlights Input sensitivity: 2mV/V; 4mV/V, 2 mv/v, 1mV/V, 0.5mV/V configurable via jumpers Output signals ±10V AND 12mA+-8mA on 15 pin Sub-D Integrated half and quarter bridge completion
Super universal modules
s 8 174 TX-I/O Super universal modules TXM1.8X TXM1.8X-ML Two fully compatible versions: TXM1.8X: 8 inputs/outputs with LED signal / fault indication TXM1.8X-ML: As TXM1.8X, but with additional local override
AS-Interface Slaves. I/O Modules for Operation in the Field. Digital I/O modules IP67 - K45
Overview The large industry-proven K60 compact modules are complemented perfectly by the K45 compact module series. They round off the existing product range of smaller modules. The acknowledged advantages
Product Overview. by Bihl+Wiedemann
Product Overview by Bihl+Wiedemann About Bihl+Wiedemann Bihl+Wiedemann GmbH, founded in 1992 by Jochen Bihl and Bernhard Wiedemann, is a highly specialized, internationally operating engineering company
JUMO ecotrans ph 03 Microprocessor transmitter/ switching device for ph/redox voltage and temperature
Page 1/7 JUMO ecotrans 03 Microprocessor transmitter/ switching device for /Redox voltage and temperature with a 2-line LCD for mounting on a 35 mm DIN rail Brief description Depending on the configuration,
AS-Interface INSTALLATION GUIDE, TIPS AND TRICKS
AS-Interface INSTALLATION GUIDE, TIPS AND TRICKS AS-Interface Installation guide Tips and Tricks 2 Index AS-Interface General Features 4 AS-Interface Key Features 7 Selecting the Cable 8 Cable Routing
DIGITAL DISPLAY. for Industry Applications. Series WAY-SSI. Key-Features:
DIGITAL DISPLAY for Industry Applications Series WAY-SSI Key-Features: Content: Technical Data.2 Technical Drawing...2 Electrical Connection...3 Description...4 Order Code & Accessories...6 - WAY-SSI-S:
Operating instructions ClassicLine module AC5204 / AC5209 / AC5212 AC5235 / AC5236 / AC5237 AC /00 07/2017
Operating instructions ClassicLine module AC5204 / AC5209 / AC5212 AC5235 / AC5236 / AC5237 AC5274 7390889/00 07/2017 Contents 1 Functions and features...3 2 Operating and display elements...3 3 Installation...4
Diagnostics (Logical) Diagnostics (Physical)
Enclosure Mounted Input/Output Stations In-Cabinet I/O IP 20 Protection Ideal for Retrofits Automatic Baud Rate Sensing FDN20-4S-4XSG FDN20-4S-4XSG-E* FDN20-4S-4XSG-DIN* * Not UL Electrical Operating Current:
Measuring transducers MI4x0 series Programmable transducers for RTD sensors MI450
Measuring transducers MI4x0 series Programmable transducers for RTD sensors MI450 o Measuring of resistance of RTD sensors (Pt100, Pt1000, Ni100, Cu10,...) o Accuracy class up to: 0.5 o Programmable input
TXM1.8U TXM1.8U-ML. Universal modules TX-I/O
8 173 TX-I/O niversal modules TXM1.8 TXM1.8-ML Two fully compatible versions: TXM1.8: 8 inputs/outputs with LED signal / fault indication TXM1.8-ML: As TXM1.8, but with additional local override facility
TXM1.8U TXM1.8U-ML. Universal modules TX-I/O
s 8 173 TX-I/O niversal modules TXM1.8 TXM1.8-ML Two fully compatible versions: TXM1.8: 8 inputs/outputs with LED signal / fault indication TXM1.8-ML: As TXM1.8, but with additional local override facility
Thermal-Magnetic Circuit Breaker 2216-S
Thermal-Magnetic Circuit Breaker 226-S Description One and two pole thermal-magnetic circuit breaker in compact design with slide actuator, trip-free mechanism, various trip characteristics and optional
Cube20. Application-oriented. Installation-friendly. Efficient
Cube20 Application-oriented Installation-friendly Efficient 02 Cube20 Universal and flexible combined with Cube67 03 CUBE20 FIELDBUS I/Os FOR CONTROL CABINETS Application: Control cabinets Plant construction
TXM1.8U TXM1.8U-ML. Universal modules TX-I/O
s 8 173 TX-I/O niversal modules TXM1.8 TXM1.8-ML Two fully compatible versions: TXM1.8: 8 inputs/outputs with LED signal / fault indication TXM1.8-ML: As TXM1.8, but with additional local override facility
s Climatix AHU ext. module 14 I/O POL955.XX/XXX Climatix
s 3 262 Climatix Climatix AHU ext. module 14 I/O POL955.XX/XXX POL955.XX/XXX is a versatile Climatix extension module that can be connected to any type of Climatix POL6xx controller. Its high level of
Product and Applications Description. Note. Example of Operation. Installation Instructions. Application Programs WARNING
Product and Applications Description Note If the application program is not loaded completely by the ETS, you had better interrupt the 24 V voltage supply of the I/O-module during the loading interval.
MBM - Modular I/O system IP20
- Modular I/O system IP20 Input/output module digital 4-way Ordering data 4 digital inputs and outputs 55882 3-wire screw terminal block 55832 3-wire spring clamp terminal block 55852 Load weight 1) 1.00
MiniAmp. Electronics & Software. Miniature Charge Amplifier. Type 5030A...
Electronics & Software MiniAmp Type 5030A... Miniature Charge Amplifier The MiniAmp Type 5030A is a single channel, industrial charge amplifier, which converts the charge signal from piezoelectric sensors
Immersion Temperature Sensors
1 782 1782P01 Symaro Immersion Temperature Sensors QAE2164 QAE2174 Active sensors for acquiring the water temperature in pipes and tanks Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V or
Operating instructions. ProcessLine analogue module AC / / 2012
Operating instructions ProcessLine analogue module AC2916 739089 / 01 06 / 2012 Contents 1 Safety instructions... 3 2 Functions and features... 4 3 Operating and display elements... 4 4 Electrical connection...
Resistance measuring module
s 8 176 8176P01 TX-I/O Resistance measuring module TXM1.8P 8 inputs with LED signal / fault display. 8 resistance measuring inputs with individual configuration of resistance or temperature measurement.
SECTION 16 LED DIAGNOSTIC FEATURES: EXPANSION UNITS: SCR-31P-i. SCR-73-i. SEU-31-i. SCR-31-42TD-i. SEU-31TD-i
SECTION 16 VIPER Safety Relays Type: SCR-i (with added diagnostics) SAFETY RELAY FUNCTION: IDEM s VIPER SCR-i range of Safety Relays have been designed in accordance with EN60204-1 for safety circuits
4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current
Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4
Temperature Switches
ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,
Safety Barriers. CEAG safety barriers can be used for all kinds of instrumentation applications.
Safety Barriers Description Safety barriers limit the energy fed to an intrinsically safe circuit so that neither sparks nor thermal effects (hot surfaces) can cause an explosion. CEAG safety barriers
Process displays For current and voltage
Features Voltage input TRMS-AC/DC up to 600 V Current input AC/DC 1 A, 5 A and shunt (precision resistor) 60 or 100 mv With 2 or 4 limits Display range can be linearised Min, Max, Hold functions 4 20 ma
JUMO PINOS L01. Calorimetric flow sensor. Brief description. Special features. Customer benefits. Data Sheet
sales@jumo.co.uk info.us@jumo.net Page 1/9 JUMO PINOS L01 Calorimetric flow sensor Brief description The JUMO PINOS L01 flow sensor serves the measuring and monitoring of flow velocities of water and aqueous
Overvoltage Protection
Overvoltage Protection Weidmuller has a complete line of overvoltage protection devices to effectively stop the harmful effects of electrical overvoltage and electrical noise. There is strong potential
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 7 safety contacts (N/O), instantaneous 2 auxiliary contacts (N/C),
Expansion Module HZS 541-1S
Expansion Module HZS 541-1S 12.10.2015 Page 1 System Description The external HZS 541-1S expansion module provides users of biomass heating systems with additional 230 V AC relay outputs, analog inputs
RXM39.1. PL-Link IO Block. Desigo TRA. Use with PXC3 series room automation station
s 3 836 3836P01 Desigo TRA PL-Link IO Block Use with PXC3 series room automation station RXM39.1 The PL-Link IO Block contains the inputs and outputs controlled by a room automation station via PL-Link.
Module 18plus. Description. 18plus
Module 8plus Description Wiring of load and signal lines in a space-saving manner will become ever more important for designers of electrical plants and systems, because all control cabinets and control
Screw terminal panels, Relay output boards, connection cables
Screw terminal panels, Relay output boards, connection cables How important are cables and terminal panels? When the PC runs important controlling and regulating tasks in a processing system, then data
Operating instructions AS-i SmartLine module AC3200 AC /00 06/2016
Operating instructions AS-i SmartLine module AC3200 AC3201 80237876/00 06/2016 Contents 1 Preliminary note...3 1.1 Symbols used...3 1.2 Warnings used...3 2 Safety instructions...3 2.1 General...3 2.2 Target
9926 Series Branch Rated Circuit Breakers AC Version
Branch Rated AC Version Hydraulic Magnetic Single pole and double pole versions 20/240 VAC, 50/60 Hz Up to 25A Just 3 mm wide Mounts on 35mm DIN-rail UL 489 listed, CSA C22.2 No. 5-02, CE VDE Ordering
Sensor boxes SRBG Key features
Key features Function SRBG sensor boxes are the compact solution when it comes to electrical feedback signals and monitoring the position of process valves which are actuated with pneumatic quarter turn
SX5A AS-Interface(Communication Terminal and Repeater)
SXA AS-Interface(Communication Terminal and Repeater) AS-Interface Communication Terminals (Slave Modules) IP67 I/O Module AS-Interface Ver..1 compliant, capable of connecting 6 slaves Compatible with
Temperature module. 4 inputs for thermocouples
2 Bosch Rexroth AG Electric Drives and Controls Documentation 4 inputs, M12 Thermocouples (TC) M12 Technical data S67-AI4-UTH-M12 Local bus interface Designation System bus M12 connector, B-coded, 5-pin,
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 5 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Connection
C-DIAS Analogue Output Module CAO 081 for eight 10V DC outputs
C-DIAS Analogue Output Module CAO 081 for eight 10V DC outputs This analogue output module is used for driving components capable of being analogue driven (e.g. proportional pressure valves, frequency
EtherCAT Slave. EtherCAT Data Transition. EtherCAT Tool: TwinCAT. Taiwan Pulse Motion Co.,Ltd
EtherCAT Slave In network, the master sends an Ethernet frame passing through all of the slave nodes. Each datagram is a command that consists of a header, data and a working counter. datagrams are sent
DATA SHEET Selectable AC transducer, TAS-331DG
DATA SHEET Selectable AC transducer, TAS-331DG Measures power or reactive power on 3-phase AC networks Class 0.5 (IEC-688) measurement Supply and measuring voltage up to 690 V Easy configuration via PC
STBEHC3020KC counter kit STB - 1 CH Hz - 2 I
Characteristics counter kit STB - 1 CH - 0..40000 Hz - 2 I Main Range of product Product or component type Number of channels 1 Complementary Kit composition Counting input number 2 Counting frequency
EXOcompact Third Generation Manual
EXOcompact Third Generation Manual DISCLAIMER The information in this manual has been carefully checked and is believed to be correct. AB Regin however, makes no warranties as regards the contents of this
SITOP in the SIMATIC Design
Siemens AG 2017 /2 Introduction /3 1-phase, 24 V DC (for S7-300 and ET 200M) /9 1-phase, 24 V DC (for S7-1200) /11 1-phase, 24 V DC (for S7-1500 and ET 200MP) /14 3-phase, 24 V DC (ET 200pro) Siemens KT
BOX TRANSDUCER SMALL SIZED AC TRANSDUCER 90 SERIES
SMALL SIZED AC TRANSDUCER 90 SERIES ATT2-91A (120 40 130mm/0.5kg) WTT2-92A-33 (120 56 130mm/0.7kg) SPECIFICATIONS Continued on the next page SMALL SIZED AC TRANSDUCER 90 SERIES Standard of auxiliary supply:
Installation / control / monitoring technique. CANopen PLC IL 5504, IN 5504 minimaster
Installation / control / monitoring technique CANopen PLC IL, IN minimaster 6 Circuit diagram CAN H Rab C CAN L C IL IN C CAN H Rab CAN L C According to IEC/EN 6 -, EN 78 Operation as master - Operation
SIMOCODE 3UF Motor Management and Control Devices
Technical specifications General data applicable to the basic units, current measuring modules, current/voltage measuring modules, expansion modules, decoupling module and operator panel Permissible ambient
Switches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
Operating instructions Memory plug E /02 11/2011
Operating instructions Memory plug E30398 UK 704930/02 11/2011 Contents 1 Preliminary note...3 1.1 Symbols used...3 1.2 Terms used...3 2 Safety instructions...4 3 Factory setting...4 4 Functions and features...5
Installation / Control / Monitoring Technique
Installation / Control / Monitoring Technique MINIMASTER CANopen PLC IL, IN 6 Your Advantages Compact CAN-operation Graphical programming Qquick and easy installation Various input- / output module digital
PSC-AC. PSC AC-series W 1 to 3 Outputs. AC-DC Power supply. Input Voltage ranges. Single output ratings. 2-3 outputs ratings
PSC-AC AC-DC Power supply PSC AC-series 100-240W 1 to 3 Outputs Input / Output Wide input voltage ranges. Single outputs from 5 to 48 V. Two to three outputs 5 to 24 V. Operation High efficiency Operating
Data Sheet T 6493 EN. TROVIS 6400 Automation System TROVIS 6493 Compact Controller. For panel mounting (front frame 48 x 96 mm/1.89 x 3.
Data Sheet T 6493 EN TROVIS 6400 Automation System TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and
Communication & Networking
SXA AS-Interface SXA AS-Interface (Communication Terminal and Repeater) AS-Interface Communication Terminals (Slave Modules) IP67 I/O Module AS-Interface Ver.. compliant, capable of connecting 6 slaves
Technical Data. C-DIAS-MULTI l/o MODULE CIO 013
C-DIAS-MULTI l/o MODULE CIO 013 C-DIAS-Multi I/O Module CIO 013 6 x digital inputs (+24V, 5mA, 5ms) input 3 useable as interrupt (+24V, 5mA, 10 s) 2 x digital counter inputs (+5V, 5mA, 1 s) 8 x digital
OPERATION MANUAL - DS-MOD-
Description Characteristic features Transducer electronics with current output 4...20 ma or voltage output 0...10 V For ceramic pressure sensor series DS-KE or other bridge signals Adjustment over potentiometer