AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
|
|
|
- Ashley Sharp
- 5 years ago
- Views:
Transcription
1 via PROFI or PROF AS-i 3.0 Gateways, via PROF or PROFI 22 / 1 Master, PROF / PROFI Slave AS-i Safety input slaves report via AS-i Safety output slaves switch via Up to 32 release circuits up to 6 CAT4, SIL 3 safe output circuits on the Monitor safe relays or fast electronic Safe AS-i outputs are supported up to 32 independent AS-i outputs Multiple safe AS-i outputs possible via a single AS-i address 1 Safety Monitor for networks Operation using a single Monitor configuration! Monitor processes safety slaves on two s Coupling between the two networks superfluous (Figure similar) Monitor configuration can be arbitrarily large 256 devices (previously 48) Identical reaction time due to artificial limitation to 256 devices Applications up to category 4/PLe/SIL 3 Chip card for storage of configuration data Figure Type Inputs safety, Outputs Safety, SIL 3, cat. 4 Safety outputs, independent according to SIL 3, Safety communication + + Number of AS-i number of AS-i Master Masters 1 AS-i Master Masters Masters 1 power supply, 1 gateway for 2 AS-i inexpensive power supplies no, max. 8A/, redundant supply Diagnostic and configuration interface Ethernet Ethernet RS 232 RS 232 Article No. BWU2598 BWU2214-1, 1 AS-i Masters RS 232 BWU We reserve the right to change any data Mannheim, page 1
2 via PROFI or PROF Figure Type Inputs safety, Outputs Safety, SIL 3, cat. 4 Safety outputs, independent according to SIL 3, Safety communication + Number of AS-i number of AS-i Master Masters Masters Masters 1 power supply, 1 gateway for 2 AS-i inexpensive power supplies no, max. 8A/, redundant supply Diagnostic and configuration interface RS Ethernet 1 RS Ethernet 1 RS Ethernet 1 Article No. BWU2383 BWU2421 max. 31 x 2 6 release circuits; fast electronic safe max. 31 outputs + 1, 1 AS-i Master Ethernet 1, AS-i Control Tools via RS-232 and Ethernet (RJ-45 PROF-Interface) Article no. BWU2479 BWU2214 / Interface PROFI BWU2598 / BWU2383 / BWU2421 / Baud rates 9,6 kbaud up to kbaud, automatic recognition DP functions imaging of the AS-i slaves as I/O data of the PROFI complete diagnosis and configuration via the PROFI DP PROF PROF interface RJ-45 Conformance Class B Baud rates 10/100MBaud AS-i Cycle time 150 μs * (number of slaves + 2) Operating voltage AS-i voltage 3 DC Display LCD indication of slave addresses and error messages in plain text LED PROF green: PROF-Master recognized red: PROF-Master not recognized LED PROFI PROFI master recognized LED power power on LED config error configuration error LED U AS-i AS-i voltage OK LED AS-i active AS-i normal operation active LED prg enable automatic addresses programming enabled LED prj mode configuration mode active LED AUX auxiliary power LED 1.Y1, 1.Y2, 2.Y1, 2.Y2 state of inputs: (EDM/Start) LED K1... K4 state of outputs: LEDs SI1... SI6 state of inputs: LEDs SO1... SO6 state of outputs: page 2 Mannheim, We reserve the right to change any data
3 via PROFI or PROF Article no. BWU2479 BWU2214 / UL-specifications (UL508) External Protection In general ctüvus BWU2598 / BWU2383 / BWU2421 / an isolated source with a secondary open circuit voltage of 3 DC with a 3A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the above devices. the devices BWU2214 BWU2383 BWU2421 BWU2479 BWU2598 from Bihl + Wiedemann GmbH were safety certified by TÜV Rheinland of North America, Inc. according to UL-standards and meet the safety requirements for the North American market. Norms EN EN EN EN :2005, SIL 3 EN :2006, SIL 3 EN ISO :2008/AC:2009, Performance-Level e EN ISO :2008 Environment Housing stainless steel Ambient operating 0 C +55 C temperature Storage temperature -25 C +85 C Protection category IP20 IEC Tolerable loading referring to according EN impacts and vibrations Voltage of insulation 50 Weight 800 g Dimensions (B / H / T in mm) 75 / 120 / / 120 / / 120 / / 120 / / 120 / We reserve the right to change any data Mannheim, page 3
4 via PROFI or PROF Article no. BWU2479 BWU2214 / BWU2598 / BWU2383 / BWU2421 / Safety monitor Start delay < 10 ms Max. turn-off time < 40 ms Card slot Chip card for storage of configuration data Input Inputs Safety 3 x 2 or Inputs digital, EDM 4 6 standard inputs Switching current statical 4mA at, dynamic 30mA at (T=100 μs) statical 4mA at, dynamic 15mA at (T=100μs) Power supply out of AUX Tolerated test pulse adjustable Output Number of release circuits on the 4 6 monitor Outputs relay outputs (output circuits 1 and 2) max. contact load: 3A AC-15 at 3, 3A DC-13 at 3 semiconductor output max. contact load: 1,2A DC-13 at 3, = 7,2A in sum 1 semiconductor outputs (output circuits 3 and 4): max. contact load: 0,5A DC-13 at 3 Power supply out of AUX (semiconductor outputs) Test pulse (semiconductor outputs) if output is on: minimum interval between 2 test pulses: 250ms (as from Safety Version 4.3); maximum pulse width 1ms if output is on: minimum interval between 2 test pulses: 250ms; maximum pulse width 1ms 1 Derating output current 7,2A I AUX, max [A] 5A T amb [ C] page 4 Mannheim, We reserve the right to change any data
5 via PROFI or PROF Operating current Master power supply, Master power supply, Version 1 gateway, 1 power Article no. ca. 300mA out of AS-i circuits max. 300mA out of AS-i circuit 1 supply, for networks, (approx. 70mA mA), approx. 300mA (PELV voltage) max. 300mA out of AS-i circuit 2 (approx. 70mA mA); in sum max. 370mA BWU2214 BWU2383 BWU2421 BWU2479 BWU2598 BWU2214 / BWU2421 BWU2479 / BWU2598 / BWU2383 / / / Redundant power supply out of AS-i: all fundamental functions of the device remain available even in case of power failure in one of the two s Current measurement of the AS-i circuits Self-resetting adjustable fuses AS-i earth fault monitor distinguishes between AS-i cable and sensor cable In version 1 gateway, 1 power supply for circuits : only 1 gateway + 1 AS-i power supply is needed for both 2AS-icircuits Safety outputs block diagram BWU2214,, BWU2383, BWU2421, BWU2598,, : Safety outputs block diagram 24 V SO1 0 V SO2 SO3 SO4 SO5 SO6 We reserve the right to change any data Mannheim, page 5
6 via PROFI or PROF Variations of terminal configuration Terminal Safe output Safe input for mechanical contacts in combination with T1, T2 Safe antivalent input Safe electronic input Standard input SI1,2 SI3,4 SI5,6 SO1,2 1 SO3,4 1 SO5,6 1 1 If outputs are configured as inputs, the input current has to be limited by an external element at 100mA Connections: Gateway + Safety Monitor: BWU2214, BWU2421 BWU Y Y Y Y1 + 3 ASI 1 +PWR- (max. 8A) + ASI Y Y2 nc Y Y2 ASI 2 +PWR- (max. 8A) ASI 1 +PWR- (max. 4A) page 6 Mannheim, We reserve the right to change any data
7 via PROFI or PROF, BWU2383,, BWU Y Y ASI 2 ASI +PWR- (max. 8A) Y Y2 ext. ASI 1 +PWR- (max. 4A) T2 SI2 SI4 SI6 T1 SI1 SI3 SI5 Safe inputs / Standard inputs Connection Description SI1, SI3, SI5 Safe input terminal (T1) SI2, SI4, SI6 Safe input terminal (T2) T1 Clock output 1 T2 Clock output 2 SO1... SO6 Safe semiconductor outputs , Power supply for local I/Os +ASI 1- Connection of AS-i circuit ASI +PWR- Power supply for Gateway and s + ASI 1 SO5 SO6 SO1 SO2 SO3 SO4 Safe outputs ASI +PWR- (max. 4A) Accessories: Safe contact expander, 1 or 2 independent (art. no. BWU2548 / BWU2539) 3 G2 and AS-i Control Tools with serial cable for AS-i Master/Monitors in Stainless Steel (art. no. BW2071) AS-i Power Supply 4A (art. no. BW1649) / AS-i Power Supply 8A (art. no. BW1997 For devices with PROFI interface: Serial PROFI Master (art. no. BW1258) PROFI-DP Master simulator (art. no. BW1257) We reserve the right to change any data Mannheim, page 7
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via or AS-i 3.0 Gateways, safe via or 2 / 1 Master, / Slave AS-i Safety input slaves report via safe AS-i Safety output slaves switch via safe Up to 32 release circuits up to 6 CAT4, SIL 3 safe output
AS-i 3.0 EtherCAT Gateways with integrated Safety Monitor
AS-i 3.0 EtherCAT Gateways with 2 / 1 Master, EtherCat Slave 1 Safety Monitor for 2 s Operation using a single Monitor! Monitor processes safety slaves on two s Coupling between the two networks superfluous
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways AS-i 3.0 Gateways 2 / 1 AS-i Master, Slave 1 AS-i Safety Monitor for 2 s Operation using a single Monitor! Monitor processes safety slaves on two s Coupling between the two networks superfluous
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via BUS or NET AS-i 3.0 Gateways, safe via NET or BUS 2 / 1 Master, NET / BUS Slave AS-i Safety input slaves report via safe AS-i Safety output slaves switch via safe Up to 32 release circuits up
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via BUS or NET AS-i 3.0 Gateways, safe via NET or BUS safe and Safe Link in one device up to 450 devices 2 / 1 Master, NET / BUS Slave AS-i Safety input slaves report via safe AS-i Safety output slaves
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways 2 / 1 AS-i Master, Slave 1 AS-i Safety Monitor for 2 s Operation using a single Monitor! Monitor processes safety slaves on two s Coupling between the two networks superfluous Up to 32
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways AS-i 3.0 Gateways 2 / 1 AS-i Master, Slave 1 AS-i Safety Monitor for 2 AS-i networks Operation using a single Monitor configuration! Monitor processes safety slaves on two AS-i networks
AS-i 3.0 EtherNet/IP + Modbus TCP-Gateways with integrated Safety Monitor
AS-i 3.0 -Gateways 2 / 1 AS-i Master, -Slave 1 switch integrated up to 32 release circuits up to 6 release circuits SIL 3, cat. 4 on the Monitor Safe AS-i outputs are supported up to 32 independent AS-i
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via BUS or NET AS-i 3.0 Gateways, safe via NET or BUS safe and Safe Link in one device up to 450 devices 2 / 1 Master, NET / BUS Slave AS-i Safety input slaves report via safe AS-i Safety output slaves
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways AS-i 3.0 Gateways 2 / 1 Master, Slave 1 AS-i Safety Monitor for 2 AS-i networks Operation using a single Monitor configuration! Monitor processes safety slaves on two AS-i networks Coupling
AS-i 3.0 PROFINET-Gateways with integrated Safety Monitor
AS-i 3.0 PROFI Gateways with Master, 1 PROFI Slave Up to 32 release circuits up to 6 safe output circuits on the Monitor safe relays or fast electronic safe outputs up to 32 independent AS-i outputs Multiple
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways 2 AS-i Masters, 1 PROFIBUS Slave Up to 32 release circuits up to 6 CAT4, SIL 3 safe output circuits on the Monitor safe relays or fast electronic safe outputs up to 32 independent AS-i
AS-i 3.0 EtherNet/IP + Modbus TCP-Gateways with integrated Safety Monitor
AS-i 3.0 -Gateways 2 / 1 AS-i Master, -Slave (1) switch integrated Up to 64 release circuits up to circuits SIL 3, cat. 4 on the Monitor, relays or fast Safe AS-i outputs are supported up to 32 independent
AS-i 3.0 Sercos Gateways with integrated Safety Monitor
AS-i 3.0 Sercos Gateways with Safety on Sercos and Safe Link in one device up to 456 Devices Safely monitoring safety drives with Safety on Sercos 2 / 1 AS-i master, Sercos slave switch integrated (figure
AS-i Safety Output Module with Diagnostic Slave, 1 EDM input, 3I and 2O
ext. in ext. in Safety Output Module with Safety and standard I/O in one module Electronic safety output Additional 3 standard inputs, 1 EDM input, 2 outputs IEC 61508 SIL 3, EN ISO 13849-1 PLe Cat 4,
Article no. BWU2045: AS-i Safety Relay Output Module with Diagnostic Slave and 1 EDM Input 1.23 NC
Safety + standard I/O in one module AS-i Safety relay output with galvanically isolated contact sets, approved up to 230 V IEC 61508 SIL 3, EN ISO 13849-1/PLe Kat 4, EN 62061 SIL 3 Protection category
AS-i Safety Relay Output Module with Diagnostic Slave and 1 EDM Input
Safety + standard I/O in one module Safety relay output with galvanically isolated contact sets, approved up to 230 V IEC 61508 SIL 3, EN ISO 13849-1/PLe Kat 4, EN 62061 SIL 3 Protection category IP20
AS-i Safety Relay Output Module with Diagnostic Slave, 1 EDM, 1 x 2 channel Safe Input
ext. in ext. in AS-i Safety Relay Output Module with Safety + standard I/O in one module Safety relay output with galvanically isolated contact sets, approved up to 230 V Additionally 1 EDM input, 1 x
Encoder signal/ Sensor signal. Number of monitored axes. sine/cosine, SSI, TTL (1) up to 2 independent axes. sine/cosine. up to 2 independent axes
w AS-i Speed Monitor for sine/cosine encoder for HTL encoder for SSI encoder for TTL encoder for sensors for 2 fast electronic safe outputs 128 devices Supplied out of AS-i and external 24 V (figure similar)
AS-i Safety Output Module, IP20
a AS-i Safety Output Module Safe outputs and standard inputs in one module Protection category IP20 Figure Housing Inputs digital Outputs Safety, SIL3, cat.4 Input voltage (sensor supply) 1 Output voltage
AS-i Safety Input Modules (M12), IP67
Input Modules (), IP67 Input Modules (), IP67 for opto, floating contacts or complementary switch Applications up to category 4/PLe/SIL 3 (Figure similar) Figure Type Inputs, SIL 3, cat. 4 4 x, 4 x, 4
AS-i / IO-Link Module, IO-Link Master with 4 IO-Link Ports
/ IO-Link Module, /IO-Link Module, IO-Link Master with 4 s fourfold IO-Link Master in one housing Power supply of s (or ) (Figure similar) Figure Type Inputs digital 4 x + 4 x + 4 x Outputs digital M12
AS-i Safety Analog Input Module, IP20
2 safe inputs in one module: 4... 20 ma or 0... 10 V or Pt100 or thermocouple (type J / K / N / R / S) Applications up to category 4/PLe/SIL 3 (figure similar) The AS-i Safety Input Module for analog inputs
AS-i / IO-Link Module, IO-Link Master with 4 IO-Link Ports
/ IO-Link Module, /IO-Link Module, IO-Link Master with 4 s fourfold IO-Link Master single in one housing Power supply of s out of AUX (or ) Figure Type Inputs digital 8x M 8x M 4 x + 4 x + Outputs digital
Digital Modules AS-i, IP67, M12
Digital Modules, IP67, M1 x connectors for color LEDs per output, state (yellow), overload (red) BWU487 / BWU547 / BWU55 / BWU594 / BWU60 / BWU713 / BWU75 / BWU78 (Figure similar) BWU617 / BWU619 / BWU66
Analog Modules AS-i, IP67, M12
Analog Modules, M12 2 x 2 connectors for compact housing, IP67 (Figure similar) Figure Type Inputs analog Outputs analog M12 connection Input voltage (sensor supply) Output voltage (actuator supply) (2)
Digital Modules AS-i in IP20, 22,5 mm
Digital Modules AS-i in 22,5 mm Cost efficient solution in IP20 (Figure similar) Figure Type Housing s digital digital voltage (sensor supply) (1) Output voltage (actuator supply) (2) AS-i connection (3)
Active Distributors ASi Safety, IP67
x connectors for profile cable Periphery connection via M8 cable sockets M cable sockets (Figure similar) Figure Type Inputs, SIL 3, Cat. 4 9 mm 9 mm 9 mm 9 mm channels channels channels channels Inputs
Active Distributors AS-i Safety, Active Distributors AS-i
Active Distributors Safety, Active Distributors x connectors for Periphery connection via, M cable sockets or push in terminals (Figure similar) Figure Type Inputs Safety, SIL, Cat. x 9 mm, -channels Safety
AS-i 3.0 motor module
3.0 motor module 3.0 motor module for two 4 V motorized rollers Itoh Denki (PM00ME/XE/XP, PM60ME/XE/XP) with 4 binary and analog outputs Mixed input/output slave Speed setting of parameter Protection category
AS-i 3.0 Motor modules
AS-i 3.0 motor modules for two 4 V motorized rollers e.g. Interroll (EC00, EC300, EC310) or RULMECA (RDR BL-) or Itoh Denki (PM00ME/XE/XP, PM60ME/XE/XP) slaves in one module 1 Single Slave with - s - digital
AS-i Safety Relay Output Module with Diagnostic Slave
AS-i Safety Relay Output Module with Diagnostic Slave User Manual...supports the requirements for AS-i Safety up to SIL3 Revision date: 2016-03-9 Subject to modifications without notice. Generally, this
AS-i 3.0 motor modules
AS-i 3.0 4I/4O modules for two 4 V motorized rollers e.g. Interroll (EC00, EC300 or EC30) or RULMECA (RDR BL-) or Rollex (type 840) with binary and analog outputs Mixed input/output slave Speed setting
Analog Modules AS-i IP65, M12
Plug and Play as simply as digital AS-i I/O BWU1361 / BWU1362 / BWU1722 / BWU1853 / BWU1917 / BWU1363 / BWU2532 / BWU1359 / BW1360 / BWU1893 BWU1894 BWU1895 BWU1963 BWU1964 Housing, construction: IP65,
AS-i Safety Relay Output Module with Diagnostic Slave
AS-i Safety Relay Output Module with Diagnostic Slave User Manual Revision date: 2013-01-30...supports the requirements for AS-i Safety up to SIL3 Subject to modifications without notice. Generally, this
Phone: Fax: Web: -
In automated systems, sensors and actuators must interact with one another functionally and safely. The necessary coordination is performed by the programmable Safety Controller. The controller monitors
System manual AS-i safety monitor AC041S /00 05/2013
System manual AS-i safety monitor AC041S UK 7390926/00 05/2013 Contents 1 Preliminary note...4 1.1 Symbols used...4 2 Safety instructions...5 3 Items supplied...6 4 Functions and features...6 5 Structure
Pluto AS-i. Safety PLC. Approvals: Control of: Features:
Safety PLC Pluto AS-i Approvals: TÜV Rheinland Control of: Safety products in dynamic and static circuits as well as in AS-i networks Electrically controlled actuators such as contactors, valves, motors
PCB AS-i modules, board based solutions
Special variants on request (Figure similar) PCB modules, board based solutions Circuit Inputs board dimensions digital Inputs analog Outputs digital Connection Coated LED status display 4 Input voltage
The safety control of the next generation
samos pro samos pro compact The safety control of the next generation With the highest power in the smallest space, the safety control samos pro compact sets new standards in the area of machine automation.
CONFIGURABLE SAFETY RELAYS
CONFIGURABLE SAFETY RELAYS The cycle control function of the configurable MSI allows efficient semi-automatic processes Special features Single or double-cycle operation with 0 s / 0 min time monitoring
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits User manual DP/V0 and DP/V1 AS-i 3.0 specification Revision date: 2008-10-22 Subject to modifications without notice. Generally,
CSI 6300 SIS Overview
Overview The Digital Overspeed Protection System is TÜV - certified according to IEC 61508:2010 and provides speed measurement and detection of rotational direction for rotating machines such as turbines,
Original operating instructions. Fail-safe SmartPLC with Profinet slave interface AC402S /00 06/2016
Original operating instructions Fail-safe SmartPLC with Profinet slave interface AC402S UK 80237419/00 06/2016 Contents 1 Preliminary note...4 1.1 Notes on this document...4 1.2 Symbols used...4 2 Safety
Technical data. Dimensions: see page 116. ): 4 kv Rated insulation voltage (U i Over-voltage category: Power supply. Rated operating voltage (Un):
Safety module CS AR-91, according to EN 81 Safety modules for the lift automatic floor levelling operation according to EN 81 Main functions For safety applications up to SIL 3 / PL e Choice between automatic
Can be configured in the PNOZmulti Configurator Semiconductor outputs: or 4 safety outputs in accordance with EN 954-1, Cat. 3
Products Expansion Gertebild mo1p modules PNOZmulti Verwendung/Bildunterschrift_multi_Modul Expansion module for connection to a base unit from the configurable control system PNOZmulti Approvals Unit
SECTION 16 LED DIAGNOSTIC FEATURES: EXPANSION UNITS: SCR-31P-i. SCR-73-i. SEU-31-i. SCR-31-42TD-i. SEU-31TD-i
SECTION 16 VIPER Safety Relays Type: SCR-i (with added diagnostics) SAFETY RELAY FUNCTION: IDEM s VIPER SCR-i range of Safety Relays have been designed in accordance with EN60204-1 for safety circuits
MSR178DP. Description. Features. Specifications
MSR178DP Description The MSR178DP is a multi-function time-delay relay for use in safety circuits. It can be configured by the user to perform on-delay, offdelay or single-pulse modes. It is used for applications
4 non-safe digital I/O channels 2 IO-Link Master V1.1 slots. Figure 1. Figure 2. Type designation. TBPN-L1-FDIO1-2IOL Ident-No
PROFINET slave Integrated Ethernet switch 100 Mbps supported 2 x M12, 4-pin, D-coded, Ethernet fieldbus connection Glass fiber reinforced housing Shock and vibration tested Fully potted module electronics
AS-Interface Safety at Work
AS-Interface Safety at Work Safety Monitor, Coupling adjacent AS-i networks with the Safety Monitor provides the option of a cross-network E-Stop connection and a global restart, especially with large
4 non-safe digital I/O channels 2 IO-Link Master V1.1 slots. Figure 1. Figure 2. Type designation. TBPN-L1-FDIO1-2IOL Ident no
PROFINET slave Integrated Ethernet switch 100 Mbps supported 2 x M12, 4-pin, D-coded, Ethernet fieldbus connection Glass fiber reinforced housing Shock and vibration tested Fully potted module electronics
EtherNet/IP. Integrated Ethernet switch 10 Mbps / 100 Mbps supported 2 x male M12, 4-pin, D-coded, Ethernet-Fieldbus
EtherNet/IP Integrated Ethernet switch 10 Mbps / 100 Mbps supported 2 x male M12, 4-pin, D-coded, Ethernet-Fieldbus connection Glass fiber reinforced housing Shock and vibration tested Fully potted module
Industrial Safety Systems
DATA SHEET Industrial Safety Systems Modular Safety Controller Flexi Soft PDF processed with CutePDF evaluation edition www.cutepdf.com Modular safety controller Flexi Soft Safety controllers Overview
FACTORY AUTOMATION. MANUAL VAA-2E-G4-SE Original Instructions Version 1.1
FACTORY AUTOMATION MANUAL VAA-2E-G4-SE Original Instructions Version 1.1 With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery
QUINT-PS/ 1AC/24DC/ 5
Extract from the online catalog QUINT-PS/ 1AC/24DC/ 5 Order No.: 2866750 DIN rail power supply unit 24 V DC/5 A, primary switched-mode, 1- phase. The SFB technology (Selective Fuse Breaking Technology)
Original operating instructions Safety relay with relay outputs with and without delay G1502S / / 2016
Original operating instructions Safety relay with relay outputs with and without delay UK G50S 803638 / 00 0 / 06 Contents Preliminary note...4. Symbols used...4 Safety instructions...5 3 Items supplied...6
Datasheet - CSS 11-30S-D-M-ST
12.02.2013-18:42:30h Datasheet - CSS 11-30S-D-M-ST Safety sensors / CSS 30S Preferred typ Stainless steel enclosure Max. 31 sensors can be wired in series. Connector M12, 8-pole Ø M30 High repeat accuracy
Quantum III. Compact DC Drive Package. Slitter DC Drive Package. Quantum III
Compact DC Drive Package The delivers a DC drive package that integrates the intelligence of the Mentor II with a space saving design that incorporates many accessories typically required in the North
G9SX-GS. Safety Guard Switching Unit. A Safety Measure for Hazardous Operations That Does Not Lower Productivity. Auto Switching Function
Safety Guard Switching Unit CSM DS_E_6_1 A Safety Measure for Hazardous Operations That Does Not Lower Productivity Two functions support two types of application: Auto switching: For applications where
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Block diagram Unit features Positive-guided relay outputs: 6 safety contacts (N/O), instantaneous 4 auxiliary
Compact Coded Magnetic Safety Interlock Switch and Control Units
C Conforms to EN292, EN60204-1, EN954-1, EN1088, EN60947-5-3, EN947-5-3, EN50081, EN50082, EN61000-6-2 UL and C-UL listed, TUV certified Description R US Compact Coded Magnetic Safety Interlock Switch
DIRIS A-30 Multifunction power metering & monitoring device - PMD
Single-circuit metering, measurement & analysis The solution for > Industry > Building > Infrastructures diris_986_a_us.psd Strong points Function The is a power metering and monitoring device that provides
MIC-2 Multi-instrument DATA SHEET
Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional) Profibus DP (optional) I/O modules
Making Hazardous Operations Safe and Productive
NEW Safety Guard Switching Unit G9SX-GS Making Hazardous Operations Safe and Productive Making Hazardous Operations Safe and Productive This new addition to the model of Flexible Safety Unit G9SX series
TwinSAFE Compact Controller
Controller EK1960 Compact Controller The EK1960 Compact Controller extends the application range of the integrated safety solution. Thanks to its compact design, with 20 safe digital inputs and 24 safe
CompactBlock Guard I/O EtherNet/IP Safety Modules
Installation Instructions CompactBlock Guard I/O EtherNet/IP Safety Modules Catalog Numbers 1791ES-IB8XOBV4, 1791ES-IB16 Topic Page Important User Information 2 North American Hazardous Location Approval
119.4 mm. Aux. 3 PNP (Aux., Fault, Weak) 7 PNP (Aux., Fault, Weak & Ch 1-4) 7 PNP (Aux./Mute lamp, Fault, Weak & Ch 1-4) Yes
MACHINE SAFETY ACCESSORIES 519 CONTROLLERS GRIDS & POINTS INTERLOCKS E-STOP BUTTONS CONTROLLERS Fiber Optic Four optical channels protect personnel from hazardous equipment and to protect critical tooling
ATV930U30M3 variable speed drive - ATV930-3kW - 200/240Vwith braking unit - IP21
Characteristics variable speed drive - ATV930-3kW - 200/240Vwith braking unit - IP21 Main Range of product Product or component type Device application Device short name Variant Product destination Mounting
PSR-PC50. SIL 3 coupling relay for safety-related switch on. Data sheet. 1 Description
SIL 3 coupling relay for safety-related switch on Data sheet 105818_en_01 PHOENIX CONTACT 2014-08-18 1 Description The PSR-PC50 SIL coupling relay can be used for power adaptation and electrical isolation
SAFETY RELAY YRB-4EML-31S MAIN FEATURES
SAFETY RELAY TYPE 4 SAFETY PROTECTION DEVICE FOR SAFETY LIGHT CURTAINS/BARRIERS MAIN FEATURES For safety light curtains and access control barriers, emergency stop, door switch Safety Integrity Level (SIL)
NX integrated safety System configuration. Integrated safety into machine automation
NX-S@ NX integrated safety Integrated safety into machine automation The safety controller meets Category 4, PLe according to the ISO 13849-1 and SIL3 according to the IEC 61508 Flexible system lets you
POWER ELECTRONICS / SD700 SERIES SD700 VARIABLE SPEED DRIVES
POWER ELECTRONICS / SD700 SERIES SD700 VARIABLE SPEED DRIVES SD700 SERIES is the core of the family, available from 1.5kW to 2200kW [1], a voltage range from 230VAC to 690VAC and available 6, 12, 18 and
Product Overview. by Bihl+Wiedemann
Product Overview by Bihl+Wiedemann About Bihl+Wiedemann Bihl+Wiedemann GmbH, founded in 1992 by Jochen Bihl and Bernhard Wiedemann, is a highly specialized, internationally operating engineering company
to 12a Added Standard and Electrical requirements for UL table 1.1
Document changes and version status C-DIAS SAFETY DIGITAL INPUT MODULE CSDI 162 Change date Affected page(s) Changes/expansions/corrections Version 19.12.2013 12 to 12a Added Standard and Electrical requirements
Assembly. Front view. LED yellow: Relay output. LED red: LB/SC Power Rail
Switch Amplifier Features Assembly -channel isolated barrier 4 V DC supply (Power Rail) Dry contact or NAMUR inputs Relay contact output Line fault detection (LFD) Reversible mode of operation Up to SIL
Smart Energy & Power Quality Solutions. ProData datalogger. Datalogger and Gateway
Smart Energy & Power Quality Solutions ProData datalogger Datalogger and Gateway Smart and compact: Our most universal datalogger ever saves power costs Ethernet connection Modbus-Ethernet-Gateway 32 MB
ATV650U30N4E variable speed drive ATV650-3kW V - IP55 - disconnect switch
Characteristics variable speed drive ATV650-3kW - 380...480V - IP55 - disconnect switch Main Range of product Product or component type Product specific application Device short name Variant Product destination
20 inputs for connecting, for example:
Products Base Gertebild units m1p (ETH) Verwendung/Bildunterschrift_multi_Basis Base unit from the configurable control system PNOZmulti Approvals Zulassungen PNOZ m1p Unit features Gertemerkmale_multi_Basis
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 5 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Connection
Expansion Unit G9SX-EX Safety 2 Instantaneous safety outputs
Flexible Safety Unit / Safety Guard Switching Unit G9SX/G9SX-GS CSM_G9SX_G9SX-GS_DS_E_8_1 Logical Function Adds Flexibility to Various Safety Circuits Be sure to read the Safety Precautions on page 45.
SENSICK AS-i Components. Technical Description
SENSICK AS-i Components Technical Description AS-i Applications AS-i Applications Central control of complex processes in the packaging industry with AS-i. To Control System AS-i classic field modules
Original operating instructions Safety relay with relay outputs G1501S / / 2016
Original operating instructions Safety relay with relay outputs G50S UK 8023637 / 00 02 / 206 Contents Preliminary note...4. Symbols used...4 2 Safety instructions...5 3 Items supplied...6 4 Functions
Power Supply HARTING pcon
HARTING pcon 2060 Advantages Compact design and high power density Easy installation and tool-less connection Wide input range for world-wide use Wide operating temperature range (up to 70 C without derating)
XPSMF40. Main. Safety module name. Monitoring safety detection discrete input Monitoring safety dialogue discrete output
Product datasheet Characteristics XPSMF4000 Preventa safety PLC compact - Safe Ethernet Main Range of product Product or component type Safety module name Safety module application Preventa Safety automation
Datasheet - MZM 100 B ST-1P2PW2REM-A
19.07.2016-15:57:28h Datasheet - MZM 100 B ST-1P2PW2REM-A Solenoid interlock / MZM 100 Preferred typ Actuator monitored Automatic latching Solenoid interlocks (for the protection of man) with innovating
ASI SAFETY & MESUREMENT. SG4-FINGER SERIES. APPlICATIONS
SAFETY FINGER PROTECTIONlIGhT CURTAINS SG4-FINGER SERIES The series of SAFEasy TM SG4-B FINGER safety light curtains widens the existing SG range, whilst representing an evolution of the SE4-PLUS line,
Channel Digital Input Module 24 V DC High-side switching
0-0 -Channel Digital Input Module DC High-side switching 0-0 0-0... 9 0 connection 9 9 0 0 0nF 0nF The digital input module provides channels at a width of just mm (0.in). It receives binary control signals
Safety Temperature Limiter TT-STL 50
GmbH Postal address: House address Fon (+49) 0 22 42-8703-0 Postbox 1261 Löhestr. 37 Fax (+49) 0 22 42-8703-20 http: // www.tematec.de 53759 Hennef 53773 Hennef e-mail: team@tematec.de Safety Temperature
AS-i Safety. Two-wire bus system.
AS-i Safety Two-wire bus system Contents Page 1 Why should I use the bus system at component level? 3:2 AS-i Safety from ABB Jokab Safety 3:4 Pluto AS-i 3:6 Why should you use safety node Urax? 3:11 Safety
ILBPB24DO32. Inline Block IO Module for PROFIBUS With 32 Digital Outputs. AUTOMATIONWORX Data Sheet 6889_en_04. Description
Inline Block IO Module for PROFIBUS With 32 Digital Outputs AUTOMATIONWORX Data Sheet 6889_en_04 Description PHOENIX CONTACT - 03/2007 & & ' ) The ILB PB 24 DO32 module is designed for use within a PROFIBUS
QUINT-PS/ 1AC/24DC/20/CO
Extract from the online catalog QUINT-PS/ 1AC/24DC/20/CO Order No.: 2320898 DIN rail power supply unit 24 V DC/20 A/CO, dip-coated circuit board, primary-switched, 1-phase. For the first time, SFB (selective
QUINT-PS/1AC/24DC/10. Extract from the online catalog. Order No.:
Extract from the online catalog QUINT-PS/1AC/24DC/10 Order No.: 2866763 DIN rail power supply unit 24 V DC/10 A, primary-switched mode, 1- phase. The SFB technology (Selective Fusebreaking Technology)
MIC-2 MKII & MIC-2 MKII DIN, Multi-instrument DATA SHEET
& DIN, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)
Online data sheet. FX3-XTDS84002 Flexi Soft / Safe EFI-pro System SAFETY CONTROLLERS / SAFETY SYSTEMS
Online data sheet FX3-XTDS84002 Flexi Soft / Safe EFI-pro System A B C D E F H I J K L M N O P Q R S T Detailed technical data Features Module Configuration method Safety-related parameters Ordering information
Online data sheet. i200-m0413 Lock i200 Lock SAFETY LOCKING DEVICES
Online data sheet i200-m03 Lock i200 Lock i200-m03 Lock i200 Lock A B C D E F actuator not supplied with delivery Ordering information Type Part no. i200-m03 Lock 6025115 The actuator has to be ordered
Online data sheet. i110-e0453 i110 Lock SAFETY LOCKING DEVICES
Online data sheet i0-e0453 i0 Lock i0-e0453 i0 Lock A B C D E F actuator not supplied with delivery Ordering information Type Part no. i0-e0453 6051601 The actuator has to be ordered separately. See "Accessories"
Datasheet - MZM 100 B ST2-1P2PW2RE-A
19.03.2014-11:42:51h Datasheet - MZM 100 B ST2-1P2PW2RE-A Solenoid interlock / MZM 100 Preferred typ Actuator monitored Automatic latching Solenoid interlocks (for the protection of man) with innovating
Datasheet - RSS 36-D-R-ST
14.03.2018-19:30:37h Datasheet - RSS 36-D-R-ST Safety sensors / RSS 36 Thermoplastic enclosure RFID-technology for needs-based protection against tampering Misaligned actuation possible 27 mm x 108.2 mm
Operating instructions AC010S Compact AS-i E-STOP safety module
Operating instructions AC010S Compact AS-i E-STOP safety module Sachnr. 7390636_/00 05/2007 Contents Safety instructions............................. 3 Installation / Setup............................
TSXPAY262 Preventa safety module - 24 V DC - standard format - < 5 W
Characteristics Preventa safety module - 24 V DC - standard format - < 5 W Main Range of product Product or component type Complementary [Us] rated supply voltage Supply voltage limits Activation threshold