XAC34SF2A010 XAC34PM1A000 XAC34PC1A700

Size: px

Start display at page:

Download "XAC34SF2A010 XAC34PM1A000 XAC34PC1A700"

Allan Allison
5 years ago
Views:

X Series X34SF2010 X34PM1000 X34P1700 SPEIFITIONS Designed for external installation, the X is the MR removable contact connector equipped with protective shells and mounting plates for chassis or

1 X Series X34SF2010 X34PM1000 X34P1700 SPEIFITIONS Designed for external installation, the X is the MR removable contact connector equipped with protective shells and mounting plates for chassis or cable mounting on metal containers, bulkheads, or any outside surface equipment. Lighter and smaller than other external connectors, they provide dependable service under adverse conditions. Inserts are housed in protective shells and there is screw lock coupling of plug and receptacle. urrent Rating: Up to 13 amps No. of ontacts: 9, 14, 18, 20, 26, 34, 42, 50, 66, 75, 104 ontacts: ontacts must be ordered separately. Select from crimp, solder, dip solder, shielded or wire wrap terminations. Electrical Data: Meets high potential performance requirements of MIL The dielectric withstanding voltage is one minute electrification at 2000 V. Military versions are QPL d to M28748/3 and M28748/4. TLO NO. X9-0300X MS T8 X X MS T1 X X MS T2 XMRE9-0400X MS S8 XMRE X MS S1 XMRE X MS S2 XMRE X MS18192-T9 XMRE X MS S9 XMRE X MS18192-T3 XMRE X MS S3 XMRE X MS T4 XMRE X MS S4 XMRE X MS18192-T5 XMRE X MS S5 XMRE XP MS T6 XMRE XS MS TXX Dielectric: Polarization: ccessories: TLO NO. XMRE XS MS 18192SXX XMRE XP MS S6 XMR MS T1 XMR MS S1 XMR MS T2 XMR MS S2 XJTMS605P MS XJTMS605S MS XJTMS608P MS XJTMS608S MS XJTMS605P MS XJTMS605S MS XJTMS606P MS XJTMS606S MS XJMS602P MS XJMS602S MS Diallyl Phthalate, MIL-M-14, e SD-F, olor ray Seven positions available for pin and slot polarization on shells. dditional polarization can be provided with various arrangements of jackscrews and guides. Shells, formed and drawn hoods, mounting plates, jackscrews and jacksockets. TLO NO. XJMS603P MS XJMS603S MS XNMS700P MS XNMS700S MS XNMS702P MS XNMS702-S MS XMR MS XMR MS XMR MS XMR MS XMR MS XMR MS XMR MS XMR MS arnes Industrial Road North, Wallingford, onnecticut Phone:(203) Fax:(203) RP / 11

X Series ONNETOR SSEMLIES Self-locking pins Turnable Jacksocket Turnable Jackscrew Male Insert Plug Shell Jackscrew and Jacksocket Knobs Fixed Jackscrew Plate Receptacle Shell Female Insert Fixed

com RP / 12 Plug: The complete connector half which has the plug shell as part of its assembly. Receptacle: The complete connector half which has the receptacle shell as part of its assembly.

2 X Series ONNETOR SSEMLIES Self-locking pins Turnable Jacksocket Turnable Jackscrew Male Insert Plug Shell Jackscrew and Jacksocket Knobs Fixed Jackscrew Plate Receptacle Shell Female Insert Fixed Jacksocket Receptacle DEFINITIONS OF ONNETOR TERMS 62 arnes Industrial Road North, Wallingford, onnecticut Phone:(203) Fax:(203) RP / 12 Plug: The complete connector half which has the plug shell as part of its assembly. Receptacle: The complete connector half which has the receptacle shell as part of its assembly. Shell: The metal housing in which a male or female insert is assembled. shell is either a plug shell or a receptacle shell: Plug Shell - one which is designed to be inserted into a receptacle shell. Receptacle Shell - one which is designed to receive and enclose the plug shell upon engagement. Male Insert: The molded insulator body containing pin contacts. Female Insert: The molded insulator body containing socket contacts. Pin ontacts: Male ontacts that fit into the socket contacts. Socket ontacts: Female ontacts tubular in shape, which receive the pin contacts and retain them by spring tension. Polarization: means of controlling the engagement of a plug and receptacle so that correct mating of the contacts is achieved. ccessories: Those components such as hoods and mounting plates which are attachable to a plug or receptacle to facilitate mounting and/or handling of the connector, and to prevent inadvertent cross-mating.

3 X Series ONTT RRNEMENTS Dimensions are for reference only and are subject to change. Outline drawings on request. Views are rear (wiring end) of female inserts. (Male inserts are opposite.) R R R.130 X 9 X 14 X 18 X R.130 X 26 No. 4 X 34*.180 No X No R.180 X 50* No. 4 No R R.180 No R.180 X 66 X 75 X 104* *For numerical contact identification instead of alphabetical, order XNP or S available in sizes 34, 50, and 104. Sizes 66 and 75 have numerical contact identification as standard. The spacing, arrangement, and identificaion of contacts of the X inserts are the same as those found on the Series MR removable contact connectors for the same number of contacts. 62 arnes Industrial Road North, Wallingford, onnecticut Phone:(203) Fax:(203) RP / 13

4 X Series JKSREW & JKSOKETS Dimensions are for reference only and are subject to change. Outline drawings on request. Views are rear (wiring end) of female inserts. (Male inserts are opposite.).73 Fixed (F) Long Turning () Used With Hoods Short Turning (M) Used Only Without Hoods Monojacks (D) Used With Hoods SPEIFITIONS Turnable jackscrew-jacksocket combination (M,, or D) assembles on either Plug or Receptacle; the mating connector-half (either Receptacle or Plug) must then contain fixed jackscrew-jacksocket combination (F). oth short and long turning jackscrews (M and ) have knurled and slotted knobs for locking by hand or screwdriver. Knob is assembled on shaft with hollow, removable, self-locking pin. Safety wiring of engaged halves is achieved by using the through-hole in self-locking pin in the knob. Monojacks (D) are long turning one-peice locking devices with slotted and knurled head. Shaft has through-hole for safety wire. available with hoods only, in sizes 34, 42, 50, 66, 75, and 104. Drawings show extension of standard knobs beyond shell and beyond hood. PPLITIONS Jackscrew locking device assures positive coupling of engaged connectors to prevent accidental disconnecting from vibration or physical shock. It also aids easy connection and separation of connector plug and receptacle. Mounted connector-half houses one non-turnable fixed jackscrew and jacksocket to insure connector polarization. Mating-half houses one of the three types of turning jackscrew and jacksocket (M,, or D). LOKIN DEVIE } SPEIFITIONS WT. OZ. ODE See Notes MTERIL ND LETTER 1 & 2 FINISH Jackscrew Nickel Plated rass Fixed F 0.15 Jacksocket Jackscrew Short Stainless Steel with Jacksocket} M 0.30 Turnable Passivating Dip Jackscrew Long Stainless Steel with 0.45 Jacksocket} Turnable Passivating Dip Mono-Jackscrew Long Turnable D 1.07 Nickel Plated rass Mono-Jacksocket Knob Standard luminum nodized Note 1: Weights are for pairs; i.e. for a jackscrew and jacksocket, etc., so weight figure may be added once to weights of other accessories when computing total weight of plug or receptacle. Note 2: Weights of turnable jackscrews and turnable jacksockets include knob and rollpins, except mono-jackscrew and mono-jacksocket, which is a one-piece construction (shaft and knob made in one piece); weight of fixed jackscrew and jacksocket includes nuts. Standard Knobs - Extension Dimension Dimension eyond Hood X 9* 14* 18* 20* arnes Industrial Road North, Wallingford, onnecticut Phone:(203) Fax:(203) RP / 14 *On sizes 9, 14, 18, and 20, only large top opening hoods are available when (c) long turning jackscrews are used. atalog Number for large top opening hoods is X. Example: X X

5 X Series OUTLINE - JKSREWS INT. HEX HEX W.19 U X.22 Z Dimensions are for reference only and are subject to change. Outline drawings on request..25 HEX. MW MU UN 2 THD. (TYP.) MX FZ ll jackscrews and sockets are stainless steel, passivated (except F & D which are nickel plated brass). ll knobs are aluminum, anodized except MW and W which are stainless steel, passivated. Hoods Size X 0400X Dimension e W Dimension e U Hoods Size X 0400X Dimension e X Dimension e Z arnes Industrial Road North, Wallingford, onnecticut Phone:(203) Fax:(203) RP / 15

6 X Series OUTLINE HOODS - DRWN LUMINUM Dimensions are for reference only and are subject to change. Outline drawings on request. The X Series uses standard XMR/ XMRE protective hardware. To order separately, use XMRE/XMR catalog numbers indicated Top able Opening XMR Drawn Hoods for use with X onnectors. Hoods - Side able Opening ForUse With e Jack Sockets and Hood Part No. (If ordered separately) D E F XMR x XMR D XMR D Side able Opening e D Jack Sockets and e F XMR D x XMR D D XMR D D XMR x XMR D 1.34 XMR D 1.63 Hoods - Top able Opening ForUse With e Jack Sockets and e D Jack Sockets and e F Hood Part No. (If ordered separately) D E F XMR x XMR D XMR D XMR D x XMR D D XMR D D XMR x.75 XMR D XMR D 62 arnes Industrial Road North, Wallingford, onnecticut Phone:(203) Fax:(203) RP / 16

7 X Series OUTLINE HOODS - FORMED LUMINUM Dimensions are for reference only and are subject to change. Outline drawings on request. XMRE Formed Hoods for use with X onnectors Top able Opening Hoods - Top able Opening For use with Monojacks For use with Monojacks For use with e Jacksockets & For use with e Jacksockets & For use with Fixed * For use with Fixed * Dimensions Hood Part No. (If ordered separately) D able Opening 62 arnes Industrial Road North, Wallingford, onnecticut Phone:(203) Fax:(203) E F XMRE XMRE J XMRE X XMRE XJ XMRE XMRE J XMRE X XMRE XJ XMRE XMRE J XMRE X XMRE XJ XMRE XMRE J XMRE X XMRE XJ XMRE XMRE J XMRE X XMRE XJ XMRE D XMRE XMRE J XMRE XD XMRE X XMRE XJ XMRE D XMRE XMRE J XMRE XD XMRE X XMRE XJ XMRE D XMRE XMRE J XMRE XD XMRE X XMRE XJ XMRE D XMRE XMRE J XMRE XD XMRE X XMRE XJ * For use with, K, or N guides, eliminate letter J from part number Dimensions Hood Part No. (If ordered separately) D able Opening E F Wt. Oz. (Inc. 2 able lamps and ) X X X XJ X X X XJ X X X XJ X X X XJ XMRE XMRE J XMRE X XMRE XJ XMRE D XMRE XMRE J XMRE XD XMRE X XMRE XJ XMRE D XMRE XMRE J XMRE XD XMRE X XMRE XJ XMRE D XMRE XMRE J XMRE XD XMRE X XMRE XJ XMRE D XMRE XMRE J XMRE XD XMRE X XMRE XJ * For use with, K, or N guides, eliminate letter J from part number Hoods - Side able Opening Large Top able Opening Side able Opening Wt. Oz. (Inc. 2 able lamps and ) RP / 17

X Series OUTLINE SHELLS - REEPTLES Dimensions are for reference only and are subject to change. Outline drawings on request..03r..140 4 Holes.20 R..421 R. F.28 Mtg. Hole Style 9.14R E D.384 R.

150 6 Holes Important Note When Ordering Plug and Receptacle Shells The shell part numbers given in the table show an asterisk (*) where the code letter for the desired polarizing position belongs -

4000 Shells are.040 in. thick. Shells are aluminum, anodized for protection against corrosion.

8 X Series OUTLINE SHELLS - REEPTLES Dimensions are for reference only and are subject to change. Outline drawings on request..03r Holes.20 R..421 R. F.28 Mtg. Hole Style 9.14R E D.384 R. E D E D E D.156. E D.312. Polarizing Slot 2 Holes SHELLS - REEPTLES.14R Holes For ll X For X 9 to 26 For X 34, 42, For X 66 For X 75 For X 104 onfigurations and 50 4 Holes Holes Important Note When Ordering Plug and Receptacle Shells The shell part numbers given in the table show an asterisk (*) where the code letter for the desired polarizing position belongs - example: XMRE9-2*000 becomes XMRE when polarization in position is desired. Specify the same position on the mating shell. For non-polarized shells, merely omit this position, e.g. XMRE TYPIL SHELLS FOR MONOJKS STYLE No Shells are.040 in. thick. Shells are aluminum, anodized for protection against corrosion. Either shell style - plug or receptacle - may be used to house the female insert, thus allowing the live socket contacts to be cable or panel mounted, as desired. Shells also provide a means by which connector polarization is accomplished - the receptacle shell is slotted for engaging a polarizing pin on the plug shell. ny of seven positions (,,, D, E, F or ) may be specified for polarization; non-polarized shells have the slot and pin omitted. 62 arnes Industrial Road North, Wallingford, onnecticut Phone:(203) Fax:(203) RP / 18 For onnector Size 34, 42, 50, 66, R Shell Part No. (If ordered Wt. separately) D E F Oz. XMRE 9-2* XMRE 14-2* XMRE 18-2* XMRE 20-2* XMRE 26-2* XMRE 34-2*000 XMRE 34-4* XMRE 42-2*000 XMRE 42-4* XMRE 50-2*000 XMRE 50-4* XMR 66-2*000 XMR 66-4* XMRE 75-2*000 XMRE 75-4* XMR 104-2*000 XMR 104-4* orner Holes 4 orner Holes. 2 Slots 4 Slots For X 34, 42, 50, 66, For X 75 Receptacle Shell and 104 onfigurations onfiguration Style No Shells are.040 in. thick.

X SERIES OUTLINE SHELLS - PLUS Dimensions are for reference only and are subject to change. Outline drawings on request..140 4 Holes.03R D E D E D E 4 Holes D E.14R Mtg. Hole Style 9 F.508 D E.156.

4 Holes Important Note When Ordering Plug Shells The shell part numbers given in the table shows an asterisk (*) where the code letter for the desired polarizing position belongs - example:

040 in. thick. Stainless steel shells available for 66 and 104 sizes. Dimensions vary from those shown for aluminum shells. heck sales for availability and dimensions on all sizes.

9 X SERIES OUTLINE SHELLS - PLUS Dimensions are for reference only and are subject to change. Outline drawings on request Holes.03R D E D E D E 4 Holes D E.14R Mtg. Hole Style 9 F.508 D E Holes.875 For X 104 For X 75 For X 66 For X 34, 42, For X 75 For ll X and 50 For X 9 to 26 onfigurations.421 R. 4 Holes Important Note When Ordering Plug Shells The shell part numbers given in the table shows an asterisk (*) where the code letter for the desired polarizing position belongs - example: XMRE9-1*000 becomes XMRE when polarization in position is desired. Specify the same position on the mating shell. For non-polarized shells, merely omit this position, e.g. XMRE Shells are.040 in. thick. Stainless steel shells available for 66 and 104 sizes. Dimensions vary from those shown for aluminum shells. heck sales for availability and dimensions on all sizes. TYPIL SHELLS FOR MONOJKS STYLE No Shells are aluminum, anodized for protection against corrosion. Either shell style - plug or receptacle - may be used to house the female insert, thus allowing the live socket contacts to be cable or panel mounted, as desired. Shells also provide a means by which connector polarization is accomplished - the receptacle shell is slotted for engaging a polarizing pin on the plug shell. ny of seven positions (,,, D, E, F or ) may be specified for polarization; non-polarized shells have the slot and pin omitted. For onnector Size 34, 42, 50, 66, R R. 6 Holes.500 Shell Part No. (If ordered Wt. separately) D E F Oz. XMRE 9-1* XMRE 14-1* XMRE 18-1* XMRE 20-1* XMRE 26-1* XMRE 34-1*000 XMRE 34-3* XMRE 42-1*000 XMRE 42-3* XMRE 50-1*000 XMRE 50-3* XMR 66-1*000 XMR 66-3* XMRE 75-1*000 XMRE 75-3* XMR 104-1*000 XMR 104-3* Slots 4 orner Holes 4 orner Holes For X 75 For X 34, 42, 50, 66, Plug Shell onfiguration and 104 onfigurations Style No Shells are.040 in. thick. 62 arnes Industrial Road North, Wallingford, onnecticut Phone:(203) Fax:(203) R. 2 Holes Slots..14R 2 Holes Polarizing Pin RP / 19

10 X SERIES ORDERIN INFORMTION Omit steps not required X 9 P M Step 1 Series: X, XN Numerical contact identification on sizes 34, 50, and 104. Step 2 No. of ontacts: 9, 14, 18, 20, 26, 34, 42, 50, 66, 75, and 104 See note 1 below Step 3 Pin or Socket ontacts: P - Pin S - Socket Step 4 (See bottom chart) Step 5 Step 6 Shell e: Polarization 0 No shell Position: 1 Plug shell,,,, D, style 1 * 000. E, F or. Omit letter 2 Receptacle when shell, style polarization 2 * 000. is not 3 Plug shell, required. monojack type, style 3 * Receptacle, monojack type, style 4 * Stainless Steel Plug shell, style 7 * Stainless Steel Receptacle shell, style 8 * 000. Polarizing Position Request availability information Step 7 (See bottom chart) Step 8 Plate: 00- When no mounting plate is required *10- plate, style #0010. Note: See section XMR/E RP/57. * plates are not used with M, or D jackscrews. Step 9 Special askets: Omit letter when gaskets are not required. - ulkhead gasket, style #0000. Use only when mounting plate is specified. F- Face gasket, style #0000F. Use with male insert only. - If both gasket #0000 and gasket #0000F are desired. heck plant for availability on all gaskets. 62 arnes Industrial Road North, Wallingford, onnecticut Phone:(203) Fax:(203) RP / 20 Step 4 Step 7 uides - ylindrical guide with single spring member. Recommended for ground only. K- ylindrical guide with four spring members. May be used for electrical contact. N- ylindrical guide without spring member. Recommended for extra mechanical strength. and Jacksockets * M- Polarized short turnable jackscrew and jacksocket. annot be used with hoods. * - Polarized long turnable jackscrew and jacksocket for use with hoods. * D- Polarized one-piece mono-jackscrew and mono-jacksocket (no separate knob); to be used with hoods on sizes: 34, 42, 50, 66, 75, and 104. *F- Polarized fixed jackscrew and jacksocket usable with or without hood; (no knob required). MW- Same as M but with knurled round knob with internal hex. MU- Same as M but with knurled round knob with screwdriver slot. MX- Same as M but with hex knob. W- Same as but with knurled round knob with internal hex. U- Same as but with knurled round knob with screwdriver slot. X- Same as but with hex knob. Z- Same as but with prybar knob. Request availability information * Material: Nickel Plated rass standard Formed Hoods: 0- No Hood. 3- Hood, top opening, style #0300, for use with e or D jackscrews. 4- Hood, side opening, style #0400, for use with e or D jackscrews. 5- Hood, top opening, style #0500J, for use with F style jackscrews. 6- Hood, side opening, style #0600J, for use with F style jackscrews. Deep Drawn Hoods: 7- Hood, top opening, style #0700, for use with e or D jackscrews. 8- Hood, side opening, style #0800, for use with e or D jackscrews. 9- Hood, top opening, style #0900, for use with F jackscrews. 2- Hood, side opening, style #0200, for use with F jackscrews. Note: ddition of X to code # indicates cable opening larger than std. See hoods for cable opening size. Example: X20P1300 X Note: 1. ontacts are ordered separately. See 100 Series contact section of Rack & Panel

M Series Pin and Socket Connectors. RoHS. Ready

M Series Pin and Socket Connectors. RoHS. Ready M Series RoHS Ready M Series Connectors Product Facts Most connectors intermateable with connectors made to MIL-C-28748 requirements Wide range of connector styles and sizes: standard connectors (unloaded),