Sprecher + Schuh offers a broad selection

Transcription

1 starters II Preassembled or build from stock Easy, fast, economical enclosed starters for applications up to 30HP starters are also available with our advanced EP7 Solid State Overload Relay (select appropriate overload relay code for this option) Sprecher + Schuh offers a broad selection of pre-assembled or build-fromstock starters housed in a high impact, non-metallic, cul Approved, Type 1, 12, 4, or 4x enclosure. Built for convenience, space savings and economy, starters II are efficiently designed to use stock A7 contactors and EP7 or T7N overloads usually stocked by distributors. ontactor and overload are either pre-wired and pre-mounted onto the enclosure s built-in DIN-rail or may be ordered as separate components. Ample knockouts and open terminals guarantee quick, no fuss wiring. Sized for most industrial applications starters II control motors up to 460V in two sizes of enclosures, measuring only 208 x 98mm (7.4 x 3.9 ) or 250 x 125mm (9.85 x 4.93 ) for our larger sizes. This covers over 85% of industrial motor control applications in a very compact package that can be mounted adjacent to or directly on equipment. Top line performance These rugged, modular starters are built with our state-of-the-art A7 Series contactors, noted for their long and reliable service. Bounce free contacts and high contact pressure allow the device to handle high inrush currents with no effect on performance. Thermal overload option starters, sized 9 to 23 amps, are equipped with Sprecher + Schuh s T7N bimetallic thermal overload relay as standard. The consistent high quality of our thermal overload relays is ensured by a complex current calibration procedure performed after each unit is at full operating temperature. alibration is performed at the largest and smallest current the overload can handle. The accurate time/ current characteristic curve obtained in this manner guarantees reliable motor protection every time. Solid state overload options starters II, sizes 9 to 23 amps, can also be supplied with Sprecher + Schuh s EP7 Second Generation solid state overload relay. The EP7 Overload is standard on larger (sizes 30 to 43 amps) and all reversing starters. Unlike traditional overload relays that indirectly sense motor current through heater elements, EP7 solid state overload relays measure motor current directly through integrated current transformers and on board electronics. The electronics provide increased accuracy and numerous other advantages over electromechanical relays. Learn more about Sprecher + Schuh overload relays in Section B of this catalog. No fuss flexibility The enclosure for the starter II is designed for simplicity. The START button mechanically interfaces with a special mounted N.O. contact with minimal wiring. The STOP button also mechanically interfaces with the N.. contact on the overload relay, providing the STOP function. The RESET is provided as standard and functions with no additional wiring. Kwikstarter II s can also be adapted for a 2-wire maintain control circuit. Build it yourself starters may be assembled from stock components. Just grab a A7 contactor and overload of your choice and snap them into the enclosure. Minimal wiring is required and assembly can be completed in minutes. 4

2 starters II Series AK7 & BK7 - A oils starters II with T7N or EP7 Overload Relays; ➊➏ over ontrol/ Single Ø Total Aux. ontacts Installed ode 115V 230V 200V 230V 460V 575V NO N atalog Number ➌ starter with Start & Raised Stop ❹➎ 1/2 1 1/2 ~ ~ ~ ~ BK P2 ~ ~ /2 AK P2 302 Q1 1/2 2 ~ ~ ~ ~ BK P2 ~ ~ /2 10 AK P2 338 Q1 1 3 ~ ~ ~ ~ BK P2 ~ ~ AK P2 363 Q1 2 3 ~ ~ ~ ~ BK P2 ~ ~ 5 7 1/ AK P2 390 Q1 starter with Reset 1/2 1 1/2 ~ ~ ~ ~ BK P0 276 Q1 ~ ~ /2 AK P0 1/2 2 ~ ~ ~ ~ BK P0 313 Q1 ~ ~ /2 10 AK P0 1 3 ~ ~ ~ ~ BK P0 338 Q1 ~ ~ AK P0 2 3 ~ ~ ~ ~ BK P0 ~ ~ 5 7 1/ AK P0 365 Q1 oil odes ➎ A.. Voltage Range ontrol Source oil ode 50 Hz 60 Hz BK7 AK V 120V ommon Separate 208 ~ 208V ~ ommon 220W ~ 208V-240V ommon ommon V 240V ommon ommon V 277V ommon ~ V-400V 440V ~ ommon V 480V ~ ommon V 600V ~ ommon ontrol ircuit Note ommon: oils are assumed to be common with the line voltage and will be connected to the line source (L1-L2) per the table. Separate: oils are assumed to be from a separate source and will not be connected to the line source per the table. This item is available in the ORANGE E PRESS 3-day shipping program See selection guide for details Specify atalog Number Replace (Q) with oil ode See this page See page 8 Important Note: starters II are only designed to accommodate T7N Thermal Overload Relays or EP7 Second Generation Solid State Overload Relays. Select O/L Relay ode from page 8. ➊ starters II are designed for three-wire control circuits. Two-wire (maintain) control can be accomplished by adding pushbutton latch KS7-PLA. ➋ A special design NO auxiliary contact (at.# KS7-PK) is used as the holding circuit interlock, as well as, the START button interface. It is not available for other use. ➌ Refer to page 10.2 for dimensional information. ➍ STOP button also functions as RESET button. Plastic Bezel is standard. ➎ Other voltages available, see Section A. Non-standard coil voltages not listed here must be ordered and installed separately as renewal parts. ➏ Use T7N or EP7-ED/EP7-EE Second Generation overload. 5

3 starters II Series AK7 & BK7 - Electronic 24VD oils starters II with T7N or EP7 Overload Relays; ➊➍➎➏ over ontrol/ Single Ø Total Aux. ontacts Installed ode 115V 230V 200V 230V 460V 575V NO N atalog Number ➌ starter with Start & Raised Stop ❹➎ 1/2 1 1/2 ~ ~ ~ ~ BK7-9E-24E- -P2 379 Q1 ~ ~ /2 AK7-9E-24E- -P2 1/2 2 ~ ~ ~ ~ BK7-12E-24E- -P2 ~ ~ /2 10 AK7-12E-24E- -P2 425 Q1 1 3 ~ ~ ~ ~ BK7-16E-24E- -P2 ~ ~ AK7-16E-24E- -P2 2 3 ~ ~ ~ ~ BK7-23E-24E- -P2 ~ ~ 5 7 1/ AK7-23E-24E- -P2 starter with Reset 1/2 1 1/2 ~ ~ ~ ~ BK7-9E-24E- -P0 ~ ~ /2 AK7-9E-24E- -P0 1/2 2 ~ ~ ~ ~ BK7-12E-24E- -P0 ~ ~ /2 10 AK7-12E-24E- -P0 1 3 ~ ~ ~ ~ BK7-16E-24E- -P0 ~ ~ AK7-16E-24E- -P0 456 Q1 489 Q1 353 Q1 400 Q1 431 Q1 2 3 ~ ~ ~ ~ BK7-23E-24E- -P0 ~ ~ 5 7 1/ AK7-23E-24E- -P0 464 Q1 Specify atalog Number See page 8 Important Note: starters II are only designed to accommodate T7N Thermal Overload Relays or EP7 Second Generation Solid State Overload Relays. Select O/L Relay ode from page 8. ➊ starters II are designed for three-wire control circuits. Two-wire (maintain) control can be accomplished by adding pushbutton latch KS7-PLA. ➋ A special design NO auxiliary contact (at.# KS7-PK) is used as the holding circuit interlock, as well as, the START button interface. It is not available for other use. ➌ Refer to page 10.2 for dimensional information. ➍ STOP button also functions as RESET button. Plastic Bezel is standard. ➎ Only available in 24VD for separate control source. A and D coils are not interchangeable. ➏ Use T7N or EP7-ED/EP7-EE Second Generation overload. 6

4 starters II Series AK7 & BK7 - A and Elec. 24VD oils starters II with T7N or EP7 Overload Relays with H-O-A and Light ➊➋➌➎➏ over ontrol/ Single Ø Total Aux. ontacts Installed ode 115V 230V 200V 230V 460V 575V NO N atalog Number ➍ starter with Reset and H-O-A Selector Switch and Light with A oil 1/2 1 1/2 ~ ~ ~ ~ BK P0+1R7 ~ ~ /2 AK P0+1R7 380 Q1 1/2 2 ~ ~ ~ ~ BK P0+1R7 ~ ~ /2 10 AK P0+1R7 417 Q1 1 3 ~ ~ ~ ~ BK P0+1R7 ~ ~ AK P0+1R7 442 Q1 2 3 ~ ~ ~ ~ BK P0+1R7 ~ ~ 5 7 1/ AK P0+1R7 469 Q1 starter with Reset and H-O-A Selector Switch and Light with Elec. 24VD oil ➐ 1/2 1 1/2 ~ ~ ~ ~ BK7-9E-24E- -P0+1R7 ~ ~ /2 AK7-9E-24E- -P0+1R7 1/2 2 ~ ~ ~ ~ BK7-12E-24E- -P0+1R7 ~ ~ /2 10 AK7-12E-24E- -P0+1R7 1 3 ~ ~ ~ ~ BK7-16E-24E- -P0+1R7 ~ ~ AK7-16E-24E- -P0+1R7 2 3 ~ ~ ~ ~ BK7-23E-24E- -P0+1R7 ~ ~ 5 7 1/ AK7-23E-24E- -P0+1R7 457 Q1 504 Q1 535 Q1 568 Q1 oil odes ➎ A.. Voltage Range ontrol Source oil ode 50 Hz 60 Hz BK7 AK V 120V ommon Separate 208 ~ 208V ~ ommon 220W ~ 208V-240V ommon ommon V 240V ommon ommon D.. Voltage Range ontrol Source oil ode VD BK7 AK7 24E 24V Separate Separate ontrol ircuit Note ommon: oils and pilot devices in the control circuit are assumed to be common with the line voltage and will be connected to the line source (L1-L2) per the table. Separate: oils and pilot devices in the control circuit are assumed to be from a separate source and will not be connected to the line source per the table. Line Voltage not listed: (i.e.: 480 and 575 VA) require a separate control source (i.e.: 120 VA). D7D pilot devices are rated 300 VA maximum. This item is available in the ORANGE E PRESS 3-day shipping program See selection guide for details Specify atalog Number Replace (Q) with oil ode See this page See page 8 Important Note: starters II are only designed to accommodate T7N Thermal Overload Relays or EP7 Second Generation Solid State Overload Relays. Select O/L Relay ode from page 8. ➊ This is a factory assembly. The KS7-0S1 does not include knock-outs for field assembly of this starter. ➋ Uses D7D-P4N_ Red Monolithic Run pilot light with LED bulb. Pilot light voltage to match coil voltage for 24, 120, 240 VA control. Red Run Light can be changed for Green. hange +1R7 to +1G7. For example, AK P0+1R7 becomes AK P0-1G7. ➌ Uses D7D-SM32x20 Monolothic 3-position selector switch for maintain control, HAND-OFF- AUTO function with legend plate. ➍ Refer to page 10 for wiring diagram and 10.2 for dimensional information. This is a clamshell enclosure design with wires to cover controls. ➎ Uses T7N or EP7-ED/EP7-EE Second Generation overload. ➏ One NO auxilliary for customer use. There is no room for additional auxilliaries. ➐ Only available in 24V Electronic D, a separate control source. A and D oils are not interchangeable. Uses D7D-P4N3 Red Monolithic Run pilot light. 6.1

5 NEMA starters II Series AKN7 & BKN7 - A and Elec. 24VD oils NEMA starters II with T7N or EP7 Overload Relays ➊➏ over ontrol/ NEMA Size Single Ø Total Aux. ontacts Installed ode 115V 230V 200V 230V 460V 575V NO N atalog Number ➌ starter with Start & Raised Stop with A oil ❹➎ 1/3 1 ~ ~ ~ ~ BKN P2 ~ ~ 1-1/2 1-1/2 2 2 AKN P2 338 Q1 1 2 ~ ~ ~ ~ BKN P2 ~ ~ AKN P2 363 Q1 starter with Start & Raised Stop with Elec. 24 VD oil ➐ 1/3 1 ~ ~ ~ ~ BKN7-12E-24E- -P2 ~ ~ 1-1/2 1-1/2 2 2 AKN7-12E-24E- -P2 425 Q1 1 2 ~ ~ ~ ~ BKN7-16E-24E- -P2 ~ ~ AKN7-16E-24E- -P2 456 Q1 starter with Reset with A oil 1/3 1 ~ ~ ~ ~ BKN P0 ~ ~ 1-1/2 1-1/2 2 2 AKN P0 313 Q1 1 2 ~ ~ ~ ~ BKN P0 ~ ~ AKN P0 338 Q1 starter with Reset with Elec. 24 VD oil ➐ 1/3 1 ~ ~ ~ ~ BKN7-12E-24E- -P0 ~ ~ 1-1/2 1-1/2 2 2 AKN7-12E-24E- -P0 400 Q1 1 2 ~ ~ ~ ~ BKN7-16E-24E- -P0 ~ ~ AKN7-16E-24E- -P0 431 Q1 oil odes ➎ A.. Voltage Range ontrol Source oil ode 50 Hz 60 Hz BK7 AK V 120V ommon Separate 208 ~ 208V ~ ommon 220W ~ 208V-240V ommon ommon V 240V ommon ommon V 277V ommon ~ V-400V 440V ~ ommon V 480V ~ ommon V 600V ~ ommon ontrol ircuit Note ommon: oils are assumed to be common with the line voltage and will be connected to the line source (L1-L2) per the table. Separate: oils are assumed to be from a separate source and will not be connected to the line source per the table. This item is available in the ORANGE E PRESS 3-day shipping program See selection guide for details Specify atalog Number Replace (Q) with oil ode See this page See page 8 Important Note: starters II are only designed to accommodate T7N Thermal Overload Relays or EP7 Second Generation Solid State Overload Relays. Select O/L Relay ode from page 8. ➊ starters II are designed for three-wire control circuits. Two-wire (maintain) control can be accomplished by adding pushbutton latch KS7-PLA. ➋ A special design NO auxiliary contact (at.# KS7-PK) is used as the holding circuit interlock, as well as, the START button interface. It is not available for other use. ➌ Refer to page 10.2 for dimensional information. ➍ STOP button also functions as RESET button. Plastic Bezel is standard. ➎ Other voltages available, see Section A. Non-standard coil voltages not listed here must be ordered and installed separately as renewal parts. ➏ Use T7N or EP7-ED/EP7-EE Second Generation overload. ➐ Only available in 24V Electronic D for separate control source. A and D oils are not interchangeable. 6.2

6 NEMA starters II Series AKN7 & BKN7 - A & Elec. 24VD oils NEMA starters II with T7N or EP7 Overload Relays with H-O-A and Light ➊➋➌➎➏ over ontrol/ NEMA Size Single Ø Total Aux. ontacts Installed ode 115V 230V 200V 230V 460V 575V NO N atalog Number ➌ NEMA starter with Reset and H-O-A Selector Switch and Light with A oil 00 1/3 1 ~ ~ ~ ~ BKN P0+1R7 1 ➏ 0 ~ ~ 1-1/2 1-1/2 2 2 AKN P0+1R7 417 Q ~ ~ ~ ~ BKN P0+1R7 1 ➏ 0 ~ ~ AKN P0+1R7 442 Q NEMA starter with Reset and H-O-A Selector Switch and Light with Elec 24VD oil ➐ 1/3 1 ~ ~ ~ ~ BKN7-12E-24E- -P0+1R7 1 ➏ Q1 ~ ~ 1-1/2 1-1/2 2 2 AKN7-12E-24E- -P0+1R7 1 2 ~ ~ ~ ~ BKN7-16E-24E- -P0+1R7 1 ➏ Q1 ~ ~ AKN7-16E-24E- -P0+1R7 oil odes ➎ A.. Voltage Range ontrol Source oil ode 50 Hz 60 Hz BK7 AK V 120V ommon Separate 208 ~ 208V ~ ommon 220W ~ 208V-240V ommon ommon V 240V ommon ommon D.. Voltage Range ontrol Source oil ode VD BK7 AK7 24E 24V Separate Separate ontrol ircuit Note ommon: oils and pilot devices in the control circuit are assumed to be common with the line voltage and will be connected to the line source (L1-L2) per the table. Separate: oils and pilot devices in the control circuit are assumed to be from a separate source and will not be connected to the line source per the table. Line Voltage not listed: (i.e.: 480 and 575 VA) require a separate control source (i.e.: 120 VA). D7D pilot devices are rated 300 VA maximum. This item is available in the ORANGE E PRESS 3-day shipping program See selection guide for details Specify atalog Number Replace (Q) with oil ode See this page See page 8 Important Note: starters II are only designed to accommodate T7N Thermal Overload Relays or EP7 Second Generation Solid State Overload Relays. Select O/L Relay ode from page 8. ➊ This is a factory assembly. The KS7-0S1 does not include knock-outs for field assembly of this starter. ➋ Uses D7D-P4N_ Red Monolithic Run pilot light with LED bulb. Pilot light voltage to match coil voltage for 24, 120, 240 VA control. Red Run Light can be changed for Green. hange +1R7 to +1G7. For example, AKN P0+1R7 becomes AKN P0-1G7. ➌ Uses D7D-SM32x20 Monolothic 3-position selector switch for maintain control, HAND-OFF- AUTO function with legend plate. ➍ Refer to page 10 for wiring diagram and 10.2 for dimensional information. This is a clamshell enclosure design with wires to cover controls. ➎ Uses T7N or EP7-ED/EP7-EE Second Generation overload. ➏ One NO auxilliary for customer use. There is no room for additional auxilliaries. ➐ Only available in 24V Electronic D, a separate control source. A and D oils are not interchangeable. Uses D7D-P4N3 Red Monolithic Run pilot light. 6.3

7 starters II Series AK7 & BK7 starter II s with T7N or EP7 Overload Relays ➊➋ For Use With Environmental omponent Description ontactor Overload Approvals atalog Number Flush Green START / Extended Red STOP- Mechanical interface auxiliary contact required. See following page for pricing. KS7-PK included A T7N EP7-ED1 EP7-EE cul Type 1/12/4/4x IE KS7-OS4 70 Blue RESET Only A T7N EP7-ED1 EP7-EE cul Type 1/12/4/4x IE KS7-OS1 45 starter II omponents with T7N or EP7 Overload Relays omponent Description For Use With... atalog Number Start - ontact kit Specially designed NO auxiliary; mechanically interfaces with the START button. Mounts on right side. A KS7-PK is included in every KS7-OS4 enclosure. KS7-OS4 (Renewal Part) KS7-PK 17 Pushbutton Latch - For maintain contact control (2-wire control) KS7-OS4 KS7-PLA 8.50 Neutral Terminal KS7-OS1 KS7-OS4 KS7-PNT 12 Grounding Kit (for use with metal conduit) All Kwikstarter enclosures KS7-GR ➊ starters II are only designed to accommodate A contactors with T7N Thermal Overload Relays or EP7 Second Generation Solid State Overload Relays. Select contactor from Section A and overload relay from Section B in this catalog. ➋ KS7-OS4 and KS7-OS1 may be used with either EP7 Second Generation or T7N (field interchangeable). 7

8 starters II Series AK7 & BK7 starters II with EP7 Solid State Overload Relay 3-Phase Application ➋➌ For use with starter... Amp Range Overload Relay ode ( ) atalog Number (of Overload Relay used) 3-Phase / Manual Reset / lass D1AB EP7-ED1AB D1BB EP7-ED1BB +9 AK7-9...AK D1B EP7-ED1B D1DB EP7-ED1DB D1EB EP7-ED1EB +9 3-Phase / Selectable Function and lass EAB EP7-EEAB EBB EP7-EEBB +17 AK7-9...AK EB EP7-EEB EDB EP7-EEDB EEB EP7-EEEB +17 starters II with EP7 Solid State Overload Relay 1-Phase Application ➋➌ For use with starter... Amp Range Overload Relay ode ( ) atalog Number (of Overload Relay used) 1-Phase / Selectable Function and lass EPB EP7S-EEPB +15 BK7-9...BK ERB EP7S-EERB ESB EP7S-EESB +15 starters II with T7N Bimetallic Overload Relays ➊ For use with Kwikstarter... AK7-9...AK7-23 and BK7-9...BK7-23 Frame A Amp Range Overload Relay ode ( ) atalog Number (of Overload Relay used) AA16 T7N-23-A16 Standard AA25 T7N-23-A25 Standard AA40 T7N-23-A40 Standard AA50 T7N-23-A50 Standard AA63 T7N-23-A63 Standard AA80 T7N-23-A80 Standard AB10 T7N-23-B10 Standard AB13 T7N-23-B13 Standard AB16 T7N-23-B16 Standard AB20 T7N-23-B20 Standard AB25 T7N-23-B25 Standard AB32 T7N-23-B32 Standard AB40 T7N-23-B40 Standard AB48 T7N-23-B48 Standard AB63 T7N-23-B63 Standard AB75 T7N-23-B75 Standard A10 T7N Standard A12 T7N Standard A16 T7N Standard A20 T7N Standard A21 T7N Standard A25 T7N Standard This item is available in the ORANGE E PRESS 3-day shipping program See selection guide for details ➊ If using T7N in single phase application with BK7-9 16, wire per drawing on page 10. ➋ EP7 Overloads are available for use in Starters if the premium features are required (see Section B). ➌ 3-phase EP7-ED or EP7-EE units are only designed for 3 applications. Single phase EP7S units are only designed for 1 applications. If using EP7S, wire per drawing on page 10. 8

9 Now Available starters II Series AK7 & BK7 - A & Elec. 24VD oils starters II with EP7 Overload Relays ➊➐ (KS7-2S4) Single Ø Total Aux. ontacts Installed ode oil odes (Q) ➍➎➏ 115V 230V 200V 230V 460V 575V NO N atalog Number ➌ starters II with A oil 2 5 ~ ~ ~ ~ BK ETD-P ~ ~ 7-1/ AK P 462 Q2 3 5 ~ ~ ~ ~ BK ETD-P ~ ~ AK P 507 Q /2 ~ ~ ~ ~ BK ETD-P ~ ~ AK P 600 Q2 starters II with Electronic 24VD oil ➍ 2 5 ~ ~ ~ ~ BK7-30E-24E-ETD-P ~ ~ 7-1/ AK7-30E-24E- -P 572 Q2 3 5 ~ ~ ~ ~ BK7-37E-24E-ETD-P ~ ~ AK7-37E-24E- -P 633 Q /2 ~ ~ ~ ~ BK7-43E-24E-ETD-P ~ ~ AK7-43E-24E- -P 767 Q2 A.. Voltage Range ontrol Source oil ode 50 Hz 60 Hz BK7 AK V 120V ommon Separate 208 ~ 208V ~ ommon 220W ~ 208V-240V ommon ommon V 240V ommon ommon V 277V ommon ~ V-400V 440V ~ ommon V 480V ~ ommon V 600V ~ ommon Pilot Device Options (includes reset) ➋➏ Specify atalog Number Replace (Q) with oil ode Replace ( ) with Pilot Device Option Replace in catalog number with See this page only Pushbutton Description START-STOP Multi-function 3U Standard I-O Multi-function 4U Standard OFF-ON 2-Position Selector switch 6 Standard HAND-OFF-AUTO 3-Position Selector switch 7 Standard Run Pilot Light Green 1G Standard Run Pilot Light Red 1R Standard Overload Alarm Pilot Light 1Y Standard D7-N8 22mm Hole Plug 0 Standard Optional A7 Modifications (Factory Assembled) Description Add to end of catalog number Electronic Interface -JE +94 Surge Suppressor RD Surge Suppressor Varistor -V +54 Additional N ontact -L Additional NO ontact -L ontrol ircuit Note ommon: oils and pilot devices in the control circuit are assumed to be common with the line voltage and will be connected to the line source (L1-L2) per the table. Separate: oils and pilot devices in the control circuit are assumed to be from a separate source and will not be connected to the line source per the table. Pilot lights are 240 VA maximum. Replace with one of the following Overload Relays For use with starter... Amp Range Overload Relay ode ( ) atalog No. (of Overload Relay used) 3-Phase / Manual Reset / lass D1D EP7-ED1D D1DD EP7-ED1DD +0 AK D1ED EP7-ED1ED D1FD EP7-ED1FD +0 3-Phase / Auto or Manual Reset / lass 10, 15, 20, ED EP7-EED EDD EP7-EEDD +21 AK EED EP7-EEED EFD EP7-EEFD +21 ➊ Use EP7-ED/EP7-EE Second Generation overloads only. Single-phase applications utilize EP7S-EETD only. ➋ Plastic Bezel is standard. Pilot Device options include D7-BX_ Base Mounted contact blocks. See page H68 for more information. ➌ Refer to page 10 for wiring diagram and 10.2 for dimensional information. ➍ Electronic 24VD oils are not interchangeable with other coil sizes or types. ➎ Other voltages available, see Section A. Non-standard coil voltages not listed here must be ordered and installed separately as renewal parts. ➏ One Pilot Device option must be selected. Blanks are not available. If Pilot Light option is selected then Pilot Light must match oil Voltage 24V A or D, 120V or 240V A only. ➐ PT not possible with KS7-2S4 enclosure. 9

10 Now Available starters II / Reversing Series AUK A & Elec. 24VD oils Three Phase Reversing starters II with EP7 Overload Relays ➊➐ (KS7-0S4R) Auxiliary ontacts per ontactor ➑ ode 200V 230V 460V 575V NO N atalog Number ➌ FVR 3-Phase with A oil /2 1 1 AUK P 675 Q / AUK P 745 Q AUK P 790 Q / AUK P 835 Q3 FVR 3-Phase with Electronic 24V D oil /2 1 1 AUK7-9E-24E- -P 829 Q / AUK7-12E-24E- -P 919 Q3 oil odes (Q) ➍➎➏ A.. Voltage Range ontrol Source oil ode 50 Hz 60 Hz BK7 AK V 120V ommon Separate 208 ~ 208V ~ ommon 220W ~ 208V-240V ommon ommon V 240V ommon ommon V 277V ommon ~ V-400V 440V ~ ommon V 480V ~ ommon V 600V ~ ommon Pilot Device Options (includes reset) ➋➏ Specify atalog Number Replace (Q) with oil ode Replace ( ) with Pilot Device Option AUK7-16E-24E- -P 976 Q / AUK7-23E-24E- -P 1033 Q3 Replace in catalog number with See this page ONLY Pushbutton Description FOR-STOP-REV Multi-function 3U Standard UP-STOP-DOWN Multi-function 4U Standard OPEN-STOP-LOSE Multi-function 5U Standard FOR-STOP-REV 3-Position Selector switch 6 Standard UP-OFF-DOWN 3-Position Selector switch 7 Standard OPEN-OFF-LOSE 3-Position Selector switch 8 Standard Overload Alarm Pilot Light 1Y Standard D7-N8 22mm Hole Plug 0 Standard Optional A7 Modifications (Factory Assembled) Description (supplied on each contactor) Add to end of catalog number Electronic Interface -2JE +188 Surge Suppressor RD Surge Suppressor Varistor -2V +108 Additional N ontact -2L Additional NO ontact -2L ontrol ircuit Note ommon: oils and pilot devices in the control circuit are assumed to be common with the line voltage and will be connected to the line source (L1-L2) per the table. Separate: oils and pilot devices in the control circuit are assumed to be from a separate source and will not be connected to the line source per the table. Pilot lights are 240 VA maximum. Replace with one of the following Overload Relays For use with starter... AUK AUK7-9E...23E AUK AUK7-9E...23E Amp Range Overload Relay ode ( ) atalog Number (of Overload Relay used) 3-Phase / Manual Reset / lass D1AB EP7-ED1AB Standard D1BB EP7-ED1BB Standard D1B EP7-ED1B Standard D1DB EP7-ED1DB Standard D1EB EP7-ED1EB Standard 3-Phase / Auto or Manual Reset / lass 10, 15, 20, EAB EP7-EEAB EBB EP7-EEBB EB EP7-EEB EDB EP7-EEDB EEB EP7-EEEB +17 ➊ Use EP7-ED/EP7-EE Second Generation overloads only. ➋ Plastic Bezel is standard. Pilot Device options include D7-BX_ Base Mounted contact blocks. See page H68 for more information. ➌ Refer to page 10.1 for wiring diagram and 10.3 for dimensional information. ➍ Electronic 24VD oils are not interchangeable with other coil sizes or types. ➎ Other voltages available, see Section A. Non-standard coil voltages not listed here must be ordered and installed separately as renewal parts. ➏ One Pilot Device option must be selected. Blanks are not available. If Pilot Light option is selected then Pilot Light must match oil Voltage 24V A or D, 120V or 240V A only. ➐ PT not possible with KS7-0S4R enclosure. ➑ One N.. auxiliary contact is used for electrical interlocking. On AUK7 reversing starters, the N.. contact comes from the Mechanical/Electrical Interlock unit (at# M7-02). 9.1

11 Now Available NEMA starters II Series AKN7 & BKN7 - A & Elec. 24VD oils NEMA starters II with EP7 Overload Relays ➊➐ (KS7-2S4) NEMA Size oil odes (Q) ➍➎➏ Specify atalog Number Replace (Q) with oil ode Replace ( ) with Pilot Device Option Single Ø A.. Voltage Range ontrol Source oil ode 50 Hz 60 Hz BK7 AK V 120V ommon Separate 208 ~ 208V ~ ommon 220W ~ 208V-240V ommon ommon V 240V ommon ommon V 277V ommon ~ V-400V 440V ~ ommon V 480V ~ ommon V 600V ~ ommon Pilot Device Options (includes reset) ➋➏ Total Aux. ontacts Installed ode 115V 230V 200V 230V 460V 575V NO N atalog Number ➌ NEMA starters II with A oil 2 3 ~ ~ ~ ~ BKN ETD-P ~ ~ 7-1/2 7-1/ AKN P 507 Q /2 ~ ~ ~ ~ BKN ETD-P ~ ~ AKN P 600 Q2 NEMA starters II with Electronic 24VD oil ➍ 3 5 ~ ~ ~ ~ BKN7-37E-24E-ETD-P ~ ~ AKN7-37E-24E- -P 633 Q /2 ~ ~ ~ ~ BKN7-43E-24E-ETD-P ~ ~ AKN7-43E-24E- -P 767 Q2 Replace in catalog number with See this page only ontrol ircuit Note ommon: oils and pilot devices in the control circuit are assumed to be common with the line voltage and will be connected to the line source (L1-L2) per the table. Separate: oils and pilot devices in the control circuit are assumed to be from a separate source and will not be connected to the line source per the table. Pilot lights are 240 VA maximum. Pushbutton Description START-STOP Multi-function 3U Standard I-O Multi-function 4U Standard OFF-ON 2-Position Selector switch 6 Standard HAND-OFF-AUTO 3-Position Selector switch 7 Standard Run Pilot Light Green 1G Standard Run Pilot Light Red 1R Standard Overload Alarm Pilot Light 1Y Standard D7-N8 22mm Hole Plug 0 Standard Optional A7 Modifications (Factory Assembled) Description Add to end of catalog number Electronic Interface -JE +94 Surge Suppressor RD Surge Suppressor Varistor -V +54 Additional N ontact -L Additional NO ontact -L Replace with one of the following Overload Relays For use with starter... AK AK Amp Range Overload Relay ode ( ) atalog Number (of Overload Relay used) 3-Phase / Manual Reset / lass D1D EP7-ED1D D1DD EP7-ED1DD D1ED EP7-ED1ED D1FD EP7-ED1FD +0 3-Phase / Auto or Manual Reset / lass 10, 15, 20, ED EP7-EED EDD EP7-EEDD EED EP7-EEED EFD EP7-EEFD +21 ➊ Use EP7-ED/EP7-EE Second Generation overloads only. Single-phase applications utilize EP7S-EETD only. ➋ Plastic Bezel is standard. Pilot Device options include D7-BX_ Base Mounted contact blocks. See page H68 for more information. ➌ Refer to page 10 for wiring diagram and 10.2 for dimensional information. ➍ Electronic 24VD oils are not interchangeable with other coil sizes or types. ➎ Other voltages available, see Section A. Non-standard coil voltages not listed here must be ordered and installed separately as renewal parts. ➏ One Pilot Device option must be selected. Blanks are not available. If Pilot Light option is selected then Pilot Light must match oil Voltage 24V A or D, 120V or 240V A only. ➐ PT not possible with KS7-2S4 enclosure. 9.2

12 Now Available NEMA starters II / Reversing Series AUKN7 - A & Elec. 24VD oils Three Phase Reversing NEMA starters II with EP7 Overload Relays ➊➐ (KS7-0S4R) NEMA Size Auxiliary ontacts per ontactor ➑ ode 200V 230V 460V 575V NO N atalog Number ➌ 3-Phase FVR NEMA starter with A oil /2 1-1/ AUKN P 745 Q AUKN P 790 Q3 3-Phase FVR NEMA starter with Electronic 24V D oil /2 1-1/ AUKN7-12E-24E- -P 919 Q AUKN7-23E-24E- -P 1033 Q3 oil odes (Q) ➍➎➏ A.. Voltage Range ontrol Source oil ode 50 Hz 60 Hz BK7 AK V 120V ommon Separate 208 ~ 208V ~ ommon 220W ~ 208V-240V ommon ommon V 240V ommon ommon V 277V ommon ~ V-400V 440V ~ ommon V 480V ~ ommon V 600V ~ ommon Pilot Device Options (includes reset) ➋➏ Specify atalog Number Replace (Q) with oil ode Replace ( ) with Pilot Device Option Replace in catalog number with See this page ONLY Pushbutton Description FOR-STOP-REV Multi-function 3U Standard UP-STOP-DOWN Multi-function 4U Standard OPEN-STOP-LOSE Multi-function 5U Standard FOR-STOP-REV 3-Position Selector switch 6 Standard UP-OFF-DOWN 3-Position Selector switch 7 Standard OPEN-OFF-LOSE 3-Position Selector switch 8 Standard Overload Alarm Pilot Light 1Y Standard D7-N8 22mm Hole Plug 0 Standard Optional A7 Modifications (Factory Assembled) Description (supplied on each contactor) Add to end of catalog number Electronic Interface -2JE +188 Surge Suppressor RD Surge Suppressor Varistor -2V +108 Additional N ontact -2L Additional NO ontact -2L ontrol ircuit Note ommon: oils and pilot devices in the control circuit are assumed to be common with the line voltage and will be connected to the line source (L1-L2) per the table. Separate: oils and pilot devices in the control circuit are assumed to be from a separate source and will not be connected to the line source per the table. Pilot lights are 240 VA maximum. Replace with one of the following Overload Relays For use with starter... AUKN AUKN7-12E..16E AUKN AUKN7-12E..16E Amp Range Overload Relay ode ( ) atalog Number (of Overload Relay used) 3-Phase / Manual Reset / lass D1AB EP7-ED1AB Standard D1BB EP7-ED1BB Standard D1B EP7-ED1B Standard D1DB EP7-ED1DB Standard D1EB EP7-ED1EB Standard 3-Phase / Auto or Manual Reset / lass 10, 15, 20, EAB EP7-EEAB EBB EP7-EEBB EB EP7-EEB EDB EP7-EEDB EEB EP7-EEEB +17 ➊ Use EP7-ED/EP7-EE Second Generation overloads only. ➋ Plastic Bezel is standard. Pilot Device options include D7-BX_ Base Mounted contact blocks. See page H68 for more information. ➌ Refer to page 10.1 for wiring diagram and 10.3 for dimensional information. ➍ Electronic 24VD oils are not interchangeable with other coil sizes or types. ➎ Other voltages available, see Section A. Non-standard coil voltages not listed here must be ordered and installed separately as renewal parts. ➏ One Pilot Device option must be selected. Blanks are not available. If Pilot Light option is selected then Pilot Light must match oil Voltage 24V A or D, 120V or 240V A only. ➐ PT not possible with KS7-0S4R enclosure. ➑ One N.. auxiliary contact is used for electrical interlocking. On AUKN7 reversing starters, the N.. contact comes from the Mechanical/Electrical Interlock unit (at# M7-02). 9.3

13 Now Available starters II Series AK7/BK /AUK starter II s for use with A7 ontactors and Overload Relays ➌ omponent Description ontactor For Use With Overload Environmental Approvals atalog Number for starter II ➊ AK7/BK AK7/BK7-30E 43E A A7-30E 43E EP7-ED1D ED1FD EP7-EED EEFD EP7S-EETD cul Type 1/12/4/4x IE KS7-2S4 110 for Reversing starter II ➋ AUK AUK7-9E 23E AU AU7-9E...23E EP7-ED1AB ED1EB EP7-EEAB EEEB starter II Pilot Device Kits (for use with KS7-2S4 or KS7-0S4R) ➌➍ Kits Description Multi-Function Pushbutton kit Non-illuminated START-STOP I-O FOR-STOP-REV UP-STOP-DOWN OPEN-STOP-LOSE Selector switch kits Non-illuminated, includes legend plate For Use With... KS7-2S4 Type 1, 12, 4, 4X KS7-0S4R Type 1, 12, 4, 4X cul Type 1/12/4/4x IE ontact Blocks included NO N atalog Number KS7-P3U KS7-P4U KS7-P3U-REV KS7-P4U-REV KS7-P5U-REV KS7-0S4R ON-OFF 2-Position KS7-2S4 1 - KS7-P6 41 HAND-OFF-AUTO 3-Position Type 1, 12, 4, 4X 2 - KS7-P7 54 FOR-OFF-REV 3-Position UP-OFF-DOWN 3-Position OPEN-OFF-LOSE 3-Position Run Pilot Light or Overload Alarm Pilot Light Plastic operator with diffuser lens in Red, Green or Yellow, with integrated LED power module KS7-0S4R Type 1, 12, 4, 4X KS7-2S4 or KS7-0S4R Type 1, 12, 3R, 4, 4X Replace with color choice R = Red G = Green Y = Yellow KS7-P6-REV KS7-P7-REV KS7-P8-REV KS7-P1 24V ➏ KS7-P1 120V KS7-P1 240V Reset Pushbutton, Blue Plastic, flush operator with Blue ap and R text KS7-2S4 KS7-0S4R - - D7P-F611 ➎ See page H4 ➊ starter enclosure KS7-2S4 are designed to fit A contactors with EP7 Overload Relays. T7N Thermal Overloads can not be substituted. ➋ starter enclosure KS7-0S4R are designed to fit AU reversing contactors with EP7 Overload Relays. T7N Thermal Overloads can not be substituted. ➌ KS7-2S4 and KS7-0S4R are supplied with two 22mm holes for Pilot Devices. A Reset is required and one additional pilot device kit from this page must be selected. PT not possible. ➍ Plastic bezel is standard. Pilot Device Kits include D7-BX_ Base Mounted contact blocks. See page H68 for more information. ➎ D7P-R611 and EP7-ERA can not be used with KS7-2S4 or KS7-0S4R. ➏ KS7-P1 24V can be used with 24V A or 24V D. 9.4

14 [10mm] Inch 1 SALE: Wiring Diagrams starters II starter II (in enclosure KS7-0S1/0S4) USTOMER MUST PROVIDE PROPER BRANH IRUIT PROTETION (F1) SEE THE APPLIATION INSTRUTION SHEET - OMPONENT SELETION TABLES FOR MAX. FUSE SIZE & LASS AND APPLIABLE SHORT IRUIT RATING (USE 75º OPPER WIRE ONLY) THIS DRAWING IS FOR THE FOLLOWING ENLOSURES: KS7-0S4 with integrated START-STOP push buttons KS7-0S1 with integrated RESET push button NOTES: 1) MEHANIAL LATH KS7-PLA FOR MAAINTAINED ONTROL (OPTIONAL). 2) START ONTAT KIT KS7-PK (INLUDED) MOUNTS ON THE RIGHT SIDE WITH MOLDED PRE-FORMED JUMPERS. 3) DO NOT WIRE ONTROLS IRUIT TO LINE SIDE OF ONTATOR WHEN OIL VOLTAGE IS 120V OR LESS. (FATORY WIRING STANDARD) 4) OPTIONAL PILOT LIGHTS. starter II (in enclosure KS7-0S1/0S4) with HOA option HAND-OFF-AUTO with Pilot Light A.. Voltage Range ontrol Source oil ode 50 Hz 60 Hz BK7 AK V 120V ommon Separate 208 ~ 208V ~ ommon 220W ~ 208V-240V ommon ommon V 240V ommon ommon D.. Voltage Range ontrol Source oil ode VD BK7 AK7 24E 24V Separate Separate 10

15 Wiring Diagrams starters II starter II (in enclosure KS7-2S4) starter II (in enclosure KS7-0S4R) 10.1

16 [10mm] 1 Inch SALE: [10mm] 1 Inch SALE: s starters II starter II KS7-0S1/0S4 ( ode Q1) s are in millimeters (inches). s not intended for manufacturing purposes Extended STOP [0.99] HAND-OFF-AUTO with Pilot Light 19.5 [0.77] 44.5 [1.75] [8.19] 188 [7.41] [0.94] [1.24] 60.3 [2.38] 68 [2.68] 36.5 [1.44] 188 mm Ø " 0.2" DIA 188 [7.41] 36.5 [1.44] 205 [8.08] ø5.3 [ ø0.21] 97.9 [3.86] 111 [4.37] 5.5 [0.22] 111 [4.37] 27.9 [1.10] 111 [4.37] ø20.3 [ ø0.80] ø25.3 [ø 1.00] 51 [2.01] [0.22] [0.94] starter II KS7-2S4 ( ode Q2) 125 [4.93] 125 [4.93] 16 [0.63] 250 [9.85] 3.5 [0.14] Ø23 [Ø0.91] 169 [6.66] 13 [0.51] [4.48] 235 [9.26] 78 [3.07] 30 [1.18] 50 [1.97] 110 [4.33] 125 [4.93] 50 [1.97] 24 [0.95] 28.1 [1.11] Rotary operator alternatively (for maintained control) 50 [1.97] 10 Pozidriv No. 2 (1.2 x 6.5) 2.0 Nm 18 lb-in 2 x mm² 2 x No AWG Pozidriv No Nm 20 lb-in 10.2

17 s starters II starter II KS7-0S4R ( ode Q3) s are in millimeters (inches). s not intended for manufacturing purposes. 125 [4.93] 125 [4.93] 16 [0.63] 250 [9.85] 13 [0.51] 3.5 [0.14] Ø23 [Ø0.91] 28.1 [1.11] 10 Pozidriv No. 2 (1.2 x 6.5) 2.0 Nm 18 lb-in 2 x mm² 2 x No AWG Pozidriv No Nm 20 lb-in 235 [9.26] 100 [3.94] [4.39] 30 [1.18] 88.6 [3.49] 125 [4.93] 50 [1.97] 24 [0.95] 50 [1.97] 50 [1.97] 110 [4.33] Rotary operator alternatively (for maintained control) 10.3