System Inventory Portal What s New Last updated on Dec 10, 2018

Transcription

1 Lifecycle Solutions & Services System Inventory Portal What s New Last updated on Dec 10, 2018 The System Inventory Portal is constantly evolving and changing to better support our customers through enhancements, both from our customers and through internal Honeywell marketing and development teams. Honeywell welcomes suggestions to improve the portal and better suit our customer needs. To submit a request 1. Select Submit a Request (your name and will populate automatically) 2. Select Data Verification 3. Select an MSID 4. Type in your suggestion in the Notes text field 5. Select Submit Honeywell

2 Release Update Dec 10, to Contract Manager when CR Header set to Ready for Customer Review When the Contract Renewal Header is set to Ready for Customer Review, when sending the to the Customer Contract Approver, the portal will also send an to the identified Contract Manager as CC 2. Asset support status terminology updated for 2018 Support status terminology for software has been updated to use Current, Supported, and Phased-out. Honeywell

3 Release Update November 09, MSID drop-down list in the Software License area now appear in ascending order. Selecting the Licensed Software button will display a list of license documents with a text box to allow a search by MSID. The MSID s in this list are now sorted in ascending order. 4. Resolved an issue when audit files uploaded to the System Inventory Portal sometimes contained duplicate entries. Honeywell

4 Release Update October 26, 2018 New product support definitions have been updated for all assets in the portal. In the past the hardware and software product support definitions have been Primary, Secondary, Legacy, and Phased-out. In 2018, these product support definitions were changed to combine Primary and Secondary lifecycle phases into a single phase called Full Support. Terminology Changes Example More information can be found at honeywellprocess.com (login required). Honeywell

5 Release Update October 12, ELCN assets are now displayed in the portal. Honeywell

6 2. Missing C200 and C300 Controller I/O data has been added to certain fields, and MAC ID address column has been removed. C300 - Series C I/O Type and Revision is now populated (see image 1) C200 - Series A I/O Type, DL CNI Slot, Boot now display correct data (see image 2) C200 - MAC ID column has been removed as the System Inventory Tool no longer collects this information. (see image 2) Honeywell

7 Release Update October 9, Two new fields MODN and FILEN were added to EHPM in the Portal. Honeywell s Enhanced High Performance Process Manager (EHPM) is a process-connected device on the Enhanced Universal Control Network (EUCN) that provides regulatory control and sequence operations. It enables unification of control functions and data exchange between devices on the Fault Tolerant Ethernet (FTE)-based EUCN to help users improve operations and control performance. 2. Remote I/O data is now displayed under Controllers Honeywell

8 3. Audit or LVRLOG file that contains an ENB will now appear in the portal. 4. Topology view has been updated to correctly show the number of C300 controllers. 5. Parent assets with status of Obsolete will no longer appear in the Contract Renewals. 6. The Product Status field has been removed from switch inventory data fields as this did not apply to switches. 7. The LCNP address in the Honeywell Applications screen is now displayed. This will allow a user to match up the ESVT or EST or ACET or EAPP with the corresponding device found in the LCN node section. Displaying the LCNP address in either Hardware or Software will help tie the two items together being that often the computer name will not refer to the LCN address. Honeywell

9 8. The Microsoft Updates & Hot Fixes button has been removed. It was determined that this data was not needed, and by removing it the time required to collect asset data has been reduced. 9. Pairing of Redundant assets is now consistent with the pairing of the C300 controllers. NIMAs, Experion Servers, ENBs, Logic Manager, etc. are now paired in the same way C300 controllers are paired. 10. EAPP's are now identified as "Experion APP" 11. HW and SW Buttons have been added to the LCN Node list view on the EST-XX type nodes Honeywell

10 12. IO Link names now appear in the Series C I/O section. 13. SMM modules from LVRLOG are now displayed in Controller section. 14. The Inventory QTY and the Shipped QTY Fields have been removed the from customer contract renewal form; replaced with Prior Year QTY and Renewal QTY. Items with no values under Renewal QTY no longer appear in the list on the portal. Honeywell

11 15. System Name and System Number have been added to the customer contract renewal form. 16. The MAC ID column no longer appears under I/O views. 17. EHPM now displays the HW & IO buttons Honeywell