Tube Size Range: 1/2 thru 4

Transcription

1 PLT Series Presslok Tube Fittings/Valves PLT Series (General Service) PLHT Series (O Cleaned, HP bagged) Tube Size Range: / thru PRESSLOK GO/NO-GO GAUGES If Presslok Go/No-Go Gauge slips over pressed section of fitting, press is acceptable. If gauge does not slip over pressed section, press is unacceptable.

2 The PLT Series Presslok System The fast, easy, compact, low cost, Weld Free tubing system System Guaranteed 5-year Warranty Features Compact lightweight hand-held Lithium battery operated pressing tool Mini-Press tool (sizes / - ) for tight hard to access installations Rigid, permanent, uniform engagement of fitting into tube Sizes from / through (5-00mm) tube -yr system warranty for installations using tube supplied from rd party, 5-yr warranty if Dockweiler tube is used for installation, tube meets ASTM A69 / EN 07-7 / EN 06-5 standards Pressure rating: / to -/ 00 psi (0 Bar), to 00 psi ( Bar) Fittings meet ASME B. & B. support requirements and are guaranteed to a helium leak rate of X 0-7 scc/sec PLHT Series Fittings/tube are supplied CFOS cleaned and high purity bagged O-rings come standard Pre-lubed with high purity Oxygen compatible lubrication EPDM, Viton, Perfluoroelastomer, O-rings are optional PLT Series Presslok, is an innovative tube size press system offering economy, speed, and reliability for joining 0/6L tube for high purity & general purpose inert gas applications, process cooling water, vacuum exhaust and other low pressure general service installations. /Dockweiler provides 0/6L Ra (PLHT) O cleaned stainless steel tube used for high purity solar/semiconductor gas systems and general purity tube. The PLT Series Presslok system eliminates welding when joining / - (5-00 mm) components through newly developed tube sized Presslok couplings, elbows, tees, reducers, adapters and valves. offers the industries smallest/lightest, portable, hand-held Li-ion rechargeable battery tools on the market. These tools are used to connect fittings to tube with a permanent mechanical attachment in seconds. These tools are ideally suited for the demanding needs of the Semiconductor Industry where space is at a premium. The system has met industry standard pressure, helium and particle tests. The PLT Series Presslok System is ideally suited for CFOS grade UN, CDA, Argon and other inert gas, PCW, vacuum exhaust, drains, etc. PLT Series Presslok products come standard pre-lubricated with Grade E (EPDM), Grade V (Viton) and Grade K Perfluoroelastomer O-rings. Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

3 Man-hours labor The preferred method compared to welding/compression stainless tube The PLT Series Presslok System Compared to Welding Over 00% labor savings Eliminate need for Argon gas Less QA, no coupons No Hot Work Permits needed Over 00% installed cost savings Scarce skilled labor can be redirected to other parts of project Field dry fit prior to crimping Compared to PVC Unprecedented speed and ease of assembly Reduce downtime during tool retrofits and/or modifications More Robust Meets ASTM E8 surface burning characteristics for materials used in plenums Over 00% lower job site labor exposure Fast Portable tools press a tube joint in less than 5 seconds Compact / lightweight pressing tools speed up installation vs. competitive products available on the market Optional 700M Mini-tool available for demanding semiconductor installations where space is at a premium Estimating Assumptions: The estimating method is based on 00 linear feet of tube and including a number of different type and quantity of fittings (e.g. 90 degree elbows, tees, connectors) defined as moderate density that is representative of a typical construction project. Moderate Density Installation: (e.g. basis = 00 ft tube, 0 90 s, 5 tee s, connectors. basis = 00 ft tube, 7 90 s, tee s, connectors) Average man hours per foot (Normal Density fittings) 0.5" 0.75" ".5" " Tube size 0/6L SS PLT Series Presslok - bent 90's PVC sch 0SS O.D. tube (Compression), bent 90's 0 SS O.D. tube (Orbital Welded), bent 90's Cost per linear foot and man-hour labor is calculated using standard RS Means rates, with a productivity rate of.0 at $55.00/hr. analysis represents material costs typically seen on large construction projects. Estimates only represent the material, labor and purge gas costs to fabricate the piping system. This price comparison is based on general information furnished by third parties to, and is offered as an approximation of marketplace conditions. Independent contractor procurement practices can influence the range of this comparison, so it s use is intended for informational purposes only. Estimated installed costs provided by Ralph Cohen Consultancy * Presslok installations save over 00% labor premium per linear foot when compared to PVC Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

4 The PLT Series Presslok Concept NEW HIGH PERFORMANCE SEAL O-ring UN- PRESSE O-ring Pock- Tube Stop O- Pressed O-ring Pocket Hous- Inser- Bea Exaggerated for clarity Presslok Tool Indent O-ring - The precisely molded synthetic rubber o-ring compresses against the tube O.D. and inner housing for a lifelong, leak-tight seal. Grade E (EPDM) is rated for -0ºF to +0ºF (-ºC to +0ºC), Grade V (Viton) is rated for +0F to +00F (-7C to 9C), Grade K Perfluoroelastomer is rated for -0F to 5F (-0C to 0C) NOTE: PLT products must be used only on services compatible with O-ring and fitting materials. Lubricant - PLT Series fittings are supplied with pre-lubricated O-rings. The PLT Series is lubricated with high purity Teflon based lube. This proprietary lubricant contains no hydrocarbons, is oxygen compatible, and has a vapor pressure rating of 0-7 torr. lubricant is ideally suited for the demanding applications commonly found in the Semiconductor, Solar, TFT/LCD, and Bio-Pharmaceutical Industries where purity, low out-gassing and long-term O-ring reliability is critical. Housing - Precision formed of 0L/6L stainless steel, the housing incorporates the O-ring and a tube stop. The unique design provides permanent engagement onto the tube when pressed with the PLT tool. Using compact press tools, available adapters and space saver fittings the fitting system allows for easy field makeup of fitting combinations for reduction of mechanical components and space. Tubing - Dockweiler TCC 0L or 6L Ra CFOS grade or general purpose tube guarantee uniform, high quality press connections when assembling the system. Presslok installations are guaranteed for 5-years when using recommended tube. Insertion Mark - Enables visual verification of full tube insertion to ensure proper installation. NOTE: MARK THE TUBE! Tube end must be inserted into full contact with the tube stop to ensure full joint integrity. Always refer to the latest published Tool Operation and Assembly Manual, available from at no charge. O-ring Pocket - Sized to contain the O-ring before assembly, the pocket is deformed around the O-ring during the pressing operation to fully surround and compress it for complete leak-free sealing. Presslok Tool Indent - The PLT tool jaws engage the entire circumference of the bead on the fitting housing and uniformly compress it to indent the tube and provide a secure attachment of tube to fitting. Tube must be fully inserted into fitting to achieve proper assembly. The mechanical retention of the joint is through the press tool indent. The O-ring seal is separate and is a completely encapsulated static seal. The two function independently of one another. Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

5 Performance PLT Presslok Series Specifications Fitting Specifications Housing Body: Precision cold formed austenitic 0L/6L stainless steel. O-ring Seals: O-ring seals shall be molded of synthetic rubber. Grade E EPDM EPDM (No Color Stripe). Temperature range -0ºF to +0ºF Grade V Viton Viton (Blue Stripe) Temperature range +0F to +00F Grade K Perfluoroelastomer Kalrez (Green Stripe) Temperature range 0F to +5F Pressure Rating: / to -/ 00 psig (0 Bar), to 00 psig ( Bar) Guaranteed Leak Rate: X 0-7 scc/sec He. Leak Testing: 00% of welded fittings helium leak tested. PLHT Cleaning & Packaging: Fittings and tube are cleaned for O Service and individually bagged. High Purity Lubricant Lube proprietary lubricant is manufactured from polytetrafluoroethylene, more commonly known as Teflon. lubricant is inert, has no hydrocarbons and is oxygen compatible. This lubricant is rated for temperatures of 00 F to 50 F. Evaporation ASTM D-595, under 0 00 F is.50%. Vapor Pressure, 68 F 0-7 Torr. Vacuum Thermal Stability, NASA SP-R- 00A 6X0-6, weight loss 0.07%, water vapor recovery 0.0%. Oxidation Stability ASTM D-9, hrs, 0 psi drop. Tube Size In./mm /,7 / 9,05 5, -/ 8, *Tube - Actual Outside Dia. In./mm 0.500, , ,.50 8, Inside Diameter 0.0 0, ,7.870,.70, , Wall Thickness 0.09, 0.065, , , , , , Aprx. Tube* Weight Per Ft. Lbs./kg 0.5 0, 0.6 0, 0.8 0,. 0,5. 0,6.8 0,8.,0.7, Approved Tube (5-yr warranty) 5-year extended warranty against any damages resulting from material defect when using Dockweiler TCC Type 0/6L stainless steel tube during installation. Use of another manufacturers tube will reduce warranty period to -year. Dockweiler TCC type 0/6L stainless tubing is manufactured according to strict tolerances specific to making a consistent crimp of the fitting. Tube should be square cut ( ±0.00 ) and deburred, if required, to prevent damage to the O-ring during assembly. Dockweiler 0/6L Stainless Tube Specifications Material: Technical terms of delivery: Surface finish: Inner surface treatment: Test procedures: Marking: Documentation: Packing: bagged in Seamless or welded stainless 0/6L steel tube, depending on outer diameter According to ASTM A69 / EN 07-7 / EN 06-5, 9.6ft - 0ft (5900mm mm) (max. 0% short length possible) TCC/PLHT Series: I.D. Ra max (0. um), O.D. not defined, PLT Series: Non-defined TCC CFOS Cleaning and test procedures ASTM A6.S Verification of basic test certificates, verification of dimensions, visual inspection, inspection of welded bright finished tubes Heat number, manufacturer, material, dimension Inspection certificate. according to DIN EN00 for the pre-material TCC/PLHT Series: Bright finished tubes packaged with PE caps, with PE/PA squares, Polythene PE. PLT Series: General purpose, packaged with PE end caps Dockweiler AG An der Autobahn 0/0 - D-906 Neustadt-Glewe - Germany - Phone +9 (0) Fax +9 (0) Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

6 The PLT Series Presslok The Presslok System Dimensional / Ordering Information Style 597 Standard Coupling PLT M-E PLT--597-M-E PLT M-E PLT--597-M-E PLT--597-M-E PLT M-E PLT M-E PLT M-E Style 59 Tee PLT M-E PLT--59-M-E PLT-6-59-M-E PLT--59-M-E PLT--59-M-E PLT-0-59-M-E PLT-8-59-M-E PLT-6-59-M-E /,7 / 9,05 5, -/ 8, -/ 6,5 76, 0,6 /,7 / 9,05 5, -/ 8, -/ 6,5 76, 0,6 Dimensions - Takeout L U oz./grams Dimensions - L L U Insert: (EPDM O-ring standard E) V in place of E in part number for Viton O-ring option K in place of E in part number for Perfluoroelastomer O-ring option PLHT in place of PLT for CFOS/-O cleaning & packaging Dimensions are +/-0. Style 5 Cross PLT-08-5-M-E PLT--5-M-E PLT-6-5-M-E PLT--5-M-E PLT--5-M-E PLT-0-5-M-E PLT-8-5-M-E PLT-6-5-M-E /,7 / 9,05 5, -/ 8, -/ 6,5 76, 0,6 Style 560 Concentric Reducer PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E L I L Dimension - I Dimension - / x / ,05 x, x / , x, X / , X 9, / x / , x, / x / , X 9, / x , X 5, x / x, x / x 9, x x 5, x -/ x 8, / x /.7 6,5 x 9, / x CF.7 6,5 x 5, / x -/ ,5 x / x ,5 x x , x 5, x -/ , X 8, x , X x CF.8 0,6 x 5, 7. x -/ ,6 X 8, x.9.8 0,6 X x 0,6 X 76, 5 Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

7 Style 59 Tee Reducing Branch The PLT Series Presslok System PLT M-E PLT M-E PLT M-E PLT M-E PLT---59-M-E PLT M-E PLT M-E PLT---59-M-E PLT M-E PLT---59-M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E Dimensions - Insert: (EPDM O-ring standard E) V in place of E in part number for Viton O-ring option K in place of E in part number for Perfluoroelastomer O-ring option PLHT in place of PLT for CFOS/-O cleaning & packaging Dimensions are +/-0. L L U / x / ,05 x, x / , x, X / , X 9, / x / , x, / x / , X 9, / x , X 5, x / x, x / x 9, x x 5, x -/ x 8, / x / ,5 x 9, / x ,5 x 5, / x - / ,5 x / x ,5 x x / , x 9, x , x 5, x -/ , X 8, x , X X / ,6 X 9, x ,6 x 5, Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax x -/ ,6 X , x ,6 X x 7.9 0,6 X , Style 565SS Flange Adapter ANSI 50 # Raised Face X Tube PLT SS-M-E PLT--565SS-M-E PLT-6-565SS-M-E PLT--565SS-M-E PLT--565SS-M-E PLT-0-565SS-M-E PLT-8-565SS-M-E PLT-6-565SS-M-E Style 565 Flange Adapter ANSI 50 # Raised Face X Presslok PLT M-E PLT--565-M-E PLT M-E PLT--565-M-E PLT--565-M-E PLT M-E PLT M-E PLT M-E Style 550 Tee (T x P) Reducing Branch PLT M-E PLT M-E PLT M-E PLT M-E PLT-*96G--550-M-E PLT-*96G--550-M-E PLT-*96G M-E PLT-*96G M-E /,7 / 9,05 5, -/ 8, -/ 6,5 76, 0,6 Nominal Diameter /,7 / 9,05 5, -/ 8, -/ 6,5 76, 0,6 6 x -/ 5, x 8, 6 X 5, X 6 X 5, X 76, 6 X 5, X 0,6 6 x -/ 5, x 8, 6 X 5, X 6 X 5, X 76, 6 X 5, X 0,6 * 96G Designator is 0L SCH0 Pipe Main L Dimension L Dimension Dimensions - L I Dimension Lbs./kg L Lbs./kg Lbs./kg

8 The PLT Series Presslok Style 59 5º Elbow PLT M-E PLT--59-M-E PLT-6-59-M-E PLT--59-M-E PLT--59-M-E Inches/ mm /,7 / 9,05 5, -/ 8, Dimensions - L Takeout U Style 596 Male NPT Adapter PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E Dimensions - L I Lbs./kg / x / ,7 x 5 59,7.59 0, / x / ,05 x 0 6,7.86 0, x , x 5 66,0 5. 0, -/ x -/ , x 0 69, , x.97.5 x 50 75, 6,7 0,5 PLT-0-59-M-E PLT-8-59-M-E PLT-6-59-M-E -/ 6,5 76, 0, Style 555 CAP Style º Elbow PLT M-E PLT--586-M-E PLT M-E PLT--586-M-E PLT--586-M-E PLT M-E PLT M-E PLT M-E /,7 / 9,05 5, -/ 8, -/ 6,5 76, 0,6 Dimensions - L Insert: (EPDM O-ring standard E) V in place of E in part number for Viton O-ring option K in place of E in part number for Perfluoroelastomer O-ring option PLHT in place of PLT for CFOS/-O cleaning & packaging Dimensions are +/-0. Take Out U PLT M-E PLT--555-M-E PLT M-E PLT--555-M-E PLT--555-M-E PLT M-E PLT M-E PLT M-E Style 599 Female Threaded NPT Adapter PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E I Dimensions - Inches / mm /.85,7 0. /.9 9, , 5.0 -/. 8, /.7 6, , , L Dimensions - Inches / mm L I Lbs./kg / x / ,7 x / x / ,05 x x , x / x -/ , x x.5.5 x Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

9 Style 578 Presslok X Hose Barb Reducing Tee The PLT Series Presslok PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E Dimensions - Inches/ mm L L / X / X / X / X / X / X / x / x / x / x / x / x / x/ x x / x x / x x / x x / x / x / x / x / x / x / x / x / x / x x / x / x x / x x / x x / x x / x x x x / x x x / x 6.5 x 5. / x / 6.5 x 8. / x 6.5 x 50.8 x / 76. x 8. x 76. x 50.8 x 0.6 x 5. x / 0.6 x 8. x 0.6 x Style 5 Presslok Adapter Fitting X PVC Union Style 576 Presslok X Connector X Hose Barb PLT M-E PLT--576-M-E PLT M-E PLT--576-M-E PLT--576-M-E PLT M-E PLT M-E PLT M-E Dimensions - I L /.78.59, /.88. 9, , /..7 8, / 6,5 76, 0, Insert: (EPDM O-ring standard E) V in place of E in part number for Viton O-ring option K in place of E in part number for Perfluoroelastomer O-ring option PLHT in place of PLT for CFOS/-O cleaning & packaging Dimensions are +/-0. Insert: PLT-08-5-M-E PLT--5-M-E PLT-6-5-M-E PLT--5-M-E PLT--5-M-E Dimensions - U L Lbs./kg / , / , , // , Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

10 The PLT Series Space Saver System The Space Saver / Adapter Fittings Dimensional / Ordering Information Space Saver Fittings save space when connecting fitting to fitting Reduced number of crimps Eliminates cutting and prepping short lengths of pipe *Style 586SS 90º Elbow PLT SS-M-E PLT--586SS-M-E PLT-6-586SS-M-E PLT--586SS-M-E PLT--586SS-M-E PLT-0-586SS-M-E PLT-8-586SS-M-E PLT-6-586SS-M-E Dimensions - Takeout L U L /.6.7.5, / , , / , / ,5 size , ,6 7 5 CF Style 567 Reducing Flange Adapter ANSI 50 # X Tube *Style 59SS 5º Elbow PLT-08-59SS-M-E PLT--59SS-M-E PLT-6-59SS-M-E PLT--59SS-M-E PLT--59SS-M-E PLT-0-59SS-M-E PLT-8-59SS-M-E PLT-6-59SS-M-E Dimensions - L Takeout U L Lbs./kg / , / , , / , / 6.5 6,5 6.8 CF CF , , Insert: (EPDM O-ring standard E) V in place of E in part number for Viton O-ring option K in place of E in part number for Perfluoroelastomer O-ring option PLHT in place of PLT for CFOS/-O cleaning & packaging Dimensions are +/-0. PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E Nominal Diameter L Dimension - Lbs./kg -/ x /.5 8, x, / x /.5. 8, X 9, / x.6 8, X 5, x /.5 5 x, x / x 9, x 5.95 X 5, x -/ x 8, Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

11 The PLT Series Space Saver Fittings Style 58 Reducer Adapter PLT M-E PLT M-E PLT M-E PLT M-E PLT---58-M-E PLT M-E PLT M-E PLT---58-M-E PLT M-E PLT---58-M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E Insert: (EPDM O-ring standard E) V in place of E in part number for Viton O-ring option K in place of E in part number for Perfluoroelastomer O-ring option PLHT in place of PLT for CFOS/-O cleaning & packaging Dimensions are +/-0. Dimensions - L I Weight Each (T x P) / x / ,05 x, x / , x, X / , X 9, / x / , x, / x / , X 9, / x , X 5, x / x, x / x 9, x 7.5. x 5, x -/ x 8, x.5 76, x 5, x -/ , X 8, x , X x / CF.7 76, X 6, x 0,6 x 5, x -/ ,6 X 8, x.9.5 0,6 X x 0,6 X 6,5 Style 596SS Male NPT Adapter PLT SS-M-E PLT--596SS-M-E PLT-6-596SS-M-E PLT--596SS-M-E PLT--596SS-M-E Style 599SS Female Threaded NPT Adapter PLT SS-M-E PLT--599SS-M-E PLT-6-599SS-M-E PLT--599SS-M-E PLT--599SS-M-E Dimensions - Dimensions - Weight Each L Lbs./kg / x /.75 0.,7 x / x / ,05 x x , x / x -/ , x x.75 x Weight Each L Lbs./kg / x /. 0.,7 x / x / ,05 x x , x / x -/ , x x.5 x Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

12 The PLT Series Manifold Fittings Style 57 Presslok Tee X Hose Barb X Space Saver Style 57 Presslok Reducing Tee X Hose Barb X Space Saver PLT M-E PLT--57-M-E PLT-6-57-M-E PLT--57-M-E PLT--57-M-E /,7 / 9,05 5, -/ 8, Dimensions - L L Insert: (EPDM O-ring standard E) V in place of E in part number for Viton O-ring option K in place of E in part number for Perfluoroelastomer O-ring option PLHT in place of PLT for CFOS/-O cleaning & packaging Dimensions are +/ PLT M-E PLT M-E PLT M-E PLT M-E PLT---57-M-E PLT M-E PLT M-E PLT---57-M-E PLT M-E PLT---57-M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E PLT M-E / x / 9,05 x,7 x / 5, x,7 X / 5, X 9,05 -/ x / 8, x,7 -/ x / 8, X 9,05 -/ x 8, X 5, x / x,7 x / x 9,05 x x 5, x -/ x 8, x 76, x 5, x -/ 76, X 8, x 76, X x 0,6 x 5, x -/ 0,6 X 8, x 0,6 X Dimensions - L L OZ./kg Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

13 The PLT Presslok Vacuum KF Adapter Fittings The Vacuum KF Adapter Fittings Dimensional / Ordering Information Style 7 Presslok x KF Coupling PLT-08-7-M-E PLT--7-M-E PLT-6-7-M-E PLT--7-M-E PLT--7-M-E PLT-0-7-M-E PLT-8-7-M-E PLT-6-7-M-E Dimensions - /,7 / 9,05 5, -/ 8, -/ 6,5 76, 0,6 L Style 77 Presslok x KF 90 Elbow PLT M-E PLT--77-M-E PLT-6-77-M-E PLT--77-M-E PLT--77-M-E PLT-0-77-M-E PLT-8-77-M-E PLT-6-77-M-E Dimensions - Takeout L U L / , / , , / , / 6,5 76, 0, Lbs./kg Style 76SS KF Vacuum Adapter Style 70 Presslok x KF 5 Elbow PLT-08-76SS-M-E PLT--76SS-M-E PLT-6-76SS-M-E PLT--76SS-M-E PLT--76SS-M-E / x /,7 x 5 / x / 9,05 x 0 x 5, x 5 -/ x -/ 8, x 0 x x 50 L Dimension Insert: (EPDM O-ring standard E) V in place of E in part number for Viton O-ring option K in place of E in part number for Perfluoroelastomer O-ring option PLHT in place of PLT for CFOS/-O cleaning & packaging Dimensions are +/-0. Lbs./kg 0. 0, 0. 0, 0. 0, 0.8 0,. 0.5 PLT-08-70SS-M-E PLT--70SS-M-E PLT-6-70SS-M-E PLT--70SS-M-E PLT--70SS-M-E PLT-0-70SS-M-E PLT-8-70SS-M-E PLT-6-70SS-M-E Dimensions - L TAKEOUT U L / , / , , / , / 6,5 76, 0,6 Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

14 PLT Series Presslok Tools 700M Series Mini-Press Tool (Industries Smallest/Lightest Pressing Tool) Kit Description - The Presslok batteryoperated tool kit, E700M Series. The tool kit includes the actual pressing tool, three () jaws / thru, one () rapid charger, two rechargeable batteries & carrying case. Additional jaws, chargers and batteries may be purchased separately. Presslok 700M Battery Operated Tool.5 (cm) Product Offering Capacity: ½, ¾, tube sizes Forged high strength hardened steel pressing jaws Battery Charger : 0v or 0v options. 700M Series Mini-Presslok Battery/Charger Battery Operated Tool Kit, / - Specifications Li-ion.V,.65 PART NUMBER E7M-0-PLT Ah,0v, Hz, 65W Features Powerful light weight, compact pressing tool Swivel pressing jaw head design Optimum weight distribution for single-hand operation Electronic charging status check, charging status LED Automatic retraction after pressing of joint Powerful Li-ion battery design 0% faster & 0% lighter than Ni-cd v Approximately 50% more pressings vs. Ni-cd v Approximately 50 pressings for / size using Li-ion No memory effect, maximum battery performance PART NUMBER Additional Accessories RAPID BATTERY CHARGER LI-ION BATTERIES.5 - Ring Jaw / Tong Product Offering Capacity: ½, ¾,, -½,,.5,, tube sizes Forged high strength hardened steel pressing jaws Battery Charger : 0v or 0v options (700-Series tools). Series tool only available in plug-in style 0v or 0v. Features Powerful light weight, compact pressing tool Swivel pressing jaw head design Ergonomically shaped housing with recessed grip Electronic charging status check, charging status LED Automatic retraction after pressing of joint Powerful Li-ion battery design 0% faster & 0% lighter than Ni-cd v Approximately 50% more pressings vs. Ni-cd v Approximately 50 pressings for / size using Li-ion No memory effect, maximum battery performance 700M Series Tool Kit Sizes / thru Components Inc. Li-ion.V, 0v, Hz, 65W Aprx. Lbs./kg E7MC-0v E7MC-0v.0 E7MB , Kit Description - The Presslok battery-operated tool kit, E70 Series. The tool kit includes the actual pressing tool, 5 each (5) jaws / thru, one () rapid charger, two rechargeable batteries & one () carrying case. Additional jaws, chargers and batteries may be purchased separately. Note: Series Press Tool &.5 thru ring style jaws/tong sold separately. This tool is not available with battery option, only plug-in 0v or 0v style. 70 Series Press Tool Presslok 70 Battery Operated Tool E7M-0-PLT 70 Series Tool Kit Sizes / thru 7606 SW Bridgeport Road Portland, Oregon 97 USA Phone Fax Series Presslok Battery Battery/Charger Operated Tool Kit, / - Specifications Li-ion.V,.65 PART NUMBER E7-0-PLT Ah,0v, Hz, 65W PART NUMBER E7-0-PLT Li-ion.V, 0v, Hz, 65W -/ - Series Presslok Electric Press Tool Specifications PART NUMBER E8-0-PLT 0v PART NUMBER E8-0-PLT 0v.5 - Ring Jaw / Tong E7-JK-0 E7-JK-8 E7-JK-6 Size.5 jaw/tong kit assembly jaw/tong kit assembly jaw/tong kit Series Pressing Tool Sizes.5 thru

15 Stainless Steel Ball Valve with PL Series Tube Extensions The PL Series Ball Valve Assemblies Stainless Steel Ball Valve with PL Series Tube Extension x Presslok Connection PL-08-08STRM PL--STRM PL-6-6STRM PL--STRM PL--STRM PL-0-0STRM PL-8-8STRM PL-6-6STRM Size Inches/ mm /,7 / 9,05 5, -/ 8, Dimensions E - E C - HT C - HE , , , * Important: Valves with tube stubs must be supplied with ASTM A69 compliant tube ends, tube stubs that do not meet this specification may not work with Presslok fittings and will not be covered by standard warranty. PL Series ball valves meet this standard. PL-08-08STRM-PLTE PL--STRM-PLTE PL-6-6STRM-PLTE PL--STRM-PLTE PL--STRM-PLTE PL-0-0STRM-PLTE PL-8-8STRM-PLTE PL-6-6STRM-PLTE Size Inches/ mm /,7 / 9,05 5, -/ 8, Dimensions E - E C - HT C - HE , , , Stainless Steel Ball Valve with Presslok Connections Stainless Steel Ball Valve with Presslok Connections PL-08-08STRPLTE PL--STRPLTE PL-6-6STRPLTE PL--STRPLTE PL--STRPLTE PL-0-0STRPLTE PL-8-8STRPLTE PL-6-6STRPLTE Size Inches/ mm /,7 / 9,05 5, -/ 8, Dimensions E - E C - HT C - HE ,9.67 9, , , Material List for Stainless Steel Ball Valves Item Description Material Qty. Body CF8M End Cap CFM/CF8M Ball CF8M Stem SS6 5 Ball Seat PTFE.TEFLON 6 Body Seal PTFE.TEFLON 7 Thrust Washer PTFE.TEFLON 8 Stem Packing PTFE.TEFLON 9 Stem Nut SS0 0 Handle SS0 Handle Nut SS0 A Handle Washer SS0 Body Bolt SS0 Bolt Washer SS0 Bolt Nut SS0 5 Handle Sleeve VINYL 6 Locking Device SS0 Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax PL-08-08STRPLTE-G60 PL--STRPLTE-G60 PL-6-6STRPLTE-G60 PL--STRPLTE-G60 PL--STRPLTE-G60 Size Inches/ mm /,7 / 9,05 5, -/ 8, Dimensions E - E C - HT C - HE , 00, ,.95 7,9.67 9,.90 99,06 CFOS Cleaning: Replace PL at beginning of part number with PLH Insert: (EPDM O-ring standard E) V in place of E in part number for Viton O-ring option K in place of E in part number for Perfluoroelastomer O-ring option PLHT in place of PLT for CFOS/-O cleaning & packaging Dimensions are +/ , , , ,5 Insert: V in place of E in part number for Viton O-ring option Pressure / Temperature Table * Ball valves with Pressfit ends rated to 00/00 psi CF

16 PL Series Integrated Ball Valve SHC Ball Valve with Presslok Connections X Compression M L DHC Ball Valve with Presslok X Presslok Connections PL-0-08**PLTE PL-0-**PLTE PL-08-**PLTE PL-0-6**PLTE PL-08-6**PLTE PL--6**PLTE PL-08-**PLTE PL--**PLTE PL-6-**PLTE PL-08-**PLTE PL--**PLTE PL-6-**PLTE PL--**PLTE PL-6-8**PLTE PL--8**PLTE PL--8**PLTE Main Size /,7 / 9,05 / 9,05 5, 5, 5, -/ 8, -/ 8, -/ 8, Branch Valve Size Inches/ mm / 6.5 / 6.5 /,7 / 6.5 /,7 / 9,05 /,7 / 9,05 5, /,7 / 9,05 5, -/ 8, 5, -/ 8, M , , , , , , , , , , , , , M (SHC).5 6, , , , , , 6.0 7, 6.0 7, 6.0 7, , , , , Presslok L NA NA 5.0 7,5 NA 5. 0, , , 6.0 7, 6.0 7, , , , , , ,87 CF PL-6-6**PLTE PL--6**PLTE PL--6**PLTE PL-8-6**PLTE , -/ 8, , , CF 7 89 CF SHC Ball Valve with Presslok Connections X Compression Dimensions are +/- 0. Dimensions are for reference only, certified drawings are available by consulting factory PL Series Valve Configuration Designator CFOS Cleaning: Replace PL at beginning of part number with PLH Valve Configuration: **SHC - Single Horizontal Cross Assembly **SHC - Single Horizontal Cross (-valve) Assembly **DHC - Double Horizontal Cross Assembly Outlet Connection Option: PLT - Presslok C - Compression M - 6SS ASTM A69 Compliant Tube Stub D - Capped Compression O-ring options: Replace E in part number with V (Viton) or K (Perfluoroelastomer) when specifying Presslok ends 5 Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

17 PL Series Ball Valve Manifold Assemblies L SHC Ball Valve with Presslok x Presslok Connections PL-08-****MPLT-** PL-08-6****MPLT-** PL--6****MPLT-** PL-08-****MPLT-** PL--****MPLT-** PL-6-****MPLT-** PL-08-****MPLT-** PL--****MPLT-** PL-6-****MPLT-** PL--****MPLT-** PL--8****MPLT-** PL-6-8****MPLT-** PL--8****MPLT-** PL--8****MPLT-** PL-6-6****MPLT-** PL--6****MPLT-** PL--6****MPLT-** PL-8-6****MPLT-** Main Size Inches/ mm / 9,05 5, 5, -/ 8, -/ 8, -/ 8, Branch Valve Size Inches/ mm /,7 /,7 / 9,05 /,7 / 9,05 5, /,7 / 9,05 5, -/ 8, / 9,05 5, -/ 8, 5, -/ 8, *M (longer lengths available) *M (longer lengths available) Presslok L.50,0.98 6,9.75 0, , ,00 5.,8 5. 0,0 5.5, , ,87 5.5, , , CF , , CF 7 89 CF DHC Ball Valve with Presslok x Presslok Connections SHC Ball Valve with Presslok x Presslok Connections Spool lengths: specified by adding overall length in inches to end of part number. Example: 0 = (spool 0 length) Total # Valves per Spool: Insert total number for each spool right after valve configuration designator. Example: SHC8 = (total number of valves) PL Series Valve Configuration Designator CFOS Cleaning: Replace PL at beginning of part number with PLH Valve Configuration: **SHC - Single Horizontal Cross Assembly **SHC - Single Horizontal Cross (-valve) Assembly **DHC - Double Horizontal Cross Assembly Outlet Connection Option: PLT - Presslok C - Compression M - 6SS ASTM A69 Compliant Tube Stub D - Capped Compression Example Lateral (SHC) O-ring options: Replace E in part number with V (Viton) or K (Perfluoroelastomer) when specifying Presslok ends Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

18 CFOS Manifolds Weld Free Installation Only Press Joint Every Spool PLHT Series Presslok Manifolds Fast 0% - 50% Cost Savings Eliminate Purge Argon Field Proven Technology O-ring guaranteed for lifetime of installation Guaranteed to x0-7 scc/sec He Dockweiler AG An der Autobahn 0/0 - D-906 Neustadt-Glewe - Germany - Phone +9 (0) Fax +9 (0) Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

19 Presslok Weld-free Manifolds Cost, time pressure, and lack of skilled labor combined with ever increasing demands on quality for CFOS gas systems call for new ways of thinking. The use of PLHT Presslok System eliminates welding and minimizes the dead volume between tube and ball valve flange. Prefabricated lateral sections spools can be supplied up to ft in length. Reduced Costs On-site welding eliminated Over 60% reduction in labor installation time Weld Argon required for assembly eliminated Reduced QA/QC weld inspection Reduced material handling Documentation package Flexibility Critical skilled labor can be redirected to other parts of plant construction Last minute changes in design can be made a few weeks prior to shipment Additional POC s can be added on-site with no welding, and minimal cost Enhanced Quality Manifolds fabricated in a controlled environment Fewer particles Cutting and facing eliminated, reduced potential for metal particle contamination 00% helium leak tested to X 0-7 scc/sec Complete QA/QC documentation package provided Condensed Schedule Parallel fabrication with building construction Weld free lateral assembly Reduced purge times on-site Reduced line qualification Dockweiler AG An der Autobahn 0/0 - D-906 Neustadt-Glewe - Germany - Phone +9 (0) Fax +9 (0) Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax

20 The PLT Series Presslok System Bridgeport Road Portland, Oregon 97 Phone: Fax: Web Site: NOTE: Product availability and specifications contained herein are subject to change without notice. Consult local distributor or factory for potential revisions. 0/7 9 Components Inc SW Bridgeport Road Portland, Oregon 97 USA Phone Fax