Building integrated duct systems

Transcription

1 Building integrated duct systes Residential ventilation Circular duct systes oods, grilles and transitions Dapers Silencers Valves and Grilles InCapsa InDoo ess doors essories 0 ir handling units Index

2 Content Manifold box MCU... MRU... MLU... MU... MCWU... Circular straight low-built See chapter Silencers KVDP... LRCB...0 Plenu box floor PGFU... syste of products, suitable for integration or ebedent in buildings. ll circular connections are with gaskets aording to Lindab Safe, which fulfills the toughest deands for air tightness. Spiral seaed steel ducts as well as seiflexible ducts can be connected with high safety against undesired leakage. Plenu box wall/ ceiling PGWU... Minial easures of the products eans flexibility in construction and installation. Should other solutions our, they can be ordered specially. Low levels of noise are ensured with our specially developed silencers, also suitable to be integrated in buildings. PVWU... These products, together with other Lindab products as dapers, silencers, valves and grilles, gives you a coplete high uality syste for residential ventilation. essories PVCU... FIKS... ll anifolds and plenu boxes have a Sart Lock function which allows a seiflexible duct to be fastened to the connections. Use the transition piece RCFU, with a clip for Sart Lock function, when connecting LFPE /0 to anifolds and plenu boxes. 0 Sliding daper SKG... Transition piece RCFU... Coupling NPU... Bend BU0... Seiflexible duct LFPE... We reserve the right to ake changes without prior notice

3 Manifold MCU L Ød Ød The anifold can be used for both supply and exhaust air. It is available in several types and diensions. The anifolds are designed for floor installation but can be used at other locations as well. MCU 0, 0 0-, Ød B ll types have couplings with Lindab safe sealings for connections of SR spiral-seaed ducts or seiflexible ducts LFPE. Use the transition piece RCFU, with Sart Lock function, to connect the LFPE /0-diension to InDoo anifolds and plenu boxes with Ø0 couplings. 0 Boxes with Ø couplings with Lindab safe sealings is intended for direct connection of the seiflexible duct LFPE /0. It is not intended for SR spiral-seaed duct. B The Sart Lock function allows you to fasten LFPE effortlessly to the Safe couplings. Two turnable anchor plates, placed on the botto of the anifold, can be used for fixation. Fulfills air tightness class D. L Ød Diension Ød Diension Ød Type MCU 0 0- Ød Ød Type L B -0 0,0 0-0,0 0,0 0 0-, , 0 0, , , 0 0 0, ,0 00 0, , , , We reserve the right to ake changes without prior notice

4 Manifold Technical data Supply Ød Ø [l/s] [l/s] Ød Ø Exhaust [l/s] Ød Ø Ød Ø [l/s] 0 We reserve the right to ake changes without prior notice

5 Manifold MRU L Ød Ød a The anifold can be used for both supply and exhaust air. It is available in several types and diensions. ll types have Ø studs with Lindab Safe sealings for connections of either SR spiral-seaed ducts or seiflexible ducts LFPE. The anifold is designed for floor installation but can be used everywhere, also in the ceiling for exaple. The Sart lock function allows you to fasten seiflexible ducts effortlessly to the Ø connections. Two turnable anchor plates, placed on the botto of the anifold, can be used for fixation. Fulfills air tightness class D. Ød Ød Type L a -0, , , 0-0 0,0 0 Technical data Supply 00 0 Ød Ø Exhaust 00 Ød Ø [l/s] Diension Ød Diension Ød Type MRU [l/s] We reserve the right to ake changes without prior notice

6 Manifold MLU Ød L a Ød The anifold can be used for both supply and exhaust air. It is available in several types and diensions. ll types have Ø studs with Lindab Safe sealings for connections of either SR spiral-seaed ducts or seiflexible ducts LFPE. The anifold is designed for floor installation but can be used everywhere, also in the ceiling for exaple. The Sart lock function allows you to fasten seiflexible ducts effortlessly to the Ø connections. Two turnable anchor plates, placed on the botto of the anifold, can be used for fixation. Fulfills air tightness class D. Ød Ød Type L a -0, , , 0-0 0,0 Technical data 0 Supply 00 0 Ød Ø Exhaust 00 Ød Ø [l/s] Diension Ød Diension Ød Type MLU [l/s] We reserve the right to ake changes without prior notice

7 Manifold MU L Ød h Ød 0 The anifold can be used for both supply and exhaust air. It is available in several types and diensions. The anifolds are designed for floor installation but can be used at other locations as well. ll types have couplings with Lindab safe sealings for connections of SR spiral-seaed ducts or seiflexible ducts LFPE. Use the transition piece RCFU, with Sart Lock function, to connect the LFPE /0-diension to InDoo anifolds and plenu boxes with Ø0 couplings. Boxes with Ø couplings with Lindab safe sealings is intended for direct connection of the seiflexible duct LFPE /0. It is not intended for SR spiral-seaed duct. The Sart Lock function allows you to fasten LFPE effortlessly to the Safe couplings. Two turnable anchor plates, placed on the botto of the anifold, can be used for fixation. Fulfills air tightness class D. Ød Ød Type L h ,0-0 0,0 0-0,0 0-0, , , , , , ,00 Diension Ød Diension Ød Type MU 0-0 We reserve the right to ake changes without prior notice

8 Manifold Technical data Supply Exhaust Ød Ø Ød Ø [l/s] [l/s] Ød Ø Ød Ø [l/s] [l/s] We reserve the right to ake changes without prior notice

9 Manifold MCWU Ød l B C l Ød 0 Manifold to connect vertical ducts to the horizontal ducts in the casting-in screed. Can be used for exhaust air as well as for supply air. The internal pressure drop is iniized due to the internal turning vane. Easy to clean in connection with T-piece and cover (TCPU+EPF), which gives aess to the duct syste up to the air handling unit. The Sart lock function allows you to fasten seiflexible ducts LFPE effortlessly to the Ø connections. Fulfills air tightness class D. Ød Ød Stubs pcs l Distribution (supply air) l B C , 0 0, 0, ( ) ( ) ( ) [l/s], uulation (exhaust air) ( ) ( ) ( ) MCWU 00 Diension Ød Diension Ød Nuber of Ø in-/outlets [l/s], We reserve the right to ake changes without prior notice

10 Plenu box floor PGFU h The plenu box is intended for supply and exhaust air. It is intended to aoodate grille B00, which can be supplied with the regulating daper GT or sliding daper SKG. It is designed for wall installation but can be used at other locations as well. It is telescopic for flexibility at installation. ll types have couplings with Lindab safe sealings for connections of SR spiral-seaed ducts or seiflexible ducts LFPE. Use the transition piece RCFU, with Sart Lock function, to connect the LFPE /0-diension to InDoo anifolds and plenu boxes with Ø0 couplings. Boxes with Ø couplings with Lindab safe sealings is intended for direct connection of the seiflexible duct LFPE /0. It is not intended for SR spiral-seaed duct. The Sart Lock function allows you to fasten LFPE effortlessly to the Safe couplings. The shown pressure drop is for the box including grille B00 and regulating sliding daper GT set in open position. Diension Ød # of Ø/0 Ød h 00 00, , , , , , , ,0 0 0 PGFU 00 Diension Ød Diension Ød Nuber of Ø /0 in-/outlets We reserve the right to ake changes without prior notice

11 Plenu box floor PGFU Technical data Supply Exhaust * * Ø * * 00 Ø [l/s] * One of the Ø is capped [l/s] * One of the Ø is capped Ø Ø [l/s] [l/s] We reserve the right to ake changes without prior notice

12 Plenu box wall PGWU h 0 The plenu box is intended for supply and exhaust air. It is intended to aoodate sliding daper SKG. It is designed for wall installation but can be used at other locations as well. It is telescopic for flexibility at installation. ll types have couplings with Lindab safe sealings for connections of SR spiral-seaed ducts or seiflexible ducts LFPE. Use the transition piece RCFU, with Sart Lock function, to connect the LFPE /0-diension to InDoo anifolds and plenu boxes with Ø0 couplings. Boxes with Ø couplings with Lindab safe sealings is intended for direct connection of the seiflexible duct LFPE /0. It is not intended for SR spiral-seaed duct. The Sart Lock function allows you to fasten LFPE effortlessly to the Safe couplings. The shown pressure drop is for the box including grille B00 and regulating sliding daper SKG set in open position. Diension Ød # of Ø/0 Ød h , , , , , , , , 0 PGWU 00 Diension Ød Diension Ød Nuber of Ø /0 in-/outlets We reserve the right to ake changes without prior notice

13 Plenu box wall PGWU Technical data Supply Exhaust Ø Ø 0 00 * * * * [l/s] * One of the Ø is capped [l/s] * One of the Ø is capped Ø Ø [l/s] [l/s] We reserve the right to ake changes without prior notice

14 Plenu box wall PVWU Ød B The plenu box is intended for supply and exhaust air. It is intended to aoodate a daper. It is designed for wall installation but can be used at other locations as well. ll types have couplings with Lindab safe sealings for connections of SR spiral-seaed ducts or seiflexible ducts LFPE. Use the transition piece RCFU, with Sart Lock function, to connect the LFPE /0-diension to InDoo anifolds and plenu boxes with Ø0 couplings. Boxes with Ø couplings with Lindab safe sealings is intended for direct connection of the seiflexible duct LFPE /0. It is not intended for SR spiral-seaed duct. The Sart Lock function allows you to fasten LFPE effortlessly to the Safe couplings. Fulfills the reuireents of air tightness class D. The shown pressure drop is for the box alone, which eans that the pressure drop for the valve has to be added. Ød Ød Ød # of Ø B 00 0, , , 0, 0-0,0 0 0, 0 0-0, , 0 PVWU 00 Diension Ød Diension Ød Nuber of Ø in-/outlets We reserve the right to ake changes without prior notice

15 Plenu box wall PVWU Technical data Supply Exhaust a b Ø a b Ø [l/s] [l/s] Ød Ø Ø d Ø [l/s] [l/s] We reserve the right to ake changes without prior notice

16 Plenu box PVCU Ød B The plenu box is intended for supply and exhaust air. It is intended to aoodate a valve. It is designed for ceiling installation but can be used at other locations as well. ll types have Ø studs with Lindab Safe sealings for connections of either SR spiral-seaed duct or seiflexible duct LFPE. Each Ø connection is euipped with a clip to hold the seiflexible duct LFPE Sart lock function. Fulfils the reuireents for air tightness class D. The shown pressure drop is for the box alone, which eans that the pressure drop for the valve has to be added. Technical data Supply [l/s] Ød Ø PVCU 00 Diension Ød Diension Ød Nuber of Ø in-/outlets Ød Ød Ø d # of Ø B 00 0, ,0 0, 0 0 0,0, Exhaust [l/s] 00 Ød Ø We reserve the right to ake changes without prior notice

17 Claping bracket FIKS 0 Ø B The claping brackets FIKS are used for fixation of ducts in connection with ounting or ebedent into the floor. There are two sizes for and ducts, respectively. Type B Weight FIKS 0 0 0,0 FIKS 0 0,0 FIKS 0, FIKS 0 0, 0 Nuber of ducts FIKS We reserve the right to ake changes without prior notice

18 Seiflexible duct LFPE ØD Ød as a corrugated outside and a sooth inner surface. Made of odorless polyethylene (PE) without and recycled aterial. Inner duct with antistatic additives and has icrobial properties aording to EN ISO. Ring stiffness >= kn/² aording to EN ISO. Can be bent to a radius of iniu 0. Diension fits Lindab Safe Ø. Diension 0 fits Lindab Safe Ø 0. Use the transition piece RCFU, with Sart Lock function, to connect the LFPE /0-diension to InDoo anifolds and plenu boxes. The sart lock function allows you to fasten LFPE effortlessly Outside/inside color: White Delivered in coils of 0. Miniu installation and use teperature: - ºC Maxiu installation and use teperature: +0 ºC Ød ØD l / , , 0 Diension Ød LFPE We reserve the right to ake changes without prior notice

19 Seiflexible duct LFPE Technical data Pressure drop Straight [Pa/] [l/s] Bent (length 0, ) [Pa/] [l/s] Bent 0 (length 0, ) [Pa/] [l/s] We reserve the right to ake changes without prior notice