Series CA9 Contactors

Transcription

1 Series C9 Contactors Sprecher + Schuh s C9 contactor line combines the simple function of our popular C7 series with the rugged performance demanded in this wide horsepower range. C9 contactors offer a smaller footprint than traditional contactors in this size class. large safety distance in front of the contactor is unnecessary. C9 contactors are also designed so that operation is impossible if the arc chambers are removed. Conversely, once the contactor is energized, the arc chambers cannot be removed. C9 Contactors The modern contactor for demanding applications up to 900HP (@460V) - up to 0HP (@ 7V) broad selection for middle horsepower applications The C9 range consists of sixteen contactors in six frame sizes covering motors from 7 to 900HP at 460V and from 00 to 0HP at 7V. This line is ideally suited for demanding applications such as steel mills, rock quarries, mines or for any middle horsepower application where a sturdy, durable contactor is needed. Electronic coils offer many advantages Behind the attractive outward appearance of the C9 contactor are advanced engineering solutions that offer convenience and savings. The entire line is equipped with an electronically controlled coil that reduces pick-up currents by 80% on average. Holding current is also reduced. Rugged and reliable C9 contactors conform to UL08, IEC and can be operated at rated voltages up to 600V (UL) and 000V (IEC). High thermal and switching capacities guarantee reliable operation and long life. rc quenching extends contact life ll C9 contactors are designed with sophisticated arc quenching techniques that extinguish damaging breaking arcs quickly. This is accomplished by guiding the arc away from the contacts and into arc chambers, which are built-in to every C9 cover. Safety first Other advantages of the C9 electronic coil include: Direct connection to a PLC. This is a standard feature in larger amp units and optional below 400. Overvoltage protection and suppression circuits are standard, eliminating interference from the coil Smooth, even operation over the entire voltage range minimizes the possibility of contact bounce No safeguards are necessary to bridge brief supply interruptions Precisely defined pick-up and drop-out voltages, eliminate the possibility of chattering Universal Electronic coils operate over a much broader C/DC voltage range, providing flexibility in applications and lower costs due to reduced inventory. Four coils cover six contactor frame sizes from 24-00V C and 24-00V DC. C9 arc chambers are completely enclosed (without arc exhaust vents), offering the best protection against hot arcing gases. 90mm 0mm 40mm 86mm 20mm 48mm (.4 ) (4. ) (. ) (7.2 ) (8.27 ) (7.24 ) visit for - ll pricing and shown the most in US up dollars to date - information FY9 SSN208

2 Non-Reversing, Three Pole Contactors With C/DC Coil, Series C9 (Open type only) ➊➌ I e [] Ratings for Switching C Motors (C2 / C ) uxiliary Open Type kw (0 Hz) UL/CS HP (60 Hz) Contacts per C- C- Ø Contactor (400V) (690V) 240V 400V 4V 440V 00V 690V 000V 200V 20V 460V 7V NO NC Catalog Number Price C L ➋ C9-6-EI-- -L ➋ C L ➋ 9.09 C9-46-EI-- -L ➋ C9-90--,6.66 C9-90-EI--, C9-20--, C9-20-EI--, C9-26--,9.8 C9-26-EI--, C ,66.64 C9-0-EI-- 2, C , C9-70-EI-- 2, C9-400-EI C9-460-EI--, C9-80-EI-- 7, C9-70-EI--, ~ C9-860-EI-- 7, ~ C9-060-EI-- 9, ~ 260 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ C9-260-EI-- 6, ~ 200 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ C9-200-EI-- 2, ~ 260 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ C9-260-EI-- 2,74.40 Contactors - C/DC Coil Three Pole - Series C9 C9-6 contactor C9-400-EI contactor C9 Contactors C9-_-EI coils are electronically controlled coils with the following characteristics: bility to connect directly to a low level signal source such as a PLC ~VDC (6m) to VDC (20m) Very low pull-in and holding current for contactors in this size class Threshold voltages for pull-in and drop-out are very precisely defined, eliminating chattering Supply voltage dips are bridged without extra equipment 0V 24V OFF ON Supply voltage 2 X Contactor ON OFF_N 2 COMMON C9-860-EI contactor PLC Interface EI connection Coil Codes Electronic Coils V 24-60V 48-0V 00-20V 20-00V C C/DC 24W 48W 20W 480W C9-6-EI 70-EI ~ ~ 20W 480W C9-400-EI 70-EI 24W ➍ 48W 20W 480W C/DC with C9-860-EI 060-EI ~ ~ 20W ~ PLC Input C9-260-EI 24W ➍ 48W 20W 480W C9-200-EI 260-EI ~ ~ 20W ~ Note: C open-type contactors include terminal bolts. If lugs are required, see page 94 for ordering information. Ordering Instructions Specify Catalog Number Replace ( ) with Coil Code See Coil Codes on this page ➊ -EI designates contactor coil with PLC input. Selections C with "EI" requires use of control logic on terminals, 2,. C9-400 contactors and larger include an integral switch to select use of "EI". ➋ C9-6(-EI) 46(-EI) include terminal lugs. To order with terminal bolts remove the letter -L at the end of the catalog number. For example C9-6(-EI)- --L becomes C9-6(-EI)- -. ➌ For UL/CS Elevator duty rating, consult on page 0. ➍ Coil is rated 24V 60V DC only. SSN208 visit for - ll pricing and shown the most in US up dollars to date - information FY9 9

3 C9 Contactors Reversing, Three Pole Contactors With C/DC Coil, Series C9 (Open type only) ➊➋ I e [] Ratings for Switching C Motors (C2 / C ) kw (0 Hz) UL/CS HP (60 Hz) uxiliary Contacts per Contactor C- C- Ø (400V) (690V) 240V 400V 4V 440V 00V 690V 000V 200V 20V 460V 7V NO NC Contactors, C/DC Coil Reversing Open Type ➌➍ Catalog Number CU L ➏, CU9-6-EI-22- -L ➏ 2, CU L ➏ 2,97.0 CU9-46-EI-22- -L ➏ 2, CU ,77.00 CU9-90-EI-22-, CU , CU9-20-EI-22-4, CU ,476.6 CU9-26-EI-22-4, CU , CU9-0-EI-22-, CU ,97.72 CU9-70-EI-22-6, CU9-400-EI-22-9, CU9-460-EI-22-, CU9-80-EI-22-6, CU9-70-EI-22-2, Larger sizes are possible. Contact your Sprecher + Schuh representative. Three Pole - Series CU9 Price CU9-90 Reversing Contactor Includes: Mechanical and electrical Interlock Reversing power wiring (using Power Wiring Kit Cat.# C9-PW ) ➌ Mounting plate (when required) Control wiring available; see footnote ➍ C9-_-EI coils are electronically controlled coils with the following characteristics: bility to connect directly to a low level signal source such as a PLC ~VDC (6m) to VDC (20m) Very low pull-in and holding current for contactors in this size class Threshold voltages for pull-in and drop-out are very precisely defined, eliminating chattering Supply voltage dips are bridged without extra equipment 24V 0V Coil Codes Electronic Coils V 24-60V 48-0V 00-20V 20-00V C C/DC 24W 48W 20W 480W C9-6-EI 70-EI ~ ~ 20W 480W C9-400-EI 70-EI 24W ➎ 48W 20W 480W C/DC with C9-860-EI 060-EI ~ ~ 20W ~ PLC Input C9-260-EI 24W ➎ 48W 20W 480W C9-200-EI 260-EI ~ ~ 20W ~ OFF ON Supply voltage 2 X Contactor ON OFF_N 2 COMMON PLC Interface EI connection Note: C open-type contactors include terminal bolts. If lugs are required, see page 94 for ordering information. ➌ For -LW Option Deduct the following from List Price C C ➍ For -CW Option dd the following to List Price ll CU Ordering Instructions Specify Catalog Number Replace ( ) with Coil Code See Coil Codes on this page ➊ -EI designates contactor coil with PLC input. Selections C with "EI" requires use of control logic on terminals, 2,. C9-400 contactors and larger include an integral switch to select use of "EI". ➋ For UL/CS Elevator duty rating, consult on page 0. ➌ For Reversing Contactors without power wiring add suffix -LW to catalog number. For example: CU becomes CU LW. Control wiring is not included. ➍ For control wiring, add suffix -CW to catalog number. For example: CU becomes CU CW. ➎ Coil is rated 24V 60V DC only. ➏ CU9-6(-EI) 46(-EI) include terminal lugs. To order with terminal bolts remove the letter -L at the end of the catalog number. For example CU9-6(-EI)-22- -L becomes CU9-6(-EI) visit for - ll pricing and shown the most in US up dollars to date - information FY9 SSN208

4 Hydraulic Elevator Wye Delta, with C Coils (Two Contactor Type ➊) UL/CS ELEVTOR DUTY mps CS Elevator Duty ➍ uxiliary Contacts per Contactor Open Type 200V 20V 460V 7V NO NC ➋ Catalog No. Price Selection C9Y LW ➎,77.84 C9Y2-6-EI-22- -LW ➎, C9Y LW ➎ 2,07.68 C9Y2-46-EI-22- -LW ➎ 2,77.88 C9Y LW,4.20 C9Y2-90-EI-22- -LW,46.40 C9Y LW,788. C9Y2-20-EI-22- -LW,890.7 C9Y LW 4,2.7 C9Y2-26-EI-22- -LW 4,22.9 C9Y LW 4,67.40 C9Y2-0-EI-22- -LW 4,79.60 C9Y LW 6,094.9 C9Y2-70-EI-22- -LW 6,96.9 Reduced Voltage Contactors Wye Delta - Series C9Y2 C9Y2-6 Wye-Delta contactor Includes: Mechanical and electrical Interlocks ➋ Mounting plate C9 Contactors C9 EI coils are electronically controlled coils with the following characteristics: bility to connect directly to a low level signal source such as a PLC ~VDC (6m) to VDC (20m) Very low pull-in and holding current for contactors in this size class Threshold voltages for pull-in and drop-out are very precisely defined, eliminating chattering Supply voltage dips are bridged without extra equipment Coil Codes Electronic Coils V 24-60V 48-0V 00-20V 20-00V C C/DC 24W 48W 20W 480W C9-6-EI 70-EI C/DC with PLC Input ~ ~ 20W 480W Ordering Instructions Specify Catalog Number Replace ( ) with Coil Code See Coil Codes on this page. ➊ -EI designates contactor coil with PLC input. Selections C with "EI" requires use of control logic on terminals, 2,. C9-400 contactors and larger include an integral switch to select use of "EI". ➋ One NC auxiliary contact on each contactor is used for electrical interlocking. ➌ Other voltages available, see page 96. ➍ HP selection based on CS Elevator Duty Ratings. ➎ C9Y2-6(-EI) 46(-EI) include terminal lugs. SSN208 visit for - ll pricing and shown the most in US up dollars to date - information FY9 92.

5 NO 28NO 7 uxiliary Contact Blocks uxiliary Contact Blocks Description NO NC uxiliary Contact Block for Side Mounting 2-Pole Two-way numbering for right or left mounting Easy mounting without tools Mirror contact performance to main contactor poles Low power switching down to 24V 0m Low Power uxiliary Contact Block for Side Mounting -Pole Two-way numbering for right or left mounting Easy mounting without tools Mirror contact performance to main contactor poles Electronic compatible, V m 0 0 NOTE: Up to four auxiliary contact blocks (8 poles) may be mounted on the side of the C9 contactor. One auxiliary contact block ( NO + NC) is mounted at the factory (inside left position). Contact rrangement NO NO 44 NO 4 NC 2 NC 2 NC 22 NC NO 4 NO NO 84 NO 4 NC 6 NC 72 NC 62 NC 7 NO 8 NO 8 NC NC 26 NO 27 NC 6 NC 2 ccessories - Field Installable For use with... C9 Contactors Catalog Number Price C Inside left or right C9-S- 9.9 C Inside left or right C9-S- 9.9 C Outside left or right C9-S2-9.9 C Outside left or right C9-S4-9.9 C Inside left or right C9-S-B0 ➊ 47.0 C Inside left or right C9-S-B0 ➊ 47.0 C Inside left or right C9-S-B0 ➊ 47.0 C Inside left or right C9-S-B0 ➊ 47.0 C9 Contactors Inside Left position (C9-S) Inside Left position (C9-S) Inside Left position (C9-S) Inside Right position (C9-S) Outside Left position (C9-S2) Outside Left position (C9-S2) Outside Left position (C9-S4) Outside Right position (C9-S4) C C Mechanical Interlocks ccessory Description For use with... Catalog Number Price Mechanical only, without auxiliary contacts Interlocking of two same size contactors Mechanical only, without auxiliary contacts C9-6 C9-70 C9-M C , C9-260 ➋ C , C ➌ C to C C to C C9-M C9-M C9-M C9-M Rod for vertical mounting reversing contactors C C9-VR Horizontal mechanical interlock C9-M_-00 Vertical mechanical interlock C9-VR70 ➊ Contact blocks cannot be mounted on the outside of C9-S-B* or C9-S-B*. ➋ Mounting plate ordered separately. ➌ Mounting plate included. SSN208 visit for - ll pricing and shown the most in US up dollars to date - information FY9 9

6 ccessories - Field Installable C9 Contactors C9 Contactors Terminal Lugs and ccessories Lug or ccessory Connection Wire Sizes For use with Terminal Lug Kit - Standard for C9-6-_-L 46-_-L Includes 2 sets, one for Line side and one for Load Side Catalog Number Price 2 x 6 WG /0 WG C9-6(-EI) 46(-EI) C9-CL Order Pkg for 2 kits Order Pkg for lugs Terminal Lugs ➊ Includes set of lugs for use on either Line or Load Side. Order qty of 2 for both. Terminal Enlargements Enlargement pieces designed to increase the width of the contactor terminal pads in order to allow larger connections to be mounted Terminal Extensions Extension pieces designed to extend the main terminals of contactors for combined mounting of contactors and connection sets 6 WG 00 MCM C9-90(-EI) 20(-EI) C9-TL WG 400 MCM C9-26(-EI) 70(-EI) C9-TL x 4 WG 00 MCM C9-26(-EI) 70(-EI) C9-TL70B 7.74 x 2/0 WG 00 MCM C9-400-EI 460-EI C9-TL x 2/0 WG 00 MCM C9-80-EI 70-EI, C9-260-EI C9-TL x 4/0 WG 00 MCM C9-860-EI C9-TL x /0 WG 70 MCM C9-060-EI C9-TL x /0 WG 70 MCM C9-060-EI C9-TL060B,22.6 C9-6(-EI) 46(-EI) C9-TE C9-90(-EI) 20(-EI) C9-TE C9-26(-EI) 70(-EI) C9-TE C9-400-EI 460-EI C9-TE C9-80-EI 70-EI C9-TE C9-260-EI C9-TE C9-6(-EI) 46(-EI) C9-TX C9-90(-EI) 20(-EI) C9-TX C9-26(-EI) 70(-EI) C9-TX C9-400-EI 460-EI C9-TX C9-80-EI 70-EI C9-TX Terminal Shrouds ccessory Description For use with... Catalog Number Price For contactors with Compression Lugs Package contains 2 shrouds, one for Line and one for Load side Not applicable when using C9-PWpower wiring kits. For contactors with Terminal Lugs Package contains 2 shrouds, one for Line and one for Load side Not applicable when using C9-PWpower wiring kits. For IP20 protection between contactor and overload relay on a non-reversing starter For IP20 protection between contactor and overload relay on a reversing starter C9-90(-EI) 20(-EI) C9-TS20C 8.2 C9-26(-EI) 70(-EI) C9-TS70C 8.2 C9-400-EI 460-EI C9-TS460C C9-80-EI 70-EI, 260-EI C9-TS70C 0.22 C9-6(-EI) 46(-EI) C9-TS46L 60.0 C9-90(-EI) 20(-EI) C9-TS20L 60.0 C9-26(-EI) 70(-EI) C9-TS70L 60.0 C9-400-EI 460-EI C9-TS460L 88.9 C9-80-EI 70-EI C9-TS70L 0.27 CT9-6(-EI) 46(-EI) C9-TC CT9-90(-EI) 20(-EI) C9-TC20.9 CUT9-6(-EI) 46(-EI) C9-TCR CUT9-90(-EI) 20(-EI) C9-TCR ➊ Contactors C are intended for busbar connection only. Lugs should be sourced separately and are not available from Sprecher + Schuh See page 09 for terminal wire ranges. 94 visit for - ll pricing and shown the most in US up dollars to date - information FY9 SSN208

7 ccessories - Field Installable C9 Contactors Power Wiring Connection Kits Connection Kits pplication For use with Catalog Number Price C9-6(-EI) 46(-EI) C9-PW C9-90(-EI) 20(-EI) C9-PW20 ➊ Reversing Power Wiring Kits C9-26(-EI) 70(-EI) C9-PW70 ➊ 40.7 C9-400-EI 460-EI C9-PW460 ➋ 6.08 C9-80-EI 70-EI C9-PW70 ➋ Delta Contactor Wye Contactor C9-6(-EI) 46(-EI) C9-6(-EI) 46(-EI) C9-PWD C9-PW46 C9-90(-EI) 20(-EI) C9-6(-EI) 46(-EI) C9-PWD90.6 C9-90(-EI) 20(-EI) C9-90(-EI) 20(-EI) C9-PWD Wye-Delta Power Wiring Kits C9-26(-EI) 70(-EI) C9-90(-EI) 20(-EI) C9-PWD C9-26(-EI) 70(-EI) C9-26(-EI) 70(-EI) C9-PWD70 6. C9-400-EI 460-EI C9-400-EI 460-EI C9-PWD C9-PWD460 C9-80-EI 70-EI C9-400-EI 460-EI C9-PWD C9-80-EI 70-EI C9-80-EI 70-EI C9-PWD C9-6(-EI) 46(-EI) C9-PWY C9-90(-EI) 20(-EI) C9-PWY Shorting Bar C9-26(-EI) 70(-EI) C9-PWY C9-400-EI 460-EI C9-PWY C9-80-EI 70-EI C9-PWY C9 Contactors Mounting Plates (For C Contactors) pplication Description For use with Catalog Number Price Non-Reversing Starters C9-6(-EI) 46(-EI) C9-MS C9-90(-EI) 20(-EI) C9-MS20.4 C9-6(-EI) 46(-EI) C9-MR C9-90(-EI) 20(-EI) C9-MR Reversing Contactors C9-26(-EI) 70(-EI) C9-MR C9-400-EI 460-EI C9-MR C9-80-EI 70-EI C9-MR70 8. Reversing Starters C9-6(-EI) 46(-EI) C9-MRS C9-90(-EI) 20(-EI) C9-MRS ➊ Power wiring kit includes one set of terminal extensions C9-TX_. If terminal lugs C9-TL_ are to be used on line and load side of reversing contactor, a second set of C9-TX_ terminal extensions is required. ➋ If terminal lugs C9-TL_ are to be used on the line and load side of reversing contactor, two sets of terminal extensions C9-TX_ are also required (none included). SSN208 visit for - ll pricing and shown the most in US up dollars to date - information FY9 9

8 Renewal Parts C9 Contactors C9 Contactors Renewal Coils - C/DC, Electronic Coil Electronic Coil (typical) For use with... Voltage Coil Code Catalog Number Price/ Set Replacement Coil without EI Interface includes coil and cover Replacement Coil with EI Interface includes coil, cover and face plate C9-6 C9-6-EI C9-46 C9-46-EI C9-90 C9-20 C9-90-EI C9-20-EI C C9-26-EI C9-0-EI C9-70-EI C9-400-EI, C9-460-EI C EI, C9-260-EI C9-860-EI 060-EI, C9-200-EI 24-60V C/DC 24W C9-TG9 48-0V C/DC 48W C9-TG V C/DC 20W C9-TG V C/DC 480W C9-TG V C/DC w/ PLC Interface 20W C9-TGE V C/DC w/ PLC Interface 480W C9-TGE V C/DC 24W C9-TG V C/DC 48W C9-TG V C/DC 20W C9-TG V C/DC 480W C9-TG V C/DC w/ PLC Interface 20W C9-TGE V C/DC w/ PLC Interface 480W C9-TGE V C/DC 24W C9-TG V C/DC 48W C9-TG V C/DC 20W C9-TG V C/DC 480W C9-TG V C/DC w/ PLC Interface 20W C9-TGE V C/DC w/ PLC Interface 480W C9-TGE V C/DC w/ PLC Interface 20W C9-TGE V C/DC w/ PLC Interface 480W C9-TGE V C/DC 24W C9-TG V C/DC 48W C9-TG V C/DC 20W C9-TG V C/DC 480W C9-TG V C/DC w/ PLC Interface 20W C9-TGE V C/DC w/ PLC Interface 480W C9-TGE V C/DC w/ PLC Interface 20W C9-TGE V C/DC w/ PLC Interface 480W C9-TGE V C/DC w/ PLC Interface 20W C9-TGE V C/DC w/ PLC Interface 480W C9-TGE V DC 24W C9-THE V C/DC 48W C9-THE V C/DC 20W C9-THE V C/DC 480W C9-THE V DC 24W C9-TJE V C/DC 48W C9-TJE V C/DC 20W C9-TJE V C/DC 480W C9-TJE V C/DC 20W C9-260-EI 00-20V C/DC 20W C9-TKE90 ➊ C9-TKE904 ➋ C9-TLE90 ➊ C9-TLE904 ➋ ➊ One set of two (2) coils. ➋ Printed circuit board. 96 Discount Schedule B6 visit for - ll pricing and shown the most in US up dollars to date - information FY9 SSN208

9 Renewal Contact Kits and rc Chutes Description For use with... Catalog Number Contact Kits rc Chutes Price/ Set C9-6(-EI) C C9-46(-EI) C C9-90(-EI) C C9-20(-EI) C C9-26(-EI) C C9-0(-EI) C9-0,4.86 C9-70(-EI) C9-70,79.70 C9-400-EI C9-400,6.64 C9-460-EI C , C9-80-EI C9-80 2, C9-70-EI C9-70 4,06.46 C9-860-EI C , C9-060-EI C9-060,72.98 C9-260-EI C ,24.0 C9-200-EI C , C9-260-EI C9-260 ➊ 6,20.6 C9-400-EI 460-EI C9-C C9-80-EI 70-EI, C9-260-EI C9-860-EI 060-EI, C9-200-EI C9-C C9-C C9-260-EI C9-C Renewal Parts C9 Contactors C9 Contactors Replacement Terminal Hardware Description For use with... Catalog Number Standard Screws and Washers Price/ Set C9-6 46(-EI) C9-HF C (-EI) C9-HF20.96 C (-EI) C9-HF C EI C9-HF C9-80, 70, 060-EI C9-HF C9-200-EI C9-HF C9-260-EI C9-HF ➊ Movable contacts only. SSN208 Discount Schedule B6 visit for - ll pricing and shown the most in US up dollars to date - information FY9 97

10 C9 Contactors Contactors Cross Reference, Series C & C6 to Series C9 (Open Type Only) ➊ I e [] Ratings for Switching C Motors (C2 / C / C4) kw (0 Hz) UL/CS HP (60 Hz) 400V / Ø Ø C- C- 20V 4V 00V 690V V 20V 200V 20V 460V 7V Obsolete Contactor Cross Reference Series C Obsolete Catalog Number C or C6 to C9 Contactors Series C6 Obsolete Catalog Number / C6- Series C9 Equivalent Catalog Number C C / C C C /0 98 ~ C C9-90 ~ ~ C C / ~ C6-20 ~ ~ C / ~ ~ C C / ~ ~ C C9-0 ~ ~ C / C / ~ ~ C C / C ~ ~ C / C ~ ~ ~ C / ~ C9-860 C-0 Contactor C6-40-EI contactor ➊ vailable auxiliary contacts may vary. See selection pages for more information. 98 visit for - ll pricing and shown the most in US up dollars to date - information FY9 SSN208

11 General Data Rated Isolation Voltage U i IEC UL; CS C Rated Voltage U imp (kv) 8 Rated Voltage U e - Main Contacts [V] [V] 000V 600V C 0/60Hz [V],200,20,240,400,4,460,00,7,690,000 DC [V] 24, 48, 0, 220, 440 Operating Frequency for C Loads [Hz] 0/60Hz Electromagnetic compatibility IEC Environment Insulation Class of the Coil Class F per IEC Rated Coil Frequency mbient Temperature C 0/60 Hz, DC Storage [ºC] Operation at rated voltage [ºC] Max. ltitude of Installation Site [m] 000 Climatic Withstand C9-6 70: C : IEC Test Db & IEC test Bd & IEC test b (report 469) IEC test Ba & Bb & IEC test a & b, IEC Resistance to Shock IEC Resistance to Vibration IEC Protection Class Contactor main contacts Contactor coil terminals uxiliary contacts Functional Safety Data (C9-6 C9-70) ➊ IP00 P2X (in connected state) P2X (in connected state) C9-6 70: B0:.0E+06 operations at 0% max. C- load Failure ration: 7% failure to open, 2% failure to close B0:.0E+06 operations mechanical only Failure ration: 0% failure to open, 0% failure to close C : B0:.0E+0 operations at 0% max. C- load Failure ration: 7% failure to open, 2% failure to close B0:.0E+06 operations mechanical only Failure ration: 0% failure to open, 0% failure to close C9 Contactors C9 Contactors Standards pprovals Certifications IEC/EN , Low-voltage switch gear and control gear; IEC/EN , Low-voltage switch gear and control gear, Contactors and motor starters; IEC/EN , Low-voltage switch gear and control gear, Control circuit devices and switching elements; UL , Industrial Control Equipment (US); CS C22.2 No. 4, Industrial Control Equipment (Canada) Mechanically Linked Contacts: IEC , nnex L Mirror Contacts: IEC , nnex F culus, File No. E480/E9620 (contactors, reversing contactors) CCC, EC, RIN, BS, RCM CE, SUV C with all C9-S* side mounted NC auxiliary contacts SSN208 visit for - ll pricing and shown the most in US up dollars to date - information FY9 99

12 C9 Contactors Electrical Data, Main Circuits Coil Type: Electronic C9-6 C9-46 C9-90 C9-20 C9-26 C9-0 C- ctive Power Load (0/60Hz) mbient temperature 690V [] ºC 000V [] ~ mbient temperature 60ºC mbient temperature 70ºC C9-70 C9-400 C9-460 C9-80 C9-70 C9-860 C9-060 C9 Contactors 20V [kw] V [kw] V [kw] V [kw] V [kw] V [kw] V [kw] ~ V [] V [] ~ V [kw] V [kw] V [kw] V [kw] V [kw] V [kw] V [kw] ~ V [] V [] ~ V [kw] V [kw] V [kw] V [kw] V [kw] V [kw] V [kw] ~ With conductor sizes [mm 2 ] ➊ ➋ 2x8➋ 2x8 2x240 2x ➌ 000➍ 00➍ 000➌ 2000➍ 000➍ C9-260 C9-200 C9-260 ➊ For currents above 27, use terminal extensions. ➋ For currents above 40, use terminal extensions. ➌ Maximum connection bar width 0mm. ➍ Maximum connection bar width 00mm. 00 visit for - ll pricing and shown the most in US up dollars to date - information FY9 SSN208

13 Electrical Data, Main Circuits Coil Type: Electronic C9-6 C9-46 C9-90 C9-20 C9-26 C9 Contactors Switching of -phase Motors; (0Hz) mbient temperature V [] ~ ~ ~ 60ºC, C-2, C V [] ~ ~ ~ C9-0 C9-70 4V [] ~ ~ ~ 440V [] ~ ~ ~ 00V [] ~ ~ ~ 690V [] ~ ~ ~ 000V [] ~ ~ ~ V [kw] ~ ~ ~ V [kw] ~ ~ ~ 4V [kw] ~ ~ ~ 440V [kw] ~ ~ ~ 00V [kw] ~ ~ ~ 690V [kw] ~ ~ ~ 000V [kw] ~ ~ ~ C9-400 C9-460 C9-80 C9-70 C9-860 C9-060 C9-260 C9-200 C9-260 C9 Contactors Load Carrying Capacity per culus General Purpose Current (enclosed) Rated Power (enclosed) -Phase with poles in series [] V [] ~ ~ ~ 20V [] ~ ~ ~ 460V [] ~ ~ ~ 7V [] ~ ~ ~ 200V [HP] ~ ~ ~ ~ ~ 20V [HP] ~ ~ ~ 460V [HP] ~ ~ ~ 7V [HP] ~ ~ ~ 260V DC [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 00V DC [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 40V DC [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 600V DC [] ~ ~ ~ ~ ~ ~ ~ ~ SSN208 visit for - ll pricing and shown the most in US up dollars to date - information FY9 0

14 C9 Contactors Electrical Data, Main Circuits Coil Type: Electronic C9-6 C9-46 C9-90 C9-20 C9-26 C9-0 C9-70 C9-400 C9-460 C9-80 C9-70 C9-860 C9-060 C9 Contactors Switching of -phase Motors, (0Hz) mbient temperature 20V [] ~ ~ ~ ~ ~ ~ ~ 60ºC, C-4 240V [] ~ ~ ~ ~ ~ ~ ~ 400V [] ~ ~ ~ ~ ~ ~ ~ 4V [] ~ ~ ~ ~ ~ ~ ~ 00V [] ~ ~ ~ ~ ~ ~ ~ 690V [] ~ ~ ~ ~ ~ ~ ~ 000V [] ~ ~ ~ ~ ~ ~ ~ ~ 20V [kw] ~ ~ ~ ~ ~ ~ ~ 240V [kw] ~ ~ ~ ~ ~ ~ ~ 400V [kw] ~ ~ ~ ~ ~ ~ ~ 4V [kw] ~ ~ ~ ~ ~ ~ ~ 00V [kw] ~ ~ ~ ~ ~ ~ ~ 690V [kw] ~ ~ ~ ~ ~ ~ ~ 000V [kw] ~ ~ ~ ~ ~ ~ ~ ~ C-4 at approximately 200,000 operations 20V [] ~ ~ ~ ~ ~ ~ ~ 240V [] ~ ~ ~ ~ ~ ~ ~ 400/4V [] ~ ~ ~ ~ ~ ~ ~ 00V [] ~ ~ ~ ~ ~ ~ ~ 690V [] ~ ~ ~ ~ ~ ~ ~ 000V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 20V [kw] ~ ~ ~ ~ ~ ~ ~ 240V [kw] ~ ~ ~ ~ ~ ~ ~ 400V [kw] ~ ~ ~ ~ ~ ~ ~ 4V [kw] ~ ~ ~ ~ ~ ~ ~ 00V [kw] ~ ~ ~ ~ ~ ~ ~ 690V [kw] ~ ~ ~ ~ ~ ~ ~ 000V [kw] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ Max. switching frequency [ops/hr] ~ ~ ~ ~ ~ ~ ~ C9-260 C9-200 C9-260 Wye-Delta (60Hz) 200V [HP] ~ ~ ~ 20V [HP] ~ ~ ~ 460V [HP] ~ ~ ~ 7V [HP] ~ ~ ~ 02 visit for - ll pricing and shown the most in US up dollars to date - information FY9 SSN208

15 C9 Contactors Electrical Data, Main Circuits Coil Type: culus Elevator Duty Electronic C9-6 C9-46 C9-90 C9-20 C9-26 C9-0 C V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ 20V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ 460V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ 7V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ 200V [HP] ~ ~ ~ ~ ~ ~ ~ ~ ~ 20V [HP] ~ ~ ~ ~ ~ ~ ~ ~ ~ 460V [HP] ~ ~ ~ ~ ~ ~ ~ ~ ~ 7V [HP] ~ ~ ~ ~ ~ ~ ~ ~ ~ C9-400 C9-460 C9-80 C9-70 C9-860 C9-060 C9-260 C9-200 C9-260 C9 Contactors culus HVC pplications Definite purpose rating (-Phase) FL [] ~ ~ ~ ~ ~ ~ ~ ~ ~ LR 20V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ 460V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ 7V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ C resistance heating 600V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ Star-Delta Starting (0Hz) 20V [] ~ ~ ~ 240V [] ~ ~ ~ 400V [] ~ ~ ~ 4V [] ~ ~ ~ 00V [] ~ ~ ~ 690V [] ~ ~ ~ 000V [] ~ ~ ~ ~ ~ ~ 20V [kw] ~ ~ ~ ➊ 240V [kw] ~ ~ ~ 400V [kw] ~ ~ ~ 4V [kw] ~ ~ ~ 00V [kw] ~ ~ ~ 690V [kw] ~ ~ ~ 000V [kw] ~ ~ ~ ~ ~ ~ ➊ Power rating at 0Hz. Preferred values according to IEC ➎ Data not available at time of printing. SSN208 visit for - ll pricing and shown the most in US up dollars to date - information FY9 0

16 C9 Contactors Electrical Data, Main Circuits Coil Type: Electronic C9-6 Switching of Power Trasnformers, C-6a (0Hz) Inrush Current = n Rated transformer current n = 0 C9-46 C9-90 C9-20 C9-26 C9-0 C V [] ~ ~ 240V [] ~ ~ 400V [] ~ ~ 4V [] ~ ~ 00V [] ~ ~ 62 ~ ~ 690V [] ~ ~ 62 ~ ~ 000V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 20V [kw] ~ ~ 240V [kw] ~ ~ 400V [kw] ~ ~ 4V [kw] ~ ~ 00V [kw] ~ ~ 4 ~ ~ 690V [kw] ~ ~ 4 ~ ~ 000V [kw] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ n = V [] ~ ~ 4 ~ ~ n = 690V [] ~ ~ 724 ~ ~ C9-400 C9-460 C9-80 C9-70 C9-860 C9-060 C9 Contactors C9-260 C9-200 C Hz Peak Inrush/peak rated transformer current 660V [] ~ ~ 200V [kv] ~ ~ 208V [kv] ~ ~ n = 0 240V [kv] ~ ~ 480V [kv] ~ ~ 600V [kv] ~ ~ 660V [kv] ~ ~ 660V [] ~ ~ 200V [kv] ~ ~ 208V [kv] ~ ~ n = V [kv] ~ ~ 480V [kv] ~ ~ 600V [kv] ~ ~ 660V [kv] ~ ~ 660V [] ~ ~ 200V [kv] ~ ~ 208V [kv] ~ ~ n = 240V [kv] ~ ~ 480V [kv] ~ ~ 600V [kv] ~ ~ 660V [kv] ~ ~ 04 visit for - ll pricing and shown the most in US up dollars to date - information FY9 SSN208

17 Electrical Data, Main Circuits Coil Type: Electronic C9-6 C9-46 C9-90 C9-20 C9-26 C9 Contactors Switching of -Phase Capacitors, C-6b (0Hz) 20V [kvar] ~ ~ ~ Single capacitor 40ºC Single capacitor ºC Single capacitor 70ºC 60Hz Single Capacitor - 40ºC C9-0 C V [kvar] ~ ~ ~ 400V [kvar] ~ ~ ~ 4V [kvar] ~ ~ ~ 00V [kvar] ~ ~ ~ 690V [kvar] ~ ~ ~ 000V [kvar] ~ ~ ~ ~ ~ ~ 20V [kvar] ~ ~ ~ 240V [kvar] ~ ~ ~ 400V [kvar] ~ ~ ~ 4V [kvar] ~ ~ ~ 00V [kvar] ~ ~ ~ 690V [kvar] ~ ~ ~ 000V [kvar] ~ ~ ~ ~ ~ ~ 20V [kvar] ~ ~ ~ 240V [kvar] ~ ~ ~ 400V [kvar] ~ ~ ~ 4V [kvar] ~ ~ ~ 00V [kvar] ~ ~ ~ 690V [kvar] ~ ~ ~ 000V [kvar] ~ ~ ~ ~ ~ ~ 200V [kvar] ~ 46 ~ ~ ~ 20V [kvar] ~ 98 ~ ~ ~ 460V [kvar] ~ 82 ~ ~ ~ 600V [kvar] ~ 040 ~ ~ ~ C9-400 C9-460 C9-80 C9-70 C9-860 C9-060 C9-260 C9-200 C9-260 C9 Contactors Switching of Lamps Gas discharge lamps C-a (Open) [] UL Ballast Ratings [] ~ ~ ~ ~ ~ ~ ~ ~ ~ Filament C-b 20/240V [] SSN208 visit for - ll pricing and shown the most in US up dollars to date - information FY9 0

18 C9 Contactors Electrical Data, Main Circuits Coil Type: Electronic C9-6 C9-46 C9-90 C9-20 C9-26 Switching of DC Loads Non-inductive or slightly inductive loads or resistance furnaces DC- at 60ºC 24V [] ~ 48/60V [] ~ -Pole 0V [] ~ ~ ~ ~ ~ 220V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 440V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 24V [] ~ 48/60V [] ~ 2 Poles in series 0V [] ~ 220V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ 440V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 24V [] ~ 48/60V [] ~ -Poles in series 0V [] ~ 220V [] ~ ~ 440V [] ~ ~ ~ ~ ~ ~ ~ ~ Shunt-wound motors Starting, reverse current breaking, reversing, stepping DC-, 60ºC 24V [] ~ ~ ~ ~ ~ 48/60V [] ~ ~ ~ ~ ~ -Poles in series 0V [] ~ ~ ~ ~ ~ 220V [] ~ ~ ~ ~ ~ 440V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ C9-0 C9-70 C9-400 C9-460 C9-80 C9-70 Series-wound motors Starting, reverse current breaking, reversing, stepping DC-, 60ºC 24V [] ~ ~ ~ ~ ~ 48/60V [] ~ ~ ~ ~ ~ -Poles in series 0V [] ~ ~ ~ ~ ~ 220V [] ~ ~ ~ ~ ~ 440V [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ C9-860 C9-060 C9 Contactors Short Time Withstand l cw 60 C s [] s [] s [] min [] min [] Resistance and Power Dissipation Main current circuit resistance [mω] Power dissipation per pole at I e C-, 400V [W] Power dissipation per pole at I e C-, 400V [W] ~ ~ ~ Total power dissipation at: I e C, 400V; C/DC control 20-20V) [W] ~ ~ ~ Maximum Switching Frequency C- ops/hr C- ops/hr ~ ~ ~ C-2, C-4 ops/hr ~ ~ ~ C9-260 C9-200 C9-260 Weight C/DC (Electronic) with bar connections with built-in cable clamps kg (lbs) (.) (.) (6.6) (6.6) (0.2) (0.2) (0.2) (26.4) (26.4) () () (74.8) (77) (.2) (77) (99) kg.7.7 (lbs) (.8) (.8) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 06 visit for - ll pricing and shown the most in US up dollars to date - information FY9 SSN208

19 C9 Contactors Short Circuit Ratings C9-6 C9-46 C9-90 Short Circuit Coordination (Max. Fuse or Circuit Breaker Rating) per IEC DIN Fuses -gg C9-20 C9-26 C9-0 C9-70 C9-400 C9-460 C k vailable Fault Current Type 2 (400V) [] ~ ~ ~ DIN Fuses -gg 80 k vailable Fault Current Type 2 (690V) [] ~ ~ ~ MCCB 70 k vailable Fault Current Type 2 (400V) [] ~ ~ ~ C9-70 C9-860 C9-060 C9-260 C9-200 C9-260 C9 Contactors Short Circuit Coordination (Max. Fuse or Circuit Breaker Rating) per UL and CS 22.2 No. 4 (contactor and fuses or circuit breaker only) UL Class RK Fuses 0 k vailable Fault Current Type Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Class J and CS HRCI-J Fuses 82 k vailable Fault Current Type Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Class J and CS HRCI-J Fuses 00 k vailable Fault Current Type Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ Type 2 Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ UL Class L Fuses 8 k vailable Fault Current Type Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Class L Fuses 0 k vailable Fault Current Type Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Class L Fuses 8 k vailable Fault Current Type Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Class L Fuses 00 k vailable Fault Current Type Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ 600 ~ ~ Type 2 Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Inverse-Time Circuit 42 k vailable Fault Current Type Combination (480V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Inverse-Time Circuit 6 k vailable Fault Current Type Combination (480V) [] ~ ~ ~ ~ ~ UL Inverse-Time Circuit 84 k vailable Fault Current Type Combination (480V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Inverse-Time Circuit 89 k vailable Fault Current Type Combination (480V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Inverse-Time Circuit 00 k vailable Fault Current Type Combination (480V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Inverse-Time Circuit 2 k vailable Fault Current Type 2 Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Inverse-Time Circuit k vailable Fault Current Type 2 Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ UL Inverse-Time Circuit 42 k vailable Fault Current Type Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Inverse-Time Circuit 0 k vailable Fault Current Type Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ UL Inverse-Time Circuit 6 k vailable Fault Current Type Combination (600V) [] ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ SSN208 visit for - ll pricing and shown the most in US up dollars to date - information FY9 07

20 C9 Contactors Coil Data Coil type: Electronic Operating Limits 0/60 Hz DC control 24 60V C 48 0V C 00 20V C 20 00V C 24 60V DC 48 0V DC 00 20V DC 20 00V DC C C C C C C C9 Contactors C9-260 C pick-up [xus] 0.8. dropout [xus] 0. pick-up [xus] dropout [xus] 0. pick-up [V] ~ ~ ~ ~ ~ hold-in [V] ~ ~ ~ ~ ~ pick-up [V] ~ 00 ~ hold-in [V] ~ 2 ~ pick-up [V] hold-in [V] pick-up [V] ~ 98 ~ hold-in [V] ~ 2 ~ pick-up [W] ~ 78 ~ hold-in [W] ~. ~ pick-up [W] ~ 20 ~ hold-in [W] ~ ~ pick-up [W] hold-in [W] pick-up [W] ~ 90 ~ hold-in [W] ~ 7. ~ Operating Times C or DC With PLC Interface closing delay [ms] opening delay [ms] closing delay [ms] opening delay [ms] visit for - ll pricing and shown the most in US up dollars to date - information FY9 SSN208

21 7 Mechanical Data Main Terminals Conductor Cross Sections - Main Contacts Terminal Type C9-6 Ø 6. C9-46 C9-90 Ø C C9-26 C Ø C9-70 C Ø 0. Ø 6. C C Ø 6. Ø 2. C C9-860 Ø C C9 Contactors () conductor [mm 2 ] ~ ~ ~ ~ ~ ~ Clamp Type C9-CL46 C9-TL20 C9-TL70 ~ ~ ~ ~ ~ ~ Recommended torque [Nm] ~ ~ ~ ~ ~ ~ (2) conductors [mm 2 ] 0 9 ~ ~ ~ Clamp Type C9-CL46 ~ C9-TL70B C9-TL80 C9-TL70 C9-TL860 C9-TL060 ~ ~ Recommended torque [Nm] 8 ~ ~ ~ () conductors [mm 2 ] ~ ~ ~ ~ ~ Clamp Type ~ ~ ~ ~ C9-TL70 C9-TL860 C9-TL060 C9-TL70 Recommended torque [Nm] ~ ~ ~ ~ ~ (4) conductors [mm 2 ] ~ ~ ~ ~ ~ ~ ~ Clamp Type ~ ~ ~ ~ ~ C9-TL860 C9-TL060 ~ Recommended torque [Nm] ~ ~ ~ ~ ~ 4 7 ~ ~ (6) conductors [mm 2 ] ~ ~ ~ ~ ~ ~ ~ ~ Clamp Type ~ ~ ~ ~ ~ ~ C9-TL060B ~ Recommended torque [Nm] ~ ~ ~ ~ ~ ~ 7 ~ ~ L L max. [mm] Ø ø min. [mm] Recommended torque [Nm] Ø C C C9-260 Ø (C9-200) 0 (C9-260) 2 C9 Contactors Cross Section per culus () conductor [WG] 6 / MCM MCM ~ ~ ~ ~ ~ ~ Clamp Type C9-CL46 C9-TL20 C9-TL70 ~ ~ ~ ~ ~ ~ Recommended torque [lb-in] ~ ~ ~ ~ ~ ~ (2) conductors [WG] 6 /0 ~ 4 00 MCM 2/0 00 MCM 2/0 00 MCM 4/ MCM / MCM 2/ MCM ~ Clamp Type C9-CL46 ~ C9-TL70B C9-TL80 C9-TL70 C9-TL860 C9-TL060 C9-TL70 ~ Recommended torque [lb-in] 80 ~ ~ () conductors [WG] ~ ~ ~ ~ 2/0 00 MCM 4/ MCM / MCM 2/ MCM ~ Clamp Type ~ ~ ~ ~ C9-TL70 C9-TL860 C9-TL060 C9-TL70 Recommended torque [lb-in] ~ ~ ~ ~ ~ (4) conductors [WG] ~ ~ ~ ~ ~ 4/ MCM / MCM ~ ~ Clamp Type ~ ~ ~ ~ ~ C9-TL860 C9-TL060 ~ Recommended torque [lb-in] ~ ~ ~ ~ ~ 7 00 ~ ~ (6) conductors [WG] ~ ~ ~ ~ ~ ~ / MCM ~ ~ Clamp Type ~ ~ ~ ~ ~ ~ C9-TL060B ~ Recommended torque [lb-in] ~ ~ ~ ~ ~ ~ 00 ~ ~ L L max. [in] Ø ø min. [in] Recommended torque [lb-in] Conductor Cross Sections Coil Terminals Terminal Type () conductor [mm 2 ] (2) conductors [mm 2 ] () conductor [mm 2 ] 4 (2) conductors [mm 2 ] 4 Recommended torque [Nm].2 Cross section per culus [WG] 8 4 Recommended torque [lb-in] SSN208 visit for - ll pricing and shown the most in US up dollars to date - information FY9 09

22 C9 Contactors Electrical Data, uxiliary Contacts For Reversing and Non-Reversing C9-S/2* C9-S/4* C9-S*-B* Switching of C Loads Rated Insulation voltage U i 690V 690V 20V Rated Operational voltage U e 690V 690V 2V Rated Impulse Withstand voltage U imp 6kV 6kV.kV C-2 I th at 40ºC [] C-4 at rated voltage of C- at rated voltage of Switching of DC Loads DC-2 L/R < ms resistive loads at DC-2 L/R < ms inductive loads with economy resistor in series at DC- switching electromagnetics at at 60ºC [] ~ ~ ~ 24V [] ~ ~ 0. 42/48V [] ~ ~ 0. 20V [] ~ ~ 0. 24V [] 6 6 ~ 42/48V [] 6 6 ~ 20V [] 6 6 ~ 20V [] 4 4 ~ 240V [] 4 4 ~ 400V [] ~ 4V [] ~ 00V [] 2 2 ~ 690V [] 2 2 ~ 24V DC [] ~ ~ 0. 48V DC [] ~ ~ 0. 0V DC [] ~ ~ V DC [] ~ ~ ~ 440V DC [] ~ ~ ~ 24V DC [] ~ ~ ~ 48V DC [] ~ ~ ~ 0V DC [] ~ ~ ~ 220V DC [] ~ ~ ~ 440V DC [] ~ ~ ~ 24V DC [] 6 ~ 48V DC []. 2.8 ~ 0V DC [] ~ 220V DC [] ~ 440V DC [] ~ ~ ~ C9 Contactors Fuse gg Short-circuit protection with no welding of contacts per IEC [] [] Protective Separation per IEC , nnex N Min. Switching capacity at 24V IEC [m] 0 0 ~ Min. Switching capacity at V IEC [kv] ~ ~ Load Carrying Capacity per culus Rated voltage C [V] Continuous rating 40ºC [] Switching capacity C ~ Rated voltage DC [V] Continuous rating 40ºC [] Switching capacity DC P 600 Q 00 ~ 660V [kv] visit for - ll pricing and shown the most in US up dollars to date - information FY9 SSN208

23 C9 Contactors - Contact Life Life-Load Curves -Pole Contactors Electrical Durability 0 Electrical durability for C- utilization category - U e 690V ➊ Switching non-inductive or slightly inductive loads. The breaking current I c for C- is equal to the rated operational current of the load. C9-6 C9-46 C9-90 C9-20 C9-26 C9-0 C9-70 C9-400 C9-460 C9-80 C9-70 C9 Contactors Millions of Operations Breaking current I c [] Instructions on How to read Life Curves can be found on page 92. ➊ C9-860 and C9-060 electrical durability at the rated current is 0,000 operating cycles. SSN208 visit for - ll pricing and shown the most in US up dollars to date - information FY9

24 C9 Contactors - Contact Life C9 Contactors Life-Load Curves -Pole Contactors Electrical Durability 0 Electrical durability for C- utilization category - U e 440V ➊ Switching cage motors: starting and switching off running motors. The breaking current I c for C- is equal to the rated operational current I e (I e = motor full load current). C9-6 C9-90 C9-20 C9-26 C9-0 C9-70 C9-46 C9-400 C9-460 C9-80 C9-70 Millions of Operations Breaking current I c [] Electrical durability for C- utilization category - 440V < U e 6900V ➊ Switching cage motors: starting and switching off running motors. The breaking current I c for C- is equal to the rated operational current I e (I e = motor full load current). 0 C9-6 C9-46 C9-90 C9-20 C9-26 C9-0 C9-70 C9-400 C9-460 C9-80 C9-70 Millions of Operations Breaking current I c [] ➊ C9-860 and C9-060 electrical durability at the rated current is 0,000 operating cycles. 2 visit for - ll pricing and shown the most in US up dollars to date - information FY9 SSN208