NL/PM /2 digit DC Voltmeter. NL/PM /2 digit DC Voltmeter E Power. Large 0.4" digits. Order Example: NL/X37/L/-/20V

Transcription

1 N Panel Meters IIT MINITU PN PM % asic ccuracy mall tackable ase ed, reen or ellow isplay Presettable ecimal Point MUX Outputs Temperature: 0-50 operating ase ize: 3.125"W x 1.375"H x 3.375" To Order Insert Number ode for ach etter to elect atalog Number. Order xample: N/PM349////5/20V F eading Model N/PM /2 digit Voltmeter Internal current shunt (specify range) N/PM /2 digit Voltmeter reading (PM352 only) N/PM /2 digit Voltmeter Power islay Option 0.3" digit height 5 5V ±5%, 200m arge 0.4" digits 120 with 120V adapter isplay olor 240 with 240V adapter ed F ange in ellow 200mV 100MΩ (PM349 only) reen 2V 1000MΩ 20V 1MΩ 20V 10MΩ 1000V 10MΩ HOT PTH VOT 35 X37 Only 1 /2" behind panel 0.56" or 0.6" 0.1% or 0.2% ccuracy Presettable ecimal Point Power: 5V ±5%, 200m (6m for X37) Temperature: 0-50 operating ase ize: 4"W x 1.9"H x 1.1" 1/8 IN PN M % or 0.2% ccuracy mps,, Ω, atio Options Power upply Options MUX Outputs Temperature: 0-50 operating ase ize: 4.0"W x 1.9"H x 4.5" Model N/X32 3 digit, (unipolar) N/X /2 digit, (bipolar) N/X37 3 digit, (bipolar) islay Option acklit tandard or isplay olor ed ellow reen To Order Insert Number ode for ach etter to elect atalog Number. Order xample: N/X37//-/20V To Order Insert Number ode for ach etter to elect atalog Number. Order xample: N/M350/T/-///120/20V F Model N/M /2 digit, 0.56" N/M /2 digit, 0.6" N/M /2 digit, 0.56" N/M /2 digit, 0.4" onnector (mating connector included) T Terminal block dge connector islay Option tandard 0.8" (M350 only) isplay olor ed ellow reeen eading Internal current shunt (specify range) ange X32 X34, X37 in 100mV 200mV 100MΩ 1V 2V 1MΩ 10V 20V 1MΩ 100V 200V 1MΩ 1000V 1000V 4MΩ eading Internal current shunt (specify range) reading Ohm Ohms reading F Power 5 5V ±5%, 200m 12 12V 24 24V 28 28V V isolated V V ange in 200mV 100MΩ (M3xx only) 2V 1000MΩ 20V 1MΩ 20V 10MΩ 1000V 10MΩ

2 Martel igital Panel Meters 900 eries 700 eries or acklit arge 0.75 igit Height ±200mV / IP67/NM 4X ezel Option PM950 PM959 1 /2" (or 2 x 1 /4") igit Height acklight ±200mV / IP67/NM 4X ezel Option^ PM750 PM702 imensions: 2.99" x 1.73 x 0.51" (76.0 x 44.0 x 15.0mm) Panel ut-out: 2.83" x 1.57 (72.0 x 40.0mm) Operating Temp: 0 to 50 acklight: 50m@5V (except PM942) Model Function ccuracy ±1d upply V PM950 V* ±0.05% PM950 V* ±0.05% PM595 V* ±0.05% PM m ±0.05% loop pwr PM970 V* 0.5% TM910 / F (Pt100 T) TM995 (Type K T) 1% *pecify input range or internal shunt for current measurement. 35/65 eries - imensions: 2.57" x 1.39 x 1.36" (65.2 x 35.2 x 32.0mm) - Panel ut-out: 2.38" x 1.20 (60.5 x 30.5mm) 702 imensions: 2.54" x 1.36 x 0.45" (64.5 x 34.5 x 11.5mm) 702 Panel ut-out: 2.44" x 1.26 (62.0 x 32.0mm) Operating Temp: 0 to 50 acklight: 30m@5V (except PM702) Model Function ccuracy ±1d upply V PM750- V* ±0.1% 3-15 PM702 V* ±0.05% PM m ±0.1% loop pwr *pecify input range or internal shunt for current measurement. ^IP67 bezel not available on PM702 IIT ed, reen or Voltage or Process Inputs isplay Hold 5V power 35x imensions: 2.57" x 1.10 x 0.77" (64.0 x 28.0 x 16.8mm) 35x Panel ut-out: 2.05" x 0.81 (52.1 x 20.6mm) 35x : Window or bezel 65x imensions: 2.3" x 1.1 x 0.71" (59 x 29 x 18.1mm) 65x Panel ut-out: 2.22" x 1.04 (56.5 x 26.5mm) 65x : nap-in bezel igit Height: 0.56", 0.39" ±0.05% ±1d typ. Operating Temp: 0 to 50 Power: 5V ±5% PM35 PM35 PM65 PM65 35X ed PM, differential input reen PM, differential input PM, differential input PM, single-ended input M32 eries 0.31" igit Height Metal ezel Mounts in 32.5mm (1.28") utout IP67/NM 4X Front M32 imensions: 1.5" dia x 0.93" (38.0 x 23.5mm) excluding pins ±0.1% ±1d typ. ±200mV * Operating Temp: 0 to 50 Power: 5V (50m for ) M32-1 ircular PM M32-1- ircular PM *pecify other ranges or internal shunt for current measurement. 36

3 Martel Quick Mount Panel Meters QM130M Wiper Type 9 egment olor cale QM100V40 2-Wire Voltage Monitoring ystem Voltage Powered from Measured ignal everse Polarity Protected QM140V Voltage/urrent 200 mv Full cale uto-zero, uto-polarity Optional anging oard QM120 lapsed Time and Hour anges eset & Trip/Total Inputs Pulse Output every 100 Hours IIT esolution: upply: 0-1 V 125 mv m Max: V 0.4V ± 1 count 50 3 m anges: 200mV, 2V, 20V, 200µa, 2ma, 20ma, 200ma 0.05% ± 1 count upply: µ upply: µ QM110T Temperature eadout in egrees or F eads Internal ensor or xternal 10kΩ NT Thermistor Internal ensor xternal ensor ange: -10 to to to to +428 F esolution: upply 4-28 V 4-28 V FO ample ate: 3 sec. haracter Height: 0.5" (12.5mm) except 0.35"(9mm) on QM120 Operating Temperature: 0-50 imensions (W x H): 1.71" x 0.84" (43.0 x 21.4 mm) : 7/32" (5.5 mm) hole ealing: IP65 Front okogawa oop Powered Indicators xplosion-proof NM 4X ase nalog and igital Models FM and pproved Versions Wall Mount or 2" Pipe Mount M Input esistance: tandard cale: Operating Temperature: lectrical lassification: ase and over: lectrical onnection: 100Ω (M 4-20m) < 6.5Ω (M 4-20m) < 13.5Ω (M 10-50m) ~4kΩ ~ (M 1-5V) % (M) 0-100% (M) ±0.05% of full scale [1999] ±1 digit (M) ±1.5% of full scale (M) 0 to 60 (M), -20 to 60 (M) FM,, XPOIONPOOF 1, IV1, P,,,, UT-INITIONPOOF II / III, P,F, ie cast aluminum, baked polyurethane paint. ark green; NM 4X 1 /2" NPT For special analog scale, add / to catalog number and describe (i.e PI). For special digital readout, add /N to catalog number and describe (i.e PM). xample: M-2/FF1/WHT Model M oop Indicator (nalog) M oop Indicator (igital) Input ignal - 4 to 20 m - 10 to 50 m (M only) - 1 to 5 V (M only) 1 2" Horizontal Pipe 2 2" Vertical Pipe (or wall mount) lectrical lass /FF1 FM xplosion Proof /F1 xplosion Proof Options / WHT White scale or face plate /N ngineering Unit alibration (M Only) / cale in ngineering Units (M Only) / T tainless teel Tag -Up to 8 haracters 37

4 ondon lectronics oop Powered Meters Powered ntirely from the Input ignal High ontrast isplay lear Visibility in irect unlight 1/8 IN ase etachable crew Terminal onnectors Wide anging ero and pan ontrol electable ecimal Point ocation imple to Install ow ost X10 and X100 dd-on eros (Jumper electable) Input anges: 2-wire connection, 4 m 20 m, 125Ω 10 m 50 m, 50Ω, 1 m 5 m isplay Type: 7-segment, HI- isplay Height: 12.7 mm 0.50" ecimal Points: electable internally Power Voltage: ine drop <2.5V Power onsumption: 100 mw maximum M: 65 d, to 450 Hz ize: 1/8 IN panel area and cutout Weight: 150 grams typically ase Material: 94V 0 U polycarbonate Operating Temperature: -10 to 50 torage Temperature: -40 to 85 elative Humidity: Non-condensing 90% 40 PO 88-PO The 88-PO is a low-cost, 3 1 /2-digit, scalable, process input indicator. It has an easy-to-read display and detachable screw terminals. The basic 3 1 /2-digit offers 0 to 1,999 display range. This can be extended to 0 to 199,900 with both add-on zeroes enabled. 88-PO igit oop Powered Meter Monarch Panel Tachometers and Totalizer T eries Universal Input from Optical, Infrared, Proximity and Magnetic ensors irect TT and 200 mv to 50 V Input ignals election of ensors For ll nvironments The T tachometers offer a simple PM display or can be interfaced with data acquisition systems in your control room. The T-1/115 operates from a single pulse per revolution. T-3/115 is front panel programmable for single or multiple pulses per revolution and for scaling. The T-3 is supplied with NIT TIFIT and has 2 alarm set points, offset analog voltage, current, TT pulse and -232 outputs and offers a counter (totalizer) mode. T-1 T-1/115 T-3/115 peed ange 5 to 100,000 PM 5 to 999,99 PM ccuracy 1 PM.001%,.0001 to 10 PM isplay.56" H red.56" H red Totalizer N/ 1-99,999 larm apability N/ Two alarm set points. Front panel programmable as high or low. nalog Outputs N/ Voltage(0 5 V), urrent (4 20 m) Pulse epeater N/ Pulse Output,0 5V TT compatible imensions 1/8 IN by 4.5" deep 1/8 IN by 7" deep. ompatible speed sensors on page 118 T-3/115 Tach/Totalizer T-1/115 Tach (1 Pulse/ev) 37a

5 ondon lectronics arge isplay Meters Fusion nalog & igital Inputs arge, right igits etup Without Menus Indoor & Outdoor Models hoice of Position asy eader xample: Fusion2-F2-4N-P Process 0-10V, ±13V, 4-20m, ±24m erial 232 or 485 esistance: 1MΩ on V, 33Ω on m baud xcitation 24V 60m isplay: to 9999 (4d) Temperature Type J, K, T,,, 3 or 4 wire PT100 T to (6d) ±0.05% of range ounter 4 channels nalog Out: >1kΩ 16 bit resolution ignal Type: ogic level; tach; NPN, PNP pulses <24V; 100mV inductive pickup; ontact closure elays: direct or inverse 250V isolation PT 2@250V resistive electable NO or N ange: 0-40kHz electable energize or deenergize xcitation: 24V 60m Temperature: 0-50 operating oadcell 4 or 6 wire onnectors: detachable screw terminals esistance: >10MΩ Power: 50V max. xcitation 10V 120m ase: lack upv, 75mm depth Fusion2 - F H I - 0 igit Height F2 2" (57mm) F4 4" (102mm) F6 6" (150mm) F8 8" (200mm) F12 12" (300mm) F16 16" (400mm) igit Format 4N 4 digit numeric 4 4 digit clock 6N 6 digit numeric 6 6 digit clock 8N 8 digit numeric Function ounter H lock/timer oadcell M Millivolt P Process slave slave T Temperature nalog Output NI 4-20m NV 0-10V N ±10V F H I larm Outputs 2 2 alarms 4 4 alarms PO 2 PT relays 2 solid state relays erial Output isplay olor ed reen ellow lue W White V ed bright V reen bright V ellow bright V lue bright upply V 50/60Hz 11-30V 1 Panel, IP65 front 2 Wall, IP65 3 Top uspension, IP65 4 Wall, IP54 5 Top uspension, IP54 6 ear uspension IP54 simple and affordable way to see and share important measurements over large distances: 2" (57mm) digits for viewing up to 65ft (20m) 4" (102mm) digits for viewing up to 130ft (40m) vailable in 5 input types, these meters can be configured from the front panel. Process Input (Type P): 4-20m, 0-10V, 1-5V, scalable ±0.1% range isplay by: 1, 2, 5, 10, 20, 50 ount Input (Type ): NPN, PNP or contact closure ±0.05% range lave Input (Type ): 232, 422, 485 or TT Format: II data from baud ddressing: 00 to FF eset: Front panel or remote contact closure xcitation: 24V, up to 30m (except lave) Operating 0-50, <95% H non-condensing Temperature: Power: V, 11-30V imensions: x5.8x1.8" (260x140x45mm) x7.7x1.8" (415x195x45mm) ealing: IP54 dust tight (IP65 optional) To Order Insert ode for ach etter to elect atalog Number. xample 4P-2-O-O igit ize 2 2" 4 4" Type P Process Input ount/rate Input lave (II) H HH:MM lock T T & PT100 T 1 Flush Panel 2 Wall 3 uspension 6 Top of abinet Power V 11-30V rightness 0 Normal V Ultrabright 38 IIT