Machine Starters Kit

Transcription

1 Machine Starters Kit Spitfire 65/90 Extreme Dear Customer, Thank you for buying a Mutoh Spitfire 65/90 Extreme series Printer. This kit contains some tools to make your printer operative. Please refer to the diagram below to know what s in the box. Refer to the next pages to know how to install or how to use these parts. AP Rev 1.1 Page 1/11

2 CONTENTS TABLE 1. USER INFORMATION User s Guide Quick Start Manual DVD Get started DVD LABELS INK STARTER SET USER S MAINTENANCE KIT (KY-80229) Maintenance Overview AP Rev 1.1 Page 2/11

3 1. USER INFORMATION 1.1. User s Guide In the User s Guide, everything regarding installation, handling and working with the printer is described Quick Start Manual This little booklet contains a CD inside. On this CD all manuals of all Mutoh machines have been collected DVD 2.1. Get started DVD With this DVD you will be able to make a first test print on Mutoh s ONE-IN-ALL vinyl. The procedure to make such a test print consists out of the following steps: Step 1 : Step 2 : Step 3 : Step 4 : Insert the DVD, the DVD will start up automatically Once the DVD is started, press Step 1: Load the ONE-IN-ALL vinyl as described in the User Guide. This step explains you how to load your media. Once the media is loaded properly, press Step 2 : Print and evaluate the distance adjust files. This will explain you what steps should be taken to make a proper distance adjust. A good distance adjustment delivers the best printing quality. After the distance adjust has been made, press step 3: print the test file Here you have the possibility to print the test files in two ways. Either you choose to print a Pre- ripped file or you choose to print it via Onyx. If you choose to print the Pre-ripped file, press this button and choose the correct printer. Once you have chosen the correct printer, the file will automatically been printed. If you choose to print via Onyx, press the button and follow the procedure. AP Rev 1.1 Page 3/11

4 3. LABELS Please follow the instructions below to attach the labels on the correct place. MACHINE LABEL CLEAN THE COVER WITH ISOPROPANOL BEFORE ATTACHING THE LABEL. BE SURE TO ATTACH THE LABEL ACCORDING TO THE DIMENSIONS BELOW. KEYBOARD LABEL ATTACH THE LABEL DIRECTLY HEATER LABEL STICK THE HEATER LABEL NEXT TO THE CAUTION LABEL ON THE FRONT COVER. CLEAN THE COVER WITH ISOPROPANOL BEFORE ATTACHING THE LABEL. AP Rev 1.1 Page 4/11

5 MAINTENANCE LABEL (SET) THIS LABEL IS AVAILABLE IN 6 LANGUAGES. CHOOSE ONE AND CLICK IT IN THE FRONTCOVER. YOU MAY REMOVE THE BACKING BUT IT IS NOT NECESSARY. HARMFUL LABEL STICK THE HARMFUL LABEL BETWEEN THE GOGGLE AND GLOVE LABEL ON THE WASTE LIQUID TANK. FIRST REMOVE GREASE WITH ISOPROPANOL. AP Rev 1.1 Page 5/11

6 4. INK STARTER SET Use this kit (3 boxes with 8 cassettes each) to perform a first ink load. BOX 1 BOX 2 BOX 3 Spitfire Setup Cleaning First Wash (8 cassettes) Spitfire Mild Solvent Cleaning Second Wash (8 cassettes) Spitfire Mild Solvent Ink Set (8 cassettes) RJ80U-22-CLN RJ80MS-22-CLN RJ80MS-22-BK RJ80MS-22-CY RJ80MS-22-MA RJ80MS-22-YE RJ80MS-22-LC RJ80MS-22-LM RJ80MS-22-STO Black Cyan Magenta Yellow Light Cyan Light Magenta Stabilizer Liquid SPF8MS Ink Starter Set (2x4 configuration) SPF6MS Ink Starter Set (1x6 ink configuration) Please follow the procedure below to perform the first ink load. Caution Be careful that ink does not get into your eyes or on your skin. When ink has become in contact with your eyes, immediately flush with water. When ink has become in contact with your skin, immediately wash your skin with soap. If you feel discomfort after a contact with the ink, consult a doctor immediately. Do not disassemble ink cassettes, ink may get into your eyes or on your skin. Only use Spitfire Mild Solvent ink and appropriate Spitfire cleaning liquid. Caution Before powering ON the unit, make sure to: Remove the dummy cassettes. Remove the waste tube clamps. Remove the bag enclosing the waste tubes. Connect the waste tubes. Verify if you have all ink and cleaning cassettes needed. See parts needed. Caution When powering ON the unit for the first time, a cleaning cycle automatically starts. Please follow the instructions mentioned on the display. Caution Be sure that there is always an ink or cleaning cassettes in every slot of the printer. Immediately install the ink cassettes after unpacking them, to prevent incorrect printing or poor print results. Use ink cassettes within two years from the date printed on the cassette packages. Replace the ink cassettes after six months from installation date. AP Rev 1.1 Page 6/11

7 Parts needed: Before powering ON the unit for the first time, please be sure to have: 8 Spitfire Setup Cleaning cassettes 8 Spitfire Cleaning liquid cassettes 8 Spitfire Mild Solvent ink cassettes (2 x CMYK) When using a 2x4 colour configuration 8 Spitfire Setup Cleaning cassettes 8 Spitfire Cleaning liquid cassettes 6 Spitfire Mild Solvent ink cassettes (CMYKLcLm) 2 Mild Solvent Stabilizer liquid cassettes When using a 1x6 colour configuration First ink load procedure: Step 1 : Power ON the unit. Step 2 : Remove dummy cassettes when following message is displayed: Step 3 : Please wait while printer is sucking air Step 4 : Insert 8 NEW cassettes with Mutoh Setup Cleaning when following message is displayed. Step 5 : Please wait Step 6 : Moisten CAPS with Mutoh Cleaning Liquid for a good suction when asked. The carriage will automatically move to the left side of the machine. AP Rev 1.1 Page 7/11

8 Step 7 : The printer will automatically start pumping cleaning when all cassettes are inserted. Step 8 : Empty the waste bottle when asked and confirm later on with ENTER. Step 9 : Remove the 8 cassettes with Mutoh Setup Cleaning when following message is displayed. Step 10 : Insert 8 NEW cassettes with Mutoh Mild Solvent Cleaning when following message is displayed Step 11 : The printer will automatically start pumping cleaning when all cassettes are inserted. Step 12 : Empty the waste bottle when asked and confirm later on with ENTER. AP Rev 1.1 Page 8/11

9 Step 13 : Remove the 8 cassettes with Mutoh Mild Solvent Cleaning when following message is displayed Step 14 : Insert 8 NEW cassettes with Mutoh Mild Solvent Ink in the correct order when following message is displayed. 2 x 4 Colour configuration: 1 x 6 Colour configuration: Caution Install Mild Solvent Stabilizer liquid cassettes in slot 3 and 4 when using the 1 x 6 colour ink configuration. See image below. Step 15 : The printer will automatically start pumping cleaning when all cassettes are inserted. Step 16 : Empty the waste bottle when asked and confirm later on with ENTER. Step 17 : The first ink load procedure has been finished successfully. Notes This product has been tuned for the use of Spitfire Mild Solvent Ink cassettes. If other manufacturers products are used, drawing results may become faint or ink ends are not properly detected, and the warranty will not cover (repairs will require a fee) any resultant breakdown. AP Rev 1.1 Page 9/11

10 5. USER S MAINTENANCE KIT (KY-80229) To ensure stable quality and to prevent that some parts get broken or become congested, the importance to perform the daily, weekly and monthly maintenance is very high. The user s maintenance kit contains following items: 1 Absorbent Plate 6 2 Wipers 24 3 Spitting Box Pads 12 4 Cleaning Liquid 250 ml 3 5 Wiper Arm Assembly 1 6 Good Shape Kit (KY-80228) 1 1 Gloves Pipettes 60 3 Swabs Polynit Wipers 300 AP Rev 1.1 Page 10/11

11 5.1. Maintenance Overview This section describes the periodical services required for this machine. The periodical services ensure stable print out quality of the machine. In the periodical services, some service parts may be checked, cleaned, or replaced. Perform periodical inspections according to the table below. N Action Frequency 1 Clean wipers 2 Flush caps in maintenance station 3 Clean the edges of the caps in maintenance station 4 Clean the area around the caps 5 Clean around bottom of the heads 6 Change the wipers 7 Change upper sponge at back of the capping station Daily maintenance Weekly maintenance Monthly maintenance 8 Replacing the sponge in the spitting box 2 weekly maintenance 9 Replacing the wiper arm assembly once Notes All cleaning in Ink areas must be done with Mutoh spitfire cleaning solution. Above maintenance cycle is based on use: 8 hours / day, 5 days / week and 44 weeks / year. If the machine is used more often, maintenance periods will come earlier. Important IN-THE-BOX OF THE KIT, A DOCUMENT IS ENCLOSED WHICH WILL GUIDE YOU THROUGH THE DAILY, WEEKLY AND MONTHLY MAINTENANCE WHICH IS NEEDED FOR THE SPITFIRE 65 AND 90 EXTREME. AP Rev 1.1 Page 11/11