PART-I Hardware Technical Specifications (Minimum) PCs with Intel Processor

Size: px

Start display at page:

Download "PART-I Hardware Technical Specifications (Minimum) PCs with Intel Processor"

Veronica Carter
6 years ago
Views:

1 PART-I Hardware Technical Specifications (Minimum) PCs with Intel Processor Annexure-C S.n. Component Description Offered Devia Y/N tions if any 1. Make/Model The Vendor should quote for only one model. 2. Warrantee Specify the period of warrantee offered by OEM - 3. CPU Intel Core I3-550 Processor Or Higher 4. Memory 4 GB DDR MHz DIMM 5. Motherboard Intel H 55 chipset OR Higher 6. Monitor 0.28 mm dot pitch, non-interlaced, low radiation, anti-glare and anti-static screen, 17" or better TFT, 256 colour monitor capable of minimum 1366*768 resolution in non-interlaced mode, with ISO-9241, TCO-03, CE mark. Plug and Play and Microsoft Windows 7 compatible. 7. Speakers Built in Speakers 8. Display Integrated Intel High Graphics Controller Controller, capable of at least 256*1366*768 resolution in non-interlaced mode 9. Hard Disk 500 GB or more 7200 rpm SATA II Drive (3Gb/s) Drive with pre-failure alert with 8MB Cache Buffer 10. DVD Drive 22X DVD writer (Read & Write) 11. Ports 6 USB ports (2 in front panel), 1 serial port, one parallel port, 1 RJ-45, 1 Graphics, 1 VGA, Keyboard & mouse ports, Plug and Play support 12. Keyboard 114 Keys or more Multimedia Keyboard needs to pass a life test of Standard key with 10 millions cycles under normal operation.(5times/second,120gf), and Hot key is 500 thousand cycles under normal operation.(5 times/second,160gf), after life test return force no less than 10grams. 13. Mouse Two button USB optical scroll mouse from OEM, MS-Windows compliant, with good quality mouse pad 14. Ethernet Microsoft certified, 32 bit, PCI Interface 10/100/1000 Mbps auto-sensing Gigabit Ethernet adapter having UTP (RJ-45) interface, Wake-on-LAN enabled. Should conform to IEEE standards and should be CE Mark Compliant. Page 1 of 6

2 15. Operating Windows 7 (Professional) System Preloaded with recovery CD media (With latest service pack). The exact desktop model quoted by the vendor Should be Windows 7 (Professional) certified and not the desktop brand. (With IE 8) DM 16. Manageability Should be I 2.0 compliant. Manageability features like Asset tracking (BIOS, HDD, Memory, O/S Information, BIOS, Serial number, Model and Manufacturer), Pre-failure alert etc. There should be (bundled) software tools to optimize system configuration and software installation. There should be tools for diagnosing system faults and minimizing downtime of the node. 17. Cabinet Mini Tower Cabinet. Minimum 4 bays, Housing 2* front accessible 3.5 bays, 2*front accessible 5.25 bays & recommended cooling arrangement. 18. Power Supply Energy Star 5 Compliant, CE Mark compliant, surge tolerant SMPS and subject to successful demonstration of the PC's functionality during inspection / evaluation, including the feature that the offered Wattage of the Power Supply shall be able to take the load of an additional Peripheral on the Serial Port of the PC. 19. Certifications ISO 9002, ISO 14001, DMI 2.0, Microsoft 7 Professional Certified 20. Compliance DMI 2.0 Compliance PCI ACPI and Green Peace rating of 4.2 or above Mandator y Page 2 of 6

3 Hardware Technical Specifications (Minimum) Thin Clients S.n. Component Description Offered Deviations Y/N if any 1. Make/Model The Vendor should quote for only one model. Make Model 2. Warrantee Specify the period of warrantee offered by OEM 3. CPU Latest Intel 1.8 GHZ Processor compatible with MS windows OS 4. Memory 2 GB DDR2 667 MHz DIMM expandable to 4 GB. Minimum 2 DIMM slots, 1 GB STAT FLASH upgradable to 2 GB 5. Motherboard Latest Intel chipset 6. Monitor 0.28 mm dot pitch, non-interlaced, low radiation, anti-glare and anti-static screen,17" or better TFT, 256 colour monitor capable of minimum 1366*768 resolution in non-interlaced mode, with ISO-9241, TCO-03, CE mark. Plug and Play and Microsoft Windows7 compatible. 7. Display Integrated Graphics Controller, capable Controller of at least 256*1366*768 resolution in non-interlaced mode 8. Ports 6 USB ports (2 in front panel), 1 serial port, one parallel port, 1 RJ-45, 1 Graphics, 1 VGA, Keyboard & mouse ports, Plug and Play support 9. Keyboard 104-Key, heavy duty, tactile, MS Windows compliant USB Keyboard from OEM. Key life of at least 20 Million operations 10. Mouse Two button USB optical scroll mouse from OEM, MS-Windows compliant, with good quality mouse pad 11. Ethernet Microsoftcertified,32bit,PCI Interface 10/100/1000 Mbps auto-sensing Gigabit Ethernet adapter having UTP (RJ-45) interface, Wake-on-LAN enabled. Should conform to IEEE standards and should be CE Mark Compliant. 12. Operating Windows 7 Embedded Standard System 2009 down gradable to windows XP (Professional) The exact model quoted by the vendor should be windows certified. 13. Certifications ISO 9002, ISO 14001, DMI 2.0, Microsoft 7 Professional Certified 14. Compliance DMI 2.0 Compliance, PCI, ACPI and Green Peace rating of 4.2 or above - Mandatory Page 3 of 6

4 Part II TECHNICAL SPECIFICATIONS (Minimum) FOR PERIPHERALS AND ACCESSORIES Description 136 Column Dot Matrix Printer High Speed Dot Matrix Printer Specification 24 pins, Draft and LQ, Minimum 136 column, Impact Dot Matrix Printer, Min 10 CPI high speed draft, Min cpi normal draft, Min 12 CPI LQ mode, Minimum 200 million strokes/wire or dots/pin or equivalent, Both Parallel and Serial, simultaneously active interfaces. Input Buffer 64 KB Draft 340 Pages per hour LQ-200 Pages per hour Work Load 1500 per day PAPER HANDLING Paper Paths Fanfold Front Push Tractor Optional Rear Push Tractor Cut Sheet Front Manual Insertion (front or rear ejection is selectable) Cut Sheet Feeder (option) Detection Function Paper Jam, Paper Skew, Paper Width PAPER SPECIFICATIONS: 10*12 / 15/12 sizes also(both cut sheet & continuous papers) Paper Width Fanfold : mm-381 mm Cut sheet : 182 mm-430 mm (manual) 182 mm-420 mm (CSF) Book size : A4, A5, A6 & 140x105 mm (manual mode) Paper Thickness Fanfold : 0.52 mm max. Cut sheet : 2.0 mm max. (manual) 0.12 mm max. (CSF) Card : 2 mm max (manual mode) Book : 1.3 mm max (manual mode) MULTI-PART FORM Original plus 6 duplicates (dark mode) Original plus 4 duplicates (normal mode) BUILT-IN FUNCTIONS Auto load/ejection Short tear off Top of form setting Paper parking Online micro adjust Buffer clear Font/pitch lock Plug 'N' Play for Windows Win 9X, NT, 2000 drivers HEAD GAP Auto adjustment with provision for manual ADJUSTMENT adjustment using slide-through lever INPUT BUFFER 64 KB INTERFACES Standard Parallel, (bi-directional; IEEE 1284, nibble mode) & Serial (RS-232C) AutoShare EMULATION EPSON LQ-2550 and IBM 2391 RELIABILITY MTBF 10,000 hrs Life of printhead 300 million characters (draft mode) RIBBON CARTRIDGE Colour Black Life 15 million characters (draft mode) ENVIRONMENTAL CONDITIONS Operating Temperature 5 C to 40 C (41 to 104 F) Operating Humidity 20% - 80% (no condensation) ELECTRICAL SPECIFICATIONS Power Supply AC V Frequency Hz Power Consumption Draft Self watts Stand-by - 45 watts Energystar - 15 watts PHYSICAL CHARACTERISTICS Dimensions 635 mm(w) x 465 mm(d) x 294 mm(h) Page 4 of 6

5 No Component Description 1.0 Pass Book Printer PR 2 Plus Olivetti Passbook Printer, 24 pin Dot matrix, 240x360 DPI, Print Speed at 10 CPI, Ribbon Cartridge capacity at up to 10 million character, Noise level less than 58 db., Print Head Life : 400 million strokes/wire 2.0 Scanner Windows XP and above versions complaint Flatbed Scanner, Scan size 216 x 311 mm, scan speed 8 sec, Min scanning resolution 4800 x 9600 dpi, 96 bit, capable of scanning paper (plain, inkjet, photo, banner), envelopes, labels, cards, 35 mm slides and negatives. Should support scan file formats of bmp, jpeg, tiff, tiff compressed, png, pcx, flashpix, pdf, rtf, htm, txt etc. USB 2.0 connectivity column Dot 136 Column, 24 PIN DMP, Bidirectional print head, Minimum Matrix Printer print speed of 400 cps (High Speed draft) and minimum 100CPS (LQ) at 10 cpi draft mode, minimum print head life of 300 million characters, input buffer 64 kb 4.0 Cash Receipt 9 pin, Impact printer with 3.0 inch paper width and 2 inch Printer 40column Dot Matrix Printer printing width. 4 lines per sec with features of 24 characters in normal mode and 40 characters in compressed mode having USB Interface. Should have short tear off using metal cutters. Should support standard emulations like EPSONS, IBM,etc and should be compatible with Banks software- finacle in thin client PCs and Desktop PCs for Printing of Cash Receipts at our branches. Vendor to demonstrate tear away position in Banks software 5.0 Laser-jet Printer Upto 15 ppm, 600x600 dpi, 234 mhz processor, 2mb ram, printing (with out language pcl6 & ps3, Interface usb2.0, parallel port & 10/100 tx, Network Card) including USB Cable for connectivity with Systems. Type I Monthly duty cycle upto 3000 pages., Hi-Speed USB 2.0, Compatible Operating System: Windows 2000/XP(32/64bits)/Vista(32/64bits)/2003/window 2007/ Server(32/64bits) Various Linux OS: - Red Hat 8~9, - Fedora Core 1~4 - Mandrake 9.2~ SuSE 8.2~9.2 Mac OS 8.6~9.2, 10.1~10.4 The bidders are requested to carefully note the following: 1) Please enclose detailed original product brochures, catalogues, technical literature, system/reference manuals, instruction booklets and all supporting documentation (in English language) specific to the make/model(s) of the equipment or details of the model and make of the PC displayed on your website. Please note that Bid not containing product brochures, manuals may be treated non-responsive. 2) Please bring out explicitly any deviation from the specifications in the products offered. Important Notes:- Depending on costs/requirement, the Bank reserves the right to choose any configuration or model, Bank s choice will be final and binding on the bidders All items/components should be separately and clearly mentioned. Detailed cost breakup should be furnished in the Price Schedule as per the format prescribed. Technical specifications of the equipment offered (against the requirements specified) as well as the Technical Details (in the prescribed format) should be furnished along with the Bid, for all the items offered. Otherwise the offer would be treated as Nonresponsive. Detailed product brochures, catalogues, technical literature, system/reference manuals, instruction booklets and all supporting documentation (in the English language) specific to the make/model(s) of the equipment offered should be submitted along with the offer. Otherwise the offer would be treated as Non-responsive. Page 5 of 6

6 Software drivers for DOS (v6.22 or higher), Microsoft-XP Professional, Microsoft Windows 98, Microsoft Windows NT (v4.x), Microsoft Windows 2000 and Novell IntranetWare (v4.20) with and without SFT-II should be supplied for Mother Board, SCSI Controllers, IDE/EIDE Controller, Display Controller, Ethernet Interface, CD-ROM, DAT Drive, ZIP Drive, etc. Hard copies (in original) of as many product brochures, catalogues, technical literature, system/reference manuals, instruction booklets, supporting documentation, installation and user manuals for all the components like Mother Board, SCSI Controllers, Disk Drives, IDE/EIDE Controller, Display Controller, Ethernet Interface, CD-ROM, DAT Drive, ZIP Drive, etc. Monitor, Keyboard, etc., - as the number of units being indented as per the Schedule of requirements, should be included in the offer. All software supplied should be legal and licensed and supplied on standard CD-ROM media, with user documentation (English language versions). Any deviation from the above specifications in the offered products should be separately brought out explicitly, in the column provided therefore. Software drivers for Microsoft-XP Professional, Microsoft Win 2Kserver/ Professional and all components like Mother Board, Disk Drives, IDE/EIDE Controller, Display Controller, Ethernet Interface, CD-ROM, etc. Monitor, Keyboard, etc., would be made available at all the locations with the systems at the time of delivery of equipments. Hard copies (in original) of as many product brochures, catalogues, technical literature, system/reference manuals, instruction booklets, supporting documentation, installation and user manuals for all the components like Mother Board, Disk Drives, IDE/EIDE Controller, Display Controller, Ethernet Interface, CD-ROM, etc. Monitor, Keyboard, etc., - should be included in the offer. All software supplied should be legal and licensed and supplied on standard CD-ROM media, with user documentation (English language versions). Page 6 of 6

PART - IV: BROAD SPECIFICATIONS OF HARDWARE / PERIPHERALS AND SOFTWARE

PART - IV: BROAD SPECIFICATIONS OF HARDWARE / PERIPHERALS AND SOFTWARE Desktop A. Configuration of Desktop with Intel Processor: Sr. No. Component Minimum Requirement Your Offer 1 Make Must be specified