SOLID END MILLS L1 - L16. See our large selection of solid end mills in our Solid Round Tools Catalog L2 - L4 TOOL SELECTION GUIDE L5 - L9

Size: px

Start display at page:

Download "SOLID END MILLS L1 - L16. See our large selection of solid end mills in our Solid Round Tools Catalog L2 - L4 TOOL SELECTION GUIDE L5 - L9"

Flora Hardy
5 years ago
Views:

SOID ND IS 1-16 OO SION UID 2-4 IION ND SION SOID ND I IDNIIION SYS / ION OSSY S SUDIS 2 2 4 SU INIS OIND SQU SQU (O UOI S) SW 5-9 5 9 I

1 SOID ND IS 1-16 OO SION UID 2-4 IION ND SION SOID ND I IDNIIION SYS / ION OSSY S SUDIS SU INIS OIND SQU SQU (O UOI S) SW I IINY I VUION UI-UNION I IINY 3ZK ONDD UIN ONDIIONS See our large selection of solid end mills in our Solid ound ools atalog 1

~Ø16. 2 Ø1.~Ø16. 6 2S 2 Ø1.~Ø16. 7 8 9 11 igh efficiency chip evacuation 4K 4 flutes, tough corner edge 4 Ø3.~Ø16. 2SW 3SW or utomatic athe 3 4SW 4 2 35 Ø3.~Ø13. 3ZKS 3 Ø6.~Ø12.

2 OO SION UID pplication and selection INSS ef. age pplications art Number eatures Shape oating No. of lutes elix ngle Outside Dia. ØDc (mm) U-O OOVIN OIN UNIN N & D 5 Surface finish oriented 2SS 5, 6 2S 2 flutes, sharp corner edge 2 Ø.2~Ø16. 2KS flutes, tough corner edge Ø3.~Ø16. 2K 2 O 4S 4 flutes, sharp corner edge 4 Ø1.~Ø16. 2 Ø1.~Ø S 2 Ø1.~Ø igh efficiency chip evacuation 4K 4 flutes, tough corner edge 4 Ø3.~Ø16. 2SW 3SW or utomatic athe 3 4SW Ø3.~Ø13. 3ZKS 3 Ø6.~Ø12. ulti-functional, high efficiency O 4 3ZK 3 Ø3.~Ø12. Solid ndmill Identification System 2 S XXXXXXXX DIN SOID ND IS No. of lutes pplications elix ngle Series ength of cut Outside Dia. ength of cut Shank Dia. Others Icon lossary : Surface finish oriented Z : ulti-functional, high efficiency : 3-39 : 4-49 S : Square K : ough corner edge S : Short : edium : ong W: or utomatic athe 2 2.mm 6 6.mm 4 4.mm orner adius width etc... IIN he products made from super micro-grain cemented carbide S S NI See our large selection of solid end mills in our Solid ound ools atalog

OO SION UID Substrate of all solid end mills is carbide ef.

Stainless Steel itanium lloys eat-esistant lloys ast Iron

8 2KS 2K 4S 4K UNIN 2SW 9 3SW 4SW OIN 3ZKS 11 3ZK Name of

ecommendation OOVIN Square ype dge Shape with hamfered dge

3 OO SION UID Substrate of all solid end mills is carbide ef. age art Number Steel ardened Steel ~3 ~4 ~55 ~68 aterial Stainless Steel itanium lloys eat-esistant lloys ast Iron luminum & Non-errous etals INSS 5 2SS 5, 6 2S 6 2S N & D 7 8 2KS 2K 4S 4K UNIN 2SW 9 3SW 4SW OIN 3ZKS 11 3ZK Name of parts utting parts shape : 1st ecommendation : 2nd ecommendation OOVIN Square ype dge Shape with hamfered dge U-O DIN Introduction 5~9 SOID ND IS 5~9 IIN S S 1~11 NI

SOID NDI SIS New VD technology, O INSS N & D O for igh recision inishing Wear and high heat resistance O Nitride solid solution metal with a high melting point igh hardness with oxidation resistance

Series 1~14 igh Quality, Sharp dge Smooth surface quality UNIN racture resistance with stable cutting Super icro-grain cemented carbide -Series (S) edge OIN ase Studies ree utting arbon Steel hromium

$3 times longer tool life than ompetitor. Kyocera s new coating technology resolved edge fracturing and provided stability compared with ompetitor.$ Kyocera showed superior finished surface compared with ompetitor. achine parts Vc=328 sfm (n=3,98min -1 ) ap=.177" fz=.2 ipt (Vf=31.

Kyocera showed superior finished surface compared with ompetitor. achine parts Vc=328 sfm (n=3,98min -1 ) ap=.177" fz=.2 ipt (Vf=31.

times the productivity! Kyocera processed twice as many workpieces compared to ompetitor. ompetitor is limited to 35 workpieces due to excessive wear.

4 SOID NDI SIS New VD technology, O INSS N & D O for igh recision inishing Wear and high heat resistance O Nitride solid solution metal with a high melting point igh hardness with oxidation resistance Smooth surface O enables high precision finishing with a sharp cutting edge. Series 1~14 igh Quality, Sharp dge Smooth surface quality UNIN racture resistance with stable cutting Super icro-grain cemented carbide -Series (S) edge OIN ase Studies ree utting arbon Steel hromium Steel OOVIN O parts Vc=289 sfm (n=3,5min -1 ) ap=.197" fz=.91 ipt (Vf=126. ipm) Wet 4S utomotive parts Vc=131 sfm (n=3,2min -1 ) ap=.39" fz=.4 ipt (Vf=2.8 ipm) Wet 2S U-O O 23 pcs/edge O 7 pcs/edge NI S S IIN SOID ND IS DIN ompetitor oated arbide 1 pcs/edge ompetitor oated arbide 35 pcs/edge Kyocera showed 2.3 times longer tool life than ompetitor. Kyocera s new coating technology resolved edge fracturing and provided stability compared with ompetitor. Kyocera showed superior finished surface compared with ompetitor. achine parts Vc=328 sfm (n=3,98min -1 ) ap=.177" fz=.2 ipt (Vf=31.5 ipm) Wet 4 flutes ool life 4 pcs/edge 4SW8-8-8 O (Number of workpiece processed: 23 pcs/ edge) arbon Steel ompetitor oated arbide (Number of workpiece processed: 1 pcs/edge) (ustomer valuation) our times the productivity! Kyocera processed twice as many workpieces compared to ompetitor. ompetitor is limited to 35 workpieces due to excessive wear. Kyocera prevents chipping there by enabling long-life and stabilized machining. achine parts Vc=328 sfm (n=3,2min -1 ) ap x ae=.1378".1181" fz=.2 ipt (Vf=25.2 ipm) Wet 4 flutes 4SW1-8-1 O (Number of workpiece processed: 7 pcs/ edge) ree utting arbon Steel 1.6 times the productivity! ive times the tool life! ompetitor oated arbide (Number of workpiece processed: 35 pcs/edge) (ustomer valuation) 4SW8-8-8 able feed Vf=31.5 ipm 4SW1-8-1 able feed Vf=25.2 ipm ompetitor oated arbide able feed Vf=7.9 ipm ompetitor oated arbide able feed Vf=15.7 ipm [ompetitor oated arbide ] Ø8 4 flutes Vc=27 sfm (n=258min -1 ) ap=.177" ool life 4 pcs/edge fz=.8 ipt (Vf=7.9 ipm) User comments: Was able to increase both cutting speed and table feed rate. Despite the increase in machining conditions, burr formation decreased. [ompetitor oated arbide ] Ø7 4 flutes Vc=144 sfm (n=2min -1 ) ap ae=.1378".1181" fz=.2 ipt (Vf=15.7 ipm) User comments: utomatic general purpose end mills have a shorter edge length with improved rigidity, which enabled an increase from conventional Ø7 to Ø1, thus improving machining conditions. ompared to conventional tools, tool life improved five times. (ustomer valuation) (ustomer valuation)

SU INIS OIND, 2 US, S ON D 2SS, 2S, 2S aterials No. of lutes: 2 : 1st ecommendation INSS N & D 2SS (Short) 2S (edium) UNIN art Number Outside ength Neck Shank Overall No. of Dia. ill Dia. of cut Dia.

5 SU INIS OIND, 2 US, S ON D 2SS, 2S, 2S aterials No. of lutes: 2 : 1st ecommendation INSS N & D 2SS (Short) 2S (edium) UNIN art Number Outside ength Neck Shank Overall No. of Dia. ill Dia. of cut Dia. Dia. length lutes ØDc ØD1 ØDs Z 2SS ß SS ß SS2-3-4 ß SS ß SS ß SS ß SS4-6-6 ß SS ß SS ß SS ß SS6-9-6 ß SS ß SS ß SS ß SS ß SS ß SS ß Sharp utting dge educed urrs art Number Outside ength Neck Shank Overall No. of Dia. ill Dia. of cut Dia. Dia. length lutes ØDc ØD1 ØDs Z 2S2-4-4 ß S3-6-4 ß S4-8-4 ß S5-1-4 ß S ß S ß S ß S9-2-4 ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S2-6-4 ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S3-1-6 ß S ß S ß S ß OIN OOVIN U-O DIN SOID ND IS IIN S S NI ecommended utting onditions 12 Þ : U.S. Standard ß : World xpress (Shipping: 7-1 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 5

6 SU INIS OIND, 2 US, S ON D NI S S IIN SOID ND IS DIN U-O OOVIN OIN UNIN N & D INSS 2S (edium) art Number Outside ength Neck Shank Overall No. of Dia. ill Dia. of cut Dia. Dia. length lutes ØDc ØD1 ØDs Z 2S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß art Number Outside ength Neck Shank Overall No. of Dia. ill Dia. of cut Dia. Dia. length lutes ØDc ØD1 ØDs Z 2S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S (ong) art Number Outside ength Neck Shank Overall No. of Dia. ill Dia. of cut Dia. Dia. length lutes ØDc ØD1 ØDs Z 2S1-4-4 ß S ß S2-9-4 ß S ß S ß S ß S5-2-6 ß S ß S ß S ß S ß S ß ecommended utting onditions 12~ 13 6 (ustomer Service) Option 1 (echnical Support) Option 2 U.S. Standard : Þ World xpress (Shipping: 7-1 usiness Days) : ß

SU INIS OIND, 2 US, S ON D No. of lutes: 2 2KS, 2K aterials : 1st ecommendation INSS N & D 2KS (Short) art Number 2KS3-45-6 ß 3. 2KS35-52-6 ß 3.5 2KS4-6-6 ß 4. 2KS45-67-6 ß 4.5 2KS5-75-6 ß 5.

7 SU INIS OIND, 2 US, S ON D No. of lutes: 2 2KS, 2K aterials : 1st ecommendation INSS N & D 2KS (Short) art Number 2KS ß 3. 2KS ß 3.5 2KS4-6-6 ß 4. 2KS ß 4.5 2KS ß 5. 2KS ß 5.5 2KS6-9-6 ß 6. 2KS ß 8. 2KS ß 1. 2KS ß 12. 2KS ß 14. 2KS ß 15. 2KS ß 16. Under Outside ength Neck Shank Overall No. of Dia. ill Dia. Neck of cut Dia. Dia. length lutes ength ØDc ØD1 2 ØDs Z K (edium) art Number 2K3-1-6 ß 3. 2K ß 3.5 2K ß 4. 2K ß 4.5 2K ß 5. 2K ß 5.5 2K ß 6. 2K ß 6.5 2K ß 7. 2K ß 7.5 2K ß 8. 2K ß 8.5 2K ß 9. 2K ß 9.5 2K ß 1. 2K ß 11. 2K ß 12. 2K ß 13. 2K ß 14. 2K ß 15. 2K ß 16. Under Outside ength Neck Shank Overall No. of Dia. ill Dia. Neck of cut Dia. Dia. length lutes ength ØDc ØD1 2 ØDs Z UNIN OIN OOVIN U-O DIN SOID ND IS IIN S S O and sharp cutting edge enable high precision finishing due to excellent wear and heat resistance. NI ecommended utting onditions 13 Þ : U.S. Standard ß : World xpress (Shipping: 7-1 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 7

8 SU INIS OIND 4 flutes, Sharp corner edge 4 flutes, ough corner edge No. of lutes: 4 4S 4K INSS aterials : 1st ecommendation aterials : 1st ecommendation N & D UNIN OIN OOVIN U-O NI S S IIN SOID ND IS DIN 4S art Number Outside ength Neck Shank Overall No. of Dia. ill Dia. of cut Dia. Dia. length lutes ØDc ØD1 ØDs Z 4S ß S ß S2-6-4 ß S ß S3-1-6 ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß S ß K Outside ength Neck Under art Number Dia. ill Dia. of cut Dia. Neck Shank Overall No. of ength Dia. length lutes ØDc ØD1 2 ØDs Z 4K3-1-6 ß K ß K ß K ß K ß K ß K ß K ß K ß K ß K ß K ß K ß ecommended utting onditions 14 8 (ustomer Service) Option 1 (echnical Support) Option 2 U.S. Standard : Þ World xpress (Shipping: 7-1 usiness Days) : ß

9 SU INIS OIND, O UOI No. of lutes: 2,3,4 2SW, 3SW, 4SW aterials : 1st ecommendation (2SW) aterial: Kovar alloy INSS 2S (Ø3 2flutes) Smooth surface of shoulder wall ompetitor (Ø3 2flutes) arge burrs acing of machine component Vc=66 sfm (n=215min -1 ) fz=.1 ipt (Vf= 3.9 ipm) arge burrs 2SW 3SW N & D UNIN omparison with competitor's endmill after 6 passes 4SW OIN 2SW art Number Outside ength Shank Overall No. of Dia. ill Dia. of cut Dia. length lutes ØDc ØDs Z 2SW5-5-5 ß SW6-6-5 ß SW3-3-4 ß SW ß SW4-4-4 ß SW5-5-6 ß SW6-6-6 ß SW7-7-7 ß SW8-8-7 ß SW8-8-8 ß SW1-8-7 ß SW1-8-1 ß SW ß SW ß SW ß SW Sharp utting dge educed urrs 3SW art Number Outside ength Shank Overall No. of Dia. ill Dia. of cut Dia. length lutes ØDc ØDs Z 3SW5-5-5 ß SW6-6-5 ß SW3-3-4 ß SW ß SW4-4-4 ß SW5-5-6 ß SW6-6-6 ß SW7-7-7 ß SW8-8-7 ß SW8-8-8 ß SW1-8-7 ß SW1-8-1 ß SW ß SW ß SW ß OOVIN U-O DIN SOID ND IS IIN S S NI art Number Outside ength Shank Overall No. of Dia. ill Dia. of cut Dia. length lutes ØDc ØDs Z 4SW3-3-4 ß SW ß SW4-4-4 ß SW5-5-6 ß SW6-6-6 ß SW7-7-7 ß SW8-8-7 ß art Number Outside ength Shank Overall No. of Dia. ill Dia. of cut Dia. length lutes ØDc ØDs Z 4SW8-8-8 ß SW1-8-7 ß SW1-8-1 ß SW ß SW ß SW ß ecommended utting onditions 15~ 16 Þ : U.S. Standard ß : World xpress (Shipping: 7-1 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 9

10 UI-UNION, I IINY 3ZK riple unction lunge milling, slotting, and finishing with one end mill INSS pplication N & D UNIN riple erformance OIN 1. New design promotes high efficiency cutting Sub-groove on gash breaks chips during plunge milling resulting in smooth chip evacuation OOVIN ffect of sub-groove on gash U-O DIN SOID ND IS revents chip clogging due to deep flute and gash design. IIN S S NI Deep flute 2. onger tool life due to O xcellent wear resistance and heat-resistance O (New VD coat) ottom surface of 3ZK cutting edge 3ZK onventional ndmill 3. etter surface finish due to sharp cutting edge quality Smooth and sharp to the tip of the cutting edge ontrols burr formation. etter surface roughness O Smooth and sharp to the tip of the cutting edge onger tool life and improved surface finish. ompetitor oating ough coating surface and round blunt cutting edge

UI-UNION, I IINY 3ZKS, 3ZK aterials No. of lutes: 3 : 1st ecommendation INSS fig.1 N & D fig.2 UNIN 3ZKS (Short) art Number Under Outside ength Neck Shank Overall No. of Dia. ill Dia. Neck of cut Dia.

- - 1 7 3 3ZKS12-18-12 fig.1 ß 12. -.1 -.3 18. - - 12 75 3 ase Studies of itanium lloy Outside Dia.

of Dia. ill Dia. Neck of cut Dia. Dia. length lutes ength ØDc ØD1 2 ØDs Z 3ZK3-6-6 fig.2 ß 3. -.15 6. 3.2 6.5 6 5 3 3ZK4-8-6 fig.2 ß 4. -.15 8. 4.2 8.6 6 5 3 3ZK5-1-6 fig.2 ß 5. -.15 1. 5.2 1.

11 UI-UNION, I IINY 3ZKS, 3ZK aterials No. of lutes: 3 : 1st ecommendation INSS fig.1 N & D fig.2 UNIN 3ZKS (Short) art Number Under Outside ength Neck Shank Overall No. of Dia. ill Dia. Neck of cut Dia. Dia. length lutes ength ØDc ØD1 2 ØDs Z 3ZKS6-9-6 fig.1 ß ZKS fig.2 ß ZKS fig.1 ß ZKS fig.1 ß ZKS fig.1 ß ase Studies of itanium lloy Outside Dia. aterial Spindle evolution eed ate Depth of ut Ø1 i-6l-4v 3ZK:n=17min -1 ompetitor : n=13min -1 Vf=18.1 ipm ap ae=.8".39" lunge milling 3ZK (edium) art Number Under Outside ength Neck Shank Overall No. of Dia. ill Dia. Neck of cut Dia. Dia. length lutes ength ØDc ØD1 2 ØDs Z 3ZK3-6-6 fig.2 ß ZK4-8-6 fig.2 ß ZK5-1-6 fig.2 ß ZK fig.1 ß ZK fig.2 ß ZK fig.1 ß ZK fig.1 ß ZK fig.1 ß etter surface finish and longer tool life with 3ZK. ompared to competitor s coated products, the 3ZK has a 1.4 times longer tool life. 3ZK prevents burr formation due to sharp cutting edge. utting edge after 35 passes lunge milling OIN OOVIN U-O DIN SOID ND IS IIN S S ompetitor 3ZK ompetitor 3ZK NI Þ : U.S. Standard ß : World xpress (Shipping: 7-1 usiness Days) (ustomer Service) Option 1 (echnical Support) Option 2 11

12 ONDD UIN ONDIIONS 2SS pplications aterial pplication Outside Dia. Dc (mm) Ø1 Ø2 Ø4 Ø6 Ø8 Ø12 Ø16 INSS arbon Steel Spindle 25,5 13,2 6,6 4,5 3,3 2,2 1,7 eed ate (I) Spindle 15,3 8, 4, 2,7 2, 1,3 1, eed ate (I) UNIN N & D.472Dc.2Dc (Dc<Ø3).472Dc.39Dc (Dc Ø3) lloy Steel Spindle 22, 11, 5,6 3,7 2,8 1,9 1,4 eed ate (I) Spindle 13, 6,6 3,4 2,2 1,7 1,2 9 eed ate (I) OIN re-hardened steel (3~45) Spindle 12,7 7,2 4,2 3, 2,2 1,5 1,1 eed ate (I) Spindle 7,6 4,3 2,5 1,8 1,3 9 7 eed ate (I) U-O OOVIN (ae) (inch).39dc (Dc<Ø1).118Dc (Ø1 Dc<Ø3).197Dc (Dc Ø3) Spindle 22, 11, 5,6 3,7 2,8 1,9 1,4 eed ate (I) Spindle 13, 6,6 3,4 2,2 1,7 1,2 9 eed ate (I) * utting with coolant is recommended for stainless steel. IIN SOID ND IS DIN 2S pplications aterial arbon Steel pplication Outside Dia. Dc (mm) Ø.5 Ø1 Ø2 Ø4 Ø6 Ø8 Ø12 Ø16 Spindle 32, 25,5 13,2 6,6 4,5 3,3 2,2 1,7 eed ate (I) Spindle 19, 15,3 8, 4, 2,7 2, 1,3 1, eed ate (I) S S.591Dc.2Dc (Dc<Ø3).591Dc.39Dc (Dc Ø3) lloy Steel Spindle 27, 22, 11, 5,6 3,7 2,8 1,9 1,4 eed ate (I) Spindle 16, 13, 6,6 3,4 2,2 1,7 1,2 9 eed ate (I) NI re-hardened Steel (3~45) Spindle 22,5 12,7 7,2 4,2 3, 2,2 1,5 1,1 eed ate (I) Spindle 13,5 7,6 4,3 2,5 1,8 1,3 9 7 eed ate (I) (ae) (inch).39dc (Dc<Ø1).118Dc (Ø1 Dc<Ø3).197Dc (Dc Ø3) Spindle 27, 22, 11, 5,6 3,7 2,8 1,9 1,4 eed ate (I) Spindle 16, 13, 6,6 3,4 2,2 1,7 1,2 9 eed ate (I) * utting with coolant is recommended for stainless steel

ONDD UIN ONDIIONS 2S () pplications aterial arbon Steel Outside Dia. Dc (mm) Ø1 Ø2 Ø4 Ø6 Ø8 Ø12 Ø16 Spindle 19, 9,5 4,8 3,2 2,4 1,6 1,2 eed ate (I) 8.268 8.

13 ONDD UIN ONDIIONS 2S () pplications aterial arbon Steel Outside Dia. Dc (mm) Ø1 Ø2 Ø4 Ø6 Ø8 Ø12 Ø16 Spindle 19, 9,5 4,8 3,2 2,4 1,6 1,2 eed ate (I) lloy Steel Spindle 14,3 7,2 3,6 2,4 2, 1,3 1, eed ate (I) INSS re-hardened Steel (3~45) Spindle 11,2 5,6 2,8 1,9 1,6 1, 8 eed ate (I) N & D.984Dc.2Dc (Dc<Ø3).984Dc.39Dc (Dc³Ø3) Spindle 14,3 7,2 3,6 2,4 2, 1,3 1, eed ate (I) UNIN * utting with coolant is recommended for stainless steel. is not recommended. OIN 2KS, 2K OOVIN pplications.472dc.39dc aterial arbon Steel lloy Steel re-hardened Steel (3~45) pplication Outside Dia. Dc (mm) Ø3 Ø4 Ø6 Ø8 Ø1 Ø12 Ø16 Spindle 9,3 7, 4,6 3,5 3, 2,7 2,2 eed ate (I) Spindle 7,5 6, 4,4 3,3 2,7 2,3 1,9 eed ate (I) Spindle 8,8 6,6 4,4 3,3 2,6 2,2 1,8 eed ate (I) Spindle 7,2 5,4 3,6 2,7 2,2 1,8 1,5 eed ate (I) Spindle 6,4 4,8 3,2 2,4 1,9 1,6 1,2 eed ate (I) Spindle 5,3 4, 2,6 2, 1,6 1,3 1, eed ate (I) U-O DIN SOID ND IS IIN (ae) (inch).197dc Spindle 8, 6, 4, 3, 2,4 2, 1,5 eed ate (I) Spindle 5,3 4, 2,6 2, 1,6 1,3 1, eed ate (I) S S * utting with coolant is recommended for stainless steel. NI

14 ONDD UIN ONDIIONS 4S () pplications aterial Outside Dia. Dc (mm) Ø1 Ø2 Ø4 Ø6 Ø8 Ø12 Ø16 INSS arbon Steel lloy Steel Spindle 25,5 13, 6,6 4,4 3,3 2,2 1,7 eed ate (I) Spindle 22, 11, 5,6 3,7 2,8 1,9 1,4 eed ate (I) N & D re-hardened Steel (3~45) Spindle 12, 7,2 4,2 3, 2,2 1,5 1,1 eed ate (I) UNIN.591Dc.2Dc (Dc<Ø3).591Dc.39Dc (Dc Ø3) Spindle 22, 11, 5,6 3,7 2,8 1,9 1,4 eed ate (I) * utting with coolant is recommended for stainless steel. OIN is not recommended. OOVIN 4K (ough corner edge) () U-O pplications arbon Steel aterial Outside Dia. Dc (mm) Ø3 Ø4 Ø6 Ø8 Ø1 Ø12 Ø16 Spindle 1,6 8, 5,3 4, 3,2 2,7 2,1 eed ate (I) DIN lloy Steel Spindle 8,8 6,6 4,4 3,3 2,6 2,2 2, eed ate (I) SOID ND IS IIN.591Dc.39Dc re-hardened Steel (3~45) * utting with coolant is recommended for stainless steel. Spindle 6,4 4,8 3,2 2,4 1,9 1,6 1,2 eed ate (I) Spindle 8, 6, 4, 3, 2,3 2, 1,5 eed ate (I) S S is not recommended. NI

15 ONDD UIN ONDIIONS 2SW pplications aterial pplication Outside Dia. Dc (mm) Ø3 Ø4 Ø5 Ø6 Ø8 Ø1 Ø12 Ø13 arbon Steel Spindle 11, 8, 6,4 5,3 4, 3,2 2,7 2,5 eed ate (I) Spindle 11, 8, 6,4 5,3 4, 3,2 2,7 2,5 eed ate (I) INSS.394Dc.79Dc lloy Steel Spindle 7,4 5,6 4,5 3,7 2,8 2,2 1,9 1,7 eed ate (I) Spindle 7,4 5,6 4,5 3,7 2,8 2,2 1,9 1,7 eed ate (I) N & D (ae) (inch).79dc re-hardened Steel (3~45) * utting with coolant is recommended for stainless steel. Spindle 7,4 5,6 4,5 3,7 2,8 2,2 1,9 1,7 eed ate (I) Spindle 7,4 5,6 4,5 3,7 2,8 2,2 1,9 1,7 eed ate (I) Spindle 6,4 4,8 3,8 3,2 2,4 1,9 1,6 1,5 eed ate (I) Spindle 6,4 4,8 3,8 3,2 2,4 1,9 1,6 1,5 eed ate (I) UNIN OIN OOVIN 3SW U-O pplications.394dc.79dc aterial arbon Steel lloy Steel pplication Outside Dia. Dc (mm) Ø3 Ø4 Ø5 Ø6 Ø8 Ø1 Ø12 Ø13 Spindle 11, 8, 6,4 5,3 4, 3,2 2,7 2,5 eed ate (I) Spindle 11, 8, 6,4 5,3 4, 3,2 2,7 2,5 eed ate (I) Spindle 7,4 5,6 4,5 3,7 2,8 2,2 1,9 1,7 eed ate (I) Spindle 7,4 5,6 4,5 3,7 2,8 2,2 1,9 1,7 eed ate (I) DIN SOID ND IS IIN re-hardened Steel (3~45) Spindle 7,4 5,6 4,5 3,7 2,8 2,2 1,9 1,7 eed ate (I) Spindle 7,4 5,6 4,5 3,7 2,8 2,2 1,9 1,7 eed ate (I) S S (ae) (inch).79dc Spindle 6,4 4,8 3,8 3,2 2,4 1,9 1,6 1,5 eed ate (I) Spindle 6,4 4,8 3,8 3,2 2,4 1,9 1,6 1,5 eed ate (I) NI * utting with coolant is recommended for stainless steel

16 ONDD UIN ONDIIONS 4SW pplications aterial pplication Outside Dia. Dc (mm) Ø3 Ø4 Ø5 Ø6 Ø8 Ø1 Ø12 Ø13 INSS arbon Steel Spindle 11, 8, 6,4 5,3 4, 3,2 2,7 2,5 eed ate (I) Spindle 11, 8, 6,4 5,3 4, 3,2 2,7 2,5 eed ate (I) N & D.394Dc.79Dc lloy Steel Spindle 7,4 5,6 4,5 3,7 2,8 2,2 1,9 1,7 eed ate (I) Spindle 7,4 5,6 4,5 3,7 2,8 2,2 1,9 1,7 eed ate (I) UNIN re-hardened Steel (3~45) Spindle 7,4 5,6 4,5 3,7 2,8 2,2 1,9 1,7 eed ate (I) Spindle 7,4 5,6 4,5 3,7 2,8 2,2 1,9 1,7 eed ate (I) OIN OOVIN (ae) (inch).79dc * utting with coolant is recommended for stainless steel. Spindle 6,4 4,8 3,8 3,2 2,4 1,9 1,6 1,5 eed ate (I) Spindle 6,4 4,8 3,8 3,2 2,4 1,9 1,6 1,5 eed ate (I) U-O 3ZKS (Short), 3ZK (edium) pplications aterial Depth of ut Outside Dia. Dc (mm) Ø3 Ø4 Ø5 Ø6 Ø7 Ø8 Ø1 Ø12 SOID ND IS DIN arbon Steel Short.472Dc.118Dc edium.591dc.118dc lunge milling 1Dc eed ate (mm/min) Spindle 13,8 1,7 8,8 7,5 6,6 6, 4,8 4, lunge milling Spindle 1,6 9,3 8,3 7,4 6,5 6, 4,7 3,5 S S IIN lloy Steel re-hardened Steel (3~45) Short.472Dc.118Dc edium.591dc.118dc lunge milling.5dc eed ate (mm/min) eed ate (mm/min) lunge milling Spindle 5,2 4, 3,2 2,6 2,3 2, 1,6 1, lunge milling NI lunge milling itanium lloys Short.472Dc.79Dc edium.591dc.79dc lunge milling.5dc eed ate (mm/min) eed ate (mm/min) Spindle 3,3 2,5 2, 1,7 1,4 1,3 1, lunge milling Spindle 3,3 2,5 2, 1,7 1,4 1,3 1, lunge milling ompressed air is recommended for cutting steel. Water soluble coolant is recommended for machining stainless steel and titanium alloys. djust depth of cut (ap) to suit machine rigidity

PRODUCT LINEUP SUMMARY OF CUT-OFF SMALL DIAMETER CUT-OFF TOOLHOLDERS CUT-OFF TOOLHOLDERS (2-EDGE INSERT)

PRODUCT LINEUP SUMMARY OF CUT-OFF SMALL DIAMETER CUT-OFF TOOLHOLDERS CUT-OFF TOOLHOLDERS (2-EDGE INSERT) ODU INU SUY O U-O U-O 1-26 2 3-5 S DI U-O OOODS 6-11 KK ateral Side Screw lamp olders 8 KKS (SU SIND) ateral Side Screw lamp olders 10 U-O OOODS (2-D INS) 12-17 KD (SWISS) Integral oolholders 16 KD Integral