IPEmotion Release News 2017 R3

Transcription

1 IPEmotion Release News 2017 R3 November

2 IPEmotion 2017 R3 General changes Table of contents 1 IPEmotion 2017 R3 General changes PlugIns included in the Setup Supported Languages in the Setup TEDS Editor to define new sensors New functions in OPTIONS Clipboard function for license dialog Unit frame rate New functions in SIGNALS Synchronization of description file on name level only DBC files supporting initial values for CAN send Event controlled signal selection for DBC import FlexRay signals with Multiplexer Address extension parameter for CCP measurement New functions in VIEW Reset of time axis in Yt-chart for storage events Alphanumerical instrument with settings for individual font size Edit min/max scaling for joint Y-axis Table instrument with responsive minimum font size New functions in DATA MANAGER PlugIn for user specific postprocessing operations BLF traffic data import format Correction factor settings for FFT and Campbell operation Relative results for sample count classifications New functions in ANALYSIS Offline traffic filter operation Yt-chart with graph style display mode IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 2/ 26

3 IPEmotion 2017 R3 General changes 1 IPEmotion 2017 R3 General changes 1.1 PlugIns included in the Setup IPEmotion PlugIn IPETRONIK CAN V IPEmotion PlugIn IPETRONIK LOG V IPEmotion PlugIn IPETRONIK X V IPEmotion PlugIn Protocols V IPEmotionPlugin Video V IPEmotionPlugin GPS V Supported Languages in the Setup English German 1.3 TEDS Editor to define new sensors With the TEDS Editor Tool you can update and create new TEDS parameters of your sensors. The following drawing shows the system architecture. IPETRONIK is offering TEDS interfaces suitable for the different LEMO 10-pole, 7-pole und 6-pole sensor input cables. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 3/ 26

4 IPEmotion 2017 R3 General changes The new function of the TEDS Editor tool is that sensor can be created from scratch. When you create a new sensor, you can select from the following 3 templates. The drop dow list of the physical measurement ranges are related to selected template types above. High Level Voltage Outout Sensor Accelerometer and Force Transducer Current Loop Output Sensor The screenshot blow shows a new created sensor. IPETRONIK is registered officially as a TEDS sensor manufacturer. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 4/ 26

5 IPEmotion 2017 R3 General changes When you create a new sensor, detect the data of a sensor, or load a TEDS binary configuration file most of the data fields are editable as indicated below via the red dots. Some field are not editable for all sensor. Some of the fields are not editable depending on the selected template type. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 5/ 26

6 New functions in OPTIONS 2 New functions in OPTIONS 2.1 Clipboard function for license dialog Th license dialog is supporting the function to past license from the clipboard directly into the licenses dialog. The button read from clipboard is only visible when a license code is stored in the clipboard. 2.2 Unit frame rate The unit frame rate was introduced to adapt the settings and unit conversion to different frame rates per seconds, minutes or hours. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 6/ 26

7 New functions in SIGNALS 3 New functions in SIGNALS 3.1 Synchronization of description file on name level only You can use the description file synchronization function to compare your existing measurement configuration against a new description file. The description file synchronization is useful to get a direct view about the differences between a new ECU description file and your current measurement configuration. In the standard setup the description file is compared on Message ID and channel name. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 7/ 26

8 New functions in SIGNALS When one of the two parameters is different, the synchronization will not take place and you will get a notification in the message window. The standard synchronization behavior can cause an additional workload when e.g. a channel is switched to a different message because then the synchronization does not take place and the related links to the VIEW instruments and formulas or storage in ACQUISITION work space etc. is removed as well. With the new EXPERT setting Synchronize signals by name the synchronization mechanism is focusing only on the channel name and not any more on the message ID. The benefit for the user is that the synchronization will take place and the links to the VIEW instruments etc. remain intact to display online data. The screenshot below in indicating on the right-hand side, that the channel Exhaust_1 was successfully synchronized even so that it is included on a different CAN message ID. Information The EXPERT settings are may stored in the IWF file if you activate the check box in FREQUENTLY USED > Include Options in configuration. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 8/ 26

9 New functions in SIGNALS 3.2 DBC files supporting initial values for CAN send When a DBC file includes initial values for CAN message sending, the start values can be imported and displayed. The initial value becomes only active and visible when the data format is configured in the format tab sheet to output. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 9/ 26

10 New functions in SIGNALS 3.3 Event controlled signal selection for DBC import The description file import dialog offers in the channel grid a new configuration function. In the signal grid you can use the column chooser to add a new channel property to the grid which is called Cyclic. Within the Cyclic column you can switch the measurement mode of all signals included in a CAN message to event controlled or to cyclic operation. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 10/ 26

11 New functions in SIGNALS The settings from the import dialog regarding measurement mode is also reflected in the column sample rate in the channel grid as indicated below. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 11/ 26

12 New functions in SIGNALS 3.4 FlexRay signals with Multiplexer The import of FIBEX files is supporting multiplex signals. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 12/ 26

13 New functions in SIGNALS 3.5 Address extension parameter for CCP measurement The A2L import for CCP measurement is supporting additional information to indicate the address extension type. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 13/ 26

14 New functions in VIEW 4 New functions in VIEW 4.1 Reset of time axis in Yt-chart for storage events In the VIEW section of the options dialog you can configure an automatic reset of the relative time axis in an Yt-chart. In the default behavior you may start your data display and execute the storage operation some time later. In this case the Yt-chart keeps plotting the relative time and it is not visible at what point in time the data storage activated. When you activate the function Reset relative time on each start of storage in the VIEW options the display behavior of a storage event will change. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 14/ 26

15 New functions in VIEW In this case if you run the display of data for some time and you execute the storage button from the ribbon, the diagrams sets the relative time axis for the storage event to zero. Information The reset of the time axis is only functional when you operate the storage button from the ribbon. When you execute the data storage from trigger events the Yt-chat time axis is not affected. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 15/ 26

16 New functions in VIEW 4.2 Alphanumerical instrument with settings for individual font size The alphanumerical display is supporting a new font size configuration setting. In the per-channel mode the font size of each channel will be individually set to the available space in the instrument container. The setting is considering the number of decimal places configured in the display tab sheet in the SIGNALS workspace. Text channels are considered in the size calculation with the decimal format Automatic. All numeric or text channels with automatic decimal place configuration will get the same font size. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 16/ 26

17 New functions in VIEW 4.3 Edit min/max scaling for joint Y-axis For diagrams with joint Y-channel axis the min and max display range is commonly configured for all channels associated to the Y-axis in the head-up display. VIEW instruments Yt-chart, xy-chart & FFT, Oscilloscope ANALYSIS instruments: Yt-chart, xy-chart & FFT, Polar diagram IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 17/ 26

18 New functions in VIEW 4.4 Table instrument with responsive minimum font size The table instrument in the VIEW and ANALYSIS work space is respecting a minimum font size for small application windows to ensure good readability for the user. In the past the font size was scaled down accordingly to the application window size, the channel names and data in the table instrument was getting unreadable in the case of very small applications windows. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 18/ 26

19 New functions in DATA MANAGER 5 New functions in DATA MANAGER 5.1 PlugIn for user specific postprocessing operations The PlugIn concept is also available for post processing operations. The PlugIn interfaces allows every developer to include his individual post processing operations in the DATA MANAGR work spaces. In order to install the user Operation PlugIn documentation you have to include the SDK package during installation. The manual is installed in the following directory: C:\Program Files (x86)\ipetronik\ipemotion 2017 R3\UOP Information In order to develop a user operation PlugIn you need to obtain an official manufacturer code for your PlugIn. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 19/ 26

20 New functions in DATA MANAGER When you have installed the demo user operation PlugIn you will get additional analysis operations function in the DATA MANAGER as indicated below. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 20/ 26

21 New functions in DATA MANAGER 5.2 BLF traffic data import format The data import formats are extended. BLF traffic files for CAN, CAN FD und FlexRay traffic are supported. The import of IPEmotionRT data files is coving the new format from new LINUX based data loggers. BLF traffic (CAN, CAN FD und FlexRay) IPEmotionRT IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 21/ 26

22 New functions in DATA MANAGER 5.3 Correction factor settings for FFT and Campbell operation The FFT and Campbell operation is supporting for the different window function predefined correction actors. 5.4 Relative results for sample count classifications The sample count and sample count compound classification can display the results also in percent based on all samples counted. In the case that some samples are outside your defined boundaries the calculated percentage will not add up to 100%. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 22/ 26

23 New functions in ANALYSIS 6 New functions in ANALYSIS 6.1 Offline traffic filter operation The offline traffic analyzer is supporting extended filter functions For the traffic filter configuration, the same functions are available as for online traffic filter measurement. Create filers from DBC file by selecting specific messages Define filter manually IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 23/ 26

24 New functions in ANALYSIS 6.2 Yt-chart with graph style display mode In the head up display of the Yt-chart you can select different graph styles. With the graph style you have an impact on how the graph line will be plotted between the connecting data points. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 24/ 26

25 New functions in ANALYSIS The impact of the different graph styles will be presented below. Automatic In this line style mode the default behavior is reflected. When you zoom into the data, at a certain high zoom level the data points appear and the and the data points are connected in a step line type. Linear In this mode the graph will show on all high and low zoom levels only a line and no data points. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 25/ 26

26 New functions in ANALYSIS Steps In this mode you get at all zoom levels a step type line presentation between the data points. IPEmotion Release News 2017 R3 IPETRONIK GmbH & Co. KG ipetronik.com 26/ 26