VERSION DESCRIPTION DOCUMENT INCA 3D

Transcription

1 VERSION DESCRIPTION DOCUMENT INCA 3D Last modification: Responsible: Stéphane PÉNEAU (Inspect 3D) Software version: V (patch 1 8) Date of print 2007/01/23 7 page(s) Release Date: General Advantages: Master Scan Driver for GSI Photogrammetry system Driver for Acticm Actiris 350 Driver GARDA arm Management SP80 and SCP80 (rack) Russian Version using.trl Extensions: Master Scan o Scanning for unknown part o Management of Renishaw SP25 and SP80 o 2D and 3D scan with chordal deviation respect o Dynamic PH head orientation - Dynamic machine parameter calculation o Real time graphic display - IGES and VDA export o Master Scan with Renishaw TPxx is Low-cost scan alternative to Renishaw SPxx Graphical viewer o Ability to manage transparency in the CAD viewer (for machine and probe display) o Ability to add clipping plane in the view Ability to set section plane as clipping plane during section calculation Access graphic view parameters tabsheet Clipping o Vector display during Surface point solution choice o Deviation display Ability to display nominal and/or actual entity in the graphic. (Access graphic view parameters tabsheet Entities ) Disk a disk is displayed with color of the tolerance o Entities display Point ability to display vector for point with vector Line / Cylinder display vector when selected o Grid in graphic viewer Dynamic grid allows displaying a 2D grid when view is in main coordinate system planes. (check dynamic grid in graphic view parameters tabsheet Grid ) Action Cloud of point o Probed direct connection to machine with TPxx o constructed by file ASCII files with several format (in execution INCA3D wait that file exists to continue execution) o measured Point are projected on Cad file Report o Ability to set output order for action in the report (R1601) Label o Ability to preview label sample o Double click on label to zoom it, then pop-up save as preview VDD_INCA3D_English_2007_01_23_V_1_6_2_8.doc Page 1 of 7 Form I3D-VDD001

2 : UCC2 Driver Save views as picture add EMF and WMF format Form deviation display tab sheet o Possibility to select a list of points in the form deviation tab sheet and delete / deactivate / activate them and also delete / deactivate them regarding a deviation range (Popup-Menu) V-STAR o TCP-IP and Serial communication available o generate probing in V-STARS when pressed key F2 HotlineMessenger: a new directory is created by installation, HTM generates now files in this director INCA3D/HotLineMessenger. Solved Software Reports (V1620): R0000: Possibility to choose to add Deviation or Actual results in label with deviation logo R1395: Management of Deviation keywords in Smart Formula Calculator R1560: ZipExtraction program inform user of missing or corrupted files and ask him to redownload them. M0056: For Cad construction of Roundslot, possibility to define the width with the complete length. M0054: Ability to calculate intersection point between 2 curves access in graphic selection window, activate project on nearest curve, then click point on one curve R1593: If we have selected a simplification file there no way to unselect it Bug fixes (V1620): R1615: When change profile directory to have separate User and Profile directories : the users ini files are created twice, in user and profile directories. FIXED R1616: Load ops action with "Execute each time" does not work. FIXED R0000: Label with deviation graph for rectangle only W displayed NOT L for length. To check other entities FIXED R0000: Label with deviation graph - size personalized. Click on the label and reduce it --> if too small --> "Division by 0" FIXED Usable Operating Systems: Windows 2000, Windows XP Pro (Windows 9x and ME not recommended) Compatibility of the hardware device, Counter Card, Link to DCC must be check separately with the hardware provider INCA3D installation and License Key Installation must be performed with Windows administrator right. Gemodek New DLL s: gcv5.dll gelement.dll gnc.dll GZakMath.dll Iges32.dll Mathem32.dll Softko32.dll vda32.dll Vm32.dll Multiplex Configuration: Working directories /CAD and /OperationSequence should be same shared directories on all PC s. Dongle driver: Download at - For Windows XP and Windows Install first HASP HL Driver V5.20: haspusersetup.exe (V5.20) 2- Then install HASP4 Device Drivers V : hdd32.exe (HASP4 V ) Remarks Some of the functions and improvements described in this document may not be available for your INCA3D license depending on Package and options. Contact us for further details Documentation updates: VDD_INCA3D_English_2007_01_23_V_1_6_2_8.doc Page 2 of 7 Form I3D-VDD001

3 English Help Version E German Help Version G French Help Version F.1.3 Valid Maintenance Date needed: Date actual Installation release: Modifications & Bug fixes (patch V ): R1673: Memory leak in virtual calibration of ZAK FIXED R1671: Reprobing on an alignment with a Load OPS entity. The machine is stopped, Inca must be restarted. FIXED R1675: Management of form deviation allowed for calibration of tools R1675: Management of form deviation allowed for calibration of tools R1676: Add the possibility to set inside the action how it is exported into *.inl file. (Automaticaly imported from *.mdb) R1677: Add the possibility to export to *.inl file several time the same reference (Removing the #x created during the importation of *.mdb files). M0066: Add the possibility to insert a comment action according to the comment set in the action reference imported from an *.mdb file. Modifications & Bug fixes (patch V ): Internet customer link internet link to display last news about INCA3D Scanning Probe SP25 SP80 o Sphere calibration is also perform in scanning mode o Installation of Renishaw SP25 SP80 SP2 in INCA3D installation Operation sequence o Ability to execute an action in teach and measure mode without modifying measuring path new option in operation sequence editing parameter Alignment Nominal-Actual o When checking «display referenced element in alignment», actual referenced element are displayed in the created alignment allowing to verify easily alignment quality (M0008) CAD conversion o IGES support entity 408 support of Layer o VDA PSET and MDI that contain only 1 point are loaded as point MILL o 5 axis milling management with MORA ZAK R1678: Click on Section in Toolbar: error message Action not implemented. Previous action create a Point Intersection Line-Circle. FIXED R1681: ANC40 in simulation, Rotary table C angle is not updated when execute rotary table action FIXED R1682: With PH angle A and B are disabled in Virtual machine window FIXED R1686: Inca3D does not work under Windows NT. GetMonitorInfo function is not supported. FIXED G0207: IGES conversion type 408:IGES data from solidworks. Groups are not transformed to right geometrical place FIXED M0078: New calculation for lines with no projection plane FIXED R1695: When execute a milling action, Progress bar and buffer status bar does not appear FIXED VDD_INCA3D_English_2007_01_23_V_1_6_2_8.doc Page 3 of 7 Form I3D-VDD001

4 R1700: CMM-OS Driver - When cancel an action with probed points, Inca is always asking to select the current probe configuration if no current configuration activated. FIXED R1704: In Nplex mode, the optimization is not applied on all computers. The measurement has to be recalculated at the end of the execution FIXED R1656: If we drag a cloud of points in an action by ref or by construction, add the possibility to select all the points. R1680: Default parameter for calibration of Milling ZAK are different than for Standard ZAK R1683: Configuration - Management of relative file path for Rotary table alignment file R1687: When calibrate sphere with a SP25 connected, scan the sphere to get a better result for calibration R0000: Graphic selection - cannot select MDI in graphic see VDA file M0074: Ability to import Probe as ID +1 during *.mdb file importation. M0077: Alignment imported from *.mdb files must be created with N&T strategy instead of XYZ M0075: CMM-OS : Cursor of the editor does not follow the machine during the execution of gage points R1692: A milling action can be executed without any change tool action before R1696: Management of ZAZZ command send by ZEISS CMM-OS R1698: Display of alignment results may use wrong tolerancing color R1701: CMM-OS Driver - Confirmation dialog for probe rotation. The text "Reference" is not displayed at the right position M0050: We should create a button in the label view that if you click on it you switch in the working view ( it'faster and easier instead to go to graphic view status...) Modifications & Bug fixes (patch V ): Graphical viewer o Ability to display colors from IGES files o Ability to display OPS action with color regarding deviation Roundslot and Rectangle o Add the possibility to display the twist angle in roundslots, rectangles and ellipses (angle between nominal and real primary axis) (M0012) Configuration and User profile inside INCA3D o Add ability to modify parameter in configuration inside INCA3D (access menu /File/Configuration INCA3D) o Add to switch user inside INCA3D (access menu /File/switch user) o Some fields cannot be updated when configuration is run from INCA3D Tools Renishaw RTP20 Management Green Arrow in action parameter windows is replaced by when store meas. Path when execute action is unchecked in operation sequence parameter METRONOR - add in Metronor protocol, manage command format 281, 527, 627, 628 Master SCAN o Ability to export measurement in NC file for Milling or drilling purpose Actions not exported in INL appear grayed with a dashed icon in the editor Documentation updates: French Help Version F.1.4 R1685: some edge points have no result on Normal, and cannot be modified FIXED R1672: Global modification of a Measured point with Copy Actual in Nominal. It seems this function does not copy the vector in Nominal KB FIXED VDD_INCA3D_English_2007_01_23_V_1_6_2_8.doc Page 4 of 7 Form I3D-VDD001

5 R1670: Calculation of Distance Meas with surface point probed with virtual machine and a probe with a radius=1.5mm. The distance calculated is not ok FIXED R1610: Path wizard of sphere, if enter dummy value for Distance for the first and last gage point, INCA close, stack overflow FIXED R1529: When using scan function for surface entities with Faro arm : "pt surf nominal : action has never been calculated" FIXED R1705: Unable to add more than one external program in "External applications". FIXED R1690: Use label in "Personalized" size mode. When excute an action my label size is changing (only the height is keept) FIXED R1717: When execute an Operation sequence created from a DMIS importation, the load alignment action displays an error "Action not available in measure". FIXED R1651: Allowing to select point without vector in surface alignment as real entity R1711: Probed actions in teach and measure mode. If "Store meas. path when execute action" is checked in "Editing options", each time the existing measuring path will be updated, the green arrow is now displayed with a red sphere on its left. R1715: Add in Metronor protocol, manage command format 281, 527, 627, 628 R1716: Ability to desactivate probe in Faro CATCount driver (Scribing function) R1721: Scanning: The exit vector is validated even if it is not used for trigger probe R1722: Scanning: Plane vector calculation regarding start point vector and scan direction can give a vector in the wrong direction (probing macro) FIXED R1727: ACTIRIS350 - When change probe on ACTIRIS 350, incad is not automatically updated R0000: Sometimes (once a week) the buttons Apply/Cancel of the parameter window disappears. To see them anew we need to resize the window or open another action. R1730: Save mill/scan action parameters automatically before starting mill. Otherwise they are lost in case of interruption R1734: If SP80 with SCP80 is available, option to deactivate confirmation for change stylus holder is not displayed in action machine parameters FIXED R1737: Ability to export measure in NC format R1740: DMIS exportation of Surface points with an actual Kb is not working FIXED R1742: Optimization with Cloud of points measured is not working properly (Data used for optimization calculation are not in the right alignment) R1743: Importation of Faro Database. New option to calculate angle for RDS Caa probe according to the probe ID read in the *mdb file R1744: In High level. Switching between Horizontal/Vertical split and Tabsheet generates crashes. R0000: IGES conversion support chain of transformations for element 408. M0071: Actions that are not exported in INL appear grayed with a dashed icon in the editor Modifications & Bug fixes (patch V ): HotlineMessenger Simplification o Remove tabsheet "Computer information". Most of computer information are now read in System/Registry by the program. o Topic is now the default tabsheet Renishaw UCC Driver o add a factor for max speed in configuration R1752: Result of N deviation for Cloud of points action is not displayed in report when X deviation is not displayed. FIXED R1731: Display deviation vector with disk, when uncheck, disks are not removed in the view FIXED R1757: since V Execution freezed on action point measured with type keyboard for nominal and actual (Can occurred also during execution of DMIS file) FIXED VDD_INCA3D_English_2007_01_23_V_1_6_2_8.doc Page 5 of 7 Form I3D-VDD001

6 R1760: If switch kind of color for OPS elements (global <--> tolerance), the display on the view is not updated. Old colors are still displayed FIXED R1754: If we display the vector deviation on X Y Z T N then there infinite lines...if we display only on N it is OK. FIXED R1762: Calculation of Flush & Gap measured is not properly performed when nominal point 1 and real point 1do not contain the same vector orientation (do not happen with surface points and edge surface points). FIXED R1749: For CAA without GEMODEK drivers, add possibility to define a reference offset R1753: Possibility to manage conditons on generic label. R1755: I create Form deviation views. Each time I switch between views, even if I have modify nothing this question appears : "The current view has been modified. Do you want to save the modifications?" Modifications & Bug fixes (patch V ): Miling and scribing o Calibration of milling tool and probing tool on cube o Possibility to take points manually by keyboard. It means: move the machine to a special position and take the point there by pressing a key on the keyboard Gemodek New DLL s: gcv5.dll gelement.dll gnc.dll GZakMath.dll Iges32.dll Mathem32.dll Softko32.dll vda32.dll Vm32.dll R1767: When change probe with SCP80, INCA3D move to safety plane between unload position and load position FIXED R1768: Parameters for Kind color and Cad color are not saved in the Inca.ini FIXED R1769: In section view, with constructed section with edge point, graphic labels are not displayed. FIXED R1770: Twist angle not managed properly in DefaultGraphicLabel,DetailGraphicLabel (column with) in specific mode. Not managed at all in generic mode. Not display properly in Deviation graph (Angle value displayed on the drawing and no angle in actual mode) FIXED R1771: Deviation graph bad display for Cloud measured FIXED R1736: When sorting entities in the report with High Level Ops, function work on first measure but I have to reset entities order for a second measurement FIXED R1763: with SPxx Machine error 33 + unexpected probe contact --> CTRL ALT DEL FIXED R1764: when scanning a circle if user stop - floating point overflow - click 10 time OK - exiting INCA is necessary FIXED R1797: If several spheres were used during calibration, sphere1 always activated in calibration dialog. If tool calibration has been done with sphere2, length correction is done with sphere1, if sphere 2 is not activated in calibration dialog FIXED R1798: Machine parameters are not saved in ZAK calibration dialog FIXED R1799: Point for tool length correction cannot be taken automatically FIXED R1796: Bug with ZAK correction when Probe offset/ Milling tool offset is not null FIXED R0000: Tool offset correction in 5 axis milling is not correct FIXED R1785: If you construct a round slot and you change the lengths and say refresh graphic you get this picture- In the glossary was chosen complete length- Bug complete length / beetwen circle FIXED R1795: For CAA without GEMODEK drivers, be able to define a CAA reference offset R1802: Contact point calculation with cylidrical probe improvement Modifications & Bug fixes (patch V ): VDD_INCA3D_English_2007_01_23_V_1_6_2_8.doc Page 6 of 7 Form I3D-VDD001

7 VStar managing VStar file format in importation R1811: SCP80 change tool cycle, move only along main axis (Ticket #144) FIXED R1812: For standard probe, if Allow to define CAA offset for calibration is not set, CAA offset sent is NULL FIXED R1825: You choose a gage Point by relative probing, and after this you choose another gage point and you will have all the time the relative strategy in the gage point function. Of course you can change every element but if you save it or apply it in the next gage it is lost FIXED R1828: in V Referenced element of plane-line-point / geometrical / 3 planes alignments are not displayed at the right position in the graphical view FIXED R1826: Measpath calculation for cylinder is not correct if angle range is less than 360 FIXED R1854: Driver Standard XYZ and 3 signs, if digit count for coordinate is less than 9, INCA3D failed to translate string received FIXED R1836: Add in counter window the possibility to deactivate probe to perform scribing R1298: We need a deactivation of MIH because if you switch between angels you olways have a peep and if you did not deactivate the probe or open the changing probe button next element has a point saved G0406: only one drill tool is available:is it possible to work with several drill tools in different lengths? G0430: Add possibility to update the temperature for CAA FIXED R0395: On Probe change during an Operation Sequence the Probe always send Points to INCA. A Function with Traffic Light like in Tool Manager is required (MIH, MIH-S) Modifications & Bug fixes (patch V ): Brown & Sharpe managing Brown and Sharpe DCC controller (contact us for details) R1869: With Faro Arm and Garda Arm, when start INCA3D, probe point is not allowed. With machine application it works FIXED R1833: if you probe a edge Point and you must probe another Element regarding the edge point and you choose relative probing in edge or normal direction of the edge point is not posible / you get wrong path wizard. FIXED R1878: Scanning: Gage points to go over an inner curve are not always executed FIXED R1880: With SCR200/MCR20 during change tool sequence, when unload current position, gage poitn to enter in port is not perfomed correctly FIXED R1881: CMM-OS alone takes 40% CPU usage, running with INCA3D CUP usage is 80%. Communication improved Modifications & Bug fixes (patch V ): R1941: Script to Deactivate/Activate probe head R1946: MZ1060 do not calculate probe vector until probe is open R1947: When call FARO calibration window with Faro USB arm, enable scan mode R1949: Counter functions: Since V1626 it is no more possible to reverse an axis then save it as an alignment file and load it in the operation sequence. The loaded alignment values are not OK. FIXED VDD_INCA3D_English_2007_01_23_V_1_6_2_8.doc Page 7 of 7 Form I3D-VDD001