24011 series, 3/2 Direct solenoid actuated poppet valve

Transcription

1 0 series, / > Port size: / (ISO G or NPT), NAMUR Interface > Add-on manual override or inductive limit switches on request > Main application: Single and double acting actuators > TÜV-approval based on type examination DGRL 0/68/EU and IEC 68, multichannel up to SIL ( years) > Suited for outdoor use under critical environment conditions. > Variable valve solenoid combination Technical features Medium: Compressed air, filtered, nonlubricated and dry. Other gase and liquid fluids on request. (Viscosity for gaseous or liquid fluids up to 0 mm /s) Operation: Direct solenoid operated poppet valve Operating pressure: bar ( psi) Orifice: 5 mm Flow: Gaseous fluids: 0 l/min Liquid fluids: Cv 0, Port size: G/, / NPT NAMUR Interface with integrated recirculation from the exhaust air to the acutator sping chamber Flow direction: Optional Mounting position: Any, but preferably with solenoid vertical Ambient/Media temperature: NBR: C ( F) FKM: C ( F) Water +95 C (+0 F) VMQ: C ( F) Depending on solenoid system Air supply must be dry enough to avoid ice formation at temperatures below + C (5 F). For outdoor installations must be protected all connections against the penetration of moisture and a solenoid with IP66 protection must be used! Materials: Body: Aluminium anodized (suitable for high humidity, sulphuric, sodium chloride or ammonia environments), brass.00 (Ms 58) or stainless steel.0 (6 L) Seal: FKM, NBR, VMQ Inner parts: stainless steel, brass Flow conversion: Cv US Gallon/min (water) = l/min (air) x 0,00 Kv m³/h (water) = l/min (air) x 0, Technical data Housing: Brass Symbol Port size Orifice (mm) Operating pressure (bar) (psi) Material Seat seal Manual override Test certificate IEC 68 0/68/EU Weight (kg) Drawing No. Solenoid group Model *) G/ NBR Not possible X 0,65 A + B 00 G/ NBR Push only X 0,70 A + B 007 G/ NBR Turn and lock 0,70 A + B 09 G/ NBR Not possible X X 0,65 A + B 09 G/ FKM Not possible X 0,65 A + B 06 G/ VQM Not possible X 0,65 A + B 05 G/ VQM Semi automatic X 0,70 A + B 05 / NPT NBR Not possible X X 0,65 A + B 08 / NPT NBR Push only X 0,70 A + B 08 / NPT NBR Turn and lock 0,70 A + B 06 / NPT NBR Semi automatic X 0,70 A + B 00 / NPT FKM Not possible X 0,65 A + B 0 / NPT VQM Not possible X 0,65 A + B 006 / NPT VQM Push only X 0,70 A + B 056 *) When ordering please indicate solenoid, voltage and current type (frequency). Particulary for valves with TÜV approval and attachment in plants based on safety standard IEC 65, taking into account to the operating and maintance instructions document 7. without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH /7 en

2 0 series, / Housing: Stainless steel Symbol Port size Operating pressure (bar) Material Seat seal Manual override Test certificate IEC 68 0/68/EU Weight (kg) Drawing No. Solenoid group Model *) G/ NBR Not possible X X 0,65 A + B 086 G/ FKM Not possible 0,70 A 07 *) G/ FKM Semi automatic 0,70 A 070 *) G/ FKM Not possible 0,70 A 09 *) G/ VMQ Not possible X 0,65 A 055 *) / NPT NBR Push only X X 0,65 A + B 0 / NPT FKM Turn and lock 0,70 A + B 06 / NPT FKM Not possible X 0,65 A + B 057 / NPT FKM Not possible 0,65 A 07 *) / NPT VMQ Not possible X 0,65 A 068 *) G/ NAMUR NBR Without X,00 A + B 096 G/ NAMUR VQM Without,00 A 0 G/ NAMUR NBR Without X X,00 A + B 05 *) / NPT NAMUR NBR Without X X,00 A + B 058 *) Housing: Aluminium anodized Symbol Port size Operating pressure (bar) Material Seat seal Manual override Test certificate IEC 68 0/68/EU Weight (kg) Drawing No. Solenoid group Model *) G/ NAMUR NBR Without X X 0,55 A + B 09 G/ NAMUR NBR Without X X 0,55 A + B 06 *) G/ NAMUR NBR Without 0,70 5 A + B 05 *5) / NPT NAMUR NBR Without X X 0,55 A + B 055 G/ NAMUR VQM Without X 0,55 A + B 0 G/ NAMUR NBR Without X X 0,55 A + B 009 *) *) When ordering please indicate solenoid, voltage and current type (frequency). *) Complete stainless steel version *) Port P in flange according to VDI/VDE 85 for attachment of positioners or to interlinking plate (see data sheet N/en ) *) Free of non-ferrous metals *5) Proximity switch Particulary for valves with TÜV approval and attachment in plants based on safety standard IEC 65, taking into account to the operating and maintance instructions document 7. en without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH /7

3 0 series, / Solenoids group A, standard voltages Power consumption V d.c. 0 V a.c. (W) (VA) Rated current V d.c. 0 V a.c. (m A) (m A) Protection class IP/NEMA 6,9 70 IP65 (with connector) 7, 75 IP65 (with connector) Ex-Protection (ATEX-Category) Temperature Ambient/ Media ( C) Media: +80 max Media: +80 max 8,9 69 IP Media: +0 0,0 IP Media: +0 8,9 69 IP Media: +0 0,0 IP Media: +0 8,9 69 IP66 (with II G Ex eb mb IIC T/T5 Gb II D Ex tb IIIC T0 C Db T: T5: Electrical connection Connector DIN EN 7-80, Form A *) Connector DIN EN 7-80, Form A *) Terminals, cable gland Pg,5 Terminals, cable gland Pg,5 m cable, encapsulated in EP resin m cable, encapsulated in EP resin Drawing Circuit diagram Model No. No M0 x,5 *) ,0 IP66 (with II G Ex eb mb IIC T/T5 Gb II D Ex tb IIIC T0 C Db T: T5: M0 x,5 *) ,9 69 IP66 (with II G Ex d mb IIC T/T6 Gb II G Ex e mb IIC T/T6 Gb II D Ex tb IIIC T0 C Db T: T6: / NPT *) ,0 IP66 (with II G Ex d mb IIC T/T6 Gb II G Ex e mb IIC T/T6 Gb II D Ex tb IIIC T0 C Db T: T6: / NPT *) ,9 69 IP66 (with II G Ex d mb IIC T/T6 Gb II G Ex e mb IIC T/T6 Gb II D Ex tb IIIC T0 C Db T: T6: M0 x,5 *) ,0 IP66 (with II G Ex d mb IIC T/T6 Gb II G Ex e mb IIC T/T6 Gb II D Ex tb IIIC T0 C Db T: T6: M0 x,5 *) ,9 69 IP66 (with II G Ex mb d IIC T/T6 II G Ex mb e II T/T6 T: T6: M0 x,5 *) ,0 IP66 (with II G Ex mb d IIC T/T6 II G Ex mb e II T/T6 T: T6: M0 x,5 *) ,6 567 x Cl. I, Div., Gr. A - D Cl. II/III, Div., Gr. E - G TC (60 C) 5,7 68 x Cl. I, Div., Gr. A - D Cl. II/III, Div., Gr. E - G TC (60 C) Flying leads length 60 mm Flying leads length 60 mm Standard voltages (±0%) V d.c., 0 V a.c., other voltages on request. Design according to VDE 0580, EN 0/08. 00% duty cycle. *) Connector/cable gland is not scope of delivery, see table»accessories«attention: The protection class for coil series 6xx and 8xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of protection is used, the solenoid will have protection class Ex e mb. Approvals Model Approvals Datasheet ATEX IECEx FM 8x CSA-LR N/en xx KEMA 98 ATEX 5 X IECEx KEM X N/en Approvals Model Approvals Datasheet ATEX IECEx 6xx PTB 0 ATEX 085 X IECEx PTB.009X N/en xx PTB 06 ATEX 05 X IECEx PTB X N/en /7 without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH en

4 0 series, / Solenoids group B, standard voltages Power consumption V d.c. 0 V a.c. (W) (VA) Rated current V d.c. 0 V a.c. (m A) (m A) Protection class IP/NEMA 6,8 8 IP65 (with connector) 0,6 6 IP65 (with connector) Ex-Protection (ATEX-Category) Temperature Ambient/ Media ( C) Electrical connection Connector DIN EN 7-80, form A *) Connector DIN EN 7-80, form A *),9 6 IP Media: +0 5, IP Media: +0,9 6 IP Media: +0 5, IP Media: +0,9 6 IP66 (with II G Ex eb mb IIC T/T6 Gb II D Ex tb IIIC T0 C Db T: T6: Drawing Circuit diagram Model No. No Terminals, cable gland Pg,5 9 0 Terminals, cable 9 6 gland Pg,5 m cable, 9 encapsulated in EP resin m cable, 9 6 encapsulated in EP resin M0 x,5 *) , IP66 (with II G Ex eb mb IIC T/T6 Gb II D Ex tb IIIC T0 C Db T: T6: M0 x,5 *) 6 7 6,9 6 IP66 (with II G Ex d mb IIC T/T6 Gb II G Ex e mb IIC T/T6 Gb II D Ex tb IIIC T0 C Db T: T6: / NPT *) , IP66 (with II G Ex d mb IIC T/T6 Gb II G Ex e mb IIC T/T6 Gb II D Ex tb IIIC T0 C Db T: T6: / NPT *) 7 66,9 6 IP66 (with II G Ex d mb IIC T/T6 Gb II G Ex e mb IIC T/T6 Gb II D Ex tb IIIC T0 C Db T: T6: M0 x,5 *) , IP66 (with II G Ex d mb IIC T/T6 Gb II G Ex e mb IIC T/T6 Gb II D Ex tb IIIC T0 C Db T: T6: M0 x,5 *) ,9 69 x Cl. I, Div., Gr. A - D Cl. II/III, Div., Gr. E - G TC (60 C) 9,5 x Cl. I, Div., Gr. A - D Cl. II/III, Div., Gr. E - G TC (60 C) Flying leads length 60 mm Flying leads length 60 mm Standard voltages (±0%) V d.c., 0 V a.c., other voltages on request. Design according to VDE 0580, EN 0/08. 00% duty cycle. *) Connector/cable gland is not scope of delivery, see table»accessories«attention: The protection class for coil series 6xx and 8xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of protection is used, the solenoid will have protection class Ex e mb. Approvals Model Approvals Datasheet ATEX IECEx FM 7x, 8x CSA-LR N/en xx KEMA 98 ATEX 5 X IECEx KEM X N/en xx PTB 0 ATEX 085 X IECEx PTB.009X N/en en without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH /7

5 0 series, / Partnumbers for international approval Land/Approval Coil/Code 8x xx 6xx 8xx Europa/ATEX Standard x x x International/IECEx Standard x x x China/NEPSI -0 x x Brasilien/INMETRO -0 x x Korea/KOSHA (only gas approval) -0 x x x Russland, Kasachstan & Weißrussland/TR-CU 0-0 x x x Indien/CCOE Standard x x Taiwan/ITRI Standard x x USA/FM Standard x Kanada/CSA Standard x Example: (Coil: 0; Voltage: V DC; Approval: TR-CU 0) Accessories Electrical connection Cable gland Protection class Ex e, Ex d (ATEX), Nickel plated brass/ Stainless steel Page 0 Ambient temperatur For solenoid Thread Cable ø (mm) Material Protection class (ATEX) limitation *7) Model xx M0 x,5 7,0,0 Plastic II G Ex e / II D Ex t See table xx M0 x,5 0,0,0 Plastic II G Ex e / II D Ex t See table xx M0 x,5 6,0,0 Plastic II G Ex e / II D Ex t See table xx M0 x,5 5,0 0,0 Plastic II G Ex e / II D Ex t See table xx M0 x,5 5,0 8,0 Nickel plated brass II G Ex e / II D Ex t xx M0 x,5 0,0,0 Nickel plated brass II G Ex d / II D Ex t xx / NPT 7,5,9 Nickel plated brass II G Ex d / II D Ex t xx, 8xx M0 x,5 9,0,0 Stainless steel.57 II G Ex e / II D Ex t xx, 8xx M0 x,5 7,0,0 Stainless steel.0 II G Ex d / II D Ex t xx, 8xx M0 x,5 0,0,0 Stainless steel.0 II G Ex d / II D Ex t *7) The limitation of the temperature range to the mentioned range is due to the self-heating of the solenoid. Connector DIN EN (form A) For solenoid x/6x x/7x Ambient temperatur limitation solenoid xx & *8) *8) T & Dust Ex: -5 C + 80 C T & Dust Ex: -0 C + 65 C T & Dust Ex: C T6: -5 C + 55 C T6: -0 C + 55 C T6: C T & Dust Ex: -5 C +65 C T & Dust Ex: -0 C + 6 C T & Dust Ex: C T5: -5 C + 55 C T5: -0 C + 55 C T5: C *8) Tested for the lower level of mechanical risk ( joule), an additional protection against impacts might be needed. /7 without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH en

6 0 series, / Connector for proximity switch -pin, 90 -pin, 90 -pin, straight -pin, straight Silencer *9) Exhaust guard *0) Page Page 058 ( m cable, -core) 05 (5 m cable, -core) 056 (without cable) Page 057 ( m cable, -core) 05 (5 m cable, -core) Page Page Page 055 (without cable) C/S (/ NPT) 06 (G/, / NPT) M/S (G/) Add-on manual override *) Without detent with detent Manual Override The manual override is meant to be used for system testing. Upon de-energisation of the coil the valve returns to rest position by mechanical spring force (for testing only prior to commissioning). Page 8 Page *9) For indoors use *0) For outdoors use, opening pressure 0, bar *) Add on for NAMUR valves always possible, Inline on request Using the manual override with detent cancels the SIL-Approval! Semi automatic/manual reset Function: The valve does not switch after energisation of the coil. It will only operate if the reset button is being pushed. The valve will then, by means of the coil voltage, be held in its switching position even if the reset button is being released. It will return to rest position when the coil is being de-energised. Allowable voltage tolerance: +/- 0%. NAMUR accessories (G/ only) Throttle control plate *) Flange plate Yoke Mounting plate Quick exhaust module *) Page Page & Page (NAMUR single connection plate) (montage in combination with ) 0679 (NAMUR-rip use in combination with 06790) *) The throttle control plate 009 has a minimum flow rate for safety reason. *) Technical details see catalogue page en Page Page 065 (90 ) 08 en without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH /7

7 0 series, / Drawings Valves Dimensions in mm Projection/First angle , ,5, ,5 6, ,5 9 G/ ø ø 9,5 7,5,5 6,5,5 6,5 6 7 Port size G/ or / NPT mm deep /7 without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH en

8 0 series, / Dimensions in mm Projection/First angle 6,5 ø 0 M6 9 5,5 5 7,5 ø ø 9,5, ,5 9 ø ø 9,5 8 6,5 5,5 7,5 6,5,5 6,5 6 7 Port size G/ or / NPT mm deep Add-on manual override Without detent Model: With detent Model: ,5 Please note: add-on manual override for NAMUR valves provided only for commissioning and tests 9 8,5 9 9,5 9 ø 6 6, ,5, ,5 6,5, Proximity switch Technical features Supply voltage (Ub): 7, V d.c. Ripple: 5% Frequency of operating cycles: 000 Hz Protection class: IP68 Pressure-resistant: 0 bar (75 psi) Ambient temperature: C ( F) pnp Rv + Port size G/ or / NPT mm deep Proximity switch 6 Thread M x en without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH /7

9 0 series, / Solenoids Weight: 0,7 kg 86,5 Weight: 0, kg 96,5 Dimensions in mm Projection/First angle 9 6,5 59 0,5 7 M6 x,5 8 0,5 8 M6 x, Weight: 0,6 kg 7 Weight: 0,7 kg 70,5 07 0,5,5 6, , Weight: 0,8 kg 9 Weight: 0,7 kg / NPT 5 0, ,5,5 0,5 6 0 Connector can be indexed by x90 ø 6 or (with spacer tube) M0 x,5 or / NPT Flying leads AWG 8 (60 mm long) 5 With cable gland, Pg,5 /7 without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH en

10 0 series, / 0 Weight:, kg ø 6 M0 x, Circuit diagrams T T Cable gland A B C ø D Model C B A D C B only A D M0 x, ,0..., M0 x,5 0 0,0..., M0 x, ,0..., M0 x,5 0 9,5 5,0... 0, M0 x, ,0... 8, M0 x,5 7 9,0, / NPT ,5..., M0 x,5 6,5 7,5 9,0..., M0 x, ,0, M0 x,5 6 0,0, en without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH /7

11 0 series, / NAMUR hole pattern (actuator side) NAMUR quick exhaust module for a better kv-value by exhaust see data sheet NAMUR interlinking plates in redundancy design for»safety exhausting«and»safety ventilating«see data sheet () Coding stud threaded 8 mm deep Accessories Silencer Exhaust guard Model: M/S, C/S Model: 06 Dimensions in mm Projection/First angle,5 8 6,5 0 ø / ø / Single connection plate Model: (x) Mounting plate Model: 065 (90 ) () G/ 9, ,5 0 ø 9,5 9 ø G/ ø 9 ø,5 () ,5 /7 without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH en

12 0 series, / NAMUR slot Yoke Throttle control plate Model: 0679 Model: Model: 009 Dimensions in mm Projection/First angle 9,5 x , ,5 M 5 60 Quick exhaust module Typ: 08 5 G/8 8 0 G/8 ø 5.5 ø ø 5.5 G/ Flanged surface NAMUR or externally mounted valve Flanged surface NAMUR actuator Push-in threaded piece after plate mounting (to secure correct position) 8 mm deep 5 Flow regulator retrofittable en without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH /7

13 0 series, / Connector 90, pin, with PUR cable 90, pin, without cable Dimensions in mm Projection/First angle 5 5 B B,5 0,5 Pg7 Pg7 ø 5 ø B ø 0 B 7 ø 5 ø 5 ø 0 B C ød ød F Wire x dim. Cable length (m) Weight (g) Model M x,5 5 7 x 0, mm M x,5 5 7 x 0, mm B C ød E F Weight Model (g) M x 0,5 0 Pg Straight, pin, with PUR cable Straight, pin, without cable 0 0,5 B C ød ød Wire x dim. Cable length (m) Weight (g) Model M x 0 5 x 0, mm M x 0 5 x 0, mm B C ød E Weight Model (g) M x 0,5 0 Pg Warning These products are intended for use in industrial compressed air and fluid systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult IMI Precision Engineering, Norgren GmbH. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. Functional safety (SIL): Suitable for certain applications can only be evaluated through examination of each safety-related overall system with regard to the requirements of IEC 68/65. /7 without notice, the specifications given in this document. (00-5h) 05 Norgren GmbH en