Common Mode Noise Filter. LCFE Series. Description. Features. Applications. 1210mm Size. Source Meter. LCR Meter (3GHz) Source Meter.

Size: px

Start display at page:

Download "Common Mode Noise Filter. LCFE Series. Description. Features. Applications. 1210mm Size. Source Meter. LCR Meter (3GHz) Source Meter."

Dominick Pearson
5 years ago
Views:

Description This specification covers the engineering requirements for both Common Mode Noise Filter (CMF) and ESD Protection, especially high speed differential serial interfaces, such as USB 3.

1 Description This specification covers the engineering requirements for both Common Mode Noise Filter (CMF) and ESD Protection, especially high speed differential serial interfaces, such as USB 3., USB 3., MIPI D-PHY or HDMI. Pinout 65mm Size Item Description Equipment Rdc Pin -4, 2-3 CM Impedance IL IR CR Pin2 Pin Pin -2(Short) to Pin 3-4(Short) Pin 5 or 6 to Pin,2,3,4 Pin -2 or Pin 3-4 Pin6 Pin5 ma DC 5mV Pin3 Pin4 LCR Meter (3GHz) Features Effective for suppressing common mode noise and almost no effect for high speed differential data line Differential mode cut-off frequency up to.5ghz at -3dB One common mode filters and two ESD suppression devices integrated Ultra low profile as low as.68x.55x.35mm Applications Mobile Phone and Tablet USB 3. Gen and 2 (5 and Gbps) with Type C Display Port.2 (5.4Gbps) HDMI 2. (6.Gbps) MDDI, MIPI, MHL 2mm Size Pin2 Pin Pin6 Ceramic multilayer type SMD component Non-polarized product Conforming to RoHS directive ±5kV air, ±8kV contact ESD protection (IEC Level 4) High temperature soldering guaranteed: 26 C/ seconds Portable/Wearable Devices Game console, POS, VR, Dongle Consumer Products PDP, LCD TV, DVD Player, PC, Audio player, DSC, Set top box, Laptop, SSD, Home Automation, IoT module Pin3 Pin4 86mm Size Item Description Equipment Rdc Pin -3, 2-4 CM Impedance IL IR CR Pin5 Pin Pin3 Pin -2(Short) to Pin 3-4(Short) Pin 5 or 6 to Pin,2,3,4 Pin -2 or Pin 3-4 Pin2 Pin4 ma DC 5mV Pin6 LCR Meter (3GHz) Item Description Equipment Rdc Pin -4, 2-3 CM Impedance IL IR CR Pin5 Pin -2(Short) to Pin 3-4(Short) Pin 5 or 6 to Pin,2,3,4 Pin -2 or Pin 3-4 ma DC 5mV LCR Meter (3GHz)

2 68mm Size 22mm Size (LCFE222A9TG, LCFE222A2TG) Pin Pin2 Pin3 Pin4 Pin6 Pin Pin3 Pin9 Pin Pin2 Pin4 Item Description Equipment Rdc CM Impedance IL Pin8 Pin7 Pin6 Pin5 Pin -8, 2-7, 3-6, 4-5 Pin -2(Short) to Pin 8-7(Short) Pin 3-4(Short) to Pin 6-5(Short) Pin 9 or to Pin ~4 or 5~8 ma DC 5mV LCR Meter (3GHz) Pin5 Item Description Equipment Rdc Pin -3, 2-4 CM Impedance IL IR CR Pin -2(Short) to Pin 3-4(Short) Pin 5 or 6 to Pin,2,3,4 Pin -2 or Pin 3-4 ma DC 5mV LCR Meter (3GHz) 38mm Size Pin Pin2 Pin3 Pin4 Pin5 Pin6 22mm Size (LCFE224ATG) Pin Pin2 Pin3 Pin4 Pin3 Pin4 Pin9 Pin Pin2 Pin Pin Pin9 Pin8 Pin7 Pin8 Pin7 Pin6 Pin5 Item Description Equipment Rdc CM Impedance IL Pin -2, 2-, 3-, 4-9, 5-8, 6-7 Pin -2(Short) to Pin 2-(Short) Pin 3-4(Short) to Pin -9(Short) Pin 5-6(Short) to Pin 8-7(Short) Pin 3 or 4 to Pin ~6 or 7~2 ma DC 5mV LCR Meter (3GHz) Item Description Equipment Rdc CM Impedance IL Pin -8, 2-7, 3-6, 4-5 Pin -2(Short) to Pin 8-7(Short) Pin 3-4(Short) to Pin 6-5(Short) Pin 9 or to Pin ~4 or 5~8 ma DC 5mV LCR Meter (3GHz)

3 6 Functional Block Diagram LCFE652A2TG, LCFE652A35TG, LCFE652A65TG, LCFE22A2TG, LCFE22A35TG, LCFE22A5TG, LCFE22A65TG, LCFE22A9TG, LCFE22H9TG LCFE684A8TG, LCFE684A35TG, LCFE684A55TG, LCFE684A75TG, LCFE684HTG, 5 LCFE224ATG ~ : Data Line; and :Ground ~ : Data Line; and :Ground LCFE862A2TG, 9 LCFE862A25TG, LCFE862W5TG, LCFE862A75TG, LCFE862A9TG, LCFE862H9TG, LCFE862G9TG, LCFE222A9TG, LCFE222A2TG 5 LCFE386A75TG ~ : Data Line; and :Ground ~ 2 : Data Line; 3 and 4 : Ground

4 Electrical Characteristics Part Number Size (mm) Size (inch) Common Mode Rated Current (ma) Max. Cut-off Freq/ GHz DC Resistance (Ω) Max. Number of Lines Leakage Current (μa) Max. Capacitance (pf) Insulation Resistance (MΩ) Min. LCFE652A2TG (±3%) LCFE652A35TG (±25%) LCFE652A65TG (±25%) LCFE862A2TG (±3%) LCFE862A25TG (±25%) LCFE862W5TG (±25%) LCFE862A75TG (±25%) LCFE862A9TG (±25%) LCFE862H9TG (±25%) LCFE862G9TG (±25%) LCFE22A2TG (±3%) LCFE22A35TG (±25%) LCFE22A5TG (±25%) LCFE22A65TG (±25%) LCFE22A9TG (±25%) LCFE22H9TG (±25%) LCFE684A8TG (±3%) LCFE684A35TG (±3%) LCFE684A55TG (±25%) LCFE684A75TG (±25%) LCFE684HTG (±25%) LCFE222A9TG (±25%) LCFE222A2TG (±25%) LCFE224ATG (±25%) LCFE386A75TG (±25%) Rated Voltage (V) Test Conditions Common Mode DC Resistance (Ω): 25ºC±2ºC Leakage Current (μa): 5V Capacitance (pf) Insulation Resistance (Max. MΩ): 5V Rated Voltage (V): 25ºC±2ºC Rated Current (ma): 25ºC±2ºC

5 Impedance Curves - 65mm Size Common Mode Differencial Mode k k LCFE652A2TG LCFE652A35TG LCFE652A65TG k k LCFE652A2TG LCFE652A35TG LCFE652A65TG Transmission Characteristics (S-parameter) Common Mode S2 Insertion Loss(dB) LCFE652A2TG LCFE652A35TG LCFE652A65TG -33 Frequency(Hz) Differencial Mode S2 Insertion Loss(dB) LCFE652A2TG LCFE652A35TG LCFE652A65TG -33 Frequency(Hz)

6 Impedance Curves - 86mm Size Common Mode Differencial Mode k k ICMEF62P2MFR ICMEF62P25MFR ICMEW62P5MFR ICMEF62P75MFR ICMED62P9MFR ICMEG62P9MFR k k ICMEF62P2MFR ICMEF62P25MFR ICMEW62P5MFR ICMEF62P75MFR ICMED62P9MFR ICMEG62P9MFR Transmission Characteristics (S-parameter) Common Mode S2 Insertion Loss(dB) ICMEF62P2MFR ICMEF62P25MFR ICMEW62P5MFR ICMEF62P75MFR ICMED62P9MFR ICMEG62P9MFR -65 Frequency(Hz) Differencial Mode S2 Insertion Loss(dB) ICMEF62P2MFR ICMEF62P25MFR ICMEW62P5MFR ICMEF62P75MFR ICMED62P9MFR ICMEG62P9MFR -65 Frequency(Hz)

7 Impedance Curves - 2mm Size Common Mode Differencial Mode k k LCFE22A2TG LCFE22A35TG LCFE22A5TG LCFE22A65TG LCFE22A9TG LCFE22H9TG k k LCFE22A2TG LCFE22A35TG LCFE22A5TG LCFE22A65TG LCFE22A9TG LCFE22H9TG m m Transmission Characteristics (S-parameter) Common Mode S2 Insertion Loss (db) -5 - LCFE22A2TG -5 LCFE22A35TG -2 LCFE22A5TG -25 LCFE22A65TG LCFE22A9TG -3 LCFE22H9TG Differencial Mode S2 Insertion Loss (db) -5 - LCFE22A2TG -5 LCFE22A35TG -2 LCFE22A5TG -25 LCFE22A65TG LCFE22A9TG -3 LCFE22H9TG

8 Impedance Curves - 68mm Size Common Mode k k LCFE684A75TG LCFE684A8TG LCFE684A35TG LCFE684HTG LCFE684A55TG Differencial Mode k k LCFE684A75TG LCFE684A8TG LCFE684A35TG LCFE684HTG LCFE684A55TG m m Transmission Characteristics (S-parameter) Common Mode S2 Insertion Loss(dB) LCFE684A75TG LCFE684A8TG LCFE684A35TG LCFE684HTG LCFE684A55TG -65 Frequency(Hz) Differencial Mode S2 Insertion Loss(dB) LCFE684A75TG LCFE684A8TG LCFE684A35TG LCFE684HTG LCFE684A55TG -65 Frequency(Hz)

9 Impedance Curves - 22mm Size Common Mode Differencial Mode k k LCFE222A2TG LCFE222A9TG LCFE224ATG k k LCFE222A2TG LCFE222A9TG LCFE224ATG Transmission Characteristics (S-parameter) Common Mode S2 Insertion Loss(dB) LCFE222A2TG LCFE222A9TG LCFE224ATG -33 Frequency(Hz) Differencial Mode S2 Insertion Loss (db) LCFE222A2TG LCFE222A9TG LCFE224ATG -33

10 Impedance Curves - 38mm Size Common Mode Differencial Mode k LCFE386A75TG k LCFE386A75TG k k Transmission Characteristics (S-parameter) Common Mode S2 Insertion Loss(dB) LCFE386A75TG -33 Frequency(Hz) Differencial Mode S2 Insertion Loss(dB) LCFE386A75TG -33 Frequency(Hz)

11 Temperature Common Mode Noise Filter Soldering Parameters Reflow Condition Pre Heat T S(max) to TL - Ramp-up Rate Peak Temperature (T P) - Temperature Min (T s(min)) - Temperature Max (T s(max)) - Time (Min to Max) (t s) Average Ramp-up Rate (Liquidus Temp (T L) to peak) Reflow - Temperature (T L) (Liquidus) - Temperature (t L) Pb-free assembly 6 C 85 C 2 seconds C/second max C/second max 22 C 3 5 seconds 26 C T P T L T S(max) T S(min) 25 Preheat t S time to peak temperature (t 25ºC to peak) Ramp-up t P t L Critical Zone TL to TP Ramp-down Time Time within 5 C of actual peak Temperature (t p) 5~ seconds Recommended Soldering Profile ( Lead free condition) Ramp-down Rate 2 C/second max Time 25 C to Peak Temperature (T P) 4 minutes max Do not exceed 26 C Wave Soldering 26 C, sec. max Product Characteristics Lead Pull Strength Solderability Soldering Heat Resistance Operating Temperature Climatic Category 5N 26ºC, s (Reflow), Max 38ºC, 5s (Soldering iron) Max 26ºC sec(wave), Max Temperature: Max 38ºC (Max 5sec) -4ºC to +85ºC -4ºC to +85ºC/8 days Stock Conditions -ºC + 4ºC RH, 7% Vibration Resistance 5 g s for 2 minutes, 2 cycles each of 3 orientations

12 Dimensions Unit = mm 65mm Size Recommended Footprint and Stencil Mask Unit = mm Stencil Mask T =.mm 65mm Size 86mm Size 86mm Size 2mm Size 2mm Size 68mm Size 68mm Size

13 Dimensions Unit = mm Recommended Footprint and Stencil Mask Unit = mm Stencil Mask T =.mm 22mm Size (LCFE222A9TG, LCFE222A2TG) 22mm Size (LCFE224ATG) 38mm Size

14 Carrie Tape Dimensions 65mm size Tape and Reel Dimension 65mm size COVER TAPE Dimensions Symbol Millimeters A.62±.3 B.78±.3 E.75±.5 F 3.5±.5 D.55±.3 P 2.±.5 P2 2.±.5 P 4.±.5 P 4.±. W 8.±. T.4±.2 T.43±.5 W TAPE REEL BACK (BOTTOM) TAPE E D C B R Empty Section Empty Section Leading Section Chip Mounting Section 45 PITCH 5 PITCH 35 PITCH A t () Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø78) - PE Tape:,pcs Code A B C D E W T R Dimension Ø78±2 Min. Ø5 Ø3±.5 Ø2±.8 2.±.5 ±.5.8±.2.

15 Carrie Tape Dimensions 86mm size Tape and Reel Dimension 86mm size COVER TAPE Dimensions Symbol Millimeters A.8±.3 B.2±.3 E.75±.5 F 3.5±.5 D.55±.3 P 2.±.5 P2 2.±.5 P 4.±.5 P 4.±. W 8.±. T.6±.2 T.63±.5 W TAPE REEL BACK (BOTTOM) TAPE E D C B R Empty Section Empty Section Leading Section Chip Mounting Section 45 PITCH 5 PITCH 35 PITCH A t () Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø78) - PE Tape:,pcs Code A B C D E W T R Dimension Ø78±2 Min. Ø5 Ø3±.5 Ø2±.8 2.±.5 ±.5.8±.2.

16 Carrie Tape Dimensions 2mm size t FEEDING HOLE A B CHIP INSERTING HOLE D P P2 P E F W Symbol Dimensions Millimeters A.5±.5 B.5±.5 W F 3.5±.5 E.75±.5 P 4.±. P2 2.±.5 P 4.±.5 D.55±.3 T.75±.5 Tape and Reel Dimension 2mm size COVER TAPE W TAPE REEL BACK (BOTTOM) TAPE E D C B R Empty Section Empty Section Leading Section Chip Mounting Section 45 PITCH 5 PITCH 35 PITCH A t () Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø78) - PE Tape: 4,pcs Code A B C D E W T R Dimension Ø78±2 Min. Ø5 Ø3±.5 Ø2±.8 2.±.5 ±.5.8±.2.

17 Carrie Tape Dimensions 68mm size t FEEDING HOLE A B CHIP INSERTING HOLE D P P2 P E F W Symbol Dimensions Millimeters A.97±.3 B.8±.3 W 8.±. F 3.5±.5 E.75±.5 P 4.±. P2 2.±.5 P 4.±.5 D.55±.3 T.58±.3 Tape and Reel Dimension 68mm size COVER TAPE W TAPE REEL BACK (BOTTOM) TAPE E D C B R Empty Section Empty Section Leading Section Chip Mounting Section 45 PITCH 5 PITCH 35 PITCH A t () Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø78) - PE Tape: 4,pcs Code A B C D E W T R Dimension Ø78±2 Min. Ø5 Ø3±.5 Ø2±.8 2.±.5 ±.5.8±.2.

18 Carrie Tape Dimensions 22mm size t FEEDING HOLE A B CHIP INSERTING HOLE D P P2 P E F W Symbol Dimensions Millimeters A.55±.5 B 2.3±.5 W 8.±. F 3.5±.5 E.75±.5 P 4.±. P2 2.±.5 P 4.±. D.55±.3 T.95±.5 Tape and Reel Dimension 22mm size COVER TAPE W TAPE REEL BACK (BOTTOM) TAPE E D C B R Empty Section Empty Section Leading Section Chip Mounting Section 45 PITCH 5 PITCH 35 PITCH A t () Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø78) - PE Tape: 4,pcs Code A B C D E W T R Dimension Ø78±2 Min. Ø5 Ø3±.5 Ø2±.8 2.±.5 ±.5.8±.2.

19 Carrie Tape Dimensions 38mm size t FEEDING HOLE A B CHIP INSERTING HOLE D P P2 P E F W Symbol Dimensions Millimeters A.5±.5 B 3.3±.5 W 8.±. F 3.5±.5 E.75±.5 P 4.±. P2 2.±.5 P 4.±. D.55±.3 T.6±.5 Tape and Reel Dimension 38mm size COVER TAPE W TAPE REEL BACK (BOTTOM) TAPE E D C B R Empty Section Empty Section Leading Section Chip Mounting Section 45 PITCH 5 PITCH 35 PITCH A t () Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø78) - PE Tape: 4,pcs Code A B C D E W T R Dimension Ø78±2 Min. Ø5 Ø3±.5 Ø2±.8 3.±.5 ±.5.3±.2.±.2

20 Operating Temperature Climatic Category Stock Condition Vibration Resistance -4 C to +85 C (Consider re-rating) -4 C / +85 C / 2days (IEC668-,-2-,-2-2,-2-78) + C to +6 C relative humidity 75% yearly average, without dew, maximum value for 3 days-95% 24 cycles at 5min. Each (IEC ) - 6 Hz at.75 mm amplitude 6-2 Hz at g acceleration Common Mode Noise Filter Part Numbering System Part Numbering System Function Common Mode Noise Filter with ESD Protection Series and Dimensions (L x W x T, mm ).68 x.55 x.35 Number of Lines Internal Code Common Mode Impedance (@MHz), 2 = 2Ω Tape and Reel Green LCFE 65 2 A 2 T G Ordering Information Part Number Reel Quantity LCFE65xxxxxxx/LCFE86xxxxxxx, LCFE68xxxxxxx/LCFE2xxxxxxx 4, LCFE22xxxxxxx/LCFE38xxxxxxx 4, Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at Quantity Quantity & Packaging Code Taping Width,4,4 DB DB N/A N/A,4 DB N/A,4 DB N/A

SP5001 Series 4 Channel TVS Common Mode Filter

SP5001 Series 4 Channel TVS Common Mode Filter Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel TVS Common Mode Filter RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF providing both ESD protection