COMBIFIX. Insex. - high quality furniture fittings

Transcription

1 OMIIX Insex

2 The technical descriptions and dimensions in this catalogue, also those with the photographs and drawings, are not binding. We reserve the right to make design improvements. We bear no liability for any misprints or other errors that might occur in the production of the catalogue. SISO /S tager forbehold for trykfejl samt ændringer i produktets specifikationer. ür ruckfehler und Irrtümer ist jede Haftung ausgeschlossen. Produktänderungen behalten wir uns vor. SISO /S MILPRKN 11 K SKOVLUN (OPNHN) NMRK PHON: (+45) X: (+45) ISTRIUTOR

3 ONTNT ONTNTS OMIIX HS 4 ITN SRWS & OLTS 9 ROSS OWLS 10 INSX SRWS & MUSHROOM SRWS 11 INSX OVRS & INSX OLLRS 12 INSX OLLRS, RILL IT & LOTIN PINS 13 INSX KYS & WSHRS 14 HX NUTS, WRNH KY & NILS 15 USHINS 16 SRWS 21 HNROLTS & TOOL OR INSRTIN 23 3

4 RSS OMIIX HS RSS OMIIX H #1106 M6 WITHOUT OLLR rass inish: rass, Natural No collar but with 5 mm open hex hole 1 0 Ø13 mm 0 mm 10 mm M6 5 mm Ø12 mm 5 mm # RSS OMIIX H #1007 M6 W/OPN HX HOL rass inish: rass, Natural lat head with 5 mm open hex hole Ø12 mm 2 mm 10 mm M6 5 mm Ø8 mm 7 mm # RSS OMIIX H #1011 M6 W/OPN HX HOL inish: rass rass, Natural lat head with 5 mm open hex hole Ø15 mm 2,25 mm 9 mm M6 5 mm Ø9 mm 7 mm # RSS OMIIX H #1011 M6 W/LOS HX HOL inish: rass rass Plated (PL) or Nickel Plated (NPL) lat head with 5 mm closed hex hole NPL PL Ø15 mm 2 mm 10 mm M6 5 mm Ø 9 mm 7 mm # # RSS OMIIX H #1012 M6 W/OPN HX HOL rass or Stainless Steel (SS) ISI 304 inish: rass, Natural and SS, Natural lat head with 4 or 5 mm open hex hole SS rass Ø15 mm 2,25 mm 11,75 mm M6 5 mm Ø9 mm 8,5 mm on request # Ø15 mm 2,25 mm 11,75 mm M6 4 mm Ø9 mm 7 mm # on request 4

5 RSS OMIIX HS RSS OMIIX H #1012 M6 W/LOS HX HOL inish: rass rass Plated (PL) or Nickel Plated (NPL) lat head with 5 mm closed hex hole NPL PL Ø15 mm 2 mm 12 mm M6 5 mm Ø9 mm 7 mm # # RSS OMIIX H #1013 M6 W/OPN HX HOL rass inish: rass, Natural lat head with 5 mm open hex hole SS rass Ø15 mm 2,25 mm 18 mm M6 5 mm Ø9 mm 12 mm # # RSS OMIIX H #1013 M6 W/LOS HX HOL inish: rass rass Plated (PL) or Nickel Plated (NPL) lat head with 5 mm closed hex hole NPL PL Ø15 mm 2 mm 18 mm M6 5 mm Ø9 mm 13 mm # # RSS OMIIX H #1015 M6 W/OPN HX HOL rass or Stainless Steel (SS) ISI 304 inish: rass, Natural and SS, Natural ome head with 5 mm open hex hole SS rass Ø13 mm 2,50 mm 10,50 mm M6 5 mm Ø8 mm 9 mm # #

6 RSS OMIIX HS RSS OMIIX H #1015 M6 W/LOS HX HOL inish: rass rass Plated (PL) or Nickel Plated (NPL) ome head with 5 mm closed hex hole NPL PL Ø13 mm 3 mm 10 mm M6 5 mm Ø8 mm 6 mm # # RSS OMIIX H #1031 M6 W/OPN HX HOL inish: rass rass, Natural lat head with 5 mm open hex hole Ø19 mm 2 mm 12 mm M6 5 mm Ø9 mm 10 mm # RSS OMIIX H #1042 M6 W/OPN HX HOL inish: rass rass, Natural lat head with 5 mm open hex hole Ø19 mm 2 mm 8 mm M6 5 mm Ø9 mm 6,5 mm # RSS OMIIX H #1046 M6 W/OPN HX HOL inish: rass rass, Natural ome head with 5 mm open hex hole 6 Ø19 mm 3 mm 10 mm M6 5 mm Ø9 mm 7,5 mm #

7 RSS & STL OMIIX HS RSS OMIIX H #1060 M8 W/OPN HX HOL inish: rass rass, Natural ome head with 5 mm open hex hole Ø17 mm 2,50 mm 11,5 mm M8 5 mm Ø10 mm 8 mm # RSS OMIIX H #1062 M8 W/OPN HX HOL inish: rass rass, Natural ome head with 5 mm open hex hole Ø30 mm 4 mm 7 mm M8 5 mm Ø12 mm 6 mm # STL OMIIX H # -563 M6 W/LOS HX HOL inish: Steel rass Plated (PL) or Yellow Zinc Plated 12 micron (YZP) lat head with 4 or 5 mm closed hex hole PL YZP Ø15 mm 2 mm 12 mm M6 4 mm Ø9 mm 7 mm # # Ø15 mm 2 mm 12 mm M6 5 mm Ø9 mm 7 mm # on request Ø15 mm 2 mm 18 mm M6 4 mm Ø9 mm 13 mm on request # Ø15 mm 2 mm 18 mm M6 5 mm Ø9 mm 13 mm # on request STL OMIIX H # -564 M6 W/LOS HX HOL inish: Steel rass Plated (PL) or Nickel Plated (NPL) ome head with 5 mm closed hex hole NPL PL Ø15 mm 2,5 mm 12 mm M6 5 mm Ø9 mm 7 mm # on request Ø15 mm 2,5 mm 15 mm M6 5 mm Ø9 mm 10 mm on request #

8 STL OMIIX HS STL OMIIX H # -597 M6 W/LOS HX HOL inish: Steel rass Plated (PL) or lack oxidized (LK) (other finishes on request) ome head with 5 mm closed hex hole PL LK Ø20 mm 3 mm 18 mm M6 5 mm Ø9 mm 12 mm # # STL OMIIX H # -637 M6 W/LOS HX HOL inish: Steel Yellow Zinc Plated 2-3 micron (YZP) (other finishes on request) ome head with 5 mm losed hex hole YZP Ø15 mm 4 mm 8 mm M6 5 mm Ø8 mm 5 mm # STL OMIIX H # -595 M8 W/LOS HX HOL inish: Steel rass Plated (PL), lack oxidized (LK) ronze Plated (RZ) or Nickel Plated (NPL) ome head with 5 mm closed hex hole PL LK Ø20 mm 3 mm 16 mm M8 5 mm Ø10 mm 12 mm # # NPL RZ Ø20 mm 3 mm 16 mm M8 5 mm Ø10 mm 12 mm # # STL OMIIX H # -602 M10 W/LOS HX HOL inish: Steel Nickel Plated (NPL) (other finishes on request) ome head with 5 mm closed hex hole NPL Ø20 mm 4 mm 13 mm M10 5 mm Ø13 mm 9 mm #

9 ITN SRWS & OLTS THR OLTS Thread: Lengths: Steel, Yellow Zinc Plated (other finishes on request) Stainless Steel, Natural rass, Natural M6 or M8 rom 18 up to 1000 mm etc. Steel, (YZP) ITN SRWS Steel, Yellow Zinc Plated (other finishes on request) Stainless Steel ISI 316 rass, Natural Stainless Steel ISI 316 Head size: Ø15 x 2,5 mm. (Ø13 & 17 mm on request) Steel, (YZP) Hex size: 4 mm Thread: M6 (M8 on request) Lengths: 25/30/35/40/45/50/60/70/80/90/100 & 120 mm With 3mm point or conical (see illustration) etc. onical Point ITN WOO SRWS Steel, Yellow Zinc Plated (other finishes on request) Stainless Steel ISI 316 Head size: Ø15 x 2,5 mm Hex size: 4 mm Thread: Ø6,3 mm Lengths: 40/50/60 and 70 mm (other sizes on request) Steel, (YZP) With point (see illustration) # etc. Point 9

10 ROSS OWLS ROSS OWLS Steel, rass or Stainless Steel Stainless Steel right Zinc Plated inish: With slot Steel, Yellow Zinc Plated (YZP) right Zinc Plated (ZP), rass, Natural Stainless Steel, (SS), Natural Yellow Zinc Plated * istance from centre of hole to edge. rass * Material inish M6 Ø10 mm 13 mm 8/5 mm Steel Plain # M6 Ø10 mm 14 mm 8/6 mm Steel ZP/YZP # /31 M6 Ø10 mm 14 mm 8/6 mm rass Natural # M6 Ø10 mm 14 mm 8/6 mm SS Natural # M6 Ø10 mm 16 mm 10/6 mm Steel YZP # M6 Ø10 mm 18 mm 12/6 mm Steel YZP/ZP # /328 M6 Ø10 mm 30 mm 20/10 mm Steel ZP # M6 Ø10 mm 20 mm 10/10 mm Steel ZP/YZP # /071 M6 Ø10 mm 25 mm 12,5/12,5 mm Steel ZP # M6 Ø10 mm 30 mm 15/15 mm Steel ZP # M6 Ø10 mm 40 mm 20/20 mm Steel ZP # M6 Ø10 mm 45 mm 22,5/22,5 mm Steel ZP # M8 Ø12 mm 20 mm 10/10 mm Steel YZP # M8 Ø12 mm 25 mm 12,5/12,5 mm Steel ZP # M8 Ø12 mm 30 mm 15/15 mm Steel YZP # M8 Ø12 mm 50 mm 25/25 mm Steel ZP/YZP # /92 M8 Ø12 mm 60 mm 30/30 mm Steel ZP # ROSS OWL NO W/2 HOLS Steel inish: With slot Steel, right Zinc Plated (ZP) * istance from centre of hole to edge. right Zinc Plated * Material inish M6 Ø10 mm 60 mm 14 mm c.c. 32 mm Steel ZP # M6 Ø10 mm 60 mm 10 mm c.c. 40 mm Steel ZP # M6 Ø10 mm 82 mm 9 mm c.c. 64 mm Steel ZP #

11 INSX SRWS & MUSHROOM SRWS MUSHROOM SRWS Head size: Hex size: Thread: Lengths: Steel, Yellow Zinc or lack Oxidized Other materials & finishes on request Ø15 mm 4 mm (5 mm on request) M6 (M8 on request) 12/16/20/23/30/32/38/45/50/60/63/90 mm (other lengths on request) lunt (Point on request) # etc. lunt INSX SRWS Head size: Hex size: Thread: Lengths: Steel, Yellow Zinc, rass Plated or lack Oxidized Other materials & finishes on request Ø12 x 4 mm (counter sunk) 4 mm M6 (M8 and M10 on request) 32/35/38/44/50/51/57/60/63/76/90/100/120/126 mm (other lengths on request) Pointed or blunt (see illustration) # etc. Point lunt 11

12 INSX OVRS & INSX OLLRS INSX OVR PS Ø12 Ø4,2 Head size: Pin: Plastic, black, white, beige (other colours on request) Ø12mm, ome Ø4,2 mm for 4 mm hex hole etc. INSX WOO PLUS 5,50 Size: Teak wood (other wood types on request) Ø13,5 x 5,5 m Ø 13, ,5 INSX OLLRS - RSS Ø 6,4 Ø 13 Size: rass Ø13 x 4,5 mm x M6 rass Natrual # rass lack Oxidized # rass Nickel Plated # INSX OLLRS - STL Steel, Yellow Zinc Ø 6,4 Ø 13 5,5 Size: Ø13 x 5,5 mm x M6 # INSX OLLRS - NYLON Nylon, lack Ø 6,4 Ø 12,7 4,5 Size: Ø12,7 x 4,5 mm X M6 #

13 INSX OLLRS, RILL IT & PINS INSX OLLRS - STL W/SHT Ø20 Steel, Yellow Zinc 2,40 Size: Ø20 x 16 mm x M6 # mm RILL IT /INSX SRWS & OLLRS Ø6 Ø9 Twin set boring bits for ø7mm and Ø13mm in one operation # LOTIN PINS 7 13 adjustable rass Size: Ø8 x 21,5 mm inish: Natural : Male # emale # Steel Size: Ø8 x 22 mm inish: Yellow Zinc 12 Micron or right Zinc 3 Micron : Male - YZP # emale - YZP # Male - ZP # emale - ZP # Steel Size: Ø8 x 22 mm inish: Yellow Zinc 12 Micron : Male & emale # Nylon Size: Ø8 x 26 mm inish: rown : Male # emale # rass Size: Ø10 x 25 mm inish: Natural : Male # emale # Steel Size: Ø10 x 26,2 mm inish: Yellow Zinc 2-3 mycron : Male & emale # mm 11 mm 11 mm 12 mm 13 mm 12,5mm 13 mm 10,5 mm 11 mm 11 mm 10 mm 13 mm 12,5mm 13 mm 13

14 INSX KYS & WSHRS INSX KYS Steel, Hardened Hex: 4 or 5 mm or combi key with 4 & 5 mm inish: right Zinc Plated (ZP) or lack Zinc Plated L-shaped or Z-shaped 4 mm hex Z-shaped combi key 5 mm hex Type Size Hex inish L-shaped 23 x 65 mm 4 mm lack # L-shaped 28 X 65 mm 4 mm ZP # L-shaped 31 X 75 mm 5 mm ZP # Z-shaped 37 X 48 mm 4 mm ZP # Z-shaped 39 X 48 mm 5 mm ZP # Z-shaped 35 X 50 mm 4 & 5 mm ZP # L-shaped insex key IINSX KY W/LL POINT Hex: Steel, right Zinc Plated 4, 5 or 6 mm L-shaped Type Size Hex inish L-shaped 28 x 73 mm 4 mm ZP # L-shaped 15 X 65 mm 5 mm ZP # L-shaped 16 X 63 mm 6 mm ZP # WSHRS Spring washer Serrated lock washer Steel, Yellow Zinc Plated or right Zinc Plated rass, Natural Stainless Steel, Natural Sizes: Inner diameter 6,4/8,4 & 10,5 mm lat washer lat washer IN 125- Spring washer IN 127 Serrated lock washer IN etc.

15 13 13 HX NUTS, WRNH KY & NILS HXONL NUT IN 934 inish: Steel Yellow Zinc or right Zinc Size: : M6 # /906 M8 # /16 M10 # /27 HXONL NUT WITH NYLON RIN IN 985 M6 to M10 M6 to M10 inish: Steel and nylon Yellow Zinc or right Zinc Size: : M6 # M8 # M10 # M6 to M10 M6 to M10 WRNH KY /HX NUTS Hex: Steel Yellow Zinc Plated 8 mm (others on request) 86 mm : Hardened steel # Unhardened steel # mm 12 mm OUL POINT STL NILS pplication: s a concealed connector for slats Steel, Yellow Zinc Plated Sizes: Ø3,5 x 9 x 15 mm # Ø4,0 x 13 x 18 mm # Mounting: y use of self-made steel tube with slot. Inner diameter Ø 3,5-4,0 mm. Tube is to be inserted into your drilling machine. 15

16 USHINS KNOK IN USHIN»«Zamak, Yellow Zinc Plated (YZP) Knock in. No collar inish M4 10 mm Ø5 mm YZP # H KNOK IN USHIN»I«Zamak, Yellow Zinc Plated (YZP) Knock in. With countersunk collar H = Head inish M8 20 mm Ø10 mm Ø19 x 3 mm YZP # SRW IN USHIN»L«Steel, Yellow Zinc Plated (YZP) Screw in by use of insert tool # losed end & no collar inish M8 30 mm Ø11,5 mm YZP # M8 39 mm Ø11,5 mm YZP # SRW IN USHIN»L SK«Steel, Yellow Zinc Plated (YZP) Screw in by use of hex key. losed end & no collar X X = Hex inish M8 30 mm Ø11,5 mm 8 mm YZP # M8 39 MM Ø11,5 mm 8 mm YZP #

17 USHINS SRW IN USHIN»«rass, Natural or Steel, Yellow Zinc Plated (YZP) Screw in with slot. No collar rass YZP M4 8,0 mm Ø4,75 mm # M6 10 mm Ø8 mm # M6 14,5 mm Ø8 mm # M6 12 mm Ø8 mm # ZP M6 14,5 mm Ø8 mm # M4 10 mm Ø6 mm # M6 24 mm Ø9 mm # M8 15 mm Ø10 mm # M8 20 mm Ø10 mm # SRW IN USHIN»V«Steel, Yellow Zinc Plated (YZP) Screw in by use of hex key. No collar YZP M6 12 mm Ø8 mm # M6 15 mm Ø8 mm # SRW IN USHIN»«Zamak,Yellow Zinc Plated (YZP) Screw in by use of hex key. With collar H = Head inish X = Hex Item No M4 10 mm Ø5,5 mm Ø8,5 mm YZP 4 x 3,5 mm # M5 10 mm Ø7 mm Ø11 mm YZP 5 x 3,5 mm # M6 10 mm Ø8 mm Ø12 mm YZP 6 x 3,5 mm # M6 13 mm Ø8 mm Ø12 mm YZP 6 x 3,5 mm # M6 16 mm Ø8 mm Ø12 mm YZP 6 x 3,5 mm # M6 20 mm Ø8 mm Ø12 mm YZP 6 x 3,5 mm # M8 13 mm Ø10 mm Ø14,5 mm YZP 8 x 4,5 mm # M8 20 mm Ø10 mm Ø14,5 mm YZP 8 x 5,5 mm # M10 25 mm Ø12 mm Ø16 mm YZP 10 x 7,0 mm # H X 17

18 USHINS KNOK IN USHIN»R«Steel,Yellow Zinc Plated (YZP) or right Zinc Plated (ZP) Knock in. With collar H H = Head YZP ZP M6 14 mm Ø8,3 mm Ø14 x 1,5 mm # # M8 16 mm Ø10,5 mm Ø19 x 2,5 mm # # M10 17 mm Ø12,5 mm Ø22 x 2,5 mm # # KNOK IN USHIN»RN«H Steel, Yellow Zinc Plated (YZP) or right Zinc Plated (ZP) Knock in. With collar H = Head YZP ZP M6 14 mm Ø8,5 mm Ø15 x 2 mm # # M8 16 mm Ø11 mm Ø19 x 2,25 mm # # SRW IN USHIN»«Zamak,Yellow Zinc Plated (YZP) Screw in by use of hex key. No collar X = Hex Item N0. X M6 13 mm Ø7,5 mm 6 x 4,5 mm # M6 20 mm Ø7,5 mm 6 x 5,7 mm # M8 13 mm Ø10,5 mm 8 x 5,0 mm # M8 20 mm Ø10,5 mm 8 x 5,5 mm # M8 25 mm Ø10,5 mm 8 x 5,5 mm # SRW IN USHIN»M«Steel, right Zinc Plated (ZP) Screw in by use of hex key. With countersunk collar X = Hex H = Head X H M6 12 mm Ø8 mm 6 X 2 mm Ø9,8 mm # M6 12 mm Ø8 mm 6 X 3 mm Ø12 mm # M6 15 mm Ø8 mm 6 X 3 mm Ø12 mm # M6 20 mm Ø10 mm 6 X 3 mm Ø12 mm # M8 15 mm Ø10 mm 8 X 3 mm Ø14 mm # M8 20 mm Ø10 mm 8 X 3 mm Ø14 mm # M8 24 mm Ø10 mm 8 X 3 mm Ø14 mm # M10 20 mm Ø13 mm 10 X 3 mm Ø17 mm #

19 USHINS SRW IN USHIN»MZ«Zamak, right Zinc Plated (ZP) Screw in by use of hex key. With countersunk collar H X = Hex H = Head M6 13 mm Ø8 mm 6 x 3,5 mm Ø 12 mm # M8 15 mm Ø10 mm 8 x 3,5 mm Ø 14 mm # X SRW IN USHIN»SK«Steel, Yellow Zinc Plated (YZP) or Zamak (YZP) Screw in by use of hex key. No collar X = Hex YZP Material M6 13,5 mm Ø8,25 mm 6 x 3 mm # Steel M6 15 mm Ø8,5 mm 6 x 4,5 mm # Zamak X»T-NUT«Steel, right Zinc Plated (ZP) or Plain ST = Steel Thickness Knock in, 4 Prongs ST inish M4 5 mm Ø6,5 mm 0,8 mm # ZP M5 8 mm Ø6,5 mm 0,8 mm # ZP M6 8 mm Ø7,5 mm 1,2 mm # ZP M6 11 mm Ø7,5 mm 1,2 mm # ZP M6 15 mm Ø7,5 mm 1,2 mm # ZP M8 10 mm Ø9,5 mm 1,2 mm # ZP M8 15 mm Ø9,5 mm 1,5 mm # Plain M10 11 mm Ø9,5 mm 1,5 mm # ZP M10 16 mm Ø11,75 mm 1,6 mm # ZP ST TOOL OR INSRTIN SRW IN USHIN Steel Tool for inserting screw in bushing Thread M6 # M8 # M10 #

20 USHINS KNOK IN USHINS»XPNSION«rass, Natural Knock in. Without plastic ball or with ball for extra expansion Type M4 7,5 mm 5,5 mm No ball # M4 10 mm 5,5 mm No ball # M6 11,5 mm 8 mm No ball # M6 11,5 mm 8 mm With ball # Pulling power: 100 Kg. NYLON KNOK IN USHIN»N«White nylon Knock in. No collar. losed end. olour Item N0. M4 10 mm Ø8 mm White # M6 10 mm Ø8 mm White # M6 11 mm Ø10 mm White # M6 13 mm Ø10 mm White # M6 20 mm Ø10 mm White # NYLON XPNSION USHIN»STRIPS«White nylon Knock in. With knurled collar. In strips of 24 pcs. olour Item N0. M6 11 mm Ø10 mm White # M6 13 mm Ø10 mm White # SL-WININ XPNSION NYLON USHIN White nylon Knock in. In strips of 30 pcs. 20 olour Item N0. Ø 3 mm 11,5 mm Ø5,5 mm White #

21 SRWS iameter: Length: WOO SRWS rass, Stainless Steel, Steel, Yellow Zinc Plated rom Ø,6 mm up to Ø6,0mm rom 8 mm up to 120 mm IN 95 IN 96 IN 97 Slotted with oval head IN 95, round head IN 96 or countersunk head IN 97 IN 7995 Pozidrive with oval head IN 7995, round head IN 7996 or countersunk head IN 7997 IN etc. IN 7997 HIPOR SRWS IN 7505 Thread: Steel, Zinc Plated (other materials & finishes on request) rom Ø3 mm up to Ø6 mm POZI Lengths: rom 12 mm up to 180 mm Pozidrive with countersunk head (see illustration) # etc. Packing: SISO box packing or bulk (see illustration) SSML SRWS Ø5 MM Steel, right Zinc Plated (other materials & finishes on request) Thread: Ø5 mm Lengths: 30/40 mm or 50 mm Pozidrive or 3 mm hex (see illustration) With & without hole for cover cap # etc. POZI HX 21

22 SRWS SSML SRWS Ø6,3 MM POZI Thread: Lengths: Steel, right Zinc Plated (other materials & finishes on request) Ø6,3 mm 40 mm or 50 mm Pozidrive (see illustration). With & without hole for cover cap # etc. SSML SRWS Ø7 MM Steel, right Zinc Plated (other materials & finishes on request) Thread: Ø7 mm Lengths: 40/45/50/60/70/85 mm Pozidrive or 4 mm hex (see illustration). With & without hole for cover cap POZI HX # etc. from Ø7mm OVR PS OR SSML SRWS Ø5, 6,3 & 7 MM Plastic, White, black, grey, brown, teak (other colours on request) Size: Ø7 mm # etc. 22

23 HNROLTS & TOOL OR INSRTIN HNROLTS inish: Steel Yellow Zinc or right Zinc Size : Size : M4 x 25 mm # M8 x 100 mm # /38 M4 x 50 mm # M10 x 50 mm # M6 x 50 mm # /08 M10 x 60 mm # /61 M6 x 60 mm # /17 M10 x 70 mm # M8 x 50 mm # /23 M10 x 80 mm # M8 x 60 mm # M10 x 90 mm # M8 x 70 mm # /32 M10 x 100 mm # M8 x 80 mm # M10 x 120 mm # 12, Other sizes on request M4 to M10 TOOL OR INSRTIN HNROLTS 120 mm Size : M6 # M8 # M10 # M6 to M

24 : SISO /S Mileparken 11 K Skovlunde (openhagen) Phone: (+45) ax: (+45) enmark -mail: siso@siso.dk Web: