Fittings for OUTDOOR. furniture. Steamer chair fittings. Steamer chair made by Alexander Rose. - high quality furniture fittings

Transcription

1 Fittings for OUTOOR furniture Steamer chair fittings Steamer chair made by lexander Rose

2 SISO /S MILEPRKEN 11 K SKOVLUNE (OPENHGEN) ENMRK PHONE: (+45) FX: (+45) E-MIL: SISO@SISO.K ll specifications stated in the catalogue are errors and omissions excepted SISO /S tager forbehold for trykfejl samt ændringer i produktets specifikationer. Für ruckfehler und Irrtümer ist jede Haftung ausgeschlossen. Produktänderungen behalten wir uns vor. ISTRIUTOR

3 ONTENTS FITTINGS FOR OUTOOR FURNITURE 4-39 RELINER HIR FITTINGS 4-5 STEMER HIR FITTINGS 6-7 U-RKETS & STRPS 8 UMRELL RINGS & HINGES 9-11 HINGES HINGE & SWING SET SPRING 14 HEVY UTY USHION OX HINGES SS FITTINGS FOR USHION OX PNEUMTI EXPNSION SPRING FOR LUNRY OXES KNOK OWN SYSTEM S RSS OMIFIX HES STEEL OMIFIX HES FIFTEEN SREWS & OLTS 29 ROSS OWELS 30 INSEX SREWS & MUSHROOM SREWS 31 INSEX OVERS & INSEX OLLRS 32 INSEX OLLRS, RILL IT & SPERS 33 INSEX KEYS 34 SREWS 35 USHINGS FITTINGS FOR GREN TLES SPLIT FRMES HIE WY MEHNISM 46 LEG ORNER RKETS, NUTS & WING NUT LOKING PIN & HOOKS 49 HNGEROLTS & SS-SREWS, NUTS & WSHERS TWISTER - THE LEG ONNETOR LZY SUSN 54 TH # SURF - THE TLE ONNETOR PINS, SPNNERS & HINGES

4 RELINER HIR FITTINGS 185 mm Ratchet 48 mm Ø 6,1 mm 28 mm Pawl 56 mm Ø 4 mm 89 mm Ø 6,1 mm 25 mm Seat & back plates Recliner chair 28 mm 52 mm 101 mm 41 mm Left Ø 8 mm Ø 6,1 mm Right Ø 6,1 mm Stop bracket left & right 65 mm Special stop bracket w/ hole & groove for locking pin SPEIL STOP RKET W/ HOLE & GROOVE FOR LOKING PIN Steel, Yellow Zinc Plated - 8 Micron 1 Stop bracket left (when seated) # lose up of special stop bracket 4

5 RELINER HIR FITTINGS RELINER HIR FITTINGS Steel or Stainless Steel (SS) ISI 304 Finish: Steel, Yellow Zinc Plated - 8 Micron Stainless Steel, Natural 1 omplete set in steel for one recliner chair: 2 Ratchets # Pawls # Stop bracket right (when seated) # Stop bracket left (when seated) # Seat & back plates # omplete set in stainless steel for one recliner chair: 2 Ratchets # Pawls # Stop bracket right (when seated) # Stop bracket left (when seated) # Seat & back plates # Optional: 2 Protective PV caps for stop bracket # Stop bracket w/cap in function Screws, bolts, nuts & bushings are to be ordered separately according to furniture design, panel thickness etc. Protective PV cap for stop bracket Locking pin for recliner chair LOKING PIN FOR RELINER HIR Since 1999 the legislature of the European Union demands that some kind of locking device is obligatory on all folding chairs imported into Europe to prevent the chair from folding accidentally. rass (spring & pin made of stainless steel) # Stainless steel # lose up of locking pin Size: Handle: Ø 20 x 12mm Pin: Ø 7,5 x 15mm Total length: 50mm 5

6 STEMER HIR FITTINGS 219 mm Ø 5 mm Ratchet 30,5 mm 235 mm 22 mm 28 mm Pawl Ø 4 mm Ø 8,5 mm lose up of knee cap Knee cap 21 mm 22 mm Ø 10,5 mm 39,5 mm 55 mm 20 mm Ø 4 mm 28 mm Ø 10 mm Ø 7 mm Foot rest plunger & spring lose ups of foot rest plunger Foot rest plunger in action 6

7 STEMER HIR FITTINGS lose up of stopper 22 mm 88 mm Stoppers left & right Left Right Ø 8,5 mm Ø 4 mm 35 mm STEMER HIR FITTINGS Finish: rass Polished 1 omplete set for one steamer chair: 2 Ratchets in 235 mm length # Pawls # Stopper right # Stopper left # Optional: 2 Knee caps (left & right) # (on request) 2 Foot rest plungers # Screws, bolts, nuts & bushings are to be ordered separately according to furniture design, panel thickness etc. 7

8 U-RKETS & STRPS Ø 9,5 mm Stainless Steel, Flat Steel, Flat U-RKET F/ RMREST OF FOLING HIR rass, Lacquered, Steel, Yellow Zinc Plated 8 micron or Stainless Steel ISI 304 (SS) Ø 8,5 mm Size: 65 mm length x 29 mm outer width (25 mm inner width) x 39 mm height Material Type Hole Finish Item No. rass ent Ø 8,5 mm Lacquered # Steel Flat Ø 9,5 mm YZP # SS Flat Ø 9,5 mm Natural # Other sizes on request rass, ent STRPS Thickness: Steel, Yellow Zinc Plated (YZP) (Stainless Steel or rass on request) 2 or 3 mm Material Length Width Finish Item No. Steel 245 mm 15 mm YZP # Steel 126,5 mm 16 mm YZP # Other sizes on request 8

9 UMRELL RINGS & HINGES UMRELL RING RSS Size: rass, Natural Ø 40 mm inner diameter Ø 59,5 mm outer diameter 5,0 mm thickness # SEWING MHINE TLE HINGE rass or Stainless Steel (SS) ISI 316 Screw Holes: Ø 4.0 mm Sizes Finish Item. No 30 x 72 x 2.0 mm rass Sanded # x 72 x 2.0 mm Nickel Satin # x 72 x 2.0 mm SS Polished # x 72 x 2.0 mm SS rushed # x 80 x 2.0 mm rass Sanded # mm 72 or 82 mm 180 o Ø4 mm 9

10 UMRELL FITTINGS onnecting screw in SS ONNETING SREW IN SS F/UMRELL RMS Finish: ore: pplication: Stainless Steel 4 Natural Ø 5 mm For wood thickness mm 1 set consists of: 2 x Female screws w/slot, SK, # M4 x 12 mm 1 x Threaded bolt M4 x 25 mm # ONNETING SREW IN RSS F/UMRELL RMS rass Finish: Natural ore: Ø 6 mm pplication: For wood thickness mm 1 set consists of: onnecting screw in rass Eye screw, w/woodthread Stainless Steel 1 x ome head screw M4 x 6 mm 1 x Female screw w/slot, ome head, M4 x 36 mm Item No. male # female # Single blocks w/removable pin and 2 dome nuts w/threaded bolt

11 UMRELL FITTINGS Single blocks w/removable pin w/bracket Pad eye 1 complete set for one umbrella: UMRELL PULLEY SYSTEM IN STINLESS STEEL (SS) 2 Single blocks w/removable pin SS, 4 # Single blocks w/removable pin, w/bracket SS, 4 # Pad eyes SS, 2 # Eye screw, w/woodthread SS, 2 # ome nuts M6 SS, 2 # Threaded bolt M6 x xx mm SS, 2 # ect. 11

12 HINGES UTLER S TRY HINGE SQURE W/STEEL SPRING utler s Tray hinge, Square, Sanded rass rass Screw holes: Ø 3,25 Type: Size Finish Item No. Square 38 x 64 x 3 mm Sanded mm Ø3,25mm 64 mm UTLER S TRY HINGE ROUN W/STEEL SPRING utler s Tray hinge, Round, Polished rass rass Screw holes: Ø 5 mm Type: Size Finish Item No. Oval 38 x 64 x 3 mm Sanded Oval 38 x 64 x 3 mm Polished (No stock item. On request) 38 mm Ø5 mm 64 mm 12

13 HINGES RSS & SS-316 UTT HINGES rass or Stainless Steel (SS) ISI 316 Screw holes: Ø 3,5 mm Size: W/H/T Material Finish Item No. 40 x 35 x 1,4 mm rass Sanded x 40 x 1,4 mm rass Sanded x 40 x 1,7 mm SS Polished x 50 x 1,8 mm rass Polished H T W rass or Stainless Steel (SS) ISI 316 Screw holes: Ø 4,5 mm RSS & SS-316 FLP HINGES Size Material Finish Item No. 30 x 80 x 1,75 mm rass Polished x 80 x 1,75 mm rass Sanded mm Flap hinge, Polished rass & Sanded 30 mm Ø 4,5 mm 13

14 HINGE, SWING SET SPRING & HEVY UTY USHION OX HINGES SS mm 13 mm FLP HINGE Flap hinge, rass rass Screw holes: Ø 3 mm Size Material Finish Item No. 13 x 80 x 1,75 mm rass Sanded SWING SET SPRING Size: Steel, right Zinc Plated Ø 8 x 110 mm Item No Swing seat made by lexander Rose +0, ,1 6 0 UTT HINGE FLUSH 100 ±0, , , , ,90 ±0,02 54 ±0,3 SS Size: 100 X 70 X 2,5 mm Incl. SK SS-304 screws, Ø5 x 30 mm Item No ±0,3 28 ±0,3 2,5 ±0,1 12,1 18,8 20,750 2,5 ±0,1 14

15 88 HEVY UTY USHION OX HINGES SS-304 2,8 R10 24,6 101,6 ±0,3 24,6 25,5 19, ,5 4,7 1 8,100 76,2 ±0,3 10, ±0,15 4 x R12,5 26 ±0,15 12,5 ±0,15 26 ±0,15 19,5 ±0, ±0,2 79 ±0,2 26 ±0, ±0,2 79 ±0,2 26 ±0, ,5 25,5 2,8 4,7 9,5 101,6 ±0,3 19,05 25,5 76,2 ±0,3 1 8,100 10, UTT HINGE ROUN SS Size: 102 X 76 X 3 mm Incl. SK SS-304 screws, Ø5 x 30 mm Item No UTT HINGE SQURE SS Size: 102 X 76 X 3 mm Incl. SK SS-304 screws, Ø5 x 30 mm Item No ±0,15 19,5 ±0,15 27 ±0,15 12,5 ±0,15 4 x R12,5 25 ±0, , , UTT HINGE LIFT OFF LEFT SS Size: 100 X 88 X 3 mm Incl. SK SS-304 screws, Ø5 x 30 mm Item No UTT HINGE LIFT OFF RIGHT SS Size: 100 X 88 X 3 mm Incl. SK SS-304 screws, Ø5 x 30 mm Item No

16 LOKS M LOK 1930 F/USHION OX ap & front of lock body: Stainless Steel Rest of the body: Zamak Hex nut: Zamak am and Rosette: Steel Keys: rass & plastic Size: ylinder: Ø 19 x 30 mm Hooked am: 50 mm from centre to edge Specification: 90 degree turning 2 SISO car keys with key alike code #701 (key to differ on request ) am lock Item No.: # lose up of am lock Mortise lock MORTISE LOK #245 W/2 HOOKS F/USHION OX rass 16 Size: Lock case: 64 x 38 mm Square front plate: 64 x 11 mm Keys: Steel, nickel plated Specification: 22 mm backset 2 metal keys with key alike bit Item No.: lose up of Mortise lock

17 SPRING F/USHION OX EXPNSION SPRING Steel, hrome Plated (PL) Stainless Steel 316 (SS) Size: Piston Ø 8 mm ylinder Ø 18 mm Stroke (S): 162 mm L S Material Weight Item No. 413 mm 162 mm Steel 14 kg # mm 162 mm Steel 16 kg # mm 162 mm SS 16 kg # mm 162 mm Steel 18 kg # lose up of Expansion spring S Smooth expansion L lose up of Expansion spring 17

18 SPRING F/USHION OX MPING SPRING Steel, hrome Plated (PL) Size: Piston Ø 8 mm ylinder Ø 18 mm Stroke (S): 162 mm L S Material Force Item No. 413 mm 162 mm Steel 14 kg # lose up of amping spring S L Round mounting bracket Measurement ill. Ø ushion box ROUN MOUNTING RKET Steel, right Zinc Plated (ZP) See illustration for understanding of measurement scheme Ø Finish Item No. 14 mm 28 mm 7 x Ø 9,7 mm 1,5 mm 4,5 mm ZP # SS mounting bracket L Type 18

19 SPRING F/USHION OX Smooth closing lose up of amping spring Measurement ill. Ø L-mounting bracket L-MOUNTING RKETS Steel, right Zinc Plated (ZP) See illustration for understanding of measurement scheme Ø Finish Item No. 14,5 mm 46 mm 14 mm 2 mm Ø 4 mm ZP # ,5 mm 46 mm 14 mm 3 mm Ø 4,5 mm ZP # STINLESS STEEL RKETS Stainless Steel, (SS) ISI 316 See illustration for understanding of measurement scheme SS mounting bracket Flat Ø Finish Item No. Type 18 mm 56 mm 18 mm 2 mm 9 x 6,8 mm SS # L 14 mm 56 mm 40 mm 2 mm 9 x 6,8 mm SS # Flat 19

20 PNEUMTI EXPNSION SPRING FOR LUNRY OXES 28 L S 15 PNEUMTI EXPNSION SPRING Steel, Silver /Nickel plated Size: Piston Ø 6 mm ylinder Ø 15 mm Stroke (S): 92 mm L S Material Force Item No. 247 mm 92 mm Steel 60N # mm 92 mm Steel 80N # mm 92 mm Steel 100N # mm 92 mm Steel 120N # SGS test: cycles 20 May be bought complete with 3 mounting brackets or without brackets

21 MOUNTING RKETS F/EXPNSION SPRING L-MOUNTING RKET Steel, Nickel Plated (NPL) Ø Item No. 16,5 mm 51 mm 15 mm 2 mm Ø 4 x 17 mm # Incl. 2 Nickel plated wood screws,pz, Ø 3,5 x 16 mm Ø FLT T-SHPE MOUNTING RKET Steel, Nickel Plated (NPL) Ø Item No. 14 mm 46 mm 31,5 mm 2 mm 4,5 mm # Ø Incl. 2 Nickel plated wood screws,pz, Ø 3,5 x 16 mm ROUN MOUNTING RKET Steel, Nickel Plated (NPL) Ø Item No. 16 mm 31 mm 2 mm 4 mm # Incl. 3 Nickel plated wood screws,pz, Ø 3,5 x 16 mm Ø 21

22 KNOK OWN»SYSTEM S«KNOK OWN SYSTEM S Is an improvement of the conventional eccentric cam fittings! Instead of an eccentric cam house in zamak we have developed a steel barrel with a pointed grub screw, which is being wedged below the neck of the dowel ensuring a permanent grip Replaces all 15mm diameter eccentric cam fittings without change of drilling, as the barrel requires the normal 34mm bore distance from the edge. an also be supplied for 24mm and 44mm distance. ll parts are made of high quality steel or stainless steel for out door use. The material warrants unsurpassed anchoring properties and eliminates the risk of breakage of the fitting due to the constant high tension. K-SYSTEM S is available for 16 & 19 mm panels.»system S«1512 FOR 16 MM PNELS Steel or Stainless Steel Size: ylinder: ø 15 x 12,5 mm Grub screw: M10 x 6 mm Finish: ronze Plated (RZ), right Zinc Plated (ZP), Yellow Zinc Plated (YZP), or Stainless Steel (SS) Natural Slot Hex RZ ZP YZP SS Natural ylinder Grub screw w/slot on request Grub screw w/hex on request ,5 7,5 5»SYSTEM S«1514 FOR 19 MM PNELS Steel or Stainless Steel Size: ylinder: ø 15 x 14 mm Grub screw: M10 x 7,5 mm Finish: ronze Plated (RZ), right Zinc Plated (ZP), Yellow Zinc Plated (YZP), or Stainless Steel (SS) Natural Slot Hex RZ ZP YZP SS Natural ylinder Grub screw w/slot on request Grub screw w/hex on request

23 KNOK OWN»SYSTEM S«STEEL OWELS FOR»SYSTEM S«Finish: Steel or Stainless Steel Steel, right Zinc Plated (ZP) & Stainless Steel (SS), Natural Type: Metric thread with cross cut Size Material Finish Item No M6 x 24 mm Steel ZP # M6 x 34 mm Steel ZP # M6 x 34 mm SS Natural # or 34 6 Ø9 KNOK IN USHING»EXPNSION«rass, Natural Type: Knock-in. Without plastic ball or with ball for extra expansion Type: Item No. M6 11,5 mm Ø 8 mm No ball M6 11,5 mm Ø 8 mm With ball Pulling power: 100 Kg. LTERNTIVE USHINGS FOR»SYSTEM S«SE PGE 36 TO 39 23

24 RSS OMIFIX HES E G RSS OMIFIX HE #1106 M6 WITHOUT OLLR rass Finish: rass, Natural Type: No collar but with 5 mm open hex hole F 1 0 E F G Item No. Ø 13 mm 0 mm 10 mm M6 5 mm Ø 12 mm 5 mm # RSS OMIFIX HE #1007 M6 W/OPEN HEX HOLE E F G rass Finish: rass, Natural Type: Flat head with 5 mm open hex hole E F G Item No. Ø 12 mm 2 mm 10 mm M6 5 mm Ø 8 mm 7 mm # RSS OMIFIX HE #1011 M6 W/OPEN HEX HOLE E Finish: Type: rass rass, Natural Flat head with 5 mm open hex hole F E F G G E F G Item No. Ø 15 mm 2,25 mm 9 mm M6 5 mm Ø 9 mm 7 mm # RSS OMIFIX HE #1011 M6 W/LOSE HEX HOLE rass Finish: rass Plated (PL) or Nickel Plated (NPL) Type: Flat head with 5 mm closed hex hole E F G NPL PL Ø 15 mm 2 mm 10 mm M6 5 mm Ø 9 mm 7 mm # # E RSS OMIFIX HE #1012 M6 W/OPEN HEX HOLE rass or Stainless Steel (SS) ISI 304 Finish: rass, Natural and SS, Natural Type: Flat head with 4 or 5 mm open hex hole 24 F G E F G SS rass Ø 15 mm 2,25 mm 11,75 mm M6 5 mm Ø 9 mm 8,5 mm on request # Ø 15 mm 2,25 mm 11,75 mm M6 4 mm Ø 9 mm 7 mm # on request

25 RSS OMIFIX HES RSS OMIFIX HE #1012 M6 W/LOSE HEX HOLE Finish: Type: rass rass Plated (PL) or Nickel Plated (NPL) Flat head with 5 mm closed hex hole E G E F G NPL PL Ø 15 mm 2 mm 12 mm M6 5 mm Ø 9 mm 7 mm # # F RSS OMIFIX HE #1013 M6 W/OPEN HEX HOLE rass Finish: rass, Natural Type: Flat head with 5 mm open hex hole E F G SS rass Ø 15 mm 2,25 mm 18 mm M6 5 mm Ø 9 mm 12 mm # # E F G RSS OMIFIX HE #1013 M6 W/LOSE HEX HOLE Finish: Type: rass rass Plated (PL) or Nickel Plated (NPL) Flat head with 5 mm closed hex hole E G E F G NPL PL Ø 15 mm 2 mm 18 mm M6 5 mm Ø 9 mm 13 mm # # F RSS OMIFIX HE #1015 M6 W/OPEN HEX HOLE rass or Stainless Steel (SS) ISI 304 Finish: rass, Natural and SS, Natural Type: ome head with 5 mm open hex hole E G E F G SS rass Ø 13 mm 2,50 mm 10,50 mm M6 5 mm Ø 8 mm 9 mm # # F 25

26 E F RSS OMIFIX HES RSS OMIFIX HE #1015 M6 W/LOSE HEX HOLE rass Finish: rass Plated (PL) or Nickel Plated (NPL) Type: ome head with 5 mm closed hex hole G E F G NPL PL Ø 13 mm 3 mm 10 mm M6 5 mm Ø 8 mm 6 mm # # RSS OMIFIX HE #1031 M6 W/OPEN HEX HOLE E Finish: Type: rass rass, Natural Flat head with 5 mm open hex hole F G E F G Item No. Ø 19 mm 2 mm 12 mm M6 5 mm Ø 9 mm 10 mm # E RSS OMIFIX HE #1042 M6 W/OPEN HEX HOLE rass Finish: rass, Natural Type: Flat head with 5 mm open hex hole G F E F G Item No. Ø 19 mm 2 mm 8 mm M6 5 mm Ø 9 mm 6,5 mm # RSS OMIFIX HE #1046 M6 W/OPEN HEX HOLE E G Finish: Type: rass rass, Natural ome head with 5 mm open hex hole 26 F E F G Item No. Ø 19 mm 3 mm 10 mm M6 5 mm Ø 9 mm 7,5 mm #

27 RSS & STEEL OMIFIX HES RSS OMIFIX HE #1060 M8 W/OPEN HEX HOLE rass Finish: rass, Natural Type: ome head with 5 mm open hex hole E G E F G Item No. Ø 17 mm 2,50 mm 11,5 mm M8 5 mm Ø 10 mm 8 mm # F RSS OMIFIX HE #1062 M8 W/OPEN HEX HOLE Finish: Type: rass rass, Natural ome head with 5 mm open hex hole E G E F G Item No. Ø 30 mm 4 mm 7 mm M8 5 mm Ø 12 mm 6 mm # F STEEL OMIFIX HE # F-563 M6 W/LOSE HEX HOLE Steel Finish: rass Plated (PL) or Yellow Zinc Plated 8 Micron (YZP) Type: Flat head with 4 or 5 mm closed hex hole E F G PL YZP Ø 15 mm 2 mm 12 mm M6 4 mm Ø 9 mm 7 mm # # Ø 15 mm 2 mm 12 mm M6 5 mm Ø 9 mm 7 mm # on request Ø 15 mm 2 mm 18 mm M6 4 mm Ø 9 mm 13 mm on request # Ø 15 mm 2 mm 18 mm M6 5 mm Ø 9 mm 13 mm # on request E F G STEEL OMIFIX HE # -564 M6 W/LOSE HEX HOLE Steel Finish: rass Plated (PL) or Nickel Plated (NPL) Type: ome head with 5 mm closed hex hole E F G NPL PL Ø 15 mm 2,5 mm 12 mm M6 5 mm Ø 9 mm 7 mm # on request Ø 15 mm 2,5 mm 15 mm M6 5 mm Ø 9 mm 10 mm on request # E F G 27

28 STEEL OMIFIX HES STEEL OMIFIX HE # -597 M6 W/LOSE HEX HOLE E Finish: Steel rass Plated (PL) or lack oxidized (LK) (other finishes on request) G Type: ome head with 5 mm closed hex hole F E F G PL LK Ø 20 mm 3 mm 18 mm M6 5 mm Ø 9 mm 12 mm # # E G Finish: Type: STEEL OMIFIX HE # -637 M6 W/LOSE HEX HOLE Steel Yellow Zinc Plated 2-3 micron (YZP) (other finishes on request) ome head with 5 mm losed hex hole F E F G YZP Ø 15 mm 4 mm 8 mm M6 5 mm Ø 8 mm 5 mm # STEEL OMIFIX HE # -595 M8 W/LOSE HEX HOLE E F G Finish: Type: Steel rass Plated (PL), lack oxidized (LK) ronze Plated (RZ) or Nickel Plated (NPL) ome head with 5 mm closed hex hole E F G PL LK Ø 20 mm 3 mm 16 mm M8 5 mm Ø 10 mm 12 mm # # NPL RZ Ø 20 mm 3 mm 16 mm M8 5 mm Ø 10 mm 12 mm # # STEEL OMIFIX HE # -602 M10 W/LOSE HEX HOLE E G Finish: Type: Steel Nickel Plated (NPL) (other finishes on request) ome head with 5 mm closed hex hole 28 F E F G NPL Ø 20 mm 4 mm 13 mm M10 5 mm Ø 13 mm 9 mm #

29 FIFTEEN SREWS & OLTS THREE OLTS Thread: Lengths: Item No. Steel, Yellow Zinc Plated (other finishes on request) Stainless Steel, Natural rass, Natural M6 or M8 From 18 up to 1000 mm etc. Steel, (YZP) FIFTEEN SREWS Steel, Yellow Zinc Plated (other finishes on request) Stainless Steel ISI 316 rass, Natural Stainless Steel ISI 316 Head size: Ø 15 x 2,5 mm Steel, (YZP) Hex size: 4 mm Thread: M6 (M8 on request) Lengths: 25/30/35/40/45/50/60/70/80/90/100 & 120 mm Type: With 3mm point or conical (see illustration) Item No etc. onical rass, Natural Point Steel FIFTEEN WOO SREWS Steel, Yellow Zinc Plated (other finishes on request) Stainless Steel ISI 316 Stainless Steel ISI 316 Head size: Ø 15 x 2,5 mm Hex size: 4 mm Thread: Ø 6,3 mm Steel, (YZP) Lengths: 40/50/60 and 70 mm (other sizes on request) Type: With point (see illustration) Item No. # etc. Point 29

30 ROSS OWELS ROSS OWELS Steel, rass or Stainless Steel Stainless Steel right Zinc Plated Type: Finish: With slot Steel, Yellow Zinc Plated (YZP) right Zinc Plated (ZP), rass, Natural Stainless Steel, (SS), Natural Yellow Zinc Plated * istance from centre of hole to edge. rass * Material Finish Item No. M6 Ø 10 mm 13 mm 8/5 mm Steel ZP/YZP # /007 M6 Ø 10 mm 14 mm 8/6 mm Steel ZP/YZP # /31 M6 Ø 10 mm 14 mm 8/6 mm rass Natural # M6 Ø 10 mm 14 mm 8/6 mm SS Natural # M6 Ø 10 mm 16 mm 10/6 mm Steel YZP # M6 Ø 10 mm 18 mm 12/6 mm Steel YZP/ZP # /328 M6 Ø 10 mm 30 mm 20/10 mm Steel ZP # M6 Ø 10 mm 20 mm 10/10 mm Steel ZP/YZP # /071 M6 Ø 10 mm 25 mm 12,5/12,5 mm Steel ZP # M6 Ø 10 mm 30 mm 15/15 mm Steel ZP # M6 Ø 10 mm 40 mm 20/20 mm Steel ZP # M6 Ø 10 mm 45 mm 22,5/22,5 mm Steel ZP # M8 Ø 12 mm 20 mm 10/10 mm Steel YZP # M8 Ø 12 mm 25 mm 12,5/12,5 mm Steel ZP # M8 Ø 12 mm 30 mm 15/15 mm Steel YZP # M8 Ø 12 mm 50 mm 25/25 mm Steel ZP/YZP # /92 M8 Ø 12 mm 60 mm 30/30 mm Steel ZP # ROSS OWEL NO W/2 HOLES Steel Type: Finish: With slot Steel, right Zinc Plated (ZP) * istance from centre of hole to edge. right Zinc Plated E * E Material Finish Item No. M6 Ø 10 mm 60 mm 14 mm c.c. 32 mm Steel ZP # M6 Ø 10 mm 60 mm 10 mm c.c. 40 mm Steel ZP # M6 Ø 10 mm 82 mm 9 mm c.c. 64 mm Steel ZP #

31 INSEX SREWS & MUSHROOM SREWS MUSHROOM SREWS Head size: Hex size: Thread: Lengths: Type: Item No. Steel, Yellow Zinc or lack Oxidized Other materials & finishes on request Ø 15 mm 4 mm (5 mm on request) M6 (M8 on request) 12/16/20/23/30/32/38/45/50/60/63/90 mm (other lengths on request) lunt (Point on request) # etc. lunt INSEX SREWS Head size: Hex size: Thread: Lengths: Type: Item No. Steel, Yellow Zinc, rass Plated or lack Oxidized Stainless Steel, (SS), Natural Other materials & finishes on request Ø 12 x 4 mm (counter sunk) 4 mm M6 (M8 and M10 on request) 32/35/38/44/50/51/57/60/63/76/90/100/120/126 mm (other lengths on request) Pointed or blunt (see illustration) # etc. Point lunt 31

32 INSEX OVERS & INSEX OLLRS INSEX OVER PS Ø12 Head size: Pin: Plastic, black Ø 15mm, ome Ø 4,2 mm for 4 mm hex hole Ø4,2 Item No INSEX WOO PLUGS 5,50 Size: Teak wood (other wood types on request) Ø 13,5 x 5,5 m Ø 13,50 Item No INSEX OLLRS - RSS Ø 6,4 Ø 13 4,5 Size: rass Ø 13 x 4,5 mm x M6 Item No. rass Natrual # rass lack Oxidized # rass Nickel Plated # ,5 11 2,5 UP WSHER - SS Stainless Steel (SS) Size: Ø 11 x 8 x 4,5 mm Item No. # INSEX OLLRS - NYLON Ø 6,4 Ø 12,7 4,5 Nylon, lack Size: Ø 12,7 x 4,5 mm X M6 Item No. #

33 INSEX OLLRS, RILL IT & SPERS INSEX OLLRS - STEEL W/SHFT Ø20 Steel, Yellow Zinc 2,40 Size: Ø 20 x 16 mm x M6 16 mm Item No. # Ø6 Ø9 RILL IT F/INSEX SREWS & OLLRS Twin set boring bits for ø7mm and Ø13mm in one operation Item No. # adjustable ISTNE SPERS Polyethylene (PE), black or white. Item - number olor diameter d diameter H height # lack 20 mm 5,3 mm 20 mm # lack 20 mm 5,3 mm 22,5 mm # lack 22 mm 6,0 mm 10 mm # lack 20 mm 6,3 mm 3 mm # lack 20 mm 6,3 mm 7,5 mm # lack 20 mm 8,4 mm 10 mm # lack 20 mm 8,4 mm 12,5 mm # lack 20 mm 10,5 mm 3 mm # lack 20 mm 10,5 mm 6 mm # lack 20 mm 10,5 mm 20 mm # White 30 mm 6,3 mm 10 mm # lack 40 mm 10,5 mm 20 mm *Other sizes and colors on request. Minimum quantity: 1000 pcs d H 33

34 INSEX KEYS INSEX KEYS Steel, Hardened Hex: 4 or 5 mm or combi key with 4 & 5 mm Finish: right Zinc Plated (ZP) or lack Zinc Plated Type: L-shaped or Z-shaped 4 mm hex Z-shaped combi key 5 mm hex Type Size Hex Finish Item No. L-shaped 23 x 65 mm 4 mm lack # L-shaped 28 X 65 mm 4 mm ZP # L-shaped 31 X 75 mm 5 mm ZP # Z-shaped 37 X 48 mm 4 mm ZP # Z-shaped 39 X 48 mm 5 mm ZP # Z-shaped 35 X 50 mm 4 & 5 mm ZP # L-shaped insex key INSEX KEY W/LL POINT Hex: Type: Steel, right Zinc Plated 4, 5 or 6 mm L-shaped Type Size Hex Finish Item No. L-shaped 28 x 73 mm 4 mm ZP # L-shaped 15 X 65 mm 5 mm ZP # L-shaped 16 X 63 mm 6 mm ZP #

35 SREWS OULE POINTE STEEL NILS pplication: s a concealed connector for slats Steel, Yellow Zinc Plated Sizes: Ø 3,5 x 9 x 15 mm # Ø 4,0 x 13 x 18 mm # Mounting: y use of self-made steel tube with slot. Inner diameter Ø 3,5-4,0 mm. Tube is to be inserted into your drilling machine. Thread: Lengths: Type: Item No. Packing: HIPOR SREWS IN 7505 Steel, Zinc Plated (other materials & finishes on request) From Ø 3 mm up to Ø 6 mm From 12 mm up to 180 mm Pozidrive with countersunk head (see illustration) # etc. SISO box packing or bulk (see illustration) POZI WOO SREWS iameter: Length: rass, Natural, Stainless Steel, Natural Steel, Yellow Zinc Plated From Ø 1,6 mm up to Ø 6,0mm From 8 mm up to 120 mm IN 95 IN 96 IN 97 Type: Item No. Slotted with oval head IN 95, round head IN 96 or countersunk head IN 97 Pozidrive with oval head IN 7995, round head IN 7996 or countersunk head IN etc. IN 7995 IN 7996 IN

36 USHINGS Material KNOK IN USHING»«Zamak, Yellow Zinc Plated (YZP) Type Knock in. No collar Finish Item No. M4 10 mm Ø5 mm YZP # Material KNOK IN USHING»I«Zamak, Yellow Zinc Plated (YZP) H Type Knock in. With countersunk collar H = Head Finish Item No. M8 20 mm Ø10 mm Ø19 x 3 mm YZP # Material SREW IN USHING»L«Steel, Yellow Zinc Plated (YZP) Type Screw in by use of insert tool # losed end & no collar Finish Item No. M8 30 mm Ø11,5 mm YZP # M8 39 mm Ø11,5 mm YZP # Material Type SREW IN USHING»L SK«Steel, Yellow Zinc Plated (YZP) Screw in by use of hex key. losed end & no collar X = Hex Finish Item No. M8 30 mm Ø11,5 mm 8 mm YZP # M8 39 MM Ø11,5 mm 8 mm YZP # X 36

37 USHINGS SREW IN USHING»«Material Type rass, Natural or Steel, Yellow Zinc Plated (YZP) or right Zinc Plated (ZP) Screw in with slot. No collar rass YZP M4 8,0 mm Ø4,75 mm # M6 10 mm Ø8 mm # M6 14,5 mm Ø8 mm # M6 12 mm Ø8 mm # ZP M6 14,5 mm Ø8 mm # M4 10 mm Ø6 mm # M6 24 mm Ø9 mm # M8 15 mm Ø10 mm # M8 20 mm Ø10 mm # SREW IN USHING»V«Material Steel, Yellow Zinc Plated (YZP) Type Screw in by use of hex key. No collar YZP M6 12 mm Ø8 mm # M6 15 mm Ø8 mm # SREW IN USHING»«Material Zamak,Yellow Zinc Plated (YZP) H X Type Screw in by use of hex key. With collar H = Head Finish X = Hex Item No M4 10 mm Ø5,5 mm Ø8,5 mm YZP 4 x 3,5 mm # M5 10 mm Ø7 mm Ø11 mm YZP 5 x 3,5 mm # M6 10 mm Ø8 mm Ø12 mm YZP 6 x 3,5 mm # M6 13 mm Ø8 mm Ø12 mm YZP 6 x 3,5 mm # M6 16 mm Ø8 mm Ø12 mm YZP 6 x 3,5 mm # M6 20 mm Ø8 mm Ø12 mm YZP 6 x 3,5 mm # M8 13 mm Ø10 mm Ø14,5 mm YZP 8 x 4,5 mm # M8 20 mm Ø10 mm Ø14,5 mm YZP 8 x 5,5 mm # M10 25 mm Ø12 mm Ø16 mm YZP 10 x 7,0 mm # LOW PROFILE SREW IN USHING The only insert on the market especially designed with a very low profile for application in thin material such as veneer and plywood. Item No. M6 X 6/7 mm Yellow Zinc Plated #

38 USHINGS KNOK IN USHING»R«Material Type Steel,Yellow Zinc Plated (YZP) or right Zinc Plated (ZP) Knock in. With collar H = Head YZP ZP M6 14 mm Ø8,3 mm Ø14 x 1,5 mm # # H M8 16 mm Ø10,5 mm Ø19 x 2,5 mm # # M10 17 mm Ø12,5 mm Ø22 x 2,5 mm # # KNOK IN USHING»RN«Material Steel, Yellow Zinc Plated (YZP) or right Zinc Plated (ZP) Type Knock in. With collar H = Head YZP ZP H M6 14 mm Ø8,5 mm Ø15 x 2 mm # # M8 16 mm Ø11 mm Ø19 x 2,25 mm # # SREW IN USHING»E«Material Type Zamak,Yellow Zinc Plated (YZP) Screw in by use of hex key. No collar X = Hex Item N0. M6 13 mm Ø7,5 mm 6 x 4,5 mm # M6 20 mm Ø7,5 mm 6 x 5,7 mm # M8 13 mm Ø10,5 mm 8 x 5,0 mm # M8 20 mm Ø10,5 mm 8 x 5,5 mm # M8 25 mm Ø10,5 mm 8 x 5,5 mm # X Material Type SREW IN USHING»M«Steel, right Zinc Plated (ZP) Screw in by use of hex key. With countersunk collar X = Hex H = Head Item No. M6 12 mm Ø8 mm 6 X 2 mm Ø9,8 mm # M6 12 mm Ø8 mm 6 X 3 mm Ø12 mm # H M6 15 mm Ø8 mm 6 X 3 mm Ø12 mm # M6 20 mm Ø10 mm 6 X 3 mm Ø12 mm # M8 15 mm Ø10 mm 8 X 3 mm Ø14 mm # M8 20 mm Ø10 mm 8 X 3 mm Ø14 mm # M8 24 mm Ø10 mm 8 X 3 mm Ø14 mm # M10 20 mm Ø13 mm 10 X 3 mm Ø17 mm # X 38

39 USHINGS H Material Type SREW IN USHING»MZ«Zamak, right Zinc Plated (ZP) Screw in by use of hex key. With countersunk collar X = Hex H = Head Item No. X M6 13 mm Ø8 mm 6 x 3,5 mm Ø 12 mm # M8 15 mm Ø10 mm 8 x 3,5 mm Ø 14 mm # SREW IN USHING»SK«Material Steel, Yellow Zinc Plated (YZP) or Zamak (YZP) X Type Screw in by use of hex key. No collar X = Hex YZP Material M6 13,5 mm Ø8,25 mm 6 x 3 mm # Steel M6 15 mm Ø8,5 mm 6 x 4,5 mm # Zamak»T-NUT«Material Type Steel, right Zinc Plated (ZP) or Plain ST = Steel Thickness Knock in, 4 Prongs ST ST Item No. Finish M4 5 mm Ø6,5 mm 0,8 mm # ZP M5 8 mm Ø6,5 mm 0,8 mm # ZP M6 8 mm Ø7,5 mm 1,2 mm # ZP M6 11 mm Ø7,5 mm 1,2 mm # ZP M6 15 mm Ø7,5 mm 1,2 mm # ZP M8 10 mm Ø9,5 mm 1,2 mm # ZP M8 15 mm Ø9,5 mm 1,5 mm # Plain M10 11 mm Ø9,5 mm 1,5 mm # ZP M10 16 mm Ø11,75 mm 1,6 mm # ZP TOOL FOR INSERTING SREW IN USHING Material Type Thread Steel Tool for inserting screw in bushing Item No. M6 # M8 # M10 #

40 FITTINGS FOR GREN TLES 40

41 SPLIT FRME lose up of slide wing T W In mm O Model Split»udget«Steel - Zinc Plated Opening (O) losed Length () Total Length (T) Wing Size (W) Slide Width () Slide Height () Wing Width (X) Load apacity 60 kg. 60 kg. 80 kg. 80 kg. 80 kg. Item No.: How the opening is measured: 1: lose the slide completely 2: Measure the total length when closed 3: ivide the total length () by 2 and make a pencil mark on the wings of the slide (W) 4: Open the slide completely and measure the distance between the pencil marks made and you have the opening (O) Ø5 X Table top * Illustration only for measurement use Other sizes on request 41

42 TOP SLIE 9097 lose up of slide wing W T O In mm Model Top Slide 9097»udget«Steel - Zinc Plated Ø5 X Table top Opening (O) losed Length () Total Length (T) Wing Size (W) Slide Width () Slide Height () Wing Width (X) Load apacity 45 kg. 45 kg. 45 kg. 45 kg. 45 kg. 45 kg. Item No.: * Illustration only for measurement use Other sizes on request 42

43 SYNHRONI SLIE lose up of slide wing W T O Ø5 X Table top * Illustration only for measurement use Other sizes on request In mm Model Synchronic»udget«Steel - Zinc Plated Opening (O) losed Length () Total Length (T) Wing Size (W) Slide Width () Slide Height () Wing Width (X) Load apacity 45 kg. 45 kg. 45 kg. 45 kg. 45 kg. 45 kg. Item No.:

44 SYNHRONI SLIE WITH RKE lose up of slide wing T W O lose-up of brake system 44 In mm Model Synchronic rake Steel - Zinc Plated Opening (O) losed Length () Total Length (T) Wing Size (W) Slide Width () Slide Height () Wing Width (X) Load apacity 60 kg. 60 kg. 60 kg. 60 kg. 60 kg. 90 kg. 90 kg. Item No.: Ø5 X Table top * Illustration only for measurement use Other sizes on request

45 WOO SLIE»SPLIT«lose up of slide wing Right: Table shown from bottom W T O In mm Wood Slide»Split«urian Wood Hard Plastic Worm Gear Opening (O) losed Length () Total Length (T) Wing size (W) Slide Width () Slide Height () Wing Width (X) Item No.: How the opening is measured: 1: lose the slide completely 2: Measure the total length when closed 3: ivide the total length () by 2 and make a pencil mark on the wings of the slide (W) 4: Open the slide completely and measure the distance between the pencil marks made and you have the opening (O) ø5 X * Illustration only for measurement use Table top 45

46 Hide way Mechanism in action HIE WY MEHNISM HIE WY MEHNISM f/ FOLE TLE TOPS - Suitable for table flap widths from 400 to 700 mm. Steel Size: ar: Ø8 x 800 mm Frame: 160 x 255 mm lips: 20 x 75 mm Screw holes: Ø4,5 mm Finish: hrome Plated The Mechanism incl. 2 rackets Steel Size: 14 x 55 x 109 mm Screw holes: Ø 4,5 mm Finish: hrome Plated Item No.: # E F in mm. in mm. in mm. in mm min min min min. 650 E = (Plate thickness x 2) + 7,50 mm. min. F = (Plate thickness x 2) + 14,50 mm mm Hide way Mechanism for Folded Table Tops seen from bottom with other accessories mounted 2 2 SUPPORT RKET f/ TLE FLPS Ø8 Ø5,5 30 mm Steel Size: ody: 46 x 30 mm Pin: Ø8 x 47 mm Screw holes: Ø5,5 mm Finish: Yellow Zinc #

47 100 mm LEG ORNER RKETS Height: 60mm MOEL 21 1 Hole f/m8 or M10 olt 32 mm 60 mm Steel thickness 1,5mm: Steel, Yellow Zinc, 8 Micron # Steel, right Zinc # Stainless Steel # mm 130 mm ø 5 mm 58 mm 60 mm Steel thickness 2,0mm: Steel, Yellow Zinc, 8 Micron # Steel, right Zinc # Stainless Steel # on request MOEL 22 Height: 60mm 1 or 3 Holes f/m8 or M10 olt 1 Hole: Steel thickness 2,0mm: Steel, Yellow Zinc, 8 Micron # Steel, right Zinc # Stainless Steel # on request 48 mm ø 5 mm 3 Holes: Steel thickness 2,0mm: Steel, Yellow Zinc, 8 Micron # Steel, right Zinc # Stainless Steel # on request MOEL mm Height: 40mm 1 Hole f/m8 or M10 olt 24 mm 40 mm Steel thickness 1,5mm: Steel, Yellow Zinc, 8 Micron # Steel, right Zinc # Stainless Steel # on request 48 mm ø 5 mm Steel thickness 2,0mm: Steel, Yellow Zinc, 8 Micron # Steel, right Zinc # Stainless Steel # on request 100 mm Height: 50mm MOEL 26 1 Hole f/m8 or M10 olt 32 mm 50 mm Steel thickness 1,5mm: Steel, Yellow Zinc, 8 Micron # Steel, right Zinc # Stainless Steel # on request 48 mm ø 5 mm Steel thickness 2,0mm: Steel, Yellow Zinc, 8 Micron # Steel, right Zinc # Stainless Steel # on request 47

48 13 LEG ORNER RKETS, NUTS & WING NUT MOEL 27 Height: 32mm 1 Hole f/m8 or M10 olt Steel thickness 2,0mm: Steel, Yellow Zinc, 8 Micron # Steel, right Zinc # Stainless Steel # on request 16 mm 80 mm 54 mm ø 5 mm 32 mm HEXGONL NUT IN 934 Finish: Steel Yellow Zinc or right Zinc Size: Item No.: M6 # /906 M8 # /16 M10 # /27 M6 to M10 M6 to M10 HEXGONL NUT WITH NYLON RING IN 985 Finish: Size: Item No.: M6 # M8 # M10 # Steel and nylon Yellow Zinc or right Zinc (Stainless Steel on request) M6 to M10 M6 to M10 WRENH KEY F/HEX NUTS Hex: Steel Yellow Zinc Plated 8 mm (others on request) 86 mm Item No.: Hardened steel # Unhardened steel # mm 12 mm WING NUT Finish: Steel Yellow Zinc or right Zinc 48 Size: Item No.: M6 # /51 M8 # /58 M10 # /61 M6 to M10

49 LOKING PIN & HOOKS LOKING PIN»EPOMO«Size: Screw holes: Steel ody: 20 x 61 mm Pin: Ø 8 x 11 mm Ø 4,5 mm Finish: Yellow Zinc # mm ø 8 mm Ø4,5 mm 11 mm 61 mm 20 mm Pull back the Pin TLE HOOK»E LUXE«Total Size: Hook opening: Screw hole: Zamak 23,5 x 53,5 mm 7 mm Ø 4 mm Finish: Nickel Plated # Yellow Zinc # ,5 mm 2,5 mm 53,5 mm 23,5 mm Ø4 mm 36 mm TLE HOOK»# 7864«Total Size: Screw hole: Steel 1,60 mm 18 x 51,5 mm Ø 3,5 mm Finish: Yellow Zinc # mm 51,5 mm 18 mm 15,4 mm Ø3,5 1,6 mm 33 mm 49

50 HNGEROLTS & WSHERS HNGEROLTS Finish: Steel Yellow Zinc or right Zinc (Stainless Steel on request) Size Item No.: Size Item No.: M4 x 25 mm # M8 x 100 mm # /38 M4 x 50 mm # M10 x 50 mm # M6 x 50 mm # /08 M10 x 60 mm # /61 M6 x 60 mm # /17 M10 x 70 mm # M8 x 50 mm # /23 M10 x 80 mm # M8 x 60 mm # M10 x 90 mm # M8 x 70 mm # /32 M10 x 100 mm # M8 x 80 mm # M10 x 120 mm # 12, Other sizes on request M4 to M10 TOOL FOR INSERTING HNGEROLTS Size Item No.: M6 # M8 # M10 # mm M6 to M10 WSHERS Steel, Yellow Zinc Plated or right Zinc Plated rass, Natural Stainless Steel, Natural Spring washer Serrated lock washer Sizes: Inner diameter 6,4/8,4 & 10,5 mm Type: Flat washer IN 125- Spring washer IN 127 Serrated lock washer IN 6798 Flat washer Item No etc. 50

51 NYLON WSHERS & VRIOUS STINLESS STEEL SREWS, NUTS & WSHERS NYLON WSHERS Polyamid (P), natural. Item - number diameter d diameter H height # mm 2,5 mm 0,5 mm # mm 4,3 mm 1,5 mm # mm 8,6 mm 2 mm # mm 8,6 mm 2 mm # mm 8,4 mm 1,5 mm # mm 10,5 mm 2 mm # mm 13 mm 2 mm # mm 10,5 mm 2,5 mm # mm 10,5 mm 2,5 mm # mm 13 mm 2,5 mm # mm 17 mm 3 mm *Other sizes and colors on request. Minimum quantity: 1000 pcs d H VRIOUS STINLESS STEEL SREWS, NUTS & WSHERS sk for any screw, nut & washer in stainless steel and we will quote you. No stock item. ll on request 51

52 TWISTER - THE LEG ONNETOR PTENTE TWISTER - LEG ONNETOR The Twister leg connector is designed for installing a leg in any position from 0 20 degrees one way, simply by twisting the leg tightly onto the connector plate. May be used on tables, cabinets, beds, sofas ect. wherever a leg is needed. Twister gives the possibility to change the design on the furniture whenever there is a demand. Furthermore it may be used as a height adjuster/leveller in case of uneven floors. djustable up to 40mm when changing the angle from 0 20 degrees. Twister is designed for maximum leg diameter of 50mm and M8 bolt. The round sliding plate and body are made of black reinforced S. The internal part is made of steel. anish design by SISO & Jesper Møller Hansen. Pat. Pending in EU & US. (Leg: customer provided) 52

53 TWISTER - THE LEG ONNETOR Total size: Screw holes: Reinforced S & steel Ø 106,5 x 27 mm Ø 5,5 mm Item No.: Packing: 1 pce pr. inner box Screws and hangerbolt to be bought separately. Ø 5,5 mm Positioning marks for easy mounting M8 thread 106, M E 53

54 LZY SUSN LZY SUSN LUMINIUM TURNTLE pplication: Ring: 1 st grade aluminium, ie ast alls: High grade stainless steel (grade 200) 360 egree easy swivelling, apply to any kind of dining table, TV-stand, computer tables etc. lso perfect for outdoor use when using stainless steel ball bearings. Outer diameter Load Top ottom Sizes Item. No.: apacity Out In Out In Inner diameter White rubber Ø10 x 3,3 mm Ø5,5 mm SK Holes Ø5,5 mm SK Holes White rubber Ø10 x 3,3 mm Ø304 x 12mm Ø247mm # kg Ø401 x 12mm Ø338mm # kg Ø600 x 12mm Ø528mm # kg

55 TH # mm 25 mm 70 mm atch #22 is a patented version of the traditional table catch. This new model holds itself flat underneath the table top and spare leaves in both the locked and unlocked position. Flat to base, even when unlocked - see picture -. The old version always hung loose underneath the table and from spare leaves when not in use. This could easily cause damage to surfaces and edges, particulary on tables fitted with folding»butterfly«extension leaves and even to peoples legs and clothing. atch #22 Stainless Steel, Polished 304 # Steel, ronzed Plated # Steel, Yellow Zinc Plated # Steel, right Zinc Plated # Steel, lack e-coating # Fixation: Wood Screws: Ø 4 mm x 16 mm, Pan Head Standard packing: 600 Pcs. per carton. esides the standard version we also offer the atch #22 with a 60 mm long hasp for tables with chamfered edges. Material Steel, Yellow Zinc Plated # Patent: UK Pat No United States Patent 6,041,721 EP Pat. No

56 N drilling required 1 Male + 1 female - lu finish # Female part only - lu finish # Wood screw Ø4 x 16 mm, ZP # Fifteen screw M6 x 25 mm, black # Screw-in bushing E-620, zamak M6 x 20 mm, YZP #

57 SURF - THE TLE ONNETOR 123,60 PTENTE 33 4 x Ø Ø ,60 2 x Ø5 Table edge 47 mm 33 mm 180 mm 60 mm 50 mm 100,6 mm 23 mm 10 mm 11,5 mm 57

58 PINS & SPNNERS rass Size: Ø8 x 21,5 mm Finish: Natural Item No.: Male # Female # Size: Finish: LOTING PINS Steel Ø8 x 22 mm Yellow Zinc 8 Micron or right Zinc 3 Micron Item No.: Male - ZP # Female - ZP # Male - YZP # Female - YZP # Steel Size: Ø8 x 22 mm Finish: Yellow Zinc 8 Micron Item No.: Male & Female # Nylon Size: Ø8 x 26 mm Finish: rown Item No.: Male # Female # rass Size: Ø10 x 25 mm Finish: Natural Item No.: Male # Female # Steel Size: Ø10 x 26,2 mm Finish: Yellow Zinc 2-3 Micron Item No.: Male & Female # mm 11 mm 11 mm 12 mm 13 mm 12,5mm 13 mm 10,5 mm 11 mm 11 mm 10 mm 13 mm 12,5mm 13 mm IRULR TLE SPNNER Zamak, 3 mm Screw hole: Ø 3,5 mm iameter: Ø 60 mm Item No.: rass Plated # Item No.: Nickel Plated #

59 HINGES VII HINGE - ZMK w/ STEEL LINKGE O Material ody: Zamak Linkage: Steel Finish: Yellow Zinc Plated (YZP) Size: 44 x 12,5 mm Screw Hole: Ø 4 mm - c/c 32 mm Item No.: # Other sizes and finishes on request , ,75 12,50 12,5 17, ,25 VII HINGE - ZMK w/ SS LINKGE O Material ody: Zamak Linkage: Stainless Steel (SS) Finish: ody: Stainless Steel look- rushed Linkage: Plain Incl. 4 SK chip board screws E F G H I J K Item No. 45 mm 13 mm 21 mm 32 mm 8 mm 7 mm 18,5 mm 12 mm 5 mm 6,5 mm 4 mm mm 13 mm 21 mm 47 mm 9 mm 7 mm 32 mm 12 mm 6 mm 7,5 mm 5 mm mm 16 mm 26 mm 55 mm 11 mm 8 mm 34 mm 16 mm 7 mm 8 mm 5 mm mm 19 mm 32 mm 75 mm 13,5 mm 10 mm 51,5 mm 17 mm 10 mm 10 mm 6 mm E F K J I H G 59

60 HINGES ELU TLE HINGE 180 o Over all Size: Steel, Yellow Zinc Plated (YZP) 85 mm x 46 mm Panel Size X Item No. Panel Size X Item No. 16 mm # mm # mm # mm # mm # Ø 4mm 21,5 mm 85 mm Spacer For Panel Thickness Reduction = SFPTR* SFPTR* Item No. SFPTR* Item No. 1 mm # mm # The Spacer gives you the possibility to operate with only one hinge size even though you use different panel thicknesses in your production. Example given: Take a Hinge for 18 mm panel thickneses and add a 2 mm spacer. Now you can use the hinge for 16 mm panel thickness. X 46 mm X-tra Spacer 1,5 TLE FLP HINGE - f/ 22 mm PNEL o ody: Linkage: ore Size: Hole epth: Nylon Zamak Ø 35 mm and Ø 25 mm 19 mm 24,5 24,5 mm 35mm 35 Finish ody: Linkage: Item No. eige Yellow Zinc # lack lack Zinc # , Ø35 mm

61 HINGES SEP HINGE 180 o Zamak Panel thickness: Min. 26 mm Size: 52 x 18 x 2 mm Item No. # Overlay door 45 Inset door Table leaves TLE FLP HINGE ZMK ody: Zamak, Yellow Zinc Plated Linkage: Steel, Yellow Zinc Plated Over all size: 108 x 40 x 3 mm Panel size: 20 mm # Panel size: 27 mm # RSS YLINER HINGE w/ SS PIN & SREWS ody and Linkage: rass Natural Pin and Screws: Stainless Steel (SS) Sizes Item No * * Ø 10 mm # ,0 mm 2,0 mm Ø 12 mm # ,5 mm 2,2 mm Ø 14 mm # ,5 mm 3,0 mm Ø 16 mm # ,5 mm 3,0 mm Ø 18 mm # ,5 mm 3,0 mm Ø 24 mm # ,0 mm 4,5 mm Ø * See illustration and for measurement 61

62 NOTES 62

63

64 Item No.: SISO /S Mileparken 11 K Skovlunde (openhagen) Phone: (+45) Fax: (+45) enmark siso@siso.dk Web: