aero naut Drive systems for aircraft applications

Transcription

1 aero naut Drive systems for aircraft applications

2 CAM folding propeller The new generation of folding propellers from Rudolf Freudenthaler, exploiting CAM technology. The very thin, carefully optimised blade profile and computer-calculated airfoil sections guarantee very high accuracy and excellent efficiency combined with low power absorption from the electric motor. All blades are made exclusively from a mixture of fibres and nylon, which has proved excellent in our propellers over many years, as it endows the blades with very high torsional rigidity. These blades are very light in weight thanks to the extremely thin blade profile and the materials employed.

3 Size 6,0x 6,0" 7,0x 6,0" 7,0x 4,0" 7,0x 6,0" 8,0x 4,0" 8,0x 5,0" 8,0x 5,0" 8,0x 6,0" 8,0x 7,0" 9,0x 6,0" 9,0x 4,0" 9,0x 5,0" 9,0x 7,0" 9,5x 5,0" 9,5x 6,0" 9,5x 7,0" 7/08 7/ 74/08 74/ 74/ 74/6 7/7 74/7 74/8 74/0 74/4 74/9 74/ 74/6 74/9 74/ max. rpm blade root Size 0,0x 5,0" 0,0x 4,0" 0,0x 6,0" 0,0x 7,0" 0,0x 8,0" 0,0x,0",0x 4,0",0x 5,0",0x 6,0",0x 7,0",0x 8,0",0x 8,0",0x0,0",0x,0",0x 5,0",0x 6,0",0x 6,5",0x 8,0",0x 9,0",0x0,0",0x,0",0x,0",5x 6,0",5x 7,5",5x 9,0",0x 8,0",0x 5,0",0x 6,5",0x0,0",0x,0" 4,0x 6,0" 4,0x 8,0" 74/0 74/7 74/8 74/ 74/ 74/ 74/7 74/0 74/9 74/4 74/ 7/ 74/4 74/4 74/ 74/ 74/46 74/50 74/5 74/49 74/47 74/ 74/6 74/5 74/55 74/ 74/65 74/58 74/6 74/59 74/ 74/68 max. rpm blade root Size 4,0x 9,0" 4,0x0,0" 4,0x,0" 4,0x,0" 5,0x 8,0" 5,0x 6,0" 5,0x0,0" 5,0x,0" 5,0x,0" 6,0x 8,0" 6,0x 6,0" 6,0x0,0" 6,0x,0" 7,0x 7,0" 7,0x 8,0" 7,0x 9,0" 7,0x0,0" 7,0x,0" 7,0x,0" 8,0x 6,0" 8,0x 7,0" 8,0x 9,0" 8,0x,0" 8,0x,0" 8,5x 8,0" 8,5x0,0" 8,5x,0" 8,5x4,0" 8,5x5,0" 0,0x 8,0" 0,0x0,0" 0,0x,0" 74/67 74/69 74/66 74/80 74/7 74/77 74/7 74/79 74/7 74/74 74/78 74/ 74/76 74/8 74/84 74/87 74/85 74/88 74/90 74/89 74/9 74/9 74/94 74/96 74/95 74/98 74/97 74/99 74/8 7/ 7/ 7/44 max. rpm blade root

4 CAM Light Prop This range of propellers is intended for electric motors, and has been developed to generate high levels of thrust even at low rotational speeds. This is accomplished by using a thin blade section of wide chord. This series represents light, strong and torsionally rigid -reinforced propellers. They are also an excellent choice for multicopter models, and certain sizes can be used in pairs (left and right-hand rotation). These propellers were developed using a CAD system in order to ensure accurate blending of blade pitch and airfoil. The blade shape is identical to that of our proven Cam-Carbon folding propellers, but the hubs are smaller and therefore lighter. The moulds - produced using CNC machines - and the fibre reinforced propellers themselves are manufactu exclusively in Germany. Each propeller is supplied with a set of spacer rings to suit the following shaft diameters: 5, 6, 6. and 7 mm. Tipp Specially designed for electric flight and multi-rotor systems

5 Size 8x4,5" 9x4,5" 9x5" 9x6" 9,5x4,5" 0x4,5" 0x5" 0x6" 0x7" x4,5" x5" x6" x7" x4,5" x5" x6" x7" x5" x6" x7" x8" 4x5" 4x6" 4x8" 4x9" 5x6" 5x8" 5x9" 6x6" 6x9" 6x0" ccw 76/ 76/5 76/6 76/7 76/8 76/0 76/ 76/ 76/ 76/7 76/8 76/9 76/0 76/ 76/4 76/5 76/ 76/ 76/4 76/ 76/4 76/46 76/47 76/50 76/5 76/5 76/55 76/56 76/60 76/ 76/64 cw 77/ 77/5 77/6 77/8 77/0 77/ 77/7 77/8 77/ 77/4 77/5 77/ 77/4 77/ 77/4 77/46 77/47 77/5 77/60 max. rpm NEU Racing-Pack incl. cw and ccw props 5x4" / 6x" / 6x4" /

6 CAM Light Prop-s These propellers are available in clockwise and anti-clockwise versions, and feature a press-fitted metal threaded insert. This means that the props can be screwed directly onto electric motors with an threaded shaft, and require no further retention. The metal caps feature a 4 mm bore, allowing the propellers to be dynamically balanced before use. This range of propellers is intended for electric motors, and has been developed to generate high levels of thrust even at low rotational speeds. This is accomplished by using a thin blade section of wide chord. This series represents light, strong and torsionally rigid -reinforced propellers. They are also an excellent choice for multicopter models, and certain sizes can be used in pairs (left and right-hand rotation). These propellers were developed using a CAD system in order to ensure accurate blending of blade pitch and airfoil. The blade shape is identical to that of our proven Cam-Carbon folding propellers, but the hubs are smaller and therefore lighter. The moulds - produced using CNC machines - and the fibre reinforced propellers themselves are manufactu exclusively in Germany. 4

7 Size Threat ccw cw max. rpm for copter * 8x4,5" 9x4,5" 9x5" 9,5x4,5" 0x4,5" 0x5" 0x5" x4,5" x5" x4,5" x5" x5" x 74/ 74/5 74/6 74/8 74/0 74/ / 74/7 74/8 74/ 74/4 /0 / /5 /6 /8 /0 / / /7 /8 / /4 / DJI Phantom DJI Phantom Blade Chroma Yuneec Q500+ *non-inding recommendation, propeller with special threat. The instructions of the copter manufacturer on how to fix the propellers have to be followed. Motor not included

8 CAM Power-Prop A new range of propellers for internal combustion engines and electric motors alike, offering superb efficiency. These props are based on the outstandingly successful range of Cam Carbon folding propellers. The thin blade profile has been thickened slightly, and the hub transition area strengthened. In conjunction with the fibre reinforced material the result is a propeller with a relatively thin, low-drag section and very good torsional stiffness, combined with low weight. These propellers were developed using modern CAD systems in order to obtain accurate profiling with precisely calculated washout along the blade. The moulds were then CNC-machined to ensure that both blades are absolutely identical; this is essential for producing propellers with as fine a dynamic balance as possible. All propellers have an Ø bore except the 7 x 7", which has a stepped 6 / Ø bore.

9 Size 7x 7" 9x 4" 9x 5" 9x 6" 9x6,5" 9x 7" 9x 9" 0x 5" 0x 6" 0x6,5" 0x 7" 0x 8" 0x0" x 5" x 6" x 7" x 8" x 9" x 6" x 7" x7,5" x 8" x 9" x0" x 6" x 8" x 9" clockwise 76/09 76/5 76/6 76/7 76/0 76/8 76/9 76/ 76/ 76/6 76/ 76/4 76/7 76/8 76/9 76/0 76/ 76/ 76/5 76/ 76/4 76/7 76/ 76/9 76/4 76/4 76/44 anti-clockwise 77/ 77/ 77/7 77/44 max. rpm Size x0" x" x" 4x 6" 4x 7" 4x 8" 4x 9" 4x0" 4x" 4x" 5x 5" 5x 6" 5x 7" 5x 8" 5x 9" 5x0" 5x" 5x" 5x4" 6x 7" 6x 8" 6x 9" 6x0" 6x" 7x0" 8x0" clockwise 76/ 76/46 76/47 76/48 76/49 76/50 76/5 76/5 76/5 76/54 76/55 76/56 76/ 76/58 76/59 76/60 76/6 76/ 76/64 76/67 76/68 76/69 76/ 76/7 76/80 76/90 anti-clockwise 77/5 max. rpm

10 CN-Spinner (Cool Nose) Turbo-spinners with integral cooling system. CNC machined aluminium backplate for accurate truerunning, plastic spinner cap for front fixing, taper collet. Spinner Ø0mm will be delive with a special propeller hub (74/9) instead of an aluminium backplate. Spinner-Ø motor shaft,00mm,0mm,00mm,7mm,00mm,0mm,00mm,7mm,00mm,0mm,00mm,7mm,00mm,0mm,00mm,7mm,00mm,0mm,00mm,7mm 9/00 9/0 9/0 9/0 9/04 9/05 9/06 9/0 9/ 9/ 9/ 9/4 9/5 9/6 9/ 9/4 9/ 9/4 9/44 9/ 9/46 9/50 9/5 9/5 9/5 9/54 9/55 9/56 9/60 9/6 9/6 9/ 9/64 9/65 9/66 Spinner-Ø motor shaft,00mm,0mm,00mm,7mm,00mm,0mm,00mm,7mm,7mm,7mm,7mm item no. 9/ 9/7 9/7 9/7 9/74 9/ 9/76 9/80 9/8 9/8 9/8 9/84 9/85 9/86 9/ 9/4 9/5 9/6 9/ 9/4 9/5 9/ 9/9 9/94 9/95 9/96 760/04 760/05 760/06 760/4 760/5 760/6 760/4 760/5 760/6

11 Spinner-Ø 50 motor shaft,00 mm,0 mm,7mm,00 mm,0 mm,7mm,00 mm,0 mm,7mm,00 mm,0 mm,7mm,00 mm,00 mm,0 mm,7mm,00 mm,00 mm /0 / / / /4 /5 /6 /00 /0 /0 /0 /04 /05 /06 /0 / / / /4 /5 / /0 / / / /4 /5 /6 /0 /47 /48 /49 /4 /44 / /46 /04 /05 Precision spinners -blade spinner Spinner-Ø blade spinner Spinner-Ø Motor shaft,7 mm,7 mm,7 mm,7 mm motor shaft,7 mm 5/0 5/0 5/04 5/05 5/06 5/ 5/ 5/4 5/5 5/6 5/ 5/ 5/4 5/5 5/ 5/6 5/ 5/64 5/65 5/66 4/ 4/4 4/44 4/ 4/46

12 Aluminium-plastic spinner for fix propellers A machined aluminium backplate ensures perfect concentricity. The backplate fits mm shafts, adapter rings for 7, 8 or 0 mm shafts are included for a variety of applications. This spinner is not for folding props. The spinner is made of shock-resistant plastic and is available in,,, appearance, and some metalic colours. Spinner-Ø colour metalic-orange metalic-yellow metallic- metallic-blue metalic-orange metalic-yellow metallic- metallic-blue 8/0 8/0 8/04 8/05 8/ 8/ 8/ 8/4 8/5 8/ 8/ 8/ 8/4 8/5 7/ 7/ 7/ 7/4 8/ 8/ 8/ 8/4 8/5 7/ 7/ 7/ 7/4 Spinner-Ø colour metalic-orange metalic-yellow metallic- metallic-blue metalic-orange metalic-yellow metallic- metallic-blue metalic-orange metalic-yellow metallic- metallic-blue 8/4 8/ 8/4 8/44 8/ 7/4 7/ 7/4 7/44 8/5 8/5 8/5 8/54 8/55 7/5 7/5 7/5 7/54 8/6 8/6 8/ 8/64 8/65 7/6 7/6 7/ 7/64

13 Spinner-Ø colour metalic-orange metalic-yellow metallic- metallic-blue 8/7 8/7 8/7 8/74 8/ 7/7 7/7 7/7 7/74 8/8 8/8 8/8 8/84 8/85 8/9 8/9 8/9 8/94 8/95

14 Yoke A reliable connection - aluminium yoke for -blade, -blade and 4-blade folding propellers. Fits all aero-naut propellers and spinners for folding propellers blade yoke Length 4 mm mm mm mm mm mm mm mm 47 mm 47 mm 47 mm 47 mm 47 mm 47 mm 5 mm 5 mm 5 mm 5 mm 5 mm 5 mm 7 mm 7 mm 8 mm Offset -5 -,5 +, ,5 +, ,5 +,5 +5 +,5 +,5 Bore mm mm mm Blade root 74/9 7/0 7/ 7/0 7/ 7/ 7/ 7/ 7/4 7/6 7/ 7/5 7/6 7/7 7/8 7/ 7/4 7/9 7/0 7/5 7/6 7/64 7/ 7/ 7/ 7/47 7/4 Fig. none* -blade yoke Length mm 47 mm Offset Bore Blade root 7/ 7/ Fig blade yoke Length mm 47 mm Offset Bore Blade root 7/5 7/5 Fig. 5 5 * fits CN-Spinner 0mm (9/00../06)

15 Propeller taper collet 74/5 74/4 74/¹ 74/9 74/4 74/ 74/¹ 74/7 74/04 74/54 74/7² 74/55² 74/05² 74/56² 74/48 74/49 74/58 74/59 Motor shaft,00 mm,00 mm,0 mm,0 mm,7 mm,7 mm 8,00 mm 0,0 mm 8,00 mm 0,0 mm Shaft-Ø mm mm mm mm Thread Mx,5 Mx,5 Mx,5 Mx,5 Length 5 mm 5 mm 5 mm 5 mm 5 mm 5 mm 5 mm mm mm mm mm Front bore M M M Fig. Propeller / spinner collet These collets fit all folding propellers and fix propellers. Prop-shaft adapter for folding propellers Motor-shaft 74/ ² 74/08,7 mm 74/ 74/44 74/09 74/ 74/ 74/46 ² Shaft-Ø Thread Length 5 mm 5 mm 5 mm Front bore Fig. Prop-shaft adapter for fix propllers 74/07 74/ 74/0 74/4 74/5 Motor-shaft,0 mm,7 mm Shaft-Ø 6/ 6/ Thread Length mm mm mm mm 5 mm Front bore M M M Fig. ¹ conical washer - bore 6mm with adapter for 8mm yoke ² from steel

16 aero naut aero-naut Modellbau GmbH & Co KG Stuttgarter Strasse 8 D-7766 Reutlingen Made in Germany Multicopter Electric glider Electric aircraft Motor aircraft Information related to this brochure: Items shown in this brochure and technical specifications are subject to change. Pictures are non-binding. The max. rpm value must not be exceeded at any time. Recommendations are without obligation. The user is responsible for the correct choice of components and their use in operation. This brochure shows an extract from our main catalogue. Deliveries through our retail network. Last update March 06. V4-0/6