Bronze Connectors for Flat Bar TYPE HSS. Ordering Information. or
|
|
- Poppy Anabel Mitchell
- 6 years ago
- Views:
Transcription
1 ronze onnectors for Flat ar ronze onnectors for Flat ar TYPE SS Low Mount orizontal us Support low mount horizontal bus support for mounting flat bar to the cap or base of an insulator. For cap mounting cap screws are furnished and for base mounting bolts and nuts are furnished. Unless otherwise specified, clamps are supplied for cap mounting. opper lloy 1/4 1 1/4 45º DIMENSIONS IN INES TLOG NUMER IDT IN RS () OLT IRLE OLT SIZE SS /16 3/8 SS /16 3/8 SS /16 3/8 SS /16 3/8 SS /4 1/2 SS /4 1/2 SS /8 5/8 SS /8 5/8 SS /8 5/8 SS /8 5/8 or , FL, all rights reserved
2 ronze us Supports ronze us Supports TYPE SS, SS Pedestal us Support For Multiple Flat ar Type SS provides for bolt circle mounting on a 3 inch or 5 inch bolt circle. Type SS is a center mounting clamp for horizontal supporting of flat bus. ap screws are furnished for cap mounting and bolts and nuts are furnished for base mounting. Unless otherwise specified clamps are supplied for cap mounting. opper lloy SS 1 SS 45º TLOG NUMER DIMENSIONS IN INES 0LT SS SS IRLE ENTER OLT OLT SIZE SS2-3 SS /4 3 5/16 2 3/4 3/8 SS2-5 SS /16 2 3/4 3/8 SS3-3 SS /4 4 5/16 3 3/4 3/8 SS3-5 SS /16 3 3/4 3/8 SS4-3 SS /4 5 3/4 4 3/4 1/2 SS4-5 SS /4 4 3/4 1/2 SS5-3 SS /4 7 1/8 5 3/4 5/8 SS5-5 SS /8 5 3/4 5/8 SS6-3 SS /4 8 1/8 6 3/4 5/8 SS6-5 SS /8 6 3/4 5/8 SS-2 SS /4 3 5/16 2 3/4 3/8 SS-3 SS /4 4 5/16 3 3/4 3/8 SS-4 SS /4 5 3/4 4 3/4 1/2 SS-5 SS /4 7 1/8 5 3/4 5/8 SS-6 SS /4 8 1/8 6 3/4 5/8 or , FL, all rights reserved
3 ronze us Supports ronze us Supports TYPE S, SD, S, SD horizontal bus support for supporting one or more flat bus bars in a horizontal position. The following supports do not include spacers. The double group type includes a single wide spacer only. opper lloy S dd suffix to catalog number for the number of bars to be supported. EX: SV4-3-4 S S S TLOG NUMER IDT OF DIMENSIONS IN INES RS OLT IRLE S SD S SD S2-3 SD2-3 S2-3 SD /16 3 5/16 2 1/8 2 S2-5 SD2-5 S2-5 SD /16 3 5/16 2 3/8 2 S3-3 SD3-3 S3-3 SD /16 4 5/16 2 1/8 3 S3-5 SD3-5 S3-5 SD /16 4 5/16 2 3/8 3 S4-3 SD4-8 S4-3 SD /4 5 3/4 2 1/4 4 S4-5 SD4-5 S4-5 SD /4 5 3/4 2 1/2 4 S5-3 SD5-3 S5-3 SD /4 6 3/4 2 3/8 5 S5-5 SD5-5 S5-5 SD /4 6 3/4 2 5/8 5 S6-3 SD6-3 S6-3 SD /8 8 1/8 2 3/8 6 S6-5 SD6-5 S6-6 SD /8 8 1/8 2 5/8 6 or , FL, all rights reserved
4 ronze us Supports ronze us Supports TYPE SV, SVD, SV, SVD Vertical us Support lamps vertical support clamp for supporting one or more flat bus bars in a vertical or upright position. SV and SV does not include a spacer, SVD and SVD includes a single wide spacer only. opper lloy Suffix to the catalog number the number of bars to be supported. EX: SV4-5-4 SV 3/8 3/8 SV SV 45º 45º 45º 45º SV SLOT "S" L L SLOT "S" TLOG NUMER TLOG NUMER DIMENSIONS IN INES SV SVD SV SVD IDT OF RS OLT IRLE L SV2-3 SVD /4 SV2-3 SVD / /4 4-7/16 8-1/8 SV2-5 SVD /4 SV2-5 SVD / /4 4-7/16 8-1/8 SV3-3 SVD /4 SV3-3 SVD / /4 5-7/16 8-1/8 SV3-5 SVD /4 SV3-5 SVD / /4 5-7/16 8-1/8 SV4-3 SVD /4 SV4-3 SVD / /4 6-3/4 8-1/8 SV4-5 SVD /4 SV4-5 SVD / /4 6-3/4 7-1/8 SV5-3 SVD /4 SV5-3 SVD / /4 7-3/4 7-1/8 SV5-5 SVD /4 SV5-5 SVD / /4 7-3/4 7-1/8 SV6-3 SVD /4 SV6-3 SVD /4 8-15/16 7-1/8 SV6-5 SVD /4 SV6-5 SVD /4 8-15/16 7-1/8 or , FL, all rights reserved
5 ronze us Supports ronze us Supports TYPE SVS, SVS Sliding Vertical us Support For Multiple Flat ars Four types of sliding bus support clamps for supporting one or more flat bars in a vertical or upright position. The slotted base provides for 1 1/4 inch of axial traverse. ccommodates any number of bars. Types SVSD and SVSD allows for double stack mounting by the provision of a 2 3/8 inch spacer for single or multi-bar systems. Unless otherwise specified types SVS and SVS are supplied without spacers and types SVSD and SVSD are supplied with only the 2 3/8 inch double stack spacer. Supplied with cap screws for cap mounting or bolts and nuts for base mounting. opper lloy SVS Everdur bolts, nuts, lockwashers, flat washers, and stainless steel cotter pin For additional spacers for 1/4 inch bars spaced 1/4 inch apart please contact FL hen ordering add the number of bars to be supported to the end of the catalog number and state bar thickness if other than 1/4 inch. Example: SVS3-3-4 SVS SVS SVS M L TLOG NUMER IDT DIMENSIONS IN INES SVS SVS OF RS M OLT IRLE L OLT SIZE SVS3-3 SVS /16 1 3/8 5 3/8 7 3/8 3/8 SVS3-5 SVS /16 1 1/2 5 1/2 9 3/8 3/8 SVS4-3 SVS /4 1 7/8 6 3/4 7 7/8 1/2 SVS4-5 SVS / /8 9 5/16 1/2 SVS5-3 SVS /4 1 7/8 7 3/4 7 7/8 1/2 SVS5-5 SVS / /8 9 5/16 1/2 SVS6-3 SVS /4 1 7/8 8 3/4 7 7/8 1/2 SVS6-5 SVS / /8 9 5/16 1/2 or , FL, all rights reserved
6 ronze us Supports ronze us Supports TYPE SS, SSD orizontal Sliding us Support horizontal type sliding bus support clamp for supporting one or more flat bars. The axle type support with slotted bracket provides for a 1 1/4 inch traverse. ccommodates any number of bars. Type SSD allows for double stack mounting by the provision of a 2 3/8 inch spacer for single bar or multi-bar systems. Unless otherwise specified type SS is supplied without spacers and type SSD is supplied with only the 2 3/8 inch double stack spacer.. Supplied with cap screws for cap mounting or bolts and nuts for base mounting. opper lloy Everdur bolts, nuts, lockwashers, flat washers, and stainless steel cotter pin hen ordering suffix the number of bars to be supported to catalog number and state bar thickness if other than 1/4 inch. For additional spacers for 1/4 inch bars spaced 1/4 inch apart please contact Dossert. 1 1/4 TLOG NUMER IDT OF OLT DIMENSIONS IN INES OLT US RS IRLE SIZE SS2-3 SSD /16 2 1/8 6 3/4 3/8 SS2-5 SSD /16 2 1/4 6 3/4 3/8 SS3-3 SSD /16 2 1/8 6 3/4 3/8 SS3-5 SSD /16 2 1/4 6 3/4 3/8 SS4-3 SSD /4 2 1/4 7 1/4 1/2 SS4-5 SSD /4 2 1/2 7 1/4 1/2 SS5-3 SSD /4 2 3/8 7 3/8 1/2 SS5-5 SSD /4 2 5/8 7 3/8 1/2 SS6-3 SSD /4 2 3/8 7 3/4 1/2 SS6-5 SSD /4 2 5/8 7 3/4 1/2 IDT OF US RS or , FL, all rights reserved
Bronze Parallel, Cross, and Bar Taps TYPE GPEX. Ordering Information. or
TYPE GPEX opper Universal lamp For able A versatile connector which takes a range of conductor sizes in two positions. olt positions held to NEMA standards enabling cable or pipe to be bolted directly
More informationNotes For Grade Five galvanized steel hardware, add "-GS5" to catalog number. EX: PSD400-7-V-AA-GS5
TYPE PSD-V-, PSD-V-H- olted us Support, Pipe, Slide or Tight Fit Double ring support is designed to be corona free for 345 kv and 500 kv service. Support is designed to be slip or tight fit depending on
More informationm a g n u m ha r v e s t e r t h r e e an d fi v e ga n g as s e m b l y (Three Gang), (Five Gang)
0 Nordic Drive Cedar Falls, Iowa 0 USA Phone:.00. Fax:.. t h r e e an d fi v e ga n g as s e m b l y 0000 (Three Gang), 000 (Five Gang) /Page Number A-Frame Assembly Front Gang Assembly Back Gang Assembly
More informationSpecifications. S&C Loadbuster Disconnect Switches Outdoor Distribution (14.4 kv through 34.5 kv)
Outdoor Distribution ( kv through 34.5 kv) Specifications Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet 150 apply. SPECIAL TO THIS PRODUCT: INCLUSIONS: All
More information31AS2B5-790 (2006) Page 1 of 7 Drive Assembly
31AS2B5-790 (2006) Page 1 of 7 Drive Assembly 31AS2B5-790 (2006) Page 2 of 7 Drive Assembly 1 629-0071 1 S Extension Cord 2 710-0409 4 /P Hex Screw, 5/16-24 x 1.75 3 710-0627 1 /P Hex Screw, 5/16-24 x.75
More informationSpecifications. S&C Loadbuster Disconnects a Outdoor Distribution (14.4 kv through 34.5 kv)
a Outdoor Distribution ( kv through 34.5 kv) Specifications Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet 150 apply. SPECIAL TO THIS PRODUCT: INCLUSIONS: All
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HS300 QUART MIXER ML-134453 ML-134473 ML-134474 ML-134475 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43192 (July 2009) - 2 - HOBART 2009 Table of Contents
More informationSP-325, SP-575X, SP-1075X Single-Stage Tailgate Spreaders
September 15, 2014 Lit. No. 43827, Rev. 01 SP-325, SP-575X, SP-1075X Single-Stage Tailgate Spreaders Parts List This Parts List is for SnowEx single-stage tailgate spreaders with serial numbers 140502300135
More informationType NT and Type ZWM Terminal Blocks
Type NT and Type ZWM Terminal Blocks Unit-pole construction Sliding link to permit testing without disturbing wiring High barriers that prevent shorting between poles Class 1E qualified per IEEE RECOGNIZED
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HS600 MIXER HS600 HS600 HS600CE HS600CE ML-141022 ML-141023 ML-141024 ML-141025 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43232 (December 2010) TABLE
More informationthis harness plugs into the back of the Digital Control Center and has individual sets of wires for each electrical component in the hopper shell
54076 Auger end cap used to hold the auger and the auger motor in place $ 10.00 $ 6.00 54077 Auger Lock collar used to attach the auger shaft to the gearbox shaft $ 10.00 $ 6.00 50102 Auger motor - 2 rpm
More informationSensor Mounting Shells and Adaptors
Effective: June 2001 (replaces May, 1994) EX-1690 Sensor Mounting Shells and Adaptors Part Numbers and Applications Guide to Tank Mounting Shells and Retrofit Adaptor Inserts for use with King-Gage AcraSensor,
More informationProducts Catalogue I. Mounting runners and components:
I. Mounting runners and components: 110111-R Mounting runner 40*40 mm M8 slot nut / M10 bolt length: 6.100 mm span width as per statics 110111-N 110112-R Mounting runner 40*40 mm with sideward screw channel
More informationAccessory Guide Indoor AP Accessories
Indoor AP Accessories INDOOR SKU Compatible Products Description Kit Contents 902-0120-0000 R720 R710 R700* R600* R610* R500* R510* R310 * fits AP, but does not support padlock security Multipurpose mounting
More informationParts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
More informationWC CAPELLA PB 400 REV07 PARTS MANUAL
NT WC CAPELLA PB 400 REV07 PARTS MANUAL FUTURE MOBILITY HEALTHCARE APPRECIATES YOUR BUSINESS. OUR CUSTOMER SERVICE REPRESENTATIVES CAN BE CONTACTED AT: TO PLACE ORDERS: (905) 671-1661 FOR YOUR CONVENIENCE
More informationISOLATION RELAY RACK ISOLATION KIT 19 RACK MOUNT RELAY RACK ISOLATION KIT, SLOTTED UNEQUAL FLANGE RACK ISOLATION KIT 23 RACK MOUNT
ISOLATION Info: 9070 = Isolation RELAY RACK ISOLATION KIT 19 RACK MOUNT 9070-1019 19" Rack Mount 23 RACK MOUNT 9070-1023 23" Rack Mount RELAY RACK ISOLATION (KIT) RELAY RACK ISOLATION KIT, SLOTTED 19 RACK
More informationAccessory Guide ZoneFlex Indoor AP Accessories
ZoneFlex Indoor AP Accessories INDOOR SKU Compatible Products Description Kit Contents 902-0120-0000 ZoneFlex R720 ZoneFlex R710 ZoneFlex R700* ZoneFlex R600* ZoneFlex R610* ZoneFlex R500* ZoneFlex R510*
More informationProfile Handles +DQGHO %DWDQJ 6 6.1
Profile Handles.1 Dim. A Dim. B 21 19.5 2,500 12.21.902 30 12.22.909 Dim. A Dim. B 11.5 19.5 2,500 12.20.905.2 Chrome plated Silver coloured anodized E/EV1 Stainless steel coloured Dim. A 300 295 12.2.201
More informationInstallation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
More informationThe Gradient Control Mat (GCM)
The (GCM) Technical Literature INTRODUCTION The gradient control mat by Dairyland is designed to limit step and touch potentials due to lightning because such design will also keep step and touch potentials
More informationSpacebar. Modular Microphone Positioning System. User Manual, Revision C, August, Spacebar Modular System User Manual Revision C Page 1 of 29
Spacebar Modular Microphone Positioning System User Manual, Revision C, August, 010 Spacebar Modular System User Manual Revision C Page 1 of 9 Table of Contents Standard pre-configured arrays:... 4 SB-SUR
More informationAMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
More informationHusqvarna X2000E. Illustrated Parts List ConstructionParts.com ConstructionParts.com. ConstructionParts.
Husqvarna X000E Illustrated Parts List -0 0 Jun 00 MAINFRAME ASSEMBLY 0 X000E 000 MAINFRAME ASSEMBLY, X000 000 SHSB, / x / 00 SHAFT, ARBOR LOCK 00 FRAME, ROLL CAGE, X000 0 COVER, BELT GUARD 00 COVER, BELT
More informationAIR CUSHION TECHNOLOGY
AIR CUSHION TECHNOLOGY Air Speed 5000 V3 PX3 PARTS CATALOG VER. 20110822 P1001 A5000 V1/V2/V3 BELT (TEFLON) P1021 A5000 V1/V2/V3 SMART V1/V2 KNIFE (SLITTER BLADE) P1112 A5000 V1/V2/V3 RUBBER NIP ROLLER
More informationFits 1 3/4" Resilient Rings. Part # Shaft Height A" 92-A /4" 4.4" 92-A /4" 4.6" Fits 2 1/2" Resilient Rings. Part # Shaft Height A"
Bases 48 Frame Resilient Mount Kit 92-A240 9" Blowers( 2 1/2" Rings) 92-A241 12" Blowers ( 2 1/2" Rings) 92-A242 10" Blowers (2 1/2" Rings) Accessories Base Mounting Adapter Kit For 5 1/2" with flat end
More informationSuperstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Spring Nut Selector Chart
Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and resistance
More informationAccessory Guide Indoor AP Accessories
Indoor AP Accessories INDOOR 902-0120-0000 R720 R710 R700* R600* R610* R500* R510* R310 * fits AP, but does not support padlock security Multipurpose mounting bracket for indoor AP s supports mounting
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL V-BOX SPREADER POLY DUAL ELECTRIC MODEL PDE00 - / CUBIC YARD MODEL PDE00 - / CUBIC YARD MODEL PDE800 - CUBIC YARD SPREADERS WITH SERIAL NUMBERS AFTER: PDE0000, PDE0000, 8PDE0000 CHUTES
More informationPCB Hardware. Contents
PC Hardware Contents SMT Test Points SMT Cable Clips Coin Cell Holders SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with
More informationMODEL R-502 ROUTER ITEM NO PART NO DESCRIPTION PRICE
1 6520038 CORD ASS'Y 1.5 X 2 X 2.5 FOR GBR (110V) 11.98 6520571 CORD ASS'Y 1 X 2 X 2.5 FOR GBR (240V) 13.98 6520025 CORD ASS'Y 1 X 2 X 2.2 EXCEPT ABOVE 13.79 2 6560044 CORD HOLDER 10 0.69 3 6560057 CORD
More information12A-979U190 LC-210SS (2001) Page 1 of 9 Cable Controls
12A-979U190 LC-210SS (2001) Page 1 of 9 Cable Controls 12A-979U190 LC-210SS (2001) Page 2 of 9 Cable Controls 1 746-0939 1 S 6 Spd. Cable 2 656-0613 1 S Pulley Ass'y Multi-Spd. 3 710-0167 1 /P Scr. 1/4-20
More information060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
More informationSINGLE BARREL 1/2 9/16 3/4 7/ /2 1/2 5/8 11/ /8 1 1 /4 1 9 / /4 SINGLE BARREL NEMA TANG DRILLING CTN /8 1 3 /16 CTN 71055
PAGE MECHANICAL LUGS ALUMINUM SAL SERIES AL OR CU DIMENSIONS (IN) MAX. MIN. L W H BOLT B SINGLE BARREL 00 00 00 0 00 00 00 00 00 00 000 *A- *A- *A-/0 A-/0 A-0 A-00 A-0 A-00 A-00 A-00 A-000 # STR /0 STR
More informationFeed Screeners. Model 90 Screener: Model 108 Screener: Model 125 Screener: Manufactured until 3/2002
Back Home FLEX-AUGER Repair Parts Model 90 Screener: 25895 Model 108 Screener: 34347 Model 125 Screener: 25712 Manufactured until 3/2002 25895 34347 25712 25895 34347 25712 Model 90 Model 108 Model 125
More informationSOLARMOUNT PART & ASSEMBLY BONDING CLAMPS 9/27/2017
SM-A01 PRO SERIES END CLAMP PRO SERIES MID CLAMP 1 7 16" 11 16 " 11 16 " 1 1 2" 1" 30mm to 51mm MODULE FRAME 302035M 302030M 302030D ENDCLAMP PRO MIDCLAMP PRO - MILL MIDCLAMP PRO - DRK MID CLAMP END CLAMP
More informationDynoWare EX+ Upgrade Installation Guide for Motorcycle Dynamometers.
1993-2002 Dynojet Research, Inc. All Rights Reserved. for Motorcycle Dynamometers. This manual is copyrighted by Dynojet Research, Inc., hereafter referred to as Dynojet, and all rights are reserved. This
More informationAC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY. INSTALLATION INSTRUCTIONS Document Number:
Minarik Variable Speed AC Motor Drives AC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY INSTALLATION INSTRUCTIONS Document Number: 250-0297 These instructions apply to models rated: 7.5 25
More informationMultiConnect Adapters
MultiConnect Adapters Serial-to-Serial Adapter Serial-to-Ethernet Adapter Quick Start Guide 2 Multi-Tech Systems, Inc. Quick Start Guide Introduction This guide shows you how to setup your MultiConnect
More information13AN77KG011 Pony (2009) Page 1 of 21 Engine Accessories
13AN77KG011 Pony (2009) Page 1 of 21 Engine Accessories 13AN77KG011 Pony (2009) Page 2 of 21 Engine Accessories 1 683-04549-0637 1 /P Muffler Shield Assembly with Weld 2 710-0227 1 /P Screw, 8-18 x.500
More informationMetal Backshell. Materials and Finishes Material: Brass Finish: 50 in. Gold over Copper
Subminiature Space/High Reliability Metal ackshell Metal ackshells provide strain relief. Various profiles available for different cable routing requirements. Product eatures Qualified to MIL-Spec M85049
More informationSCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL
SCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL Page INTRODUCTION Thank you for purchasing the Schneider Optics DiStar+HD projector lens. With the Schneider DiStar focus mount,
More informationSeries 062 Bus Bar Connectors
Series 062 Bus Bar Connectors Application Specification 114-2130 22 DEC 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
More informationEPX2155. Piston Pump. Owner s Manual. Model Numbers: Stand Upright Cart Low Boy Cart
EPX Piston Pump Owner s Manual Model Numbers: 000 Stand 00 Upright Cart 00 Low Boy Cart SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com
More informationDOOR, GRILLE, TRIM PARTS LIST
Part Lists & Exploded Views Built-In (BI) Series BI-S DOOR, GRILLE, TRIM PARTS LIST 00 Door, Ref -S S Svce 0080 Door, Ref -F/O S Svce NOTE: Door Assemblies do NOT incl. hinges / handles. 00 Bracket, Grille
More informationSno-Thro. Parts Manual. Models (SS522EC) (SS722EC) (SS522) (SS522EC) (SS722C) /06 Printed in USA
Sno-Thro Parts Manual Models 801 (SSEC) 8018 (SSEC) 801 (SS) 8 (SSEC) 80 (SSC) 0000 /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit.
More informationCCP CABINET PRODUCT RANGE
6300189 CCP Cabinets This document shortly describes all variants of the CCP Cabinet concept. It contains information about visual appearance, main dimensions and major features of each cabinet. The descriptions
More informationHusqvarna X4000. Illustrated Parts List Jun 2009
Husqvarna Illustrated Parts List -0 0 Jun 00 MAINFRAME 00 000 MAINFRAME ASSEMBLY, 000 COVER, BELT GUARD 00 WHEEL COVER 000 ROLLCAGE, RIGHT 000 ROLLCAGE, LEFT 00 BLOCK, SPRING 00 BRACKET, ACTUATOR MOUNT
More informationAssembly Manual for Mobile X-ray
Suitable for Kodak 2000, Kodak 2100, Kodak 2200 and Trophy Elytis - 12 th January 2011 William Green Page 1 of 8 Printed 12/01/2011, 2:07:42 PM Mobile X-ray Parts List 1. 6 x M10 x 65mm UNB CAP Bolts 2.
More informationTB146EC 21AK146G966 Page 1 of 7 Engine Assembly version 1
TB146EC 21AK146G966 Page 1 of 7 Engine Assembly version 1 TB146EC 21AK146G966 Page 2 of 7 Engine Assembly version 1 1 753-06237 1 Engine Cover Assembly (Incl. Ref No. 2 & 3) 2 710-04194 1 /P Cover Screw
More informationHANDLEBAR AND CONTROLS
HANDLEBAR AND CONTROLS Model 80 R, 80 RS, 80 RSE, 80 RSW, 80 BBC, 00 C 80 BBC 80 R, 80 RS, 80 RSE, 80 RSW, 00 C 8 8 0 0 8 0 8 0 0 8 PM00 0 00 00 0 Engine Bail Weldment(80 R, 80 RS, 80 RSE, 80 RSW, 00 C)
More informationTRANSMISSOR DE PRESSÃO PIEZO RESISTIVO INTELIGENTE MICRO PROGRAMÁVEL SÉRIE PAS
TRANSMISSOR DE PRESSÃO PIEZO RESISTIVO INTELIGENTE MICRO PROGRAMÁVEL SÉRIE PAS Flexibility Data configuration with HART configurator Measuring of gauge and absolute pressure Reliability Continuous self-diagnostic
More informationISLAMORADA CARTON 1 CARTON 2 CARTON 3. Description Part No x 52 GRAY SAWGRASS WALL
CARTON 1 ISLAMORADA Part # 420832-11 ROUND PACKING LIST Description Part No. 8 21 24 27 30 33 8 x 52 GRAY SAWGRASS WALL 1449 1 - - - - - - - - x 52 GRAY SAWGRASS WALL 1450-1 - - - - - - - x 52 GRAY SAWGRASS
More information3-6. General 1-2-Opto-electronics 3-Interlock. Switches. Operator. Interface. Logic Power. Safety Switches Interlock Switches Overview.
Safety Interlock Overview 1-2-Opto-electronics 3-Interlock Versatility Many safety switches allow the head of the switch to rotate, offering different options on how the switch can be operated and mounted
More informationF60 MT Triple Stage Mast
P ARTS MANUAL This manual contains standard production Product Identification Numbers. Special Engineered Options not included. F60 MT Triple Stage Mast FOR PARTS AND SERVICE: TELEPHONE: (888) 946-3330
More informationCLIMB2 DUAL MONITOR SIT/STAND WORKSTATION
CLIMB2 DUAL MONITOR SIT/STAND WORKSTATION CLIMB2 Rev A 3/17 Model CLIMB2-SLV ASSEMBLY AND ADJUSTMENT CLIMB2 PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment
More informationCATALOG OF REPLACEMENT PARTS MODEL FP400 FOOD PROCESSOR. A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO
CATALOG OF REPLACEMENT PARTS MODEL FP400 FOOD PROCESSOR FP400 ML-104751 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43012 (June 2001) 1 2 3 56 55 54 53 52 50 51 48 49
More informationSupported Vehicle Installations
ParaDyme Vehicle Auto Steer System Installation Manual Supported Vehicle Installations This document supports the installation of ParaDyme on the following systems. Claas 670, 730, 740, 750, 760, 770 Part
More informationManufactured in the USA. Cushioning & Clamping Products
Manufactured in the US ushioning & lamping Products U-olt Series U.S. PTNT NO. 4,934,635 4,997,148 5,014,9 esigned for the tough jobs, the U-olt Series secures pipe runs to any flat surface. Provides total
More informationWater Module Products Ordering Guide
Water Products Ordering Guide Revision Z24, May 2018 Contents 100W/100W+ Datalogging Water ERT... 3 100W Integral Connector Encoder... 3 100W+ Integral Connector Encoder... 3 100WP/100WP+ Datalogging Water
More informationTURNBUCKLES MM INCHES MM INCHES MM INCHES INCHES INCHES
HARDWARE: MEASUREMENTS CLOSED OPEN TURNBUCKLES MM INCHES MM INCHES MM INCHES INCHES INCHES 207020 STEEL 11MM 0.43 196MM 7.72 8MM 0.31 7.72 11.50 207021 STEEL TYPE 316 10MM (3/8 ) 12MM 0.47 238MM 9.37 10MM
More information7409 K570. Generic Pinpad Mount. Kit Instructions. Issue B
7409 K570 Generic Pinpad Mount Kit Instructions Issue B Revision Record Issue Date Remarks A Jun 2009 First issue B Mar 2011 Added 7409 K060 support 1 Introduction This kit provides an arm that is used
More informationTWISTLOCKS - FLATBED TYPE RETRACTABLE
3 1/4" 825 MM MODEL 1101-1132 Ø4 3/4" 1205 MM 13/16" 20 MM 1110-4507 SPLIT ROLL 1109-1132-3 1101-1132-6 POSITIONER SHOWN IN POSITION FOR LEFT LOCKING 1109-1132-1 5 1/16" 128 MM 7 1/8" 181 MM 1105-1132-2
More informationInstallation Guide. Retrofit Kit for USB Ready Intraoral Systems
Installation Guide Retrofit Kit for USB Ready Intraoral Systems Table of Contents Wall-Mount Retrofit Kit... 2 Introduction... 2 Connecting the Articulating and Horizontal Arm Cables... 2 Installing the
More informationENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
More informationJuly Manual 10-slide disk outdoor viewer
Ing. J. de Wijs. Populierstraat 44, 4131 AR Vianen, the Netherlands Tel/Fax. +31 (0)347-372242 e-mail: info@dewijs-3d.com Website: www.dewijs-3d.com Design and production of stereoscopic instruments. July
More informationFloor Standing Pedestal
2336 K052 Floor Standing Pedestal Kit Instructions Issue C Revision Record Issue Date Remarks A Feb 20021 First issue B June 2007 Added pedestal floor bolting procedure C Mar 2011 Added Universal Mounting
More informationPush Button Switches. 186 Switches. Miniature, round and rectangular push button switches available
Push utton Switches ulgin s broad line of pushbutton switches are available in various sizes and configurations. This includes a variety of illumination and terminal options as well as several with high
More informationTable of Contents Interface Module Systems
UHNN Terminal locks Note: ll part numbers are RoHS ompliant. Table of ontents Interface Module Systems Overview (atalog Numbering ode) 196 Interface Modules 197-204 DIN 41612 onnector 198 Telco onnector
More informationPCB Hardware. Contents. SMT Test Points SMT Cable Clips SMT Jumper Links PCB Jumper Links PCB Terminals, Turret Lugs Spacers / Pillars / Standoffs
PC Hardware Contents SMT Test Points SMT Cable Clips SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with standard probes,
More informationWheelchair, foldable heavy duty
SPARE PARTS MANUAL WHEELCHAIRS Sideguard 2 5 6 7 4 8 9 0 0 95024 Sideguard, heavy duty, right pc. 02 9502 Sideguard, heavy duty, left pc. 0 42002 Sideskirt black, right pc. 04 4200 Sideskirt black, left
More informationFLOE WIRELESS REMOTE ASSEMBLY INSTRUCTIONS KIT P/N
FLOE WIRELESS REMOTE ASSEMBLY INSTRUCTIONS KIT P/N 5-0083-00 TOOLS REQUIRED - 3/4" SOCKET - 3/4" WRENCH - /3" WRENCH - PHILLIPS SCREW DRIVER - TORQUE WRENCH INSTRUCTION P/N 6-0083-00 ISSUED: 3//7 SHEET
More informationPARTS CATALOG 0CR10-M85900EN
PARTS CATALOG 0CR10-M85900EN Last update Jul., 2013 Contents Fig. No. Fig. Name Fig. No. Fig. Name SD60 1. DRIVE(SD60) 2. UPPER HOUSING 3. INPUT SHAFT 4. SHIFT LEVER 5. SUPPORT(REMOTE CONTROL) 6. LOWER
More information93T Classic Treadmill - 4HP AC - Heart Rate 93T
93T Classic Treadmill - 4HP AC - Heart Rate 93T-0100-09 Parts Manual 1/5/2019 8:05:39 AM Table of Contents Belt, Deck and Rear Rollers...3 Block Diagram 1...4 Block Diagram 2...5 Block Diagram 3...6 Console
More informationFormulate Designer Series 20 Backwall - Kit 11
Formulate Designer Series 20 Backwall - Kit 11 FMLT-DS-20-11 Formulate Designer Series 20ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
More information1 AM-167/202/242/282/322 Parts Manual. Table Of Contents
AM-167/202/242/282/322 Parts Manual Table Of Contents Mower Beam with Bearings...2 Mower Beam with Bearings...4 Cutting Discs...6 Main Gearbox...8 V-Belt Pulley...10 Headstock...12 Carrier Beam...14 V-Belt
More informationEVOLVE1-M MONITOR ARM
EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before
More informationMechanical accessories
Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529
More informationMIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
More informationClamps with RUBBER BUSHING
Clamps with RUBBER BUSHING Order Codes and dimensions Standard series DIN 3015, Part 1 p 34 Order Codes and dimensions Heavy series DIN 3015, Part 2 p 35-36 clamps with rubber bushing Mounting example
More informationROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.
ROUND BEND U-BOLTS Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2)
More information31AE9P6J590 SB-945 (2005-2) Page 1 of 16 Auger Assembly
31AE9P6J590 SB-945 (2005-2) Page 1 of 16 Auger Assembly 31AE9P6J590 SB-945 (2005-2) Page 2 of 16 Auger Assembly 1 712-0717 1 Nut Insert 3/8-16 UNC 2 712-04063 1 /P Hex Flg. L-Nut 5/16-18 Gr. F Nylon 3
More informationASSEMBLY INSTRUCTIONS. 8 Element 10/11 Meter Maximum Beam M108C
ASSEMBLY INSTRUCTIONS 8 Element 10/11 Meter Maximum Beam M108C www.macoantennas.net (815) 244-3500 Maco Antennas a Division of Charles Electronics, LLC 302 S. East St. Mount Carroll, IL 61053 Copyright
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
More informationWCK Cleaning Pigs. Features
Sizes: 6- through 14-inch Bulletin No: 3000.002.03 Date: May 2010 Cross Indexing No: n/a Supersedes: 3000.002.02 (1/07) Options WCK3 Cleaning Pig WCK-12 and WCK-3 Pigs are available in sizes 6" (0 mm)
More information17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 1 of 22 Deck Lift & Controls
17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 1 of 22 Deck Lift & Controls 17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 2 of 22 Deck Lift & Controls Ref # Part Number Qty S/P/F Description 1 603-04160B 1
More informationRACKS AND CABLE MANAGEMENT
F/ F/ Assemblies, 11.0 W W W. S I E M O N. C O M SECTION CONTENTS RS3 Rack System........ 11.2 11.3 RS3 Series Horizontal Managers........... 11.3 F/ RS Rack System............................. 11.4 Extended
More informationMBX INSTRUCTION MANUAL. Please read this manual carefully before using the MBX! Mid-range studio stand
MBX Mid-range studio stand INSTRUCTION MANUAL EN Please read this manual carefully before using the MBX! CAMBO Thank you for purchasing a Cambo product. This new classed Mid-range studio stand will suit
More information31AE660G022 Snow Thrower 1028 (2002) Page 1 of 13 Belt Drive & Engine Accessories
31AE660G022 Snow Thrower 1028 (2002) Page 1 of 13 Belt Drive & Engine Accessories 31AE660G022 Snow Thrower 1028 (2002) Page 2 of 13 Belt Drive & Engine Accessories 1 710-1652 1 /P Hex Washer Screw 1/4-20
More informationArlington Industries, Inc.
rlington Industries, Inc. 800/233-4717 FX 570/562-0646 Insulating ushings Press fit. Holds firmly in place while pulling cables. TLOG UP/DI/NED TRDE UNIT STD DIM DIM NUMER MFG #01 8997 SIZE PKG PKG 50
More informationTURN-O-MATIC INSTALLATION GUIDE
TURN-O-MATIC INSTALLATION GUIDE WIRELESS SYSTEM WIRELESS SYSTEM (1) Dispenser (1) Dispenser Mounting Bracket (3) Large Slotted Screw (2) Large Slotted Bolt (2) Nut (1) Display Wall Mount Bracket (1) Wireless
More informationPROXIMITY SENSORS. This document provided by Barr-Thorp Electric Co., Inc
PROXIMITY SENSORS www.turck.us Sensors Selection Guide Die Protector Whisker Probe Quick Mount Page L3 Page L4 Page L5 Cushion Mount Mounting Blocks Mounting Brackets Page L5 Page L6 Page L7 - L11 Mounting
More information31AH9Z74597 (2008) Page 1 of 16 Auger & Auger Housing
31AH9Z74597 (2008) Page 1 of 16 Auger & Auger Housing 31AH9Z74597 (2008) Page 2 of 16 Auger & Auger Housing 1 736-0159 1 S Flat Washer.349 ID x.879 OD x.063 2 714-0104 1 S Int. Cotter Pin 3 754-0222A 1
More informationUltima X5000 Rectangular Duct Mount Kit User Instructions
Ultima X5000 Rectangular Duct Mount Kit User Instructions MSA Kit 10176947 - Ultima X5000 316 Stainless Steel Parts List / Instructions Rectangular Gasket (1) Rectangular Duct Mount Base Plate (1) Base
More informationMK DIAMOND CX-3, WITH 6.5 HP VANGUARD WALK-BEHIND CONCRETE SAW PARTS LIST & EXPLODED VIEWS
www.mkdiamond.com MK DIAMOND CX-, WITH 6.5 HP VANGUARD WALK-BEHIND CONCRETE SAW PARTS LIST & EXPLODED VIEWS Revision 101 02.2017 Manual 169685-PM Caution: Read all safety and operating instructions before
More informationWINSTON WORKSTATION INSTALLATION INSTRUCTIONS. STEP 1 COLUMN...Page 2
WINSTON WORKSTATION INSTALLATION INSTRUCTIONS STEP COLUMN...Page 2 STEP 2 MOUNTS Free Standing Base...Page 3 Clamp Mount...Page 4 Thru Mount...Page 5 6 STEP 3 WORK SURFACE...Page 6 8 STEP 4 CENTER BEAM...Page
More informationT-Nuts St. Industrial Profile Systems Fasteners. Technical Data. Application. Ordering Information. Catalog /US T-Nuts
atalog 1816-3/US St Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications. Standard mounting elements
More informationToucan LT board printer
Toucan LT board printer Setup and Operating instructions Unpack the Toucan LT board printer as you would any Toucan LT. Follow all cautions associated with installing a standard Toucan LT. Change in wash
More informationRYOBI 10 in. MITER SAW MODEL NO. TSS101L REPAIR SHEET
RYOBI in. MITER SAW MODEL NO. TSS1L REPAIR SHEET 2 1 3 4 9 7 8 13 12 6 14 66 1 16 19 18 20 2 26 71 64 70 28 6 64 0 23 22 21 17 24 63 0 68 73 69 72 0 67 62 61 72 9 8 60 2 6 3 7 4 74 2 0 27 28 29 30 31 32
More informationZT 1844XL & ZT 2148XL
ZT XL & ZT XL Parts Manual Models 00 hp - XL 0 hp - XL 0000B /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide
More information