Up to 103 mm Ø. KomTronic. Micro-adjustable drilling head M040. Micro-adjustable drilling head with direct measuring system and digital display
|
|
|
- May Francis
- 5 years ago
- Views:
Transcription
1 Up to 03 mm Ø Micro-adjustable drilling head M040 Micro-adjustable drilling head with direct measuring system and digital display KomTronic
2 Sturdy Accurate Easy to use With the M040 micro-adjustable drilling head, slide adjustment is still recorded directly by means of an electronic measurement system. The measurement result is evaluated by a microprocessor and displayed on an CD display with a resolution of µm. This reduces errors in adjustment and read-off to a minimum. Sturdy design By using new technology we have been able to make the new M040 even sturdier. With its water and dustproof design (IP67), it is not affected by either chips or coolant. Direct measurement = accurate measurement Even with the most highly accurate translation of adjustment sequences, other micro-adjustable drilling heads only show the adjustment value indirectly. Our M040 micro-adjustable head works directly in conjunction with the actual measurement process, making the operation considerably easier for the operator. Easy to use The head has been made even easier to use, switching from absolute to differential dimensions with only two keys and also allowing the differential to be set to zero. Concentricity or balanced position can be easily located again in the Absolute mode without need for a setting device. Extended setting range The adjustment value has been increased to mm in the diameter. Replaceable bridges In conjunction with the new replaceable bridges it is possible to machine bores up to 03 mm. These replaceable bridges are in lightweight metal with hard surface coating and integral balancing. Features large adjustment range from -0.4 to +4.6 mm on dia. easy to use with only keys waterproof and dustproof (IP67 standard) direct measuring system on slide display resolution 0.00 mm in the diameter display in mm or inches can be switched between differential and absolute mode easy to read CD display energy saving function, i.e. M040 automatically switches off after 30 seconds central coolant supply up to bar 3 spindle connection 6 mm cylindrical shank can be adapted for any machine tool with standard tool adaptors maximum spindle speed:,0 min - (in central slide position) head diameter: 70 mm weight:, kg Construction can be adapted for any machine tool with standard tool adaptors operating keys battery compartment digital display with position display energy saving function: Display automatically switches off after 30 seconds 3 on tool side or 6 mm cylindrical shank connection Adjustment is carried out manually with an hexagonal key; this allows the slide to be adjusted extremely accurately. One turn of the key equals to a diameter change of 70 µm. EP and other patents ( ) EP and other patents (M04)
3 with connection d 3 Display panel shown at angle Battery Battery spring O-ring Positioning pin Battery cover d d d M ,, N M Note: The micro-adjustable drilling head is balanced in the zero position.. Supply includes micro-adjustable drilling head: Micro-adjustable drilling head with battery. Please order intermediate adaptors and replaceable bridges as extras. Intermediate adaptor with connection for Ø mm for Ø 6 03 mm 3 3 d Clamping screw d Clamping screw M , 0,3 M M ,86 M Supply includes: Intermediate adaptor: Intermediate adaptor with clamping screw for replaceable bridge Note: The application details shown depend on the environmental and application conditions (e.g. machine, ambient temperature, use of lubricant/coolant and the machining result required). These are subject to correct operating conditions, correct application and compliance with the spindle speed limits given for the tools. EP and other patents ( ) EP and other patents (M04) 3
4 Replaceable bridge Ø mm * N max H D min D max * For '' dimension see insert holder table on following page Holder ocation screw Clamping screw for insert holder for holder D min -D max M M H 7, 7, N max 0,06 0,08 M N Replaceable bridge Ø 6-03 mm * N max H D min D max * For '' dimension see insert holder table on following page Holder ocation screw Clamping screw for insert holder for holder D min -D max M03 0 M H 4 4 N max ,0 0,4 M N Supply includes replaceable bridge: Replaceable bridge with location screw, holder and clamping screw. Insert holder - please order as extra 4
5 Insert holder Ø 38,0 03,0 mm (ISO point) 30 4 D Insert holder forwards Micro-adjustable drilling head M04 00 () D Insert holder forwards M M03 0 M03 0 M03 30 M M03 30 M03 30 M , 0, 03, 6 09, 0,, , ,9 8 8,9 0,00 0,00 0,00 0,00 Insert W TOHX 06T... W TOHG 06T... W TOHG 06T... W TOHX W TOHG W TOHG W TOHX 06T... W TOHX Clamping screw Screwdriver N Tx S/Mx4,8 Tx 6 N TxS/M,6x, Tx 8 Insert holder for machining aluminium Ø 38,0 03,0 mm Insert tilt of + over cutting edge (ISO point) Insert holder forwards D Micro-adjustable drilling head M04 00 () D Insert holder forwards M M ,00 Insert W TPGX FN- W TPGX FN- W TPHB W TPHB Clamping screw N Tx S/Mx4,8 Screwdriver Tx 6 N TxS/M,6x, Tx 8 Supply includes insert holder: Insert holder with clamping screw and screwdriver. Insert not included. Further inserts and approach angles available on request.
6 Set in case A Ø 8 mm - Ø 44 mm Set in case complete M Micro-adjustable drilling head M040 M04 00 Boring bar 3 Ø 7,9 -,9 B00 60 Boring bar 3 Ø,9-6,9 Boring bar 3 Ø,9-0,9 Boring bar 3 Ø 9,9-4,9 Boring bar 3 Ø 3,9-8,9 Boring bar 3 Ø 7,9-44,0 B B00 6 B00 67 B00 69 B Inserts W Inserts W optional Adaptor DIN6987 ISO40AD/B- Adaptor DIN6987 ISOAD/B- Adaptor HSK-A63 A A 3 A06 30 Control key SW B Ø 38 mm - Ø 03 mm Set in case complete M Micro-adjustable drilling head M040 Adaptor 3 Ø38-63 mm M04 00 M Adaptor 3 Ø6-03 mm Replaceable bridge Ø38 - mm Replaceable bridge Ø - 63 mm Replaceable bridge Ø6-83 mm M M M M03 0 Replaceable bridge Ø8-03 mm M M M Inserts W Inserts W optional Adaptor DIN6987 ISO40AD/B- Adaptor DIN6987 ISOAD/B- Adaptor HSK-A63 A A 3 A06 30 Control key SW
7 The possible combinations can be supplied in various additional options Supply includes the case with foam lining and inserts for each Please ask our representative. B Basic set for machining Ø mm Set in case M04 04 optional Micro-adjustable drilling head M040 Adaptor 3 Ø38-63 mm Replaceable bridge Ø38 - mm Replaceable bridge Ø - 63 mm Adaptor DIN6987 ISO40AD/B- Adaptor DIN6987 ISOAD/B- Adaptor HSK-A63 M04 00 M M M M A A 3 A06 30 B Basic set for machining Ø 6-03 mm Set in case M04 04 optional Micro-adjustable drilling head M040 Adaptor 3 Ø6-03 mm Replaceable bridge Ø6-83 mm Replaceable bridge Ø8-03 mm Adaptor DIN6987 ISO40AD/B- Adaptor DIN6987 ISOAD/B- Adaptor HSK-A63 M04 00 M M03 0 M M A A 3 A06 30 B3 Extension set for machining Ø mm Set in case M Adaptor 3 Ø38-63 mm Replaceable bridge Ø38 - mm Replaceable bridge Ø - 63 mm M M M M B4 Extension set for machining Ø 6-03 mm Set in case M Adaptor 3 Ø6-03 mm Replaceable bridge Ø6-83 mm Replaceable bridge Ø8-03 mm M M03 0 M M B Extension set for machining Ø mm Set in case M04 04 Adaptor 3 Ø38-63 mm Adaptor 3 Ø6-03 mm Replaceable bridge Ø38 - mm Replaceable bridge Ø - 63 mm Replaceable bridge Ø6-83 mm Replaceable bridge Ø8-03 mm M M M M M03 0 M M M
8 KOMET GROUP GmbH Zeppelinstraße 3 D-7434 Besigheim Tel.+49(0) Fax +49(0) info@kometgroup.com Germany Brazil Mexico KOMET Precision Tools GmbH & Co. KG Zeppelinstraße 3 D-7434 Besigheim Tel.+49(0) Fax+49(0) info@komet.de KOMET Metal Cutting Saws GmbH & Co. KG Postfach 07 D-79 Weil am Rhein Tel.+49(0) Fax+49(0) saegen@komet.de KOMET GROUP GmbH Grossmattstraße 4 D-7968 Rheinfelden Tel.+49(0) Fax+49(0) info@kometgroup.com JE Precision Tools GmbH + Co. KG Ruppmannstraße 3 D-706 Stuttgart / Vaihingen Tel.+49(0) Fax+49(0) info@jel.de KOMET do Brasil, tda. Rua Alexandre de Gusmao, 399 São Paulo - SP, BRASI Tel Fax komet@kometdobrasil.com.br France KOMET S.A.R.. 3, Rue a Fayette B.P. 67 F-6704 Strasbourg-Cedex Tel / Fax / komet@komet-france.com Great Britain KOMET (UK) td. Unit 4 Triton Park Brownsover Road Swift Valley / Rugby CV SG Tel Fax sales@komet.co.uk KOMET de Mexico S. de R.. de C.V Acceso A, No. 0 Parque Industrial Jurica, 760,Queretaro,Qro.Mexico Tel Fax KometdeMexico@komet.com Austria KOMET Werkzeuge Ges.m.b.H. Wagramer Straße 73 A-0 Wien Tel Fax info@komet.at Poland KOMET-URPO Sp.z.o.o. ul. Stoczniowców P Kędzierzyn-Koźle Tel Fax urpol@urpol.com.pl India Switzerland KOMET Precision Tools India Pvt. td. /B, Bommasandra Industrial Area BANGAORE INDIA Tel Fax info@kometindia.com DIHART AG Precision Tools Industriestrasse CH-467 Dulliken Tel Fax info@dihart.ch Italy USA T-/04 Printed in Germany 004 KOMET Precision Tools GmbH & Co. KG We reserve the right to make modifications. KOMET Utensili S.R.. Via Menotti Serrati 74 I-0098 S. Giuliano Mil. Tel Fax kometita@tin.it KOMET of America, Inc. 0 Mitchell Blvd. Schaumburg I USA Tel / / Fax / customerservice@komet.com
Product information PI 54 en Machining unit xxx Slide unit xxx
Product information PI 54 en Machining unit 0.5.030.xxx Slide unit 0.2.200.xxx 2016-03-01 Table of Contents Table of Contents Machining Unit Brief Description...4 Technical Data...6 Dimensions...7 Precision...8
Electro-Mechanical Counters
Electro-Mechanical Counters measuring monitoring analysing Input: pulse counter Display: 5, 6, 7 and 8 digits plastic Panel mounted : 4.5 V DC ; V DC ; 4 V DC ; 5 V AC ; 0 V AC KOBOLD offices exist in
Han R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.
Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet 0039-4 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact
KomTronic. Feed-out tools. for machining centres
KomTronic Feed-out tools for machining centres U-Axis system for economic turning contours on the machining centre when working with a stationary workpiece KOMET KomTronic U-Axis system Replaces separate
Modular Boring Systems
A modular toolholder system for boring, milling, drilling and tapping. 29 Modular Boring Systems A rigid high precision system conceived and manufactured with the most advanced design and production facilities,
MarCator. Dial and Digital Indicators
MarCator. Digital and Dial Indicators MarCator. Dial and Digital Indicators Digital Indicators Overview 5-2 MarCator 175 R Standard versions with digital display 5-4 MarCator 186 R / 186 WR With tolerance
powrgrip Switzerland Made in Swiss Precision Tools
powrgrip Made in Switzerland Swiss Precision Tools PG Safe, Precise, Cost-effective The REGO-FIX powrgrip is an extremely precise, safe, and cost-effective Press-Fit system, perfect for your high-speed,
For MEGA MICRO CHUCK Available in 0.1mm diameter increments to suit all the cutting tool shank sizes with maximum accuracy. Despite their compact size
MICRO COLLET NEW BABY COLLET NBC ENDMILL COLLET COLLET EJECTOR MEGA E COLLET STRAIGHT COLLET for MILLING CHUCK PERFECT SEAL (MPS / BPS / EPS) PULL STUD BOLT POINT MASTER PRO PMP POINT MASTER PMC POINT
Digital Indicators 1075 / 1080 / Features. Technical Data IP MarCator. Digital Indicators
- 5-38 Digital Indicators 175 / 18 / 181 IP51 Features Functions: ON/OFF (Set display to zero) mm/inch Reversal of counting direction PRESET (for entering a numerical value) DATA (data transmission with
Installer Connectors Overview Suitable for lighting, power, HVAC & other applications
Installer Connectors Overview Suitable for lighting, power, HVAC & other applications 221 Series Compact Lever Connectors 221 Series - 4mm² 0.2-4mm 2 solid & stranded 0.14-4mm 2 fine-stranded 450 V/4 kv/2
SHRINK FIT TOOLHOLDER TECHNOLOGY CV40 SHRINK FIT HOLDERS - INCH & METRIC 36 CV50 SHRINK FIT HOLDERS - INCH & METRIC 37-38
SHRINK FIT TOOLHOLDER TECHNOLOGY 34-35 CV4 SHRINK FIT HOLDERS - INCH & METRIC 36 CV5 SHRINK FIT HOLDERS - INCH & METRIC 37-38 BT4 SHRINK FIT HOLDERS - INCH & METRIC 39 HSK63A SHRINK FIT HOLDERS - INCH
Cordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX
Cordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX ref.no.: 91A040 EAN: 4032689193274 Transport and storage box MAFELL-MAX Technical data Collar diameter 43 mm Chuck capacity 13 mm Max. drilling
Format 16 HS Format 16 HS 3D
Stirrup bending machine Format 16 HS Format 16 HS 3D Stirrup bending machine Stirrup bending machine the history of innovation www.mepgroup.com Format 16 HS Format 16 HS 3D A NEW GENERATION The FORMAT
Format 12 HS. Stirrup bending machine. the history of innovation. Stirrup bending machine.
Stirrup bending machine Format 12 HS Stirrup bending machine the history of innovation www.mepgroup.com Format 12 HS A NEW GENERATION The FORMAT 12 HS is the ideal solution in the field of automatic coil
A U T O C O L L I M A T O R S
Printed in Germany 229 900 E 04/07 E l e c t r o n i c α A U T O C O L L I M A T O R S Measure With Precision MÖLLER-WEDEL OPTICAL GmbH Rosengarten 10 D-22880 Wedel Tel : +49-41 03-9 37 76 10 Fax: +49-41
STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
INTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
Dial Gauge KM 4/5 T. of our Precision Dial Gauge series offer reliability, The well thought-out design, accurate components and robust construction
Dial Gauge M 2 T Dial Gauge M 2/30 T Range 30 mm Accuracy according to Käfer works standard Dial Gauge KM 4/5 T Range 5 mm Bezel-Ø 40 mm Precision Dial Gauges The well thought-out design, accurate components
MASTER CATALOG KCPM45.
MASTER CATALOG KCPM45 KSEM Modular Drills KCPM45 Your New Grade for Tough Jobs in Low-Carbon Steel KCPM45 combines a very tough, fine-grain carbide substrate with an advanced multilayer TiAlN coating.
4-component Dynamometer (RCD)
Force 4-component Dynamometer (RCD) Type 9171A... Rotating for measuring cutting forces in heavy machining The rotating 4-component dynamometer (RCD) Type 9171A... permits the measurement of the forces
CAPTO. Switzerland. Made in. Swiss Precision Tools
CAPTO Made in Switzerland Swiss Precision Tools REGO-FIX CAPTO Toolholders As a Certified Sandvik CAPTO manufacturer, REGO-FIX uses new state of the art measuring and grinding systems to create the most
S_Cal PRO. Professionnal Caliper DESCRIPTION
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
Cable distribution systems
Cable distribution systems Top-quality cable distribution systems Passive distribution systems are an important part of any machine installation, as they replace costly connection cabinets and error-prone
نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
mm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
Features Benefits. Collets. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and size (reduced collet selection errors).
Swiss Precision Tools ER Features Benefits Swiss Quality Made in Switzerland to ISO 9001/ISO 14001. 1 1 Marking Type and size (reduced collet selection errors). Traceability Lot number marking on all products
For Gear, Spline & Rack Manufacturing
For Gear, Spline & Rack Manufacturing INC Advanced Technologies for Gear, Spline and Rack Manufacturing Standard s for Spline Applications Gear Milling System Advantages Super Fast Machining At least 50%
Fixings for Mobile Radio Base Stations
Fixings for Mobile Radio Base Stations Clamps Cleats Accessories Fixings for Mobile Radio Base Stations The Telegärtner Group is now pleased to include cable clamps and cleats to extend its portfolio of
METAL STRIP CHIP RESISTOR UlTRA LOW VALUE RM1206~RM2512
METAL STRIP CHIP RESISTOR UlTRA LOW VALUE RM1206~ Metal Strip Chip Resistor Ultra Low Value Features Ultra low resistance range from 0.5 to 20 m ohm High power rating up to 3 watt Low T.C.R down to ±50ppm/
Servo-conventional milling machine
Universal Milling Machine Servo-conventional milling machine Control developed and built in Germany Positioning control for traveling pre-selected paths on all axes Constant cutting speed, whereby the
YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE.
- and Touch Probes YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE. Since 1936 Mahr is one of the leading global producers of test indicators, we have achieved this with the continuous
ALIMASTER ENDMILL SERIES
ENMILL SERIES B0E HIGH EFFICIENCY MACHINING OF ALUMINIUM ALLOYS AMSR AMSRRB AMMR NEW! AMSR AMMR AMSRRB Roughing End Mills for Aluminium Short cut length, flutes, Relieved neck Medium cut length, flutes
Syntax 12 HS Syntax 16 HS
Stirrup bender and automatic shaping from coil Syntax 12 HS Syntax 16 HS Stirrup bender and automatic shaping from coil the history of innovation www.mepgroup.com Syntax 12 HS Syntax 16 HS VERSATILITY
PRECISION MEASURING INSTRUMENTS
PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query
LaserLyte-Flex Red & Green Alignment System
LaserLyte-Flex Red & Green Alignment System LaserLyte-Flex The LaserLyte-Flex is an entry-level laser alignment system. It uses interchangeable optics and a semiconductor laser diode to project a highly
MarTest. Test Indicators
- - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)
MarTest. Test Indicators
- - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm
AC/DC CURRENT TRANSDUCER OPERATOR S MANUAL. RS stock no
AC/DC CURRENT TRANSDUCER OPERATOR S MANUAL RS stock no. 243-0655 ISO-TECH ICA 32N CURRENT ADAPTOR INSTRUCTION MANUAL 1 2 (1) Introduction 1.1 Unpacking and checking When you unpack your new current adaptor,
Mechanical and adapters
Pneumatic expansion shafts Mechanical expansion shafts Expansion couplings Expansion chucks and adapters Friction and knife shafts Shaft handling Expansion chucks and adapters E X P A N S I O N U N I T
DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.
- s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,
Form Measurement ROUNDTEST RA-1600
Form Measurement ROUNDTEST RA-1600 A new PC-compliant Roundness and Cylindricity form measuring instrument with extensive analysis features to enable measurement of a wide variety of workpieces. Powerful
analysette 3 particle size analysis quality control sieving for your lab Vibratory Sieve Shaker Microprocessor controlled
analysette 3 Vibratory Sieve Shaker Microprocessor controlled with optical display of all functions Digital adjustment and regulation of amplitude: AMPCONTROL Up to 9 sieve programmes can be saved and
Dial Gauge M 2 T. Accuracy according to DIN 878 Dimensions according to DIN EN ISO 463
Dial Gauge M 2 T Dial Gauge MU 52 T Strengthened rack-ø 5 mm Accuracy according to DIN 878 Dimensions according to DIN EN ISO 463 Dial Gauge M 2 TK Particularly clear reading due to concentrically positioned
YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
RMI multi-couplings Control
RMI multi-couplings Control Centralised connections for greater implementation speed Centralised connection of control circuits optimised time for changing moulds streamlined connections. Efficient and
Transportation Solutions. Audio Signal Transducer
Transportation Solutions Audio Signal Transducer Let s Talk about it! - Audio Signal Transducer with external Programming Tool Playback of speech and melodies 6 digital inputs Supports wav audio files
Bore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
INSTALLATION INSTRUCTIONS LFH160 Cable
INSTALLATION INSTRUCTIONS LFH160 This guide describes how to connect and use the National Instruments LFH160 cable which has a maximum voltage rating of 100 VDC, CAT I. Use the LFH160 cable to connect
d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity
HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain
SPHINX-5X/30. Five Axis Machining Center SPHINX-5X/30. NAMSUN Machinery Corporation 1. With Hidenhain i TNC 530. Five Axis Machining Center
Five Axis Machining Center With Hidenhain i TNC 530 The external color and design may be modified for improvements NAMSUN Machinery Corporation 1 High Speed, High Precision Spindle Because we adopt high
Surface Mount Terminal Blocks with Push-Buttons
Surface Mount Terminal Blocks with Push-Buttons Surface Mount Terminal Blocks with Push-Buttons Pin Spacing 4 mm, 8 mm 2060 Series Surface mount terminal blocks with CAGE CLAMP S connection and push-buttons
MICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit
Traditional External Micrometer 1961 Series Standard: BS870, DIN 863/1, ISO361 All models feature Tungsten carbide measuring faces 6.5mm spindle diameter Speeder type ratchet Locking lever Choice of standard
Yslo Flex 1 RTS. EN Installation guide (1 panel) Ref A
Yslo Flex 1 RTS EN Installation guide (1 panel) Ref. 5116413A EN Insatallation guide (1panel) page 3 Somfy hereby declares that the product designed to be supplied with 230V/50Hz conforms with the essential
Viscosity-Compensated Flow Meters and Switches
Viscosity-Compensated Meters and Switches for Viscous Liquids measuring monitoring analysing Range: Oil 0.01-0.07 to 8-80 L/min Basic accuracy: ±4% f. s. pmax 350 bar, tmax 100 C Viscosity range: 1...540
NEW. L 4000 System. Safety Photoelectric Switches Complete overview. Product Overview
NEW L 4000 System Product Overview Safety Photoelectric Switches Complete overview Safety Photoelectric Switches Non-contact access protection to hazardous areas with safety photoelectric switches type
BTC. Presetting Units. Member of the LEITZ Group
BTC Presetting Units Member of the LEITZ Group www.bilz.de BTC I STARTER, TABLE VERSION One Handed Control Ergonomic operation concept for easy positioning of the measuring carriage by the tool cutting
Roller Rail Systems. (Additional roller runner blocks SNS R1822, SLS R1823, FXS R1854) R310EN 2315 ( ) The Drive & Control Company
Roller Rail Systems (Additional roller runner blocks SNS R18, SLS R183, FXS R1854) R31EN 315 (1.9) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems
Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves
Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves 2 rue René Laennec 51500 Taissy France Fax: 03 26 85 19 08, Tel : 03 26 82 49 29 E-mail:hvssystem@hvssystem.com
engineered to connect Y-Sol - PhotovoltaicS Products
engineered to connect Y-Sol - PhotovoltaicS Products connector SOLUTIONS introduction What is the meaning of Hermetic Sealed? Hermetic Sealed is a one step overmolding process. In a one step process the
CALIBRATION. Sylvac Dial Gauge Calibrator
Sylvac Dial Gauge Calibrator The Sylvac stand is custom designed for calibrating all types of dial gauges, lever indicators and transducers. It utilises a 25mm / 1" travel Sylvac probe linked to a digital
TOOL MASTER Octa2. Tool presetting The professional and compact solution for your manufacturing
TOOL MASTER Octa2 PWB tool presetters stand for maximum productivity with ultimate user-friendliness. The tooling quality and timely detection of damaged tools boost productivity and reduce the number
Sense it! Connect it! Bus it! Solve it! ENCODERS
Sense it! Connect it! Bus it! Solve it! ENCODERS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
series Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
LaserLyte-Flex Green Userguide
LaserLyte-Flex Green Userguide Product Overview Thank you for purchasing the LaserLyte-Flex Green laser alignment system. It uses interchangeable optics and a green semiconductor laser diode to project
O-Focus DM Photo Set O-Focus DM Cine Set C C
O-Focus DM Photo Set O-Focus DM Cine Set C1242-0001 C1242-0002 e User Guid User Guide ! Caution Ÿ DO NOT hang heavy items over the O-Focus DM handwheel. Ÿ DO NOT attempt to move the camera by pulling on
0,8. R a. Masterfinish - Turning
N6 0,8 R a Masterfinish - Turning CERATIZIT the parent companies Headquarters and main site Mamer / Luxembourg Main site Reutte / Austria Hard material matters it is the core of our business. Through profound
Product Information. POSITIP PT 8016 Digital Readout for Manually Operated Machine Tools
Product Information POSITIP PT 816 Digital Readout for Manually Operated Machine Tools 11/218 POSITIP PT 816, PT 816 Active The convenient digital readout for milling, drilling, and boring machines, and
Built from our customers best ideas.
Built from our customers best ideas. The new WX soldering stations from Weller. A new era in soldering. Two stations to launch in a new soldering era. The WX 1 single-channel soldering station The name
TOOLING SYSTEMS LIMITED
TOOLING SYSTEMS LIMITED MODULAR BORING BAR RANGE ABS COMPATIBLE www.microbore.com MICROBORE TOOLING SYSTEMS LTD Whitacre Road Industrial Estate, Whitacre Road, Nuneaton, Warwickshire CV11 6BX. Tel: 0044
NPort S8000 Series Quick Installation Guide
NPort S8000 Series Quick Installation Guide Edition 6.0, March 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778
Clamping Device, Series 2709
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Clamping Device, Series 2709 Technical data Pneumatic Open mechanism Technical Data Type Power transmission
Air gap sensors SOPA
Product range overview Key features General Lightweight, compact and highly precise, this pneumatic solution offers impressive scope for integration: SOPA features a control module, compressed air regulation,
O-Box WM Set. User Guid C User Guide
O-Box WM Set C1243-0001 e User Guid User Guide ! Caution! WARNING! If the sunshade is damaged or torn, DO NOT touch the damaged surfaces. Dispose of safely. Ÿ DO NOT attempt to move the camera by pulling
7 Collet chucks. 7.3 Cylindrical collet chucks 7.13 Rego-Fix nuts 7.19 Rego-Fix Sealing disks 7.23 Rego-fix equipment 7.35 Quick change tool systems
.3 Cylindrical collet chucks.13 Rego-Fix nuts.19 Rego-Fix Sealing disks.23 Rego-fix equipment.35 Quick change tool systems Notes Tél.: +41 32 436 10 50 Fax: +41 32 436 10 55 info@wibemo.ch www.wibemo.ch
Surface Roughness Testing
Surface Roughness Testing J-1 Summary of Roughness Parameters Commonly Used Arithmetical mean deviation of the profile R a (ISO 4287, DIN 4768) The arithmetical mean deviation of the profile Ra is the
Mini Syntax 12 HS Mini Syntax 16 HS
Stirrup bender and automatic shaping from coil Mini Syntax 12 HS Mini Syntax 16 HS Stirrup bender and automatic shaping from coil the history of innovation www.mepgroup.com Mini Syntax 16 HS VERSATILITY
RMI Temperature control
RMI Temperature control 7 nominal diameters... hot and cold water, glycol water and heat transfer fluid circuits temperature control on injection presses Safe and quick locking A large number of locking
COLLETS. DESCRIPTION DIN 6388 COLLETS Form A For plain straight shank tools QUICK CHANGE TAPPING. ADAPTERS Bilz type. Positive drive adapters
COETS ESCRIPTION Page ESCRIPTION Page IN 88 COETS Form A For plain straight shank tools 5 QUICK CHANGE TAPPING AAPTERS Bilz type Positive drive adapters 2 IN 88 COETS Form E For threaded straight shank
Cable Connector Housings for D-Subminiature connectors, Series TMC. Catalog E /04 Edition 1
Cable Connector Housings for D-Subminiature connectors, Series TMC www.erni.com Catalog E 023975 08/04 Edition 1 www.erni.com Catalog E 023975 08/04 Edition 1 Table Of Contents Housing versions KSG 200,
NEW CAPTIS CLAMPING SYSTEM. The modular and flexible system for internal and external clamping
NEW CAPTIS CLAMPING SYSTEM The modular and flexible system for internal and external clamping CAPTIS CLAMPING SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
GEMÜ 4232 Travel sensor for linear actuators
Travel sensor for linear actuators Features ATEX version available as an option Easy fitting to GEMÜ linear actuators Compact, stable housing Durable Can be retrofitted to GEMÜ valves or third-party actuators
FCC17 Series FILTERED STACKED D-SUB CONNECTORS
FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP
Micrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
DATASHEET. 38.1cm (15 ) POS-LINE MONITOR. DATA DISPLAY GROUP
DATASHEET 38.1cm (15 ) POS-LINE MONITOR DATA DISPLAY GROUP www.datadisplay-group.com Data Display Group POS-Line monitor 15 inch - October 2017 Page 2 Robust industrial monitor with 15 (38.1 cm) display
CLAMP ONCE - MACHINE COMPLETE - ONE MILLION POSSIBILITIES - A CUT ABOVE THE REST - RIGID, PRECISE AND FLEXIBLE M80 M80-G
- ONE MILLION POSSIBILITIES - A CUT ABOVE THE REST - RIGID, PRECISE AND FLEXIBLE M0 M0-G [ DE ] [ EN ] [ FR ] [ IT ] [ ES ] [ RU ] [ CN ] [ JP ] CLAMP ONCE - MACHINE COMPLETE [ 1 ] The new M0 Millturn
HEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision
Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale
Inside Micrometers. Bore Gages
Holtest ABSOLUTE Borematic Holtest ABSOLUTE Borematic Inside Micrometers Inside Micrometers Small Tool Instruments Inside Measurement INDEX Holtest Digimatic Holtest -3 Holtest -7 Holtest (Type II) -11
Encoder WDGA 58E PROFINET-IO (cov)
Encoder WDGA 58E PROFINET-IO (cov) www.wachendorff-automation.com/wdga58epnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
Electronic Stopwatches
measuring monitoring analysing 1/100 min; 1/1 s; 1/100 s Power supply: battery Housing material: ABS ; Summary / Split / Lap; Time of day; Memory; Dual measurement; Countdown; Alarm beeper KOBOLD offices
ERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE
ERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE HISTORY 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the manufacturing of Sulky Hubs. 1973 Parlec begins
MarTest. Test Indicators
. Test Indicators The New Standard... Comprehensive product range with a wide selection of accessories Highly refined and precise mechanism Water-resistant dial face for use in the workshop Excellent quality
DATASHEET cm (21.5 ) POS-LINE MONITOR. DATA DISPLAY GROUP
DATASHEET 54.7 cm (21.5 ) POS-LINE MONITOR DATA DISPLAY GROUP www.datadisplay-group.com Data Display Group POS-Line monitor 21.5 inch - September 2017 Page 2 Robust industrial monitor with 21.5 (54.7 cm)
BIOMEDICAL ACCESSORIES
BIOMEDICAL ACCESSORIES Biomedical equipment EXAMINATION LAMPS LED LED lamp on articulated arm with clamp Light output 15000 Lux / 0.5 m Field of illumination 460 mm Color temperature 4000 K CRI > 85 For
ODU MAC LC. Modular Attachable Connector System
Catalogue No. 1004 LC-a ODU MAC LC Modular Attachable Connector System ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr. 11, 84453 Mühldorf a. Inn, Germany Phone: +49/ 86 31/61 56-0, Fax: +49/ 86 31/61
SN388 New Features. Summer SN388 Software Release 8.4. SQC-Pro Release 1.2. VE432 Release 3.0. CoPilot
SN388 New Features Summer 1999 SN388 Software Release 8.4 SQC-Pro Release 1.2 VE432 Release 3.0 CoPilot SN388 Software Release 8.4 Remote access of the SN388 : CoPilot. Installation procedure of the Solaris
DATASHEET cm (15,6 ) POS-LINE MONITOR. DATA DISPLAY GROUP
DATASHEET 39.6 cm (15,6 ) POS-LINE MONITOR DATA DISPLAY GROUP www.datadisplay-group.com Data Display Group POS-Line monitor 15.6 inch - September 2017 Page 2 Robust industrial monitor with 15.6 (39.6 cm)
TL Laser Systems for Tool Measurement
TL Laser Systems for Tool Measurement Tool monitoring with a TL laser system is a very flexible solution. The contact-free optical measurement enables you to check even the smallest tools rapidly, reliably
DATASHEET cm (17.3 ) POS-LINE MONITOR. DATA DISPLAY GROUP
DATASHEET 43.8 cm (17.3 ) POS-LINE MONITOR DATA DISPLAY GROUP www.datadisplay-group.com Data Display Group POS-Line monitor 17.3 inch - October 2017 Page 2 Robust industrial monitor with 17.3 (43.8 cm)
Connect - Contact - Control. Connectors according to UIC VE EP Series. F 121.en
Connect - Contact - Control Connectors according to UIC 541-5 VE 123 F 121.en 2 Connector to UIC standard 541-5 VE, The connector is designed in accordance with the specifications of the international
Does everything rotate around precision? no problem with Micromar.
Does everything rotate around precision? no problem with Micromar. The latest information on MICROMAR products can be found on our website: www.mahr.com, WebCode 2 Micrometers belong alongside calipers