45 Flare F L A R E. SPECIAL SIZES Other sizes not specified are available upon request.

Transcription

1 45 Flare TTON Flare Fittings are manufactured especially with hazardous liquids and gasses in mind. They are available in sizes ranging from 1/8" to 3/4", and are manufactured from high quality DZR grade brass alloy. All flare fittings conform to the following standards: AS D26, AS3688, AG , NZG 1993/76. F L A R ADVANTAGS May be assembled/disassembled numerous times. When used with the appropriate tubing, they can withstand high pressures. For improved resistance to mechanical vibration, the Long Flare Nut may be used. ALCATONS Use with copper, brass, aluminium, and flareable steel pipe. nstall where medium to high pressures are encountered. Flare Fittings, when used with the Long Flare Nut, provide good resistance to vibration. deal for use with fuel, oil, air, water and Natural Gas lines. n Applications where temperatures extremes are encountered we recommend the use of stress-relieved fittings. lease contact our technical sales department for more information. WORKNG RSSURS TTON Flare Fittings are able to withstand high pressures, use the table below as a guideline. Usually, pressures are determined by the pipe used, rather than the Flare Fitting. SCAL SZS Other sizes not specified are available upon request. ASSMBLY. Slide nut, tapered end first, onto tubing.. Using a 45 flaring tool, flare end of tube until flare just fits inside nut. (On thin wall tubing it is recommended a double flare is used to prevent pinch off.). Assemble to fitting body. Nut should be tightened hand tight. V. Using a wrench, tighten until a leak-proof, metal to metal joint is achieved. To avoid premature failure of the fitting, do not over-tighten. Size Hydraulic ka [S] neumatic ka [S] 1/ [2500] 4800 [700] 3/ [2500] 4800 [700] 1/ [2000] 4800 [700] 5/ [2000] 4800 [700] 3/ [1500] 2750 [400] 1/ [1020] 1750 [250] 5/ [1020] 1750 [250] 3/ [1020] 1750 [250] * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 3

2 F L A R Flare a rt Numbe r Standa rd a ck Flare lug Threa d rice e r ie ce / / / / / C Flare Cap a rt Numbe r Standa rd a ck Threa d rice e r ie ce 40C04 5 1/ C05 5 5/ C06 5 3/ C08 5 1/ S Short Flare Nut a rt Numbe r Standa rd a ck Threa d rice e r ie ce 41S / S / S / S / S / S / S / S / AG 4 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

3 45 Flare Long Flare Nut 41 Offers mproved Resistance To Vibration / / / / / / / / Double Flare Union 42 For Reducing Unions See No / / / / / / / / F L A R Flare Tee 44 For Reducing Unions See No / / / / / / / * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 5

4 F L A R 45 Flare 45 Flare Male Branch Tee a rt Numbe r Standa rd a ck Threa d rice e r ie ce * 10 3/16 1/8 BST * 10 1/4 1/8 BST * 10 1/4 1/4 BST * 10 5/16 1/8 BST * 10 3/8 1/4 BST * 10 1/2 3/8 BST Flare Female Connector a rt Numbe r Standa rd a ck Threa d rice e r ie ce /8 1/8 BS /16 1/8 BS /4 1/8 BS /4 1/4 BS /4 3/8 BS * 10 5/16 1/8 BS /16 1/4 BS * 10 3/8 1/8 BS /8 1/4 BS /8 3/8 BS /8 1/2 BS /2 1/4 BS /2 3/8 BS /2 1/2 BS /4 1/2 BS /4 3/4 BS AG 6 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

5 /8 1/8 BST /16 1/8 BST /16 1/4 BST /4 1/8 BST /4 1/4 BST /4 3/8 BST /4 1/2 BST /16 1/8 BST /16 1/4 BST /16 3/8 BST /16 1/2 BST /8 1/8 BST /8 1/4 BST /8 3/8 BST /8 1/2 BST /8 3/4 BST /2 1/4 BST /2 3/8 BST /2 1/2 BST * - 1/2 3/4 BST /8 3/8 BST /8 1/2 BST /8 3/4 BST /4 1/2 BST /4 3/4 BST /8 1/8 BST /16 1/8 BST /4 1/8 BST /4 1/4 BST /4 3/8 BST /16 1/8 BST /16 1/4 BST /16 3/8 BST Flare F Flare Male Connector 48 Flare Male lbow 49 Continued on next page... * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 7 L A R

6 F L A R 45 Flare...Continued from previous page 49 Flare Male lbow a rt Thre ad /8 1/8 BST /8 1/4 BST /8 3/8 BST /8 1/2 BST /2 1/4 BST /2 3/8 BST /2 1/2 BST /8 1/2 BST /8 1/2 BST Flare Female lbow a rt Thre ad * 1 1/4 1/8 BS /16 1/8 BS /8 1/4 BS /2 3/8 BS Flare Male Run Tee /4 1/8 BST /8 1/4 BST /2 3/8 BST AG 8 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

7 45 Flare Flare 90 lbow / / / / / / / F L A R Reducing Flare Union 58 For Double Flare Unions See No /4 3/ /16 1/ /8 1/ /8 5/ /2 3/ * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 9

8 F L A R GFC 45 Gas Flare a rt Numbe r Gas Flare Assembly Consists of GFN Nut and GFM Connector Standa rd a ck Threa d rice e r ie ce GFC m m 3/8 BST GFC m m 1/2 BST GFC m m 1/2 BST GFC m m 3/4 BST GFF Gas Flare Female Connector a rt Numbe r Standa rd a ck Threa d rice e r ie ce GFF m m 1/2 BST GFF m m 3/4 BST Stress Relieved GFN Gas Flare Nut a rt Numbe r Standa rd a ck Threa d rice e r ie ce GFN m m GFN m m GFN m m Stress Relieved AG 10 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

9 45 nverted Flare F L nverted Flare Nut 105 A * 20 1/ * 20 3/ * 20 1/ * 20 5/ * 20 3/ * 10 1/ R nverted Flare Male Connector * 20 3/16 1/8 BST * 20 1/4 1/8 BST * 20 1/4 1/4 BST * 20 5/16 1/8 BST * 20 5/16 1/4 BST * 10 3/8 1/4 BST * 10 1/2 3/8 BST nverted Flare Male lbow * 10 1/8 1/8 BST * 10 3/16 1/8 BST * 20 1/4 1/8 BST * 20 1/4 1/4 BST * 20 5/16 1/8 BST * 20 5/16 1/4 BST * 10 3/8 1/4 BST * 10 3/8 3/8 BST * 10 1/2 3/8 BST * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 11

10 16 rofiles 1/ /8 " 6mm 3/16 1/ /4 " 8mm 5/16 3/ / /8 " 10mm 5/ /2 " 15mm 3/ /4 " 20mm 1" 4mm 6mm mm " 25mm 10mm 12mm mm AG 12 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

11 Compression Fittings TTON Compression Fittings are designed to comply with established industry standards. This economical fitting is available in a wide range of off-the-shelf sizes and styles. They are manufactured from high quality DZR brass alloy. ADVANTAGS Simple to assemble. No soldering, flaring or deburring is necessary. Suitable for use in a wide variety of applications. C O M ALCATONS May be used with copper, aluminium, brass, and plastic tubing. Use with steel tubing is not recommended. nstallation should be where low to medium pressures are encountered, and modest tube vibration/movement is involved. Suitable for hazardous liquids, oils, and fuel. Not recommended for use with gas WORKNG RSSURS Generally, working pressure is dependant upon the type of tubing used and not the fitting. Consequently the table shown below should be used as a guide only. ASSMBLY. Slide nut then sleeve onto tube ensuring threaded end of nut is facing the sleeve.. f using a plastic tube, push a 261 nsert into tube to prevent tube from collapsing.. nsert the tube into the fitting until the tube has bottomed onto the fitting shoulder. V. Screw nut onto the fitting and tighten "hand tight". Using the table below, follow the number of additional wrench turns. Size Hydraulic ka [S] neumatic ka [S] Wrench Turns 1/ [500] 2000 [290] 1 3/ [500] 1750 [250] 1 1/ [400] 1400 [200] 1 5/ [400] 1400 [200] 1 3/ [290] 1050 [150] 1 1/ [290] 1050 [150] 1½ 5/ [200] 700 [100] 1½ 3/ [200] 700 [100] 1½ * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 13

12 60N Compression Fittings Sleeve For All Materials. deal For Nylon C O M Numbe r Threa d 60N / N / N / N / N / N / N / N / N16 1 1" Sleeve Numbe r deal For Copper Threa d / / / / / / / / Compression Nut Numbe r Threa d / / / / / / / / " AG 14 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

13 Compression Fittings Hose nsert 261 rovides Support For lastic s OD D / mm /4 3.86mm / mm /8 5.84mm /2 9.14mm / mm 2.66 C O M Double Union 62 Supplied Complete With 60N Sleeves and 61 Nuts Thre ad / / / / / / / Reducing Union Supplied Complete With 60N Sleeves and 61 Nuts 62R 62R /4 3/ R /16 1/ R /8 1/ R /8 5/ R0804-1/2 1/ R /2 1/ R1006-5/8 3/ * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 15

14 Compression Fittings C O M 64 Union Tee Supplied Complete With 60N Sleeves and 61 Nuts / / / / / / * 5 5/ * - 3/ Union lbow Supplied Complete With 60N Sleeves and 61 Nuts. Numbe r Threa d / / / / / / / Female Connector Supplied Complete With 60N Sleeves and 61 Nuts. Numbe r Threa d /8 1/8 BS /16 1/8 BS /4 1/8 BS /4 1/4 BS /4 3/8 BS /4 1/2 BS /16 1/8 BS /16 1/4 BS /16 3/8 BS Continued on next page... AG 16 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

15 Compression Fittings...Continued from previous page. Female Connector 66 Thre ad /8 1/8 BS /8 1/4 BS /8 3/8 BS /8 1/2 BS /2 3/8 BS /2 1/2 BS /4 1/2 BS * /4 3/4 BS * Male Connector 68 Supplied Complete With 60N Sleeves and 61 Nuts Thre ad /8 1/8 BST /8 1/4 BST /16 1/8 BST /16 1/4 BST /4 1/8 BST /4 1/4 BST /4 3/8 BST /4 1/2 BST /4 3/4 BST /16 1/8 BST /16 1/4 BST /16 3/8 BST /16 1/2 BST /8 1/8 BST /8 1/4 BST /8 3/8 BST /8 1/2 BST /2 1/4 BST /2 3/8 BST /2 1/2 BST /2 3/4 BST /8 3/8 BST /8 1/2 BST /8 3/4 BST /4 1/4 BST /4 1/2 BST /4 3/4 BST C O M * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 17

16 Compression Fittings 69 Male lbow Supplied Complete With 60N Sleeves and 61 Nuts. C O M /8 1/8 BST /16 1/8 BST /4 1/8 BST /4 1/4 BST /4 3/8 BST /16 1/8 BST /16 1/4 BST /8 1/8 BST /8 1/4 BST /8 3/8 BST /8 1/2 BST /2 1/4 BST /2 3/8 BST /2 1/2 BST /8 3/8 BST /8 1/2 BST /4 1/2 BST Female lbow Supplied Complete With 60N Sleeves and 61 Nuts * 20 1/8 1/8 BS /16 1/8 BS /4 1/8 BS /8 1/4 BS * 10 1/2 3/8 BS AG 18 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

17 Compression Fittings Union Male Run Tee 71 Supplied Complete With 60N Sleeves and 61 Nuts. Thre ad * 10 1/8 1/8 BST * 10 3/16 1/8 BST /4 1/8 BST /4 1/4 BST /16 1/8 BST /16 1/4 BST /8 1/4 BST /2 3/8 BST Union Male Branch Tee 72 Supplied Complete With 60N Sleeves and 61 Nuts C O M Thre ad Thre ad * 20 1/8 1/8 BST * 20 3/16 1/8 BST /4 1/8 BST /4 1/4 BST /16 1/8 BST /16 1/4 BST /8 1/4 BST /8 3/8 BST /2 1/4 BST /2 3/8 BST Male/Female Run Tee 76 Supplied Complete With 60N Sleeves and 61 Nuts /8 1/8 BST /16 1/8 BST /4 1/8 BST /16 1/8 BST /8 1/4 BST * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 19

18 Metric Compression Fittings M60N Metric Sleeve For All Materials. deal For Nylon C O M M61 Numbe r Threa d M60N mm M60N mm M60N mm M60N mm M60N mm M60N mm Metric Compression Nut Numbe r Threa d M mm M mm M mm M mm M mm M mm M261 Metric Hose nsert rovides Support For lastic s. OD D Numbe r M mm 2.40 mm 0.93 M mm 3.90 mm 0.93 M mm 5.30 mm 1.37 M mm 6.80 mm 1.37 M mm 8.60 mm 2.19 AG 20 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

19 Metric Compression Fittings Metric Double Union M62 Supplied Complete With M60N Sleeves and M61 Nuts Thre ad M mm M mm M mm M mm M mm M mm Metric Union Tee Supplied Complete With M60N Sleeves and M61 Nuts Thre ad M mm M mm M mm M mm M mm M mm Metric Union lbow Supplied Complete With M60N Sleeves and M61 Nuts Thre ad M mm M mm M mm M mm M mm M mm Metric Female Connector Supplied Complete With M60N Sleeves and M61 Nuts Thre ad M mm 1/4 BS 6.13 M mm 1/4 BS 7.08 M mm 1/4 BS 7.70 M mm 3/8 BS 9.19 M mm 1/2 BS M64 M65 M66 C O M * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 21

20 Metric Compression Fittings M68 Metric Male Connector Supplied Complete With M60N Sleeves and M61 Nuts. C O M M69 Numbe r Threa d M mm 1/8 BST 3.59 M mm 1/4 BST 4.16 M mm 1/8 BST 3.59 M mm 1/4 BST 4.16 M mm 3/8 BST M mm 1/8 BST 5.31 M mm 1/4 BST 5.45 M mm 3/8 BST M mm 1/2 BST M mm 1/8 BST 5.60 M mm 1/4 BST 8.81 M mm 3/8 BST M mm 1/2 BST M mm 1/4 BST 7.91 M mm 3/8 BST M mm 1/2 BST M mm 3/9 BST M mm 1/2 BST Metric Male lbow Supplied Complete With M60N Sleeves and M61 Nuts. Numbe r Threa d M mm 1/8 BST 8.72 M mm 1/4 BST M mm 1/8 BST 7.74 M mm 1/4 BST M mm 3/8 BST M mm 1/8 BST M mm 1/4 BST M mm 3/8 BST M mm 1/8 BST M mm 1/4 BST M mm 3/8 BST M mm 1/4 BST M mm 3/8 BST M mm 1/2 BST AG 22 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

21 Fittings TTON Fittings are manufactured with female RC, R Series and male R Series threads in accordance with AS1772. These robust fittings are available in a comprehensive range of sizes ranging from 1/8" to 1". They are manufactured from high quality DZR brass alloy. Some fittings are available with NT threads. lease contact Titon for stock availability. ADVANTAGS Very easy to assemble. No special tools or extra parts are necessary. May be assembled/ disassembled numerous times. ALCATONS May be used with copper, steel, or brass pipe. nstall where medium to high pressures are encountered. Fittings provide good resistance to vibration. deal for use in pneumatic and hydraulic control equipment. WORKNG RSSURS TTON Fittings are able to withstand high pressures, use the table below as a guideline. SCAL SZS Other threads/sizes not specified are available upon request. ASSMBLY. Use pipe sealing compound.. Tighten 1½ to 2½ turns past hand tight. Size Hydraulic ka [S] neumatic ka [S] 1/ [2000] 3500 [500] 1/ [2000] 3500 [500] 3/ [2000] 2750 [400] 1/ [1500] 2750 [400] 3/ [1020] 2000 [290] 1" 4000 [580] 1250 [180] * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 23

22 Fittings 3133 Cap Numbe r /8 BS /4 BS /8 BS /2 BS Hex lug Available n Hollow and Solid Configurations. Numbe r /4 BST /8 BST /2 BST /4 BST " BST s Listed Above Are Hollow, s Listed Below Are Solid S 10-1/8 BST S * 10-1/4 BST S * 10-3/8 BST S * 10-1/2 BST S * 10-3/4 BST S * 10-1" BST Male To Female Adaptor Numbe r (Fema le) (Male) /8 BS 1/8 BST /4 BS 1/8 BST /4 BS 1/4 BST /8 BS 1/8 BST /8 BS 1/4 BST /8 BS 3/8 BST /2 BS 1/4 BST /2 BS 3/8 BST /2 BS 1/2 BST /4 BS 1/4 BST /4 BS 3/8 BST /4 BS 1/2 BST " BST 1/2 BST AG 24 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

23 Fittings Flush Mount Reducing Bush 3223 nternal Hex Drive (Female) (Male) /8 BS 1/4 BST /4 BS 3/8 BST /8 BS 1/2 BST 4.86 Reducing Bush 3224 (Female) (Male) /8 BS 1/4 BST /8 BS 3/8 BST /4 BS 3/8 BST /8 BS 1/2 BST /4 BS 1/2 BST /8 BS 1/2 BST /8 BS 3/4 BST /4 BS 3/4 BST /8 BS 3/4 BST /2 BS 3/4 BST /8 BS 1" BST /2 BS 1" BST /4 BS 1" BST Hex Socket /8 BS /4 BS /8 BS /2 BS /4 BS " BS * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 25

24 Fittings 3304 Reducing Socket Thre ad /4 BS 1/8 BS /8 BS 1/8 BS /8 BS 1/4 BS /2 BS 1/8 BS /2 BS 1/4 BS /2 BS 3/8 BS /4 BS 3/8 BS /4 BS 1/2 BS " BS 3/4 BS Reducing Nipple Numbe r /4 BST 1/8 BST /8 BST 1/8 BST /8 BST 1/4 BST /2 BST 1/8 BST /2 BST 1/4 BST /2 BST 3/8 BST /4 BST 1/4 BST /4 BST 3/8 BST /4 BST 1/2 BST " BST 1/2 BST " BST 3/4 BST Hex Nipple Numbe r /8 BST /4 BST /8 BST /2 BST /4 BST " BST AG 26 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

25 Fittings Long Hex Barrel Nipple 3327 Length (nches) /8 BST /8 BST /8 BST /8 BST /4 BST /4 BST /4 BST /4 BST /8 BST /8 BST /8 BST /8 BST /2 BST /2 BST /2 BST Male To Female 90 lbow 3400 (Female) (Male) /8 BS 1/8 BST /4 BS 1/4 BST /8 BS 3/8 BST /2 BS 1/2 BST See Next age For 45 lbows * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 27

26 Fittings Male To Female 45 lbow Numbe r (Fema le) (Male) /8 BS 1/8 BST /4 BS 1/4 BST /8 BS 3/8 BST /2 BS 1/2 BST See revious age For 90 lbows Female 90 lbow Numbe r /8 BS /4 BS /8 BS /2 BS Female 45 lbow Numbe r /8 BS /4 BS /8 BS Male 90 lbow Numbe r (Male) (Male) /8 BST 1/8 BST /4 BST 1/8 BST /4 BST 1/4 BST /8 BST 1/4 BST /8 BST 3/8 BST /2 BST 3/8 BST /2 BST 1/2 BST AG 28 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

27 Fittings Female Tee 3700 (Female) /8 BS /4 BS /8 BS /2 BS Female Cross 3900 (Female) /8 BS /4 BS /8 BS /2 BS Male Run/Female Tee 4000 (Male) (Female) /8 BST 1/8 BST /4 BST 1/4 BST /8 BST 3/8 BST /2 BST 1/2 BST * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 29

28 Metric Fittings 3152M Metric Hex lug 3200M 3152M12 - M12x M14 - M14x M16 - M16x M18 - M18x M20 - M20x M22 - M22x M24 - M24x Male To Female Adaptor (Female) (Ma le) 3200M1202 1/8"BS M12x M1204 1/4"BS M12x M1404 1/4"BS M14x M1604 1/4"BS M16x M Reducing Bush (Female) (Ma le) 3224M1402 1/8"BS M14x M1602 1/8"BS M16x M1804 1/4"BS M18x M2004 1/4"BS M20x M2204 1/4"BS M22x M2206 3/8"BS M22x M2406 3/8"BS M24x AG 30 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

29 Metric Fittings Hex Socket 3300M Threa d 3300M12 * - M12x M14 * - M14x M16 * - M16x M18 * - M18x M20 * - M20x M22 * - M22x M24 * - M24x Reducing Nipple Threa d 3324M1202 1/8"BST M12x M1204 1/4" BST M12x M1404 1/4" BST M14x M1604 1/4" BST M16x M1804 1/4" BST M18x M2004 1/4" BST M20x M2006 3/8" BST M20x M2206 3/8" BST M22x M2406 3/8" BST M24x M if requiring NT s ut NT at end of No (eg 3224xxxxNT) * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 31

30 NT Fittings NT3200BS Male BS to Female NT adaptor a rt NT BS NT BS NT BS NT BS Standa rd a ck. Thre a d (Fem ale ) Threa d (Ma le) rice e r ie ce 1 1/8 NT 1/8 BST /4 NT 1/4 BST /8 NT 3/8 BST /2 NT 1/2 BST NT NT NT NT Standa rd a ck NT Hex Socket NT Thre ad rice e r ie ce 1 1/ / / NT NT Hex lug Available n Hollow and Solid Configuration a rt Standa rd a ck NT Thre a d rice e r ie ce NT 1 1/ NT 1 1/ NT 1 3/ NT 1 1/ AG 32 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

31 Airline Using a special beaded barb design, TTON airline fittings provide unparalleled security against the hose pulling off the barb. They are available in sizes ranging from 3/16" to 1", and are manufactured from high quality DZR brass alloy. ADVANTAGS Almost impossible to pull hose off. The 6 barbs give exceptional sealing properties, while the end bead provides a shoulder preventing any longitudinal movement of the hose. For added integrity two hose clips may be used. ALCATONS Use with all rubber, plastic and other flexible hoses. Generally used where lower pressures (750 ka) are encountered, although with the correct selection of hose and clamp, higher pressures can be accommodated. WORKNG RSSURS TTON AirLine Fittings should be used where lower pressures exist (1000 ka [145 S] maximum). ASSMBLY. Slide clamp onto hose.. ush hose fully onto barb.. osition clamp in the centre of the barb and tighten. SCAL SZS Other sizes not specified are available upon request. A R L N * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 33

32 Airline 201 Swivel Connector Consists of Nut and Hose Barb A R L N /16 G 1/ /16 G 1/ /4 G 1/ /4 G 3/ * 50 1/4 G 1/ /16 G 1/ /16 G 3/ /16 G 1/ /8 G 1/ /8 G 3/ /8 G 1/ /2 G 3/ /2 G 1/ /4 G 3/ " G 1" M mm G 1/2 TBA 202 Male lbow /16 1/8 BST /4 1/8 BST /4 1/4 BST /16 1/8 BST /16 1/4 BST /8 1/8 BST /8 1/4 BST /8 3/8 BST /2 1/4 BST /2 3/8 BST /2 1/2 BST /8 3/8 BST /8 1/2 BST /4 1/2 BST /4 3/4 BST " 3/4 BST " 1" BST AG 34 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

33 Airline AirLine Tee / / / / / / / " * ALSO AVALABL AS Y-C COD SZ AirLine lbow / / / / / / / AirLine Joiner 205 A R L N / / / / / / / " * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 35

34 Airline 206 Male Branch Tee /16 1/8 BST /4 1/8 BST /4 1/4 BST /16 1/8 BST /16 1/4 BST /8 1/8 BST /8 1/4 BST /8 3/8 BST /2 3/8 BST /2 1/2 BST /8 3/8 BST /4 3/4 BST Female Connector A R L N /16 1/8 BS /16 1/4 BS /4 1/8 BS /4 1/4 BS /4 3/8 BS /4 1/2 BS /16 1/8 BS /16 1/4 BS /16 3/8 BS /8 1/8 BS /8 1/4 BS /8 3/8 BS /8 1/2 BS /2 1/4 BS /2 3/8 BS /2 1/2 BS /8 3/8 BS /4 3/4 BS AG 36 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

35 Airline Male Connector /16 1/8 BST /16 1/4 BST /4 1/8 BST /4 1/4 BST /4 3/8 BST /4 1/2 BST /4 3/4 BST /16 1/8 BST /16 1/4 BST /16 3/8 BST /16 1/2 BST /8 1/8 BST /8 1/4 BST /8 3/8 BST /8 1/2 BST /8 3/4 BST /2 1/8 BST /2 1/4 BST /2 3/8 BST /2 1/2 BST /2 3/4 BST /8 1/4 BST /8 3/8 BST /8 1/2 BST /8 3/4 BST /4 1/4 BST /4 3/8 BST /4 1/2 BST /4 3/4 BST /4 1" BST " 1/2 BST " 3/4 BST " 1" BST A R L N * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 37

36 209ST Airline Swivel Male Connector Hose s Free To Rotate ndependently. 205R 209ST0404-1/4 1/4 BST ST0606-3/8 3/8 BST ST0808-1/2 1/2 BST ST1212-3/4 3/4 BST Air Line Joiner A R L N 205R /4 3/ R /16 1/ R /8 1/ R /8 5/ R /2 5/ R /2 3/ R /8 3/ R /8 1/ R /4 1/ R /4 5/ R " 3/ AG 38 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

37 Conversion Tables ressure S ka BAR Torque ftlb Nm Nm ftlb ftlb = 1.36 Nm 1 Nm =0.738 ftlb s Used on Brass Fittings Size 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 45 Flare 5/ /8-24 7/ /2-20 5/8-18 3/4-16 7/8-14 1" 1/16-14 UNF UNF UNF UNF UNF UNF UNF UN nverted Flare 5/ /8-24 7/ /2-20 5/8-18 3/4-18 7/8-18 1" 1/16-14 UN UNF UNS UNF UNF UNS UNS UN Compression 5/ /8-24 7/ /2-24 9/ / / "-18 UNF UNF UNS UNS UNF UN UN UNS * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 39

38 Lever Taps & Cocks T A S Lever Taps are precision manufactured and ground to ensure positive shut off action. They are available in sizes ranging from 1/8" to 1/2", and are manufactured from high quality grade brass alloy. ADVANTAGS Lever Taps are compact and particularly suitable for confined spaces. Ground spindle and seat provide good metal to metal sealing properties. ALCATONS Use where lower pressures exist and precise volume/pressure control is not required. Suitable for fuel, air and water. WORKNG RSSURS Lever Taps should be used where pressures do not exceed 825 ka [120 S]. AG 40 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

39 DB1 Lever Taps & Cocks Bent Drain Cock DT3 N LN OFF B02 1-1/8 BST B04 1-1/4 BST CB04 1-1/4 BST CB04 is Chrome lated Drain Cock /8 BST /4 BST /8 BST T A S 104 Female Lever Tap /8 BS /4 BS Male To Female Lever Tap (Female) (Male) /8 BS 1/8 BST /4 BS 1/4 BST * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 41

40 Needle Valves Needle Valves allow precise control from fully off to fully on. Manufactured from high quality DZR brass alloy, Needle Valves are available in a variety of connections with sizes ranging from 1/8" to 3/8". n all needle valves Viton o'rings are used. ADVANTAGS recise control due to metal to metal seals and fine thread screw-down. Good pressure rating. Suitable for fuels, water and air. V A L V S ALCATONS recision instrumentation, hydraulic control systems, and anywhere precise control is needed. WORKNG RSSURS AND TMRATUR TTON Needle Valves should not be used where pressures exceed 3447 ka [500 S] or 100 C. ASSMBLY Where possible, pressure side should be toward valve seat, not spindle. All Needle valves except NV41, NV43, NV40 are approved for use with gas (A.G.A. Approval :4104). Operating Temperature 0 to +90 AG 42 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

41 NV40 Needle Valves 45 Flare Angle Needle Valve * 1 1/4 1/8 BST * 1 5/16 1/8 BST * 1 3/8 1/4 BST NV41 Compression Angle Needle Valve NV * 1 3/16 1/8 BST * 1 1/4 1/8 BST * 1 5/16 1/8 BST * 1 3/8 1/4 BST Compression Male Needle Valve V A L V S /16 1/8 BST /4 1/8 BST * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 43

42 Needle Valves Barb Angle Needle Valve NV /16 1/8 BST /4 1/8 BST /16 1/8 BST /16 1/4 BST /8 1/4 BST Female Needle Valve NV104 V A L V S /8 BS /4 BS /8 BS Male Needle Valve NV /8 BST /4 BST Male to Female Needle Valve (Female) (Male) /8 BS 1/8 BST /4 BS 1/4 BST NV404 AG 44 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

43 Fleet Fit Fleet fit push-in fittings are now available from Titon. lease call us for sizes, prices and any other information you require. NO FF3 MAL CONNCTOR MRAL NO.FF13 MAL RUN T MTRC NO FFM3 MAL CONNCTOR M NO. FFM4 TUB UNON M NO. FF4 TUB UNON NO.FF11 TUB LBOW NO.FFM5 MAL LBOW M NO.FF5 MAL LBOW NO. FF14 TUB T NO.FFM12 MAL BRANCH T M NO.FF12 MAL BRANCH T NO. FF31F FMAL BULKHAD F NO.FFM11 TUB LBOW M M S C NO. FF31 BULKHAD UNON NO. FFM14 TUB T M NO.FF5 45 MAL LBOW NO.FF64 BLANKNG LUG NO. FFM31 BULKHAD UNON M Working pressure ka (0-150psi) designed for - heavy transport industry Airbrake systems - Airbrake tube SA J844 Dot - rated brass * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 45

44 BUL Lightweight Bulkhead Union Complete with nut. Length (mm) Male BU02L /4 BSF 1/8 BS 9.97 BU04L /8 BSF 1/4 BS BU Bulkhead Union Complete with lock washer and nut. Length (nches) Male BU /8 UNF 1/8 BST BU /4 UNF 1/4 BST BU /8 UNF 3/8 BST Lock Nut M S C G 1/ G 1/ G 3/ G 1/ G 3/ G 1" Self Store Fitting a rt Sta ndard a ck Thre ad rice e r ie ce /4 1/ /8 1/ /8 3/ /2 1/ AG 46 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

45 Miscellaneous Fuel Filter Adaptor - Long Nose 06C 06C /4 1/2 x 20 T C /16 1/2 x 20 T C /8 1/2 x 20 T C-704 1/4 BS C-804 LBOW 1/4 BS Fuel Filter Adaptor 6C /4 1/2 x 20 T C /16 1/2 x 20 T C /8 1/2 x 20 T C M S C Drain Cock DC DC2 1-1/8 BST DC4 1-1/4 BST DC6 1-3/8 BST DC8 1-1/2 BST Relief Valve TF206 Release ressure ka 1/4 BST ka 3/8 BST ka 1/2 BST * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 47

46 Hose Clips 295 Mild Steel Jubilee Hose Clips Numbe r These clips are zinc plated and approved to BS5315. Size Diameter min (mm) Diameter max (mm) OOO MOO OO OX A X A X X X ½ C L S 296 Stainless Steel Jubilee Hose Clips These clips are approved to BS5315. Numbe r Size Diameter min (mm) Diameter max (mm) OOO MOO OO OX A X A X X X AG 48 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

47 Hose Clips Oetiker 2-ar Clamps ka 11 Select nominal clamp size nearest to, but larger than hose OD Numbe r Nominal Size Open Size mm Closed Size mm / / / / / / / / / / " " 1/ " 5/ CRMNG LRS C L S * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 49

48 Ball Valves (AGA GAS AROVD) 070 "BRLN" FULL FLOW BALL VALV FOR GAS SO 7/1 Rp FMAL/FMAL TCHNCAL FATURS: Suitable for industrial, pneumatic, domestic and hydraulic installation: hot water, dry steam, unleaded gasoline, fuel, gas-oil, kerosene, oils, GAS, compressed air, etc. ( not suitable with methyl alcohol and saturated steam). Maximum working Temperature: 60 C Minimum working temperature: -20 C Working pressure for gas: N1 to N4 (see diagram on page 68), for other purposes (see diagram) Available in all sizes from 1/4" up to 2" to BS21-DN 2999-SO 7/1 Rp parallel female/female. COD V301 V302 V303 V304 V305 V306 V307 V308 SZ 1/4" 3/8" 1/2" 3/4" 1" 11/4" 11/2" 2" A B C D F G RC "BRLN" FULL FLOW BALL VALV FOR GAS SO 7/1 R MAL/FMAL TCHNCAL FATURS: Suitable for industrial, pneumatic, domestic and hydraulic installation: hot water, dry steam, unleaded gasoline, fuel, gas-oil, kerosene, oils, GAS, compressed air, etc. ( not suitable with methyl alcohol and saturated steam). Maximum working Temperature: 60 C Minimum working temperature: -20 C Working pressure for gas: N1 to N4 (see diagram on page 68), for other purposes (see diagram) Available in all sizes from 1/4" up to 2" to BS21-DN 2999-SO 7/1 Rp parallel female/female. V A L V S COD V321 V322 V323 V324 V325 V326 V327 V328 SZ 1/4" 3/8" 1/2" 3/4" 1" 11/4" 11/2" 2" A B C D F G RC AG 50 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

49 072 "BRLN" FULL FLOW BALL VALV FOR GAS SO 7/1 Rp FMAL/FMAL T HANDL Ball Valves (AGA GAS AROVD) Nickle lated Brass TCHNCAL FATURS: Suitable for industrial, pneumatic, domestic and hydraulic installation: hot water, dry steam, gasoline, fuel, gas-oil, kerosene, oils,gas, compressed air, etc. ( not suitable with methyl alcohol and saturated steam). Maximum working Temperature: 60 C Minimum working temperature: -20 C Working pressure for gas: N1 to N4 (see diagram on page 68), for other purposes (see diagram) Available in all sizes from 1/4" up to 2" to BS21-DN 2999-SO 7/1 Rp parallel female/female. COD V351 V352 V353 V354 V355 SZ 1/4" 3/8" 1/2" 3/4" 1" A B C D F G RC "BRLN" FULL FLOW BALL VALV FOR GAS SO 7/1 R MAL/FMAL T HANDL TCHNCAL FATURS: Suitable for industrial, pneumatic, domestic and hydraulic installation: hot water, dry steam, unleaded gasoline, fuel, gas-oil, kerosene, oils, GAS, compressed air, etc. ( not suitable with methyl alcohol and saturated steam). Maximum working Temperature: 60 C Minimum working temperature: -20 C Working pressure for gas: N1 to N4 (see diagram on page 68), for other purposes (see diagram) Available in all sizes from 1/4" up to 2" to BS21-DN 2999-SO 7/1 Rp parallel female/female. COD V371 V372 V373 V374 V375 SZ 1/4" 3/8" 1/2" 3/4" 1" A B C D F G RC V A L V S * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 51

50 Ball Valves (AGA GAS AROVD) AG 52 * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST

51 Order Form hoto-copy and post, fax, phone or to... TTON O Box , Onehunga, Auckland, New Zealand. Telephone (64) , Fax (64) sales@titon.co.nz Date: / / Charge To: Order No: Ordered By: Special nstructions: Ship To: lace out of stock items on back order? Yes No Qty roduct Code or Description Unit Cost Discount * Limited Stock - check for availability * All prices are in New Zealand Dollars ex GST AG 53