0039 BRACKET, SPRING RETENTION
|
|
|
- Gabriel McKinney
- 5 years ago
- Views:
Transcription
1 0039 BRACKET, SPRING RETENTION SPRING RETENTION BRACKET 2-REQ'D / TRIM RING /16 11/32 27/32 n 1/8 5/16 3/4 1/32 03/2008 SCALE 1:1 UNITS: INCHES MAT'L: GALV.
2 Tel: / Fax: Boul. Maurice Duplessis, Montreal, Quebec, Canada, H1C 1G / 1054 (AL) BRACKET, CATERPILLAR 3/4" & 5/8" BAR HANGERS ACCEPTS #10 CARRIAGE BOLT TO SECURE BRACKET 1253 OR POSITIONS FOR 1/2" BAR HANGERS, 1287 & 1240 LOCK FOR 1/2" BAR HANGERS 1240 OR " 17/32" 2-15/16" 9/2016 SCALE 1:2 UNITS: INCHES MAT'L: GALV. / AL.
3 Tel: / Fax: Boul. Maurice Duplessis, Montreal, Quebec, Canada, H1C 1G / 1054 (AL) BRACKET, CATERPILLAR 3/4" & 5/8" BAR HANGERS ACCEPTS #10 CARRIAGE BOLT TO SECURE BRACKET 1253 OR POSITIONS FOR 1/2" BAR HANGERS, 1287 & 1240 LOCK FOR 1/2" BAR HANGERS 1240 OR " 17/32" 2-15/16" 9/2016 SCALE 1:2 UNITS: INCHES MAT'L: GALV. / AL.
4 Tel: / Fax: Boul. Maurice Duplessis, Montreal, Quebec, Canada, H1C 1G w/ 1287 & 1253/ BRACKETS, CATERPILLAR, APPLICATION ASSEMBLIES TYPICAL APPLICATION ON 1061, 1231, 1283, 1286 SERIES PLASTER FRAMES SCALE 1: TYPICAL APPLICATION ON A PLASTER RING & REFLECTOR SCALE 1:4 5 3/8 MAX. 2 5/8 MIN. 2 15/ /16 MIN. 5/2014 SCALE 1:2 UNITS: INCHES MAT'L: GALV.
5 Tel: / Fax: Boul. Maurice Duplessis, Montreal, Quebec, Canada, H1C 1G1 1254/1287K - BUTTERFLY BRACKET & BAR HANGER KIT CONTAINS TWO OF EACH OF: 1254 BUTTERFLY BRACKET 1287 BAR HANGER SET #10-24 CARRIAGE BOLT #10-24 WING NUT 1254K - BUTTERFLY BRACKET KIT CONTAINS TWO OF EACH OF: 1254 BUTTERFLY BRACKET #10-24 CARRIAGE BOLT #10-24 WING NUT 1054/1287K - CATERPILLAR BRACKET & BAR HANGER KIT CONTAINS TWO OF EACH OF: 1054 CATERPILLAR BRACKET 1287 BAR HANGER SET #10-24 CARRIAGE BOLT #10-24 WING NUT 1054K - CATERPILLAR BRACKET KIT CONTAINS TWO OF EACH OF: 1054 CATERPILLAR BRACKET #10-24 CARRIAGE BOLT #10-24 WING NUT ALL KITS, BAGGED, UNASSEMBLED 09/2015 MAT'L: GALV
6 1217 BRACKET, SOCKET, FOR PAR16 & PAR20 1 9/16 n 1-7/ /16 3 7/ /2004 SCALE 1:1 UNITS: INCHES MAT'L: GALV
7 1227(AL) SOCKET CUP, Ø3", w/ 1-9/16" WIRE HOLE ACCEPTS 1228 SPRING IN CHANELLED AREA (RETAINED BY SOCKET) 1/8 x 3/8 BUMP 1/16 HIGH 5/32 x 11/32 SLOT 2 7/8 Ø.17 HOLE Ø.28 C'SINK Ø3 Ø9/16 2 5/8 07/2012 SCALE 1:1 UNITS: INCHES MAT'L: GALV or ALUM
8 1227(AL)-10 SOCKET CUP, Ø3", W/ Ø9/16" & Ø7/8" WIRE HOLES & 4 VENT HOLES ACCEPTS 1228 SPRING IN CHANELLED AREA (RETAINED BY SOCKET) 1/8 x 3/8 BUMP 1/16 HIGH 5/32 x11/32 SLOT n 7/8 HOLE Ø1/2 HOLE (VENT) 4-PLCS 2 7/8 Ø.17 HOLE Ø.28 C'SINK Ø9/16 HOLE Ø3 2 5/8 07/2012 SCALE 1:1 UNITS: INCHES MAT'L: GALV or ALUM
9 1227(AL)-11 SOCKET CUP, Ø3", W/ Ø9/16" WIRE HOLE & 4 VENT HOLES ACCEPTS 1228 SPRING IN CHANNELED AREA (RETAINED BY SOCKET) 1/8 x 3/8 BUMP 1/16 HIGH 5/32 x 11/32 SLOT Ø1/2 HOLE (VENT) 4 -PLCS 2 7/8 Ø.17 HOLE Ø.28 C'SINK Ø9/16 HOLE Ø3 2 5/8 07/2012 SCALE 1:1 UNITS: INCHES MAT'L: GALV or ALUM
10 1227(AL)-13 SOCKET CUP, Ø3", W/ 'D' WIREWAY & 1 HOLE ACCEPTS 1228 SPRING IN CHANNELED AREA (RETAINED BY SOCKET) 1/8 x 3/8 BUMP 1/8 HIGH 5/32 x 11/32 SLOT n /8 Ø.17 HOLE Ø.28 C'SINK Ø3 3/8 x 3/8 'D' HOLE (WIREWAY) 2 5/8 07/2012 SCALE 1:1 UNITS: INCHES MAT'L: GALV or ALUM
11 1227(AL)-14 SOCKET CUP, Ø3", GALV. W/ 'D' WIREWAY & 9/16" HOLE ACCEPTS 1228 SPRING IN CHANNELED AREA (RETAINED BY SOCKET) 1/8 x 3/8 BUMP 1/8 HIGH 2 7/8 'D' HOLE Ø.17 HOLES Ø.28 C'SINK Ø9/16 HOLE 5/32 x 11/32 SLOT 3/8 x 3/8 'D' HOLE (WIREWAY) Ø 3 2 5/8 07/2012 SCALE 1:1 UNITS: INCHES MAT'L: GALV or ALUM
12 1227(AL)-11 SOCKET CUP, Ø3", W/ Ø9/16" WIRE HOLE & 4 VENT HOLES ACCEPTS 1228 SPRING IN CHANNELED AREA (RETAINED BY SOCKET) 1/8 x 3/8 BUMP 1/16 HIGH 5/32 x 11/32 SLOT Ø1/2 HOLE (VENT) 4 -PLCS 2 7/8 Ø.17 HOLE Ø.28 C'SINK Ø9/16 HOLE Ø3 2 5/8 07/2012 SCALE 1:1 UNITS: INCHES MAT'L: GALV or ALUM
13 1235 BRACKET, TRANSFORMER (MR16), GALV 1235AL " ", ALUM. ACCEPTS TRANSFORMER SPRING /4 FITS "A" HOLES ON 1231 SERIES PLASTER FRAMES 3 1/8 C-C 3 17/32 1 1/4 2 7/16 11/2004 SCALE 1:1 UNITS: INCHES MAT'L: SEE TITLE
14 1236 SOCKET BOX, SNAP-IN, Ø9/16" HOLE " ", Ø 7/8" HOLE, & GROUND WIRE SNAPS INTO HOUSINGS 1237 & 1238 SLOTS ACCEPT JUNCTION BOX 1257 n 3/16 X 7 n 1/8 1 25/32 n 7/8 ( ) n 9/16 (1236) 1 13/16 SLOTS (FOR 1257) 2 23/32 11/2004 SCALE 1:1 UNITS: INCHES MAT'L: GALV.
15 Tel: / Fax: Boul. Maurice Duplessis, Montreal, Quebec, Canada, H1C 1G BRACKET, SOCKET, FOR 1243 HOUSINGS " " 8/2013 SCALE 1:1 UNITS: INCHES MAT'L: GALV..036
16 Tel: Fax: m 1253 / 1253AL BRACKET, OFFSET, FOR / 1253AL-1 BRACKET, 'L', FOR /32 13/ /4 4 3/4 1/ / /4 4 5/32 9/2010 SCALE 1:2 UNITS: INCHES MAT'L: GALV & ALU
17 Tel: / Fax: Boul. Maurice Duplessis, Montreal, Quebec, Canada, H1C 1G / 1254 (AL) BRACKET, BUTTERFLY FURRING STRIP CHANNEL 1/2"x 1-1/2" CHANNEL 1/2" EMT (x2) ACCEPT #10 CARRIAGE BOLT TO SECURE BRACKET 1253 OR /16" LOCK FOR 1/2" BAR HANGERS 1240 OR POSITIONS FOR 1/2" BAR HANGERS, 1287 & 1240 POSITION 5/8" - 3/4" BAR HANGERS LOCK FOR 3/4: BAR HANGERS FEATURE APPLICATIONS 6-1/8" 2-1/16" 09/2016 SCALE 1:1.5 UNITS: INCHES MAT'L: GALV. / AL.
18 Tel: / Fax: Boul. Maurice Duplessis, Montreal, Quebec, Canada, H1C 1G1 1254/1287K Application 1. Attatch 1254 Butterfly bracket in the kit to the 1253 bracket attached to the plaster frame using the wing nut and bolt 2. Slide Female 1287 bar hanger through the 1254 bracket 3. Slide Male 1287 into the Female 1287 Please Note: In the illistration the location of the 1287 is the default, however please place into one of the 4 other locations to meet you requirements Wingnut & Bolt /8 MAX (Not Included in Kit) 2 5/8 MIN. 6 1/8 14 3/16 MIN. 5/2014 UNITS: INCHES MAT'L: GALV.
19 Tel: / Fax: Boul. Maurice Duplessis, Montreal, Quebec, Canada, H1C 1G / 1254 (AL) BRACKET, BUTTERFLY FURRING STRIP CHANNEL 1/2"x 1/2" CHANNEL 1/2" EMT (x2) ACCEPT #10 CARRIAGE BOLT TO SECURE BRACKET 1253 OR /16" LOCK FOR 1/2" BAR HANGERS 1240 OR POSITIONS FOR 1/2" BAR HANGERS, 1287 & 1240 POSITION 5/8" - 3/4" BAR HANGERS LOCK FOR 3/4: BAR HANGERS FEATURE APPLICATIONS 6-1/8" 2-1/16" 09/2016 SCALE 1:1.5 UNITS: INCHES MAT'L: GALV. / AL.
20 Tel: / Fax: Boul. Maurice Duplessis, Montreal, Quebec, Canada, H1C 1G w/ 1287 & 1253/ BRACKETS, BUTTERFLY, APPLICATION ASSEMBLIES TYPICAL APPLICATION ON 1061, 1231, 1283, 1286 SERIES PLASTER FRAMES SCALE 1: TYPICAL APPLICATION ON A PLASTER RING & REFLECTOR SCALE 1:4 5 3/8 MAX. 2 5/8 MIN. 6 1/8 14 3/16 MIN. 5/2014 SCALE 1:2 UNITS: INCHES MAT'L: GALV.
21 1280 BRACKET, BAR HANGER ACCEPTS: 1240 & 1287 BAR HANGERS. ATTACHES : 1 TO ANY PLASTER FRAME WITH MATING RIVET/SCREW HOLES. (HOLES 3-3/4 C-C REQUIRED ON PLASTER FRAME). 2 SLIP & LOCK FEATURE TO FIT 1283-SERIES PLASTER FRAME. ANTI-VIBRATION DIMPLE 'INSIDE' VIEW 1 2 'OUTSIDE' VIEW /4 C-C /32 1 1/32 9/16 7 1/2 29/32 2/2007 SCALE 1:2 UNITS: INCHES MAT'L: GALV.
22 BRACKET, BAR HANGER, FLAT ACCEPTS: 1240 & 1287 BAR HANGERS. ATTACHES: 1 VERTICALLY TO ANY PLASTER FRAME WITH MATING RIVET/SCREW HOLES. (HOLES 3-3/4 C-C REQUIRED ON PLASTER FRAME). 2 SLIP & LOCK FEATURE TO FIT 1283-SERIES PLASTER FRAMES ANTI-VIBRATION DIMPLE /8 9/16 23/32 3-3/4 C-C 7-1/2 2/2007 SCALE 1:2 UNITS: INCHES MAT'L: GALV.
23 Tel: / Fax: Boul. Maurice Duplessis, Montreal, Quebec, Canada, H1C 1G / BRACKET BENT AND BRACKET STRT. FOR TORSION SPRING 1-5/8" 7/16" 1-27/32" 1-9/16" 5/16" /8" 1/2" 2-1/8" 1-29/32" /2016 SCALE 1:1 UNITS: INCHES MAT'L: GALV
AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
![AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]](/thumbs/79/79067902.jpg "AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]")
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
AC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY. INSTALLATION INSTRUCTIONS Document Number:
Minarik Variable Speed AC Motor Drives AC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY INSTALLATION INSTRUCTIONS Document Number: 250-0297 These instructions apply to models rated: 7.5 25
ASSEMBLY INSTRUCTIONS for 16 WAY GT MIXED 150/280 SEALED CONNECTION SYSTEM
ASSEMBLY INSTRUCTIONS for 16 WAY GT MIXED 150/280 SEALED CONNECTION SYSTEM NOTE: PLEASE CONTACT YOUR DELPHI SALES REPRESENTATIVE WITH ANY QUESTIONS OR COMMENTS CONCERNING THESE ASSEMBLY INSTRUCTIONS. COMPONENT
D-Series High Reliability Circular Connectors
D-Series High Reliability Circular Connectors Technology Company, Inc. integramate D-Series Circular Connectors QA Technology integramate D-Series Connectors are high quality, plastic circular connectors
Zoom UL/cUL Assembly Guide
TM TM Zoom UL/cUL Assembly Guide Assembly Guide TM and Zoom TM Contents Lamp socket assembly... 5 Lens holder assembly... 9 Maintenance... 11 Shutter assembly... 13 Final assembly... 15 19 10 7 9 11 12
Technical Data Sheet Screw Clamps and Universal Clamps
Technical Data Sheet Screw Clamps and Universal Clamps Stepless Screw Clamps PG 178 2 PG 178 for small diameters PG 178 for big diameters Bridge Tongue-in-groove design Interlock with multiple diameter
Cable Connector Housings for D-Subminiature connectors, Series TMC. Catalog E /04 Edition 1
Cable Connector Housings for D-Subminiature connectors, Series TMC www.erni.com Catalog E 023975 08/04 Edition 1 www.erni.com Catalog E 023975 08/04 Edition 1 Table Of Contents Housing versions KSG 200,
Source Four PARNel. Assembly Guide
Source Four PARNel Assembly Guide Table of Contents Final Assembly... 3 Lamp Burner Assembly... 4-5 Housing Assembly... 6-7 Installing a stippled/wave lens... 7 Positioning the stippled/wave lens... 7
Summary of shell housings and accessories Shell housing A Shell housing D EMC housing
Directory chapter 20 Page Summary of shell and accessories........................... 20.02 housing C.......................... 20.04 housing A................................................. 20.08 housing
Assembly Guide. Production Dates: September Present
Assembly Guide Production Dates: September 2004 - Present Copyright Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part : 7062M2500-05.04
31AS2B5-790 (2006) Page 1 of 7 Drive Assembly
31AS2B5-790 (2006) Page 1 of 7 Drive Assembly 31AS2B5-790 (2006) Page 2 of 7 Drive Assembly 1 629-0071 1 S Extension Cord 2 710-0409 4 /P Hex Screw, 5/16-24 x 1.75 3 710-0627 1 /P Hex Screw, 5/16-24 x.75
MODEL R-502 ROUTER ITEM NO PART NO DESCRIPTION PRICE
1 6520038 CORD ASS'Y 1.5 X 2 X 2.5 FOR GBR (110V) 11.98 6520571 CORD ASS'Y 1 X 2 X 2.5 FOR GBR (240V) 13.98 6520025 CORD ASS'Y 1 X 2 X 2.2 EXCEPT ABOVE 13.79 2 6560044 CORD HOLDER 10 0.69 3 6560057 CORD
Prime Railway Services Radial Door - Order Form
Radial Door - Order Form Prime Part # 1130 Customer/Location: Tel: Fax: Quantity: Door ID#: Door Type: Tri Bi Door Location: BR BL AR AL BL Doors Only: Sliding Door or Pan Exterior Door Colour Red Yellow
Allen-Bradley Parts. Solid State Drive Upgrade Kit. Installation Instructions. About this Product
Installation Instructions Solid State Drive Upgrade Kit Catalog No. 6189V-12TSSD4, 6189V-12NSSD4, 6189V-12TSSD8, 6189V-12NSSD8, 6189V-15TSSD4, 6189V-15NSSD4, 6189V-15TSSD8, 6189V-15NSSD8 Inside.. For See
7" Touch Screen Display
7" Touch Screen Display Installation Guide Contents Minimum Requirements...1 Select a Location...1 Initial Setup...2 Unboxing...2 Installation...3 Prepare the Panel...3 Install the Mounting Plate...3 Mount
PARTS BOOKLET
00-0-0-0 PARTS BOOKLET 0 EDITION PARTS BREAKDOWNS / INSTALLS PAGE. JACK & TONGUE. VIEWING PLATFORM. TWO SPEED -. SHIFTERS. OIL RESERVOIR -. PLANETARY 0-. DRIVELINE CONFIGURATIONS -. SLIP CLUTCH PAGES.
Section 9. Corporation EDI
Corporation Strip Socket Storage Racks See page 11 Stubby Clips See page 11 SAE 12-Point Socket Adapter Set See page 1 Reversible Ratcheting Kit See page 3 Empty Plastic Socket Holder See page 11 Section
PERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.
Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac
SINGLE BARREL 1/2 9/16 3/4 7/ /2 1/2 5/8 11/ /8 1 1 /4 1 9 / /4 SINGLE BARREL NEMA TANG DRILLING CTN /8 1 3 /16 CTN 71055
PAGE MECHANICAL LUGS ALUMINUM SAL SERIES AL OR CU DIMENSIONS (IN) MAX. MIN. L W H BOLT B SINGLE BARREL 00 00 00 0 00 00 00 00 00 00 000 *A- *A- *A-/0 A-/0 A-0 A-00 A-0 A-00 A-00 A-00 A-000 # STR /0 STR
ISOLATION RELAY RACK ISOLATION KIT 19 RACK MOUNT RELAY RACK ISOLATION KIT, SLOTTED UNEQUAL FLANGE RACK ISOLATION KIT 23 RACK MOUNT
ISOLATION Info: 9070 = Isolation RELAY RACK ISOLATION KIT 19 RACK MOUNT 9070-1019 19" Rack Mount 23 RACK MOUNT 9070-1023 23" Rack Mount RELAY RACK ISOLATION (KIT) RELAY RACK ISOLATION KIT, SLOTTED 19 RACK
Spec Sheet. OmniReach FTTX Solutions DLX Fiber Optic Connector
ADC s is a Next Generation hardened fiber optic connector designed to provide a cost-effective solution for connecting Outside Plant (OSP) fiber networks. The DLX connector is a miniature hardened connector
Description: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447
Procedure: BRAKE BUSHING REPLACEMENT PROCEDURE Product: Document #: Rev: Page: MODEL 7000, 7000A, & 8000 GYRO 078 1 1 of 14 Description: Detailed procedure on removing old bushing and installing new Brake
Miniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
DIGITAL OBSERVATION GUARD LOW PROFILE PAN TILT KIT USER MANUAL
DIGITAL OBSERVATION GUARD LOW PROFILE PAN TILT KIT USER MANUAL Version 2.1 June 4, 2013 0 Table of Contents Low Profile Pan Tilt Kit Description... 3 Low Profile Pan Tilt Unit Basic Operation... 4 Mounting
Parts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b
RYOBI 10 in. (254 mm) TABLE SAW - MODEL NO. BTS20
A0 OUTFEED SUPPORT RYOBI in. ( mm) TABLE SAW - MODEL NO. BTS0 FIGURE B: OUTFEED SUPPORT 0 OUTFEED SUPPORT... 0 SCREW (/-0 x / in.)... 00 OUTFEED SUPPORT ROD... 00 STOP SCREW (M X mm)... FIGURE C: BLADE
1/2
http://partsradar.arinet.com/scripts/empartisapi.dll?mf&app=ariens&session=27f5776d-d5a8-4417-865b-d472735c5bb5&cat=2&assem=4658&imgma 1/2 Ref # Par t # Descr iption Context Note Foot Note Min Qty UOM
KM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)
KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,
Ø 36 Ø 34 Ø 3,5 Ø 3,5
HEC English version locking system, 8 and contacts Degree of protection IP68/IP69K Crimp termination Diameter 6 mm VDE-, UL-approval Designed for harsh environments Description Male cable connector Drawing
3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com JUNE C- BULLETIN A.C.V.I.M., REV.
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
Ion Memory Upgrade. Visit the AMI Entertainment Web site PM
Ion Memory Upgrade Visit the AMI Entertainment Web site http://www.meritgames.com PM0672-04 COPYRIGHT 2011 AMI ENTERTAINMENT NETWORK, INC. Ion Memory Upgrade CONTENTS: QTY PART NUMBER DESCRIPTION 1 EC0146-06
IBM. Rack Installation Instructions
IBM Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When installing your server in a rack cabinet, consider the following:
Rack Installation Instructions
Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When installing your server in a rack cabinet, consider the following: v Two
Hardware Installation. In this chapter... Custom Labels EMI Noise Filter Installation Mounting DIN Clip Mounting Connections and Wiring
Hardware Installation 2 In this chapter... Custom Labels EMI Noise Filter Installation Mounting DIN Clip Mounting Connections and Wiring Custom Labels Create Custom Labels You may create custom labels
Dimensions in mm in mm in. R in mm in mm mm. Weight. Dimensions in.
Wall Termination / Universal Blind End 1.950 in. 49.53 mm 0.463 in. 11.76 mm 1.00 in. 25.4 mm 0.75 in. 19.05 mm 9.50 in. 241.3 mm R 0.156 in. 3.962 mm 1.962 in. 49.83 mm 0.367 in. 9.322 mm 0.962 in. 24.43
PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
50" langston saturn. replacement knives and parts. precision parts. precision manufacturing. 161 Lee Industrial Drive Blairsville, GA 30512
50" langston saturn replacement knives and parts precision parts. precision manufacturing. 161 Lee Industrial Drive Blairsville, GA 051 800.969.0881 Fax: 706.781.6649 www.corrugatedparts.com sales@corrugatedparts.com
36'' & 48'' E-Z Shutter Fan Installation & Operator s Instruction Manual
6'' & 8'' E-Z Shutter Fan Installation & Operator s Instruction Manual MV-8B 8/99 August 999 MVB Chore-Time Warranty 6'' 8'' EZ Shutter Fans Chore-Time Warranty Chore-Time Equipment warrants each new product
14AZ809H063 GTX2446 (2003) Page 1 of 26 Deck Assembly H 46 Inch
14AZ809H063 GTX2446 (2003) Page 1 of 26 Deck Assembly H 46 Inch 14AZ809H063 GTX2446 (2003) Page 2 of 26 Deck Assembly H 46 Inch 1 17982-0637 1 /P Spindle Reinforcement Plate 2 918-0430B 1 S Spindle Assembly,
DIGITAL Server Rackmount Installation Guide
DIGITAL Server Rackmount Installation Guide Part Number: ER-PCSRA-IA. E01 Digital Equipment Corporation December 1997 The information in this document is subject to change without notice and should not
RIGOL. Installation Guide. RM-DS-1 Rackmount Kit. Digital Oscilloscope. May RIGOL Technologies, Inc.
Installation Guide RM-DS-1 Rackmount Kit DS1000 Series, DS1000CA Series, DS1000E Series, DS1000D Series Digital Oscilloscope May 2009 RIGOL Technologies, Inc. Copyright 2009 RIGOL Technologies, Inc. All
TECHKNOW, INC. Kiosk Order Confirmation System INSTALLATION MANUAL. Revision Date: July 11, 2012 Part # Version 3.2
document Page 1 of 18 TECHKNOW, INC Kiosk Order Confirmation System INSTALLATION MANUAL Revision Date: July 11, 2012 Part # Version 3.2 Techknow, Inc. 393 Mayfield Road Duncan, SC 29334 www.gotechknow.com
Online version - not for reprint
() A Crankcase... B Cylinder... C Muffler... D Oil pump... E Clutch, Chain sprocket... F AV system... G Chain sprocket cover... H Ignition systems... J Wiring harness... 0 K Rewind starter... L Tank housing...
EZ-9000 Tape Dispenser, EZ-9000-RP Tape Dispenser Part Number / MAY 2012 REV 1.0
PLEASE NOTE Some of the part numbers are now different depending on when the unit was manufactured. The drawing will note where the appearance is different and the parts list will give you the correct
Micro Twinax Quick Disconnect NDL Size Package
Micro Twinax Quick Disconnect NDL Size Package Micro Twinax Quick Disconnect NDL Plug 100 and 150 Ohm WAY 014034-2049 100 Differential Twinax 540-1153-000 014034-2050 100 Flexible Twinax 540-1161-000 Ø.250
(Cat. No A1B, -A2B, -A3B, -A3B1, -A4B Series B) Installation Data. Make sure you have these items:
(Cat. No. 1771-A1B, -A2B, -A3B, -A3B1, -A4B Series B) Installation Data Make sure you have these items: Important: Make sure you meet these minimum spacing requirements. 2 3 4 Each enclosure must contain
PNI Connectors. 2.0mm pitch wire to board/wire to wire solutions. Purpose:
PNI Connectors 2.0mm pitch wire to board/wire to wire solutions Purpose: To introduce the PNI wire-to-board and wire-to-wire, crimp style connector from JST. Objectives: Illustrate the intended application.
CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS
CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS FOR USE WITH: HAMMOND Organ Models L-100, M-100 Series, M-l, M-2, M-3 LESLIE Speaker Models 760, 770, 825 KIT CONTENT Console Connector Assembly 043075
A-dec 584 Monitor Mount on a Central Cabinet
Installation Guide A-dec 584 Monitor Mount on a Central Cabinet Before You Begin This procedure applies to the A-dec Inspire TM 592 Central Console and the standard and tall Preference cabinet central
Connector System for Fluorescent Lighting Fixtures. Connectors for In-Line Mounting of Fluorescent Lighting Fixtures. Fully Polarized Connectors
Connector System for Fluorescent Lighting Fixtures Connectors for In-Line Mounting of Fluorescent Lighting Fixtures Fully Polarized Connectors Luminaire Disconnect Connectors Pluggable Lighting Connectors
Star Trac Fitness E-ST 5090 Stepper. Install Guide
Star Trac Fitness E-ST 5090 Stepper Install Guide STAR TRAC E-ST STEPPER Install Guide E-ST 5090 E Series Stepper ASSEMBLY AND SETUP The following parts are included with the base STAR TRAC E-ST STEPPER:
A-dec 586 Ceiling Monitor Mount
Installation Guide A-dec 586 Ceiling Monitor Mount Recommended Tools 7/16" wrench Socket set and ratchet with 6" extension Phillips head and standard screwdrivers Diagonal cutters Level 3/8" drill with
Encore XT Manual Gun Upgrade Kit
Instruction Sheet P/N 1600823-01 Encore XT Manual Gun Upgrade Kit 1600834 Introduction Follow these instructions to upgrade your Encore manual spray gun to the improved design of the Encore XT spray gun.
PIONJÄR. Spare parts list. Petrol drills and breakers 120, 120 AV, 121 A, 130, 130 AV, 131 A
PIONJÄR 0, 0 AV, A, 0, 0 AV, A Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 00 0b 00 PIONJÄR 0, 0 AV, A, 0, 0 AV, A Contents Contents General Information................................................................
Absolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
Heat Containment System (HCS)
Heat Containment System (HCS) Revision Number 1 Wright Line LLC 160 Gold Star Boulevard Worcester, MA 01606 Tel: 800-225-7348 508-852-4300 Fax: 508-365-6178 www.wrightline.com info@wrightline.com All products
TEMPERATURE RATINGS: Terminal Housing: 290 C (554 F) UL94VO Housing: 115 C (239 F) UL94VO
The KO4300 Series Enclosures feature high density double level terminals making them ideal for many electronic applications. They are small to medium in size ranging from 6 to 64 terminals. There are 4
Terminal Junction System (MIL-T and Commercial)
Introduction Product Facts The TJS connections are inherently more reliable than conventional threaded and solder terminations. The user s wiring is crimped to gold plated pin contacts, conforming the
EN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
Prodigy Color-on-Demand System Generation III
Prodigy Color-on-Demand System Generation III Customer Product Manual Issued 10/10 For parts and technical support, call the Finishing Customer Support Center at (800) 433-9319. This document is available
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
Hardware Installation. In this chapter... Custom Labels EMI Noise Filter Installation Mounting DIN Clip Mounting Connections and Wiring
Hardware Installation 2 In this chapter... Custom Labels EMI Noise Filter Installation Mounting DIN Clip Mounting Connections and Wiring Custom Labels Create Custom Labels You may create custom labels
Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
TDM To MiniMech conversion ProceDure
TDM To MiniMech conversion ProceDure (Model 9100 ATM) TDN 07102-00079 Apr 1 2009 CorporATe HeAdquArTers: 522 E. Railroad Street Long Beach, MS 39560 PHONE: (228) 868-1317 FAX: (228) 868-0437 COPYRIGHT
12A-979U190 LC-210SS (2001) Page 1 of 9 Cable Controls
12A-979U190 LC-210SS (2001) Page 1 of 9 Cable Controls 12A-979U190 LC-210SS (2001) Page 2 of 9 Cable Controls 1 746-0939 1 S 6 Spd. Cable 2 656-0613 1 S Pulley Ass'y Multi-Spd. 3 710-0167 1 /P Scr. 1/4-20
M12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET
M12 Connectors Application Advantage Shielded design ETHERLINE Ethernet Cable, Connectors & Tools M12 Field Wireable Connectors Male Female Temperature Range: Max. 85 C Nominal Voltage: Nominal Current:
09. DIN CONNECTORS
. 41 612 CONNECTORS Connectors that comply with 41 612 have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary.
Fits 1 3/4" Resilient Rings. Part # Shaft Height A" 92-A /4" 4.4" 92-A /4" 4.6" Fits 2 1/2" Resilient Rings. Part # Shaft Height A"
Bases 48 Frame Resilient Mount Kit 92-A240 9" Blowers( 2 1/2" Rings) 92-A241 12" Blowers ( 2 1/2" Rings) 92-A242 10" Blowers (2 1/2" Rings) Accessories Base Mounting Adapter Kit For 5 1/2" with flat end
M12 PCB-Connectors 90 Angled. Catalog E /14 Edition 4
M12 PCB-Connectors 90 Angled www.erni.com Catalog E 074617 06/14 Edition 4 Table of Content General...3 Assembly and Solder Recommendations...5 Dimensions and Assembly Recommendation for Standard M12 Male
Allen-Bradley Drives. Instructions. (For 6180 Industrial Computers)
Instructions (For 6180 Industrial Computers) This document describes how to remove or install a Pentium processor in the 6180 Industrial Computer. Processor specifications are also provided. The processor
Online version - not for reprint
(0) A Engine housing... B Cylinder... B Cylinder... C Rewind starter, Ignition system... C Rewind starter, Ignition system... D Chain brake... E Quick tensioner parts... F Air filter, Cover... G Handle
3M Cross-Connect Cabinet Riser Installation Guide
3M Cross-Connect Cabinet Riser Installation Guide Installing riser in stake, hand hole and pad-mount applications Instructions October 2016 78-0015-3063-9-B 2 October 2016 78-0015-3063-9-B Contents 1.
Replacing the PanelMate Power Pro 1785 Series, PanelMate epro 7585x-8 and 7685x-8 Series Backlight Assembly
Replacing the PanelMate Power Pro 1785 Series, PanelMate epro 7585x-8 and 7685x-8 Series Assembly Introduction The Replacement Kit provides a replacement backlight for the PanelMate Power Pro 1785 Series,
Installation Note. 8719D, 8720D, and 8722D Network Analyzer Option 1D5 High Stability Frequency Reference Upgrade Kit
Installation Note 8719D, 8720D, and 8722D Network Analyzer Option 1D5 High Stability Frequency Reference Upgrade Kit Agilent Part Number: 08720-90318 Printed in USA April 2002 Supersedes April 1997 Notice.
PowerFlex 750-Series Power Option Cabinets
Installation Instructions PowerFlex 750-Series Power Option Cabinets Topic Page Introduction 1 Additional Resources 2 What the Kits Contain 2 Bus-bar Selection Tables 4 Approximate Dimensions 8 Remove
INSTALLATION INSTRUCTIONS
2015 F-150 8 MyTouch factory display 360º Vision System (Kit # AVMS-3618) DUE TO THE COMPLEXITY OF THIS KIT PROFESSIONAL INSTALLATION IS REQUIRED CALIBRATION KIT IS REQUIRED FOR FINAL PROGRAMMING -Must
EPX2155. Piston Pump. Owner s Manual. Model Numbers: Stand Upright Cart Low Boy Cart
EPX Piston Pump Owner s Manual Model Numbers: 000 Stand 00 Upright Cart 00 Low Boy Cart SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com
gesis IP+ Installation System in IP IP 68 For use in rough environments Excerpt from the product range MC 04/07
gesis IP+ Installation System in IP 6... IP 68 For use in rough environments Excerpt from the product range 0162.6 MC 04/07 Areas gesis IP+ For electrical installations with increased requirements for
4430 PARTS BOOKLET 2015 EDITION PARTS BREAKDOWNS / INSTALLS PAGE DESCRIPTION 8. OIL RESERVOIR INSTALL
0 PARTS BOOKLET 0 EDITION PARTS BREAKDOWNS / INSTALLS PAGE. TONGUE & JACK. VIEWING PLATFORM. PILLOW BLOCK BEARING. TWO SPEED -. SHIFTERS. OIL RESERVOIR INSTALL -. DRIVELINE CONFIGURATIONS -. DRIVESHAFTS.
DISPLAY HARDWARE SOLUTIONS
DISPLAY HARDWARE SOLUTIONS DISPLAY HARDWARE SOLUTIONS We stock a full-line inventory and offer a wide variety of useful display products like rings, clips, fasteners and suction cups. We also carry a full
Altech s DIN Enclosures by
Altech s DIN Enclosures Since 98 Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
Eaton Heat Containment System (HCS) Installation Guide
Eaton Heat Containment System (HCS) Installation Guide Copyright 2011 Eaton Corporation, Worcester, MA, USA. All rights reserved. Information in this document is subject to change without notice. No part
This specification is approved for use by all Departments and Agencies of the Department of Defense.
INCH - POUNDS MIL-DTL-28731/30C 25 May 2012 SUPERSEDING MIL-C-28731/30B 4 June 1985 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, INSERT (INSULATOR), FEMALE RECTANGULAR, POLARIZED, CENTER SCREW LOCK,
PowerFlex 755 Transition Section and Splicing Kit for Floormount Drives and CENTERLINE 2100 Motor Control Centers
Installation Instructions PowerFlex 755 Transition Section and Splicing Kit for Floormount Drives and CENTERLINE 2100 Motor Control Centers Topic Page Introduction, Compatibility 1 Additional Resources
WLS28-2 Dual Color LED Strip Light
WLS8- Dual Color LED Strip Light Datasheet Banner s LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive environmental ratings, making them an ideal general-purpose LED
AIRCRAFT FINISHING ATTACHING CONTROL SURFACES
AIRCRAFT FINISHING ATTACHING CONTROL SURFACES SECTION 3 Attaching the Wings to the Fuselage Pre-preparation: Remove the wing Root Top Skin before installing the wings to the fuselage. Make two wing support
FIELD MODIFICATION INSTRUCTION. CryoICE BOX Option For AtriCure ORLab ASC1 (400mm) Carts P B
FIELD MODIFICATION INSTRUCTION CryoICE BOX Option For AtriCure ORLab ASC1 (400mm) Carts P000843.B CAUTION: Federal (U.S.A.) law restricts this device to sale by or on the order of a physician. Information
Avenir & kick Powerway
Avenir & kick Powerway System Flag Color -3-Circuit, Shared Neutral and System Ground (SHN) -4-Circuit, 3 with Shared Neutral and System Ground and 1- Isolated Circuit and Ground (3+D) (18" & 24" ONLY)
Q2 XBee Handheld Controller Assembly Guide
Q2 XBee Handheld Controller Assembly Guide Copyright Quantum Robotics Inc. Q2 Controller V1.0 1 Parts List: The kit comes with 14 individual bags. 1. Case Top and Bottom 2. Case Screw Package containing:
Installation Instructions
Installation Instructions (Cat. No. 1794-TBN) 6 1 5 9 4 2 3 10 6 7 8 Component Identification 1 Female flexbus connector 2 Terminal base unit (1794-TBN) 3 Male flexbus connector 4 Keyswitch Set to the
LCD 500,1500. Spare parts list. Handheld core drills. Valid from serial number Construction Tools PC AB No
LCD 500,1500 Spare parts list Handheld core drills LCD 500 LCD 500 LCD 1500 Valid from serial number BGF0006875 BGF0006875 BGF0006875 2015 Construction Tools PC AB No. 3392 5193 01 2015-06 General information
Version SmartyCam HD. Rev. 2
Version 1.01 SmartyCam HD Rev. 2 AVAILABLE VERSIONS SMARTYCAM HD Rev. 2 IN THE BOX (Any microphone cables excluded) SmartyCam HD with 67 or 84 lens, CAN cable or external power cable, USB/AC power adapter,
WIRE AND CABLE MANAGEMENT
Wire and Cable Management Solutions A variety of items are available for managing and organizing wire and cable in common systems and cabinet environments. From cable rack, auxiliary framing to network
Pixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com S: 96.524.8242 CAN: 59.885.5775 Product Diversity
1. Move the cardboard carton close to the installation site, making sure you have adequate space to remove all the contents of the box.
Install the vedge 1000 Router Once you have prepared your site for router installation, unpack the vedge 1000 router. If you plan to install the router in a 19-inch rack, unpack the rack-mount kit as well
TDM-100/150 TO NMD-50 CONVERSION PROCEDURES RL5000
TDM-00/50 TO NMD-50 CONVERSION PROCEDURES RL5000 TDN 0702-00062 March 7, 204 Corporate Headquarters 2405 B Street Long Beach, MS. 39560 Phone: (800) 259-6672 Fax: (228) 868-9445 COPYRIGHT NOTICE 204 Triton.
Assembly Instructions for #5630 Medication PalWOW
Assembly Instructions for #5630 Medication PalWOW Before assembling, please familiarize yourself with all the parts and check to make sure you have all the parts as listed below. A B A & B - The box in
Components. Tools for Setup. Installation Outline
VANTAGE PRO AND VANTAGE PRO PLUS Fan-Aspirated ISS Retrofit Kit Installation Instructions Estimated Time Required: 60 Minutes These instructions describe how to install the Vantage Pro Fan-Aspirated Integrated