Industrial Ethernet & Networking Products

Transcription

1 2015

2 Industril & Networking Products Whether you re strting up new network or migrting from older nlog or seril technologies to IP, OT Systems hve trnsmission products tht fit your pplictions. Our T-Series nd Networking products re right fit solutions for expnding nd optimizing network performnce in vrious medi, while offering the best price-to-performnce rtio nd suit vrious types of pplictions requiring industril grde products. xtension Medi Converters Networks Switches Po Products

3 OT Systems Products Wrrnty 1. Wrrntee. OT Systems (herein Seller ) gurntees the integrity of the products sold to buyers or originl nd Users (herein Buyers ) s whole in regrds of the usges nd pplictions s stipulted in the product mnuls. ) Seller wrrntees tht ll finished products mnufctured under the brnd nme of OT Systems shll be free from defects in mteril nd workmnship right upon the ex-fctory dte nd the products shll conform to the Seller s specifictions s published. b) All Medi Converters nd Network Switches sold to Buyers re under five-yer wrrnty offered by Seller while ll other Accessories re under one-yer wrrnty offered by Seller, subject to the exclusion from libility in the occurrence of misuse, buse or improper hndling, vndlism, or ny cts in contrvention of the instructions, rules, or guidelines s stipulted in the product mnuls. c) Defective products climed for wrrnty will, t the discretion of Seller, be repired or replced in prt or in whole. All repired prts or replcements, re under wrrnty for the remining period of the originl wrrnty period. d) In cse tht the defects cnnot be rectified under the resonble efforts of Seller, s subject to the vilbility of ll possible resources, Seller is open to negotition to rech for n equitble solution with the concerned prties. 2. Cll for Service. To cll for wrrntee service, first contct Seller s Customer Service Representtive. A Return Merchndise Authoriztion number (RMA#) will be issued if the returning of the product is deemed necessry. All clims must be in written form with ll the prticulrs which re self-evident to support such clim. 3. Cost incurred. All freight chrges for return shipments of prts or products re t Buyer s costs. 4. xclusion. The foresid wrrntees re exclusive nd in lieu of nd supersede ll other wrrntees s pproprite whether written, verbl, implied or sttutory. No other implied or sttutory wrrntee of merchntbility or fitness for prticulr purposes shll pply. OT Systems RMA Policy 1. RMA (Return Merchndise Authoriztion) Policy Should you experience ny defects with our products, plese complete RMA request form on our website or send -mil to techsupport@ot-systems.com to request RMA form prior to returning the products. 2. Copy of Purchse Order/Proform Invoice should be enclosed with the returning RMA request form. 3. An RMA number will be given to you. This RMA number must ccompny the product returned to OT systems. The RMA number should be displyed on the outside of the returning pckging. All returned products without n RMA number will be sent bck to the buyer. 4. The purchser is to ber ll delivery chrges to the returning products. 5. RMA numbers re vlid for 30 dys. A new RMA number must be pplied if this RMA 30-dys period expires. 6. All in-wrrnty defective items must hve n RMA number nd repirs re free of chrge. 7. All out-of-wrrnty items to be repired must hve n RMA number. Chrges will be pplied nd invoice with chrgeble items, will be issued to the buyer.

4 xtension l T1100C oc Converter Industril 10/100BAS-TX over Coxil Converter l T1100C2 & CVBS over Cox Converter Industril 10/100BAS-TX plus CVBS over Coxil Converter l T1100CP oc Converter with Po & PoC Industril 10/100BAS-TX over Coxil Converter with Po & PoC l l l l l l T1100CPp oc Converter with Po+ & PoC Industril 10/100BAS-TX over Coxil Converter with Po+ & PoC T1200CPp-RS4 oc Receiver Receiver of 4-port Cox to 1-port 10/100/1000Mbps with PoC T4200CPp-RS8 oc Receiver Rck-mount Receiver of 8-port Cox to 4-port 10/100/1000Mbps with PoC T4200CPp-RS16 oc Receiver Rck-mount Receiver of 16-port Cox to 4-port 10/100/1000Mbps with PoC T1100U over UTP Industril 10/100BAS-TX over UTP xtender T1100UPp over UTP with Po+ & PoW Industril 10/100BAS-TX over UTP xtender with Po+ & PoW Pge 6 Pge 8 Pge 10 Pge 12 Pge 14 Pge 16 Pge 18 Pge 20 Pge 22 l l l l l l l l l l l Medi Converters T1111 Microtype Medi Converter Industril 10/100BAS-TX to 100BAS-FX Medi Converter T1111P-X-MT Medi Converter with Po/PS Industril 10/100BAS-TX to 100BAS-FX Medi Converter with Po/PS T1111H Microtype SFP Medi Converter Hrdened 100BAS-TX to 100BAS SFP Medi Converter T1212H Microtype Gigbit SFP Medi Converter Hrdened 1000BAS-T to 1000BAS SFP Medi Converter T1111PpH SFP Medi Converter with Po+ Hrdened 100BAS-TX to 100BAS SFP Medi Converter with Po+ T1212PpH Gigbit SFP Medi Converter with Po+ Hrdened 1000BAS-T to 1000BAS SFP Medi Converter with Po+ T8181/T SFP Medi Converter Rck-mount 8/16-port 10/100BAS-TX to 8/16-port 100BAS SFP Medi Converter Self-configured Network Switches T4222PpH Self-Configured Gigbit Switch with Po+ Self-Configured Hrdened 4-port 10/100/1000BAS-T + 2-port 1000BAS SFP Switch with Po+ Unmnged Network Switches T2111 Switch Unmnged Industril 2-port 10/100BAS-TX + 1-port 100BAS-FX Switch T4111Pp Switch with Po+ Unmnged Industril 4-port 10/100BAS-TX + 1-port 100BAS SFP Switch with Po+ T8122P Switch with Po Unmnged Industril 8-port 10/100BAS-TX + 2-port 10/100/1000BAS-T SFP Combo Switch with Po Pge 24 Pge 26 Pge 28 Pge 30 Pge 32 Pge 34 Pge 36 Pge 38 Pge 40 Pge 42 Pge 44

5 Unmnged Network Switches l T24122Pp Switch with Po+/PS Unmnged Rck-mount 24-port 10/100BAS-TX + 2-port 10/100/1000BAS-T(X) or 1000M SFP Combo Switch with Po+/PS l T22161 Opticl Switch Unmnged Rck-mount 16-port 100BAS-FX SFP + 2-port 10/100/1000BAS-TX Switch Pge 46 Pge 48 l l l l l l l l l l Mnged Network Switches T8122MPH Mnged Switch with Po/PS Mnged Hrdened 8-port 10/100BAS-TX + 2-port 1000BAS-TX or 100/1000M SFP Combo Switch with Po/PS T8242M Mnged Switch Mnged Industril 8-port 10/100/1000BAS-TX or 100/1000M SFP Combo + 4-port 1000M SFP Switch T16122MH Mnged Switch Mnged Hrdened 16-port 10/100BAS-TX + 2-port 10/100/1000BAS-TX or 100/1000M SFP Combo Switch T24122M Mnged Switch Mnged Industril 24-port 10/100BAS-TX + 2-port 10/100/1000BAS-TX or 1000M SFP Combo Switch T24122MP Mnged Switch with Po Mnged Industril 24-port 10/100BAS-TX + 2-port 1000BAS-TX or 1000M SFP Comber Switch with Po Po Injector & Splitter T-INJ30 Po Injector Hrdened Gigbit 1-port Input + 1-port Po+ Output Injector T-SPT12V Po Splitter Hrdened Gigbit 1-port Po+ In + 1-port Dt Output Po Splitter Accessories MR-C10 19 Rck for Microtype Products T-C12 12-slot 19 Rck-mount Chssis SFP Options Pge 50 Pge 52 Pge 54 Pge 56 Pge 58 Pge 60 Pge 62 Pge 64 Pge 65 Pge 66

6 T1100C Series Industril 10/100BAS-TX over Coxil Converter 1 C 1 xtension Fetures Generl xtension: Security Link over Cox Constnt Dt Rte: 20Mbps(Downlink) / 3Mbps(Uplink) Mximum distnce: 300m over Cox(RG-59/U) Microtype fits within most cmer housings -10 C to 60 C (14 F to 140 F) operting temperture Built-in Surge Protection Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T1100C-T-MT T1100C-R-MT Trnsmitter of 10/100BAS-TX Over Coxil Receiver of 10/100BAS-TX Over Coxil Mounting Options Power Options n Built-in Wll Mount Brcket. n Rck-mountble on 1U rck MR-C10 (Purchse Seprtely). n T-PA/12V 1.25A 12VDC Power Adptor. Open Wire for Terminl Block. n Power Adptor is included for ll sles. Typicl Appliction Network Switch UTP T1100C-T-MT Coxil Cble Up to 300m T1100C-R-MT UTP OR IP Cmer NVR 6

7 T1100C Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX Cbling: 10BAS-T: Ct3,4,5 or bove 100BAS-TX: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 1 x RJ45 Coxil Cbling: Coxil Cble (75 ohm) Connector: 1 BNC (femle) Distnce: Up to 300m on RG-59/U Dt Rte: Downlink (TX to RX) 20Mbps (Constnt) Uplink (RX to TX) 3Mbps (Constnt) nvironmentl Operting Temperture: -10 C to 60 C (14 F to 140 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 0% to 90% non-condensing lectricl nd Mechnicl Input Power: 12VDC Terminl Block Power Consumption: 2.4W Mx. 0.2A@12VDC LD Indictors: Power: Power Sttus Cox: Cox Link Dt: Activity Dimensions (WxDxH): 36.2 x 24.5 x 101 mm Weight: 0.1kg (0.25kg with PA) Csing: Aluminum cse Mounting Options: Wll Mount / MR-C10(1U Rck) Regultory Approvls ISO9001 FCC Prt 15 Clss A N55022 Clss A xtension OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 7

8 T1100C2 Series Industril 10/100BAS-TX plus CVBS Over Coxil Converter 1 C 2 xtension Fetures Generl xtension : Security Link over Cox Simultneous trnsmission of IP nd CVBS over single coxil cble Constnt Dt Rte: 36Mbps(Downlink) / 11Mbps(Uplink) Mximum distnce: 300m over Cox(RG-59/U) Support Auto MDI/MDI-X -10 C to 60 C Operting Temperture Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T1100C2-T T1100C2-R Trnsmitter of 10/100BAS-TX plus CVBS Over Coxil Receiver of 10/100BAS-TX plus CVBS Over Coxil Power Options n T-PA/12V 1.25A 12VDC Power Adptor. Open wire for Terminl Block. n Power Adptor is included for ll sles. Typicl Appliction IP Cmer UTP T1100C2-T Coxil Cble T1100C2-R UTP NVR Anlogue Cmer Cox CVBS Up to 300m Cox CVBS DVR 8

9 T1100C2 Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX I802.3x Flow Control Cbling: 10Bse-T Ct 3, 4, 5 or bove 100Bse-TX Ct 5 or bove Mximum Distnce: 100m Connector 1xRJ45 Coxil Cbling: Coxil Cble (75 ohm) Connector: 1 BNC (femle) Trnsmission Distnce: Up to 300m on RG-59/U Dt Rte: Downlink: 36Mbps@300m (Constnt) Uplink: 11Mbps@300m (Constnt) Technology: SLOC (Security Link over Cox) Video No. of Chnnel: 1 Colour Systems: NTSC, PAL In/Output Impednce: 75Ω In/Output Connector: 1 BNC (femle) In/Output: 1Vp-p lectricl nd Mechnicl Input Power: 200mA Mx Power Consumption: 2.4W Mx Protection: Reverse Polrity: Present Overlod: Present LD Indictors: Power: Power Sttus : Link/Activity, Speed Video: Video IN (Tx) Video OUT (Rx) Cox: Link, Activity Dimensions (WxDxH): 70 x 97 x 23.6 mm Weight: 200g Csing: Aluminum cse Mounting Option: Wll Mounting nvironmentl Operting Temperture: -10 C to 60 C (14 F to 140 F) Storge Temperture: -20 C to 70 C (-4 F to 158 F) Reltive Humidity: 5% to 90% non-condensing Regultory Approvls ISO9001 FCC Prt 15 Clss A N55022 Clss A RoHS N (Surge Stndrds) RJ45: 1kV Cox: 2kV Power: 500V xtension OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 9

10 T1100CP Series Industril 10/100BAS-TX over Coxil Converter with Po & PoC 1 C 1 Po PoC xtension Fetures Generl xtension: Security Link over Cox Support Po (15.4W) nd Power over Cox Constnt Dt Rte: 36Mbps/21Mbps(Downlink), 11Mbps/3Mbps(Uplink) Mximum distnce: 500m over Cox (RG-59/U) Dip Switch for selecting distnce 500m/300m Support Auto MDI/MDI-X function Microtype fits within most cmer housing -10 C to 60 C (14 F to 140 F) operting temperture Accept 48VDC externl power input or Po power input from RJ45 port Built-in Surge Protection Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T1100CP-T-MT T1100CP-R-MT Trnsmitter of 10/100BAS-TX Over Coxil with Po & PoC Receiver of 10/100BAS-TX Over Coxil with Po & PoC Power Options n GS60A48 60W/1.25A 48VDC Power Supply. Open wire for Terminl Block. n Power Supply is to be purchsed seprtely. Typicl Appliction UTP T1100CP-T-MT Coxil Cble T1100CP-R-MT UTP Po IP Cmer Po Up to 500m DC 48V Power Supply Network Switch 10

11 T1100CP Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX I802.3f Power over Cbling: 10Bse-T: Ct3,4,5 or bove 100Bse-TX: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 1 x RJ45 Coxil Cbling: Connector: Distnce: Coxil cble (75 ohm) 1 BNC (femle) Up to 300/500m on RG-59/U (Switch Dt Rte: selectble) <300m <500m Downlink (TX to RX) 36Mbps 21Mbps (Constnt) (Constnt) Uplink (RX to TX) 11Mbps 3Mbps (Constnt) (Constnt) Technology: SLOC (Security Link over Cox) nvironmentl Operting Temperture: -10 C to 60 C (14 F to 140 F) Reltive Humidity: 0% to 80% non-condensing lectricl nd Mechnicl Input Power: 48-57VDC (2 pin connector) or Po Power Consumption: 3W (TX/RX) w/o Po 24W (TX/RX) when PoC in use LD Indictors: Power: Power Sttus Cox Link: Cox Connected Act: Dt is being trnsferred in Cox PoC: Power over Cox in use Po: Stndrd: I 802.3f Port: RJ45 (PD t Rx, PS t Tx) Mode: Alterntive B mode Positive (VCC+): RJ45 Pin 4, 5 Negtive (VCC-): RJ45 Pin 7, 8 Mx. Power Per Port: 12.95W(input) t Rx (Powered Device) 15.4W(output) t Tx (Power Sourcing quipment) Dimensions (WxDxH): 33 x 117 x 24.5 mm Weight: 300g Csing: Aluminum cse Regultory Approvls ISO9001 FCC Prt 15 Clss A N55022 Clss A N (Surge Stndrds) RJ45: 1kV Cox: 2kV Power: 500V xtension OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 11

12 T1100CPp Series Industril 10/100BAS-TX over Coxil Converter with Po+ & PoC 1 C 1 Po + PoC xtension Fetures Generl Po+ (30W) nd Power over Coxil 802.3f/802.3t Complint Dt Rte up to: 90Mbps (Downlink), 90Mbps (Uplink) Mx. Distnce: 1Km over Cox (RG-59/U) Comptible with 4-port stndlone Receiver & Rck Mount 8/16-port Receiver Accept 48VDC externl power input or Po power input from RJ45 port Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T1100CPp-T T1100CPp-R Trnsmitter of 10/100BAS-TX Over Coxil with Po+ & PoC Receiver of 10/100BAS-TX Over Coxil with Po+ & PoC Power Options n GS60A48 60W/1.25A 48VDC Power Supply. Open wire for Terminl Block. n Power Supply is to be purchsed seprtely. Typicl Appliction UTP T1100CPp-T Coxil Cble T1100CPp-R UTP Po IP Cmer Po Up to 1km DC 48V Power Supply Network Switch 12

13 T1100CPp Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX I802.3f Power over I802.3t Power over Cbling: Ct5 or bove Mximum Distnce: 100m Connector 1xRJ45 Coxil Cbling: Coxil Cble (75 ohm) Connector: 1 BNC (femle) Distnce: Up to 1Km on RG-59/U Dt Rte: Downlink: 90Mbps (mx.) Uplink: 90Mbps (mx.) Technology: Power Line Communiction(PLC) nvironmentl Operting Temperture: -10 C to 60 C (14 F to 140 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 5% to 95% non-condensing lectricl nd Mechnicl Input Power: 48V~57VDC (Terminl Block) or I802.3t PD Power Consumption: 8W Mx. (PoC not in use) 60W Mx. (POC in use) Protection: Reverse Polrity: Present Po: Stndrd: I802.3t Mode: B Port: RJ45 Mx. Power per port: 25.5W mx. t RX (Powered Device) 30W mx. t TX (Power Souring quipment) LD Indictors: Power: Power Sttus : SPD, LINK/ACT, Po(Trnsmitter) Cox Dt: LINK(Trnsmitter) / RADY(Receiver) PoC(Receiver) Dimensions (WxDxH): 114 x 82 x 31 mm Weight: 250g Csing: Aluminum cse Mounting Option: Wll Mounting Regultory Approvls ISO9001 FCC Prt 15 Clss A N55022 Clss A N (Surge Stndrds) RJ45: 1kV Cox: 2kV Power: 500V xtension OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 13

14 T1200CPp-RS4 Series Receiver of 4-port Cox to 1-port 10/100/1000Mbps with PoC 1 C 4 PoC xtension Fetures Generl Connecting up to 4 x T1100CPp-T nd IP Cmers 1000Mbps Full-duplex communiction Power over Coxil Dt Rte per port up to: 40Mbps (Downlink), 10Mbps (Uplink) Mx. Distnce: 800m over Cox (RG59/U) Auto MDI/MDI-X for relible detection nd correction for stright-though nd crossover cbles xternl 48VDC power input Wll mount instlltion Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T1200CPp-RS4 Receiver of 4-port Cox to 1-port 10/100/1000Mbps with PoC Power Options n GS120A48 120W/2.5A 48VDC Power Supply. Open wire for Terminl Block. n GS220A48 220W/4.6A 48VDC Power Supply. Open wire for Terminl Block. n Power Supply is to be purchsed seprtely. Typicl Appliction PTZ Po IPC T1100CPp-T x4 T1200CPp-RS4 LAN PTZ Po IPC T1100CPp-T DC 48V Power Supply 14

15 T1200CPp-RS4 Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX I802.3b 1000BAS-T Cbling: Ct5 or bove Mximum Distnce: 100m Connector 1xRJ45 Coxil Cbling: Coxil Cble (75 ohm) Connector: 4 BNC (femle) Distnce: 800m Dt Rte per port: 40Mbps Mx.(Downlink), 10Mbps Mx.(Uplink) Technology: Power Line Communiction(PLC) nvironmentl Operting Temperture: -10 C to 60 C (14 F to 140 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 5% to 90% non-condensing lectricl nd Mechnicl Input Power: 48~57VDC (Terminl Block) Power Consumption: 10W Mx. w/o PoC 250W Mx. w/ PoC Protection: Reverse Polrity: Present Overlod Protection: Present Dimensions (WxDxH): 156 x 120 x 31mm Weight: 500g Csing: Aluminum cse Mounting Option: Wll Mounting Regultory Approvls ISO9001 C N55022 Clss A, FCC prt 15 Clss A Surge Protection: RJ45: 1kV Cox: 2kV Power: 500V xtension OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 15

16 T4200CPp-RS8 Series Rck-mount Receiver of 8-port Cox to 4-port 10/100/1000Mbps with PoC 4 C 8 PoC xtension Fetures Generl Connecting up to 8 x T1100CPp-T nd IP Cmers With full switching cpbility 1000Mbps Full-duplex communiction Power over Coxil(Mx. 400w totl output) Dt Rte per port up to: 40Mbps (Downlink), 10Mbps (Uplink) Mx. Distnce: 800m over Cox (RG59/U) Auto MDI/MDI-X AC power input 19 1U Rck-mount Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T4200CPp-RS8 Rck-mount Receiver of 8-port Cox to 4-port 10/100/1000Mbps with PoC Mounting Options Power Options n 19 1U Rck Mount. n 100~240VAC input. Typicl Appliction PTZ Po IPC T1100CPp-T T4200CPp-RS8 x8 LAN PTZ Po IPC T1100CPp-T 16

17 T4200CPp-RS8 Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX I802.3b 1000BAS-T Cbling: Ct5 or bove Mximum Distnce: 100m Connector: 4 x RJ45 Coxil Cbling: Coxil Cble (75 ohm) Connector: 8 BNC (femle) Distnce: 800m Dt Rte per port: 40Mbps Mx.(Downlink), 10Mbps Mx.(Uplink) Technology: Power Line Communiction(PLC) nvironmentl Operting Temperture: 0 C to 50 C (14 F to 122 F) Storge Temperture: -10 C to 60 C (14 F to 140 F) Reltive Humidity: 5% to 90% non-condensing lectricl nd Mechnicl Input Power: VAC Input Power Consumption: 16W Mx. without PoC 500W Mx. with PoC Dimensions (WxDxH): 483 x 300 x 44mm (1RU) Weight: 4Kg Csing: Aluminum cse Mounting Option: Rck Mount Regultory Approvls ISO9001 N55022 Clss A, FCC prt 15 Clss A Surge Protection: RJ45: 1kV Cox: 2kV Power: 5V xtension OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 17

18 T4200CPp-RS16 Series Rck-mount Receiver of 16-port Cox to 4-port 10/100/1000Mbps with PoC 4 C 16 PoC xtension Fetures Generl Connecting up to 16 x T1100CPp-T nd IP Cmers With full switching cpbility 1000Mbps Full-duplex communiction Power over Coxil(Mx. 800w totl output) Dt Rte per port up to: 40Mbps (Downlink), 10Mbps (Uplink) Mx. Distnce: 800m over Cox (RG59/U) Auto MDI/MDI-X AC power input 19 1U Rck-mount Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T4200CPp-RS16 T4200CPp-RS16P Rck-mount Receiver of 16-port Cox to 4-port 10/100/1000Mbps Switch with PoC Rck-mount Receiver of 16-port Cox to 4-port 10/100/1000Mbps Switch with High Power PoC Mounting Options Power Options n 19 1U Rck Mount. n VAC input. Typicl Appliction PTZ Po IPC T1100CPp-T T4200CPp-RS16 x16 LAN PTZ Po IPC T1100CPp-T 18

19 T4200CPp-RS16 Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX I802.3b 1000BAS-T Cbling: Ct5 or bove Mximum Distnce: 100m Connector: 4 x RJ45 Coxil Cbling: Coxil Cble (75 ohm) Connector: 16 BNC (femle) Distnce: 800m Dt Rte per port: 40Mbps Mx.(Downlink), 10Mbps Mx.(Uplink) Technology: Power Line Communiction(PLC) nvironmentl Operting Temperture: 0 C to 50 C (14 F to 122 F) Storge Temperture: -10 C to 60 C (14 F to 140 F) Reltive Humidity: 5% to 90% non-condensing lectricl nd Mechnicl Input Power: VAC input Power Consumption: 32W Mx. without PoC T4200CPp-RS16: 500W Mx. with PoC T4200CPp-RS16P: 1000W Mx. with PoC Protection: Overlod Protection: Present Dimensions (WxDxH): 483 x 300 x 44mm (1RU) Weight: T4200CPp-RS16: 4Kg T4200CPp-RS16P: 4.5Kg Csing: Aluminum cse Mounting Option: Rck Mount Regultory Approvls ISO9001 N55022 Clss A, FCC prt 15 Clss A Surge Protection: RJ45: 1kV Cox: 2kV Power: 500V xtension OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 19

20 T1100U Series Industril 10/100BAS-TX over UTP xtender 1 UTP 1 xtension Fetures Generl Dt Rte up to: 90Mbps(Downlink), 90Mbps (Uplink) Mx. Distnce: 600m over Ct5e cble. Support Auto MDI/MDI-X Support Wll Mount instlltion -10ºC to 60ºC (14ºF to 140ºF) operting temperture Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T1100U-T T1100U-R Trnsmitter of 10/100BAS-TX over UTP Receiver of 10/100BAS-TX over UTP Mounting Options Power Options n Defult Wll Mount built-in. n T-PA/12V 1.25A 12VDC Power Adptor. Open wire for Terminl Block. n Power Adptor is included for ll sles. NOTS: (1) Trnsmission distnce my vries with qulity nd mteril of Ct5/UTP Cble. Typicl Appliction UTP T1100U-T UTP T1100U-R UTP Up to 600m Network Switch IP Cmer 20

21 Accessories T1100U Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX : Connector: 1xRJ45 Cbling: Ct5 or bove Mximum Distnce: 100m UTP: Cbling: Ct5 or bove Connector: 1xRJ45 Distnce: Up to 600m on Ct5 Cble Dt Rte: Downlink: 90Mbps(Mx.) Uplink: 90Mbps(Mx.) Technology: Power Line Communiction(PLC) nvironmentl Operting Temperture: -10 C to 60 C (14 F to 140 F) Storge Temperture: -20 C to 70 C (-4 F to 158 F) Reltive Humidity: 5% to 95% non-condensing lectricl nd Mechnicl Input Power: 12VDC (Terminl Block) Power Consumption: 8W Mx. Protection: Reverse Polrity: Present Power Input Overlod: Present LD Indictors: Power: Power Sttus : LINK/ACT UTP Dt: SPD(Trnsmitter) / RADY(Receiver) ACT Dimensions (WxDxH): 114 x 72 x 31 mm Weight: 0.2Kg Csing: Mini Aluminum cse Mounting Options: Wll Mount Regultory Approvls ISO9001 FCC Prt 15, Clss A N55022:2006+A1: 2007 Surge Protection RJ45: 1kV Power: 0.5kV UTP: 2kV xtension OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 21

22 T1100UPp Series Industril 10/100BAS-TX over UTP xtender with Po+ & PoW 1 UTP 1 Po + PoW xtension Fetures Generl Po+(30W) nd Power over Wire 802.f/802.3t Complint Dt Rte up to: 90Mbps(Downlink), 90Mbps (Uplink) Mx. Distnce: 600m over Ct5e cble. Support DIN-Ril instlltion -10ºC to 60ºC (14ºF to 140ºF) operting temperture Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T1100UPp-T T1100UPp-R Trnsmitter of 10/100BAS-TX over UTP with Po+ & PoW Receiver of 10/100BAS-TX over UTP with Po+ & PoW Mounting Options Power Options n Defult Wll Mount built-in. n GS60A48 60W/1.25A 48VDC Power Supply. Open wire for Terminl Block. n Power Supply is to be purchsed seprtely. NOTS: (1) Trnsmission distnce my vries with qulity nd mteril of Ct5/UTP Cble. Typicl Appliction UTP T1100UPp-T UTP T1100UPp-R UTP Po IP Cmer Po Up to 600m DC 48V Power Supply Network Switch 22

23 Accessories T1100UPp Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX I802.3f Power over I802.3t Power over : Connector: 1xRJ45 Cbling: Ct5 or bove Mximum Distnce: 100m UTP: Cbling: Ct5 or bove Connector: 1xRJ45 Distnce: Up to 600m on Ct5 Cble Dt Rte: Downlink: 90Mbps(Mx.) Uplink: 90Mbps(Mx.) Technology: Power Line Communiction(PLC) nvironmentl Operting Temperture: -10 C to 60 C (14 F to 140 F) Storge Temperture: -20 C to 70 C (-4 F to 158 F) Reltive Humidity: 5% to 95% non-condensing Regultory Approvls ISO9001 FCC Prt 15, Clss A N55022:2006+A1: 2007 Surge Protection RJ45: 1KV Power: 0.5KV UTP: 2kV lectricl nd Mechnicl Input Power: 48VDC (Terminl block) Power Consumption: 8W Mx. (PoW not in use) 60W Mx.(PoW in use) Protection: Reverse Polrity: Present Power Input Overlod: Automtic Resettble LD Indictors: Power: Power Sttus : SPD, LINK/ACT, Po(Trnsmitter) UTP Dt: LINK(Trnsmitter) / RADY(Receiver) PoW(Receiver) ACT Po: Stndrd: I802.3t Port: RJ45 Mx. Power: 30W Mx. (Alterntive B mode) Dimensions (WxDxH): 114 x 72 x 31 mm Weight: 0.25Kg Csing: Mini Aluminum cse Mounting Options: Wll Mount xtension OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 23

24 T1111 Series Industril 10/100BAS-TX to 100BAS-FX Medi Converter 1 F 1 Fetures Accessories Medi Converter Generl Converts 10/100BAS-TX to 100BAS-FX Full/Hlf duplex, Auto-Negotition Singlemode or Multimode fiber opertion Single or Dul-core fiber with SC or ST connectors MDI/MDI-X Auto-Crossover supported Sleek Microtype design, fits within most cmer housing Plug-nd-Ply 12VDC or 24VAC Terminl Block Power inputs -10 C to 60 C (14 F to 140 F) operting temperture Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T1111-X-MT Microtype 10/100BAS-TX to 100BAS-FX Medi Converter (X) = Fiber Options Wvelengths Link Budget Mx. Distnce A Multimode/2-fiber/SC 1310nm 14dB 2km B Singlemode/2-fiber/SC 1310nm 21dB 20km C Multimode/WDM 1-fiber/SC TX:1310nm/RX:1550nm 21dB 2km D Multimode/WDM 1-fiber/SC TX:1550nm/RX:1310nm 21dB 2km Singlemode/WDM 1-fiber/SC TX:1310nm/RX:1550nm 19dB 20km F Singlemode/WDM 1-fiber/SC TX:1550nm/RX:1310nm 19dB 20km G Multimode/2-fiber/ST 1310nm 14dB 2km H Singlemode/2-fiber/ST 1310nm 21dB 20km I Multimode/WDM 1-fiber/ST TX:1310nm/RX:1550nm 21dB 2km J Multimode/WDM 1-fiber/ST TX:1550nm/RX:1310nm 21dB 2km K Singlemode/WDM 1-fiber/ST TX:1310nm/RX:1550nm 19dB 20km L Singlemode/WDM 1-fiber/ST TX:1550nm/RX:1310nm 19dB 20km Mounting Options Power Options n Built-in Wll Mount Brcket. n Rck-mountble on 1U rck MR-C10 (Purchse Seprtely). n T-PA/12V 1.25A 12VDC Power Adptor. Open wire for Terminl Block. n Power Adptor is included for ll sles. NOTS: (1) Trnsmission distnce will suffer if dditionl losses re introduced by the opticl connectors, fusions, splices nd the fibers within the network. (2) Operting distnce of multimode is limited by the chrcteristics of the fiber bndwidth. (3) Plese feel free to consult fctory for ny specil requirement nd customiztion 24

25 Accessories T1111 Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX/FX I802.3x Flow Control Processing Type: Store nd forwrd Hlf-duplex, Full-duplex Forwrd Filter Rte: 14,880pps (10Mbps) 148,800pps (100Mbps) Cbling: 10BAS-T: Ct5 or bove 100BAS-TX: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 1 x RJ45 Address Tble Size: 2048 MAC Addresses Opticl Cbling: 62.5/125µm (Multimode) 9/125µm (Singlemode) Mximum Distnce: 2km (Multimode) 20km (Singlemode) Wvelength: 1310 nm 1310/1550nm Connector: SC/ST nvironmentl Operting Temperture: -10 C to 60 C (14 F to 140 F) Storge Temperture: -25 C to 85 C (-13 F to 185 F) Reltive Humidity: 0% to 95% non-condensing lectricl nd Mechnicl Input Power: 12VDC or 24VAC (Terminl Block) Power Consumption: 2.4W Mx. 0.2A@12VDC LD Indictors: Power: Power Sttus 10/100TX(Per Port): Link/Activity, Speed 100FX(Per Port): Link/Activity Dimensions (WxDxH): 36.2 x 98 x 24.5 mm Weight: 0.12Kg (0.22Kg with PA) Csing: Aluminum cse Mounting Options: Wll-mount / MR-C10 1U Rck Regultory Approvls ISO9001 FCC Prt 15, Clss A N55022:2006+A1: 2007 Clss A N : 2006 N : 2008 N 55024: A1: A2: 2003 Medi Converter Typicl Appliction UTP T1111-X-MT T1111-X-MT UTP 1 fiber IP Cmer Unit: mm OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 25

26 T1111P-X-MT Series Industril 10/100BAS-TX to 100BAS-FX Medi Converter with Po/PS 1 F 1 Po Fetures Medi Converter Ordering Informtion Generl Complies with 802.3f Po/PS stndrd (15.4W) 10/100Mbps-Full/Hlf-duplex, Auto-negotition, Auto MDI/MDI-X Full wire-speed forwrding rte 128K bits buffer memory Aluminum cse Support Wll-mount instlltion -10ºC to 60ºC (14ºF to 140ºF) operting temperture Wrrnty 5-Yer Wrrnty Model Description T1111P-X-MT 10/100BAS-TX to 100BAS-FX Medi Converter with Po/PS (X) = Fiber Options Wvelengths Link Budget Mx. Distnce A Multimode/2-fiber/SC 1310nm 11dB 2km B Singlemode/2-fiber/SC 1310nm 17dB 20km C Multimode/WDM 1-fiber/SC TX:1310nm/RX:1550nm 8dB 2km Singlemode/WDM 1-fiber/SC TX:1310nm/RX:1550nm 17dB 20km G Multimode/2-fiber/ST 1310nm 11dB 2km H Singlemode/2-fiber/ST 1310nm 17dB 20km I Multimode/WDM 1-fiber/ST TX:1310nm/RX:1550nm 8dB 2km K Singlemode/WDM 1-fiber/ST TX:1310nm/RX:1550nm 17dB 20km Power Options n GS60A48 60W/1.25A 48VDC Power Supply. Open wire for Terminl Block. n Power Supply is to be purchsed seprtely. NOTS: (1) Trnsmission distnce will suffer if dditionl losses re introduced by the opticl connectors, fusions, splices nd the fibers within the network. (2) Operting distnce of multimode is limited by the chrcteristics of the fiber bndwidth. 26

27 Accessories T1111P-X-MT Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX/FX I802.3f Power over Pcket Buffer Memory: 128K bits Processing Type: Store nd forwrd Forwrd Filter Rte: 14,880pps (10Mbps) 148,810pps (100Mbps) Cbling: 10BAS-T: Ct5 or bove 100BAS-TX: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 1 x RJ45 Opticl Cbling: 62.5/125µm (Multimode) 9/125µm (Singlemode) Mximum Distnce: 2km (Multimode) 20km (Singlemode) Wvelength: 1310 nm 1310/1550nm Connector: SC/ST nvironmentl Operting Temperture: -10 C to 60 C (14 F to 140 F) Storge Temperture: -20 C to 70 C (-4 F to 158 F) Reltive Humidity: 5% to 95% non-condensing lectricl nd Mechnicl Input Power: 48VDC (2 pin terminl block) Power Consumption: 19.2W, 0.4A@48VDC (Po in use) 2.4W, Mx. 0.05A@48VDC (Po not in use) Protection: Overlod: Present Over Voltge: Present LD Indictors: Power: Power Sttus 10/100TX(Per Port): Link/Activity, Speed 100FX(Per Port): Link/Activity Po: PD connect/ PD detection/ PD disconnect Po: Stndrd: I802.3f Port: RJ45 Mx. Power: 15.4W Mx (Alterntive A mode) Dimensions (WxDxH): 83 x 70 x 23.6 mm Weight: 0.2Kg Csing: Aluminum cse Mounting Options: Wll-mount Regultory Approvls ISO9001 FCC Prt 15, Clss A N55022:2006+A1: 2007 Medi Converter Typicl Appliction UTP T1111P-X-MT T1111-X-MT UTP Po 1 fiber Po IP Cmer DC 48V Power Supply OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 27

28 T1111H Series Hrdened 100BAS-TX to 100BAS SFP Medi Converter 1 SFP 1 Hrdened Fetures Medi Converter Generl Converts 100BAS-TX to 100BAS SFP Supports Full/Hlf duplex Supports externl SFP Supports Auto MDI/MDI-X Sleek Microtype design, fits within most cmer housing xtensive LD indictors for network dignostics nvironmentlly hrdened -40 C to 75 C (-40 F to 167 F) operting temperture Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T1111H-S-MT Hrdened Microtype 100BAS-TX to 100BAS SFP Medi Converter SFP Options Mounting Options Power Options n (S) = SFP option. Plese select your SFP on our SFP Options pge. n SFP module is to be purchsed seprtely. n Built-in Wll Mount Brcket. n Rck-mountble on 1U rck MR-C10 (Purchse Seprtely). n T-PA/12V 1.25A 12VDC Power Adptor. Open wire for Terminl Block. n Power Adptor is included for ll sles. Typicl Appliction UTP T1111H-S-MT T1111H-S-MT UTP 1 fiber IP Cmer 28

29 Accessories T1111H Series Specifictions Stndrds: I802.3u 100BAS-TX/FX I802.3x Flow Control Processing Type: Forwrd Forwrd Filter Rte: 148,800pps (100Mbps) Cbling: 100BAS-TX: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 1 x RJ45 Opticl Port: 1 x SFP 100BAS-FX nvironmentl Operting Temperture: -40 C to 75 C (-40 F to 167 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 5% to 95% non-condensing lectricl nd Mechnicl Input Power: 12VDC (Terminl Block) Power Consumption: 2.4W Mx. 0.2A@12VDC LD Indictors: Power: Power Sttus 100TX: Link/Activity, Speed SFP: Link/Activity Dimensions (WxDxH): 36.2 x 117 x 24.5 mm Weight: 0.15Kg Csing: Metl Cse Mounting Options: Wll-mount / MR-C10 1U Rck Regultory Approvls ISO9001 FCC Prt 15, Clss A N55022:2006+A1: 2007 Clss A Surge Protection: RJ45: 1kV Power: 500V SD: 4kV/8kV Medi Converter OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 29

30 T1212H Series Hrdened 1000BAS-T to 1000BAS SFP Medi Converter 1 SFP 1 1G Hrdened Fetures Medi Converter Generl Converts 1000BAS-T to 1000BAS SFP Supports Full/Hlf duplex Supports externl 1000BAS SFP Supports Auto MDI/MDI-X Sleek Microtype design, fits within most cmer housing xtensive LD indictors for network dignostics nvironmentlly hrdened -40 C to 75 C (-40 F to 167 F) operting temperture Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T1212H-S-MT Hrdened Microtype 1000BAS-T to 1000BAS SFP Medi Converter SFP Options Mounting Options Power Options n (S) = SFP option. Plese select your SFP on our SFP Options pge. n SFP module is to be purchsed seprtely. n Built-in Wll Mount Brcket. n Rck-mountble on 1U rck MR-C10 (Purchse Seprtely). n T-PA/12V 1.25A 12VDC Power Adptor. Open wire for Terminl Block. n Power Adptor is included for ll sles. Typicl Appliction UTP T1212H-S-MT T1212H-S-MT UTP 1 fiber IP Cmer 30

31 Accessories T1212H Series Specifictions Stndrds: I802.3b 1000BAS-T I802.3z Gigbit Fiber I802.3X Flow Control Processing Type: Forwrd Forwrd Filter Rte: 1,488,000pps (1000Mbps) Cbling: 1000BAS-T: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 1 x RJ45 Opticl Port: 1 x SFP 1000BAS-X nvironmentl Operting Temperture: -40 C to 75 C (-40 F to 167 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 5% to 95% non-condensing lectricl nd Mechnicl Input Power: 12VDC (Terminl Block) Power Consumption: 2.4W Mx. 0.2A@12VDC LD Indictors: Power: Power Sttus 1000TX: Link/Activity, Speed SFP: Link/Activity Dimensions (WxDxH): 36.2 x 117 x 24.5 mm Weight: 0.15Kg Csing: Metl Cse Mounting Options: Wll-mount / MR-C10 1U Rck Regultory Approvls ISO9001 FCC Prt 15, Clss A N55022:2006+A1: 2007 Clss A Surge Protection: RJ45:1kV Power: 500V SD: 4kV/8kV Medi Converter OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 31

32 T1111PpH Series Hrdened 100BAS-TX to 100BAS SFP Medi Converter with Po+ 1 SFP 1 Po + Hrdened Fetures Medi Converter Generl Converts 100BAS-TX to 100BAS SFP Supports I802.3t Po+(30W) Supports Full/Hlf duplex Supports externl 100BAS SFP Supports Auto MDI/MDI-X Supports DIN-Ril & Wll-mount instlltion xtensive LD indictors for network dignostics nvironmentlly hrdened -40 C to 75 C (-40 F to 167 F) operting temperture Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T1111PpH-S-DR Hrdened 100BAS-TX to 100BAS SFP Medi Converter with Po+ SFP Options Mounting Options Power Options n (S) = SFP option. Plese select your SFP on our SFP Options Pge. n SFP module is to be purchsed seprtely. n Defult DIN-Ril Brcket instlled, Wll Mount Brcket is included. n GS60A48 60W/1.25A 48VDC Power Supply. Open Wire for Terminl Block. n Power Supply is to be purchsed seprtely. Typicl Appliction UTP T1111PpH-S-DR T1111H-S-MT UTP 1 fiber IP Cmer DC 48V Power Supply 32

33 Accessories T1111PpH Series Specifictions Stndrds: I802.3u 100BAS-TX/FX I802.3f Power over I802.3t Power over I802.3x Flow Control Processing Type: Forwrd Forwrd Filter Rte: 148,800pps (100Mbps) Cbling: 100BAS-TX: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 1 x RJ45 Opticl Port: 1 x SFP 100BAS-FX nvironmentl Operting Temperture: -40 C to 75 C (-40 F to 167 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 5% to 95% non-condensing lectricl nd Mechnicl Input Power: 48VDC (Terminl Block) Power Consumption: 36W Mx. 0.75A@48VDC Po: Stndrd: I802.3t Port: RJ45 Mx. Power: 30W Mx per port (Alterntive B Mode) LD Indictors: Power: Power Sttus 100TX: Link/Activity, Speed SFP: Link/Activity Dimensions (WxDxH): 96 x 80 x 31 mm Weight: 0.25Kg Csing: Metl Cse Mounting Options: DIN-Ril / Wll-mount Regultory Approvls ISO9001 FCC Prt 15, Clss A N55022:2006+A1: 2007 Clss A Surge Protection RJ45: 1kV Power: 500V SD : 4kV / 8kV Medi Converter OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 33

34 T1212PpH Series Hrdened 1000BAS-T to 1000BAS SFP Medi Converter with Po+ 1 SFP 1 Po + 1G Hrdened Fetures Medi Converter Generl Converts 1000BAS-T to 1000BAS SFP Supports I802.3t Po+(30W) Supports Full/Hlf duplex Supports externl 1000BAS SFP Supports Auto MDI/MDI-X Supports DIN-Ril & Wll-mount instlltion xtensive LD indictors for network dignostics nvironmentlly hrdened -40 C to 75 C (-40 F to 167 F) operting temperture Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T1212PpH-S-DR Hrdened 1000BAS-T to 1000BAS SFP Medi Converter with Po+ SFP Options Mounting Options Power Options n (S) = SFP option. Plese select your SFP on our SFP Options Pge. n SFP module is to be purchsed seprtely. n Defult DIN-Ril Brcket instlled, Wll Mount Brcket is included. n GS60A48 60W/1.25A 48VDC Power Supply. Open Wire for Terminl Block. n Power Supply is to be purchsed seprtely. Typicl Appliction UTP T1212PpH-S-DR T1212H-S-MT UTP 1 fiber IP Cmer DC 48V Power Supply 34

35 Accessories T1212PpH Series Specifictions Stndrds: I802.3b 1000BAS-T I802.3z Gigbit Fiber I802.3f Power over I802.3t Power over I802.3x Flow Control Processing Type: Forwrd Hlf-duplex, Full-duplex Forwrd Filter Rte: 1,488,000pps (1000Mbps) Cbling: 1000BAS-T: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 1 x RJ45 Opticl Port: 1 x SFP 1000BAS-X nvironmentl Operting Temperture: -40 C to 75 C (-40 F to 167 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 5% to 95% non-condensing lectricl nd Mechnicl Input Power: 48VDC (Terminl Block) Power Consumption: 36W Mx. 0.75A@48VDC Po: Stndrd: I802.3t Port: RJ45 Mx. Power per Port: 30W Mx per port (Alterntive B Mode) LD Indictors: Power: Power Sttus 1000TX: Link/Activity, Speed SFP: Link/Activity Dimensions (WxDxH): 96 x 80 x 31 mm Weight: 0.25Kg Csing: Metl Cse Mounting Options: DIN-Ril / Wll-mount Regultory Approvls ISO9001 FCC Prt 15, Clss A N55022:2006+A1: 2007 Clss A Surge Protection: RJ45: 1kV Power: 500V SD: 4kV/8kV Medi Converter OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 35

36 T8181/T Series Rck-mount 8/16-port 10/100BAS-TX to 8/16-port 100BAS SFP Medi Converter 8 or SFP8 or Fetures Generl 19 1U Rck-mount Converts 10/100BAS-TX to 100BAS SFP Supports Full/Hlf duplex, Auto Negotition Supports Auto MDI/MDI-X Supports externl 100BAS SFP AC Power input -10 C to 60 C (14 F to 140 F) operting temperture Medi Converter Ordering Informtion Wrrnty 5-Yer Wrrnty Model Description T8181-S T S Rck-mount 8-port 10/100BAS-TX to 8-port 100BAS SFP Medi Converter Rck-mount 16-port 10/100BAS-TX to 16-port 100BAS SFP Medi Converter SFP Options Mounting Options Power Options n (S) = SFP option. Plese select your SFP on our SFP Options Pge. n SFP module is to be purchsed seprtely. n 19 1U Rck Mount. n 100~240VAC input. NOTS: (1) Plese feel free to consult fctory for ny specil requirement nd customiztion 36

37 Medi Converter Accessories T8181/T Series Specifictions Stndrds: Processing Type: Forwrd Filter Rte: Cbling: Pcket Buffer Memory: 128K bits Mx Pcket Length: Interfce Connector: 10/100TX: 100FX: LD Indictors: Power: 10/100TX(Per Port): 100FX(Per Port): I BAS-T I802.3u 100BAS-TX/FX Converter mode 14,880pps (10Mbps) 148,800pps (100Mbps) 10BAS-T: Ct5 or bove 100BAS-TX: Ct5 or bove 1600 Bytes #1 #2 8 /16 x RJ45 #1 #2 8 /16 x SFP Power Sttus Link/Activity, Speed Link lectricl nd Mechnicl Input Power: Power Consumption: Dimensions (WxDxH): Weight: Csing: Mounting Options: nvironmentl Operting Temperture: Storge Temperture: Reltive Humidity: 100~240VAC, 50/60Hz #1 #2 100mA / 433 x 250 x 44 mm #1 #2 1.5 /2 Kg Metl cse Rck Mount Regultory Approvls ISO9001 FCC Prt 15, Clss A N55022 Clss A Surge Protection: RJ45: 1kV Power: 0.5kV #1 T8181 Series #2 T Series -10 C to 60 C (14 F to 140 F) -20 C to 70 C (-4 F to 158 F) 0% to 95% (non-condensing) OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 37

38 T4222PpH Series Self-Configured Hrdened 4-port 10/100/1000BAS-T + 2-port 1000BAS SFP Switch with Po+ 4 Po 2 + 1G SFP Hrdened Fetures Network Switches Ordering Informtion Generl Automticlly support IGMP (Multicsting) Supports 10/100/1000Mbps-Full/Hlf-duplex, Auto-negotition, Auto MDI/MDI-X Supports externl 1000BAS SFP Supports Disy-Chin connection Supports I 802.3t Po+(30W per port) Supports Light Hrdwre IGMP V1, V2, V3 Supports Brodcst Storm Control Supports Rely output for power filure 1M bits frme buffer memory Supports 9K Bytes Jumbo Frme Supports nergy fficient I802.3z Redundnt Power Inputs Supports Wll-mount nd DIN-Ril instlltion nvironmentlly hrdened -40 C to 75 C ( -40 F to 167 F) operting temperture Wrrnty 5-Yer Wrrnty Model Description T4222PpH-S-DR Self-configured Hrdened 4-Port 10/100/1000BAS-T + 2-Port 1000BAS SFP Switch with Po+ SFP Options Mounting Options Power Options n (S) = SFP option. Plese select your SFP option on our SFP Option pge. n SFP module is to be purchsed seprtely. n Defult DIN-Ril Brcket instlled, Wll Mount Brcket is included. n DR W/2.5A 48VDC DIN-Ril Power Supply. Open Wire for Terminl Block. n DRP W/5A 48VDC DIN-Ril Power Supply. Open Wire for Terminl Block. n GS120A48 120W/2.5A 48VDC Power Supply. Open Wire for Terminl Block. n GS220A48 220W/4.6A 48VDC Power Supply. Open Wire for Terminl Block. n Power Supply is to be purchsed seprtely. 38

39 T4222PpH Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX/FX I802.3b 1000BAS-T I802.3z 1000BAS-X I802.3f Power over I802.3t Power over Forwrd & Filtering Rte: 14,880pps (10Mbps) 148,800pps (100Mbps) 1,488,000pps (1000Mbps) Pcket Buffer Memory: 1M bits Processing Type: Store-nd-Forwrd Mx Pcket Length: 9K Bytes Jumbo Frme Address Tble Size: 2048 MAC Addresses Connector: 4 x RJ45 Opticl Port: 2 x SFP 1000BAS-X Regultory Approvls ISO9001 N55022 Clss A, FCC prt 15 Clss A Surge Protection: RJ-45: 1kV Power: 500V lectricl nd Mechnicl Input Power: 2 x 48~57 VDC (Terminl Block) Power Consumption: 135W Mx. 2.8A@48VDC (Po in use) 5W Mx. 0.1A@48VDC (Po not in use) Po: Stndrd: I802.3t Port: RJ45 Port 1 ~ Port 4 Mx. Power per Port: 30W Mx per port (Alterntive B mode) Protection: Power Input Overlod: Automtic Resettble Reverse Polrity: Present LD Indictors: Power: Power Sttus (Per Port): Link/Activity SFP: Link/Activity Dimensions (WxDxH): 148 x 120 x 31mm Weight: 0.5Kg Csing: Metl Cse Mounting Options: DIN-Ril / Wll Mount nvironmentl Operting Temperture: -40 C to 75 C (-40 F to 167 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 5% to 95% non-condensing Network Switches OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 39

40 T2111 Series Unmnged Industril 2-port 10/100BAS-TX + 1-port 100BAS-FX Switch 2 F 1 Fetures Generl Converts 10/100BAS-TX to 100BAS-FX Full/Hlf deplex, Auto-Negotition Singlemode or Multimode fiber opertion Single or Dul-core fiber with SC or ST connectors Store nd forwrd switching mechnism MDI/MDI-X Auto-Crossover supported Plug-nd-Ply Wll-mount or operte in T-C12 rck mount chssis -20ºC to 60ºC (-4ºF to 140ºF) operting temperture Wrrnty 5-Yer Wrrnty Network Switches Ordering Informtion Model Description T2111-X-YY 2-port 10/100BAS-TX + 1-port 100BAS-FX Switch (X) = Fiber Options Wvelengths Link Budget A Multimode/2-fiber/SC 1310nm 14dB Mx. Distnce 2km B Singlemode/2-fiber/SC 1310nm 21dB 20km C Multimode/WDM 1-fiber/SC TX:1310nm/RX:1550nm 21dB 2km D Multimode/WDM 1-fiber/SC TX:1550nm/RX:1310nm 21dB 2km Singlemode/WDM 1-fiber/SC TX:1310nm/RX:1550nm 19dB 20km F Singlemode/WDM 1-fiber/SC TX:1550nm/RX:1310nm 19dB 20km G Multimode/2-fiber/ST 1310nm 14dB 2km H Singlemode/2-fiber/ST 1310nm 21dB 20km I Multimode/WDM 1-fiber/ST TX:1310nm/RX:1550nm 21dB 2km J Multimode/WDM 1-fiber/ST TX:1550nm/RX:1310nm 21dB 2km K Singlemode/WDM 1-fiber/ST TX:1310nm/RX:1550nm 19dB 20km L Singlemode/WDM 1-fiber/ST TX:1550nm/RX:1310nm 19dB 20km (YY) = Instlltion SA Stndlone Wll-Mount CM Crd Module Power Options n T-PA/12V 1.25A 12VDC Power Adptor. DC Jck. n Power Adptor is included for ll sles. n For CM Model, power from T-C12 Chssis. NOTS: (1) Trnsmission distnce will suffer if dditionl losses re introduced by the opticl connectors, fusions, splices nd the fibers within the network. (2) Operting distnce of multimode is limited by the chrcteristics of the fiber bndwidth. (3) Plese feel free to consult fctory for ny specil requirement nd customiztion 40

41 T2111 Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX/FX I802.3x Flow Control Processing Type: Store nd forwrd Hlf-duplex, Full-duplex Forwrd Filter Rte: 14,880pps (10Mbps) 148,800pps (100Mbps) Cbling: 10BAS-T: Ct5 or bove 100BAS-TX: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 2 x RJ45 Address Tble Size: 2048 MAC Addresses Opticl Cbling: 62.5/125µm (Multimode) 9/125µm (Singlemode) Mximum Distnce: 2km (Multimode) 20km (Singlemode) Wvelength: 1310 nm 1310/1550nm Connector: SC/ST lectricl nd Mechnicl Input Power: 12VDC (DC Jck) Power Consumption: 2.4W Mx. 0.21A@12VDC LD Indictors: Power: Power Sttus 10/100TX(Per Port): Link/Activity, Speed 100FX(Per Port): Link/Activity Dimensions (WxDxH): Stndlone 122 x 30 x 103 mm Crd Module 130 x 31 x 111 mm Weight: Stndlone 0.33Kg (0.43Kg with PA) Crd Module 0.33Kg Csing: Aluminum cse Mounting Options: Wll-mount/T-C12 Rck Mount Regultory Approvls ISO9001 FCC Clss A N55022:2006 Clss A N 55024: A1: A2:2003 nvironmentl Operting Temperture: Storge Temperture: Reltive Humidity: -20 C to 60 C (-4 F to 140 F) -40 C to 85 C (-40 F to 185 F) 0% to 95% non-condensing Unit: mm Network Switches OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 41

42 T4111Pp Series Unmnged Industril 4-port 10/100BAS-TX + 1-port 100BAS SFP Switch with Po+ 4 Po + SFP 1 Fetures Generl Supports I802.3t Po+(30W per port) Supports externl 100BAS SFP Supports Auto-Negotition nd Auto MDI/MDI-X Supports Store-nd-Forwrd Trnsmission Support DIN-Ril & Wll-mount instlltion -10 C to 60 C (14 F to 140 F) operting temperture Wrrnty 5-Yer Wrrnty Network Switches Ordering Informtion Model T4111Pp-S-DR SFP Options Mounting Options Power Options Description 4-port 10/100BAS-TX + 1-port 100BAS SFP Switch with Po+ n (S) = SFP option. Plese select your SFP on our SFP Option pge. n SFP module is to be purchsed seprtely. n Defult DIN-Ril Brcket instlled, Wll Mount Brcket is included. n DR W/2.5A DIN-Ril 48VDC Power Supply. Open Wire for Terminl Block. n DRP W/5A DIN-Ril 48VDC Power Supply. Open Wire for Terminl Block. n GS120A48 120W/2.5A 48VDC Power Supply. Open wire for Terminl Block. n GS220A48 220W/4.6A 48VDC Power Supply. Open wire for Terminl Block. n Power Supply is to be purchsed seprtely. 42

43 T4111Pp Series Specifictions Stndrds: I Bse-T I802.3u 100Bse-TX/FX I802.3x Flow Control I802.3f Power over I802.3t Power over Pcket Buffer Memory: 512K bits Processing Type: Store-nd-forwrd Hlf-duplex bck-pressure nd I802.3x Full-duplex flow control Forwrd Filter Rte: 14,880pps (10Mbps) 148,800pps (100Mbps) Cbling: 10BAS-T: Ct5 or bove 100BAS-TX: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 4 x RJ45 Address Tble Size: 1024 MAC Addresses nvironmentl Operting Temperture: -10 C to 60 C (14 F to 140 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 5% to 95% non-condensing lectricl nd Mechnicl Input Power: 48V~57VDC (Terminl Block) Power Consumption: 130W Mx. 2.7A@48VDC (Po in use) 5W Mx. 0.1A@48VDC (Po not in use) Po: Stndrd: I802.3t Port: RJ-45 Port 1 ~ Port 4 Mode: Alterntive B Mode Positive (VCC+): RJ45 Pin4, 5 Negtive (VCC-): RJ45 Pin7, 8 Mx. Power per port: 30W per Port for PS Protection: Overlod: Present Reverse Polrity: Present LD Indictors: Power: PWR (Power Sttus) 10/100TX(Per Port): Link/Activity, Po SFP: Link/Activity Dimensions (WxDxH): 136 x x 29.5 mm Weight: 0.5Kg Csing: Metl Mounting Options: DIN-Ril /Wll-mount Regultory Approvls ISO9001 FCC Prt 15, Clss A N55022 Clss A N (Surge Stndrds) RJ45: 1kV Power: 500V Network Switches OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 43

44 T8122P Series Unmnged Industril 8-port 10/100BAS-TX + 2-port 10/100/1000BAS-T or 100/1000M SFP Combo Switch with Po 8 Po SFP 2 1G Fetures Generl RJ-45 Port Support Auto MDI/MDI-X Function Supports I802.3f Po(15.4W per port) SFP (Mini-GBIC) Supports 100/1000M Dul Mode Store nd Forwrd Switching Architecture Bck-Plne (Switching Fbric): 5.6Gbps 1Mbits Pcket Buffer 8K MAC Address Tble Redundnt Power Design Rely Output for Port Brekdown, Power Fil, nd Alrm IP30 Rugged Aluminum Cse Design DIN-Ril nd Pnel Mountble for sy Instlltion Wrrnty 5-Yer Wrrnty Network Switches Ordering Informtion Model T8122P-S-DR Description Unmnged Industril DIN-Ril 8-Port 10/100BAS-TX + 2-Port 10/100/1000BAS-T or 100/1000M SFP Combo with Po SFP Options Mounting Options Power Options n (S) = SFP option. Plese select your SFP on our SFP Options pge. n SFP module is to be purchsed seprtely. n Defult DIN-Ril Brcket instlled, Wll Mount Brcket is included. n DR W/2.5A 48VDC DIN-Ril Power Supply. Open Wire for Terminl Block. n DRP W/5A 48VDC DIN-Ril Power Supply. Open Wire for Terminl Block. n GS120A48 120W/2.5A 48VDC Power Supply. Open wire for Terminl block. n GS220A48 220W/4.6A 48VDC Power Supply. Open wire for Terminl block. n Power Supply is to be purchsed seprtely. 44

45 T8122P Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX I802.3b 1000BAS-T I802.3z Gigbit Fiber I 802.3x Flow Control I802.3f Power over Pcket Buffer Memory: 1 Mbits Processing Type: Store-nd-Forwrd Hlf-duplex bck-pressure & Full-duplex 802.3x flow control Switching Architecture: Bck-Plne: 5.6Gbps Switching Fbric Pcket Throughput Ability: 64bytes Full-Duplex Forwrd nd Filter Rte: 14,880pps (10Mbps) 148,800pps (100Mbps) 1,488,000pps (1000Mbps) Cbling: 10BAS-T: Ct3 or bove 100BAS-TX: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 10/100TX: 8 x RJ45 10/100/1000T/Mini- GBIC Combo: 2xRJ45 + 2x100/1000M SFP Sockets Address Tble Size: 8K MAC Addresses Regultory Approvls MI FCC Clss A, C N , N , N , N , N , N , N , N , N , N Sfety C N Stbility Testing Shock: IC Free Fll: IC Vibrtion: IC lectricl nd Mechnicl Input Power: 48VDC Redundnt Power (Terminl Block) Power Consumption: 16.8 W Mx. 350mA@48VDC Po: Power Budget: Wtts Mx. Stndrd: I802.3f Mode: Alterntive A Mode Positive (VCC+): RJ-45 Pin 1, 2 Negtive (VCC-): RJ-45 Pin 3, 6 Port: RJ45 Port 1 ~ Port 8 Mx. Power per Port: 15.4W Protection: Overlod Current: Present Reverse Polrity: Present Rely Alrm: Provides 1 Rely Output for Port Brekdown, Power Fil, nd Alrm Alrm Rely Current Crry Ability LD Indictors: Power: Power Sttus(PWR1, PWR2, Fult) (Per Port): Link/Activity, Full-Duplex/Collision, Power Feeding SFP: Link/Activity Dimensions (WxDxH): 72 x 105 x 152 mm Weight: 0.91 Kg Shipping Weight: 1.36 Kg Csing: IP30 Metl Cse Mounting Options: DIN-Ril / Wll Mount Unit: mm Network Switches nvironmentl Operting Temperture: Storge Temperture: Reltive Humidity: -10 C to 70 C (14 F to 158 F) -40 C to 85 C (-40 F to 185 F) 5% to 95% non-condensing OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 45

46 T24122Pp Series Unmnged Rck-mount 24-port 10/100BAS-TX + 2-port 10/100/1000BAS-T(X) or 1000M SFP Combo Switch with Po+/PS 24 Po + SFP 2 Fetures Generl RJ45 10/100Mbps-Full/Hlf-duplex, Auto negotition, Auto MDI/MDIX Combo RJ45 10/100/1000Mbps-Full/Hlf-duplex, Auto-negotition, Auto MDI/MDIX Supports externl 1000M SFP Supports 802.3x Flow control Supports 4K MAC ddress 2.75M bits frme buffer memory 19 1U Rck-mount AC power input 0 C to 50 C (32 F to 122 F) operting temperture Wrrnty 5-Yer Wrrnty Network Switches Ordering Informtion Model T24122Pp-S SFP Options Description Rck-mount 24-port 10/100BAS-TX + 2-port 10/100/1000BAS-T(X) or 1000M SFP Combo with Po+/PS n (S) = SFP option. Plese select your SFP on our SFP Option pge. n SFP module is to be purchsed seprtely. Mounting Options Power Options n 19 1U Rck Mount. n 100~240VAC input. 46

47 T24122Pp Series Specifictions Stndrds: I Bse-T I802.3u 100Bse-TX I802.3b 1000Bse-T I802.3z 1000Bse-X I802.3x Flow Control I802.3f Power over I802.3t Power over Pcket Buffer Memory: 2.75Mbits Processing Type: Store-nd-forwrd Forwrd Filter Rte: 14,880pps (10Mbps) 148,800pps (100Mbps) 1,488,000pps (1000Mbps) Mx. Pcket Length: 1536 Bytes Address Tble Size: 4K MAC Addresses Connector: 26 x RJ45 (24 x 10/100BAS-TX + 2 x 10/100/1000BAS-T(X)) Opticl Port: 2 x 1000M SFP lectricl nd Mechnicl Input Power: 100~240VAC, 50/60Hz Power Consumption: 0.56A@220VAC No-lod 2.8A@220VAC Full-lod Po: Stndrd: I802.3t Port: RJ45 Port 1 ~ Port 24 Mode: Alterntive B Mode Mx. Power per port: 30W per Port Power Budget: 450W (24 Port shre) LD Indictors: Power: PWR (Power Sttus) (Per Port): Link/Activity, Speed SFP(Per Port): Link/Activity Dimensions (WxDxH): 433 x 350 x 44 mm Weight: 4.2Kg Csing: Metl Cse Mounting Options: Rck Mount nvironmentl Regultory Approvls Operting Temperture: Storge Temperture: Reltive Humidity: 0 C to 50 C (32 F to 122 F) -10 C to 60 C (14 F to 140 F) 5% to 95% non-condensing ISO9001 FCC Prt 15, Clss A N55022:2006+A1:2007 Clss A Surge Protection: RJ45: 1kV Power: 500V SD: 4kV/8kV Network Switches OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 47

48 T22161 Series Unmnged Rck-mount 16-port 100M SFP + 2-port 10/100/1000BAS-TX Switch 2 SFP 16 1G Fetures Generl Supports 10/100/1000Mbps-Full/Hlf-duplex, Autonegotition, Auto MDI/MDI-X Supports externl 100M SFP Supports 802.3x Flow Control 8K MAC ddress 1Mbits buffer memory 19 1U Rck-mount AC power input 0 C to 50 C (32 F to 122 F) operting temperture Wrrnty 5-Yer Wrrnty Network Switches Ordering Informtion Model T22161-S SFP Options Mounting Options Power Options Description Unmnged Rck-mount 16-port 100M SFP + 2-port 10/100/1000BAS-TX Switch n (S) = SFP option. Plese select your SFP on our SFP Option pge. n SFP module is to be purchse seprtely. n 19 1U Rck Mount. n 100~240VAC input. 48

49 T22161 Series Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX/FX I802.3b 1000BAS-T I802.3x Flow Control Pcket Buffer Memory: 1M bits Processing Type: Store-nd-forwrd Forwrd Filter Rte: 14,880pps (10Mbps) 148,800pps (100Mbps) 1,488,000pps (1000Mbps) Mx. Pcket Length: 1522 Bytes Address Tble Size: 8K MAC Addresses Connector: 2 x RJ45 (10/100/1000BAS-TX) Opticl Port: 16 x 100M SFP Slots nvironmentl Operting Temperture: 0 C to 50 C (32 F to 122 F) Storge Temperture: -10 C to 60 C (14 F to 140 F) Reltive Humidity: 5% to 95% non-condensing lectricl nd Mechnicl Input Power: 100~240VAC, 50/60Hz Power Consumption: 210mA@220VAC LD Indictors: Power: PWR (Power Sttus) (Per Port): Link/Activity, Speed SFP (Per Port): Link/Activity Dimensions (WxDxH): 433 x 200 x 44 mm Weight: 1.7Kg Csing: Metl Cse Mounting Options: Rck Mount Regultory Approvls ISO9001 N55022:2006+A1: 2007 Clss A Surge Protection: RJ45: 1kV Power: 500V SD: 2kV/4kV Network Switches OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 49

50 T8122MPH Series Mnged Hrdened 8-port 10/100BAS-TX + 2-port 10/100/1000BAS-TX or 100/1000M SFP Combo Switch with Po/PS 8 Po SFP 2 1G Hrdened Fetures Generl Support I802.3f Po(15.4W per port) 5.6Gbps Bck-Plne (Switching Fbric) Ring Redundncy (Recovery Time < 20ms) I 802.1w Rpid Spnning Tree & I 802.1D Spnning Tree Protocol Supports Port Bsed VLAN & I 802.1Q Tg VLAN IGMP with Query Mode for Multi-Medi Applictions IP30 Rugged Aluminum Cse Design DIN-Ril nd Pnel Mountble for sy Instlltion Redundnt Power Design nvironmentlly hrdened -40 C to 80 C ( -40 F to 176 F) operting temperture Network Switches Ordering Informtion Model T8122MPH-S-DR SFP Options Description Wrrnty Mnged Hrdened DIN-Ril 8-Port 10/100BAS-TX + 2-Port 10/100/1000BAS-T or 100/1000M SFP Combo with Po/PS n (S) = SFP option. Plese select your SFP on our SFP Options pge. n SFP module is to be purchsed seprtely. 5-Yer Wrrnty Mounting Options Power Options n Defult DIN-Ril Brcket instlled, Wll Mount Brcket is included. n DR W/2.5A 48VDC DIN-Ril Power Supply. Open Wire for Terminl Block. n DRP W/5A 48VDC DIN-Ril Power Supply. Open Wire for Terminl Block. n GS120A48 120W/2.5A 48VDC Power Supply. Open Wire for Terminl Block. n GS220A48 220W/4.6A 48VDC Power Supply. Open Wire for Terminl Block. n Power Supply is to be purchsed seprtely. Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX/FX I802.3b 1000BAS-T I802.3z Gigbit Fiber I 802.3x Flow Control I802.3d Port Trunking with LACP I802.3f Power over I802.1D Spnning Tree I802.1w Rpid Spnning Tree I802.1p Clss of Service I802.1Q VLAN Tg Processing Type: Switching Architecture: Bck-Plne(Switching Fbric): Pcket Throughput Ability: Forwrd nd Filter Rte: Flsh ROM: DRAM: Store-nd-Forwrd 5.6Gbps 64bytes Full-Duplex 14,880pps (10Mbps) 148,800pps (100Mbps) 1,488,000pps (1000Mbps) 4 Mbytes 32 Mbytes I802.1x User Authentiction (RADIUS) Pcket Buffer Memory: 1 Mbits 50

51 T8122MPH Series Specifictions - Continue - Continue Cbling: 10BAS-T: 2-pir UTP/STP Ct. 3, 4, 5 cble IA/ TIA ohm (100m) 100BAS-TX: 2-pir UTP/STP Ct. 5 cble IA/TIA ohm (100m) Interfce: 10/100TX: 8xRJ45 with Auto MDI/ MDI-X Function Gigbit Fiber: 2xMini-GBIC Socket RS-232 Connector: RJ45 type lectricl nd Mechnicl Input Power: 48VDC Redundnt Power, Connective Removble Terminl Block for Mster & Slve Power Power Supply: Input Power Isoltion Design, Pss Hi-Pot Test ~ 1.5V Power Consumption: 10.7 W Mx. 223mA@48VDC (Power Device Not Included) Po: Power Budget: Wtts Mx. Stndrd: I802.3f Mode: Alterntive A Mode Positive (VCC+): RJ-45 Pin 1, 2 Negtive (VCC-): RJ-45 Pin 3, 6 Port: RJ45 Port 1 ~ Port 8 Mx. Power per Port: 15.4W Reverse Polrity: Present Alrm: Provides 1 Rely Output for Port Brekdown nd Power Fil LD Indictors: Power: Power Sttus(PWR1, PWR2, Fult) (Per Port): Link/Activity, Full-Duplex/Collision, Power Feeding SFP: Link/Activity Dimensions (WxDxH): 72 x 152 x 105 mm Weight: 0.91 Kg Shipping Weight: 1.36 Kg Csing: IP30 Metl Cse Mounting Options: DIN-Ril / Wll Mountble Regultory Approvls MI FCC Clss A, C N , N , N , N , N , N , N Sfety C N Stbility Testing Shock: IC Free Fll: IC Vibrtion: IC Softwre Fetures SNMP: Version: v1, v2c, v3 MIB: RFC2030 SNTP, RFC2821 SMTP, RFC1215 Trp, RFC2233 MIB II, RFC1157 SNMP MIB, RFC1493 Bridge MIB, RFC2674 VLAN MIB, RFC2665 Like MIB, RFC2819 RMON MIB, Privte MIB Trp: Up to 3 Trp Sttions Port Trunk with LACP: LACP Port Trunk: 4 Trunk Groups / Mx. 4 Trunk Members Redundnt Ring: Supports Redundnt Ring, Dul Homing nd Couple Ring Redundnt Bckup Feture nd Recovery Time < 20 ms Clss of Service(I802.1p): Provides 4 priority queues per port Qulity of Service: Port, Tg, IPv4 Type of Service, IPv4 / IPv6 Different Service IGMP: IGMP v1,v2 & Query Mode. Up to 256 Groups Spnning Tree: I802.1D Spnning Tree I802.1w Rpid Spnning Tree SNTP: Supports Simple Network Time Protocol SMTP: Supports Simple Mil Trnsfer Protocol (6 mil Accounts for Alerts) IP Security: Supports up to 10 IP Addresses for Secured Access System vent Log: Supports System Log Record nd Remote System Log Server Port Mirror: TX, RX, or Both Pckets Port Security: 100 MAC Address ntries for Sttic MAC nd 100 MAC Filters Login Security: I802.1x Authentiction/RADIUS DHCP: DHCP Client, DHCP Server, IP Rely Functions DNS: DNS Client Feture nd Primry & Secondry DNS Server Bndwidth Control: Supports Ingress nd gress pcket limit Firmwre Updte: Supports TFTP Firmwre Updte, Config. Bckup & Restore nvironmentl Operting Temperture: -40 C to 80 C (-40 F to 176 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 5% to 95% non-condensing Network Switches OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 51

52 T8242M Series Mnged Industril 8-port 10/100/1000BAS-TX or 100/1000M SFP Combo + 4-port 1000M SFP Switch 8 SFP 4 1G Fetures Generl Supports Jumbo Frme up to 9K Bytes Ring Redundncy (recovery time < 20ms over 250 units, MSTP/RSTP/STP (I 802.1s/w/D) for Redundncy Supports ACLs, 802.1x User Authentiction for Security Supports SNMP v1/v2c/v3, RMON & 802.1Q VLAN Network Mngement Supports DDM(Digitl Dignostic Monitoring) Function(P1~P8) Supports DOS/DDOS Auto Prevention IGMP v2/v3 (IGMP snooping support) for Filtering Multicst Trffic -10 C to 60 C ( 14 F to 140 F) operting temperture Network Switches Ordering Informtion Model T8242M-S-DR Description Wrrnty 5-Yer Wrrnty Mnged Industril 8-Port 10/100/1000BAS-TX or 100/1000M SFP Combo + 4-Port 1000M SFP Switch SFP Options Mounting Options Power Options n (S) = SFP option. Plese select your SFP on our SFP Options pge. n SFP module is to be purchsed seprtely. n Defult DIN-Ril Brcket instlled, Wll Mount Brcket is included. n GS60A48 60W/1.25A 48VDC Power Supply. Open Wire for Terminl Block. n Power Supply is to be purchsed seprtely. 52

53 T8242M Series Specifictions Stndrd: I802.3 for 10BAS-T I802.3u 100BAS-TX/FX I802.3z 1000BAS-X I802.3b 1000BAS-T I802.3x Flow Control I802.3d for LACP I802.1D Spnning Tree I802.1p Clss of Service I802.1Q VLAN Tg I802.1w Rpid Spnning Tree I802.1s Multiple Spnning Tree I802.1x User Authentiction I802.1b Link Lyer Discovery Processing Type: Store-nd-Forwrd Address Tble Size: 8K MAC Addresses Priority Queues: 4 Jumbo Frme: Up to 9K bytes Interfce: 10/100/1000Bse-X: 8 x RJ45 Gigbit Fiber: 4 x 1000BAS-X SFP Ports RS-232 Console 1 x RJ45 (Console Cble Included) lectricl nd Mechnicl Input Power: Dul 12~48VDC Redundnt Input Power Consumption: 22 Wtts Protection: Overlod Current: Present Reverse Polrity: Present on Terminl Block LD Indictors: Power: Power Sttus (PWR, PWR1, PWR2, Fult) Systems: Ring (Ring) Ring Mster (R.M) (Per Port): Link/Activity SFP(Per Port): Link/Activity Dimensions (WxDxH): 96.4 x x 154mm Weight: 1.42Kg Mounting Options: IP30 Metl Cse DIN-Ril/Wll Mountble Softwre Fetures Softwre Fetures: è STP/RSTP/MSTP (I802.1D/w/s) è Redundnt Ring with Recovery Time < 20ms over 250 Units è TOS/Diffserv Supported è Qulity of Service(802.1p) for Rel-Time Trffic è VLAN (802.1Q) with VLAN Tgging nd GVRP Supported è IGMP Snooping for Multicst Filtering è IP-Bsed Bndwidth Mngement è Appliction -Bsed QoS Mngement è DOS/DDOS Auto Prevention è Port Configurtion, Sttus, Sttistics, Monitoring, Security è DHCP Client/Server Security Fetures: è IP Police Security Feture è nble/disble Ports, MAC Bsed Port Security è Port Bsed Network Access Control(802.1x) è VLAN(802.1q) to Segregte nd Secure Network Trffic è RADIUS Centrlized Pssword Mngement è SNMP v3 ncrypted Authentiction nd Access Security nvironmentl Operting Temperture: -10 C to 60 C (14 F to 140 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 5% to 95% non-condensing Regultory Approvls MI FCC Prt 15, CISPR (N55022) Clss A MS N , N , N , N , N , N N Stbility Testing Shock: IC Free Fll: IC Vibrtion: IC Network Switches OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 53

54 T16122MH Series Mnged Hrdened16-port 10/100BAS-TX + 2-port 10/100/1000BAS-TX or 100/1000M SFP Combo Switch 16 SFP 2 1G Hrdened Fetures Generl 7.2Gbps Bck-Plne (Switching Fbric) Ring Redundncy (Recovery Time <20ms) I 802.1w Rpid Spnning Tree & I 802.1D Spnning Tree Protocol I 802.1p Clss of Service for Trffic Clssifiction & Prioritiztion Supports Port Bsed VLAN & I 802.1Q Tg VLAN IGMP with Query Mode for Multi-Medi Applictions Port Mirroring for Trffic Monitoring Redundnt Power Design nvironmentlly Hrdened -40 C to 80 C ( -40 F to 176 F) operting temperture Wrrnty 5-Yer Wrrnty Network Switches Ordering Informtion Model T16122MH-S-DR SFP Options Description Mnged Hrdened 16-Port 10/100BAS-TX + 2-Port 10/100/1000BAS-TX or 100/1000M SFP Combo Switch n (S) = SFP option. Plese select your SFP on our SFP Options pge. n SFP module is to be purchsed seprtely. Mounting Options Power Options n Defult DIN-Ril Brcket instlled, Wll Mount Brcket is included. n GS60A48 60W/1.25A 48VDC Power Supply. Open Wire for Terminl Block. n Power Supply is to be purchsed seprtely. Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX/FX I802.3b 1000BAS-T I802.3z Gigbit Fiber I 802.3x Flow Control I802.3d Port Trunking with LACP I802.1D Spnning Tree I802.1w Rpid Spnning Tree I802.1p Clss of Service I802.1Q VLAN Tg I802.1x User Authentiction (RADIUS) Pcket Buffer Memory: Processing Type: Switching Architecture: Bck-Plne: Pcket Throughput Ability: Forwrd nd Filter Rte: Flsh ROM: DRAM: Address Tble Size: 1 Mbits Hlf-duplex bck-pressure & Full-duplex 802.3x flow control 7.2Gbps Switching Fbric 64bytes Full-Duplex 14,880pps (10Mbps) 148,800pps (100Mbps) 1,488,000pps (1000Mbps) 4 Mbytes 32 Mbytes 8K MAC Addresses 54

55 T16122MH Series Specifictions - Continue - Continue Cbling: 10Bse-T 2-pir UTP/STP Ct.3,4,5 cble IA/ TIA ohm(100m) 100Bse-TX: 2-pir UTP/STP Ct.5 cble IA/TIA ohm(100m) Interfce: 10/100TX: 16 x RJ45 Gigbit Fiber: 2 x Mini-GBIC Combo Sockets RS-232 Console: 1 x RJ45(Console Cble Included) lectricl nd Mechnicl Input Power: 12~48VDC Redundnt Power, Connective Removble Terminl Power Consumption: 11.5 Wtts Protection: Reverse Polrity: Present Alrm: Present Provides 1 Rely Output for Port Brekdown nd Power Fil LD Indictors: Power: PWR, PWR1, PWR2, FAULT Systems: Ring Mster (R.M.) (Per Port): LNK/ACT, Full-Duplex/Collision SFP: LNK/ACT Dimensions (WxDxH): 72 x 152 x 105 mm Weight: 1 Kg Shipping Weight: 1.5 Kg Mounting Options: IP30 Metl Cse DIN-Ril / Wll Mountble Regultory Approvls MI FCC Clss A, C N , N , N , N , N , N , N , N , N , N Sfety C N Stbility Testing Shock: IC Free Fll: IC Vibrtion: IC Softwre Fetures SNMP: Version: v1, v2c, v3, Web, Telnet, CLI Mngement MIB: RFC 1215 Trp, RFC1213 MIB II, RFC1157 SNMP MIB, RFC1493 Bridge MIB, RFC2674 VLAN MIB, RFC1643, RFC1757 RSTP MIB, Privte MIB Trp: Up to 3 Trp Sttions Port Trunk with LACP: LACP Port Trunk: 4 Trunk Groups / Mx. 4 Trunk Members Redundnt Ring: Supports Redundnt Ring, Dul Homing nd Couple Ring Redundnt Bckup Feture nd Recovery Time < 20 ms Clss of Service(I802.1p): Provides 4 priority queues per port Qulity of Service: Port, Tg, IPv4 Type of Service, IPv4 / IPv6 Different Service IGMP: IGMP v1,v2 & Query Mode. Up to 256 Groups Spnning Tree: I802.1D Spnning Tree I802.1w Rpid Spnning Tree SNTP: Supports Simple Network Time Protocol SMTP: Supports Simple Mil Trnsfer Protocol (6 mil Accounts for Alerts) IP Security: Supports up to 10 IP Addresses System vent Log: Supports System Log Record nd Remote System Log Server Port Mirror: TX, RX, or Both Pckets Port Security: 100 MAC Address ntries for Sttic MAC nd 100 MAC Filters Login Security: I802.1x Authentiction/RADIUS DHCP: DHCP Client, DHCP Server Functions DNS: DNS Client Feture nd Primry & Secondry DNS Server Bndwidth Control: Ingress nd gress pcket limit Firmwre Updte: Supports TFTP Firmwre Updte, Config. Bckup & Restore nvironmentl Operting Temperture: -40 C to 80 C (-40 F to 176F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 5% to 95% non-condensing Network Switches OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 55

56 T24122M Series Mnged Rckmount 24-port 10/100BAS-TX + 2-port 10/100/1000BAS-TX or 1000M SFP Combo Switch 24 SFP 2 Fetures Generl Ring Redundncy (recovery time < 10ms over 250 units of Connection, MSTP/RSTP/STP (I 802.1w/D) for Redundncy Supports ACLs, 802.1x User Authentiction for Security Supports SNMP v1/v2c/v3, QoS, IGMP, RMON, & Port Bsed 802.1Q VLAN Web-bsed, Telnet, Console, CLI, nd Windows Utility Configurtion vent Notifiction Through Syslog, mil, SNMP Trp, nd Rely Output 19 Rck Mountble Supports AC nd Dul DC Power Inputs -10 C to 60 C ( 14 F to 140 F) operting temperture Network Switches Ordering Informtion Model T24122M-S Description Wrrnty 5-Yer Wrrnty Mnged Rckmount 24-Port 10/100BAS-TX + 2-Port 10/100/1000BAS-TX or 1000M SFP Combo Switch SFP Options Mounting Options Power Options n (S) = SFP option. Plese select your SFP on our SFP Options pge. n SFP module is to be purchsed seprtely. n 19 1U Rckmount. n 100~240VAC. n GS60A48 60W/1.25A 48VDC Power Supply. Open Wire for Terminl Block. n VDC Power Supply is to be purchsed seprtely. 56

57 T24122M Series Specifictions Stndrd: I802.3 for 10BAS-T I802.3u 100BAS-TX/FX I802.3b 1000BAS-T I802.3x Flow Control I802.3d for LACP I802.1D Spnning Tree I802.1p Clss of Service I802.1Q VLAN Tg I802.1w Rpid Spnning Tree I802.1s Multiple Spnning Tree I802.1x User Authentiction I802.1b Link Lyer Discovery Processing Type: Store-nd-Forwrd Hlf-duplex bck pressure & Full-duplex 802.3x flow control Forwrd nd Filter Rte: 14,880pps (10Mbps) 148,800pps (100Mbps) 1,488,000pps (1000Mbps) Address Tble Size: 8192 MAC Addresses Interfce: 10/100TX: 24 x RJ45 with Auto MDI/MDI-X Gigbit Fiber: 2 x Mini-GBIC Combo Sockets RS-232 Console 1 x Femle DB9 lectricl nd Mechnicl Input Power: 100~240VAC nd Dul 12~48VDC Redundnt Input Power Consumption: 18 Wtts Protection: Overlod Current: Present LD Indictors: Power: Power Sttus (PWR, P1, P2, P3, Fult) Systems: System Redy (Sttus) Ring (Ring) Ring Mster (M.Ring) (Per Port): Link/Activity SFP(Per Port): Link/Activity Dimensions (WxDxH): x 200 x 44mm Weight: 2.48Kg Mounting Options: Rckmount Softwre Fetures Softwre Fetures: è STP/RSTP/MSTP (I802.1D/w/s) è Redundnt Ring with Recovery Time < 10ms over 250 Units è TOS/Diffserv Supported è VLAN (802.1Q) with VLAN Tgging nd GVRP Supported è IGMP Snooping for Multicst Filtering è Port Configurtion, Sttus, Sttistics, Monitoring, Security Security Fetures: è nble/disble Ports, MAC Bsed Port Security è ACL Supported è Port Bsed Network Access Control è VLAN(802.1q) to Segregte nd Secure Network Trffic è RADIUS Centrlized Pssword Mngement è SNMP v3 ncrypted Authentiction nd Access Security nvironmentl Operting Temperture: -10 C to 60 C (14 F to 140 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 5% to 95% non-condensing Regultory Approvls MI FCC Prt 15, CISPR (N55022) Clss A MS N , N , N , N , N , N N Network Switches OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 57

58 T24122MP Series Mnged Rckmount 24-port 10/100BAS-TX + 2-port 10/100/1000BAS-TX or 1000M SFP Combo Switch with Po 24 Po SFP 2 Fetures Generl Support I802.3f Po(15.4W per port) 8.8Gbps Bck-Plne (Switching Fbric) Ring Redundncy (Recovery Time <300ms) I 802.1w Rpid Spnning Tree & I 802.1D Spnning Tree Protocol Supports Port Bsed VLAN & I 802.1Q Tg VLAN IGMP Snooping Port Security nd IP Security 19 Rck Mountble Redundnt Power Design -10 C to 60 C ( 14 F to 140 F) operting temperture Wrrnty 5-Yer Wrrnty Network Switches Ordering Informtion Model T24122MP-S SFP Options Description Mnged Rckmount 24-Port 10/100BAS-TX + 2-Port 10/100/1000BAS-TX or 1000M SFP Combo with Po n (S) = SFP option. Plese select your SFP on our SFP Options pge. n SFP module is to be purchsed seprtely. Mounting Options Power Options n 19 1U Rckmount. n DR W/2.5A 48VDC DIN-Ril Power Supply. Open Wire for Terminl Block. n DRP W/5A 48VDC DIN-Ril Power Supply. Open Wire for Terminl Block. n GS120A48 120W/2.5A 48VDC Power Supply. Open Wire for Terminl Block. n GS220A48 220W/4.6A 48VDC Power Supply. Open Wire for Terminl Block. n Power Supply is to be purchsed seprtely. Specifictions Stndrds: I BAS-T I802.3u 100BAS-TX/FX I802.3b 1000BAS-T I802.3z Gigbit Fiber I 802.3x Flow Control I802.3d Port Trunking with LACP I802.3f Power over I802.1D Spnning Tree I802.1w Rpid Spnning Tree I802.1p Clss of Service I802.1Q VLAN Tg I802.1x User Authentiction (RADIUS) I802.1b LLDP Pcket Buffer Memory: Processing Type: Switching Architecture: Bck-Plne: Pcket Throughput Ability: Forwrd nd Filter Rte: Flsh ROM: DRAM: 4 Mbits Store-nd-Forwrd Hlf-duplex bck-pressure & Full-duplex 802.3x flow control 8.8Gbps Switching Fbric 64bytes Full-Duplex 14,880pps (10Mbps) 148,800pps (100Mbps) 1,488,000pps (1000Mbps) 4 Mbytes 32 Mbytes 58

59 T24122MP Series Specifictions - Continue - Continue Jumbo Frme: 9022 bytes (for Gig Ports) Interfce: 10/100TX: 24 x RJ45 with Auto MDI/MDI-X Gigbit Fiber: 2 x Mini-GBIC Combo Sockets RS-232 Console: 1 x Femle DB9 lectricl nd Mechnicl Input Power: 48VDC Redundnt Power, Connective Removble Terminl Block for Mster & Slve Power Power Consumption: 375 Wtts Mx. Po: Stndrd: I802.3f Mode: Alterntive A Mode Positive (VCC+): RJ-45 Pin 1, 2 Negtive (VCC-): RJ-45 Pin 3, 6 Port: RJ45 Port 1 ~ Port 24 Mx. Power per Port: 15.4W Reverse Polrity: Present Alrm: Present Provides 1 Rely Output for Port Link-Down nd Power Fil LD Indictors: Power: DC-PWR1, DC-PWR2, FAULT (Per Port): Po, LNK/ACT, FDX, SFP: LNK/ACT, FDX/COL Dimensions (WxDxH): 440 x 280 x 44 mm Weight: Mounting Options: DIN-Ril / Wll Mountble Regultory Approvls MI FCC Clss A, C N , N , N , N , N , Sfety C N Stbility Testing Shock: IC Free Fll: IC Vibrtion: IC Softwre Fetures SNMP: Version: v1, v2c, v3, Web, Telnet, CLI Mngement MIB: RFC 1213 MIBII, RFC 2011 SNMP V2 MIB, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC 1215 Trp MIB, RFC 1643 Like, RFC 1757 RMON1, RSTP MIB, Po MIB, LLDP MIB, Privte MIB Trp: Up to 3 Trp Sttions Port Trunk with LACP: LACP Port Trunk: 13 Trunk Groups / Mx. 4 Trunk Members Redundnt Ring: Supports Redundnt Ring, Dul Homing nd Couple Ring Topology Redundnt Bckup Feture nd Recovery Time < 300 ms Clss of Service(I802.1p): Provides 4 priority queues per port Qulity of Service: Port, Tg, IPv4 Type of Service, IPv4 / IPv6 Different Service IGMP: IGMP v1,v2 & Query Mode. Up to 256 Groups, Supports Multicst Filter Spnning Tree: I802.1D Spnning Tree I802.1w Rpid Spnning Tree SNTP: Supports SNTP to Synchronize System Clock in Internet SMTP: Supports Simple Mil Trnsfer Protocol (6 mil Accounts for Alerts) IP Security: Supports 10 IP Addresses System vent Log: Supports System Log Record nd Remote System Log Server Port Mirror: TX, RX, or Both Pcket Port Security: 50 MAC Address ntries for Sttic MAC nd 50 MAC Filters Login Security: I802.1x Authentiction/RADIUS DHCP: DHCP Client, DHCP Server, Per Port IP Binding Functions DNS: DNS Client Feture nd Primry & Secondry DNS Server Firmwre Updte: TFTP & Console Firmwre Updte, Bckup & Restore Network Switches nvironmentl Operting Temperture: Storge Temperture: Reltive Humidity: -10 C to 60 C (14 F to 140F) -40 C to 85 C (-40 F to 185 F) 5% to 95% non-condensing OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 59

60 T-INJ30 Series Hrdened Gigbit 1-port Input + 1-port Po+ Output Injector 2 Po + 1G Hrdened Fetures Generl 1 RJ45 Dt Input Port + 1 RJ45 Power Over Output Port(Dt + Power) Support I802.3t Power over (Po+) Power Sourcing quipment Support 10/100/1000Bse-TX Support DIN-Ril & Wll-mount instlltion. xtensive LD indictiors for Po dignostics nvironmentlly Hrdened -40 C to 75 C (-40 F to 167 F) operting temperture Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T-INJ30 Hrdened Gigbit 1-port Input + 1-port Po+ Output Injector Mounting Options n Defult DIN-Ril Brcket instlled, Wll Mount Brcket is included. Po Injector & Splitter Power Options n GS60A48 60W/1.25A 48VDC Power Supply. Open Wire for Terminl Block. n Power Supply is to be purchsed seprtely. Typicl Appliction T-INJ30 Dt + Power Dt Po IP Cmer Network Switch OR NVR DC 48V Power Supply 60

61 T-INJ30 Series Specifictions Stndrds: I802.3f/t Power over Processing Type: Forwrd Hlf-duplex, Full duplex Forwrd Filter Rte: 1,488,000pps (1000Mbps) Cbling: 1000BAS-TX: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 2 x RJ45 nvironmentl Operting Temperture: -40 C to 75 C (-40 F to 167 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 0% to 95% non-condensing lectricl nd Mechnicl Input Power: 48~57VDC (Terminl Block) Power Consumption: 35W Mx. Po: Stndrd: I802.3t Port: RJ45 Mx. Power: 30W Mx per port(alterntive B Mode) LD Indictors: Power: Power Sttus Po: Po Sttus Dimensions (WxDxH): 95 x 70 x 30 mm Weight: 0.2kg Csing: Mtel cse Mounting Options: DIN-Ril / Wll Mount Regultory Approvls ISO9001 FCC Prt 15 Clss A N55022: A1: 2007 clss A Surge Protection: RJ45: 1kV Power: 500V SD: 4kV/8kV Po Injector & Splitter OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 61

62 T-SPT12V Series Hrdened Gigbit 1-port Po+ In + 1-port Dt Out Po Splitter 2 Po + 1G Hrdened Fetures Generl 1 RJ45 Po PS Input Port(Dt + Power) + 1 RJ45 Dt Output Port(Dt only). Support I802.3t Power over (Po+) Power Sourcing quipment Support 10/100/1000Bse-TX Support DIN-Ril & Wll-mount instlltion. xtensive LD indictiors for Po dignostics nvironmentlly Hrdened -40 C to 75 C (-40 F to 167 F) operting temperture Wrrnty 5-Yer Wrrnty Ordering Informtion Model Description T-SPT12V Hrdened Gigbit Po 20W 12VDC Splitter Mounting Options Power Options n Defult DIN-Ril Brcket instlled, Wll Mount Brcket is included. n 20W/12VDC output with 2-pin open wire terminl block. Po Injector & Splitter Typicl Appliction Dt T-SPT12V Dt + Power Po Network Switch Power IP Cmer 62

63 T-SPT12V Series Specifictions Stndrds: I802.3f/t Power over Processing Type: Forwrd Hlf-duplex, Full duplex Forwrd Filter Rte: 1,488,000pps (1000Mbps) Cbling: 1000BAS-TX: Ct5 or bove Mximum Distnce: Ct5 UTP up to 100m Connector: 2 x RJ45 nvironmentl Operting Temperture: -40 C to 75 C (-40 F to 167 F) Storge Temperture: -40 C to 85 C (-40 F to 185 F) Reltive Humidity: 0% to 95% non-condensing lectricl nd Mechnicl Output Power: 20W/12VDC (Terminl Block) Power Consumption: 25W Mx. LD Indictors: Po In: Po PS Power In 12V: DC 12V Output Dimensions (WxDxH): 95 x 70 x 30 mm Weight: 0.25kg Csing: Mtel cse Mounting Options: DIN-Ril / Wll Mount Regultory Approvls ISO9001 FCC Prt 15 Clss A N55022: A1: 2007 clss A Surge Protection: RJ45: 1kV Power: 500V SD: 4kV/8kV Po Injector & Splitter OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 63

64 MR-C10 19" Rck for Microtype Products Fetures Generl Dedicted for Microtype products from vrious products series Mount in stndrd 19 cbinets, occupying 1U height Power supply provided Hot-swppble design nvironmentlly hrdened -40 C to 75 C ( -40 F to 167 F) operting temperture Comptible with NHD100Micro, NHD110DRMicro, FTD100Micro, FTD110DBMicro, T1111, T1111H, T1212H nd T1100C Series Wrrnty 2-Yer Wrrnty Ordering Informtion Model Description MR-C10 1U 19 Rck for Microtype Products (includes 12V Power Adptor) Specifictions lectricl nd Mechnicl nvironmentl Input Power: 110~240VAC, 50/ 60Hz Operting Temperture: -40ºC to 75ºC (-40ºF tp 167ºF) Output Power: 40W Mx. 3.34A@12VDC Storge Temperture: -40ºC to 85ºC (-40ºF to 185ºF) Protections: Short circuit, Overlod, Over Voltge Reltive Humidity: 0% to 95% non-condensing Dimension (WxDxH): 483 x 112 x 44 mm Accessories Weight: Mounting: 0.7Kg 19 Rck, 1U Height ISO 9001:2000 FM OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 64

65 Accessories Accessories T-C12 12-slot 19 Rck Mount Chssis For T2111, T2212, T4100 nd T4200 Series Crd Modules Fetures Generl Supports up to 12 T Series Crd Modules For T2111, T2212, T4100 nd T4200 Series Plug-nd-Ply / Hot-swppble 19 Rck Mount Ordering Informtion Model Description T-C12 19 Rck Mount Chssis with 12mpty Slots (T-PSU/5V Power Supply unit nd 12 Blnk Pnels included) Specifictions lectricl nd Mechnicl nvironmentl Power (T-PSU/5V): Operting Temperture: -20ºC to 60ºC (-4ºF tp 140ºF) Input: 110VAC / 60Hz Storge Temperture: -40ºC to 85ºC (-40ºF to 185ºF) 220VAC / 50Hz Reltive Humidity: 0% to 95% non-condensing Output: 5VDC Mx. Current: 25A No. of mpty Slots: 12 Dimension (WxDxH): 486 x 191 x 134 mm Weight: 3.1Kg Mounting: 19 Rck, 3U Height ISO 9001:2000 FM OT Systems Ltd., Nov 2014 Due to continuous improvement, ll product specifictions re subject to chnge without further notice. 65