Catalog Power Supplies

Transcription

1 Ctlog Power Supplies 2016 / 06 Phone.: +49 (0) Fx: +49 (0)

2 DC / DC Power Supplies 12 Vdc Output type numbers: DC / DC Power Supplies 12 Vdc Output type numbers: DC / DC Power Supplies 19 Vdc Output type numbers: DC / DC Power Supply 19 Vdc Output type numbers: AC / DC Converter for Field Applictions type number Vc to 24 (28) Vdc / 100 A Power Supply / Bttery Chrger type numbers: (28) Vdc 70 A HPC 2000 Bttery Pck nd Bttery Chrger type number Power Supply / Bttery Chrger type number (28) Vdc / 100 A to 120 A Fx: +49 (0) issue dte 2016 / 06

3 High Isoltion Trnsformer (AC / AC Converter) type number Series STT 1 kva to 3 kva 230 Vc-Output Power Supply with High Isoltion Trnsformer type number Series TS 28 Vdc / 80 A (24 Vdc / 100 A) Plus 230 Vc-Output Power DC / AC Supply NC24 type number True Sine Wve Power DC / AC Supply type number Pure Sine Wve Inverter Modulr Power System cc. VG MoFess Module for Militry Ground Vehicles Connector Box 230 Vc type number Vdc Emergency Power Supply for Mobile Vehicle Use type number Fx: +49 (0) issue dte 2016 / 06

4 DC / DC Power Supplies 12 Vdc Output type numbers: Description: This fmily of DC / DC power supplies is designed for utomotive pplictions to be used under hrsh environmentl conditions. type number Input voltge: Consumption: Output voltge: Output current: Connector in / out: 18,0 Vdc to 36,0 Vdc 0,05 to 5,0 A t 24 Vdc 12,0 Vdc 8,0 A type number Input voltge: Consumption: Output voltge: type number type number SJT/PG (type number 00791) SJT/SJT (type number 00846) 11,0 Vdc to 36,0 Vdc 0,05 to 2,5 A t 24 Vdc 12,0 Vdc Output current: 4,0 A. Connector in / out: SJT/PG (type number 00845) SJT/SJT (type number 00847) Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type Mechnicl Specifictions: Mteril: Aluminium Dimensions: 194 x 101 x 40 mm (W x D x H) Ground terminl: Finish / colour: pprox. 1 kg M8 Powder coting, green RAL 6031 HR or TBD Protection: IP 66 (EN 60529) Electricl Dt: Input ccording to: VG Voltge ccurcy: Temperture coefficient: Ripple & noise, 20MHz BW: mx.: Option: ±1,0 % mx ±0,05 % / C mx 60 mv RMS 150 mv pk-pk Sfety ccording to: EN EMC / EMI: MIL-STD-461E or TBD Environmentl Dt (cc.to MIL-STD-810F): Temperture: Humidity: Vibrtion.: Shock: -40 C to +85 C (operting) -46 C to +90 C (storge) 0 % to 100 % rel. Fig C3 for wheeled vehicles 10 x 10 g / 6 ms Remote control for electroniclly switch on nd off. Fx: +49 (0) issue dte 2014 / 04

5 DC / DC Power Supply 12 Vdc Output type numbers: Description: This DC / DC power supply is designed for utomotive pplictions to be used under hrsh environmentl conditions. Mechnicl Specifictions: type number Input voltge: Consumption: Output voltge: Output current: Connector In: Connector Out: 18,0 Vdc to 36,0 Vdc 0,05 to 5,0 A t 24 Vdc 12,0 Vdc 8,3 A VG95234A-10SL-3PN A=VCC, B=GND, C=housing VG95234A-10SL-3SN A=VCC, B=GND, C=housing Mteril: Aluminium Dimensions: 194 x 101 x 40 mm (W x D x H) Ground terminl: Finish / colour: pprox. 1 kg M8 Powder coting, green RAL 6031 HR or TBD Protection: IP 66 (EN 60529) Electricl Dt: Input ccording to: VG Voltge ccurcy: Temperture coefficient: Ripple & noise, 20MHz BW: mx.: ±1,0 % mx ±0,05 % / C mx 60 mv RMS 150 mv pk-pk Sfety ccording to: EN EMC / EMI: MIL-STD-461E or TBD Environmentl Dt (cc.to MIL-STD-810F): Temperture: Humidity: Vibrtion.: Shock: -40 C to +85 C (operting) -46 C to +90 C (storge) 0 % to 100 % rel. Fig C3 for wheeled vehicles 10 x 10 g / 6 ms Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type Option: Remote control for electroniclly switch on nd off. Fx: +49 (0) issue dte 2016 / 06

6 DC / DC Power Suppies 19 Vdc Output type numbers: Technicl Dt: Description: This fmily of DC / DC power supplies is designed for utomotive pplictions to be used under hrsh environmentl conditions. It opertes s buck converter t frequency of 80kHz. Generl fetures: Input ccording to: VG Sfety ccording to: EN Isoltion Voltge: Isoltion resistnce: 10 7 Ω 200 Vdc In-Out type number type number Dimensions: 175 x 113 x 58mm (W x D x H) By courtesy of rod mildef GmbH pprox. 1 kg Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type Input voltge: Consumption: Output voltge: Output current: Connector in / out: Efficiency: Protected ginst: Option: Output: 24 Vdc / 4,0 A 16,0 Vdc to 34,0 Vdc 0,02 A to 3,0 A t 24 Vdc 19,0 Vdc ±0,2 Vdc indicted by LED on top 4,2 A SJT / SJT typ. >83 % t 24 Vdc input reverse polrity over voltge short-circuit no-lod Ripple & noise: <20 mv RMS t 20 MHz Environmentl Conditions: Protection: IP 65 (EN 60529) EMC: VG 95373: MIL-STD 461E: LA01; SA02; SA04; LF01; LF02; LF03; LF05; SF03; SF01 CE102; CS101; CS114; CS115; CS116; RE101; RE102; RS101; RS 103 Conditions ccording to MIL-STD-810F: Temperture: Temp. shock: Humidity: Low pressure (ltitude): Vibrtion: Shock : -40 C to +85 C (operting) -46 C to +90 C (storge) -40 C to +70 C (ΔT <1min) up to 95 % rel. up to 4500 m operting 1,5 g, 60 Hz to 400 Hz 1,0 g, 400 Hz to 2000 Hz 10 g, 6 ms (operting) Fx: +49 (0) issue dte 2014 / 04

7 DC / DC Power Supply 19 Vdc Output type numbers: ZN Technicl Dt: type number Ares of Appliction: type number type number type number ZN Our miniture HV-Power Supplies re pplied in industry, in reserch projects nd with smll CRT-monitors for specil pplictions. Modified versions re lso used in vionic equipment. The high qulity stndrd nd proven technologies gurntee high relibility. Input voltge: Output voltge 1: Output voltge 2: Output voltge 3: Output fetures: type number Input voltge 1: Input voltge 2: Output voltge: type number Input voltge 1: Input voltge 2: Output voltge 1: Output voltge 2*: Output voltge 3*: 24 Vdc 14 kvdc ±1 % 400 μa 1,7 kvdc < 5 μa 770 Vdc < 5 μa temperture stbility 100 ppm / C, overcurrent protection 15 Vdc to 20 Vdc / 100 ma 55 Vdc to 65 Vdc / 600 ma 30 kvdc ±0,4 % 550 μa temperture stbility 100 ppm / C overcurrent protection 12 Vdc 28 Vdc 10 kvdc to 14 kvdc 400 μa 390 Vdc to 600 Vdc < 200 μa -55 Vdc to -80 Vdc < 200 μa *levels 2 / 3 re linked to level 1 ZN Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type Input voltge 1: 15 Vdc ± 3 % Output voltge 1: Output voltge 2: Output voltge 3: Output voltge: 7,5 kvdc ±1 % 100 μa 1,25 kvdc < 5 μa 200 Vdc to 500 Vdc < 5 μa temperture stbility 100 ppm / C, Overlod protection Fx: +49 (0) issue dte 2014 / 04

8 AC / DC Converter for Field Applictions type number Vc to 24 (28) Vdc / 100 A Description: This Power AC / DC Converter ws designed for open ir field pplictions, to be supportive for bttery chrge for mobiles from line voltge with high power. The provided stnds llows stble distnce to the erth nd the required ventiltion of the converter. Input is electriclly isolted from output ccording to EN Technicl dt: Input voltge: Consumption: Output voltge: Output current: Output relese: Output protection: Inrush current: Efficiency: 230 Vc ±15 %, 50 Hz. mx. 16 A sinusoidl conform to EN Vdc +3, -5 % for 85 A, 24 Vdc +3, -5 % for 100 A mx. 100 A 20 C, limited for overlod or incresed temperture only fter proved connection with vehicles supply system no-lod proof short-circuit proof < 30 A t 230 Vc pk typ. 83 % t 230 Vc nd 20 to 80 % lod By courtesy of Rheinmetll Lndsysteme GmbH Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type Isoltion voltge: Environmentl Dt: MIL-STD-810F Operting temp.: -46 C to +63 C Humidity: 95 % rel. with thwing Slt fog: 5 % t 35 C Vibrtion.: Shock: EMI / EMC: Fig C3 for wheeled vehicles 10 x 10 g / 6 ms MIL-STD-461C respectiv. D ESD.: EN Lightning protect.: floting output in ccordnce to VDE 0554 MTBF: > h t 25 C Dimensions: Housing: 300 x 480 x 191 mm, (W x D x H) with stnds 15 kg mde of cst G-AlSi12 (DIN 1725) two crrying hndles integrted in the het sink cptive connector covers ground terminl M8 on rer four pierced holes Φ 25 mm for steel cble s nti-theft device Protection: IP 66 (EN 60529) STANAG 4145 / AEP4, nnex (Lnd) / NEMP: STANAG 4236, Issue 2 Accessories: Connecting cbles: 1) 3m screened led, 230 Vc with integrted 16 A PRCD-S gurd circuit (TBD) nd CEE 230V respectively Souriu Series 847 connectors. 2) 5m screened led (power supply to mobile) with VG connectors of type M-24-12PN, respectively N Fx: +49 (0) issue dte 2014 / 04

9 Power Supply / Bttery Chrger 24 (28) Vdc / 70 A type numbers: Electricl Dt: Input: type number Nominl voltge: 230 Vc ±15 % Line frequency: Consumption: Inrush current: Hrmonics (current): 45 Hz - 60 Hz < 12 A (depending on model) < 30 A Power fctor: > 0,95 Power fctor corrected to EN Output: Rer view type number Output voltge: Output tolernce: Output current: Output protection: Minimum lod: Efficiency: Isoltion: Sfety: EN Vdc (intern. dj. 26 Vdc - 28 Vdc) -4 % / + 0 % (0 100 % lod) 30 A / 40 A / 50 A / 60 A (depending on model) Current limit (110 % of INom) Short circuit protection Over voltge shutdown (125 %) Over temperture shutdown with utomtic recovery no minimum lod required typ. 85 % 88 % t 230 Vc Input-output: 3000 Vc Input-chssis: 1500 Vc Output-chssis: 200 Vdc Description: This rnge of modulr AC/DC-Power-supplies is designed for chrging btteries nd bttery bck-up pplictions for hrsh environments nd mobile pplictions. Signls / Alrms: Disply: Alrms (Rely contct): Green LED: Power-on-signl Red LED: Alrm (btt-low) Power ok, Bttery-low Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type pge 1 of 2 Fx: +49 (0) issue dte 2014 / 04

10 Power Supply / Bttery Chrger 24 (28) Vdc / 70 A type numbers: Connectors: Line input: DC-output: Alrms: Ground terminl: Environmentl Dt: ECTA 133, 3-pin-connector High current studs (M8) SJT00RT, 6-pin-connector Studs M8 on front or rer Protection: IP 65 (EN 60529) Cooling: Convection cooling Automtic temperture controlled fn bove +50 C hetsink temperture Environmentl Dt (cc. to MIL-STD-810F): Operting temp. rnge: Operting temp. optionl: Derte power: Humidity: -32 C to +63 C -46 C to +85 C 2,5 % / C bove 50 C mbient for Version 40 A - 60 A 0 % to 100 % rel. Slt fog: 5 % t 35 C Vibrtion.: Shock: Fig C3 for wheeled vehicles 10 x 10 g / 6 ms Mechnicl Specifictions: Dimensions: Mteril: Finish / Colour: Avilble Options: Line Input Voltges: Connectors: Colour: Line Filter / EMC: RoHS-Complince: 360 x 350 x 124 mm (W x D x H) (overll, without connectors) <10 kg (depending on model) Aluminium Powder coting, green RAL 6031 Single Phse 110 Vc 60 Hz or 95 Vc Vc, 50 / 60 Hz (wide rnge input) (input / output) others on request Blck or white or on request FCC / EN / VG / MILstndrds / TBD On request Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type pge 2 of 2 Fx: +49 (0) issue dte 2014 / 04

11 HPC 2000 Bttery Pck nd Bttery Chrger type number Bttery - Technicl Dt: Description: Bttery Pck with chrger The externl bttery pck hs been designed for field pplictions of the HPC 2000 hnd-held computer system. Mounted on users belt the bttery powers the system up to 7 hours. The btteries re shock proven nd hermeticlly seled for wter nd dust protection. The length of the spirl cble between the bttery pck nd the system connector is between 0,45 nd 2,5 m. The chrging chrcteristic is optimized for NiMH-btteries. The chrge time for completely dischrged btteries is pprox. 2 hours. A built in temperture sensor controls the temperture directly t the btteries. In cse of bttery temperture is rising over 60 C, the chrge process will be stopped. Technology: Cpcity: Voltge: NiMH 4,5 AH 24 Vdc pprox. 2,2 kg Dimensions: 230 x 120 x 60 mm (W x D x H) Chrger - Technicl Dt: Inputs voltges: Input connectors: 230 Vc / 0.5 A 18 Vdc to 32 Vdc / 3 A 230 Vc: IEC 320 socket DC: cr-power-plug Dimensions: 250 x 215 x 100 mm (W x D x H) Bttery over-temperture protection: >60 C when chrging Options: Other voltges power clss interfces chrging chrcteristics Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type Fx: +49 (0) issue dte 2014 / 04

12 Power Supply / Bttery Chrger 24 (28) Vdc / 100 A to 120 A type number Electricl Dt: Input: Nominl voltge: Line frequency: Consumption: Inrush current: Hrmonics (current): Power fctor: 400 Vc ±10 % (3 phse) nd 230 Vc ±15 % (1 phse) 50 Hz - 60 Hz <13 A t 230 Vc < 30 A Power fctor corrected to EN for 230 Vc typ. 0,95 (1 phse with PFC) typ. 0,80 (3 phse) Output (single phse powered): Description: Rer view This rnge of modulr AC / DC-Power-supplies is designed for chrging btteries nd bttery bck-up pplictions for hrsh environments nd mobile pplictions. Output voltge: 28 Vdc (int. dj. 24 Vdc - 28 Vdc) Output tolernce: +0 % / -4 % / (0 % % lod) Output current: 80 A t 24 Vdc Output power: > 1900 W mx. Output (three phse powered): Output voltge: 28 Vdc (int. dj. 24 Vdc - 28 Vdc) Output tolernce: +0-4 % / (0-100 % lod) Output current: 120 A for 24 Vdc Output power: 2880 W mx. Generl Fetures: Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type Sfety: EN Output protection: Minimum lod: Efficiency: Isoltion: Current limit (120 % of INom) Short circuit protection Over voltge shutdown (125 %) Over temperture shutdown with utomtic recovery no minimum lod required typ. 88 % t 400 Vc typ. 83 % t 230 Vc Input-Output: 3000 Vc Input-Chssis: 1500 Vc Output-Chssis: 200 Vdc pge 1 of 2 Fx: +49 (0) issue dte 2014 / 04

13 Power Supply / Bttery Chrger 24 (28) Vdc 100 A to 120 A type number Connectors: Line input 230 Vc: Line input 400 Vdc: DC-output: Alrms: Ground terminl: Environmentl Dt: ECTA 133, 3-Pin-Connector ECTA 133, 5-Pin-Connector High current studs (M8) SJT00RT, 6-Pin-Connector Studs M8 on front or rer Protection: IP 54 (EN 60529) Cooling: Convection cooling temperture controlled fn bove +50 C hetsink temperture Signls / Alrms: Disply: Alrms (rely contct): Mechnicl Specifictions: Dimensions: Mteril: Finish / Colour: Green LED: Power-on-Signl Red LED: Alrm (Btt-low) Power ok, Bttery-low 360 x 500 x 124 mm (W x D x H) (overll, without connectors) pprox. 16 kg Aluminium Powder coting, green RAL 6031 or TBD Environmentl Dt (cc. to MIL-STD-810F): Operting temp. rnge: -40 C to +70 C Derte power: 2 % / C for Tmb > 50 C Humidity: 0 % to 100 % rel. Slt fog: 5 % t 35 C Vibrtion.: Shock: Fig C3 for wheeled vehicles 10 x 10 g / 6 ms Options: Line input voltges: Line filter / EMC: RoHS-complince: Single Phse 110 Vc 60 Hz or 95 Vc Vc, 50 Hz / 60 Hz (Wide Rnge Input) FCC / EN / VG / MILStndrds / TBD On request Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type pge 2 of 2 Fx: +49 (0) issue dte 2014 / 04

14 High Isoltion Trnsformer (AC / AC Converter) type number Series STT 1 kva to 3 kva 230 Vc-Output Technicl Dt: Input: Description: This AC-AC converter bsed on new concept with high frequency trnsformer which llows to provide high isoltion (reinforced) between input nd output. The new technology llows weight reduction of up to 70 % (compred with existing 50 Hz / 60 Hz trnsformers). The internl high frequency trnsformer genertes 230 Vc pure sine wve output t 1 kva up to 3 kva (depending on model). Nominl voltge: 230 Vc ±10 % Line frequency: Consumption: Inrush current: Hrmonics (current): 50 Hz < 16 A < 30 A Power fctor: typ. 0,96 % Output: Output voltge: Output tolernce: Output current: Output power: Output protection: Power fctor corrected to EN Vc -10 % / +15 % (0 100 % lod) 4 to 10 A (Tmb 40 C) 1 kva to 3 kva Efficiency: typ. 90 % Minimum lod: Applicble lod: Isoltion voltge: Sfety Output protection clss: Current limit (110 % of INom) Short circuit protection Over voltge shutdown (125 %) Over temperture shutdown with utomtic recovery no minimum lod required cpcitive, inductive or resistive until cos φ< 0, Vc (input output) 3000 Vc (chssis line) cc. to EN (Sfety trnsformers) II (no PE) Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type pge 1 of 2 Fx: +49 (0) issue dte 2014 / 04

15 High Isoltion Trnsformer (AC / AC Converter) type number Series STT 1 kva to 3 kva 230 Vc-Output Signls / Alrms: Opticl indictor: Mechnicl Specifictions: Mteril: Dimensions: Finish / Colour: Connectors: Green LED: Power ok Red LED: Filure 4 White LED:Lod-Level Aluminium 360 x 350 x 124 mm (W x D x H) (overll, without connectors) < 8 kg Powder coting, green RAL 6031 Hr or TBD Environmentl Dt: Temperture: Vibrtion / Shock: -40 C to +70 C (operting) -46 C to +85 C (storge) TBD Protection: IP 65 (EN 60529) Line filter / EMC: Option: Input voltge: Output voltge: Specil lods: FCC / EN / VG / MIL Stndrds / TBD 95 Vc Vc, 50 Hz - 60 Hz 110 Vc, 50 Hz - 60 Hz on request Line input: Output: Grounding terminl: ECTA 133, 3 Pin Connector 2 wire cble M8 on front or rer This is preliminry dt sheet. Specifictions re subjected to chnge. Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type pge 2 of 2 Fx: +49 (0) issue dte 2014 / 04

16 Power Supply with High Isoltion Trnsformer type number Series TS 28 Vdc / 80 A (24 Vdc / 100 A) Plus 230 Vc-Output Technicl Dt: Input: (With RCD-Device) Description This power supply / bttery chrger bsed on new concept with high frequency trnsformer which lso provides the high isoltion (reinforced) between input nd output. The new technology llows weight reduction of up to 70 % (compred with existing 50 Hz / 60 Hz trnsformers). The internl high frequency trnsformer genertes lso n dditionl 230 Vc output t bout 1 kva. Output power cn be shred between the 24 Vdc nd 230 Vc output. RCD-Protection is optionl vilble. Nominl voltge: 230 Vc ±15 % Line frequency: Consumption: Inrush current: Hrmonics (current): 45 Hz to 60 Hz < 16 A < 30 A Power fctor: > 0,95 Output: (Low voltge) Output voltge: Output tolernce: Output current: Output protection: Minimum lod: Efficiency: Power fctor corrected to EN Vdc (dj Vdc) -4 % / +0 % (0 100 % lod) 80 / 100 A (depending on model) Current limit (110 % of INom) Short circuit protection Over voltge shutdown (125 %) Over temperture shutdown with utomtic recovery no minimum lod required typ. 85 % 88 % t 230 Vc Output: (230 Vc / 50 Hz) Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type Output voltge: Output tolernce: ± 8 % Output current: Output protection: Minimum lod: Efficiency: Isoltion voltge: Protection clss: 230 Vc 50 Hz 110 Vc optionl 4 A - 6 A Short circuit protection Over voltge shutdown Over temperture shutdown with utomtic recovery no minimum lod required typ. 89 % t 230 Vc 4000 Vc (input output) 3000 Vc (chssis line) II no PE pge 1 of 2 Fx: +49 (0) issue dte 2014 / 04

17 Power Supply with High Isoltion Trnsformer type number Series TS 28 Vdc / 80 A (24 Vdc / 100 A) Plus 230 Vc-Output Signls / Alrms: Opticl indictor: Mechnicl Specifictions: Mteril: Dimensions: Finish / Colour: Green LED: Power ok Red LED: Bttery low White LED: 230 Vc-Out ctive Aluminium 360 x 500 x 145mm (W x D x H) (overll dimensions) < 20 kg Powder coting, green RAL 6031 Hr or TBD Environmentl Dt: Temperture: Vibrtion / Shock: -20 C to +50 C (operting) -40 C to +85 C (storge) TBD Protection: IP 65 (EN 60529) Line Filter / EMC: Option: Input voltge: FCC / EN / VG / MIL Stndrds / TBD 400 Vc 50 Hz Connectors: Line input: Output: Alrm: Output DC: Grounding terminl: ECTA 133, 3 Pin Connector CEE-Connector (3 pin) or VG96926 SJT00RT, 6 Pin Connector High current studs M8 isolted M8 on front or rer This is preliminry dt sheet. Specifictions re subjected to chnge. Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type pge 2 of 2 Fx: +49 (0) issue dte 2014 / 04

18 Power DC / AC Supply NC24 / 225 / B type number True Sine Wve Technicl Dt: Performnces: A single- chip- RISC processor genertes qurtz stble AC voltge nd controls the output level nd the converter temperture. Automtic minimum lod detection, 2 VA to 40 VA (djustble) on stnd-by mode. Well suitble to operte computers nd other IT-Technology designed for min voltge of 230 Vc Continuous output power: Mximum output power: Input voltge (nominl): Input voltge rnge: Consumption: Inrush current: 300 VA 350 VA for 10 min. t Tmb = 20 C 24 Vdc 21 Vdc to 32 Vdc 12 A 37 A Output voltge: 230 Vc +/-5 % Output frequency: Output current: Short circuit current (mx. 0,5s): 50 Hz +/-0,5 % true sine wve 1,1 A 3 A Efficiency (mx.): 93 % Stndby mode utomticlly: Stndbyconsumption: Sfety: EMC: Protection: Temperture: Cooling: <0,5 VA output power 3 W t 24 Vdc EN EN , EN Short circuit nd overlod proof 0 C to +60 C (operting) -20 C to +71 C (storge) Temperture nd lod controlled fn Dimensions: 250 x 110 x 75 mm (W x D x H) Protection: IP 20 pprox. 3 Kg Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type Fx: +49 (0) issue dte 2014 / 04

19 Power DC / AC Supply type number Pure Sine Wve Inverter Technicl Dt: Performnces: This pure sine wve inverter ws built to supply 230 Vc for electricl equipment of ground vehicles from the vehicle electricl system voltge of 24 Vdc. Pure sine wve output (THD <3 %) Power sve function Stndby function 93 % efficiency t full lod Driving highly rective & cpcitive lod t strt moment LED Indiction for input voltge, output lod level nd filure sttus Output controlled by residul current device Reverse polrity protection by specil coded connector Output frequency cn be fixed internlly on 50 Hz or 60 Hz Other performnces on request Continuous output power: Mximum output power (3 Min.): Surge rting: Input voltge (nominl): Input voltge: 700 VA 800 VA 1400 VA 24 Vdc 21 Vdc to 30 Vdc Output voltge: 230 Vc +/-3 % Output frequency: 50 Hz +/-0.05 % Output wveform: Pure sine wve (THD <3 %) Efficiency (full lod): 93 % No lod current: Stndby current: Input level indictor: Lod level indictor: Filure indictor: Protection: Sfety: EMC: Electricl isoltion input / output: Temperture: Cooling: 0.6 A 0.15 A Red / ornge/ green LED Red / ornge/ green LED Red LED Overlod, short circuit, over- / under- input voltge, over temperture, residul-current-operted protective device (RCD) EN60950 EN55022:1997, EN55024:1997, EN :1998, EN :1995 Insultion test voltge 500 Vdc -10 C to +40 C (operting) -32 C to +70 C (storge) Convection Dimensions: 426 x 160 x 141 mm (W x D x H) Protection: IP 55 pprox. 7,5 Kg Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type Fx: +49 (0) issue dte 2014 / 04

20 Modulr Power System cc. VG MoFess Module for Militry Ground Vehicles This new modulr Power System for Militry Ground Vehicles bsed on stndrd box incorporting up to three different power modules. The power inlet module (230 Vc) includes line filter, lightning protection (optionl) nd lso n engine immobiliser nd utomtic kickoff connector. Another module is generting clen nd isolted line voltge of 230 Vc up to 12 A. This revolutionry concept is bsed on new innovtive high frequency trnsformer which sves bout 70 % weight nd volume compred to conventionl 50 Hz-trnsformer. The clen 230 Vc-line is protected vi fult current protection switch (RCD) nd cn now be used for ny consumer in the cr like bttery chrger, computer.s.o. Another vilble module is AC/DC-power bck-up system with bttery chrger which is ble to chrge led cid btteries up to 60 A (optionl 100 A) t 24 Vdc / 28 Vdc. More intermedite bus converter modules ccording to the new Germn militry stndrd VG re vilble nd ll cn be plugged into this stndrd power box system. Sfe power for militry ground vehicles (tnks, trucks, continers) Output power 1 kva - 3 kva Automtic power line disconnection t lrm strt Input from distorted power lines nd 230 Vcemergency-genertors Light weight high-frequency trnsformer Modulr design for verstile use Flexible plug-in modules AC/AC-converter module Bttery chrger module up to 100 A DC/DC-modules cc. to VG Lightning protection (up to 20 ka) EMI: MIL-Std 461 (optionl) Protection clss II (reinforced Isoltion) High isoltion 4 kv (DIN/EN61558) Input-output Isoltion EN60950 Protection degree IP 54 (or IP 65) Operting: -46 C bis +85 C Higher power systems (up to 14 kva) vilble with 3-phse input Fetures: AC/AC nd DC/DC power supply Connection to unknown 110 Vc / 230 Vc line systems (TN, TT-Systems) nd genertors Bttery bck-up + chrging Intermedite bus voltge genertion 400 Vdc Vdc Power line filter nd lightning protection Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type pge 1 of 8 Fx: +49 (0) issue dte 2014 / 04

21 Modulr Power System cc. VG MoFess Module for Militry Ground Vehicles Avilble Modules: Module NA-230-AW type number Power Line Connection Module with Stndrd CEE-Plug nd utomtic disconnection nd/or engine immobiliser Option FI: EMI-Filter nd Lightning Protector (build-in in Module NA) Module NA-230 type number Powerline Connection Module with Stndrd CEE-Plug (230 Vc single Phse) Module AC-TT type number AC / AC High-Frequency-Isoltion-Trnsformer Output Power 2,5 kva (Clss II equipment) Module DC-BAT type number Bttery-Bck-Up Supply nd Chrger 28 Vdc / 60 A (80 A pk) Input: 400 Vdc Module AC-BAT type number Bck-Up Power Supply nd Chrger 28 Vdc / 60 A Input: 230 Vc with reinforced isoltion (Clss II) Module DC-TT type number AC / DC High-Frequency-Trnsformer 2,5 kva (230 Vc into 400 Vdc Intermedite Bus) Power Box MoFess type numbers: Enclosure Box for up to 3 Modules Module SV-1224 type number DC / DC Intermedite Bus Voltge Converter Dul Output: 12 Vdc / 20 A nd 24 Vdc / 10 A (Consult Fctory for other Voltges / Currents) Module NA-230-ST type number Stnd-lone Power Line Connection Module with Stndrd CEE-Plug (no enclosure required) pge 2 of 8 Fx: +49 (0) issue dte 2014 / 04

22 Modulr Power System cc. VG MoFess Module for Militry Ground Vehicles Block Digrm Typicl ppliction: AC-line input-module with EMC-Filter / lightning protection, high-isoltion AC / AC-trnsformer nd bttery chrger Modulr Energy Genertion nd Distribution System Bttery 28 Vdc Module NA-230-AW Module AC-TT Module AC-BAT for e.g. 110 Vc / 230 Vc (trnsformer) Computer from AC-line or 230 Vc-input Input: 230 Vc g g Input: 230 Vc g Output: 28 Vdc / g Displys emergencygenertor Communiction Output: 230 Vc / 60 A 12 A Option FI Filter / lightning protection g 230 Vc-consumers Typicl ppliction with Intermedite Bus Voltge: AC-line lnput-module with utomtic kick-off-connector, EMC-Filter /Lightning protection, AC / DC-Bustrnsformer nd Bttery chrger Bttery 28 Vdc Module NA-230 Module DC-TT Module DC-Bt for e.g. 110 Vc / 230 Vc Computer from AC-line or g 230 Vc g (Bus-trnsformer) g g Input: 400 Vdc g Displys emergencygenertor Filter (optionl) Input: 230 Vc Output: 28 Vdc / Communiction Output: 400 Vdc 80 Apk Engine demobiliser Kick-off connector Intermedite Bus 400 Vdc g Module SV1224 DC/DC-Converter Dul Output 12 Vdc / 20 A 24 Vdc / 10 A g 12 Vdc-cr-electronics g 24 Vdc-equipment pge 3 of 8 Fx: +49 (0) issue dte 2014 / 04

23 Modulr Power System cc. VG MoFess Module for Militry Ground Vehicles Technicl Specifictions: AC-connector ccording to VG (3pole) Engine immobiliser NA-230-AW: utomtic kick-off for power connector t engine strt Mnul connector relese Wter proof box to meet IP 54 - IP 65 Protection Clss II Weight ppr. 5 kg Module NA-230-AW: type number Module NA-230: type number (AC-Line connection Module 230 Vc) Option FI (EMC-Filter nd Lightning Protection) Line filter cc. to MIL810 (VG or other MIL-Std. on request) Lightning protection up to 20 ka NEMP / tempest-line filter pprox. 1 kg Module AC-TT High Frequency AC / AC-Trnsformer type number Build to meet: Input voltge: Hrmonics: optionl: VDE/EN61558 (Isoltion trnsformer) 230 Vc ( %) / 45 Hz Hz (optionl: 115 Vc ) Power fctor corrected to EN/DIN (PFC) Wide Input 95 Vc Vc / 50 Hz - 60 Hz Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type Inrush current: Fuse: Sfety-isoltion: Protection clss: < 30 A 16 AT Sfety: EN EMC / EMI: 5000 Vdc /prim-sec. cc. to VDE II (no protective erth) filtered to meet EN55022 / A MIL810 (optionl others) EN Trnsients: EN , nd CE-conformity: Output power: Output voltge: Current: Fult current protection: Mnufcturers declrtion 2,4 kva t 230 Vc 1,4 kva t 115 Vc 230 Vc / 50 Hz +10 % to -15 % (or 60 Hz) Version 1: 8 A Version 2: 12 A RCD-Protector optionl pprox. 4 kg pge 4 of 8 Fx: +49 (0) issue dte 2014 / 04

24 Modulr Power System cc. VG MoFess Module for Militry Ground Vehicles Technicl Specifictions: Module DC-BAT Bttery Bck-up Power Supply nd Chrger type number Input (AC-BAT): Input (DC-BAT): Fuse: Output voltge: Tolernce: Current (chrger): Overcurrent: No lod: 230 Vc / 50Hz Hz (-15 % to +10 %) 400 Vdc (from intermedite bus) 16 A (mgn. tripped) 24 Vdc to 28 Vdc -0,5 Vdc to +0,0 Vdc 60 A / 80 A pk (Derte bove +50 C) short circuit protected no minimum lod Current limit: typ. 110 % Bttery type: Led cid btteries up to 200 Ah pprox. 3,5 kg Technicl Specifictions: Module DC-TT High Frequency AC / DC-Converter type number Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type Input: Optionl: Fuse: Output voltge: Current: Overcurrent: No lod: 230 Vc / 50 Hz Hz (-15 % to +10 %) Wide input 110 Vc to 230 Vc 16 A 400 Vdc 8 A short circuit protected no minimum lod Current limit: typ. 110 % Opticl indictor: Weight : Input AC-OK Overlod DC-Out ok pprox. 4 kg pge 5 of 8 Fx: +49 (0) issue dte 2014 / 04

25 Modulr Power System cc. VG MoFess Module for Militry Ground Vehicles Technicl Specifictions: Module SV-1224 Dul Output Power Supply type number Input: Fuse: Output 1: Output 2: Overcurrent: No lod: 400 Vdc (from intermedite bus) (optionl AC-input) 16 A (mgn. tripped) 12 Vdc up to 20 A 24 Vdc to 28 Vdc up to 10 A short circuit protected no minimum lod Current limit: typ. 110 % pprox. 3,5 kg Typicl ppliction: AC-line input-module with utomtic kick-off-connector, EMC-filter / lightning protection, high-isoltion AC / ACtrnsformer nd one blnk pnel AC-line input-module with engine immobiliser nd highisoltion btterychrger (SELV) Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type pge 6 of 8 Fx: +49 (0) issue dte 2014 / 04

26 Modulr Power System cc. VG MoFess Module for Militry Ground Vehicles Technicl Specifictions: Rer View: Box with 80 A power-connector (left) nd signl connectors Power Box Mxx *) For direct ssembling in cr bodies (stndrd box system ) Optionl Signls: Alrm Power ok Bttery low Power disconnect Protection: IP 54 (optionl to IP 65) Temperture operting: Dimensions: Connectors: Ground terminl: Signls: Mounting: EMC-gsket: Seling (front): Mteril / Colour: Shock / Vibrtion: -20 C to +70 C optionl: -46 C to +70 C 353 x 353 x 298 mm (W x H x D) Depth my vry up to 400 mm depending on bckplneversion pprox. 4 kg (without modules) depend on used options 2 Bolts M8 6 pin Connector (femle) 20 screws (M6) optionl on frontside Rubber seling (wterproof) Aluminium / RAL 6031 green cc. to MIL810G *) Finl version vries on customers requests (power level, number of used modules, type of connectors.s.o.) Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type pge 7 of 8 Fx: +49 (0) issue dte 2014 / 04

27 Modulr Power System cc. VG MoFess Module for Militry Ground Vehicles Overview of possible Modul combintions Modul NA-230-LD CEE Connector + Lightning Detection Modul NA-230 CEE Connector Modul DC-BAT 400 Vdc 24 (28) Vdc Modul AC-TT-RCD with RCD- prot. 230 Vc 230 Vc Power Box configured with connectors for X-Pwr, P-Out, P-In Control & Signl Modul NA-230- AW-LD CEE Connector + Lightning Detection Modul NA-230-AW CEE Connector Modul AC-BAT 230 Vc 24 (28) Vdc Modul AC-TT without RCD- prot. 230 Vc 230 Vc Power Box configured with connectors for Pwr-Out, Pwr-In, Control & Signl Modul NA-400- AW-LD CEE Connector + Lightning Detection Modul NA-400-AW CEE Connector Modul SV Vdc > 24 (28) Vdc > 12 Vdc Modul DC-TT AC/DC Converter 230 Vc 400 Vdc Power Box configured with connectors for X-Pwr, Pwr-In, Control & Signl Modul NA-230-ST CEE Connector Stnd lone / Cse Dummy Pnel Power Box configured with connectors for Power-In, Control & Signl pge 8 of 8 Fx: +49 (0) issue dte 2014 / 04

28 Connector Box 230 Vc type number Power dpter box with self-relese-connector & lightning protection for militry pplictions Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type By courtesy of Rheinmetll Lndsysteme GmbH Fx: +49 (0) issue dte 2014 / 04

29 24 Vdc Emergency Power Supply for Mobile Vehicle Use type number Min Fetures: This emergency power supply is ble to distribute power of bout 10 A t lest to length of time > 30 min. fter disconnecting from the input power. Opertion: norml opertion mens the input voltge is feed through to the output. When the input power is cut-off, the output is further powered from the bttery without ny brek. Note tht in this stte the output voltge is equl the bttery voltge, which will diminish by time nd lod. The output connectors provide signls for voltge ok nd filure. On filure there is lso n coustic lrm, resettble by signl lines on output connectors Attention: there is no input circuit breker, so the customer hs to look for suitble sfety device in the input line. Technicl Dt: Input voltge (nominl): Input voltge: Output voltge (nominl): Bttery cpcity: Bttery chrge Current mx.: 24 Vdc 18 Vdc to 36 Vdc 24 Vdc 10 Ah 1,5 Adc Efficiency chrger: > 80 % Output overcurrent protection: operting temperture: Acoustic lrm signl: Mechnicl Specifictions: Dimensions: Sfety: EMC: utomtic circuit breker, 15 A, ech output -10 C to +55 C (pending on Bttery) Digitl sounder type MALLORY SC x 330 x 181 mm (W x H x D) without connectors < 17 kg Preliminry EN60950 TBD Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type pge 1 of 2 Fx: +49 (0) issue dte 2014 / 04

30 24 Vdc Emergency Power Supply for Mobile Vehicle Use type number Connectors: Input: VG95234A-10SL-3PN pin ssignment: A B C 24 Vdc 24 Vdc RTN not connected, pin inserted Output: SJT00RT14-97SN014 (2x) pin ssignment: A B C D E F G H J K L M LED_A green, Voltge ok LED_A red, Filure not connected, pin inserted not connected, pin inserted not connected, pin inserted not connected, pin inserted not connected, pin inserted not connected, pin inserted pushbutton Alrm off RTN for LED s nd pushbutton 24 Vdc (lod) 24 Vdc RTN (lod) Preliminry Alrm Sounder is integrted. LED_A s (node connection) mybe directly powered by the device (build- in series resistor); pin K is the return RTN for the LED s cthode connection. Pin J : internl 1k0 pull-up-resistor to 5 Vdc; pin K is the return RTN. For ctivtion lrm off the externl pushbutton shorts pin J to return RTN pin K Grounding: one M8- bolt nerby the connectors Ask for further technicl informtion! Functionl or interfce modifictions cn be relized on request. Ech configurtion chnge cuses new type pge 2 of 2 Fx: +49 (0) issue dte 2014 / 04