OVETC-XX OTIS OVETC-XX 3.0" LED EXTENDED ARROW

Transcription

1

2 C.E. Electronics, Inc. Bryan, OH 4356 PH (49) FX (49) Ver. 2 Rel. /5/5 OTIS FOUR WIRES REQUIRED: BLUE WHITE BLACK RED - L - L2 - COMMON - V+ 3." LED EXTENDED ARROW Long life, solid state bi-color arrow for lanterns,, hour rated life. Accepts existing signals over the Otis RSL link. The unit has a double digit 2" display. It includes a bi-color arrow which is green in the up direction and red in the down with matching side bars for 8 viewing. The unit is also equipped with an arrival gong. The programming is dip switch selectable. Typical Applications Hall and car lanterns P.I. combo w/8 Viewing angle Features Bi-color 3" arrow 2" characters Solid side bar/arrow 8 viewing angle lantern year factory warranty Conforms to ADAAG 4..4 Includes gong RSL input ECA capable TO ORDER - SPECIFY RENEWAL PARTS Display board: 9366 = RED Display board: 9366 = GREEN Lens: 4-625A EXT. Lens: 4-656A NON EXT. E = EXTENDED F = FLUSH LED COLOR: "R" = RED "G" = GREEN

3 COVER PLATE 74 #6-32 ALLEN HD SET SCREWS C L 4.5" 2.".5" Ø.25" (TYP).33" C L 6." C L 4.4" REF..875" DIA (/2" KNOCKOUT) (TYP. 3 PLS) GRAIN MOUNTING PLATE.5".375" 3.25" 6.25" DETAIL.375" C L.25" 2.5" CUT-OUT & MTG. DETAIL 6 LENS NUMBER: BOARD # & REV: APPROVED BY: Signature: NOTES: #4 STAINLESS STEEL, PAN TYPE COVER, 6 GAUGE.6 VERTICAL GRAIN BACK PLATE INCLUDED Date: Company: DATE DRAWN: LAST DATE REVISED SCALE /25/6 TOLERANCE UNLESS OTHERWISE SPECIFIED: DRAWN BY: D.W.S. +.5,-.5 REQUESTED BY: TOLERANCE FOR CUTOUT (WINDOW): C.S. +.2,-. TITLE: OTIS SPECTRA SERIES SURFACE MOUNT METAL PART #: DWG. NO. 74 C.E. ELECTRONICS, INC. Bryan, Ohio 4356 (49) REV:

4 THE EEPROM IS USED TO DISPLAY DIFFERENT CHARACTERS THAN ARE RECEIVED. USE THE "OCDL.EXE" PROGRAM TO CREATE EEPROM DATA. OVETC CHART TO SELECT ADDRESS WITH DIP SWITCH VALUE JOB# GONG VOLUME R4 TOP CE366 UP GONG DOWN GONG ECA TONE PLAY GONG EEPROM U5 SPEAKER DATA BITS S TOP - L 2 - L2 3 - COM 4 - V+ DOWN ARRIVAL LANTERN UP ARRIVAL LANTERN = DIP SWITCH 8 OFF = DIP SWITCH 8 ON P JP OTIS SERIAL CONTROLLER CONNECTION BLUE WHITE BLACK RED DOWN ARRIVAL GONG/LANTERN UP ARRIVAL GONG/LANTERN = DIP SWITCH AND 8 ON GONG VOLUME CONTROL AND DIP SWITCH ARE RIGHT-ANGLE DEVICES AND ARE MOUNTED ON THE FRONT OF THE BOARD. DIP SWITCH DETAIL ADDRESS SELECTION DIP SWITCH LEGEND 6 ON OFF DEFAULT SETTINGS ON ECA/SELF-TEST ECA/GONG DIP SWITCH # OFF ON ADDRESS ADDRESS #4 ADDRESS #5 ADDRESS #6 ADDRESS #7 ADDRESS #8 ADDRESS #9 ADDRESS # ADDRESS # ADDRESS #2 ADDRESS #3 ADDRESS #4 ADDRESS #5 ADDRESS #6 ADDRESS #7 ADDRESS #8 ADDRESS #9 ADDRESS #2 ADDRESS #2 ADDRESS #22 ADDRESS #23 ADDRESS #24 ADDRESS #25 ADDRESS #26 ADDRESS #27 ADDRESS #28 ADDRESS #29 ADDRESS #3 ADDRESS #3 ADDRESS #32 ADDRESS #33 ADDRESS #34 ADDRESS #35 ADDRESS #36 ADDRESS #37 ADDRESS #38 ADDRESS #39 ADDRESS #4 ADDRESS #4 ADDRESS #42 ADDRESS #43 ADDRESS #44 ADDRESS #45 ADDRESS #46 ADDRESS #47 ADDRESS #48 ADDRESS #49 ADDRESS #5 ADDRESS #5 ADDRESS #52 ADDRESS #53 ADDRESS #54 ADDRESS #55 ADDRESS #56 ADDRESS #57 ADDRESS #58 ADDRESS #59 ADDRESS #6 ADDRESS #6 ADDRESS #62 ADDRESS #63 DIP DIP8 FUNCTION SELF-TEST MODE GONG USES BIT UP (SINGLE) AND BIT 2 DOWN (DOUBLE) GONG USES BIT 3 UP AND BIT 4 DOWN (BOTH SINGLE) ECA MODE DATE DRAWN: 9/5/5 BOARD NUMBER: 366 PRODUCT CODE VERSION BOARD VERSION CE366 DRAWN BY: REQUESTED BY: DAC MG, CS C.E. ELECTRONICS, INC. LAST DATE REVISED: APPROVED BY: - Bryan, Ohio 4356 (49) DWG. NO. REV: OVETC_ -

5 The following Otis data must be furnished at the specified addresses for the Otis Serial Indicator to work properly. The address is selected by setting DIP switches 2-7 as shown on the back of this page. The board reads the address determined by the DIP switch setting. For example, if the DIP switch is set to address 5, the board will read the bits at address 5. At DIP switch address selected by the DIP switch on the unit (Default 5): Normal Operation DIP switch puts the unit in self-test mode. DIP switch and DIP switch 8 OFF: Bit Up Gong (Single) Bit 2 Down Gong (Double) Bit 3 Up Arrival Arrow/Lantern Bit 4 Down Arrival Arrow/Lantern DIP switch OFF and DIP switch 8 ON: ECA Operation Bit Not Used Bit 2 Not Used Bit 3 Up Arrival Arrow/Lantern and Up Gong (Single) Bit 4 Down Arrival Arrow/Lantern and Down Gong (Single) DIP switches and 8 ON puts the unit in ECA Mode: Bit ECA Tone Bit 2 Play Gong Bit 3 Up Arrival Arrow/Lantern (Single Gong) Bit 4 Down Arrival Arrow/Lantern (Double Gong) The unit display can substitute different floor characters for the ones the controller sends, and it can switch between floor characters and ASCII characters for a message. To display alternative floor characters or messages, an EEPROM created using the OCDL.EXE program must be installed in the unit. Message characters alternate with floor characters every second. Messages use the two addresses following the address set by the DIP switch. DIP switch address + (Default 5): Priority Bit FSL/RFSL Fire Service Lamp Bit 2 Available Message Two 2 Bit 3 FNDG/RNDG Front/Rear Nudging 3 Bit 4 ISCL Independent Service 4 DIP switch address +2 (Default 52): Bit OLS Overload Lamp 5 Bit 2 Available Message Six 6 Bit 3 Available Message Seven 7 Bit 4 Available Message Eight 8 NOTE: If messages are not programmed in the EEPROM, these two addresses are available for other devices, such as other position indicators. { FILENAME \* MERGEFORMAT } { DATE \@ "MM/dd/yy" }