BKS. Contents Connectors and accessories. Micropulse Transducers
|
|
|
- Maude Little
- 5 years ago
- Views:
Transcription
1 Contents and accessories KS. Connector overview KS. for nalog, Pulse and SSI KS.4 and accessories for CNopen and DeviceNet KS.6 and accessories for PROFIUS-DP interface KS.8 for Profile series KS for nalog, Pulse and SSI, T-splitters, resistors for CNopen and DeviceNet, PROFIUS-DP interface for Profile series KS.
2 Summary for nalog, Pulse and SSI for CNopen for PROFIUS-DP and DeviceNet DeviceNet KS.
3 for nalog, Pulse and SSI for Series KS-S M TL5-...-S Soldered connections Straight, female KS-S M-C TL5-...-S Crimp contacts Straight, female KS-S M TL5-...-S Soldered connections Right angle, female KS-S 78M TL5-...-S Soldered connections Straight, male Ordering code KS-S M- KS-S M-C- KS-S M- KS-S 78M-00 Crimp contacts Solder connection Housing material Contacts Contact finish Cable strain relief Cable diameter min. Cable No. of wires conductor cross section Enclosure rating per IEC 6059 max mm LifY-FC-Y mm² max. 0.5 mm²/wg 0 LifY-FC-Y mm² IP 65 (when attached) max mm ZnlCu nickel plated LifY-FC-Y mm² max mm Code 00 for self-assembly (please use shielded cable). Code 05, 0, 5, 0, 5, 0 m for finished cable assembly. KS Pin assignments Pin Color YE GY PK 5 GN 6 U View of 7 N female solder side 8 WH for nalog, Pulse and SSI, T-splitters, resistors for CNopen and DeviceNet, PROFIUS-DP interface for Profile series KS.
4 /accessories for Series Micropulse and ccessories for CNopen and DeviceNet KS-S 9-00 TL5-H _-S9/S9/S94 Screw terminals KS-S TL5-H _-S9/S9/S94 Screw terminals KS-S 9-00 TL5-H _-S9/S9/S94 Screw terminals KS-S TL5-H _-S9/S9/S94 Screw terminals Ordering code KS-S 9-00 KS-S KS-S 9-00 KS-S Screw connection Housing material Contacts Contact finish Cable strain relief Cable diameter No. of wires conductor cross section Enclosure rating per IEC 6059 Knurled coupling ring Finish O-ring Resistor Coding Socket on transducer max mm max mm max mm max mm KS-S 9-00/-S 9-00/ -S 94-00/-S95-00 KS-S 94-R0 Pin assignments Pin Signal Pin Signal CN_GND +4 V GND (0 V) View of female coupling side 4 CN_HIGH 4 5 CN_LOW 5 Ohms CNopen DeviceNet Socket Power supply for DeviceNet: KS-S48-5-CP-... page KS.7 KS.4
5 and ccessories for CNopen and DeviceNet KS-S 9-T TL5-H _-S 9 KS-S7-9-PC-..._ TL5-H _-S9/S9/S94 KS-S5-9-PC-... TL5-H _-S9/S9/S94 KS-S 94-R0 TL5-H _-S9/S9/S94 KS-S 9-6/GS9- TL5-H _-S9/S9/S94 T-splitter, F, M Termination resistor, male Male/female extension KS-S 9-T KS-S7-9-PC-... KS-S5-9-PC-... KS-S 94-R0 KS-S 9-6/GS9- P Ni TPU.5 µm Ni HR * * only for TL5-H...-M-P/-S mm.5 µm Ni 0 = Length m 0 = Length 0 m mm.5 µm Ni 0 = Length m 0 = Length 0 m IP 68.5 µm Ni Ohms mm /WG.5 µm Ni / 0 = Length m 0 = Length 0 m KS for nalog, Puls and SSI, T-splitters, CNopen and DeviceNet, PROFIUS-DP interface for Profile series Please order the clear view cover as an extra! Order designation: TL5--CP0-K KS.5
6 and accessories for PROFIUS-DP /accessories for Series KS-S 0-00 TL5-T...-S0 KS-S TL5-T...-S0 KS-S TL5-T...-S0 KS-S TL5-T...-S0 Ordering code KS-S 0-00 KS-S KS-S KS-S Screw connection Housing material Contacts Contact finish Cable strain relief Cable diameter No. of wires conductor cross section Enclosure rating per IEC 6059 Knurled coupling ring O-ring Resistor Coding Socket on transducer max mm max mm max mm max mm Pin assignments TL5-T -M- _ -_-S0 Control and data signals Supply voltage and shield Socket on transducer Data GND RxD/TxD-N () RxD/TxD-P () VP +5 V +4 V 0 V (GND) Ground PROFIUS-DP Shield Supply 5-pin 4 5 / -pin 4 PROFIUS-DP KS.6
7 and accessories for PROFIUS-DP KS-S0/GS0-CP- TL5-T...-S0 Male/female extension KS-S0-CP- TL5-T...-S0 KS-S05-CP- TL5-T...-S0 KS-S 05-R0 TL5-T...-S0 Termination resistor, male KS-S 48-5-CP- TL5-T...-S0 Supply voltage -pin, female KS-S0/GS0-CP- KS-S0-CP- KS-S05-CP- KS-S 05-R0 KS-S 48-5-CP mm /WG 8 / 00. = Length 0. m 0 = Length m 0 = Length 0 m 0.64 mm /WG = Length 0. m 0 = Length m 0 = Length 0 m 0.64 mm /WG = Length 0. m 0 = Length m 0 = Length 0 m per PROFIUS-DP * 0.5 mm²/wg 4 * also for DeviceNet page KS.4 0 = Length m 0 = Length 0 m KS for nalog, Pulse and SSI, T-splitters, resistors for CNopen and DeviceNet, PROFIUS-DPinterface for Profile series Please order the clear view cover as an extra! Order designation: TL5--CP0-K KS.7
8 for Profile series for Series KS-S5-PU- TL6- _-S5 KS-S6-PU- TL6- _-S5 KS-S5-00 TL6- _-S5 8-pin, Straight, female 8-pin, Right angle, female 8-pin, female Ordering code KS-S5-PU- KS-S6-PU- KS-S5-00 Screw terminal Housing material Contacts Contact finish Cable strain relief Cable diameter Enclosure rating per IEC 6059 Knurled coupling ring Finish O-ring.5 µm Ni.5 µm Ni max mm Cable No. of wires conductor cross section Conductor configuration Outer diameter Min. bending radius length in ordering code! 0 = Length m 0 = Length 0 m 5 = Length 5 m 0 = Length 0 m 5 = Length 5 m Molded-on mm LIYY-CFY mm 6.6 ±0. mm dynamic 4 D, static D Pin assignments Pin Color YE GY PK 4 RD 5 GN 6 U View of 7 N female 8 WH dapter KS-S5 to KS-S Ordering code: KS-S5/GS-PU-00. KS.8
IDC Field Wireable eurofast & picofast Connectors
Advanced Connection Solutions for Manufacturers Worldwide! IDC Field Wireable eurofast & picofast Connectors picofast Field Wireable IDC Connector eurofast Field Wireable IDC Connector Overview Connection
Section 2. Connectors Field attachable
E L E C T R O N I C C O N N E C T O R S Section 2 Connectors Field attachable 89 SAL M8x1 Connectors Field attachable Nomenclature S A L - 8 - R K W C 4 - L 5,5 SAL Sensor Actor Line Installation size
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
Connecting cables for valves, Sub-D socket Type codes
Connecting cables for valves, Sub-D socket Type codes K MP3 K Connecting cable on the left, field device side MP3 Sub-D socket Number of pins/wires, left 9P 25P 9-pin 25-pin Number of pins/wires, right
EPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
FACTORY AUTOMATION QUICK START GUIDE IC-KP-*
FACTORY AUTOMATION QUICK START GUIDE IC-KP-* IDENTControl units With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery for Products
Sensor Connectivity Introduction Global Plus Connector Cables Multi-Connector Blocks. Product Selection Guide...
.0 Introduction Product Selection Guide.................................... Product Description....................................... Standards and Certifications................................ Product
M8/M12 Connector. PCA/EX9/EX500 Series. Reduction in wiring time. Conforming to IEC Fieldwireable Connectors
/ Connector /EX9/EX00 Series Fieldwireable Connectors Reduction in wiring time The man-hours can be decreased because no exclusive tools (such as solder, crimped terminal) are required.also, the wire length
Non-Contact Safety System CES-AZ
, 0 M 8 8,, 7,,,, 0 0 7 0 7 Mounting plate CEM For read head CEM-A-LE0... and actuator CEM-A-BE0... Material stainless steel Mounting plate EMP-L-CEM0 For read head CEM-A-LE0... 9 8 0 8 M - x, 7 Mounting
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications
Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications Type 0981 ENC 100 RJ45/M12 adaptor, female receptacle connector M12, D coding, chassis side thread PG 9, RJ45 female connector,
Bus Interface Connector System Versions for Bitbus, CAN -Bus, Interbus -S (field bus) and Profibus
Bus Interface Connector System Versions for Bitbus, CAN -Bus, Interbus -S (field bus) and Profibus S 48 General The ERbic line of universal bus interface connector systems is versatile, compact and easy
Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>
96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5
TURCK Industrial Connectivity Products
TURCK Industrial Connectivity Products multibox eurofast Low Profile Junction Boxes Single Output per Port Rugged Plastic Housing Available with or without LEDs M23 Quick Disconnect Integral Home Run Cable
M8, M12, 3-, 4-, 5-, 8-, 12-pin, LED, shielded
ACCESSORIES M8, M12, 3-, 4-, 5-, 8-, 12-pin, LED, shielded ipf electronic gmbh Kalver Straße 25-27 58515 Lüdenscheid Germany Tel +49 2351 9365-0 Fax +49 2351 9365-19 111 1000 CABLE SOCKETS NOTES 112 ipf
TURCK Industrial Connectivity Products
TURCK Industrial Connectivity Products multibox eurofast Junction Boxes, 4-Ports Rugged Plastic Housing with Flush Connectors Available with or without LEDs Quick Disconnect or minifast Connector 4-, 2-Signals
MDT 2000 Magnetostrictive linear position transducer
Description MDT 2000 is a magnetostrictive linear displacement transducer. The position value is obtained by measuring the flight time elapsed between an electrical pulse, sent in a special waveguide,
For situations susceptible to interference and safety-related applications
IEC 60947-5-2 Product description Multi-pole shielded circular connectors. Design according to DIN 43651, all-metal construction, used for control and measurement systems. Connection of shielded cables
BTL6-A_10-M -A1-S115. Data Sheet. english
BT6-A_10-M -A1-S11 english Data Sheet Balluff GmbH Schurwaldstrasse 9 76 Neuhausen a.d.f. Germany Phone +49 (0) 71 8/1-0 Fax +49 (0) 71 8/0 10 Servicehotline +49 (0) 71 8/1-70 E-Mail: balluff@balluff.de
DSI-4. DMX Optically Isolated 1x4 Splitter. D Series. DSI_4 Users Manual r3.lwp copyright 2009, 2010, 2011 ELM V. T. Inc.
DSI-4 DMX Optically Isolated 1x4 Splitter D Series 1 Table Of Contents IMPORTANT SAFEGUARDS... DSI-4 OVERVIEW... CONNECTION... PCB BLOCK DIAGRAM... SERVICING... TROUBLESHOOTING... SPECIFICATIONS... 2 3
Miniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
Quick Connectors for PROFIBUS SUBCON-PLUS-PROFIB/...
Quick Connectors for PROFIBUS SUBC-PLUS-PROFIB/.... Description The new SUBC-PLUS-PROFIB/... SUB-D series has been specifically designed for use in PROFIBUS systems up to 2 Mbps. It enables convenient
Adapter Kit - QSI Electronics to G-Series Meter Installation Instructions
Adapter Kit - QSI Electronics to G-Series Meter Installation Instructions These installation instructions cover the adapter kit installation of the QSI1, QSI2 and QSI3 versions of communications electronics
PHOENIX CONTACT - 11/2007. This data sheet is only valid in association with the IB IL SYS PRO UM E user manual.
INTERBUS Inline Bus Coupler; Remote Bus Connections Via D-SUB Connectors REMOTE IN BA UL RD RC DSUB LD AUTOMATIONWORX Data Sheet 6362_en_03 PHOENIX CONTACT - 11/2007 REMOTE OUT Description The bus coupler
Accessories. Accessories. Accessories. Pepperl+Fuchs Group. Ukraine: Copyright Pepperl+Fuchs
Accessories Accessories Accessories 0 970 USA: + 0 86 000 Germany: +9 6 776- Ukraine: +8 0-900 www.pe-ko.com.ua Contents, Accessories Accessories 0. Connectors, Cordsets, Splitters Sensor-actuator cable
M12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET
M12 Connectors Application Advantage Shielded design ETHERLINE Ethernet Cable, Connectors & Tools M12 Field Wireable Connectors Male Female Temperature Range: Max. 85 C Nominal Voltage: Nominal Current:
M23 Connectors and cables
Contents Product Description: SAI M23 Connectors.2 Contact assignment.7 Technical data.8 Overview.10 M23 connector for signal transmission.12 M23 connector for power transmission.18 Moulded M23 cables.22
TURCK Industrial Wiring Solutions
4-port, Snap Lock, 10-48 VDC multibox picofast Junction Box, 4-port Snap Lock or Threaded Connections Available with or without LEDs TURCK Industrial Wiring Solutions Quick Disconnect or Integral Home
VersaMax IP Input Module
Module is used to accept digital input signals. Module Specifications Housing dimensions (width x height x depth) Connection style Operating temperature Storage temperature Operating/storage humidity 60mm
PROFIBUS Junctions, Connectors, Accessories
Data heet PROFIU Junctions, Connectors, ccessories PROFIU P Junctions Connectors ccessories PROFIU DP Junctions Connectors ccessories PROFIU DP/P ccessories P R O F I PROCE FIELD U U PROFIU Junctions,
MICROPULSE Generation 7 Analog Rod-Style Transducers. The global standard for analog position sensing
MICROPULSE Generation 7 Analog Rod-Style Transducers The global standard for analog position sensing Generation eration 7 The global standard for analog position sensing Trusted around the world Balluff
Standard Series Standard
Standard Series Standard Technical Data Coupler connector, cable connector and coupler connector rectangular housing Locking screw connection Protection IP 50 to IP 54 with conexil in the housing, flat-gasket
fischer connectors 4032 Series HIGH-PERFORMANCE IN A VERSATILE PACKAGE MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION INSTRUMENTATION Edition 1.
fischer connectors 4032 Series Plastic connectors Edition 1.2 MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION HIGH-PERFORMANCE IN A VERSATILE PACKAGE INSTRUMENTATION PERFECT PACKAGE www.fischerconnectors.com
VARIOSUB D-SUB 25 Contact Inserts, Sleeve Housings
Contact Inserts, Sleeve Housings Introduction VARIOSUB is a range of plug connectors specially designed for signal and data technology in an industrial environment with high degrees of protection, temperatures
M12x1 Circular Connectors
M12x1 Circular Connectors Agenda 1. Introduction M12x1 Circular Connectors 2. M12x1 X-coded 3. M12x1 D-coded 4. Accessories and Nomenclature 3 / 2015 Product Presentation M12x1 Page 2 M12x1 Circular Connectors
1/2 microfast Connectivity
Part Number Keys Cordsets Receptacles Field Wireables Adapters E2 E4 E8 E16 E17 microfast Features y 2 to 6 pin y Up to 4 Amp, 250 Volt rated y IEC IP67 protection y NEMA 6P rated y Low current AC applications
Your Benefits at a Glance
Sensor-actuator cable Product Diversity Always the Right Connection Pepperl+Fuchs offers a comprehensive range of sensor-actuator cables for machine and plant installations. In addition to the common M8,
IEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
BVS UR E Ordering code: BVS001H
BVS UR-3-101-E Ordering code: BVS001H Vision sensor BVS-E Universal PNP (2x) 1) Teach reference image, 2) Power, 3) Output 1 active, 4) Output 2 active, 5) Connection with PC, 6) Sharpness Characteristic
CONNECTORS & RECEPTACLES
STRAIGHT CORD PLUG with Extended Barrel TYPE 12BL6M TYPICAL Male plug with ground key-rib. Nickel-plated diecast handle. Contact friction coupling. Flexible black strain relief. Heavy duty cable clamp.
Item No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
DIN Molded Cable Assemblies
DIN 43650 Telephone (973) 586-500 FAX (973) 596-590 DIN 43650 8mm For Solenoid Valve Applications Black PVC Cable & Connector DUAL JUMPED GROUND PINS Molded cable assemblies can be mounted with cable exiting
Sensor Actuator Interface. Catalogue
C T L O G U E 8 2011 2012 ensor ctuator Interface Catalogue CTLOGUE 8 ensor ctuator Interface Contents ensor ctuator Interface Introduction ensor and actuator cables Fieldbus, data cables and accessories
PHOENIX CONTACT
Fast connection connector for PROFIBUS systems Data sheet 101610_en_07 PHOENIX CTACT 2011-11-17 1 Description The D-SUB series SUBC-PLUS-PROFIB is specially designed for use in PROFIBUS systems up to 12
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
FISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
Technical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
Contents 9-1. Network Media
Contents General Information Quick Selection Guide... page 9--2 Introduction... page 9--3 Ethernet Media Cordsets & Patchcords Cable Spools... page 9--4 Cordsets & Patchcords... page 9--5 Field Attachable
esimot - Accessories esimot XL 1x230V AC 3x400V AC 0,8... 3,2kW S3 esimot SL 3x400V AC 2,9... 4,4kW S3 esimot V DC
esimot - Accessories PC-Software/Programming kits Interface converter Gear boxes Power supplies Line filters Connection boxes Assembled cables Controls esimot SL 3x400V AC 2,9... 4,4kW S3 esimot XL 1x230V
Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
UHV Feedthrough, Conflat compatible flange. UHV female cable assembly, , PEEK connector and Kapton insulated coaxial
Coax-D Subminiature-D Coax-D Subminiature-D Accu-Glass 1, 3 and 5 Pin Feedthroughs UHV Feedthrough, 100520 Conflat compatible flange UHV female cable assembly, 100640, PEEK connector and Kapton insulated
Ethernet Media. Technical Data. Cable Spools 2. Cordsets & Patchcords 5. Patchcords & Field Attachables 12
Technical Data Ethernet Media Bulletin Numbers 585, 585A, 585BP, 585BT, 585BX, 585BZ, 585D, 585J Topic Page Cable Spools Cordsets & Patchcords 5 Patchcords & Field Attachables Cable Spools Unshielded Twisted
Datasheet. Datasheet-No Type: RS(W)T(S) - RK(W)T(S) -.../ M. Page: 1 of 7
The information/details in this datasheet merely contain general descriptions or performance factors which, when applied in an actual situation, do not always correspond with the described form, and may
Online data sheet. S32B-3011EA S300 Mini Remote SAFETY LASER SCANNERS
Online data sheet S-0E S00 Mini Remote C D E F I J K L M N O P Q R S T Ordering information Tpe Part no. S-0E 0 Usage Other models and accessories www.sick.com/s00_mini_remote Detailed technical data Features
Han PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS
CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS FOR USE WITH: HAMMOND Organ Models L-100, M-100 Series, M-l, M-2, M-3 LESLIE Speaker Models 760, 770, 825 KIT CONTENT Console Connector Assembly 043075
Fieldbus System: Profibus. Profibus Contents. Product topology 20. IO-Link modules 22, 26 Modules 23. Power cables 28 Power connectors 34 Power tee 36
Fieldbus Systems Contents Product topology 0 O-Link modules, 6 Modules Power cables 8 Power connectors Power tee 6 Bus cables 0 Bus plugs Bus connectors Flange plug and socket Terminating resistor 6 8
PA Physical Media Connectivity
PROFIBUS Cordsets Receptacles Terminating resistors Tees Field Wireables P24 P21 P28 P30 P34 Features Cable that meets the requirements of ISA/SP 50 and PROFIBUS-PA requirements for Type A Cable All cables
Profi le PF. Contents. PF General data 106 Analog interface 108 IO-Link V Floating magnet 112 Captive magnet 114
Contents PF 106 Analog interface 108 IO-Link V1.1 110 Floating 112 Captive 114 www.balluff.com 105 Low-profile The robust design, high degree of protection and simple installation of Balluff Micropulse
BTL7-A/C/E/G5 -M -K(8)-SR32/SR115/K User's Guide
User's Guide english www.balluff.com 1 Notes to the user 5 1.1 Validity 5 1.2 Symbols and conventions 5 1.3 Scope of delivery 5 1.4 Approvals and markings 5 2 Safety 6 2.1 Intended use 6 2.2 General safety
Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series CONNECTOR MB-0281-3
SAC-5P-MS/ 1,0-920/FS SCO
Extract from the online catalog SAC-5P-MS/ 1,0-920/FS SCO Order No.: 1518274 Bus system cable, DeviceNet/CANOpen, 5 pos., PUR halogen-free violet, shielded, straight M12 SPEEDCON connector on straight
ERbic. Bus Interface Connector System Catalog E /06 Edition 4
ERbic Bus Interface Connector System www.erni.com Catalog E 074441 01/06 Edition 4 www.erni.com 1 www.erni.com 2 Katalog Catalog D E 074441 074440 01/06 Ausgabe Edition 4 3 www.erni.com Table of Contents
BTL7-S5 (B) -M -P-S32/S115/S147/KA /FA User s Guide
User s Guide english www.balluff.com 1 Notes to the user 5 1.1 Validity 5 1.2 Symbols and conventions 5 1.3 Scope of delivery 5 1.4 Approvals and markings 5 1.5 Abbreviations 5 2 Safety 6 2.1 Intended
ODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic
ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently
MAGNETOSTRICTIVE TRANSDUCER
MGNETOSTRICTIVE TRNSDUCER MB Series Content: Technical Data...2 Technical Drawing...3 Electrical Connection & ccessories...4 Order Code...5 Options & ccessories...6 Key-Features: - vailable measurement
GSV-1A4 M12/2 M12/2. Highlights
GSV-1A4 M12/2 M12/2 Highlights Input sensitivity: 2mV/V; 4mV/V, 2 mv/v, 1mV/V, 0.5mV/V configurable via jumpers Output signals ±10V AND 12mA+-8mA on 15 pin Sub-D Integrated half and quarter bridge completion
Accessory Kit for all Designs of Hand-held Pendant Station
Overview of accessories for hand-held pendant station kits Accessories for kit Suitable for all designs Hand-held pendant stations HBA/HBM Hand-held pendant stations HBL EMERGENCY- STOP device Pushbutton
Accessories Fieldbus Box
Power cables, sensor cables, connection cables and further accessories see the EtherCAT Box chapter from page 514 Pre-assembled cables for fieldbus components include a wide range of cable assemblies.
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
ORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201
HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36
(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
Ethernet Media. Technical Data. Bulletin Numbers 1585, 1585A, 1585BP, 1585BT, 1585BX, 1585BZ, 1585D, 1585J
Technical Data Ethernet Media Bulletin Numbers 585, 585A, 585BP, 585BT, 585BX, 585BZ, 585D, 585J Topic Page Summary of Changes Introduction Cable Spools Unshielded Twisted Pair Shielded Twisted Pair (Foil
THERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
BTL7-A/C/E/G _-M -A/B/Y/Z(8)-S32/S115/S135/S140 BTL7-A/C/E/G _-M -A/B/Y/Z(8)-KA /FA User s Guide
BTL7-A/C/E/G _-M -A/B/Y/Z(8)-S32/S115/S135/S140 BTL7-A/C/E/G _-M -A/B/Y/Z(8)-KA /FA User s Guide english www.balluff.com 1 Notes to the user 5 1.1 Validity 5 1.2 Symbols and conventions 5 1.3 Scope of
BNI PBS Z001 BNI PBS Z001 BNI PBS Z001 BNI PBS Z001 Short Guide
BNI PBS-104-000-Z001 BNI PBS-302-000-Z001 BNI PBS-501-000-Z001 BNI PBS-502-000-Z001 Short Guide English 1 2 3 4 Notes to the User 3 1.1 About this guide 3 1.2 Structure of the guide 3 1.3 Typographical
Extract from new. Device Connectivity catalogue. HARTING har-flex. People Power Partnership
Extract from new Device Connectivity catalogue HARTING har-flex People Power Partnership . har-flex CONNECTORS The continuous scalability by an even number of contacts, i.e. from 6 to 100, of the HARTING
Application Coding Cable diameter Color Part No. Std. Pack Part No. Std. Pack. Female connector. gray black gray black gray black. turquoise.
.( Connectors Connector for cables of Ø 6 10 and 10 14 mm With screw connection 2) for rigid, of 0.75 m 2. Unassembled with cable gland 1) and locking device. With crimp contacts for of 0.75 m 2. Unassembled
ODU-MINI-SNAP. Series S - IP50 and IP68 FP-Locking Concept Keying with Insulation Body. Series S
OU-MINI-SNAP Series S - IP and IP68 FP-Locking Concept Keying with Insulation Body Series S OU-MINI-SNAP Series S The Push-Pull Locking Principle: FP Locking roove Conical Sleeve Locking Fingers Outer
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
BTL7-A/C/E/G5 -M -H/W(8)-S32/S115/KA /K User's Guide
S32 BTL7-A/C/E/G5 -M -H/W(8)-S32/S115/KA /K User's Guide english www.balluff.com BTL7-A/C/E/G5 -M -H/W(8)-S32/S115/KA /K 1 Notes to the user 5 1.1 Validity 5 1.2 Symbols and conventions 5 1.3 Scope of
0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY
![0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY](/thumbs/83/88977257.jpg "0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY")
ONLINE CATALOG SWITCHCRAFT, INC. N. Elston Ave. Chicago, IL 00 77 79-700 FAX: 77 79-19 www.switchcraft.com EN MINI WEATHERTIGHT CONNECTOR SERIES EN CORD CONNECTOR 1.8 [9.8] 0. REF 0.70 dia. [17.8] PIN
BCC Part Number Matrix Breakdown Balluff cables, cordsets & connectors for industial automation equipment
BCC Part Number Matrix Breakdown Balluff cables, cordsets & connectors for industial automation equipment M8 Nano, M12 Micro - Single & Double-Ended Cables BCC M415 - M424-3A - 304 - VX44T2-020 - C008
AxisPro Servo conversion instructions How to get servo valve-like performance from a servo-performance proportional valve
White Paper xispro Servo conversion instructions How to get servo valve-like performance from a servo-performance proportional valve Per Danzl Global Product Manager - Industrial Valves The xispro proportional
QUICK START GUIDE IC-KP2-*
FACTORY AUTOMATION QUICK START GUIDE IC-KP2-* IDENTControl Compact control interfaces With regard to the supply of products, the current issue of the following document is applicable: The General Terms
Interfaces Service and Field
Interfaces Service and Field Front Panel Interfaces Interfaces Service Receptacles Cable Entry Systems 02 TRANSFORMATOREN 03 MODLINK MSDD THE CONNECTION TO THE OUTSIDE WORLD A safe bet MARKET REQUIREMENTS
Male connector; 6-pole; pin spacing 3.5 mm / in; 100% protected against mismating
Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Item Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Marking Business data Supplier
Key features: M5 Series. Buccaneer. Full Contact Diagrams Page 120
The most compact connector type in the MSeries range, Bulgin s waterproof M5 sensor connectors come in straight and angled forms with or overmolded cable option s and a variety of panel mount receptacles.
PROFIBUS Contents. Product Topology Profibus I/O Blocks Cordsets Field Attachables Accessories
In use for 20 years, Profibus stands for well engineered fieldbus technology and reliably supports modern manufacturing. As a full-service provider, Balluff offers a wide range of components for optimum
Information. EX260 Integrated Type (For Output) Serial Transmission System 5 Port Solenoid Valve mm. Series SY/SV/VQC/S0700
Information Akihabara UX F, --, Sotokanda, Chiyoda-ku, Tokyo 0-00, JAPAN URL http://www.smcworld.com 00 SMC Corporation All Rights Reserved 09-E6 -N Printing OT 0KS EX60 Integrated Type (For Output) Serial
BTL5-F1 -M -A/B/Z-S115. User s Guide. english
english User s Guide Balluff GmbH Schurwaldstrasse 9 73765 Neuhausen a.d.f. Germany Phone +49 (0) 71 58/1 73-0 Fax +49 (0) 71 58/50 10 Servicehotline +49 (0) 71 58/1 73-3 70 E-Mail: balluff@balluff.de
Electrical adapters, Sub-D socket, 9-pin Technical data
Electrical adapters, Sub-D socket, 9-pin Fieldbus adapter FBA Fieldbus adapter Sub-D, 9-pin on M12 or screw terminal, for CANopen and DeviceNet General technical data Electrical connection 1 Straight socket,
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
CW INDUSTRIES IDC SELECTION GUIDE
CW INDUSTRIES IDC SELECTION GUIDE An ISO Company that Delivers World Class Quality About CW IDC Connectors CW mass terminated Insulation Displacement Connectors are specifically designed to provide a reliable
Standard Buccaneer BUCCANEER FOR POWER
IP8 rating tested at 1.05kg/sq cm (15lb/sq in) 10m depth for weeks and.8kg/sq cm (10lb/sq in) 100m depth for hours IPK, Tested in accordance with DIN 0050/Part IPkk Water and dustproof to IP8 when mated,,,,,,
CDN220 HIGH DENSITY I/O ADAPTER USER GUIDE
CDN220 HIGH DENSITY I/O ADAPTER USER GUIDE 13022001 (c) Copyright DIP Inc., 1996 DIP Inc. P.O. Box 9550 MORENO VALLEY, CA 92303 714-924-1730 CONTENTS CDN220 PRODUCT OVERVIEW 1 CDN220 INSTALLATION 2 POWER
Mass Flow Meter (MFM)
Mass Flow Meter (MFM) Type 800 can be combined with Nominal flow ranges from 0 l N /min up to 00 l N /min High accuracy Fast response time Protection class IP Optional: Fieldbus interface Type 89 Multichannel
picofast 4 - Branch Molded Junctions, Standard Wiring
picofast 4 - Branch Molded Junctions, Standard Wiring Combine 4 Sensors into One Cable Tough Polyurethane Construction For 3-wire DC Sensors or Switches Application Specifications Wiring Diagram Housing
BTL5-P/I/L1_-M/U -K-SR 32/K. Technical Description User's Guide. english
BTL5-P/I/L1_-M/U -K-SR 32/K english Technical Description User's Guide Balluff GmbH Schurwaldstrasse 9 73765 Neuhausen a.d.f. Germany Phone +49 (0) 71 58/1 73-0 Fax +49 (0) 71 58/50 10 Servicehotline +49