Sub-miniature D Type Feedthroughs on CF Flanges 9to300pins,40CFto160CF. Sub-miniature D type Feedthroughs on KF and ISO-K flanges Sub-D weldables
|
|
- Britney Jenkins
- 6 years ago
- Views:
Transcription
1 SUB MINIATURE D S Sub-D Feedthroughs, Connectors, Pins& Sub-D. SUB-D: FLANGES -> Page. Sub-miniature D Type Feedthroughs on Flanges to00pins,0to0.sub-d: &ISOFLANGES Sub-miniature D type Feedthroughs on and flanges Sub-D weldables ->Page.. SUB-D: SPECIAL ASSEMBLIES -> Page. Multiple Feedthrough Flanges, and custom. SUB-D: HIGH DENSITY -> Page. High Pin Density Sub-D Feedthroughs PinsandPinsinstandardshell. SUB-D: COMBINATION S -> Page. Combination Sub-D Feedthroughs and Co-axial types. SUB-D: UHV SOCKETS -> Page. UHV PEEK and Ceramic Plugs and Sockets.SUB-D:HV&AIRSOCKETS High Vacuum Plugs and Sockets Air Side Sockets ->Page.. SUB-D: CRIMP PINS -> Page. Crimp Pins for Sub-miniature D plugs and sockets. SUB-D: SPECIAL SOCKETS -> Page. Sockets for Special Sub-Minitaure D Feedthroughs High density and ial Combination types. SUB-D: THERMOCOUPLE -> Page. Sub-miniature D Feedthroughs for use with K type thermocouples. SUB-D: READY MADE CABLES -> Page. Sub-D compatible ready made In-vacuum cables -.-
2 Sub-D. SUB-D FLANGES Sub-miniature D Type Feedthroughs on Flanges to00pins,0to0 Electronics industry standard Sub-miniature D system,andwayfeedthroughson0flange Multiple and custom Feedthrough flanges UHV PEEK, Ceramic and Air Side sockets General Specifications Sub-Miniature D Compliance DIN, MIL-C-0 Pin-ø.0mm Pin material Gold plated NiFe Seal Glass Ceramic Flange Stainless Steel L Test Voltage 00V DC Max. Current A per pin Cont. Current A per pin, all pins loaded Temp. -00 C to 0 C Leakrate <x - mar-l/she SIZE Sub-D Feedthroughs on Flanges 00V,uptoAmpsperPin NO. OF PINS PART NUMBER 0 -D0-C0 0 -D-C0 0 * -D-C0 -D-C -D-C 0 -D0-C 0 -D-C D0-C0 * uses special socket connector on vacuum side- page. 0,00,00,00,00 -,00.00,00,00 SIZE Multiple Sub-D Feedthroughs on Flanges 00V,uptoAmpsperPin NO. OF PINS PART NUMBER x D -D-C-,00 x D -D-C- x D -D-C-,00,00 -D x D -D-C0-0 x D0 -D0-C0-0 x D -D-C0-0 x D0 -D0-C0- other combinations on request, see page. -D-- -D-0- We offer a comprehensive range including unique products: -,and Pinson0-0Pinson - Pinson/Pinson0 -HighDensityversionswithandpins Connectors: Page....Crimp Pins: Page...Ready made : Page...
3 SUB-DONANDISO. Sub-miniature D type Feedthroughs on and Flanges Sub-D Sub-D weldable versions Flangedversionswithand Weldable versions suitable for TIG welding Specialtypese.g.pinsonaflangeandpinson 0.(For these versions vacuum side connectors without the mounting screws are required(see page), standard air side connectors will fit.) General Specifications Sub-Miniature D Compliance DIN, MIL-C-0 Sub-D Feedthroughs on Flanges 00V,uptoAmpsperPin Pin-ø Pin material Seal Flange Test Voltage Max. Current Cont. Current Temp. Leakrate.0 mm Gold plated NiFe Glass Ceramic Stainless Steel 00V DC A per pin A per pin, all pins loaded -0 C to 00 C(limited by flange) <x - mbar-l/she SIZE NO. OF PINS PART NUMBER * -D0-K 0 -D0-K0 0 ** -D-K0 0 -D-K0 0 ** -D-K0 -D-ISO 0** -D0-ISO 0 -D-ISO D0-ISO0 * uses small"sx"-type socket connector- page. 0,00 0,00,00,00,00,00,00,00,00 Components of a complete system: - feedthrough -connector -pins - housing with strain relief -cable ** uses small"s"-type socket connector- page. Multiple Sub-D 's on Flanges 00V,uptoAmpsperPin SIZE NO. OF PINS PART NUMBER x -D-ISO-,00 x -D-ISO- x -D-ISO-,00,00 0 x -D-ISO0-0 x0 -D0-ISO0-0 x -D-ISO0-0 x0 -D0-ISO0- Sub-D Weldables in all sizesfromto0pins Height General Specifications Weldable Sub-D mm Sub-D Feedthroughs WELDABLES 00V,uptoAmpsperPin Standard welding Material Leakrate TIG without filler Stainless Steel <x - mbar-l/she NO. OF PINS SIZE(mm) PART NUMBER.x -D0-SS.x -D-SS 0,00,00 x -D-SS,00 Please note: Welding Sub-D Feedthroughs requires care and experience! Damage to the Feedthroughs during welding is not covered by the warranty. We are happy to offer complete assemblies at competitive prices. x0 -D-SS 0 x -D0-SS non-magnetic versions on request,00,00...connectors: Page...Pins: Page...Ready Made : Page
4 Sub-D. SUB-D SPECIAL ASSEMBLIES Multiple Feedthrough Flanges, and Custom Standard or custom flanges In-house manufacturing for fast delivery and competitive prices Allectra can produce drawings for approval or we can work with customer drawings. Titanium body Feedthroughs on Titanium flanges to special order Possible Feedthroughs Possible Flanges Flange materials StandardLeakCheck Specifications for Sub-D, ial and all other Feedthroughs Combinations with Fibreoptic or viewports,,, ISO-F, JIS, ASA and custom flanges Adapter flanges SS, L, LN, 0, Titanium <x - orx - mbar-l/she depending on flange Multiple Sub-D Feedthroughs on Standard Flanges Examples of combinations of Sub-Ds SIZE NO. OF PINS PART NUMBER 0 (x ) -D0-ISO0-0 (x+x) -D0--D--C0 0 (x) -D-C0- Multiple Sub-D Feedthroughs on various Flanges Sub-D combined with other feedthroughs SIZE NO. OF PINS PART NUMBER 0 + BNC -D0-BNC-C0 0 + xbnc -D0-BNC--C0 Plate x + x SPECIAL Three examples of special arrangements Left: -pin Sub-D and floating Shield SMA on 0 Top: Various Sub-D Feedthroughs and tapped holes on an0 Right: Custom Rectangular Flange with Sub-D type Feedthroughs General Specifications Titanium Sub-D Flange and Housing Pins Titanium WCu(non-magnetic) Titanium Feedthroughs with Titanium flanges are available on request. If zero magnetism is an issue, they might be the solution. Please enquire. Sub-D Feedthrough on 0 flange Titanium Flange SIZE NO. OF PINS PART NUMBER 0-TI -D0-C0-TI Weldable Sub-D: Page...Connectors: Page.+... Pins: Page.
5 High Density Sub-D SUB-D: HIGH DENSITY. Sub-D andpinsinastandardshell High density Sub-D Connectors offer more pins on the same shellsize:insteadofpins,pinsfitinthesamespace. Andinsteadof0pins,pinsarepossible.A-row/-row pin arrangement with reduced pin diameter makes this possible. For the Vacuum side PEEK connectors are available. General Specifications HIGH DENSITY SUB-D Compliance DIN part, MIL-C-0 Sub-D Feedthroughs on Flanges, HIGH DENSITY Pin-ø 0. mm Pin material Gold plated NiFe Seal Glass Ceramic Flange Stainless Steel L Test Voltage 00V DC Max. Current A per pin Cont. Current.A, all pins loaded Temp. -00 C to 0 C Leakrate <x - mbar-l/she SIZE NO. OF PINS PART NUMBER WELD -HD-SS 0 -HD-C0 0 -HD-K0 0 -HD-K0 x() -HD-C- x() -HD-C- WELD -HD-SS -HD-C 0 -HD-C0,00,00,00,00,00., x() -HD-C0-,00 ForHDConnectors,onlyonetypeofPinis available. Therefore these connectors INCLUDE the required amount of Pins. Sub-D High Density CONNECTORS AIR/ VACUUM Spare Pins and Male Pins are available. NO. OF PINS PART NUMBER AIR -FSH-AIR,00 HV/ UHV* -FSH-PK,00 General Specifications HIGH DENSITY PINS Pin-ø 0. mm Cable diameter mm max(awg) Material phosphor bronze(female) Cu-Alloy(male) Contact finish hard-gold-plated over Nickel AIR -FSH-AIR * -FSH-PK *):/offcrimppinsareincluded! Sub-D High Density CRIMP PINS,00,00 NO. OF PINS PART NUMBER FEMALE -PINFHD- FEMALE -PINFHD-,00,00 MALE -PINMHD- MALE -PINMHD-,00,00 High Density Pins, Male and Female. Asacomparison,aStandardPinisshownon the left. Air Side Connector. The connector is solder type...vacuum Housings: Page...Ribbon cable: Sec...Crimp tools: Page
6 Sub-D. Combination Sub-Ds: SUB-D POWER & COAXIAL, ial and Standard Pin Feedthroughs Combination Feedthroughs offer a mixture of Pins, ial Pins and Standard Pins in one shell. The Pins are ideal for heater applications. :Versionswith,andPinsarenow available! Please ask for further details. General Specifications COMBINATION POWER SUB-D Compliance DIN, MIL-C-0 Standard Pin-ø.0 mm Pin-ø. mm Pin material Gold plated NiFe Seal Glass Ceramic Flange Stainless Steel L Test Voltage 00V DC Max. Current Pin: 0A Max Current Standard Pin: A Temp. -00 C to 0 C Leakrate <x - mbar-l/she Pins Left: Male, Right: Female Thefemaleversionsfittothe. Theconnectorsusethesamepinsonair and vacuum side. The Connectors accept contacts as well as Co-axial ones. Please order the desired Pins separately and insert them into the Connector. The Standard mm Pins are included with the Connectors. General Specifications COMBINATION COAXIAL SUB-D Compliance DIN, MIL-C-0 Standard Pin-ø.0 mm ial Pin Floating shield Pin material Gold plated NiFe Seal Glass Ceramic Flange Stainless Steel L Test Voltage 00V DC Impedance not constant Temp. -00 C to 0 C Leakrate <x - mbar-l/she SIZE Sub-D Feedthroughs on Flanges, MIXEEDPOWER(P)+Standard(S)mmPins NO. OF PINS PART NUMBER WELD P+S -X-P 0 P+S -X-P-C0 P+S -X-P-C P+S -X-P-C- 0 P+S -X-P-K0 P+S -X-P-ISO P+S -X-P-ISO- SIZE HIGH POWER Connectors and Pins NO. OF PINS PART NUMBER AIR P + -FX-x-AIR AIR Male P + -MX-x-AIR HV* P + -FX-x-HV HV Male* P + -MX-x-HV UHV* P + -FX-x-PK Female off -POWER-F Male off -POWER-M Female off -COAX-F Male off -COAX-M *) Vacuum connectors include off crimp pins Sub-D Feedthroughs on / Flanges, MIXEDCOAXIAL(CX)+Standard(S)mmPins NO. OF PINS PART NUMBER WELD CX+S -X-C 0 CX+S -X-C-C0 0 CX+S -X-C-K0 CX+S -X-C-C- CX+S -X-C-C- Please note: Welding Sub-D Feedthroughs requires care and experience! Damage to the Feedthrough during welding is not covered by the warranty. We are happy to offer complete assemblies at competitive prices. 0,00,00,00,00,00 0,00,00,00,00,00,00,00,0,00,00,00,00 0,00 0,00,00, : Sec...ial : Sec...Crimp tools: Sec...
7 UHVPlugsandSocketsinPEEKandCeramic Allectra offers Female Connectors(Sockets) which fit to Feedthroughs as well as Male Connectors(Plugs) for invacuum coupling. Ceramic connectors: max. 00 C PEEK connectors: max. 0 C Please order Pins separately, see page. for range. HVversionsandairsideconnectorsarelistedonpage.. Type Vacuum Type Body material Sub-D Connectors for in-vacuum use High Vacuum and UHV Female- fits Feedthroughs& Male Plugs unfilled(pure) PEEK Locking screws included for Vac side(vented) (S type: no Vac side locking screws) Temp. range -0 C to 0 C Use Pins -PINF,-PINF-B.-PINF-S,-PINF-TC (Male types: -PINM-, -PINM-S,-PINM-TC) Vacuum Socket type Specification PEEK Sub-D Connectors Body material SUB-D: UHV SOCKETS. Specification Ceramic UHV Sub-D Connectors UHV Female- fits Feedthroughs& Male Plugs Ceramic/ Glass-Ceramic Locking screws included for Vac side(vented) (S type: no Vac side locking screws) Temp. range K to 00 C Use Pins -PINF,-PINF-B.-PINF-S,-PINF-TC Female Sockets include vented -0 UNC screws to fix to the.themaleversionsaresuppliedwithlongm. screws to connect to a Female Socket. The housings allow easy handling and provide shielding. They are made out of Aluminium and include a cable clamp for strainrelief.braidcanbeusedtogetafully shielded cable connection(see Sec. ). They fit to Male and Female Connectors. VACUUM UHV PEEK Sockets Female PEEK Sockets to fit Feedthroughs No. OF POLES PART NUMBER -FS0-PK -FS-PK -FS-PK -FS-PK-S* -FS-PK 0 -FS0-PK * for use with -D-0(no housing available) VACUUM UHV PEEK Plugs Male PEEK Plugs to fit Female Sockets No. OF POLES PART NUMBER -MS0-PK -MS-PK -MS-PK -MS-PK 0 -MS0-PK VACUUM UHV Ceramic Sockets Female Ceramic Sockets to fit Feedthroughs No. OF POLES PART NUMBER UHV -FS0-UHV UHV -FS-UHV UHV -FS-UHV UHV -FS-UHV-S* UHV -FS-UHV UHV 0 -FS0-UHV * for use with -D-0(no housing available) VACUUM UHV Ceramic Plugs Male Ceramic Plugs to fit Sockets No. OF POLES PART NUMBER UHV -MS0-UHV UHV -MS-UHV UHV -MS-UHV UHV -MS-UHV UHV 0 -MS0-UHV,00,00,00,00,00,00,00,00,00,00,00 0,00,00,00 0,00,00,00 0,00,00,00,00 Sub-D Housings with Strain Relief for PEEK and Ceramic Connectors, Male and Female VACUUM No. OF POLES PART NUMBER -HSG-D0-UHV -HSG-D-UHV -HSG-D-UHV -HSG-D-UHV 0 -HSG-D0-UHV...Air side and HV Sockets: Page...Pins: Page...Ready made cables: Sec...,00,00,00.00,00 -.-
8 Sub-D. SUB-D:HV&AIRSOCKETS High Vacuum Plugs and Sockets Air Side Sockets High Vacuum Connectors(glass filled polymer with a stainless steel outer) are suitable for High Vacuum ( - mbar)andtemperaturesupto C. Tobeusedwithourcrimppins,seeoppositepage. The Air side connectors with housings are limited to C Connectors for High Density and Mixed Sub-D are listed on page.. General Specification HV Sub-D Connectors Vacuum Socket type Body material S types SX types High Vacuum Female- fits Feedthroughs& Male Plugs(for internal connections) DAP reduced outer SS part no Vac. side locking screws Temp. range - C to C Use Pins -PINF,-PINF-B.-PINF-S,-PINF-TC (Male types) -PINM-, -PINM-S,-PINM-TC High vacuum Sockets for Sub-D Female type to fit Feedthroughs VACUUM NO. OF POLES PART NUMBER HV -FS0-HV HV -FS0-HV-SX HV -FS-HV HV -FS-HV-S HV -FS-HV HV -FS-HV-SX HV -FS-HV HV -FS-HV-SX HV 0 -FS0-HV HV 0 -FS0-HV-S,00,00,00,00 0,00,00,00,00,00,00 -FS-HV-S -FS0-HV-SX SX versions without metal housing(see photo on the left) High Vacuum Plugs for Sub-D Male Ceramic Plugs to fit female Sockets VACUUM NO. OF POLES PART NUMBER HV -MS0-HV HV -MS-HV,00,00 The Vacuum side HV housings include Strain Reliefandfixingsrewsforthe.Theyare specially designed to fit the Allectra Sub-D Feedthroughs. HV -MS-HV HV -MS-HV HV 0 -MS0-HV,00,00,00 High vacuum Housings for Sub-D for Male and Female Connectors VACUUM NO. OF POLES PART NUMBER HV -HSG-D0-SR HV -HSG-D-SR HV -HSG-D-SR,00,00,00 -HSG-D0-SR -HSG-D-SR HV -HSG-D-SR HV 0 -HSG-D0-SR Housings for small"s"- Types on request,00,00 -FS0-AIR with Solder pins Air side Sockets with housing for Sub-D Female type to fit Feedthroughs VACUUM NO. OF POLES PART NUMBER AIR -FS0-AIR AIR -FS-AIR AIR -FS-AIR AIR -FS-AIR AIR 0 -FS0-AIR Male versions available on request,00,00,00,00, HD and MIXED connectors: Page... Housings and Pins: Page...
9 Crimp Pins for Sub-miniature D Plugs& Sockets SUB-D: CRIMP PINS. As well as the Standard Crimp Pins, Allectra offers other versions for special purposes: Small versions for wires down to 0.0mm Budget versions without additional Stainless Steel outer Zero-magnetic pins and Ni-plated pins are available on request. Sub-D Small pins(left) and Standard Pins(right) Vacuum Material SS shell Wiresize Small Crimp tool General Specification CRIMP PINS High Vacuum and UHV Gold plated copper alloy Standard and Small type only 0..0mm(Standard+Budget) 0.0 to 0. mm(small) -CTOOL-SUB-D(wires >0.mm) -CTOOL(no SMALL pins) -CTOOL-HQ(all types) Crimp Pins for Sub-D FitsHVandUHVFemaleSockets No. PER PKT. PART NUMBER STANDARD -PINF- STANDARD -PINF- STANDARD -PINF- BUDGET -PINF--B BUDGET -PINF--B SMALL -PINF--S,00,00,00,00,00,00 SMALL -PINF--S,00 Crimp Pins for Sub-D FitsHVandUHVMalePlugs Female Budget pins To connect a Crimp Pin directly to a Feedthrough without using a connector, the special "-NH" pins are recommended. These avoidtheriskofthepintip touching ground. No. PER PKT. PART NUMBER STANDARD -PINM- STANDARD -PINM- SMALL -PINM--S SMALL -PINM--S Crimp Pins for Sub-D Special pins for use without Sockets No. PER PKT. PART NUMBER STANDARD -PINF--NH STANDARD -PINF--NH,00,00,00,00,00,00 -CRIMPINS different crimp tools: -CTOOL-SUB-D -CTOOL -CTOOL-HQ...Other Crimp Pins: Sec....Screw Connectors: Sec.... Crimp Tool for Sub-D ForallHVandUHVtypes No. PER PKT. PART NUMBER BUDGET -CTOOL-SUB-D HIGH QUALITY -CTOOL-HQ Crimp Tool for Sub-D Not suitable for S types No. PER PKT. PART NUMBER STANDARD -CTOOL Pin demounting Tool for Sub-D ONLYFORHVS No. PER PKT. PART NUMBER DEMOUNT -CRIMPINS,00,00,00,00 -.-
10 Sub-D.SUB-D: SPECIAL CONNECTORS Connectors for Sub-D Here the following special purpose Connectors are listed: AirsideAdaptersfemaletofemale Air and Vacuum connectors for High Density Sub-D Air and Vacuum connectors for MIXED Sub-D The connectors for the standard Sub-D Feedthroughs are listedonpage.and. Theseadaptorsareforuseontheairsideof Standard Sub-D Feedthroughs. With these adaptors the Air Side of the Feedthrough becomes Female allowing the use of conventional Male to Female cables on the Air Side. VACUUM Polarity adaptors for Sub-D Air side Female to Female AIR -D0-ADR AIR -D-ADR AIR -D-ADR,00,00,00 AIR * -D-ADR AIR 0* -D0-ADR *) Short cable adaptor Sub-D High Density Connectors and Pins NO. OF PINS PART NUMBER Air Socket* -FS-AIR Socket* -FS-PK,00,00 High Density Vacuum Connectors include Female Crimp Pins. Air Side Connectors are solder type. *includessoldertagsorpins Pin female -PINFHD- Pin female -PINFHD- Pin male -PINMHD- Pin male -PINMHD-.00, Connectors for COMBINATION Sub-D, FemaleandMale,POWERPINS(P)&COAXPINS(CX) NO. OF PINS PART NUMBER Air Socket P/CX + -FX-x-AIR Air Plug P/CX + -MX-x-AIR HV Socket* P/CX + -FX-x-HV,00,00,00 The Combination Sub-D Feedthroughs(page )havestandardpinsandadditional ones which are either (P) or Co-axial (CX). The Combination Connectors shown opposite fit both types. Combination Sockets for Vacuum use include Standard Pins(-PINF). additional Pins(either POWER or COAX type) should be ordered as required.! HV Plug P/CX + -MX-x-HV UHV Socket* P/CX + -FX-x-PK * includes standard Female Pins(-PINF type) Female P Pin off -POWER-F Male P Pin off -POWER-M Female CX Pin off -COAX-F Male CX Pin off -COAX-M Male connectors can be used for in-vacuum connections Pin Removal Tool for/pins,00,00,0,00,00,00 Pin Removal tool PART NUMBER -EXT-POWER, Combination Sub-D Feedthroughs: Page... Pins: Page...
11 SUB-D: THERMOCOUPLE. Sub-miniature D Feedthroughs for use with K type s Sub-DsmaybeusedforT/Cs.AStandardD-Type FeedthroughisusedbuttheAirandVacuumsidePinsare changedtot/ctypes.althoughtheuseofstandardpin materialincontactwiththet/cpinsresultsinthecreationof two T/C junctions, the measurement error introduced is negligible provided the vacuum side of the Feedthrough contactsandtheairsideareatthesametemperature. Testsshowedamaximumerroroflessthan0.K Sub-D General Specification K type T/C Crimp Pins Vacuum/ Air Material Fitswire Crimp tool Pack contents High Vacuum and UHV K Type Chromel and Alumel pairs TypeNandTavailableonrequest 0. 0.mm -CTOOL-TC or -CTOOL-TC-HQ Pairs( pieces Chromel and pieces Alumel) K Type Crimp Pins for Sub-D Fits HV and UHV Female Sockets for Feedthroughs No. PER PKT. PART NUMBER K, Female x -PINF-K,00 If a high accuracy temperature measurement is required, the use of a Platinum Resistance Thermometer is recommended. See Sec. K Type Crimp Pins for Sub-D FitsHVandUHVMalePlugs No. PER PKT. PART NUMBER K, Male x -PINM-K,00,00,00 OtherCrimpPins-SeeSec.andSec. Pin Crimp Tool for Sub-D ForallHVandUHVtypes No. PER PKT. PART NUMBER Standard -CTOOL-TC High Quality -CTOOL-TC-HQ -CTOOL-TC-HQ -CTOOL-TC Air side Sockets for Sub-D Fit to K Type Pins Air side housings for Pins. A housing is included in the pack. SIZE PART NUMBER AIR -FS0-ATC AIR -FS-ATC AIR -FS-ATC AIR -FS-ATC AIR 0 -FS0-ATC... wires: Sec.... Standard "Classical" TC Feedthroughs: Sec...,00,00,00,00,00 -.-
12 Sub-D. SUB-D: READY MADE CABLES Sub-D ready made In-Vacuum Allectra offers a full range of vacuum cables including both standard types and cables made to customers' specitications. The standard cable lengths is 0. m. Any desired length available. Please note that only cables with one connector are listed here.theotherendisleftopen. All other types are available on request. Specifications Standard In-Vacuum Vacuum Socket type Construction Current Voltage Temp. HV or UHV PEEK, Ceramic or HV Kapton Ribbon Cable/ PTFE A max 00V DC Defined by connectors Please supply us with your requirements for custom cables: Type of connectors, cable, with or without housing, shielding, length... Anexampleofacustomcableisshown below. Custom made HV-Cable with one"small" connector, housings and complete shielding. Pleaseaskforaquoteforyourspecial application. VACUUM In-Vacuum KAPTON Ribbon Cable for Sub-D HVSockettoopenend,00mmlong HV 0-D0FXHR-00 HV 0-DFXHR-00 HV 0-DFXHR-00 HV 0-DFXHR-00 HV 0 0-D0FXHR-00 VACUUM In-Vacuum KAPTON Ribbon Cable for Sub-D PEEKSockettoopenend,00mmlong 0-D0FXPR-00 0-DFXPR-00 0-DFXPR-00 0-DFXPR D0FXPR-00 VACUUM In-vacuum PTFE Ribbon Cable for Sub-D HVSockettoopenend, 00mmlong VACUUM No OF WIRES PART NUMBER HV(PTFE) 0-D0FXHPT-00 HV(PTFE) 0-DFXHPT-00 HV(PTFE) 0-DFXHPT-00 HV(PTFE) 0-DFXHPT-00 HV(PTFE) 0 0-D0FXHPT-00 In-Vacuum KAPTON Ribbon Cable for Sub-D UHVCeramicSockettoopenend,00mmlong UHV 0-D0FXUR-00 UHV 0-DFXUR-00 UHV 0-DFXUR-00 UHV 0-DFXUR-00 UHV 0 0-D0FXUR-00 Sub-D KAPTON Ribbon Cable- Extension lengths for all Kapton Ribbon cables No. OF WIRES LENGTH PART NUMBER +00 mm 0-EXT mm 0-EXT- +00 mm 0-EXT- +00 mm 0-EXT mm 0-EXT-0,00 0,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,0,00,0,0, Other Ready made : Sec. (CM) / Sec. (SMA)-(SMB)-(BNC)-(MHV)-(SHV)-...
13 CM/DUAL IN-LINE Circular Miniature(CM) and Dual In-line(DIL) Feedthroughs Sub-D. CM FEEDTHROUGHS -> Page. and Pin Circular Miniature Feedthroughs Pin High Current Versions Flanged versions and weldables.cmsets Circular Miniature Feedthrough Sets andpintypes Pinhighcurrenttypes include Air and Vacuum Sockets ->Page.. CM: CONNECTORS -> Page. Industry standard air side sockets PEEK vacuum side sockets. CM: IN-VACUUM CABLES -> Page. Vacuum ready cables for the Circular Miniature Feedthroughs with housing and strain relief, optional with shielding. DUAL IN-LINE(DIL) -> Page. Dual In-line Feedthroughs for direct connection to PCBs TOOLS FOR CABLE STRIPPING AND CRIMPING -> Sec. -.-
14 Sub-D. Compliance Pin Diameter TestVoltage Current CM FEEDTHROUGHS & Pin Circular Miniature Feedthroughs Pin High Current versions Based on the shell size of DIN connectors, Allectra offers compact feedthroughs with and Pins. Additionally a way High Current version is available. The Industry Standard Air Side connectors are shielded and EMC compliant. All Air Side Connectors are screw-on type. IfusedwiththeVacuumSideHousing,afullyshielded connection from air to vacuum is possible. Specifications IEC00-.mm( pin)/.0mm(+ pin) 00VDC(pintopin/pintoGND) A ( pin)/ A(andpin) Temp. -00 C to 0 C Leakrate <x - mbarl/she FLANGE 0-CM-C0- air side view Circular Miniature Feedthroughs Pin High Current Versions WELD 0-CM 0-CM-C 0 0-CM-C0 0 (x) 0-CM-C0- (x) 0-CM-C- (x) 0-CM-C- 0,00 0,00,00 0,00,00 0,00 Circular Miniature Feedthroughs Pin Versions Weldable versions: 0-CM and 0-CM Required welding diameter is.mm FLANGE WELD 0-CM 0-CM-C 0 0-CM-C0 0 (x) 0-CM-C0- (x) 0-CM-C- (x) 0-CM-C- 0,00,00,00,00 0,00,00 Circular Miniature Feedthroughs Pin Versions 0-CM-C air side view The CM Feedthroughs are designed for flanges. On larger flanges they can be used in combination with other types like ial Feedthroughs or Sub-Ds. FLANGE WELD 0-CM 0-CM-C 0 0-CM-C0 0 (x) 0-CM-C0- (x) 0-CM-C- (x) 0-CM-C- Versions on flanges are available on request, smallest flange size is,00 0,00 0,00,00 0,00,00, CM Sockets: Page.... CM : Page...
15 Circular Miniature(CM) Feedthrough Sets include Air and Vacuum Side Sockets The sets contain: Air side connector Vacuum feedthrough Vacuum side connector including pins CM SETS. Vacuum side housing with strain relief (Ifnohousingshouldbeused,thepartscanbeordered separately) General Specifications Vacuum UHV Temp. Vacuum Socket -00 C to 0 C Temp. Air Socket C Current Pin type A Current&Pins A Test Voltage 00V DC RatedVoltage 0VAC/0V(PinType) Thread size connector M FLANGE Pin High Current Circular Miniature Sets on Flanges with Air and Vacuum Connectors 0-SET-C-SR 0 0-SET-C0-SR 0 (x) 0-SET-C0--SR (x) 0-SET-C--SR Note: Sets available on request. Smallest size is,00,00,00,00 Sub-D FLANGE Pin Circular Miniature Feedthrough Sets on flanges with Air and Vacuum Connectors 0-SET-C-SR 0 0-SET-C0-SR 0 (x) 0-SET-C0--SR (x) 0-SET-C--SR Note: Sets available on request. Smallest size is,00,00,00,00 0-CM-C with air side connector FLANGE Pin Circular Miniature Feedthrough Sets on flanges with Air and Vacuum Connectors 0-SET-C-SR 0 0-SET-C0-SR 0 (x) 0-SET-C0--SR (x) 0-SET-C--SR Note: Sets available on request. Smallest size is,00 0,00,00 0,00 Custom flange with x way CM Feedthroughs onaflange No. OF PINS 0-SR / 0-SR PART NUMBER,00,00 The Sets listed here contain the vacuums side housings with strain relief. On request also sets without the housings are available for the - pin versions. 0-SR Housing with Strain Relief clamp...cm Feedthroughs: Page....CM Sockets: Page... Circular Miniature Feedthrough Housings -Spareparts- -.-
16 Sub-D. CM: CONNECTORS CM Series Air and Vacuum Sockets PEEK Vacuum Side Sockets PEEKUHVVacuumSideSockets,,orway SS Housings with strain relief AirSideSockets,orway Straight or 0 Air Side Connector Allectra recommends the use of the housing for handling Specifications Vacuum: UHV Materials PEEK, Stainless steel Current Pin type A Current / Pin type A Temp.Vacuum Sockets -00 C to 0 C Temp. Air Sockets - C to C Vacuum Sockets including Standard Pins STANDARD type(without housing) No. OF PINS PART NUMBER STANDARD 0-CON STANDARD 0-CON STANDARD 0-CON,00,00,00 Back shell with pins during assembly Vacuum Sockets including Standard Pins Type with Housing and Strain Relief Vacuum: Materials Specifications Pins UHV Phospor Bronze/ BeCu Gold plated Wire Diameter Standard mm ø Small mm ø Connection crimp or solder No. OF PINS PART NUMBER HOUSING 0-CON-SR HOUSING 0-CON-SR HOUSING 0-CON-SR Replacement Pins Standard and Small Types QTY PART NUMBER Standard 0-CM-PINF- Standard 0 0-CM-PINF-0 Small 0-CM-PINF--S Small 0 0-CM-PINF-0-S The -pin Versions use the pins 0-CRBC-.,00,00,00,00,00,00,00 Seepage! Air Side Sockets Straight and 0 types No. OF PINS PART NUMBER STRAIGHT 0-CON-AIR 0 0-CON-AIR0 STRAIGHT 0-CON-AIR 0 0-CON-AIR0 STRAIGHT 0-CON-AIR,00,00,00,00, CON-AIR0, CM Feedthroughs: Page.... CM Ready made cables: Page...
17 CM: IN-VACUUM CABLES. Vacuum Ready for Circular Miniature (CM) Series Kapton wire bundles,, and way UHVCablelengthsof0.mand0.masstandard Right Angle and Straight Air Side cables Sub-D The standard Kapton Wire is -KAPM-0(see page ) for - and -Pin, alternatively KAPM-00 and KAPM-0 types are available to order. -Pin version uses -KAPM-0 Specifications Vacuum Side UHV Temp. -00 C to 0 C Materials Kapton coated Copper (-KAPM-0 for -/-Pin) Peek, Stainless Steel Air Side Temp. -0 C to 0 C Materials PVC isolated Copper Vacuum Ready Cable for CM Series with STRAIN RELIEF Socket No. OF PINS LENGTH PART NUMBER 0 0-CM-0-SR 00 0-CM-00-SR 0 0-CM-0-SR 00 0-CM-00-SR 0 0-CM-0-SR 00 0-CM-00-SR,00,00 0,00,00 0,00,00 Air Side Air Side per Metrer Shielded cables(without connectors) NR. PINS LENGTH PART NUMBER (x) m -CAB-AIR m -CAB-AIR-HC* (x) m -CAB-AIR 0(x) m -CAB0-AIR *) High Current cable with x 0.mm², shielded Other cabels: Shielded Twisted Pair 0.mm² Top: Cable without fitted Housing Top of page: Cable with Housing and Strain Relief Socket Left: Cable with Housing and Strain Relief Socket + Braid,00,00,00,00 Vacuum Ready Cable for CM Series with STRAIN RELIEF and BRAIDED CABLE No. OF PINS LENGTH PART NUMBER 0 0-CM-0-SRB 00 0-CM-00-SRB 0 0-CM-0-SRB 00 0-CM-00-SRB 0 0-CM-0-SRB 00 0-CM-00-SRB AirSideCableforCMSeries With mounted STRAIGHT plug No. OF PINS LENGTH PART NUMBER m 0-CAB-AIR (HC) m 0-CAB-AIR-HC m 0-CAB-AIR m 0-CAB-AIR HC=Highcurrent Vacuum Ready Cable for CM Series Socket without housing No. OF PINS LENGTH PART NUMBER 0 0-CM CM-00 AirSideCableforCMSeries With mointed RIGHT ANGLE plug No. OF PINS LENGTH PART NUMBER m 0-CAB-AIR0 m 0-CAB-AIR0 m 0-CAB-AIR0,00,00,00,00,00,00,00,00,00,00,00,00 0,00,00 Youcangetcablesinalldesiredlengths!Abovearecables inmlength.foreachadditionalmaddthecablecosts fromthelistontheleft... CM Feedthroughs: Page.... CM Feedthrough Kits: Page
18 Sub-D. Dual In-line Feedthroughs DUAL IN-LINE(DIL) for direct connection to Printed Circuit Boards This special allows direct connection to PCB on either Air or Vacuum side. Typically the electronic board is connected totheairsidetogivetheshortestsignalpath. UptoFeedthroughswillfitontoaflange. Specifications Vacuum UHV Materials Stainless Steel/ Glass Ceramic Temp. -0 C to 0 C Current per pin A Pin spacing mm pitch FLANGE Dual In-line Feedthroughs mmxmmpitch WELD 0 0-DIL0M 0 0-DIL0M-C 0 0-DIL0M-C-,00 0,00 0,00 0-DILM-C DIL0M-C DIL0M-C0-.0,00,00.00, DILM-C DIL0M-C0-.,00.0,00 Dual In-line Feedthroughs Connectors for Air and Vacuum 0-DIL0M-C Crimp pin 0-CRF-0 VACUUM PART NUMBER AIR IDC 0-CON0M-IDC-AIR AIR SOLDER 0-CON0M-W-AIR VACUUM PEEK 0-CON0M-PK VACUUM Dual In-line Feedthroughs Pins for vacuum side No. PER PKT PART NUMBER VACUUM 0-CRF-0-,00,00,00,00 VACUUM 0 0-CRF-0-0 0,00 Vacuum side connector Dual In-line Feedthroughs Airsideribboncablem VACUUM LENGTH PART NUMBER Vacuum side connector with optional housing AIR m -RIB0--AIR Housings for Dual In-line Feedthroughs for Vacuum are available on request., UHV Solder: Sec.... PTFE Ribbon Cable: Sec....
High Density Connectors Multipin and MS Multipin MS High Current and High Voltage
Multipin is the description for electrical feedthroughs which have two or more conductor paths, and include connectors for one or both sides. This series is typically used for transmission of low power
More informationSection 7: Contents. Section Item Pages. Connectors Thermocouple Power, Push-on and In-line MS Circular Power, High Voltage Coaxial
Section 7: Contents Section Item Pages 7.1 7.2 7.3 Connectors Thermocouple Power, Push-on and In-line MS Circular Power, High Voltage Coaxial Vacuum Connectors & Cable Assemblies Sub Type C & D BNC SMA
More informationUHV Feedthrough, Conflat compatible flange. UHV female cable assembly, , PEEK connector and Kapton insulated coaxial
Coax-D Subminiature-D Coax-D Subminiature-D Accu-Glass 1, 3 and 5 Pin Feedthroughs UHV Feedthrough, 100520 Conflat compatible flange UHV female cable assembly, 100640, PEEK connector and Kapton insulated
More information8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
More informationSub-D Feedthroughs, Connectors, Pins & Cables
SUB MINIATURE D S Feedthroughs, Connectors, Pins & SUB-D: System Overview -> Page. Sub-miniature Feedthroughs, Connectors, Different Types (Standard / High Density/ /) SUB-D: Standard Versions -> Page.
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationStandard Series Standard
Standard Series Standard Technical Data Coupler connector, cable connector and coupler connector rectangular housing Locking screw connection Protection IP 50 to IP 54 with conexil in the housing, flat-gasket
More informationTechnical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
More informationCONNECTORS & RECEPTACLES
STRAIGHT CORD PLUG with Extended Barrel TYPE 12BL6M TYPICAL Male plug with ground key-rib. Nickel-plated diecast handle. Contact friction coupling. Flexible black strain relief. Heavy duty cable clamp.
More informationHan-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu
Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18
More informationN Series Connectors Medium sized connector for high-voltage applications Suited for critical applications and environments Performance to 11 GHz (commercial) and 18 GHz (hi frequency) Intermateable with
More informationEPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
More informationDirectory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationIP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
More information09. DIN CONNECTORS
. 41 612 CONNECTORS Connectors that comply with 41 612 have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary.
More informationD-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
More informationMiniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More informationFISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
More informationOperating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
More informationHan PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
More informationHan R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.
Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet 0039-4 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact
More informationVARIOSUB D-SUB 25 Contact Inserts, Sleeve Housings
Contact Inserts, Sleeve Housings Introduction VARIOSUB is a range of plug connectors specially designed for signal and data technology in an industrial environment with high degrees of protection, temperatures
More informationfischer connectors 4032 Series HIGH-PERFORMANCE IN A VERSATILE PACKAGE MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION INSTRUMENTATION Edition 1.
fischer connectors 4032 Series Plastic connectors Edition 1.2 MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION HIGH-PERFORMANCE IN A VERSATILE PACKAGE INSTRUMENTATION PERFECT PACKAGE www.fischerconnectors.com
More information09. DIN Connectors
. Connectors Connectors that comply with have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary. The classic signal
More informationIEEE-488. included No. Yes, 1 per IEEE-488. included. channel. Yes, 1 per IEEE-488. included. channel IEEE-488. included. channel IEEE-488.
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Section 5 8/6/04 4:36 PM Page 5-8 Table 5-2: High Speed Power Supplies Model 2302 2303 2303-PJ 2304A 2306 2306-PJ 2306-VS
More information400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof
More informationODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic
ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently
More informationExtensive range of QPL standard and custom audio connectors trusted by our fighting forces for 35 years. MIL-DTL audio connectors
Extensive range of QPL standard and custom audio connectors trusted by our fighting forces for 35 years MIL-DTL-55116 audio connectors MIL-DTL-55116 solutions Eaton s MIL--DTL--55116 connectors and cable
More informationApplications
Han PCB adapter Contents Page Technical characteristics PCB adapter for Han DD... 20.02 Han DD Inserts with PCB adapter... 20.03 Technical characteristics PCB adapter for Han E... 20.04 Han E Inserts with
More informationAXOMACH E-16. High data rate links for faster data transmission. Microwave coaxial cables. Panel mount connector QUASI-FLEX. Cable mount connector 2
AXOMACH High data rate links for faster data transmission AXON proposes AXOMACH, a range of high data rate links composed of low loss microwave coaxial cables and different connector types: AXOMACH Micro-D
More informationSummary of shell housings and accessories Shell housing A Shell housing D EMC housing
Directory chapter 20 Page Summary of shell and accessories........................... 20.02 housing C.......................... 20.04 housing A................................................. 20.08 housing
More informationAmphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
More informationIDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
More informationKey features: M5 Series. Buccaneer. Full Contact Diagrams Page 120
The most compact connector type in the MSeries range, Bulgin s waterproof M5 sensor connectors come in straight and angled forms with or overmolded cable option s and a variety of panel mount receptacles.
More informationAmphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
More informationUSB Buccaneer BUCCANEER
Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling USB adaptor Sealing Cap Clip Standard USB O ring maintains IP68 seal at interface Panel gasket
More informationExtract from new. Device Connectivity catalogue. HARTING har-flex. People Power Partnership
Extract from new Device Connectivity catalogue HARTING har-flex People Power Partnership . har-flex CONNECTORS The continuous scalability by an even number of contacts, i.e. from 6 to 100, of the HARTING
More informationFiltered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
More informationHARTING. Interface Connectors. People Power Partnership
11 5 HARTING Interface Connectors People Power Partnership Directory chapter 00 Modular metric high speed connectors, 2.0 mm pitch Page connector system general information......................... 00.04
More informationCABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
More informationSN Series - Part Numbering
SN Series - Part Numbering Features Push-pull technology Miniature circular Light weight Low cost Applications Professional audio and video CCTV system Portable wireless radio Factory Automation Computers
More informationRX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
More informationTE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE. AMPLIMITE HDF for Flat Ribbon Cable. TE Internal Number:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS IDC D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE AMPLIMITE
More informationINCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7
More informationMating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationCannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationPC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
More informationEXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
More informationModular Connectors 75
75 Plug/Jack Compliant to Enhanced Category 5 standards Connector type Size Series Name Page plug connectors compliant to enhanced category 5 standards 8 TM21P 77 jack connectors for high-speed LAN transmission
More informationRight angle press-fit D-Sub connectors
Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN
More informationItem No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More informationDatamate High-Reliability Connectors
Datamate High-Reliability Connectors Industry recognised, British Standard approved Datamate is the field-proven high-reliability range of choice for many industries. Approved to British Standard 9525-F0033
More informationFront Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
More informationModular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves
Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves 2 rue René Laennec 51500 Taissy France Fax: 03 26 85 19 08, Tel : 03 26 82 49 29 E-mail:hvssystem@hvssystem.com
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
More informationM12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET
M12 Connectors Application Advantage Shielded design ETHERLINE Ethernet Cable, Connectors & Tools M12 Field Wireable Connectors Male Female Temperature Range: Max. 85 C Nominal Voltage: Nominal Current:
More informationMale header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>
96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5
More informationINTERCONNECT SOLUTIONS
INTERCONNECT SOLUTIONS Products Overview Connect with Us... Experience Makes the Difference Who We Are We have been designing and manufacturing interconnect products for over 40 years. Today we supply
More informationFront Load Dual Sensor
INFICON Front Load Dual crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The dual sensor provides a backup crystal and is essential
More informationRinglock is a range of robust circular
Connectors is a range of robust circular connectors for industrial applications. It uses a metal bayonet coupling system for quick and reliable connections and thermoplastic bodies for low installed cost.
More information7011-C, 7012-C, 7013-C, 7015-C, 7018-C, 7021, MTC-2 Mass Terminated Assembly Twisted pair (45) 96-pin female 96-pin female 2 6.
TERMINATIONS LENGTH MODEL DESCRIPTION TYPE FROM TO m ft USE WITH: 236-ILC-3 Safety Interlock Shielded twisted pair 3-pin round 3-pin round 3 10 236, 237, 238, 8007, 8008 237-ALG-2 Low Noise Input Triax
More informationSUNCLIX Connection technology for photovoltaics
SUNCLIX Connection technology for photovoltaics Connection technology for photovoltaics Are you looking for innovative and reliable connection technology for your PV modules, inverters or the complete
More informationIndustrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications
Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications Type 0981 ENC 100 RJ45/M12 adaptor, female receptacle connector M12, D coding, chassis side thread PG 9, RJ45 female connector,
More informationFront Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
More informationKH SERIES. Features. JK series area by 20% compared with our JK series subminiature connectors. 6.18
D SUBMINIATURE CONNECTOR Right angle through-hole socket K SERIES RIGT ANGE TROUG-OE SOCKET 01 (with hexagonal lock screw blocks) (without lock screw blocks, but with grounding adapters having a inch thread)
More informationCatalog Snapshot.
Catalog Snapshot EMC Shielding Board Level Shielding EMC SHIELDING EMC shielding products improve PCB layouts by eliminating the need for soldering cans to the board. This wide range of products is suitable
More informationVMEbus systems System description Technical characteristics System description
Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................
More informationCONTA-ELECTRONICS. Interface modules
CONTA-ELECTRONICS allow for a passive mechanical-electrical implementation of standard connectors onto screw or tension-spring PCB terminals. The individual signals of the multi-pole or high-pole connectors
More informationStandard Buccaneer - USB
IP68 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling
More information(Smallest Circuit) Current Rating. (Largest Circuit) Housing Lock. Current Rating. 12A 11A Positive or None
General Overview The Jr. was specifically developed for positive locking, wire-to-wire and wire-to-board applications. It is available in single row and dual row versions. The system offers the widest
More informationElectrical Test voltage (Vrms) Service sea level at m M I II
Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522
More informationACCESSORIES. Contents. Cable Terminators
ACCESSORIES Contents Cable Terminators Cable Feed Throughs Taper Sleeves Coloured Plastic Caps Fastening Screws Insulating Washers Solder Tags Component Container SUCOBOX Accessories for SK Connectors
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationCatalog Snapshot.
Catalog Snapshot EMC Shielding Board Level Shielding EMC SHIELDING EMC shielding products improve PCB layouts by eliminating the need for soldering cans to the board. This wide range of products is suitable
More informationDynamic Series Connectors
D-5000 Series Series profile The Dynamic 5000 series was developed for up to 5 amperes in response to the demand for improved reliability and productivity for the main power lines in equipment. They can
More information6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
More informationSYSTEM CONNECTORS FOR W-CDMA
SYSTEM CONNECTORS COMPLINT WITH EIJ RC-5238 (CONNECTOR FOR IMT-2000 MOBILE PHONES) SYSTEM CONNECTORS FOR W-CDM Receptacle Signal 10 contacts with coaxial, with charging terminals ( type) Plug Signal 10
More informationV.35 - Interface connectors
V.35 DTE/DCE Interface connectors Description The Telecommunications Standardization Sector TSS V.35, formerly CCITT V.35 is the international standard termed Data Transmission at 48 Kbps using 60-108
More informationDura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
More informationORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201
HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36
More informationLevel sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Plug
Series 0 Mighty Mouse ouble-start ACME Thread Plug 0-00 and 0-00 Ordering Information Series 0 Series 0 Mighty Mouse Connector features a double-start modified stub ACME mating thread for improved protection
More informationSmall Circular Connector. JN1/JN2 Series. Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series CONNECTOR MB-0054-10 June 2012 Angle Plug [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
Series 0 Mighty Mouse ouble-start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Rear Panel Jam Nut Mount Shell Style 0 Square Flange Mount Shell Style 0// In-Line Shell Style 0 How
More informationSputtering Sensor ADVANTAGES
The INFICON is specifically designed for use in any sputtering process. The sensor body and cooling tubes are gold plated beryllium copper for maximum cooling efficiency in the sputtering environment.
More informationACCESSORIES CONTENTS CABLE TERMINATORS PAGE
ACCESSORIES CONTENTS PAGE Cable Terminators... 403 Taper Sleeves... 406 Coloured Plastic Caps... 407 Fastening Screws... 407 Insulating Washers... 408 Solder Tags... 409 Component Container SUCOBOX...
More informationAdaptors. Circular Adaptors Polamco design and manufacture the following circular adaptors:
Adaptors Circular Adaptors Polamco design and manufacture the following circular adaptors: Non Screened 37 Series Cable Seal Adaptors 76 Series Low Profile Fixed Adaptors 77 Series Adaptors with Cable
More informationMUSB Series - Right Angle Termination, Single and Stacked 12-2 MIEEE-P1394 Series - Fire Wire Connector 12-5
Universal Serial Bus MUSB Series - Right Angle Termination, Single and Stacked 12-2 MIEEE-P1394 Series - Fire Wire Connector 12-5 MAXCONN, INC. - 2151 DEL FRANCO STREETo SAN JOSE, CALIFORNIA 95131-408-435-5050,,
More informationFOR PC BOARD TO FLAT CABLE
AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right
More informationRight angle through-hole plug and socket. Features circuits 25-circuits 9-circuits 25-circuits
D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole plug and socket RIGT ANGE TROUG-OE PUG AND SOCKET 01 Right angle through-hole plug (with hexagonal lock ) Right angle through-hole socket (without
More informationSEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
More information9146-R Smart Connector Connectors for the TE 9146-R
Instruments 9146-R Smart Connector Connectors for the TE 9146-R Enables plug-and-play type operation of the 9146-R with a variety of input types. All transducer s information is contained within the plug
More informationConnectors. product catalog no. 26
Connectors product catalog no. 26 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Product Groups Overview Explanation of Symbols Termination Application
More informationonlinecomponents.com
IP68 Over moulded assembly provides IP68 cable seal IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling
More informationEasy and Secure for Rack Systems
Easy and Secure for Rack Systems Front I/O solution designed for Railway applications 3 layouts available 29 pos / 41 pos / 5 Quadrax Compact & high density Design compatible with 3U racks Improved shielding
More information