IBM United States Announcement , dated May 22, 2007

Transcription

1 IBM United States Announcement , dated May 22, 2007 IBM Deskside HMC performs resource management for configuring, operating, and servicing IBM System p5 and System i5 servers; PCI-X Cryptographic Coprocessor provides support for Description...2 Discretionary information...5 Publications... 5 Services...5 Technical information...6 IBM Electronic Services...8 Terms and conditions... 9 Prices...12 Order now...14 At a glance The IBM Deskside Hardware Management Console (HMC) (7310-C06) is a dedicated workstation for system and partition control of IBM POWER5 or POWER5+ processor-based servers. The HMC is designed to deliver: Logical partitioning (LPAR) control Resource control for Capacity on Demand (CoD) offerings: Capacity Upgrade on Demand, On/Off CoD, Trial CoD, Reserve CoD, and Utility CoD Boot, start, and stop actions for the system or individual partitions HMC install, backup, and restore via network interface Serviceability tools for determining problems and providing service support through the Internet (SSL supported for call-home via HTTPS) or via modem For ordering, contact: Your IBM representative, an IBM Business Partner, or the Americas Call Centers at 800-IBM-CALL Reference: YE001 Overview The IBM 7310-C06 joins other HMC models to provide System p5 and System i5 server support. Along with the other HMC models, it provides a dedicated workstation that allows you to configure and manage partitions and Capacity on Demand on POWER5 and POWER5+ processor-based servers. One HMC is designed to manage multiple servers and dual HMCs are designed to provide redundant support by managing the same system. To help ensure consistent function for all 7310 HMC models, each HMC is shipped preloaded with the Hardware Management Console for POWER5 Licensed Machine Code (#0961). The System p5 575, 590, or 595, or System i5 595 servers must be managed by an HMC. For hardware control using Cluster Systems Management (CSM), an HMC is required. All temporary CoD offerings on System p5 servers, including Trial CoD, On/Off CoD, and Reserve CoD, require an HMC. An HMC is recommended for use with all CoD offerings. When using Advanced POWER Virtualization (APV), either an HMC or Integrated Virtualization Manager (IVM) is required. The HMC offers serviceability tools for the systems it controls. The HMC is connected to a dedicated port on the service processor of the system via an Ethernet connection. The Ethernet connections from HMC to System p5 575, 590, or 595 or System i5 595 servers must be via private LAN with the HMC configured as a DHCP server, whereas other IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 1

2 System p5 or System i5 servers can be either on a private or public LAN and do not require the HMC to be configured as a DHCP server. LAN tools such as call-home and error log notification are available through a modem or the Internet (SSL supported for call-home via HTTPS) for determining problems and providing service support. Multiple POWER5 or POWER5+ processor-based servers can be managed by one HMC, either physically attached to the server or logically attached over a LAN. Key prerequisites A System p5 or System i5 server that supports an HMC Planned availability date June 8, 2007 Description The 7310-C06 has the following standard hardware attributes: Dual core Intel, Xeon 3050, 2 MB cache, 2.13 GHz processor, 1066 MHz front-side bus. 1 GB of system memory. 80 GB minimum HDD. DVD-RAM for creation and storage of configuration backup information. DVD-RAM media: 4.7 GB single-sided DVD-RAM, type 2 media. Modem The number of available PCI slots in the configuration and the availability of a homologated internal modem for the ship-to country determine whether an internal modem is shipped. If an internal modem is not shipped, an external modem is shipped if there is an homologated modem available for the ship-to country. Two integrated serial ports. One graphics port. One integrated 10/100/1000 Mbps Ethernet port. Six USB ports: two front and four rear. Three 32-bit PCI slots. Two PCI-express slots (not used). Integrated diskette drive. All HMCs are designed to provide: Creation and storage of system and partition profiles Ability to display system and partition resources and status HMC backup and restore via network interface Concurrent firmware maintenance I/O concurrent maintenance Power subsystem concurrent maintenance Support to configure Switch Network Interface adapters Support for Redundant FSP with dynamic failover function Support to configure Virtual I/O Server Shared Ethernet failover Support for I/O server enhancements for VIOS and RPA partitions Remote sharing support for i5/os system console sessions through the 5250 Console Proxy IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 2

3 System p5 server environments controlled by IBM CSM V1.6, or later Renewable Agreement for Machine Control Program Remote Support Additional HMC install and upgrade options: IBM orderable DVDs and CDs Downloadable.iso images for creating your own DVD and CD media Downloadable.zip files Install and upgrade over network Web sites provide access to support, installation instructions, and education, as well as the latest information on new function available on your HMC. For HMC support, including installation instructions, HMC recovery images, and DVD and CD ordering, visit webapp/set2/sas/f/hmc/home.html For the POWER5 code matrix (recommended levels for new function and hardware), visit app/set2/sas/f/power5cm/home.html The 7310-C06 requires HMC for POWER5 Licensed Machine Code V6.1.2 with APAR MB01938 (PTF MH00919). Resource Link Web site (education materials) The Hardware Management Console Licensed Machine Code Version 7 (#0962) may be ordered via MES for 7310 HMCs for environments that may include POWER5, POWER5+, and POWER6 processor-based servers. Licensed Machine Code Version 7 (#0962) delivers an enhanced and easy-to-use HTML-based user interface with remote access via a supported Web browser, integration of the IBM System Planning and Deployment Tool for simplified planning and deployment of a virtualized System p environment, and the ability to control services based on POWER5, POWER5+ and POWER6 processor technology. The documents that IBM makes available to support installation and operation of Version 7 HMC are available in the supported languages. Version 7 HMC menus and display information will be available only in English at the time of announce. Until the translated HMC machine code is available for download or orderable on CD in the language ordered, IBM will make the following services available at no additional charge to clients who order a new Version 7 HMC or upgrade an existing HMC with Version 7 code (#0962) with a Language Specify code other than English. This limited time offer is intended to support clients that lack the administrative skills to use the English language screens to set up their systems without the translated machine code for the HMC menus and display information and will not extend past the date those translations for download or on CD are made available by IBM. Contact the IBM Hardware Support Center (using the method you would normally use to obtain support for your hardware), and ask for Hardware Support. Be sure to have your HMC machine type and serial number available. Indicate that you have problems with installing the HMC using the English screens. An IBM SSR may be dispatched to your site and perform the following tasks (estimated total duration: 3 hours) a. Install the HMC. b. Configure the HMC. c. Ensure the HMC is operational. The HMC and attached servers will not be accessible to you while the SSR is working. After installation, you can contact your IBM Software Support Center for remote assistance IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 3

4 with any English-language messages displayed on the HMC. If an onsite visit is required to further interpret the English language text on the HMC screen, IBM may dispatch an IBM SSR to assist on site. IBM plans to offer translated menus and control information in the following HMC Specify Languages beginning third quarter 2007: Brazilian Portuguese Catalan Czech Republic Dutch English French German Hungarian Italian Japanese Korean Polish Portuguese Russian Simplified Chinese Slovakian Spanish Traditional Chinese All statements regarding IBM's plans, directions, and intent are subject to change or withdrawal without notice. Any reliance on these statements of general direction is at the relying party's sole risk and will not create liability or obligation for IBM. The IBM Network Manager Code is not available on the Hardware Management Console Licensed Machine Code, Version 7 (#0962), and it is not supported on the POWER6 processor-based servers for Infiniband Switches. Previous levels of the Hardware Management Console Licensed Machine Code Version 4, Version 5, and Version 6 (#0961) continue support of the IBM Network Manager Code for POWER5 processor-based servers for Infiniband Switches. Version 7 (#0962) users must use third-party switch management code to support Infiniband Switches. Accessibility by people with disabilities A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) containing details on accessibility compliance can be requested at Section 508 of the U.S. Rehabilitation Act The IBM Deskside Hardware Management Console is capable as of June 8, 2007, when used in accordance with IBM's associated documentation, of minimally satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided the user attaches another system that contains the assistive technology necessary to interact through a command-line interface. Business Partner information If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID). IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 4

5 BP Attachment for Announcement Letter Trademarks System p5, System i5, POWER5, POWER5+, POWER, i5/os, and Resource Link are trademarks of International Business Machines Corporation in the United States or other countries or both. Intel is a registered trademark of Intel Corporation. Other company, product, and service names may be trademarks or service marks of others. Discretionary information Firmware update for cryptographic coprocessor: New function is available for the IBM PCI-X Cryptographic Coprocessor for existing System p5 customers as well as new customers. This function is available for System p5 servers and selected I/O drawers. The cryptographic coprocessor is not a supported feature for the HMC. The PCI-X Cryptographic Coprocessor (FIPS4) (#4764) provides both cryptographic coprocessor and secure-key cryptographic accelerator functions in a single PCI-X card. The adapter is designed to deliver the security features and performance that you need to support On Demand Business and emerging digital signature applications and is now enhanced to provide Public-Key Cryptographic Standards (PKCS#11) APIs. The PKCS#11 APIs are included on the CD (LCD ) titled 4764 PCI-X Cryptographic Coprocessor Support Version 2.0. The CD is provided with new orders for feature number 4764 shipping on March 30, 2007, and is available to existing customers by contacting IBM service and requesting ECA 618. Only one API can be loaded on a single cryptographic card. Customers currently running with CCA support do not need ECA 618 as there is no newer version of the CCA function on this CD. For a complete list of supported servers and I/O drawers, refer to , dated July 25, Publications The following publication is shipped with the 7310 HMC: Title Order number IBM Systems Safety Notices G All other documentation for the 7310-C06 is shipped with the system on a CD-ROM with the IBM Systems Hardware Information Center (SK3T-8159). The documentation is also available through the console interface or at Services Global Technology Services IBM services include business consulting, outsourcing, hosting services, applications, and other technology management. These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-ibm offerings. IBM is your one-stop shop for IT support needs. For details on available services, contact your IBM representative or visit IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 5

6 For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit For details on education offerings related to specific products, visit Select your country, and then select the product as the category. Technical information Physical specifications Height: 438 mm (17.25 in) Width: 216 mm (8.5 in) Depth: 540 mm (21.25 in) Weight: 16.3 kg (36 lb) Operating environment Temperature: System on: 10 to 35 C (50 to 95 F) System off: 0 to 50 C (32 to 140 F) Relative humidity: 8% to 80% Sound power: 5.3 bels (maximum) Maximum altitude: 2,133 m (7,000 ft) Power requirements Operating voltage: Input voltage and frequency ranges automatically selected Low range: 100 to 127 V ac High range: 200 to 240 V ac Power source loading: 0.55 kva (maximum) Thermal output: 185 joules/sec (630 Btu/hr) (minimum) 523 joules/sec (1784 Btu/hr) (maximum) Equipment approvals and safety Japan VCCI, Class A Australia/New Zealand AS/NZS CISPR 22:2002, Class A CB Certificate and CB Test Report (IEC ) China CCEE (GB ) Taiwan BSMI CNS13438, Class A Russia/GOST ME01, IEC IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 6

7 IEC (CB Certificate and CB Test Report) CE Mark (EN55022 Class B, EN60950, and EN55024) CISPR 22, Class A TUV-GS (EN /IEC /ZH-618) FCC Part 15 of the FCC Rules (Class A) Canada ICES-003, issue 4, Class A UL/IEC (11) CAN C22.2 No NOM-019 (11) Hardware requirements Each HMC requires a graphics display, a keyboard, and a mouse. A logical connection between the HMC and each active partition on the server via a network is recommended. It is required for servers operating in dynamic LPAR mode. The 7310-C06 HMC has one physical Ethernet port. The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter (#5706) should be ordered to provide a second physical Ethernet connection. Two of these adapters can be ordered for a maximum of five Ethernet ports. Each server partition will have a physical connection to the network, and the HMC will be logically connected to each partition via its connection to the network. This connection is used to: Provide additional systems management, such as remote sharing support for i5/os system console sessions Collect and pass hardware service events to the HMC for automatic notification of error conditions to IBM Collect the total system inventory One Ethernet connection is required for each server controlled by the console. Either a serial port for modem attachment or an Ethernet connection is required if the Service Agent call-home function is implemented. Higher availability configurations may require the use of an Ethernet switch. An Ethernet switch will provide a physical connection from the HMC to each server rather than a logical Ethernet connection over a LAN. Information regarding HMC control of clustered servers under the control of CSM for AIX 5L and CSM for Linux on POWER software can be found in the IBM System Cluster 1600 Facts and Features Report available at sters/hardware/factsfeatures.html Information regarding supported Linux distributions on System p5 and System i5 servers is available at If redundant HMC function is wanted, the servers can be attached to two separate HMCs to address availability requirements. Environments may include 7310-C03, 7310-C04, 7310-C05, 7310-C06, 7310-CR2, 7310-CR3, or 7310-CR4 HMCs. Limitations The HMC is a dedicated-function device used only for the control and service functions of the POWER5 or POWER5+ processor-based servers it manages. It is not available for use as a general purpose computing resource. Each console must be configured with a graphics display, a keyboard, and a mouse. Various native language keyboards are available for the console. The HMC display menus and control information have been translated and limited to the following languages: IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 7

8 Belgian Dutch Brazilian Portuguese Czech English French German Hungarian Italian Japanese Korean Russian Simplified Chinese Slovakian Spanish Traditional Chinese The number of servers each console can control varies by server size and complexity. Each server partition will have a physical connection to the network, and the 7310-C06 console will be logically connected to each partition via the network connection. For details on the number of servers and LPARs supported, view the HMC Function and Hardware Prerequisites PDF at /set2/sas/f/hmc/power5/tips/home.html HMC performance may vary, depending on the unique combination of servers and LPARs implemented. Planning information Cable orders: One Ethernet cable is required to attach the HMC to the system central electronics complex. This cable can be customer-supplied or purchased from IBM. Security, auditability, and control This product uses the security and auditability features of the server operating system. Use of these facilities is optional. For servers with the i5/os operating system, the security measures supplied by i5/os are designed to reduce the risk of users changing or destroying data resources, but do not prevent it. The i5/os security features include the use of passwords, a security option to limit a user to only the functions provided by customer-designed menus, and a security option to limit read/write access for files, libraries, and folders during normal operations. To achieve increased security, the i5/os controls should be combined with physical security, division of duties, and other appropriate measures. This product uses the security and auditability features of the AIX 5L for POWER V5.2 or V5.3 operating system on an AIX partition that the HMC controls. The HMC network connection to the partitions is based on a component of IBM's Reliable, Scalable Cluster Technology (RSCT) called Resource Monitoring and Control (RMC). The only operations permitted through this connection are hardware error event collection and hardware inventory data collection, dynamic LPAR resource movement coordination for AIX and Linux partitions, and partition shutdown and reboot for AIX and Linux partitions. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. IBM Electronic Services IBM has transformed its delivery of hardware and software support services to put you on the IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 8

9 road to higher system availability. Electronic Services is a Web-enabled solution that offers an exclusive, no-additional-charge enhancement to the service and support available for IBM servers. These services are designed to provide the opportunity for greater system availability with faster problem resolution and preemptive monitoring. Electronic Services comprises two separate, but complementary, elements: Electronic Services news page and Electronic Services Agent. The Electronic Services news page is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. The news page enables you to gain easier access to IBM resources for assistance in resolving technical problems. The Electronic Service Agent is no-additional-charge software that resides on your server. It is designed to monitor events and transmit system inventory information to IBM on a periodic, client-defined timetable. The Electronic Service Agent is designed to automatically report hardware problems to IBM. Early knowledge about potential problems helps IBM to deliver proactive service that may result in higher system availability and performance. In addition, information collected through the Service Agent is made available to IBM service support representatives when they help answer your questions or diagnose problems. To learn how Electronic Services can work for you, visit Terms and conditions Volume orders: Contact your IBM representative. IBM credit corporation financing: No Warranty period: One year Warranty service: If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone, or electronically via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered Customer Replaceable Units (CRUs) will be provided as part of the machine's standard warranty service. Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country- and location-specific information. This product is covered by the following types of service. Customer replaceable unit service and on-site for other selected parts Customer replaceable unit (CRU) service IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU. Tier 1 CRU: Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation. Tier 2 CRU: You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge. Based upon availability, CRUs will be shipped for next-business-day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, return instructions and a container are shipped with the replacement CRU. You may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement. The following parts have been designated as Tier 1 CRU parts: AC power cord AC power supply IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 9

10 Battery Covers, front and side Disk drive Display DVD drive cable DVD drive External cables Fan Floppy drive Floppy drive cable Heat/Fan sink Keyboard Memory DIMM Modem Mouse PCI adapters Tape, diagnostics, and firmware media USB cable On-site service IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. 9 hours per day, Monday through Friday, excluding holidays, next-business-day response Non-IBM parts support IBM is now shipping machines with selected non-ibm parts that contain an IBM field replaceable unit (FRU) part number label. These parts are to be serviced during the IBM machine warranty period. IBM is covering the service on these selected non-ibm parts as an accommodation to their customers, and normal warranty service procedures for the IBM machine apply. Warranty service upgrades and maintenance service options: Warranty service upgrades During the warranty period, warranty service upgrades provide an enhanced level of on-site service for an additional charge. A warranty service upgrade must be purchased during the warranty period and is for a fixed term (duration). It is not refundable or transferable and may not be prorated. If required, IBM will provide the warranty service upgrade enhanced level of on-site service acquired by the customer. Service levels are response time objectives and are not guaranteed. IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. On-site service IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. The following service selections are available as warranty upgrades for your machine. 9 hours per day, Monday through Friday, excluding holidays, 4-hour average, same-business-day response 24 hours per day, 7 days a week, 4-hour average response IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 10

11 24 hours per day, 7 days a week, 2-hour average response CRUs may be provided as part of the machine's standard warranty CRU service except that you may install a CRU yourself or request IBM installation, at no additional charge, under one of the on-site service levels specified. For additional information on the CRU service, see warranty information. Maintenance services If required, IBM provides repair or exchange service depending on the types of maintenance service specified for the machine. IBM will attempt to resolve your problem over the telephone or electronically, via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered CRUs will be provided as part of the machine's standard maintenance service. Service levels are response time objectives and are not guaranteed. The specified level of maintenance service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country- and location-specific information. The following service selections are available as maintenance options for your machine type. On-site service IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. 9 hours per day, Monday through Friday, excluding holidays, next-business-day response 9 hours per day, Monday through Friday, excluding holidays, 4-hour average response 24 hours per day, 7 days a week, 4-hour average response 24 hours per day, 7 days a week, 2-hour average response CRU service If your problem can be resolved with a CRU (for example, keyboard, mouse, speaker, memory, or hard disk drive), and depending upon the maintenance service offerings in your geography, IBM will ship the CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. Based upon availability, CRUs will be shipped for next-business-day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, return instructions and a container are shipped with the replacement CRU. You may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement. CRUs may be provided as part of the machine's standard maintenance service except that you may install a CRU yourself or request IBM installation, at no additional charge, under any of the on-site service levels specified. Non-IBM parts support Under certain conditions, IBM repairs selected non-ibm parts at no additional charge for machines that are covered under warranty service upgrades or maintenance services. IBM service provides hardware problem determination on non-ibm parts (for example, adapter cards, PCMCIA cards, disk drives, memory) installed within IBM machines covered under warranty service upgrades or maintenance services and provides the labor to replace the failing parts at no additional charge. If IBM has a Technical Service Agreement with the manufacturer of the failing part, or if the failing part is an accommodations part (a part with an IBM FRU label), IBM may also source and replace the failing part at no additional charge. For all other non-ibm parts, customers are responsible for sourcing the parts. Installation labor is provided at no additional charge, if the machine is covered under a warranty service upgrade or a maintenance service. Usage plan machine: No IBM hourly service rate classification: Two When a type of service involves the exchange of a machine part, the replacement may not be IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 11

12 new, but will be in good working order. Field-installable features: Yes Model conversions: No Machine installation: Customer setup. Customers are responsible for installation according to the instructions IBM provides with the machine. Graduated program license charges apply: No Licensed machine code: IBM Machine Code is licensed for use by a customer on the IBM machine for which it was provided by IBM under the terms and conditions of the IBM License Agreement for Machine Code, to enable the machine to function in accordance with its specifications, and only for the capacity authorized by IBM and for which the customer has acquired. You can obtain the agreement by contacting your IBM representative or at upport/machine_warranties/machine_code.html IBM may release changes to the machine code. IBM plans to make the machine code changes available for download from the IBM System p server technical support Web site If the machine does not function as warranted and your problem can be resolved through your application of downloadable machine code, you are responsible for downloading and installing these designated machine code changes as IBM specifies. If you would prefer, you may request IBM to install downloadable machine code changes; however, you may be charged for that service. Educational allowance: A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance. The educational allowance is 15% for the products in this announcement. Prices For current prices, contact us at Shop-IBM ( ) or visit The following are newly announced features on the specific models of the IBM 7310-C06 machine type: Initial/ MES/ Feature Both/ RP Description number Support CSU MES IBM Deskside Hardware Yes Management Console IBM ExpressSeller Indicator 0050 Initial N/A No Hardware Management Console 0961 Both Yes No for POWER5 Licensed Machine Code Hardware Management Console 0962 MES Yes No Licensed Machine Code v7 Made in America Indicator 0983 Initial N/A No CCS Customer Service 0986 Initial N/A No Specify (U.S.) Note: These features are subject to an $8.00 Electronic Waste Recycling Fee (15-inch to 34-inch video device.) IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 12

13 IBM T120 Flat Panel Monitor 3643 Both Yes No IBM T119 Flat Panel Monitor 3644 Both Yes No IBM T117 Flat Panel Monitor 3645 Both Yes No 6-Foot Extender Cable for 4242 Both Yes No Displays (15-pin D-shell to 15-pin D-shell) Extender Cable Both Yes No USB Keyboards, 2M Custom Service Specify 5001 Initial N/A No IBM 2-Port 10/100/ Both Yes No Base-TX Ethernet PCI-X Adapter Full Width Quiet Touch Keyboard -- USB, U.S. English, #103P 5951 Both Yes No USB, French, # Both Yes No USB, Italian, # Both Yes No USB, German/Austrian, # Both Yes No USB, UK English, #166P 5955 Both Yes No USB, Spanish, # Both Yes No USB, Japanese, # Both Yes No USB, Brazilian Portuguese, 5958 Both Yes No #275 USB, Hungarian, # Both Yes No USB, Korean, # Both Yes No USB, Chinese, # Both Yes No USB, French Canadian, # Both Yes No USB, Canadian French, # Both Yes No USB, Belgian/UK, # Both Yes No USB, Swedish/Finnish, # Both Yes No USB, Danish, # Both Yes No USB, Bulgarian, # Both Yes No USB, Swiss/French/German, 5968 Both Yes No #150 USB, Norwegian,# Both Yes No USB, Dutch, # Both Yes No USB, Portuguese, # Both Yes No USB, Greek, # Both Yes No USB, Hebrew, # Both Yes No USB, Polish, # Both Yes No USB, Slovakian, # Both Yes No USB, Czech, # Both Yes No USB, Turkish, # Both Yes No USB, LA Spanish, # Both Yes No USB, Arabic, # Both Yes No USB, Thai, # Both Yes No USB, Russian, # Both Yes No USB, Slovenian, # Both Yes No USB, U.S. English Euro, 5983 Both Yes No #103P Power Cord (6-foot), To 6470 Both Yes No Wall (125V, 15A), Plug Type #4 Power Cord (9-foot), To 6471 Both Yes No Wall/OEM PDU, (125V, 15A), Plug Type #70 Power Cord (9-foot), To 6472 Both Yes No Wall/OEM PDU, (250V, 16A), Plug Type #18 Power Cord (9-foot), To 6473 Both Yes No Wall/OEM PDU, (250V, 10A), Plug Type 19 Power Cord (9-foot), To 6474 Both Yes No Wall/OEM PDU, (250V, 13A), Plug Type #23 Power Cord (9-foot), To 6475 Both Yes No Wall/OEM PDU, (250V, 16A), Plug Type #32 Power Cord (9-foot), To 6476 Both Yes No Wall/OEM PDU, (250V, 10A), Plug Type #24 Power Cord (9-foot), To 6477 Both Yes No Wall/OEM PDU, (250V, 16A), Plug Type #22 Power Cord (9-foot), To 6478 Both Yes No IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 13

14 Wall/OEM PDU, (250V, 16A), Plug Type #25 Power Cord (6-foot), To 6487 Both Yes No Wall, (250V, 15A), United States, Plug Type #5 Power Cord (9-foot), To 6488 Both Yes No Wall/OEM PDU, (125V, 15A or 250V, 10A), Plug Type #2 Power Cord (9-foot), To 6493 Both Yes No Wall/OEM PDU, (250V, 10A), Plug Type #62 Power Cord (9-foot), To 6494 Both Yes No Wall/OEM PDU, (250V, 10A), Plug Type #69 Power Cord (9-foot), To 6495 Both Yes No Wall/OEM PDU, (250V, 10A), Plug Type #73 Power Cord (9-foot), To 6496 Both Yes No Wall/OEM PDU, (250V, 10A), Plug Type #66 Power Cord (9-foot), To 6651 Both Yes No Wall/OEM PDU, (125V, 15A), Plug Type #75 Power Cord (9-foot), To 6659 Both Yes No Wall/OEM PDU, (250V, 15A), Plug Type #76 Power Cord (6-foot), To 6670 Both Yes No Wall (125V, 15A), Plug Type #59 (Denan marking) Power Cord (9-foot), To 6680 Both Yes No Wall/OEM PDU, (250V, 10A), Plug Type #6, Insulated Power Cord (6-foot), To 6687 Both Yes No Wall, (250V, 15A), Plug Type #57 (Denan marking) Ethernet Cable, 6M, 7801 Both Yes No Hardware Management Console to System Unit Ethernet Cable, 15M, 7802 Both Yes No Hardware Management Console to System Unit Mouse -- Business Black with 8841 Both Yes No Keyboard Attachment Cable HMC/Server Order Linkage 9069 Initial N/A No Indicator Language Group Specify U.S. English 9300 Initial N/A No French 9703 Initial N/A No German 9704 Initial N/A No Polish 9705 Initial N/A No Portuguese 9707 Initial N/A No Spanish 9708 Initial N/A No Italian 9711 Initial N/A No Canadian French 9712 Initial N/A No Japanese 9714 Initial N/A No Traditional Chinese (Taiwan) 9715 Initial N/A No Korean 9716 Initial N/A No Turkish 9718 Initial N/A No Hungarian 9719 Initial N/A No Slovakian 9720 Initial N/A No Russian 9721 Initial N/A No Simplified Chinese (PRC) 9722 Initial N/A No Czech 9724 Initial N/A No For ServiceElect (ESA) maintenance service charges, contact IBM Global Services at 888-IBM-4343 ( ). Order now To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner. IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 14

15 To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU ( ). Phone: 800-IBM-CALL ( ) Fax: 800-2IBM-FAX ( ) Internet: Mail: IBM Americas Call Centers Dept. Teleweb Customer Support, 9th floor 105 Moatfield Drive North York, Ontario Canada M3B 3R1 Reference: YE001 The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products. Note: Shipments will begin after the planned availability date. Trademarks System p5, i5/os, POWER, AIX 5L, System i5, iseries, POWER5, POWER5+, Electronic Service Agent, and System p are trademarks of International Business Machines Corporation in the United States or other countries or both. eserver, pseries, and AIX are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Linux is a trademark of Linus Torvalds in the United States, other countries or both. Other company, product, and service names may be trademarks or service marks of others. This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 15