IBM 7310-CR3 Rack-mounted Hardware Management Console performs resource management for configuring and operating IBM POWER5 servers

Transcription

1 Hardware Announcement January 25, 2005 IBM 7310-CR3 Rack-mounted Hardware Management Console performs resource management for configuring and operating IBM POWER5 servers Overview The IBM 7310-CR3 Rack-mounted Hardware Management Console (HMC) is a dedicated workstation that allows you to configure and manage partitions and Capacity on Demand on POWER5 servers. An integrated hardware management application helps you configure and partition the server through a GUI. In addition, operating system console support is provided for IBM i5/os using a 5250 programming interface. This can potentially save the cost of a separate IBM i5 console. The 7310 HMC helps you manage LPAR configurations to: Create and store LPAR profiles that define the processor, memory, and I/O resources allocated to an individual partition Start, stop, and reset a system partition Boot a partition or system by selecting a profile Display system and partition status Display a virtual operator panel of the contents for each partition or controlled system The IBM p5 590 and 595 and i5 595 must have access to an HMC. An HMC is required to manage any POWER5 server when Capacity Upgrade on Demand is implemented. The HMC offers a service focal point for the systems it controls. It is connected to a dedicated port on the service processor of the POWER5 system via an Ethernet connection. The Ethernet connections from HMC to p5 590 and 595 and i5 595 must be via private LAN, whereas other POWER5 systems can be either private or public. LAN tools are available for determining problems and providing service support, such as call-home and error log notification, through a modem or the Internet. Multiple POWER5 processor-based servers can be supported by one HMC, located locally or remotely attached. Key prerequisites A POWER5 server that supports an HMC Planned availability date February 18, 2005 At a glance The IBM 7310-CR3 Rack-mounted Hardware Management Console (HMC) is a dedicated workstation for system and partition control of POWER5 servers. The HMC delivers: Logical partitioning (LPAR) control Capacity on Demand resource control Creation and storage system and partition profiles Boot, start, and stop actions for the system or individual partitions Ability to display system and partition resources and status An imbedded DVD-RAM for easily creating and storing configuration backup information A service focal point with tools for determining problems and providing service support through the Internet or modem Remote sharing support for i5/os system console sessions through the 5250 Console Proxy p5 environments controlled by IBM Cluster Systems Management (CSM) V1.4, or later Renewable Agreement for Machine Control Program Remote Support For ordering, contact: Your IBM representative, an IBM Business Partner, or the Americas Call Centers at 800-IBM-CALL Reference: YE001 This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: IBM United States IBM is a registered trademark of International Business Machines Corporation

2 Description The Model 7310-CR3 has the following standard hardware attributes: Intel XEON-based, rack-mounted workstation 1U tall Mounts in a 19-inch system rack 1 GB of system memory 80 GB Serial ATA HDD DVD-RAM for backup One integrated serial port One graphics port Two integrated 10/100/1000 Mbps Ethernet ports Three USB ports Two PCI slots Optional chargeable external diskette drive Section 508 of the U.S. Rehabilitation Act The IBM 7310-CR3 Rack-mounted HMC is capable as of February 18, 2005, when used in accordance with IBM s associated documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. Business Partner information If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID). BP Attachment for Announcement Letter mem/sla.jsp?num= Trademarks POWER5 and ThinkVision are trademarks of International Business Machines Corporation in the United States or other countries or both. The e-business logo is a registered trademark of International Business Machines Corporation in the United States or other countries or both. Intel is a trademark of Intel Corporation. Other company, product, and service names may be trademarks or service marks of others

3 IBM US Announcement Supplemental Information January 25, 2005 Publications The IBM eserver Safety Notices (G ) documentation is shipped with the 7310 HMC: All other documentation for the 7310-CR3 is shipped with the system on a CD-ROM, eserver Hardware Information Center (SK3T-8159). The documentation is also available through the console interface or at Services Integrated Technology Services IBM services include business consulting, outsourcing, hosting services, applications, and other technology management. These services help you learn about, plan, install, manage, or optimize your IT infrastructure for e-business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-ibm offerings. IBM is your one-stop shop for IT support needs. For details on available services, contact your IBM representative or visit For details on education offerings related to specific products, visit Select your country, and then select the product as the category. Physical specifications 1U rack drawer Height: 4.37 cm (1.72 in) Width: cm (17.3 in) Depth: cm (27 in) Weight: 12.9 kg (28.4 lb) Operating environment Technical information Temperature at less than 914 m (3,000 ft): 10 to 35 C (50 to 95 F) Temperature at 914 to 2,133 m (3,000 to 7,000 ft): 10 to 33 C (50 to 90 F) Relative humidity: 8% to 80% Sound power: 4.4 bels (maximum) Maximum altitude: 2,133 m (7,000 ft) Power requirements: Operating voltage: 110 V or 220 V ac 50/60 Hz (switch control on back) (nominal) V ac; 50 Hz or 60 Hz, 3.5 A (nominal) V ac; 50 Hz or 60 Hz, 1.75 A Power source loading: 0.55 kva (maximum) Thermal output: 550 joules/sec (1,878 Btu/hr) (maximum) EMC conformance classification: This equipment is subject to FCC rules, and it shall comply with the appropriate FCC rules before final delivery to the buyer or centers of distribution. U.S. FCC CFR47 Part 15 Class A Europe CISPR 22 Class A; CE Mark of Conformity Japan VCCI Class A Korea Korean Requirement Class A Taiwan Class A Product safety/country testing/certification U.S.: UL Canada: CNL (CSA or cul) Germany/Europe: GS Mark (TUV, EN60950) Argentina: S-Mark, effective January 1, 2005 Mexico: NOM China: CCC Russia: GOST CE Mark: IEC (CB Report) Hardware requirements The 7310-CR3 mounts in a 19-inch system rack. The IBM 7014-T00 or -T42 racks are recommended. For IBM iseries servers (MT 9405/9406), feature number 0551 or 0553 represents the same rack. For OpenPower servers, a standard 19-inch rack is recommended. To ensure proper air flow for cooling, the 7310-CR3 requires a rack with a perforated door, such as the IBM 7014-T00 or -T42 (iseries #0551 or #0553). The front door must be removed if the 7310-CR3 is mounted in a rack where the door panel is of solid construction. Each HMC must have access to a graphics display, keyboard, and mouse. In addition to the displays offered as features of the HMC, the IBM 7316-TF2 and 7316-TF3 rack-mounted displays and associated VGA switch are supported as well as existing IBM T541H, P76, P77, P260, and P275 graphics displays. The 7316 display is recommended for situations where space is constrained and includes a travel keyboard and mouse. USB keyboards and mouse that are feature numbers of the HMC cannot be used with the A logical connection between the HMC and each active partition on the POWER5 server via a network is recommended. It is required for servers operating in dynamic LPAR mode. The Rack-mounted 7310-CR3 HMC has two physical Ethernet ports. One is for a physical connection to the POWER5 server, and the This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: IBM United States IBM is a registered trademark of International Business Machines Corporation

4 other can be used for a physical connection to the network. The 10/100 Mbps Ethernet PCI Adapter II (#4962) should be ordered to provide a second physical Ethernet connection. Each server partition will have a physical connection to the network, and the HMC will be logically connected to each partition via its connection to the network. This connection is used to: Provide additional systems management, such as remote sharing support for i5/os system console sessions Collect and pass hardware service events to the Hardware Management Console to automatically notify IBM of error conditions Collect the total system inventory One Ethernet connection is required for each POWER5 server controlled by the console. Either a serial port for modem attachment or an Ethernet connection is required if the Service Agent call-home function is implemented. A USB external 1.44 MB diskette drive (#2591) is available for the rack-mounted HMC. Functions on the HMC offer an option to use a diskette, including copying various key files and Vital Product Data (VPD) Console Proxy: The 5250 Console Proxy function provides local i5/os system console support via the HMC console. To provide additional operation flexibility, the Console Proxy s session sharing capability allows multiple workstations to attach to the HMC and act as 5250 consoles to the i5/os server. The workstations can be LAN-attached or WAN-attached to the HMC using Telnet5250 or TN5250 client support. This allows multiple system operators to consult on an operational question or for a remote operator to handle operational questions or issues. The Console Proxy provides the mechanisms to establish a connection with each individual client and multiplex the clients through a single connection through the Hardware Server component on the HMC to the target i5/os partitions. The number of connections depends on the capability of the server. A single instance of the Console Proxy runs on the HMC, providing this remote sharing capability for sessions to multiple partitions. Only one session applies toward the maximum number of partitions supported, even if multiple workstations are participating in the i5/os console activity. Language support is consistent with other functions of the HMC. To support the remote TN5250 sessions and the secure passage of user IDs and passwords to i5/os partitions, as well as session keys to share 5250 sessions between multiple users, the 5250 Console Proxy supports SSL encryption between the Console Proxy and the remote TN5250 clients. Limitations The HMC is a dedicated-function device used only for the control and service functions of the POWER5 servers it serves. It is not available for use as a general purpose computing resource. Each console must be configured with a graphics display, a keyboard, and a mouse. Various native language keyboards are available for the console. The HMC display menus and control information have been translated into the following languages: Belgian Dutch Brazilian Portuguese Czech English French German Hungarian Italian Japanese Korean Russian Simplified Chinese Slovakian Spanish Traditional Chinese The number of servers each console can control varies by server size and complexity. Each server partition will have a physical connection to the network and the 7310 console will be logically connected to each partition via the network connection. For details on the number of servers and LPARs supported, visit HMC performance may vary, depending on the unique combination of servers and LPARs implemented. The 7310 HMC only supports POWER5 servers. Information regarding HMC control of clustered servers under the control of Cluster Systems Management for AIX (CSM) can be found in the Scaling Statement section of the Family IBM eserver Cluster 1600, Sales Manual. Information regarding supported Linux distributions on POWER5 servers is available at: If redundant HMC function is desired, the POWER5 servers can be attached to two separate HMCs to address availability requirements. Environments may include 7310-C03 or 7310-CR2 HMCs when the HMC for POWER5 Licensed Machine Code is V4.4.0 provided in APAR MB00691, which is planned to be available February 18, For details, visit hmc/power5 Planning information Cable orders: One Ethernet cable is required to attach the HMC to the system central electronics complex. This cable can be customer-supplied or purchased from IBM. Security, auditability, and control This product uses the security and auditability features of the server operating system. Use of these facilities is optional. For servers with the i5/os operating system, the security measures supplied by i5/os are designed to reduce the risk of users changing or destroying data resources, but do not prevent it. The i5/os security features include the use of passwords, a security option to limit a user to only the functions provided by customer-designed menus, and a security option to limit read/write access for files, libraries, and folders during normal operations. To achieve increased security, the i5/os controls should be combined with physical security, division of duties, and other appropriate measures

5 This product uses the security and auditability features of the AIX 5L for POWER V5.2 or V5.3 operating system on an AIX partition that the HMC controls. The HMC network connection to the partitions is based on a component of IBM s Reliable, Scalable Cluster Technology (RSCT) called Resource Monitoring and Control (RMC). The only operations permitted through this connection are hardware error event collection and hardware inventory data collection, dynamic LPAR resource movement coordination for AIX and Linux partitions, and partition shutdown/reboot for AIX/Linux partitions. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. IBM Electronic Services IBM Global Services has transformed its delivery of hardware and software support services to put you on the road to higher systems availability. IBM Electronic Services is a Web-enabled solution that provides you with an exclusive, no-additional-charge enhancement to the service and support on the IBM eserver. You should benefit from greater system availability due to faster problem resolution and preemptive monitoring. IBM Electronic Services is comprised of two separate but complementary elements: IBM Electronic Services news page and IBM Electronic Service Agent. IBM Electronic Services news page provides you with a single Internet entry point that replaces the multiple entry points traditionally used by customers to access IBM Internet services and support. By using the news page, it enables you to gain easier access to IBM resources for assistance in resolving technical problems. The IBM Electronic Service Agent is no-additional-charge software that resides on your IBM eserver system that is designed to proactively monitor events and transmit system inventory information to IBM on a periodic customer-defined timetable. The IBM Electronic Service Agent tracks system inventory, hardware error logs, and performance information. If the server is under a current IBM maintenance service agreement or within the IBM warranty period, the Service Agent automatically reports hardware problems to IBM. Early knowledge about potential problems enables IBM to provide proactive service that maintains higher system availability and performance. In addition, information collected through the Service Agent will be made available to IBM service support representatives when they are helping answer your questions or diagnosing problems. To learn how IBM Electronic Services can work for you, visit Terms and conditions This product is available for purchase under the terms of the IBM Customer Agreement. Each IBM machine is manufactured from parts that may be new or used. In some cases, a machine may not be new and may have been previously installed. Regardless, IBM s appropriate warranty terms apply. Volume orders: Contact your IBM representative. IBM Global Financing: No Warranty period: One year Warranty service: If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone, or electronically via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered customer replaceable units (CRUs) will be provided as part of the machine s standard warranty service. Service levels are time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM s normal service area. Contact your local IBM representative or your reseller for country- and location-specific information. CRU service and on-site service for other selected parts CRU service: If your problem can be resolved with a CRU (for example, keyboard, mouse, speaker, memory, HDD, and other easily replaceable parts), IBM will ship these parts to you for replacement by you. If IBM instructs you to return the replaced CRU, you are responsible for returning it to IBM in accordance with IBM s instructions. If you do not return the defective CRU, if IBM so instructs, within 30 days of your receipt of the replacement CRU, IBM may charge you for the replacement. IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU. Tier 1 CRUs Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation. For machines with on-site same-day service, IBM will replace a Tier 1 CRU part at your request, at no additional charge. Tier 2 CRUs You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge. Based upon availability, CRUs will be shipped for next-business-day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, return instructions and a container are shipped with the replacement CRU. You may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of receipt of the replacement. The following parts have been designated as Tier 1 CRU parts: AC power cord AC power supply CMOS battery Disk drive Display Fan PCI adapter

6 PCI riser Keyboard Memory Mouse VRM Processor On-site service IBM on-site repair (IOR): 9 hours per day, Monday through Friday, excluding holidays, next-business-day (NBD) IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. ServiceSuite and ServiceElect (formerly ESA) maintenance: ServiceElect (Z ) and ServiceSuite (Z ) Statements of Work Warranty service upgrades On-site service IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. The following service selections are available as warranty upgrades for your machine type. For machines with on-site same-day service, IBM will replace a Tier 1 CRU part at your request, at no additional charge. For additional information on the CRU service, see the warranty information. 9 hours per day, Monday through Friday, excluding holidays, 4-hour average, same-business-day 24 hours per day, 7 days a week, 4-hour average 24 hours per day, 7 days a week, 2-hour average Maintenance services: If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone or electronically, via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered CRUs will be provided as part of the machine s standard maintenance service. Service levels are time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM s normal service area. Contact your local IBM representative or your reseller for country- and location-specific information. CRU service and on-site service for other selected parts CRU service: IBM provides replacement CRUs to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. CRUs are designated as being either a Tier 1 or a Tier 2 CRU. Tier 1 CRUs Installation of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation. For machines with On-site same-day service, IBM will replace a Tier 1 CRU part at your request, at no additional charge. Tier 2 CRUs You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge. Based upon availability, CRUs will be shipped for NBD delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, return instructions and a container are shipped with the replacement CRU. You may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of receipt of the replacement. The following parts have been designated as Tier 1 CRU parts: Not applicable On-site service: IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well-lit, and suitable for the purpose. The following service selections are available as maintenance options for your machine type: 9 hours per day, Monday through Friday, excluding holidays, NBD 9 hours per day, Monday through Friday, excluding holidays, 4-hour average, same-business-day 24 hours per day, 7 days a week, 4-hour average 24 hours per day, 7 days a week, 2-hour average Maintenance service: The preferred go-to-market offerings are ServiceElect and ServiceSuite. However, ICA legacy contracts will still be available for current customers until they are withdrawn. Usage plan machine: No IBM hourly service rate classification: Two When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order. Field-installable features: Yes Model conversions: No Machine installation: Customer setup. Customers are responsible for installation according to the instructions IBM provides with the machine. Graduated charges: No Licensed machine code: IBM machine code is licensed for use by a customer on the IBM machine for which it was provided by IBM under the terms and conditions of the IBM License Agreement for Machine Code, to enable the machine to function in accordance with its specifications, and only for the capacity authorized by IBM and for which

7 the customer has paid. Machine code may sometimes be referred to as Licensed Internal Code (LIC) in documentation or on the machine with which the machine code was delivered. All such code, whether referred to or marked as machine code, LIC, or LIC, is subject to the IBM License Agreement for Machine Code. You can obtain the agreement at warranties/machine_code.html You can also obtain the agreement by contacting your IBM representative. Should it become necessary for IBM to make changes to machine code, IBM will make the changes available at the IBM technical support page on ibm.com. If the machine does not function as warranted and your problem can be resolved through your application of machine code changes, you are responsible for downloading and installing the designated machine code changes as IBM specifies. You may request IBM to install machine code changes; however, you may be charged for the installation. A renewable remote support offering governed by the Agreement for Machine Control Program Remote Support is available for 7310 models. Ongoing telephone assistance is offered for routine installation, configuration, and usage (how-to) questions. One year of remote support is mandatory for all new orders. Educational allowance: A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance

8 Prices The following are newly announced features on the specified models of the IBM 7310 machine type: Purchase Description price MMMC 1 CSU Machine type/model 7310-CR3 Rock-mounted HMC $3,800 $55 Yes 1 Minimum monthly maintenance charge Initial/ Feature Purchase MES/ RP Description number price both CSU MES Machine type/model 7310-CR3 External USB 1.44 MB 2591 $ 83 Both Yes No Diskette Drive Power Cord (14-foot), Drawer Both Yes No To OEM PDU (125 V, 15 A), Plug Type #59 (DENAN marking) Power Cord (14-foot), Drawer Both Yes No to OEM PDU, (250 V, 15 A), Plug Type #5 (DENAN marking) Power Cord (6-foot), To Wall Both Yes No (125 V, 15 A), Plug Type #59 (DENAN marking) Power Cord (9-foot), To Both Yes No 10 A), Plug Type #6, Insulated Power Cord (6-foot), To Wall, Both Yes No (250 V, 15 A), Plug Type #5 (DENAN marking) HMC for POWER5 Licensed Initial Machine Code CCS Customer Service Specify 0986 NC Initial (U.S.) ThinkVision C inch Both Yes No Color Monitor IBM T541H /L150p 15 TFT Both Yes No Color Monitor IBM C220p 21-inch Color Both Yes No Monitor, Business Black, and Cable ThinkVision L170p Flat Both Yes No Panel Monitor 6-Foot Extender Cable for Both Yes No Displays (15-pin D-shell to 15-pin D-shell) Extender Cable USB Both Yes No Keyboards, 2M Rack Indicator, Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No Rack # Both Yes No

9 Initial/ Feature Purchase MES/ RP Description number price both CSU MES 10/100 Mbps Ethernet 4962 $412 Both Yes No PCI Adapter II Customer Service Specify 5001 NC Initial Power Cable Drawer Both Yes No to IBM PDU, 14-foot, 250 V/10 A Power Cord (14-foot), Both Yes No Drawer to OEM PDU (125 V, 15 A), Plug Type #4 Power Cord (14-foot), Both Yes No Drawer to OEM PDU, (250 V, 15 A), United States, Plug Type #5 Power Cord (6-foot), To Both Yes No Wall (125 V, 15 A), Plug Type #4 Power Cord (9-foot), To Both Yes No Wall/OEM PDU, (125 V, 15 A), Plug Type #70 Power Cord (9-foot), To Both Yes No 16 A), Plug Type #18 Power Cord (9-foot), To Both Yes No 10 A), Plug Type 19 Power Cord (9-foot), To Both Yes No 13 A), Plug Type #23 Power Cord (9-foot), To Both Yes No 16A), Plug Type #32 Power Cord (9-foot), To Both Yes No 10 A), Plug Type #24 Power Cord (9-foot), To Both Yes No 16 A), Plug Type #22 Power Cord (9-foot), To Both Yes No 16 A), Plug Type #25 Power Cord (6-foot), To Both Yes No Wall, (250 V, 15 A), United States, Plug Type #5 Power Cord (9-foot), To Both Yes No Wall/OEM PDU, (125 V, 15 A or 250 V, 10 A ), Plug Type #2 Power Cord (9-foot), To Both Yes No 10 A), Plug Type #62 Power Cord (9-foot), To Both Yes No 10 A), Plug Type #69 Power Cord (9-foot), To Both Yes No 10 A), Plug Type #73 Power Cord (9-foot), To Both Yes No 10 A), Plug Type #66 Ethernet Cable, 6M, HMC Both Yes No to System Unit Ethernet Cable, 15M, HMC Both Yes No to System Unit

10 Initial/ Feature Purchase MES/ RP Description number price both CSU MES Quiet Touch Keyboard USB, Business Black, U.S. English, #103P 8800 $83 Both Yes No French, # Both Yes No Italian, # Both Yes No German Austrian, # Both Yes No U.K. English, # Both Yes No Spanish, # Both Yes No Japanese, # Both Yes No Brazilian/Portuguese, # Both Yes No Dutch, # Both Yes No Hungarian, # Both Yes No Slovakian, # Both Yes No Czech, # Both Yes No LA Spanish, # Both Yes No Korean, # Both Yes No Chinese # Both Yes No French Canadian, # Both Yes No Russian, # Both Yes No U.S. English (EMEA), #103P Both Yes No Mouse Business Both Yes No Black with Keyboard Attachment Cable Southern Hemisphere Both Yes No Designator for Monitors Language Group Specify: U.S. English 9300 NC Initial French 9703 NC Initial German 9704 NC Initial Polish 9705 NC Initial Portuguese 9707 NC Initial Spanish 9708 NC Initial Italian 9711 NC Initial Canadian French 9712 NC Initial Japanese 9714 NC Initial Traditional Chinese (Taiwan) 9715 NC Initial Korean 9716 NC Initial Turkish 9718 NC Initial Hungarian 9719 NC Initial Slovakian 9720 NC Initial Russian 9721 NC Initial Simplified Chinese (PRC) 9722 NC Initial Czech 9724 NC Initial The following are features newly announced for the RS/6000 or pseries 7014 machine type: Initial/ Feature Purchase MES/ Description Model number price both Rack Content Specify: T NC Initial 7310/CR3 1U T42 Initial For ServiceElect (ESA) maintenance service charges, contact IBM Global Services at 888-IBM-4343 ( )

11 Order now To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner. To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU ( ). Phone: 800-IBM-CALL ( ) Fax: 800-2IBM-FAX ( ) Internet: ibm Mail: IBM Americas Call Centers Dept: IBM CALL, 11th Floor 105 Moatfield Drive North York, Ontario Canada M3B 3R1 Reference: YE001 The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products. Note: Shipments will begin after February 18, Trademarks iseries, OpenPower, POWER5, POWER, Electronic Service Agent, ServiceSuite, and ThinkVision are trademarks of International Business Machines Corporation in the United States or other countries or both. The e-business logo, eserver, AIX, pseries, and RS/6000 are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Linux is a trademark of Linus Torvalds in the United States, other countries or both Other company, product, and service names may be trademarks or service marks of others