More Precision. Draw-wire displacement sensors
|
|
- Rosalind Cummings
- 5 years ago
- Views:
Transcription
1 Länna, S SKOGÅS Ordertel Växel Orderfax Teknisk Internet More recision wiresensor Draw-wire displacement sensors
2 2 Draw-wire displacement and position sensors - Measuring ranges to 50,000mm - Resolution quasi infinite - Compact overall design - Easy mounting for any application - High reliability and long life cycle - nalog and digital outputs rinciple Draw-wire displacement sensors measure linear movements using a highly flexible steel cable. The cable drum is attached to a sensor element which provides a proportional output signal. Measurements are performed with high accuracy and high dynamic response. The use of high quality components guarantees a long life cycle and high operational reliability. MICRO-ESILON offers a wide selection of draw-wire displacement sensors with numerous types of output signal. This means that each customer has the opportunity of selec- ting the best sensor for his application. Choose between analog and digital outputs to optimize your individual measurement task. OEM-solutions for customized integration possible. wiresensors are application friendly due to the excellent measurement range to size ratio and the fact that they are easy to mount and use. The rugged sensor construction ensures reliable operation even under difficult ambient conditions. wire clip sensor element spring rubber buffer measuring wire wire drum ball bearing aluminum housing Sensor design WDS-60
3 3 Measuring range (mm) Model page MK30 analog 6-7 MK30 digital E E 8-9 MK46 analog MK46 digital E MK 77 analog MK 77 digital E MK 88 analog U I U I U I MK 120 analog U I U I U I MM analog M/MW analog analog U I U I U I U I U I U I U I digital E E analog U I U I digital E analog U I U I U I U I U I U I digital E E E E digital E E E mechanics M M M M M M M M M M M potentiometer U voltage I current E incremental encoder absolute encoder M mechanics vailable sensor series wiresensor MK30/MK77/MK88/MK120 wiresensor MM/MW wiresensor 60/96 wiresensor 115 wiresensor 200 wiresensor mechanics
4 4 pplications wiresensor ositioning of catering trucks at irbus 380 ositioning of operating tables Variable support for mobile cranes and cherry picker platforms Release of satellites into space
5 5 Displacement measurement on slag transporter osition measurement on X-ray machines Lift-height measurement in fork-lift trucks Height of lifting platforms on automobile production lines
6 6 Draw-wire sensors wiresensor MK30 analog - Robust plastic housing - Customized versions for OEM - Conductive plastic/wire/ hybrid potentiometer - Smallest design in its class Model MK30- (Measuring range 50mm) Ø8 Ø4.5 2 Ø3 mounting hole 3x Ø2.7 3 pin mounting clip with screw M (WS-500-MK30) 12 (WS-750-MK30) ø ø9 ø ~ ø polisher outside inside Ø Model MK30- (Measuring range 150/250/500/750/1000/1250mm) oti 10 kohm screw M
7 7 Model WS-50-MK30 WS-150-MK30 WS-250-MK30 WS-500-MK30 WS-750-MK30 Output Measuring range 50mm 150mm 250mm 500mm 750mm conductive plastic pot. 50 ±0.5% FSO 0.25mm wire pot. 25 ±0.25% FSO mm 1.25mm 1.87mm Linearität hybrid pot. 25 ±0.25% FSO mm hybrid pot. 10 ±0.1% FSO mm 0.5mm 0.75mm conductive plastic pot. quasi infinite Resolution wire pot mm 0.1mm 0.15mm 0.2mm conductive plastic pot./hybrid pot. quasi infinite Sensor element conductive plastic/wire/hybrid potentiometer Temperature range C housing plastic Material draw wire coated polyamid stainless steel (ø 0.36mm) Wire mounting eyelet Sensor mounting mounting holes / mounting grooves Wire acceleration appr. 5g Wire retraction force (min) appr.1n Wire extension force (max) appr. 2.5N rotection class I 20 Electrical connection soldering tag Weight FSO = Full Scale Output Specifications for analog outputs on page 47. appr. 45g rticle description WS MK30-25 Model MK30 Measuring range in mm Output option: potentiometer 50 (linearity ±0.5 % FSO) potentiometer 25 (linearity ±0.25 % FSO) potentiometer 10 (linearity ±0.1 % FSO)
8 8 Draw-wire sensors wiresensor MK30 digital - Robust plastic housing - Customized versions for OEM - Smallest design in its class - Incremental encoder Model MK30 8 (WS-500-MK-E) 12 (WS-750-MK30-E) ø ø4.5 ø3 mounting clip with screw M ø ø2.7 mounting hole
9 9 Model WS-500-MK30 WS-750-MK30 Output E/E830 E/E830 Measuring range 500mm 750mm Linearity E ±0.05% FSO 0.25mm 0.375mm Resolution Sensor element Temperature range Material Wire mounting Sensor mounting Wire acceleration Wire retraction force (min) housing draw wire 10 ulses/mm 6.7 ulses/mm 0.1mm Incremental encoder C plastic coated polyamid stainless steel (ø 0.36mm) eyelet mounting holes / mounting grooves appr. 5g appr. 1N Wire extension force (max) appr. 2.5N rotection class Electrical connection Weight FSO = Full Scale Output Specifications for digital outputs on page 48. I54 cable radial, 1m ca. 80g 0.15mm rticle description WS MK30 - E830 Model MK30 Measuring range in mm Output option: encoder E ( VDC) encoder E830 ( VDC)
10 10 Draw-wire sensors wiresensor MK46 analog - Robust plastic housing - Customized versions for OEM - Wire/hybrid potentiometer Model MK46 Output 10/25 18 (WS-1000-MK46-) 20 (WS-1250-MK46-) 12.8 ø4.5 2 ø2.7 mounting hole ø8 ø3 mounting clip with screw M ø Model MK46 Output CR (WS-1000-MK46) 20 (WS-1250-MK46) ø8 ø4.5 3x ø2.7 mounting hole ø mounting clip with screw M
11 11 Model WS-1000-MK46 WS-1250-MK46 Output Measuring range 1000mm 1250mm Linearity Resolution Sensor element Temperature range Material Wire mounting Sensor mounting Wire acceleration Wire retraction force (min) wire pot. 25 ±0.25% FSO 2.5mm 3.12mm hybrid pot. 10 ±0.1% FSO 1mm 1.2mm wire pot mm 0.4mm hybrid pot. 10 housing draw wire quasi infinite wire/hybrid potentiometer C plastic coated polyamid stainless steel (ø 0.36 mm) eyelet mounting holes / mounting grooves appr. 5g appr. 1N Wire extension force (max) 1.6N 1.5N rotection class I 20 Electrical connection Weight FSO = Full Scale Output Specifications for analog outputs on page , 25 soldering tag CR-25 integrated cable, radial, 1m appr. 80g rticle description WS MK46-25 Model MK46 Measuring range in mm Output option: potentiometer 25 (linearity ±0.25% FSO) potentiometer 10 (linearity ±0.1% FSO) potentiometer CR-25, integrated cable, radial, 1m
12 12 Draw-wire sensors wiresensor MK46 digital - Robust plastic housing - Customized versions for OEM - Incremental encoder Model MK ø8 2 ø2.7 mounting hole ø4.5 ø3 mounting clip with screw M ø
13 13 Model Output Measuring range WS-1250-MK46 E/E mm Linearity encoder ±0.05% FSO 0.625mm Resolution Sensor element Temperature range Material Wire mounting Sensor mounting Wire acceleration housing draw wire 4 ulses/mm 0.25mm incremental encoder C plastic coated polyamid stainless steel (ø 0.36mm) eyelet mounting holes / mounting grooves appr. 5g Wire retraction force (min) appr. 1N Wire extension force (max) 1.5N rotection class I54 Electrical connection Weight cable radial, 1m appr. 120g FSO = Full Scale Output Specifications for digital outputs on page 48. rticle description WS MK46 - E Model MK46 Measuring range in mm Output option: encoder E ( VDC) encoder E830 ( VDC)
14 14 Draw-wire sensors wiresensor MK77 analog - Robust plastic housing - Customized versions for OEM - Wire potentiometer Model MK77 Output ø8 ø ø3.2 mounting hole ø4.5 ø3 mounting clip with screw M ø ~ Model MK77 Output CR ø ø3.2 mounting hole ø4.5 ø3 mounting clip with screw M ~
15 15 Model WS-2100-MK77 Output Measuring range mm Linearity wire pot. ±0.25% FSO 5.25mm Resolution wire pot. 0.55mm Sensor element wire potentiometer Temperature range -20 to 80 C Material Wire mounting Sensor mounting Cable diameter housing draw wire plastic coated polyamid stainless steel eyelet mounting holes / mounting grooves 0.45mm Wire retraction force (min) 3.5N Wire extension force (max) Wire acceleration rotection class I 20 Electrical connection Weight FSO = Full Scale Output Specifications for analog outputs on page CR CR-25 5N 5g soldering tag integrated cable radial, 1m ca. 0.2kg ca. 0.25kg rticle description WS MK77-25 Model MK77 Measuring range in mm Output option: potentiometer 25 (linearity ±0.25% FSO) potentiometer CR-25, integrated cable, radial, 1m
16 16 Draw-wire sensors wiresensor MK77 digital - Robust plastic housing - Customized versions for OEM - Incremental/absolute encoder Model MK ø3.2 mounting hole ø8 ø4.5 ø3 mounting clip with screwm ø ~
17 17 Model WS-2100-MK77 Output Measuring range Linearity Resolution Sensor element E/E mm 1.05mm ±0.05% FSO 0.43mm incremental encoder Temperature range -20 to 80 C Material Wire mounting Cable diameter Sensor mounting housing draw wire lastic coated polyamid stainless steel (ø 0.45mm) Eyelet 0.45mm mounting holes / mounting grooves Wire retraction force (min) 3.5N Wire extension force (max) Wire acceleration rotection class I 54 Electrical connection Weight FSO = Full Scale Output Specifications for digital outputs on page 48. 5N 5g cable radial, 2m appr. 0.27kg rticle description WS MK77 - E Model MK77 Measuring range in mm Output option: encoder E ( VDC) encoder E830 ( VDC)
18 18 Draw-wire sensors wiresensor MK88 analog - Robust plastic housing - Customized versions for OEM - otentiometer, current and voltage output Model MK ø8 3x ø4.2 mounting holes DO NOT OEN THE SCREWS approx ø
19 19 Modell WS-2300-MK88 (01) WS-3500-MK88 (01) WS-5000-MK88 (01) Output Sensor element /U/I potentiometer Measuring range 2300mm 3500mm 5000mm Linearity ±0.15 % FSO ±0.3 % FSO ±0.4 % FSO Resolution/sensitivity quasi infinite Temperature range -20 to 80 C Material Wire diameter Wire mounting Sensor mounting Wire retraction force (min) Wire extension force (max) Wire acceleration (max) housing plastic, 6 GF 30 wire protection cap coated polyamid stainless steel aluminium ø0.45mm wire clip mounting holes / mounting grooves on the sensor housing 4 N 9 N appr. 7g rotection class I 65 Electrical connection integrated cable, 1m Weight (with cable) g FSO = Full Scale Output Specifications for analog outputs on page 47. rticle description WS MK88 - CR - Model MK88 Measuring range in mm Output option: : potentiometer U: voltage I: current Connection CR: integrated cable, radial, 1m
20 20 Draw-wire sensors wiresensor MK120 analog - Robust plastic housing - Customized versions for OEM - otentiometer, current and voltage output Model MK120 (Measuring range 3000, 5000mm) mounting hole M ø Model MK120 (Measuring range 7500mm) mounting hole M ø
21 21 Model WS-3000-MK120 WS-5000-MK120 WS-7500-MK120 Output Measuring range 3000mm 5000mm 7500mm Linearity ±0.15% FSO ±4.5mm ±7.5mm ±11.25mm Resolution /U/I quasi infinite Temperature range -20 to 80 C Material Wire mounting housing draw wire plastic mm coated wire clip Wire acceleration 2.5g 1.5g Wire retraction force (min) 5.5N 5N 7N Wire extension force (max) 8N 13N Electrical connection integrated cable, radial, 1m length rotection class I 65 Weight 0.75kg 0.9kg FSO = Full Scale Output Specifications for analog outputs on page 47. rticle description WS MK120 - CR - Model MK120 Measuring range in mm Output option: : potentiometer U: voltage I: current Connection CR: integrated cable, radial, 1m
22 22 Draw-wire sensors wiresensor MM analog - Extreme compact miniature sensor - Flexible mounting via swivel flange - High speed measurement, wire acceleration up to 100g Model MM x nut M4 (WS=7) ø7.5 ø ø R> x ø x screw M3 (WS=1.5) Measuring range (mm) (mm) / HG / 250-HG 70
23 23 Model WDS-50 MM WDS-150 MM WDS-250 MM Output Measuring range 50mm 150mm 250mm Linearity Resolution ±0.2% FSO - ±0.3mm ±0.5mm ±0.25% FSO ±0.125mm - - quasi infinite Sensor element conductive plastic potentiometer hybrid potentiometer Temperature range Material housing draw wire C aluminium stainless steel (ø 0.45mm) Sensor mounting swivel flange in two axes 180 / 360 Wire mounting thread M4 Wire acceleration appr. 25g (Option HG: 100g) Wire retraction force (min) 1.5N (Option HG: 10N) Wire extension force (max) 3.5N (Option HG: 17N) rotection class I 65 Vibration Mechanical shock Electrical connection Weight FSO = Full Scale Output Specifications for digital outputs on page g, 20Hz - 2kHz 50g, 20ms integrated cable, axial, 3-leads, 1m long appr. 150g rticle description WDS MM - C - - HG Model MM Measuring range in mm Option HG: Wire acceleration up to 100g Output option: : potentiometer Connection: C: integrated cable, axial, 1m
24 24 Draw-wire sensors wiresensor M / MW analog - Miniature design - Optional I 67 (MW) - For fast measurement and harsh environments Model M / MW 17,5 2x nut M4 (WS=7) 21 ø44 R> ø5, x screw M3 (WS=1.5) B x ø4,3 Measuring range (mm) (mm) B (mm) 100 / 300 / 500 / 1000-M / 300 / 500 / 1000-MW
25 25 Model WDS-100 M(W) WDS-300 M(W) WDS-500 M(W) WDS-1000 M(W) Output Measuring range 100mm 300mm 500mm 1000mm Linearity ±0.1% FSO mm 1mm ±0.25% FSO mm - - ±0.5% FSO 0.5mm Resolution 0.15mm 0.2mm quasi infinite Sensor element wire potentiometer hybrid potentiometer Temperature range Material Wire mounting housing draw wire C aluminium stainless steel (ø 0.45mm) thread M4 Sensor mounting swivel flange in two axes 180 / 360 Wire acceleration appr. 30g Wire retraction force (min) 7N 7N 6.5N 5N Wire extension force (max) 8.5N 8.5N 8.5N 8N rotection class Vibration Mechanical shock Electrical connection Weight FSO = Full Scale Output Specifications for analog outputs on page 47. series M I 65 series MW I 67 20g, 20Hz - 2kHz 50g, 10ms integrated cable, axial, 3-leads, 1m long appr. 270g rticle description WDS M - C - Output option: : potentiometer Connection: C: integrated cable, axial, 1m Model M / MW (I67) Measuring range in mm
26 26 Draw-wire sensors wiresensor 60 analog - Robust aluminium profile housing - Customized versions for OEM - otentiometer, current and voltage output Model 60 Output mounting grooves for M Measuring range (mm) (mm) 100 / 300 / 500 / ø / 750 / Model 60 Output U/I mounting grooves for M Measuring range (mm) (mm) 38.6 ø / 300 / 500 / / 750 /
27 27 Model WDS WDS WDS WDS WDS WDS WDS Output Measuring range mm Linearity Resolution ±0.1% FSO ±mm ±0.25% FSO ±mm ±0.5% FSO ±mm /U/I quasi infinite Sensor element conductive plastic/wire potentiometer hybrid potentiometer Temperature range Material Sensor mounting Wire mounting Wire acceleration housing draw wire C aluminium coated polyamid stainless steel (ø 0.45mm) mounting grooves in the housing wire clip appr g (dependent upon measuring range) Wire retraction force (min) N Wire extension force (max) N rotection class Vibration Mechanical shock Electrical connection Weight FSO = Full Scale Output Specifications for analog outputs on page 47. U/I I 65 (only if connected) 20g, 20Hz - 2kHz 50g, 10ms integrated cable, radial, 1m long flange connector, radial, 8-pin, DIN45326 appr. 370g rticle description WDS CR - Model 60 Measuring range in mm Output option: = potentiometer (with connection CR) U = voltage (with connection SR) I = current (with connection SR) Connection: SR: radial plug CR: integrated cable, radial, 1m
28 28 Draw-wire sensors wiresensor 60 digital - Robust aluminium profile housing - Customized versions for OEM - Incremental/absolute encoder Model 60 Output HTL/TTL Output SSI MR (mm) (mm) mounting mounting grooves for M4grooves for M ø mounting grooves for M ø ø58 ø Model 60 Output CO/B MR (mm) (mm)
29 29 Model WDS WDS Output HTL/ TTL/ B/ CO/ SSI Measuring range 1000mm 1500mm Linearity ±0.02% FSO ±0.2mm ±0.3mm Resolution Sensor element Temperature range HTL, TTL 0.067mm (15 ulses/mm) 0.1mm (10 ulses/mm) SSI, B, CO 0.012mm 0.018mm incremental encoder C Material Sensormontage Wire mounting housing draw wire aluminium coated polyamid stainless steel (ø 0.45mm) mounting grooves in the housing wire clip Wire acceleration 10g 15g Wire retraction force (min) 5N 3.5N Wire extension force (max) 7.5N 5.5N rotection class Vibration Mechanical shock I 65 (only if connected) 20g, 20Hz - 2kHz 50g, 10ms Electrical connection Weight FSO = Full Scale Output Specifications for digital outputs on page 48. HTL/TTL SSI B/CO integrated cable, radial, 1m long flange connector, radial, 12-pin bus cover appr. 1kg rticle description WDS CR - TTL Model 60 Measuring range in mm Output option: HTL TTL CO: CNopen B: rofibus D SSI Connection: SR (Output SSI): radial plug CR (Output HTL, TTL): integrated cable, radial, 1m BH (Output CO, B): bus cover
30 30 Draw-wire sensors wiresensor 96 analog - Robust aluminium profile housing - Customized versions for OEM - otentiometer, current and voltage output Model 96 Output 10 MR (mm) (mm) x set screw M4 36 4x M6 70 ø Model 96 Output U/I 10 MR (mm) (mm) x set screw M4 36 4x M6 ø
31 31 Model WDS WDS Output Measuring range mm Linearity ±0.1% FSO ±mm Resolution Sensor element Temperature range Material Sensor mounting Wire mounting Wire acceleration housing draw wire /U/I quasi infinite hybrid potentiometer C aluminium ø 0.8mm slot nuts wire clip Wire retraction force (min) 7.5N 5.5N Wire extension force (max) 11N 9N rotection class Vibration Mechanical shock Electrical connection Weight FSO = Full Scale Output Specifications for analog outputs on page 47. U/I 8g I 65 (only if connected) 20g, 20Hz - 2kHz 50g, 10ms integrated cable, radial, 1m long flange connector, axial, 8-pin DIN45326 appr. 1.1kg rticle description WDS C - Model 96 Measuring range in mm Output option: = potentiometer (with connection C) U = voltage (with connection SR) I = current (with connection SR) Connection: SR: radial plug C: integrated cable, axial, 1m
32 32 Draw-wire sensors wiresensor 96 digital - Robust aluminium profile housing - Incremental/absolute encoder Model 96 Output HTL/TTL MR (mm) (mm) ø x slot nut ø x M6 2x set screw M Output CO/B 10 Output SSI 10 ø13 ø ø58 ø
33 33 Model Output Measuring range WDS HTL/ TTL/ SSI/ B/ CO 3000mm Linearity ±0.02% FSO ±0.6mm Resolution HTL, TTL 0.087mm (11.53 pulses/mm) Resolution SSI, B, CO 0.032mm Sensor element Temperature range Material Sensor mounting Wire mounting Wire acceleration housing draw wire Incremental/absolute encoder C aluminium coated polyamid stainless steel (ø 0.8mm) slot nuts wire clip Wire retraction force (min) 5.5N Wire extension force (max) rotection class Vibration Mechanical shock Electrical connection Weight FSO = Full Scale Output Specifications for digital outputs on page 48. HTL, TTL SSI B, CO 7g 9N I 65 (only if connected) 20g, 20Hz - 2kHz 50g, 10ms integrated cable, radial, 1m long flange connector, radial, 12-pin bus cover appr. 1.7kg rticle description WDS CR - TTL Model 96 Measuring range in mm Output option: HTL TTL CO: CNopen B: rofibus D SSI Connection: SR (Output SSI): radial plug CR (Output HTL, TTL): integrated cable, radial, 1m BH (Output CO, B): bus cover
34 34 Draw-wire sensors wiresensor 115 analog - Robust aluminium profile housing - Customized versions for OEM - otentiometer, current and voltage output Model 115 (Measuring range 3000/4000/5000mm) Output UI Output 50 MR (mm) (mm) / x slot nuts 2x set screw M x set screw M4 4x M6 ø Model 115 (Measuring ranges 7500/10000/15000mm) MR (mm) (mm) B (mm) B 36
35 35 Model WDS WDS WDS WDS WDS WDS Measuring range 3000mm 4000mm 5000mm 7500mm 10000mm 15000mm Output Linearity Resolution Sensor element Temperature range ±0.1% FSO ±3mm ±0.15% FSO - /U/I ±6mm ±7.5mm ±11.3mm ±15mm ±22.5mm quasi infinite hybrid potentiometer C Material Sensor mounting Wire mounting Wire acceleration housing aluminium draw wire coated polyamid stainless steel (ø 0.45mm) coated polyamid stainless steel (ø 1.0mm) slot nut wire clip appr. 6g Wire retraction force (min) 4.5N 4N 4N 8N 8N 8N Wire extension force (max) 8N 8.5N 9N 24N 21N 25N rotection class Vibration Mechanical shock Electrical connection U/I I 65 (only if connected) 20g, 20Hz - 2kHz 50g, 20ms integrated cable, axial, 1m long flange connector, radial, 8-pin, DIN45326 Weight appr. 1.1kg 2.2kg 3.2kg 3.5kg FSO = Full Scale Output Specification for analog outputs on page 47. rticle description WDS C - Model 115 Measuring range in mm : potentiometer U: voltage I: current Connection: SR: radial plug S: axial plug C: integrated cable, axial, 1m Connection C: /4000/5000 Connection S: /10000/15000 Connection SR: /4000/5000 Connection S: /10000/15000 Connection SR: /4000/5000 Connection S: /10000/15000
36 36 Draw-wire sensors wiresensor 115 digital - Robust aluminium profile housing - Customized versions for OEM - Incremental/absolute encoder Model ø30 ø20.2 2x slot nuts 2x set screw M4 4x M6 36 Output HTL/TTL 4 Output SSI Output CO/B 4 4 Ø58 Ø58 Ø ca B 67.2 B B MR (mm) (mm) B (mm)
37 37 Model WDS WDS WDS WDS Measuring range 5000mm 7500mm 10000mm 15000mm Output Linearity Resolution Sensor element Temperature range Material Sensor mounting Wire mounting HTL/ TTL/ SSI/ B/ CO ±0.01% FSO - - ±1mm ±1.5mm ±0.02% FSO ±1mm ±1.5mm - - HTL,TTL SSI, B, CO housing draw wire 0.105mm (9.52 ulses/mm) 0.038mm incremental/absolute encoder C aluminium coated polyamid stainless steel (ø 1.0mm) slot nuts Wire acceleration 5g 6g 3g 3g Wire retraction force (min) 4N 8N 8N 8N Wire extension force (max) 16N 24N 21N 25N rotection class Vibration Mechanical shock Electrical connection HTL/ TTL SSI B/ CO eyelet I 65 (only if connected) 20g, 20Hz - 2kHz 50g, 10ms integrated cable, radial, 1m long flange connector, radial,12-pin bus cover Weight appr. 2kg appr. 2.5kg appr. 3.5kg appr. 4.5kg FSO = Full Scale Output Specifications for digital outputs on page 48. rticle description WDS CR - TTL Model 115 Measuring range in mm Output options: HTL TTL CO: CNopen B: rofibus D SSI Connection: SR (Output SSI): radial plug CR (Output HTL, TTL): integrated cable, radial, 1m BH (Output CO, B): bus cover
38 38 Draw-wire sensors wiresensor 200 digital - Robust aluminium profile housing - Customized versionsf or OEM - Incremental/absolute encoder Model 200 MR (mm) (mm) B (mm) B ø ø30 4x screw M4x6 3x ø4.3 ø58 ø ø Output 200-HTL/TTL 67 Output 200-SSI 83 Output 200-CO/B 115 ø58 ø58 ø58
39 39 Model WDS WDS WDS Measuring range 30000mm 40000mm 50000mm Output HTL/ TTL/ SSI/ B/ CO Travel per encoder revolution 500mm Linearity ± 0.01% FSO 3mm 4mm 5mm Resolution Temperature range Sensor element Material Wire mounting Sensor mounting Wire acceleration HTL, TTL SSI, B, CO housing draw wire 0.167mm (6 pulses/mm) 0.061mm C incremental/absolute encoder aluminium coated polyamid stainless steel (ø 0.8mm) eyelet slot nuts Wire retraction force (min) 12N 11N 11N Wire extension force (max) 22N 22N 24N rotection class I 65 Electrical connection HTL, TTL SSI B/ CO 2g integrated cable, radial, 1m long flange connector, radial, 12-pin bus cover Weight appr. 10kg appr. 11kg appr. 12kg FSO = Full Scale Output Specifications for digital outputs on page 48. rticle description WDS CR - TTL Model 200 Measuring range in mm Output options: HTL TTL CO: CNopen B: rofibus D SSI Connection: SR (Output SSI): radial plug CR (Output HTL, TTL): integrated cable, radial, 1m BH (Output CO, B): bus cover
40 40 Draw-wire sensor mechanics luminium - Use almost any encoder - Robust aluminium profile housing - High quality sensor components Rugged draw-wire mechanics forencoder mounting The wiresensor mechanics of the Z60, 96, 115 and 200 series are designed for easy mounting of an incremental or absolute encoder. The selection of the interface, resolution and type of connection can therefore be individually configured. Optimum matching to the signal conditioning system is ensured. High precision components and a rugged housing offer high operational reliability and a long life time even under harsh industrial conditions. complete measurement unit always consists of the basic draw-wire mechanism and the adapter for the customer-specific encoder. The adapter contains all the necessary mounting accessories for fitting the encoder and is included in delivery of the 96, 115 and 200 series. take up spool (mechanics) adapter customer-specific encoder For the customer-specific encoder or potentionmeter various draw-wire mechanics are available with measuring range up to 50m.
41 41 Model WDS Z60-M WDS M WDS M WDS M WDS M WDS M WDS M WDS M WDS M Measuring range 1500mm 3000mm 5000mm 7500mm 10000mm 15000mm 30000mm 40000mm 50000mm Output Linearity Resolution dependent upon encoder ±0.01% FSO mm 1.5mm 3mm 4mm 5mm ±0.02% FSO 0.3mm 0.6mm 1mm 1.5mm dependent upon encoder Travel per encoder revolution 150mm mm mm 500mm Suitable encoderadapter-flange Temperature range Material operation storage housing wire WDS-EC 1 WDS-ES 1 not available for clamping flange included in delivery for synchro flange C C aluminium coated polyamid stainless steel ø 0.45mm ø 0.8mm ø 1.0mm 0.8mm Wire mounting wire clip thread M4 eyelet Sensor mounting 2 mounting holes slot nuts Wire acceleration 10g 7g 5g 6g 3g 3g Wire retraction force (min) 3.5N 5N 4N 8N 8N 8N 12N 11N 11N Wire extension force (max) 5.5N 10N 16N 24N 21N 25N 22N 22N 24N rotection class Vibration Mechanical shock dependent upon encoder 20g, 20Hz...2 khz 50g, 10ms Weight 0.3kg 1.1kg 1.4kg 1.9kg 2.8kg 3.2kg 9.5kg 10kg 11kg FSO = Full Scale Output Specifications for digital outputs on page 44. rticle description WDS M - SO Wire brush (only 115/200) Mechanics Model Z60/96/115/200 Measuring range in mm
42 42 Draw-wire sensor mechanics luminium Model Z ø 58 ø for encoder with synchro flange 68.5 with clamping flange x ø Model 96 2x screw nut M4 SW7 10 2x set screw M4 ø13 2x slot nuts ø58 ø50 ø35 ø6h MR (mm) (mm) x M
43 43 Model 115 ø50 MR (mm) (mm) B (mm) ø30 ø20.2 3x ø x screw M4x6 DIN 912 4x fan-shaped washer DIN x slot nuts 2x set screw M4 4x mounting holes M6 ca Ø58 60 LK Ø42± B Model 200 MR (mm) (mm) B (mm) B ø ø30 4 x M x ø4.3 ø58 ø ø42
44 44 Draw-wire sensor mechanics lastic housing - Use almost any encoder - Robust plastic housing - High quality sensor components 22.2 (38.2) 1 ø8 3x ø 4.2 mounting holes DO NOT OEN THE SCREWS approx x ø ø 58 ø 58 +0,05 0 ø 6 H7 +0,012 0 M ø 42 ±
45 45 Model WS-2300-MK88-M WS-5000-MK88-M Measuring range 2300mm 5000mm Output dependent upon encoder Linearity ±0.1% FSO (±2.3mm) ±0.4% FSO (±20mm) Resolution dependent upon encoder Travel per encoder revolution 238.8mm ±0.3mm 240.0mm ±0.6mm Repeatability ±1mm ±2mm Temperature range operation storage C C housing 6 GF 30 Material Wire mounting Sensor mounting Wire acceleration Wire retraction force (min) Wire extension force (max) Vibration Wire extension force (max) Suitable encoder FSO = Full Scale Output draw wire coated polyamid stainless steel ø0.45mm wire clip mounting holes 5 g 3 N 9 N 20 g, 20 Hz...2 khz 50 g, 10 ms synchro flange ø58 mm; shaft ø6 mm rticle description WDS MK88 - M Model MK88 Measuring range in mm Mechanics Sensitivity characteristics MK88 Dimensions in mm The WS-2300-MK88-M is designed with only one wire layer which is wound onto the drum. This sensor design achieves the highest measurement accuracy. Sensitivity (displacement/rotation) [mm] 2. layer 1. layer MR 5000 If a reduced measurement accuracy is sufficient, larger measurement ranges can be MR 2300 achieved with the same sensor dimensions. This can be seen by means of a sensitivity characteristics (see diagram) ±0.5 Step to 2. layer ± ±300 0 Extension [mm] re-extension length Highest measurement accuracy Extension length max.
46 46 wiresensor ccessories and mounting WE-x-M4, WE-x-Clip Wire extension x=length pplication example with accessories TR1-WDS ulley wheel, adjustable TR3-WDS ulley wheel, fixed GK1-WDS MH1-WDS MH2-WDS ttachment head for M4 Magnetic holder for wire mounting Magnetic holder for sensor mounting MT-60-WDS mounting clips MH1-WDS magnetic holder measuring range MT-60-WDS Mounting clamp for WDS-60 FC8 Female connector for WDS, 8-pin FC8/90 Female connector 90 for WDS WE-x-Clip wire extension C 3/8 Sensor cable, lenght 3 m S 2010 ower supply (chassis mounting 35 x 7.5 mm); input 120/230 VC; output 24 VDC/2.5 ; L/B/H 120 x 20 x 40 mm TR3-WDS pulley wheel, fix WDS-M60 Mounting plate for 60 sensors TR1-WDS pulley wheel, adjustable, x Ø4.5 2x Ø5.3 Mounting plate WDS-M60 Installation information: Wire attachment: The free return of the measurement wire is not permissible and it is essential that this is avoided during installation. Wire exit angle: When mounting a draw-wire displacement sensor, a straight wire exit (±3 tolerance) must be taken into account. If this tolerance is exceeded, increased material wear on the wire and at the wire aperture must be expected. wire aperture 0 (±3 tolerance)
47 Output specifications analog 47 input + ground signal = white 2 = brown 3 = green 100 % 0 % R1K otentiometric output () Supply voltage max. 32VDC at 1kOhm / 1 Wmax Resistance 1kOhm ±10% (potentiometer) Temperature coefficient ±0.0025% FSO/ C Sensitivity depends on measuring range individually shown on test report Voltage output (U) Supply voltage VDC (non stabilized) supply ground signal ground zero gain U 0-10 Vdc Current consumption Output voltage Load impendance Signal noise Temperature coefficient Electromagnetic compatibiity (EMC) 30m max VDC Option / ±5V >5kOhm 0.5mV eff ±0.005% FSO/ C EN EN djustment ranges Zero ±20 %FSO Sensitivity ±20 % supply ground zero I 4-20 m gain Supply voltage Current consumption Output current Load Signal noise Temperature coefficient Electromagnetic compatibility (EMC) Current Output (I) VDC (non stabilized) 35m max m <600Ohm <1.6µ eff ±0.01% FSO/ C EN EN djustment ranges Zero ±18% FSO Sensitivity ±15%
48 48 Output specifications SSI Contact description 1 UB Encoder power supply connection. 2 GND Encoder ground connection. The voltage drawn to GND is UB. 3 ulses + ositive SSI pulse input. ulse + forms a current loop with pulse -. current of approx. 7 m in direction of pulse + input generates a logical 1 in positive logic. 4 Data + ositive, serial data output of the differential line driver. High level at the output corresponds to logical 1 in positive logic. 5 ZERO Zero setting input for setting a zero point at any desired point within the entire resolution. The zeroing process is triggered by a High pulse (pulse duration 100 ms) and must take place after the rotating direction selection (U/DOWN). For maximum interference immunity, the input must be connected to GND after zeroing. 6 Data - Negative, serial data output of the differential line driver. High level at the output corresponds to logical 0 in positive logic. nschlussbelegung in Cable color ssignment 1 brown UB 2 black GND 3 blue ulses + 4 beige Data + 5 green ZERO 6 yellow Data - 7 violet ulses - 8 brown/yellow DTVLID 9 pink U/ DOWN 10 black/yellow DTVLID MT lease use leads twisted in pairs for extension cables. 7 ulses - Negative SSI pulse input. ulse - forms a current loop with pulse +. current of approx. 7 m in direction of pulse - input generates a logical 0 in positive logic. 8 / 10 Diagnosis outputs DV and DV MT Jumps in data DTVLID word, e.g. due to defective LED or photoreceiver, are DTVLID MT displayed via the DV output. In addition, the power supply of the multiturn sensor unit is monitored and the DV MT output is set when a specified voltage level is dropped below. Both outputs are Low-active, i.e. are switched through to GND in the case of an error. Inputs Control signals U/DOWN and Zero Level High > 0.7UB Level Low < 0.3UB Connection: U/DOWN input with 10kohms to UB, zeroing input with 10kohms to GND. SSI pulse Optocoupler inputs for electrical isolation 9 U/DOWN U/DOWN counting direction input. When not connected, this input is on High. U/ DOWN-High means increasing output data with a clockwise shaft rotating direction when looking at the flange. U/ DOWN-Low means increasing values with a counter-clockwise shaft rotating direction when looking at the flange. 11 / 12 Not in use Outputs SSI data RS485 driver Diagnostic outputs ush-pull outputs are short-circuit-proof Level High > UB -3.5V (with I = -20m) Level Low 0.5V (with I = 20m)
49 Output specifications CNopen 49 CNopen features Bus protocol CNopen 1 ON Device profile CNopen - Ci DS 406, V 3.0 CNopen Features Operating modes (with SDO progr.) reset value Rotating direction Scaling: Diagnose Device Class 2, CN 2.0B olling Mode (asynch, via SDO) Cyclic Mode (asynch-cyclic) The encoder cyclically sends the current process actual value without a request by a master. The cycle time can be parameterized for values between 1 and ms. Synch Mode (synch-cyclic) The encoder sends the current actual process value after receiving a synch telegram sent by a master. The synch counter in the encoder can be parameterized so that the position value is not sent until after a defined number of synch telegrams. cyclic Mode (synch-acyclic) With the reset parameter the encoder can be set to a desired actual process value that corresponds to the defined axis position of the system. The offset value between the encoder zero point and the mechanical zero point of the system is saved in the encoder. With the operating parameter the rotating direction in which the output code is to increase or decrease can be parameterized. Scaling The steps per revolution and the total revolution can be parameterized. The steps per revolution and the total revolution can be parameterized. The encoder supports the following error messages: - osition and parameter error - Lithium cell voltage at lower limit (Multiturn) CN_L CN_H UB GND ON CN_L CN_H Setting CNopen baud rate UB Contact description CNopen CN_L CN_H UB GND GND Setting of terminating Resistor for CNopen ON 1 ON = Last user OFF = User X Baud rate Setting Dip Switch kBit/s OFF OFF OFF 20kBit/s OFF OFF ON 50kBit/s OFF ON OFF 125kBit/s OFF ON ON 250kBit/s ON OFF OFF 500kBit/s ON OFF ON 800kBit/s ON ON OFF 1MBit/s ON ON ON CN Bus Signal (dominant Low) CN Bus Signal (dominant High) Versorgungsspannung VDC Ground contact for UB (Terminals with the same designation are internally interconnected) Default setting 50kbit/s, node number 1 Settings of user address for CNopen ddress can be set with rotary switch. Example: User address 23
50 50 Output specifications rofibus rofibus-d features Bus protocol rofibus-d 1 ON 2 rofibus features Device Class 1 and 2 Data exch. functions Input: osition value dditional parameterized speed signal (readout of the current rotary speed) Output: reset value B UB GND B UB GND Settings of terminating resistors for rofibus-d reset value With the reset parameter the encoder can be set to a desired actual value that corresponds to the defined axis position of the system. ON 1 2 arameter functions Rotating direction: With the operating parameter the rotating direction for which the output code is to increase or decrease can be parameterized. ON = last user OFF = user X Diagnose The encoder supports the following error messages: - osition error - Lithium cell voltage at lower limit (Multiturn) Default setting User address 00 Settings of user address for rofibus-d ddress can be set with rotary switch. Example: User address 23 Contact description rofibus-d negative serial data line B ositive serial data line UB Supply voltage VDC GND Ground contact for UB (Terminals with the same designation are internally interconnected)
51 Output specifications Incremental encoder 51 Signal output in assignment TTL, HTL in Cable color ssignment 1 pink B inv. B B blue UB Sense 3 red N (Nullimpulses) 4 black N inv. (Nullimpulses inv.) 5 brown 6 green inv grey B white/green GND 11 white GND Sense 12 brown/green UB Output TTL Linedriver (5VDC) Level High 2.5V (with I = -20m) Level Low 0.5V (with I = 20m) Load High 20m Output,, B, B, O in 2 and in 12 are internally connected as well as in 11 and 10. For cable length >10m twisted pair wires are required. Output HTL ush-pull ( VDC) Level High UB -3V (with I = -20m) Level Low 1.5V (with I = 20m) Load High 40m Output,, B, B, O Output E ush-pull (5VDC) Level High UB -2.5V Level Low 0.5V Load High 50m Output, B, O Output E830 ush-pull ( VDC) Connection assignment E, E830 in Cable color ssignment - white 0V - brown +UB - green yellow B - - B - grey 0 Level High UB -3V Level Low 2.5V Load High 50m Output, B, O
52 High performance sensors made by Micro-Epsilon Sensors and systems for displacement and position Sensors and measurement devices for non-contact temperature measurement 2D/3D profile sensors (laser scanner) Measurement and inspection systems for quality assurance Optical micrometers, fibre optic sensors and fibre optics Colour recognition sensors, LED analyzers and colour online spectrometer Modifications reserved / Y F051113GKE MICRO-ESILON Headquarters Koenigbacher Str Ortenburg / Germany Tel. +49 (0) 8542 / Fax +49 (0) 8542 / info@micro-epsilon.com Micro-Epsilon UK Ltd. No.1 Shorelines Building Shore Road Birkenhead CH41 1U hone +44 (0) Fax +44 (0) info@micro-epsilon.co.uk Länna, S SKOGÅS Ordertel Växel info@hemomatik.se Orderfax Teknisk Internet
More Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 42 Long distance draw-wire sensors wiresensor P200 digital - Robust aluminium profile housing - Customized versions for OEM - Incremental/absolute
More informationMore Precision. Draw-wire displacement sensors
More Precision wiresensor Draw-wire displacement sensors 4 Draw-wire sensors wiresensor MK77 analog - Robust plastic housing - Customized versions for OEM - Wire potentiometer Model MK77 Output P 34. ø8
More informationMore Precision. Draw-wire displacement sensors
More recision. wiresensor Draw-wire displacement sensors 2 Draw-wire displacement and position sensors - Measuring ranges to 50,000mm - Resolution quasi infinite - Compact overall design - Easy mounting
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More recision wiresensor // Draw-wire displacement sensors 2 Draw-wire displacement and position sensors wiresensor - Measuring ranges to 50,000mm - Resolution quasi infinite - Compact overall design -
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 30 Industrial draw-wire sensors wiresensor P60 analog - Robust aluminum profile housing - Customized versions for OEM - Potentiometer, current
More informationMore Precision. Draw-wire displacement sensors
More Precision wiresensor Draw-wire displacement sensors 0 Draw-wire sensors wiresensor MK analog - Robust plastic housing - Customized versions for OEM - Wire/hybrid potentiometer Model MK Output P0/P5
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More recision wiresensor // Draw-wire displacement sensors 2 Draw-wire displacement and position sensors wiresensor - Measuring ranges to 50,000mm - Resolution quasi infinite - Compact overall design -
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 4 Low-cost draw-wire displacement sensors wiresensor MK77 analog - Robust plastic housing - Customized versions for OEM - Wire potentiometer
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 8 Low-cost draw-wire displacement sensors wiresensor MK60 analog - Robust plastic housing - Customized versions for OEM - Potentiometer, current
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors Low-cost draw-wire displacement sensors wiresensor MK30 analog - Robust plastic housing - Customized versions for OEM - Conductive plastic/wire/
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors Low-cost draw-wire displacement sensors wiresensor MK30 analog - Robust plastic housing - Customized versions for OEM - Conductive plastic/wire/
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 8 Low-cost draw-wire displacement sensors wiresensor MK60 analog - Robust plastic housing - Customised versions for OEM - Potentiometer, current
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 38 Industrial draw-wire sensors wiresensor P5 analogue - Robust aluminium profile housing - Customised versions for OEM - Potentiometer, current
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 0 Low-cost draw-wire displacement sensors wiresensor MK4 analog - Robust plastic housing - Customized versions for OEM - Wire/hybrid potentiometer
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 0 Low-cost draw-wire displacement sensors wiresensor MK analog - Robust plastic housing - Customized versions for OEM - Wire/hybrid potentiometer
More informationDraw wire sensors, draw wire sensors for displacement, position
Draw wire sensors, draw wire sensors for displacement, position Sensors based on potentiometer and encoder, for industrial and OEM applications for measurement of lengths, stroke, displacement, position,
More informationDraw wire sensors, draw wire sensors for displacement, position
Draw wire sensors, draw wire sensors for displacement, position Sensors based on potentiometer and encoder, for industrial and OEM applications for measurement of lengths, stroke, displacement, position,
More informationMore Precision. Draw wire sensors / CET / String pots
More Precision. Draw wire sensors / CET / String pots 02 Draw-wire displacement and position sensors Measuring ranges to 50,000 mm Resolution quasi infinite Compact overall design Easy mounting for any
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 22 Low-cost draw-wire displacement sensors wiresensor MK88 analog - Robust plastic housing - Customized versions for OEM - Potentiometer, current
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 24 Low-cost draw-wire displacement sensors wiresensor MK analog - Robust plastic housing - Customized versions for OEM - Potentiometer, current
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 28 Robust miniature sensors wiresensor MP / MPW analog - Miniature design - Optional IP 67 (MPW) - For fast measurement and harsh environments
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 44 Draw-wire aluminum sensor mechanics wiresensor - Use almost any encoder - Robust aluminum profile housing - High quality sensor components
More informationDraw wire sensors, draw wire sensors for displacement, position
Draw wire sensors, draw wire sensors for displacement, position Sensors based on potentiometer and encoder, for industrial and OEM applications for measurement of lengths, stroke, displacement, position,
More informationMore Precision. Draw wire sensors / CET / String pots
More Precision. wiresensor Draw wire sensors / CET / String pots 14 wiresensor nalog series / Best seller - most economic model Very robust sensor housing Easy and flexible mounting Universal analog sensors
More informationAbsolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
More informationMore Precision. eddyncdt // Eddy current sensors for displacement and position
More Precision eddyncdt // Eddy current sensors for displacement and position 26 Turbocharger speed measurement turbospeed DZ140 - Maximum speed range from 200 to 400,000 RPM - Miniature sensor design
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485
Optical multiturn encoders 1 bit ST / 12 bit MT, RS485 Features Encoder multiturn / RS485 Optical sensing method Resolution: singleturn 1 bit, multiturn 12 bit Clamping or synchro flange Fieldbus protocol
More informationMore Precision. optoncdt // Laser Triangulation Displacement Sensors
More Precision optoncdt // Laser Triangulation Displacement Sensors 8 Low cost sensors with analogue outputs optoncdt 1302 312Hz 375Hz 1000Hz Analog Digital Trigger TeachIn Four models with measuring ranges
More informationIncremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
More informationAbsolute encoders - bus interfaces Encoder kit Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Features single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
More informationIncremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
More informationMore Precision. optoncdt // Laser Triangulation Displacement Sensors
More Precision optoncdt // Laser Triangulation Displacement Sensors 20 Sensor with laserline for shiny metallic and rough surfaces optoncdt 1700LL 312Hz 375Hz 1000Hz Analog Digital Filter inside Laser
More informationAbsolute encoders - bus interfaces Solid shaft with synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
EAM60 - solid shaft CANopen - MAGRES Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up to IP 67 High
More informationSERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
More informationNOVOTURN Multiturn-Sensor non-contacting. Series RSM2800 digital SSI, SPI
NOVOTURN Multiturn-Sensor non-contacting Series RSM2800 digital SSI, SPI Special features True Power On System: counts turns even when not powered. Patented non-volatile technology does not require gears
More informationTECHNICAL DATASHEET Heavy Duty - Absolute Encoder AR 62/63
AR 6 Single and Multi turn: Resolution up to 8 Bit Wearless electronic multi turn: contact -and battery less, self-energetic 300 N axial and radial load 00 g shock resistance/ 0 g vibration resistance
More informationAMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen
More informationMore Precision. optoncdt // Laser Triangulation Displacement Sensors
More Precision optoncdt // Laser Triangulation Displacement Sensors 24 Short measurement ranges at long stand off distances optoncdt 1710-50 High accuracy and long standoff distances Measurement rate up
More informationMore Precision. scancontrol // 2D/3D laser scanner (laser profile sensors)
More Precision scancontrol // 2D/D laser scanner (laser profile sensors) 12 Technical details and versions scancontrol 26x/29x - z-axis measuring up to 265mm - x-axis measuring up to 14.5mm - Profile frequency
More informationMore Precision. indusensor // Linear inductive displacement sensors
More Precision indusensor // Linear inductive displacement sensors 12 Long-stroke sensors for hydraulics & pneumatics indusensor EDS - Measuring ranges from 75... 630 mm - Linearity: ± 0.3 % FSO - Integrated
More informationMore Precision. 2D/3D laser scanner (laser profile sensors)
More Precision. scancontrol 2D/3D laser scanner (laser profile sensors) 4 Technical details Extremely compact design The design of the scancontrol 29x series is focussed on minimal size and low weight.
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
More informationMultiturn absolute encoder
Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Galvanically isolated CAN interface DSP 406, CLASS 1 and 2 Servo or clamping flange 2 limit switches Description In addition to
More informationMore Precision. capancdt 61x0/IP // Capacitive measuring system for industrial applications
More Precision capancdt 61x0/IP // Capacitive measuring system for industrial applications 2 Capacitive measuring system for industrial applications capancdt 61x0/IP Compact and robust controller 8m IP68
More informationHMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn / SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit Blind or through hollow shaft or cone shaft ø16-0 mm Multiturn sensing
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides
More informationMore Precision. scancontrol // 2D/3D laser scanner (laser profile sensors)
More Precision scanontrol // 2D/3D laser scanner (laser profile sensors) scanontrol 27x gapontrol 27x1 Technical details and versions - z-axis up to 3mm - x-axis up to 148mm - Profile frequency up to 4,Hz
More informationMore Precision. optoncdt // Laser displacement sensors (triangulation)
More Precision optoncdt // Laser displacement sensors (triangulation) 10 Smart laser triangulation displacement sensor optoncdt 1420 312Hz 375Hz 1000Hz Ideal for serial and OEM applications Compact design
More informationDelivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
More informationPRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL
EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationMore Precision. eddyncdt // Eddy current sensors for displacement and position
More Precision eddyncdt // Eddy current sensors for displacement and position 18 High precision eddy current displacement measurement eddyncdt 00 - Micrometer accuracy - Ideal for fast measurements: Bandwidth
More informationLaser Triangulation Displacement Sensors
Laser Triangulation Displacement Sensors 30 The high speed true analogue laser sensor optoncdt 1610 / 1630 16 models with measuring ranges from 0.5mm to 200mm Sensor head and separate controller Up to
More informationAbsolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
More informationBus Cover Description for Shaft Encoder
Bus Cover Description for Shaft Encoder Profibus-DP features Profibus-DP Profibus features Device Class and Data exch. functions Input: Position value Additional parameterized speed signal (readout of
More informationMore Precision. scancontrol BL // 2D/3D blue laser scanner
More Precision scancontrol BL // 2D/3D blue laser scanner 2 Laser scanner for precise profile measurement and evaluation scancontrol BL Index Measuring principle 3 Technical details 4 Applications 5 scancontrol
More informationSpeed switches Programmable, digital speed switch With incremental encoder HOG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) Combination with end shaft ø16 mm DSL.R: 3 outputs speed
More informationMore Precision. optoncdt // Laser displacement sensors (triangulation)
More Precision optoncdt // Laser displacement sensors (triangulation) 1 High Speed PSD Sensors optoncdt 1610 / 1630 INTER FACE Nine models with measuring ranges from mm to 100 mm Sensor head and separate
More informationDATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
More informationbidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental
and draw-wire sensors Spot-on and trailblazing technology measure rotation speed, sense, position, angle and length. For this purpose, they convert mechanical motion in electrical signals. There are incremental
More informationSpeed switches Programmable, digital speed switch With incremental encoder POG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) EURO-flange B10 / shaft ø11 mm DSL.R: 3 outputs speed
More informationRoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via
More informationEAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationDLS SERIES DRAW WIRE LINEAR SENSORS. Innovation In Motion
DLS SERIES DRAW WIRE LINEAR SENSORS Innovation In Motion INNOVATION IN MOTION The DLS series of draw-wire linear position sensors are a cost effective way to measure linear displacements up to 5000mm in
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Highly shock / vibration and soiling resistant Sturdy construction
More informationDATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
More informationThe pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document.
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document. Rotary Encoder Solutions Limited Dutton Road Redwither Business
More informationEncoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
More informationDATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER CANOPEN
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
More informationSense it! Connect it! Bus it! Solve it! ENCODERS
Sense it! Connect it! Bus it! Solve it! ENCODERS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
More informationAbsolute Encoders Multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
More informationMHAD 50 - HDmag. Features
MHAD 50 with cable Features Absolute encoder with magnetic sensing and without bearings Absolute resolution max. 16 bit singleturn Additional incremental signals Robust and wearless Protection IP 67 Large
More informationAbsolute Shaft Encoders ACURO industry
bsolute Shaft Encoders CURO industry Type C 58 Synchro flange Compact design: 5mm length for single or multiturn ids for start up and operation: diagnostic LED, preset key with optical response, status
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft 0 Bit multiturn Free of wear magnetic sampling High resolution and accuracy Mechanical compatibility with all major encoders with fieldbus interface Status LEDs Description
More informationENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
More informationLinear Measurement Technology Draw Wire Mechanics with Encoder or Analog Sensor
High IP protection rating Wide temperature range Shock/vibration resistant Reverse polarity protection Robust Corrosion resistant: Titanium-anodized aluminium housing. High-strength stainless steel draw
More informationAbsolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
More informationNOVOTURN Multiturn Sensor non-contacting Series RSM2800 analog
NOVOTURN Multiturn Sensor non-contacting Series RSM2800 analog Special features non-contacting, magnetic long life electr. angle 720 up to 5760 in 360 -steps available (equates 2... 16 turns) continuous
More informationInclination sensors 1-dimensional, measuring range
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More informationProtection class. ±0.35% f.s., other values on request. Protection class IP50
WS31C Compact OEM sensor for large order volumes Protection class IP50 Economical design Compact outline Measurement range 0... 250 mm to 0... 750 mm Mounting optional with mounting brackets or spacer
More informationRotary Measuring Technology
Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life
More informationMHAP HDmag. Features
Features MHP 200 - Version for axial screw mounting bsolute encoder with magnetic sensing and without bearings with integrated FPG signal processing bsolute resolution max. 17 bit singleturn dditional
More informationMore Precision. optoncdt // Laser displacement sensors (triangulation)
More Precision optoncdt // Laser displacement sensors (triangulation) 34 High Precision Blue Laser Sensor for Reflective Objects optoncdt 2300-2DR 312Hz 375Hz 1000Hz INTER FACE Blue Laser Technology (Blue
More informationInclination sensors 2-dimensional, measuring range up to ±90
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationMore Precision. optoncdt // Laser displacement sensors (triangulation)
More Precision optoncdt // Laser displacement sensors (triangulation) 28 Universal sensor with a range of 1000 millimeters optoncdt 1710-1000 312Hz 375Hz 1000Hz High accuracy and long standoff distances
More informationNOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
More informationTechnical data. General specifications. Functional safety related parameters B 10d Electrical specifications Operating voltage U B
Model Number Cable pull rotary encoder with PROFI- NET interface Features Robust aluminum drum housing Drum travel when cable retracted using threaded spindle Bellows with steel tip Comprehensive accessories
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - CANlayer2
Diagnostic LED Poll and auto mode Programmable: Direction, limit values Option: Display "tico" Clamping flange TECHNICAL DATA mechanical Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft)
More informationLaser Triangulation Displacement Sensors
Laser Triangulation Displacement Sensors optoncdt 1700 Intelligent sensor with integrated controller for industrial applications 14 Eleven models with measuring ranges from 2mm to 1000mm Compact design
More informationMAGNETOSTRICTIVE TRANSDUCER
MGNETOSTRICTIVE TRNSDUCER MB Series Content: Technical Data...2 Technical Drawing...3 Electrical Connection & ccessories...4 Order Code...5 Options & ccessories...6 Key-Features: - vailable measurement
More informationRotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track
Electronic multiturn gear with intelligent sensing technology (IST) Integrative Technology Max. 4 programmable outputs* for the SSI version Programmable parameters include*: code type, resolution per revolution,
More informationRotary Measuring Technology Absolute encoders, Multiturn, DeviceNet
High IP High shaft load capacity Shock/vibration resistant Short-circuit proof Reverse polarity protection Compact and Rugged: Minimal installation depth High shock and vibration values Very compact (only
More informationMultiturn absolute encoder
Release date: 207-0-2 :0 Date of issue: 207-0-2 t79_eng.xml Model Number Features Industrial standard housing Ø58 mm PROFINET IRT 0 Bit multiturn Servo or clamping flange Network loop through by means
More informationThe pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document.
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document. Rotary Encoder Solutions Limited Dutton Road Redwither Business
More informationMaterial: Weight: Shaft Loads: Cable: Connector:
Absolute Encoder Type 2RMHF-SSI Absolute Encoder - Ø 24 mm Blind Hollow Shaft - Ø 3 mm to Ø 1/4 inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting
More informationENCODER. CANopen Multiturn. Series , Key-Features:
ENCOER CANopen Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Solid Shaft... Order Code Blind Hollow Shaft... Technical ata... CANopen Interface...5 Connection...6 Technical drawing...7
More informationMore Precision. optoncdt // Laser displacement sensors (triangulation)
More Precision optoncdt // Laser displacement sensors (triangulation) 24 Long-range sensors for large distances optoncdt 1710-50 312Hz 375Hz 1000Hz High accuracy and long standoff distances Adjustable
More information