OrCAD Oriented Pre-Simulation. Addi Lin
|
|
- Marian Quinn
- 6 years ago
- Views:
Transcription
1 OrCAD Oriented Pre-Simulation Addi Lin 4/Jul/2014
2 Simplify The Complexity of Product Design Function Verification - OrCAD PSpice
3 Topic Design Challenges Production Challenges How to help developing new design faster and more stable Mechatronics integration Design Modularized simulation How to help your customer to get more powerful support
4 Design Challenges Step 1 : Make circuit design on your system Does it work? Is it stable? Step 2 : Make a Prototype in Laboratory Prepare equipment Connect system in between Does it work? Is it stable?
5 Traditional Design Flow Schematic drawing in your design Make prototype Measurement in Laboratory Repeatedly try and error How long? Cost?
6 A Virtual Laboratory OrCAD PSpice Curve Tracer OrCAD PSpice Statistical Analysis ayss Measurement Expression Function Generator Logical Analyzer ay Oscilloscope Network Analyzer Spectrum Analyzer Power Supply
7 Virtual Design Flow Schematic drawing Simulate and results confirmation PCB layout Manufacture
8 A Quality Analysis Laboratory Mass Production Issues Complexity Stability Components Specification Cost
9 Mass Production Challenges Prototype It works It is stable How about Mass Production? Parts specification? Tolerance Temperature issue Is it stable?
10 Enhance Circuit Design Stability Is simple best? Using Parts with high accuracy and stable specification to improve stability. Enhance stability with compensate circuit design. Using other structure design.
11 Design Flow for Mass Production Get a standard system design from origin Measure and find out better structure Include tolerance and temperature parameters Parametric Sweep Worst Case Analysis Monte Carlo Analysis ( Yield )
12 Parametric Sweep Make sure structure and parts are good for design.
13 Worst Case Analysis Effects of Components Tolerance Limitation on Worstp Case Analysis
14 Monte Carlo Analysis
15 Mechatronics Integration Design Automotive Safety System Passive mode:abs Airbag Reversing radar Active mode:dstc, ROPS, EBD, CWFAB, PDFAB, DAC, LDW
16 SLPS Option Modeling of electric circuit using PSpice MATLAB
17 Multi-System Co-Simulation
18 Modularized Design and Simulation
19 Modularized Design and Simulation OrCAD PSpice Simulation
20 Virtual Laboratory PSpice is a Senior Application Engineer Quality Analysis Laboratory Reduce Loading in Product Design Process Cost Down Time to Market
21 OrCAD SI
22 Signal Integrity Flow OrCAD Schematic SI Model Association Analyze / Edit Topology Topology Extraction Netlist to PCB Editor Topology Association Audit / Refine Topology & Constraints
23 OrCAD SI Analysis Features in 16.6
24 Environment Setup DC Net Power Value Assignment
25 Environment Setup SI Model Library Path Setup
26 Environment Setup SI Model Assignment Pull Down Menu RMB Menu
27 Environment Setup Auto Model Assignment for Discrete parts
28 Xnet Generation Solution
29 Extract Topology Extract Signal Net Topology
30 Differential Max uncoupled parallel length Max Static phase
31 Data Byte Lane Topology
32 Data Group Routing Rules
33 Variance Table of Design Requirements
34 Signal Integrity Simulation
35 Define Constraints in OrCAD SigXpolor
36 Update Capture
37 Replicate ECSet Auto create ECSet Auto create ECSet Easy use to other net
38 Netin to OrCAD PCB
39 Import ECSets From Constraint Manager
40 Exploring Signal from OrCAD Capture DSN *.TOP Topology Embedded in DSN file From Processor => DDR A single mouse click makes you ready for SI Analysis
41 OrCAD Capture Apps GraserWARE FrontendPack
42 GraserWARE FrontendPack Replace BUS Alias Import/Export Properties Design Compare Reference Edit
43 Replace BUS Alias Replace Bus alias By Selection By Page By Design
44 Replace BUS Alias
45 Import/Export p Properties Export Design Properties to Excel
46 Import/Export p Properties Import Part Properties from Excel to Design
47 Capture Design Compare Design version1 and version 2 How do you know which part or Net-list is different?? Project Design1 Difference Project Design 2
48 Capture Design Compare Design Compare By Part By Net Both
49 Reference Edit Modify RefDes Insert/Delete/Modify Reference Prefix
50 Reference Edit Annotate RefDes Annotate Reference by page or selection
51 Graser WARE Front-End Pack Roadmap - Part Utility Is the property editor in Schematic always annoying??
52 Graser WARE Front-End Pack Roadmap - Part Utility Getting Part Information from Part Database Check Part Status - EOL Part - DNI Part General BOM File Check Part Status Parts Database
Complete Design Environment 完整的設計環境. Addi Lin
Complete Design Environment 完整的設計環境 Addi Lin 25/Jun/2015 OrCAD PCB Design Flow Overview Library Editor OrCAD Library Builder Design Entry OrCAD Capture CIS Circuit Simulation PSpice A/D Advanced Analysis
More informationGetting started. Starting Capture. To start Capture. This chapter describes how to start OrCAD Capture.
Getting started 1 This chapter describes how to start OrCAD Capture. Starting Capture The OrCAD Release 9 installation process puts Capture in the \PROGRAM FILES\ORCAD\CAPTURE folder, and adds Pspice Student
More informationOrCAD for Education Program
OrCAD for Education Program In partnership with Cadence Design Systems (the world s largest EDA software vendor), ECADtools administers the OrCAD for Education Program, which provides universities, electronics
More informationAllegro Design Entry CIS Constraints
Managing Constraints using Allegro Design Entry CIS with Allegro PCB Editor: Application Note Product Version 16.0 March 2007 Contents Overview Acronyms Scope The Allegro Properties Filter Class rules
More informationPSpice Simulation Using isppac SPICE Models and PAC-Designer
PSpice Simulation Using isppac SPICE Models Introduction PAC-Designer software, a Windows-based design tool from Lattice Semiconductor gives users the capability to graphically design analog filters and
More informationCadence simulation technology for PCB design
DATASHEET CADENCE SIMULATION FOR PCB DESIGN On larger designs especially, PCB design teams need fast and reliable simulation to achieve convergence. Cadence simulation technology for PCB design offers
More informationWhat s New OrCAD 16.6 Quarterly Incremental Release #7
What s New OrCAD 16.6 Quarterly Incremental Release #7 Josh Moore Director Product Marketing Cadence OrCAD Solutions Parag Choudhary Product Engineering Cadence OrCAD Solutions Additional Material and
More informationCreating Xnets for Resistor Packs in Allegro PCB Editor. Product Version SPB16.6 April 2, 2014
Creating Xnets for Resistor Packs in Allegro PCB Editor Product Version SPB16.6 April 2, 2014 Copyright Statement 2014 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence and the Cadence
More informationFlowCAD Schweiz AG. Tel Fax STANDARD PROFESSIONAL ALLEGRO. Licensing httpfloating Networked License
Licensing Floating Networked License : 12 Months Maintenance Support Included In Purchase Price SCHEMATIC ENTRY + DATA MANAGEMENT Graphical, flat and hierarchical page editor and Picture block hierarchy
More information2 Creating Xnets and Differential Pairs by Assigning Signal Models
1 Allegro Design Entry HDL - Constraint Manager User Guide Product Version 16.6 October 2012 2 Creating Xnets and Differential Pairs by Assigning Signal Models Design Entry HDL provides support for creating
More informationLesson 2: DC Bias Point Analysis
2 Lesson 2: DC Bias Point Analysis Lesson Objectives After you complete this lesson you will be able to: Create a simulation profile for DC Bias analysis Netlist the design for simulation Run a DC Bias
More informationOrCad & Spice Tutorial By, Ronak Gandhi Syracuse University
OrCad & Spice Tutorial By, Ronak Gandhi Syracuse University Brief overview: OrCad is a suite of tools from Cadence for the design and layout of circuit design and PCB design. We are currently using version
More informationFlowCAD Schweiz AG. Tel. +41 (0) Fax +41 (0) OrCAD Professional. Allegro Designer. OrCAD Standard
Licensing Floating Networked License 12 Months Maintenance Support Included In Purchase Price SCHEMATIC ENTRY + DATA MANAGEMENT Graphical, flat and hierarchical page editor and Picture block hierarchy
More informationWhat s New 16.6 QIR Update 3 OrCAD Capture & PSpice
OrCAD Capture & PSpice What s New 16.6 QIR Update 3 OrCAD Capture & PSpice The following are the key list of features released as 16.6 QIR Update 3 Object Alignment Object Distribution Library Refresh
More informationAPPENDIX-A INTRODUCTION TO OrCAD PSPICE
220 APPENDIX-A INTRODUCTION TO OrCAD PSPICE 221 APPENDIX-A INTRODUCTION TO OrCAD PSPICE 1.0 INTRODUCTION Computer aided circuit analysis provides additional information about the circuit performance that
More informationNI Circuit Design Suite
RELEASE NOTES NI Circuit Design Suite Version 10.0 Contents These release notes contain system requirements for NI Circuit Design Suite 10.0, and information about product tiers, new features, documentation
More informationExercise 1. Section 2. Working in Capture
Exercise 1 Section 1. Introduction In this exercise, a simple circuit will be drawn in OrCAD Capture and a netlist file will be generated. Then the netlist file will be read into OrCAD Layout. In Layout,
More informationHFSS Solver On Demand for Package and PCB Characterization Using Cadence. Greg Pitner
HFSS Solver On Demand for Package and PCB Characterization Using Cadence Greg Pitner 1 Problem Statement Usually SI engineers extract only the package or the pcb due to the trade offs between capacity
More informationAltium Designer Functional Areas
Altium Designer Functional Areas Why Data Management The Idea behind Altium Designer Copyright 2013 Altium Limited Functional units of AD JK, v 2.3 2 ONE Tool for each Electronic Design Engineer What exactly
More informationOrCAD & Allegro V Comparaison des produits PCB Designer
& V16.6-2015 Comparaison des produits SCHEMATIC ENTRY + DATA MANAGEMENT Graphical, flat and hierarchical page editor and Picture block hierarchy Capture Market place for Apps, Models, Symbols and more
More informationConfiguration of PSpice Model Libraries. OrCAD PSpice A/D, OrCAD PSpice AA and Allegro AMS Simulator
Title: Product: Summary: Configuration of PSpice Model Libraries OrCAD PSpice A/D, OrCAD PSpice AA and Allegro AMS Simulator This application note describes how you can find PSpice models, how you can
More informationHFSS Solver-On-Demand for Package and PCB Characterization Using Cadence Greg Pitner
HFSS Solver-On-Demand for Package and PCB Characterization Using Cadence Greg Pitner 1 ANSYS, Inc. September 14, Problem Statement Usually SI engineers extract only the package or the pcb due to the trade-offs
More informationAllegro Design Authoring
Create design intent with ease for simple to complex designs Systems companies looking to create new products at the lowest possible cost need a way to author their designs with ease in a shorter, more
More informationLesson 19: Processing a Hierarchical Design
Lesson 19: Processing a Hierarchical Design Lesson Objectives After you complete this lesson you will be able to: Annotate a hierarchical design Perform a Design Rule Check on a hierarchical design Correct
More informationLesson 13: Other Tools in OrCAD Capture
Lesson 13: Other Tools in OrCAD Capture Lesson Objectives After you complete this lesson you will be able to: Add inter-sheet signal references Create a cross reference report (Optional) Generate a Bill
More information6 Using Constraint Manager with Other Tools Across the Allegro Platform
1 Allegro Constraint Manager User Guide 6 Using Constraint Manager with Other Tools Across the Allegro Platform Topics in this chapter include Phases in the Design Flow Design Exploration Phase (with SigXplorer)
More informationLesson 1: Getting Started with OrCAD Capture
1 Lesson 1: Getting Started with OrCAD Capture Lesson Objectives Discuss design flow using OrCAD Capture Learn how to start OrCAD Capture The OrCAD Capture Start Page Open an existing Project Explore the
More informationOrCAD PCB Editor Menu comparison
A Parallel Systems Technical Note OrCAD PCB Editor menu comparison OrCAD PCB Editor Menu comparison Cadence introduced a new easy to use menu in the 16.6-2015 (Hotfix S051) release. This new menu structure
More informationWhat s New in HyperLynx 8.0
What s New in HyperLynx 8.0 Copyright Mentor Graphics Corporation 2009 All Rights Reserved. Mentor Graphics, Board Station XE Flow, ViewDraw, Falcon Framework, IdeaStation, ICX and Tau are registered trademarks
More informationSPICE Models: ROHM Voltage Detector ICs
SPICE Models: ROHM Voltage Detector ICs BD48 G/FVE,BD49 G/FVE,BD52 G/FVE,BD53 G/FVE, No.10006EAY01 1. INTRODUCTION 1.1 SPICE SPICE is a general-purpose circuit-simulation program for nonlinear DC, nonlinear
More informationHow to Simplify PCB Design
How to Simplify PCB Design 1. 2. 3. 4. HOW TO SIMPLIFY AND AUTOMATE YOUR PCB ECO WORKFLOW HOW TO SIMPLIFY ROUTING WITH PIN SWAPPING HOW TO SIMPLIFY OUTPUT GENERATION WORKFLOW HOW TO SIMPLIFY CIRCUIT REPLICATION
More informationFor more details, Please contact: #25, Dr. Radhakrishnan Salai, CADD Centre Building, Mylapore, Chennai
For more details, Please contact: #25, Dr. Radhakrishnan Salai, CADD Centre Building, Mylapore, Chennai - 600 004. LIVEWIRE and LIVEWIRE logo are registered trademarks of CADD Centre Training Services
More informationAnalog Design Tools. Quickly & easily accessible Available online 24/7
Analog Design Tools Quickly & easily accessible Available online 24/7 1Q 2008 TINA-TI www.ti.com/tina-ti TINA-TI Easy-to-use, powerful analog simulation program based on a PSPICE engine. TINA-TI is a fully
More informationLesson 12: Preparing for Post Processing
12 Lesson 12: Preparing for Post Processing Learning Objectives In this lesson you will: Rename reference designators on the board design Backannotate changes made in the OrCAD and Allegro PCB Editor to
More informationSimulation examples Chapter overview
Simulation examples 2 Chapter overview The examples in this chapter provide an introduction to the methods and tools for creating circuit designs, running simulations, and analyzing simulation results.
More informationOrCAD && PSPICE
כלי תוכנה להנדסת חשמל ומחשבים 361-1-1041 OrCAD && PSPICE 361-1-1041 כל י תוכנ ה ל הנד סת חש מל ו מח שבים 2 Introduction OrCAD OrCAD products offer a total solution for core design tasks: schematic- and
More informationHow to Back Annotate in ORCAD after re-sequencing is done in Allegro Layout Baykal Technology, Inc. Emre Uludemir, Founder
Technical Paper #2: How to Back Annotate in ORCAD after re-sequencing is done in Allegro Layout. 2007 Baykal Technology, Inc. Emre Uludemir, Founder Table of Contents: Page Introduction:... 2 Why do we
More informationALLEGRO DESIGN ENTRY HDL 610
DATASHEET ALLEGRO DESIGN ENTRY HDL 610 ROBUST AND HIGHLY INTEGRATED SCHEMATIC DESIGN Cadence Allegro Design Entry HDL 610, a 600 series product within the Allegro system interconnect design platform, offers
More informationLesson 17: Building a Hierarchical Design
Lesson 17: Building a Hierarchical Design Lesson Objectives After you complete this lesson you will be able to: Explore the structure of a hierarchical design Editing the Training Root Schematic Making
More information4 ECSets and Topology Templates
1 Allegro Constraint Manager User Guide 4 ECSets and pology Templates pics in this chapter include "What is a pology Template?" "Importing ECSets" "Mapping Templates and ECSets to Net-related Objects"
More informationOrCAD Lite Products Reference
Version 17.2 Updated on: September 17, 2018 1991 2018 Cadence Design Systems, Inc. All rights reserved. Portions Apache Software Foundation, Sun Microsystems, Free Software Foundation, Inc., Regents of
More informationThe Monte Carlo analysis can vary basic components and models - subcircuit data is not varied during the analysis.
Monte Carlo Analysis Old Content - visit altium.com/documentation Modified by Phil Loughhead on 4-Mar-2014 Description Monte Carlo analysis allows you to perform multiple simulation runs with component
More informationPSpice Analog and mixed signal simulation
PSpice Analog and mixed signal simulation You can count on PSpice for accurate circuit simulation results and regular innovations. PSpice has been tried and proven by thousands of engineers. Since the
More informationGetting Started with Orcad Lite, Release 9.2
Getting Started with Orcad Lite, Release 9.2 Professor Robert Hofinger Purdue University - Columbus You start a new project (program) by going to the File menu in the upper left corner, then New, and then
More informationDC Circuit Simulation
Chapter 2 DC Circuit Simulation 2.1 Starting the Project Manager 1. Select Project Manager from the Start All Program Cadence Release 16.5 Project Manager. 2. Select Allegro PCB Designer (Schematic) from
More information1. INTRODUCTION. PSpice with OrCAD Capture (release 16.6 edition)
1. INTRODUCTION SPICE (Simulation Program for Integrated Circuits Emphasis.) is a powerful general purpose analog and mixed-mode circuit simulator that is used to verify circuit designs and to predict
More informationSCHEMATIC1 SCHEMATIC2 SCHEMATIC1 SCHEMATIC2 SCHEMATIC3 PAGE1 PAGE2 PAGE3 PAGE1 PAGE1 PAGE2 PAGE1 PAGE1 PAGE2
An OrCAD Tutorial Dr. S.S.Limaye 1. Introduction OrCAD is a suite of tools from Cadence company for the design and layout of printed circuit boards (PCBs). This is the most popular tool in the industry.
More informationAPDS Wizard v4 for Nexxim/Designer 4.0 Specially optimized for DDR2/3 SI. Ansoft Korea Team
APDS Wizard v4 for Nexxim/Designer 4.0 Specially optimized for DDR2/3 SI Ansoft Korea Team APDS Wizard v4 All-Renewed, Enhanced Wizard. Version 4 means this new wizard would work with Designer/Nexxim v4
More informationOrcad Layout Plus Tutorial
Orcad Layout Plus Tutorial Layout Plus is a circuit board layout tool that accepts a layout-compatible circuit netlist (ex. from Capture CIS) and generates an output layout files that suitable for PCB
More informationFigure C-4 Captured PSpice design schematic (via screen capture)
Ports from Cadence ORCAD (PSpice): Cadence is the company name (and the folder where you ll find this electronics CAD suite of applications), and ORCAD is the particular CAD application used for design.
More informationEE 210 Lab Assignment #2: Intro to PSPICE
EE 210 Lab Assignment #2: Intro to PSPICE ITEMS REQUIRED None Non-formal Report due at the ASSIGNMENT beginning of the next lab no conclusion required Answers and results from all of the numbered, bolded
More informationGalaxy Custom Designer SE The New Choice in Custom Schematic Editing and Simulation Environment
Datasheet Galaxy Custom Designer SE The New Choice in Custom Schematic Editing and Simulation Environment Overview Galaxy Custom Designer SE is the next-generation choice for schematic entry, enabling
More informationIntroduction to FCE1
Universität Duisburg-Essen PRACTICAL TRAINING TO THE LECTURE Introduction to FCE1 Introduction to computer-aided design with OrCAD Name: First Name: Tutor: Matriculation-Number: Group-Number: Date: Prof.
More informationWhat s New in OrCAD Capture 15.7
1 What s New in OrCAD Capture 15.7 This chapter contains the following sections describing the OrCAD Capture 15.7 (henceforth referred to as Capture) release. New Features and Enhancements on page 6 Multimedia
More informationPSpice with Orcad 10
PSpice with Orcad 10 1. Creating Circuits Using PSpice Tutorial 2. AC Analysis 3. Step Response 4. Dependent Sources 5. Variable Phase VSin Source Page 1 of 29 Creating Circuits using PSpice Start Orcad
More informationFlowCAD. FlowCAD Webinar. Constraint Manager Tips and Tricks.
FlowCAD Webinar Constraint Manager Tips and Tricks FlowCAD Overview Constraint Manager Basic Physical Constraints Spacing Constraints Analysis Mode Differential Pair Total Etch length Constraint Regions
More informationLesson 18: Creating a Hierarchical Block
Lesson 18: Creating a Hierarchical Block Lesson Objectives After you complete this lesson you will be able to: Create hierarchical blocks Copying Schematics between Projects You can copy and paste between
More informationTDK Component Library for Keysight ADS
TDK Component Library for Keysight ADS ver. 2017.10 TDK Corporation Passive Application Center Oct. 26, 2017 Caution < Applicable condition > The parameters in this library are obtained under the condition
More informationIntroduction to Multisim Schematic Capture and SPICE Simulation
Introduction to Multisim Schematic Capture and SPICE Simulation By: Janell Rodriguez and Erik Luther Online: This selection and arrangement of content as a collection
More informationUSB 3.0 Mode for the xsignals Wizard
USB 3.0 Mode for the xsignals Wizard Old Content - visit altium.com/documentation Modified by Lillian Ling on Jun 20, 2016 Released in Altium Designer 15, the xsignals Wizard simplifies the process of
More informationExperiment 8 SIMULINK
Experiment 8 SIMULINK Simulink Introduction to simulink SIMULINK is an interactive environment for modeling, analyzing, and simulating a wide variety of dynamic systems. SIMULINK provides a graphical user
More informationALLEGRO DESIGN ENTRY HDL 610
DATASHEET ALLEGRO DESIGN ENTRY HDL 610 ROBUST AND HIGHLY INTEGRATED SCHEMATIC DESIGN Cadence Allegro Design Entry HDL 610, a 600 series product within the Allegro system interconnect design platform, offers
More information1. Working with PSpice:
Applied Electronics, Southwest Texas State University, 1, 13 1. Working with PSpice: PSpice is a circuit simulator. It uses the Kirchhoff s laws and the iv-relation of the used components to calculate
More informationPCB DESIGNING AN ISO 9001 : 2015 CERTIFIED COMPANY IAO - INTERNATIONAL ACCREDITATION ORGANIZATION ISA - INTERNATIONAL SOCIETY OF AUTOMATION
EMERALD GLOBAL AUTOMATION INDIA PCB DESIGNING AN ISO 9001 : 2015 CERTIFIED COMPANY IAO - INTERNATIONAL ACCREDITATION ORGANIZATION ISA - INTERNATIONAL SOCIETY OF AUTOMATION Do you have the thirst to work
More informationXA 4Y Analytical Balances
XA 4Y Analytical Balances Analytical of the highest quality and accuracy using professional balances Automatic control of the level XA 4Y, d = 0,1 mg Intuitive operation and touch XA 4Y d = 0,01 mg Functions
More informationLesson 9: Processing a Schematic Design
Lesson 9: Processing a Schematic Design Lesson Objectives After you complete this lab you will be able to: Assign reference designators Check the design for errors Create a netlist for OrCAD and Allegro
More informationLesson 8: Component Placement
8 Lesson 8: Component Placement Learning Objectives In this lesson you will: Using floorplanning to organize the placement of components with the same ROOM property Assign reference designators to preplaced
More informationParag Choudhary Engineering Architect
Parag Choudhary Engineering Architect Agenda Overview of Design Trends & Designer Challenges PCB Virtual Prototyping in PSpice Simulator extensions for Models and Abstraction levels Examples of a coding
More informationTanner Analog Front End Flow. Student Workbook
Student Workbook 2016 Mentor Graphics Corporation All rights reserved. This document contains information that is trade secret and proprietary to Mentor Graphics Corporation or its licensors and is subject
More informationSize Limitations: Circuits are limited to 50 components and 75 equations (nodes + inductors + sources).
Micro-Cap 11 Evaluation Version The Evaluation Version is provided as an introduction to the Micro-Cap 11 program. It is a working version and a highly capable product in its own right. It is provided
More informationPost Silicon Electrical Validation
Post Silicon Electrical Validation Tony Muilenburg 1 1/21/2014 Homework 4 Review 2 1/21/2014 Architecture / Integration History 3 1/21/2014 4 1/21/2014 Brief History Of Microprocessors 5 1/21/2014 6 1/21/2014
More informationOrcad Capture Quick Reference
Orcad Capture Quick Reference Shortcut keys The toolbar The schematic page editor tool palette The part editor tool palette Cadence PCB Systems Division (PSD) offices PSD main office (Portland) (503) 671-9500
More informationThe Quality Of 3D Models
The Quality Of 3D Models Problems and Solutions for Applications Post-Design Fathi El-Yafi Senior Product Engineer Product Department of EXA Corporation 1 : Overview Status Problems Identified Defect Sources
More informationOpenVReg. Open Voltage Regulator Specification. Type 0 Revision 1.0. June 10, 2011
OpenVReg Open Voltage Regulator Specification Type 0 Revision 1.0 June 10, 2011 Contents 1 Introduction 1 1.1 Motivation........................................ 1 1.2 Overview.........................................
More informationFlowCAD. FlowCAD Webinar. OrCAD / Allegro PCB Editor Trucs et astuces November 2012
FlowCAD Webinar OrCAD / Allegro PCB Editor Trucs et astuces 8. November 2012 Print Screen from the Canvas Open Windows Explorer with the working folder Z-Copy: Copy a Shape to another Layer Z-Copy: Copy
More informationModel-Based Design for High Integrity Software Development Mike Anthony Senior Application Engineer The MathWorks, Inc.
Model-Based Design for High Integrity Software Development Mike Anthony Senior Application Engineer The MathWorks, Inc. Tucson, AZ USA 2009 The MathWorks, Inc. Model-Based Design for High Integrity Software
More informationFundamentos de Electrónica Lab Guide
Fundamentos de Electrónica Lab Guide PSPICE IST-2016/2017 IST-2017/2018 21º nd Semester PSpice-Guide 1. Introduction SPICE is a simulator program for the project of electronic circuits. SPICE is the acronym
More informationCadence FPGA System Planner technologies are available in the following product offerings: Allegro FPGA System Planner L, XL, and GXL
DATASHEET The Cadence FPGA addresses the challenges that engineers encounter when designing one or more large-pin-count FPGAs on the PCB board which includes creating the initial pin assignment, integrating
More informationLesson 9: Advanced Placement Techniques
9 Lesson 9: Advanced Placement Techniques Learning Objectives In this lesson you will: Turn ratsnests on and off to selectively place components Use interactive swapping for pins and gates Apply advanced
More informationLiTE Design PORTFOLIO
LiTE Design We Focus on scaling to new & latest technology in Electronic Design System, to develop & produce innovative products, services & solutions with our Potential that Exceeds the expectations of
More informationLab 1: Analysis of DC and AC circuits using PSPICE
Lab 1: Analysis of DC and AC circuits using PSPICE 1. Objectives. 1) Familiarize yourself with PSPICE simulation software environment. 2) Obtain confidence in performing DC and AC circuit simulation. 2.
More informationLab 5: Circuit Simulation with PSPICE
Page 1 of 11 Laboratory Goals Introduce text-based PSPICE as a design tool Create transistor circuits using PSPICE Simulate output response for the designed circuits Introduce the Tektronics 571 Curve
More informationComplete PCB Design Using OrCad Capture and Layout
Complete PCB Design Using OrCad Capture and Layout By Kraig Mitzner Amsterdam Boston Heidelberg London New York Oxford Paris San Diego San Francisco Singapore Sydney Tokyo Newnes is an imprint of Elsevier
More informationCadence SPB: What s New in 16.6 QIR 8 (HotFix 38)
Cadence SPB: What s New in 16.6 QIR 8 (HotFix 38) This document describes the new features and enhancements in Cadence SPB products in 16.6 Quarterly Incremental Release (QIR) 8- HotFix38. The products
More informationZenitSuite What s new on Version 2.0
ZenitSuite 2.0 www.zenitpcb.com What s new on Version 2.0 Copyright 2007,2016 Stortini Mirko Bruno. This software is provided as-is, without any expressed or implied warranty. In no event will the author
More informationNew paradigm for MEMS+IC Co-development
New paradigm for MEMS+IC Co-development MEMS 진보된스마트세상을만듭니다. Worldwide First MEMS+IC Co-development Solution New paradigm for MEMS+IC Co-development A New Paradigm for MEMS+IC Development MEMS design
More informationESE 570 Cadence Lab Assignment 2: Introduction to Spectre, Manual Layout Drawing and Post Layout Simulation (PLS)
ESE 570 Cadence Lab Assignment 2: Introduction to Spectre, Manual Layout Drawing and Post Layout Simulation (PLS) Objective Part A: To become acquainted with Spectre (or HSpice) by simulating an inverter,
More informationTHIS IS A GUIDE LISTING
Tektronix 067-0521-00 Calibration Fixture Tektronix 067-0521-01 Calibration Fixture Tektronix 067-0523-00 Type 84 Plug-In Test Unit Tektronix 067-0540-00 Calibration Fixture Tektronix 10A2 Dual Trace Amplifier
More informationTDK Component Library for Keysight ADS
TDK Component Library for Keysight ADS ver. 2015.07 TDK Corporation Passive Application Center July 30, 2015 Caution < Applicable condition > The parameters in this library are obtained under the condition
More informationPro/ENGINEER Wildfire 2.0 Curriculum
Pro/ENGINEER Wildfire 2.0 Curriculum Live Classroom Virtual Class Web Based NOTE: For a graphical depiction of the curriculum based on job role, please visit this page: http://www.ptc.com/services/edserv/learning/paths/ptc/proe_wf2.htm
More informationALLEGRO PCB SI 630 DATASHEET VIRTUAL PROTOTYPING ENVIRONMENT FOR DESIGNS WITH MULTI-GIGAHERTZ SIGNALS THE ALLEGRO SYSTEM INTERCONNECT DESIGN PLATFORM
DATASHEET ALLEGRO PCB SI 630 VIRTUAL PROTOTYPING ENVIRONMENT FOR DESIGNS WITH MULTI-GIGAHERTZ SIGNALS Cadence Allegro PCB SI 630 a key PCB Signal Integrity tool within the Allegro system interconnect design
More informationInnovation in System Design Enablement. Cadence Design Systems, Inc. Graser Technology Conference October 2015
Innovation in System Design Enablement Cadence Design Systems, Inc. Graser Technology Conference October 2015 Social trends driving multiple layers of technology Datacenter Office Cloud Gateway Device
More informationNew Technologies in CST STUDIO SUITE CST COMPUTER SIMULATION TECHNOLOGY
New Technologies in CST STUDIO SUITE 2016 Outline Design Tools & Modeling Antenna Magus Filter Designer 2D/3D Modeling 3D EM Solver Technology Cable / Circuit / PCB Systems Multiphysics CST Design Tools
More informationNordcad Flow menus. Rev Nordcad Systems A/S
Nordcad Flow menus Rev 1.00 2014 Nordcad Systems A/S www.nordcad.dk Support@nordcad.dk Purpose The purpose of the PCB and Footprint flow menus is to guide the user through a number of steps normally involved
More informationOrcad Pcb Designer Orcad Pcb Designer With Pspice
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with orcad pcb designer orcad
More informationLesson 5: Creating Heterogeneous Parts
Lesson 5: Creating Heterogeneous Parts Lesson Objectives After you complete this lesson you will be able to: Create a Heterogeneous part Annotate a Heterogeneous part (Optional) Heterogeneous Parts A heterogeneous
More information2 Working with Constraint Objects
1 Allegro Constraint Manager User Guide 2 Working with Constraint Objects Topics in this chapter include About Constraint Object Hierarchy About Objects Designs and Systems Net Class Net Class-Class Differential
More informationDesign Requirements: Workstation Test System
Design Requirements: Workstation Test System ECE 4890 - Senior Sear April 16, 2010 By: Andrew Dunn & Holly Peterson Faculty Advisor: Bob Kressin Sponsor: Tim Figge, Agilent Table of Contents Overview...
More informationChip/Package/Board Interface Pathway Design and Optimization. Tom Whipple Product Engineering Architect November 2015
Chip/Package/Board Interface Pathway Design and Optimization Tom Whipple Product Engineering Architect November 2015 Chip/package/board interface pathway design and optimization PCB design with Allegro
More informationUsing KiCad with AimSpice Doc 0.2 CETA - Univ. Hartford, Connecticut, USA
Using KiCad with AimSpice Doc 0.2 CETA - Univ. Hartford, Connecticut, USA KiCad is a open source software package for schematic capture and PC board layout. KiCad also provides some capability in producing
More information