SIGNAGE STANDARDS MANUAL RYERSON UNIVERSITY

Transcription

1 SIGNGE STNDRDS MNUL RYERSON UNIVERSITY 350 VICTORI ST, TORONTO, ON M5 2K3 ISSUE FOR TENDER SEPTEMER 1, 2017 Sign Type 1.0/Interior Identification Sign Type 2.0/Interior Directory Sign Type 3.0/Interior Directional Sign Type 4.0/menities Sign Type 10.0/Exterior Identification Sign Type 11.0/Exterior Directory

2 Sign Type 1.0/Interior Identification 317 mm CPK 317 mm Ryerson University Real Institute 99 mm 221 mm CPK 214 Classroom 38 mm 152 mm CPK mm 157 mm Eggy the Ram 220 mm The To ST 1.1.1: Wallmount Department ID - Regular ST 1.2.1: Wallmount Room ID - Regular ST 1.3: Room ID Tag ST 1.4: Workstation ID ST 1.5: Dimensional Cut Lettering (Not to Scale) 445 mm CPK 445 mm Real Institute 227 mm 221 mm ST 1.1.2: Wallmount Department ID - Large ST 1.2.2: Wallmount Room ID - Large NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE 1:6 UNLESS OTHERWISE NOTED VRITIONS IN TEXT/PICTOGRM DEPENDING ON SITE SPECIFIC REQUIREMENTS. PGE 2

3 Sign Type 2.0/Interior Directory 445 mm 445 mm 445 mm Staff Directory You are here Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in anim id est laborum. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in anim id est laborum. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui id est laborum. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui est laborum. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat derit in voluptat set amis. ST 2.1: Wallmount uilding Directory - Large - Header/Panel/Sign/Trailer ST 2.2: Wallmount uilding Directory - Regular - Header/Sign/Trailer ST 2.3: Wallmount Staff Directory - Header/Sign/Trailer NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE 1:6 VRITIONS IN TEXT/PICTOGRM DEPENDING ON SITE SPECIFIC REQUIREMENTS. PGE 3

4 Sign Type 3.0/Interior Directional 600 mm 440 mm 180 mm ST 3.1.1: Suspended Directional - Small 861 mm 221 mm 572 mm ST 3.1.2: Suspended Directional - Medium 1500 mm ST 3.2: Wallmount Directional CPK 202 CPK CPK 214 ST 3.3: Vinyl Directional (Not to Scale) 360 mm 300 mm ST 3.1.3: Suspended Directional - Large 2400 mm ST 3.1.4: Suspended Directional - Extra Large NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE 1:8 UNLESS OTHERWISE NOTED VRITIONS IN TEXT/PICTOGRM DEPENDING ON SITE SPECIFIC REQUIREMENTS. PGE 4

5 Sign Type 4.0/menities 317 mm 216 mm 221 mm 221 mm ll Gender 221 mm 231 mm 317 mm For For assistance please use intercom. 301 mm -2 Stair 1220 mm 1460 mm ST 4.1: Wallmount menity ID ST 4.2: Wall Projecting menity ID ST 4.3.1: Wallmount menity Information 4 ST 4.4: Stairwell ID ST 4.5: Stairwell ID - Vinyl Lettering (Not to Scale) ST 4.6: Glazing Decal (Not to Scale) 317 mm 462 mm ST 4.3.2: Educational Washroom Sign (EWS) 760 mm ST 4.3.3: Ground menity Information (Not to Scale) NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE 1:6 UNLESS OTHERWISE NOTED VRITIONS IN TEXT/PICTOGRM DEPENDING ON SITE SPECIFIC REQUIREMENTS. PGE 5

6 Sign Type 10.0/Exterior Identification 900 mm 900 mm 2400 mm 900 mm 406 mm 1350 mm 900 mm 254 mm ST : Wallmount uilding Number 406 mm 254 mm ST 10.1: Monolith uilding ID - Sign/Panel/Trailer ST 10.2: Post & Panel uilding ID ST 10.3: Wallmount uilding ID ST : Wallmount uilding Number - Vinyl NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE 1:12 VRITIONS IN TEXT/PICTOGRM DEPENDING ON SITE SPECIFIC REQUIREMENTS. PGE 6

7 Sign Type 11.0/Exterior Directional 1200 mm 2235 mm ST 11.1: Campus Map NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE Not to Scale PGE 7

8 Colours The primary palette consists of Ryerson, Ryerson Gold, Light Grey, lack and. Signage Colours Signage needs to be of contrast and scale such that visitors with visual impairments can identify and read the text on signage. Print letters and numerals on signage needs to have a tonal contrast of at least 70% with their background and be finished with a matte or glare-free surface. This allows visitors with limited visual capacity to still determine signage even if they cannot read the copy and may need to physically adjust their distance. PMS 2945c C100 M60 Y0 K15 R0 G Vinyl: 3M Vivid (220-17) Gold PMS 109c C0 M10 Y100 K0 R255 G220 0 Vinyl: 3M right Yellow (220-15) Dark Grey C0 M0 Y0 K40 R153 G Vinyl: 3M Medium Grey (220-31) Light Grey PMS 427c C0 M0 Y0 K15 R217 G Vinyl: 3M Pearl Grey Vinyl (220-11) lack C0 M0 Y0 K100 R0 G0 0 Vinyl: 3M Matte lack (220-12) C0 M0 Y0 K0 R255 G Vinyl: 3M Matte (220-20) Regulatory Colours Green Red Safety ie. Eye wash station Regulatory ie. No Smoking ccessibility ie. utomatic door PMS 341c C95 M5 Y82 K24 R0 G Vinyl: very right Green (SC ) PMS 485c C0 M95 Y100 K0 R218 G41 28 Vinyl: 3M tomic Red ( ) PMS 2935c C100 M52 Y0 K0 R0 G Vinyl: 3M Intense (220-47) NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE PGE 8

9 Typography Replica Std is the primary typeface of and it is used for all interior and exterior signage. Replica Std old, Light and Regular are used to differentiate levels of information through contrasting weights. CDEFGHIJKLMNOP QRSTUVWXYZ abcdefghijklmnop qrstuvwxyz Replica Std old CDEFGHIJKLMNOP QRSTUVWXYZ abcdefghijklmnop qrstuvwxyz Replica Std Light CDEFGHIJKLMNOP QRSTUVWXYZ abcdefghijklmnop qrstuvwxyz Replica Std Regular rrows NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE PGE 9

10 Pictograms Pictograms serve as a form of universal communication regardless of ones language. They incorporate a combination of text, numbers, symbols, graphic imagery to create easily identifiable symbols. These symbols are known as pictograms and have proven to be very effective, easy to understand and simple to implement into a wayfinding system. Due to the cultural diversity at, the use of pictograms is essential in providing information to students and visitors as they are universally recognizable across all language barriers. menity Symbols Men ccessible Shower Women s Changeroom Women ccessible Shower ll Gender Changeroom ccessible Men Men s Shower ccessible Changeroom ccessible Women Women s Shower Laundry Room Shower Men s Changeroom ll Gender Washroom WHMIS Symbols Explosive Flammables Oxidizing Carcinogenicity etc. iohazardous Infectious Materials Corrosive Regulatory Symbols Hazardous to the aquatic environment cute Toxicity cute toxicity (Fatal or toxic) Gas under pressure Change Station ll Gender ccessible ll Gender w Shower ll Gender ccessible Shower ll Gender ll Gender ccessible w ccessible w dult Change Station aby & dult Harness Change Station Do Not Enter No Cameras No Food or Drink No Cell Phones No Parking No Smoking TM uditorium/ Theatre Cafeteria Elevator Stairs ccessible Eyewash w Shower Eyewash First id Emergency Telephone Information Telephone Emergency Telephone NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE PGE 10

11 Interior Identification Sign Type Wallmount Department ID - Regular crylic panel sign painted to match PMS 427C Header: 61mm high vinyl band wrap in Vivid mm Room Number : Replica Std old 93pt Optical Kerning, +30 Tracking CL=31mm on Matte vinyl 317 mm CPK Ryerson University Real Institute C C Text I: Replica Std old 130 pt Optical Kerning, +30 tracking Text II: Replica Std Light 80 pt Optical Kerning, +30 tracking Leading between Message & is 128pt, CL=31mm on bottom Grey Panel Matte lack vinyl type PMS 2945C 3M Vivid Vinyl (220-17) Grey PMS 427C lack 3m Matte lack Vinyl (220-20) 1:4 3M Matte (220-20) 150 mm 1. Signs shall be installed on the wall adjacent to the latch side of the door, mounted at a height of 1350mm from finish floor level to center line of sign. 2. Where there is no wall space to the latch side of the door, including double leaf doors, signs shall be placed at the nearest adjacent wall FF 3. For mounting, double-sided tape to be used on smooth surfaces such as drywall, glass and tile. Mounting on other surfaces such as brick, rough concrete etc. is to be decided on project specific basis. 4. Grey (PMS 427C) vinyl backer sized to match sign required when installed on glass surfaces. TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 11

12 Interior Identification Sign Type Wallmount Department ID - Large crylic panel sign painted to match PMS 427C 445 mm Header: 93mm high vinyl band wrap in Vivid 42 mm Room Number : Replica Std old 130pt Optical Kerning, +10 Tracking CL=42mm on Matte vinyl 93 mm CPK C Text I: Replica Std old 180/180 pt Optical Kerning, +10 tracking Text II: Replica Std Light 108/108 pt Optical Kerning, +10 tracking Leading between Message & is 180pt, CL=42mm on bottom Grey Panel 445 mm 352 mm Real Institute C PMS 2945C Grey PMS 427C lack 3m Matte lack Vinyl (220-20) 3M Matte (220-20) 150 mm 1. Signs shall be installed on the wall adjacent to the latch side of the door, mounted at a height of 1350mm from finish floor level to center line of sign. 1:4 CPK Real Institute 1350 FF 2. Where there is no wall space to the latch side of the door, including double leaf doors, signs shall be placed at the nearest adjacent wall. 3. For mounting, double-sided tape to be used on smooth surfaces such as drywall, glass and tile. Mounting on other surfaces such as brick, rough concrete etc. is to be decided on project specific basis. 4. Grey (3M Pearl Grey (220-11)) vinyl backer, sized to match sign, required when installed on glass surfaces. TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 12

13 Classroom Interior Identification Sign Type Wallmount Room ID - Regular 221 mm Sign: luminum sign holder extrusion, clear anodized finish w/ black end-caps 99 mm CPK 214 Classroom Tactile Lens: 16mm Thick Clear crylic with custom applied copy in, max profile of 0.8mm. Reverse applied vinyl 28mm height Room Number: Replica Std old 65pt Optical Kerning, 0 Tracking L=18mm & T=11mm raille: Translates room number Uncontracted (Grade 1) braille Raised 0.8mm (1/32 ) Clear raster braille beads L=18mm & =10mm Signage provider to ensure correct braille translation :2 216 mm 23 CPK 214 C Digital Print Insert: Text I: Replica Std old 52/48 pt Optical Kerning, 0 Tracking Text II: Replica Std Light 38/40 pt Optical Kerning, 0 Tracking Leading between Message & is 40pt, L=18mm & =20mm Digital printed on satin photo paper. lack text on Grey (PMS 427c) background 93 mm mm 3M Vivid Vinyl (220-17) Grey PMS 427C TCTILE LENS 1:2 216 mm CPK 214 lack 3m Matte lack Vinyl (220-20) 3M Matte (220-20) 60 mm Classroom DIGITL PRINT INSERT 1:2 C TYPICL ELEVTION 1350 FF 1. Tactile lens to be removable to allow for digital print insert to be changed. 2. Signs shall be installed on the wall adjacent to the latch side of the door, mounted at a height of 1350mm from finish floor level to center line of sign. 3. For mounting, double-sided tape to be used on smooth surfaces such as drywall, glass and tile. Mounting on other surfaces such as brick, rough concrete etc. to be decided on project specific basis. 4. Grey (3M Pearl Grey (220-11)) vinyl backer, sized to match sign required when installed on glass surfaces. NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 13

14 Interior Identification Sign Type Wallmount Room ID - Large Sign: luminum sign holder extrusion, clear anodized finish w/ black end-caps 221 mm mm mm Tactile Lens: 16mm Thick Clear crylic with custom applied copy in, max profile of 0.8mm. Reverse applied vinyl 28mm height Room Number: Replica Std old 65pt Optical Kerning, 0 Tracking L=18mm & T=11mm 221 mm 187 mm raille: Translates room number. Uncontracted (Grade 1) braille Raised 0.8mm (1/32 ) Clear raster braille beads L=18mm & =10mm Signage provider to ensure correct braille translation. 106 C Digital Print Insert: Text I: Replica Std old 52/48 pt Optical Kerning, 0 Tracking 227 mm a.m. - 6 p.m. TCTILE LENS 1:3 DIGITL PRINT INSERT 1:3 C Text II: Replica Std Light 38/40 pt Optical Kerning, 0 Tracking Leading between Message & is 40pt, L=18mm & =20mm Digital printed on satin photo paper. lack text on Grey (PMS 427c) background 3M Vivid Vinyl (220-17) 150 mm 150 mm Grey PMS 427C 1:2 lack 3m Matte lack Vinyl (220-20) 3M Matte (220-20) 1350 FF 1350 FF 1. Tactile lens to be removable to allow for digital print insert to be changed. 2. Signs shall be installed on the wall adjacent to the latch side of the door, mounted at a height of 1350mm from finish floor level to center line of sign. TYPICL ELEVTION 3. For mounting, double-sided tape to be used on smooth surfaces such as drywall, glass and tile. Mounting on other surfaces such as brick, rough concrete etc. to be decided on project specific basis. 4. Grey (3M Pearl Grey (220-11)) vinyl backer, sized to match sign required when installed on glass surfaces. NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 14

15 Interior Identification Sign Type 1.3 Room ID Tag Sign:.080 crylic SPE Replica Std 75 pt, CC uto Kerning, +10 Tracking 152 mm CL PMS 2945C 3M Matte (220-20) 38 mm CPK Signs should be mounted using double-sided tape to door frame. 1:1 2. Sign to be positioned on the top left side of the door. CPK 223 CPK 241 CPK 240 CPK 239 CPK 242 CPK 243 CPK 245 CPK 246 CPK 207C 1:4 TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 15

16 Eggy the Ram Interior Identification Sign Type 1.4 Workstation ID 157 mm CL crylic sign holder with clear front, secured to partition with double sided tape Paper Insert: Pre-perforated paper stock Replica Std old 35, CC Optical Kerning, +10 Tracking lack 61 mm Eggy the Ram 1. crylic front to allow for paper insert to be replaced. 2. Workstation ID requires a stand when no mounting surface is available. 1:1 3. For mounting, double-sided tape to be used on smooth surfaces such as drywall, glass and tile. Mounting on other surfaces such as brick, rough concrete etc. to be decided on project specific basis. 4. Grey (3M Pearl Grey (220-11)) vinyl backer required when installed on glass surfaces. 50 Eggy the Ram 50 1:30 PPER INSERT 1:1 TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 16

17 Interior Identification Sign Type 1.5 Lettering - Dimensional Cut Replica font in 1/4 brushed aluminum, white, or black to complement wall colour Letter sizing and colour will vary based on the space and the content. 3M Vivid Vinyl (220-17) 3M Matte (220-20) Silver MX15 Silver 1. Mounting of text will vary project to project. In general, these signs will require concealed mechanical fasteners. The Toronto Star Newspapers Centre for Journalism Production 9741 mm 221 mm The To 1/4 luminum Dimensional Lettering with 1/8 studs for mounting Field: SC 905 lack (Satin Finish) NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 17

18 Interior Directory Sign Type 2.1 Wallmount uilding Directory - Large mm mm Header: Interior crylic Graphic Panel w/ Gerber Edge decal Ryerson logo surface applied Panel: Interior Graphic Panel w surface applied vinyl graphic Level Number: Replica Std old 500pt L=39 & T=69mm uilding Name: Replica Std old 135/135pt Optical Kerning, +10 Tracking L=39 & =102mm C Sign: Interior Wallmounted Sign c/w side extrusions and back plate painted MX15 Satin luminum. Digital print insert with Emboss laminate finish anchored to back plate with two strips of double-sided tape on edges. Destination/Text: Replica Std Regular 46/64pt 25mm IL between groups of text, CL=39mm Optical Kerning, +10 Tracking Level Number: Replica Std old 80pt, R=37mm Optical Kerning, +10 Tracking D Trailer: Interior Graphic Panel 1113 mm 1113 mm C 3M Vivid Vinyl (220-17) Yellow 3m right Yellow Vinyl (220-15) 3M Matte (220-20) LIGN TO OTTOM OF LUE SIGN lack Grey PMS 427C FF Dark Grey 3M Medium Grey (220-31) 1. Sign to be mounted using concealed mechanical fasteners. 29 1:8 29 D TYPICL ELEVTION 2. The location of the fasteners should be restricted to joints whenever possible. 3. Sign to be mounted with bottom of blue panel at 1525 mm from finished floor. NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 18

19 Interior Directory Sign Type 2.2 Wallmount uilding Directory - Regular Header: Interior crylic Graphic Panel w/ surface applied vinyl graphic Sign Name: Replica Std old 142pt L= mm 37 Sign: Interior Wallmounted Sign c/w side extrusions and back plate painted MX15 Satin luminum. Digital print insert with Emboss laminate finish anchored to back plate with two strips of double-sided tape on edges. Destination/Text: Replica Std old 67pt 32mm IL between groups of text, CL=39mm Optical Kerning, +10 Tracking Level Number: Replica Std old 105pt, R=37mm Optical Kerning, +10 Tracking 445 mm C Trailer: Interior Graphic Panel M Vivid Vinyl (220-17) 660 mm 3M Matte (220-20) 285 lack Grey PMS 427C mm 29 C 1. Signs shall be installed on the wall adjacent to the latch side of the door, mounted at a height of 1350mm from finish floor level to center line of sign. 1: FF 2. Where there is no wall space to the latch side of the door, including double leaf doors, signs shall be placed at the nearest adjacent wall. 3. Sign to be mounted using concealed mechanical fasteners. 4. The location of the fasteners should be restricted to joints whenever possible. 29 TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 19

20 You are here Lorem ipsum dolor sit amet, ea commodo consequat. Duis consectetur adipiscing elit, sed aute irure dolor in reprehenderit in voluptate velit esse cil- dolor sit amet, consectetur id est laborum. Lorem ipsum do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, atur. Excepteur sint occaecat tempor incididunt ut labore et lum dolore eu fugiat nulla pari- adipiscing elit, sed do eiusmod quis nostrud exercitation ullamco laboris nisi ut aliquip ex ad minim veniam, quis nostrud cupidatat non proident, sunt in dolore magna aliqua. Ut enim ea commodo consequat. Duis anim id est laborum. exercitation ullamco laboris nisi aute irure dolor in reprehenderit in voluptate velit esse cil- Lorem ipsum dolor sit amet, sequat. Duis aute irure dolor ut aliquip ex ea commodo conlum dolore eu fugiat nulla pariatur. Excepteur sint occaecat sed do eiusmod tempor velit esse cillum dolore eu consectetur adipiscing elit, in reprehenderit in voluptate cupidatat non proident, sunt in incididunt ut labore et dolore fugiat nulla pariatur. Excepteur magna aliqua. Ut enim ad sint occaecat cupidatat non anim id est laborum. minim veniam, quis nostrud proident, sunt in culpa qui exercitation ullamco laboris nisi Lorem ipsum dolor sit amet, ut aliquip ex ea commodo consequat. Duis aute irure dolor est laborum. consectetur adipiscing elit, sed do eiusmod tempor incididunt in reprehenderit in voluptate Ut enim ad minim veniam, quis ut labore et dolore magna aliqua. Ut enim ad minim veniam, fugiat nulla pariatur. Excepteur laboris nisi ut aliquip ex ea velit esse cillum dolore eu nostrud exercitation ullamco quis nostrud exercitation ullamco laboris nisi ut aliquip ex proident, sunt in culpa qui voluptat set sint occaecat cupidatat non commodo consequat derit in amis. Interior Directory Sign Type 2.3 Wallmount Staff Directory Header: Interior crylic Graphic Panel w/ surface applied vinyl graphic Sign Name: Replica Std old 154pt L=39 Map: Interior Graphic Panel with map surface applied mm Staff Directory Panel: Interior Wallmounted Sign c/w side extrusions and back plate painted MX15 Satin luminum. Digital print insert with Emboss laminate finish anchored to back plate with two strips of double-sided tape on edges. Destination/Text: Replica Std Regular 32pt CL=39mm Optical Kerning, +10 Tracking C Trailer: Interior Graphic Panel 599 mm Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in anim id est laborum. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in anim id est laborum. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui You are here id est laborum. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui est laborum. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat derit in voluptat set amis. 3M Vivid Vinyl (220-17) 3M Matte (220-20) lack Grey PMS 427C 29 1:8 C Staff Directory 1. Signs shall be installed on the wall adjacent to the latch side of the door, mounted at a height of 1350mm from finish floor level to center line of sign. 2. Where there is no wall space to the latch side of the door, including double leaf doors, signs shall be placed at the nearest adjacent wall FF 3. Sign to be mounted using concealed mechanical fasteners. 4. The location of the fasteners should be restricted to joints whenever possible. TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 20

21 Interior Directional Sign Type Suspended Directional - Small Sign: Interior crylic Graphic Panel w/ surface applied vinyl graphic 600 mm Panel: Messaging: Replica Std old 185/185p Optical Kerning, +10 Track CL=76mm from arrow/edge panel rrow: 110mm wide, CL/R-27mm 180 mm 3M Vivid Vinyl (220-17) - SIDE 1:8 136 mm 136 mm Yellow 3m right Yellow Vinyl (220-15) 3M Matte (220-20) ceiling 27 ircraft cable for ceiling suspension 1. Sign construction should allow for easy dusting and cleaning. 2. Suspend sign using aircraft cabling securely fastened to ceiling material. - SIDE 1: FF - SIDE - SIDE - SIDE - SIDE VRITIONS 1:16 TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 21

22 Interior Directional Sign Type Suspended Directional - Medium Sign: Interior crylic Graphic Panel w/ surface applied vinyl graphic mm Panel: Messaging: Replica Std old 185/185p Optical Kerning, +10 Track CL=76mm from arrow/edge panel rrow: 110mm wide, CL/R-27mm 221 mm 3M Vivid Vinyl (220-17) Yellow 3m right Yellow Vinyl (220-15) - SIDE 1:8 3M Matte (220-20) 136 mm 136 mm 1. Sign construction should allow for easy dusting and cleaning. Ceiling 2. Suspend sign using aircraft cabling securely fastened to ceiling material. 76 ircraft cable for ceiling suspension 38 - SIDE 1: FF TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 22

23 Interior Directional Sign Type Suspended Directional - Large Sign: Interior crylic Graphic Panel w/ surface applied vinyl graphic 1500 mm Panel: Messaging: Replica Std old 185/185p Optical Kerning, +10 Track CL=76mm from arrow/edge panel rrow: 110mm wide, CL/R-27mm 300 mm 3M Vivid Vinyl (220-17) Yellow 3m right Yellow Vinyl (220-15) - SIDE 1:8 3M Matte (220-20) Ceiling 190 mm 190 mm ircraft cable for ceiling suspension 1. Sign construction should allow for easy dusting and cleaning. 2. Suspend sign using aircraft cabling securely fastened to ceiling material. - SIDE 1: FF - SIDE 1:16 - SIDE 1:16 TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 23

24 Interior Directional Sign Type Suspended Directional - Extra Large 2400 mm Sign: Interior crylic Graphic Panel w/ surface applied vinyl graphic Panel: Messaging: Replica Std old 185/185p Optical Kerning, +10 Track CL=76mm from arrow/edge panel rrow: 110mm wide, CL/R-27mm 360 mm 3M Vivid Vinyl (220-17) - SIDE 1:8 190 mm 190 mm Yellow 3m right Yellow Vinyl (220-15) 3M Matte (220-20) Ceiling ircraft cable for ceiling suspension 1. Sign construction should allow for easy dusting and cleaning. 2. Suspend sign using aircraft cabling securely fastened to ceiling material. - SIDE 1: FF - SIDE 1:16 - SIDE 1:16 TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 24

25 Interior Directional Sign Type 3.2 Wallmount Directional 440 mm 440 mm Sign: Interior Wallmounted Sign c/w side extrusions and back plate painted MX15 Silver anchored to wall via two (2) 9 module aluminum rails, lack anodized Lens: Digital print with Emboss laminate anchored to back plate with two strips of double-sided tape on edges Destination/Text: Replica Std old 78/78pt Room Number: Replica Std old 78/90pt 25mm IL between groups of text, CC in grey background Optical Kerning, +10 Tracking rrow: 52mm wide, CC in blue bar 285 mm 285 mm M Vivid Vinyl (220-17) Grey PMS 427C lack 3m Matte lack Vinyl (220-20) 3M Matte (220-20) Silver MX15 Silver 285 mm 285 mm 1350 FF 1. For mounting, double-sided tape to be used on smooth surfaces such as drywall, glass and tile. Mounting on other surfaces such as brick, rough concrete etc. is to be decided on project specific basis. 2. Signs shall be mounted at a height of 1350mm from finish floor level to center line of sign. SIGN 1:4 TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 25

26 Interior Directional Sign Type 3.3 Vinyl Directional 1:4 35 mm 35 mm CPK mm 98 mm CPK CPK 214 Sign: Print Vinyl pplique Replica Std 75 pt, CC uto Kerning, +10 Tracking Vinyl to be matte finish. Color can vary to provide contrast to background wall. 3M Vivid Vinyl (220-17) Dark Grey 3M Medium Grey (220-31) 1. Vinyl Directional signs are used when Suspended Directional signs are not appropriate. 2. Signs shall be mounted 51 mm min. above door frame. This would establish mounting height for all of the Vinyl Directional signs for the project. CENTER LINE OF CORRIDOR PPROCH EYOND CPK 202 CPK 209 CPK CPK CPK 214 CPK CPK CPK CPK min. ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 26

27 ll Gender Restroom menities Sign Type 4.1 Wallmount menity ID 221 mm CL Sign: luminum sign holder extrusion w/ clear anodized finish c/w black plastic end cap 98 Tactile Lens: 16mm Thick Clear acrylic with custom applied copy in, max profile of 0.8mm c/w reverse applied vinyl 110 Picto: Raised 0.8mm (1/32 ) Height=100mm, CT=37mm Colour to match Matte Text I: Replica Std old 65pt, Optical Kerning, +10 Tracking C=26mm, Matte 221 mm 217 mm raille: Uncontracted (Grade 1) braille Raised 0.8mm (1/32 ) Clear raster braille beads, C=10mm Signage provider to ensure correct braille translation. ll Gender Washroom ll Gender Washroom 3M Vivid Vinyl (220-17) 3M Matte (220-20) 1: LENS 1: Signs shall be installed on the wall adjacent to the latch side of the door, mounted at a height of 1350mm from finish floor level to center line of sign. 2. For mounting, double-sided tape to be used on smooth surfaces such as drywall, glass and tile. Mounting on other surfaces such as brick, rough concrete etc. is to be decided on project specific basis FF Women Men ll Gender Washroom VRITIONS 1:8 TYPICL ELEVTIONS NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 27

28 ll Gender Washroom ll Gender Washroom menities Sign Type 4.2 Wall Projecting menity ID 231 mm Sign: Interior Projected Sign (#614037) c/w extruded aluminum alloy mounting unit, Charcoal Grey Secured with wall anchors and screws Panel: Pictogram: 152 mm height, CC Double sided graphic C C 7 module aluminum rail, lack anodized, Four (4) req d 3M Vivid Vinyl (220-17) 3M Matte (220-20) mm 1. Sign to be mounted using concealed mechanical fasteners. 2. When installed on brick, concrete block or tile, location of fasteners should be restricted to joints whenever possible. 3. Signs shall be installed on the wall adjacent to the latch side of the door 150 mm from edge of door frame to center line of sign, mounted at a height of 2200 mm from finish floor level to bottom of sign :2 SIDE VIEW 1: FF 2200 FF 2200 FF MLE WSHROOM ll Gender Washroom LL GENDER UNIVERSL WSHROOM ll Gender Washroom LL GENDER WSHROOM VRITIONS 1:8 TYPICL ELEVTION TYPICL ELEVTION - SIDE VIEW OF SIGN NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 28

29 menities Sign Type Wallmount menity Information 317 mm Sign:.080 crylic Replica Std old 144/144pt uto Kerning, +10 Tracking TL = 30mm Sign:.080 crylic Replica Std old 144/144pt uto Kerning, +10 Tracking TL = 30mm 30 For 317 mm 25 Emergency Telephone For emergencies please dial 80. For CSS Helpdesk please dial Text I: Replica Std old 72/72pt, uto Kerning, +10 Tracking IL=30mm PMS 2945C 317 mm assistance please use intercom. Card ccess Only For accessible and general entry to Real Institute, please use 424 Yonge Street entrance. Day Use Lockers Only Lockers will self unlock at 12 a.m. every day. is not responsible for lost or stolen items. Day Use Lockers Only Lockers will self unlock at 12 a.m. every day. is not responsible for lost or stolen items. 1. Signs shall be mounted at recommended height of 1350mm from finish floor level to center line of sign. Height may be project specific, dependent on location and purpose of sign. 2. For mounting, double-sided tape to be used on smooth surfaces such as drywall, glass and tile. Mounting on other surfaces such as brick, rough concrete etc. is to be decided on project specific basis. 3. Grey (3M Pearl Grey (220-11)) vinyl backer, sized to match sign required when installed on glass surfaces. VRITIONS 1:8 Emergency Pull Station 1350 FF On campus phones dial 80! 1:2 TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 29

30 t Ryerson we respect everyone s right to choose the changeroom appropriate for them. For more information, visit ryerson.ca/equity/washrooms. menities Sign Type Educational Washroom Sign (EWS) Sign: 11 x 17 crylic Panel c/w reverse applied print. PMS 2945C This is an all gender changeroom. nyone may use this space. Yellow PMS 109C 1. Signs shall be mounted at a height of 1350mm from finish floor level to center line of sign. 2. For mounting, double-sided tape to be used on smooth surfaces such as drywall, glass and tile. Mounting on other surfaces such as brick, rough concrete etc. is to be decided on project specific basis. t Ryerson we respect everyone s right to choose the changeroom appropriate for them. For more information, visit ryerson.ca/equity/washrooms. 3. Grey (3M Pearl Grey (220-11)) vinyl backer, sized to match sign required when installed on glass surfaces. - SIGN FOR LL GENDERED WSHROOM / UNIVERSL WSHROOM 1:4 - SIGN FOR MENS WSHROOM 1:4 - SIGN FOR MENS WSHROOM 1:4 - SIGN FOR LL GENDER CHNGE ROOM 1:4 This is an all gender changeroom. Day Use nyone Lockers may use Only this Lockers space. will self unlock at 12 a.m. every day. is not responsible for lost or stolen items FF TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE 1:4 This is an all gender changeroom. PGE 30 nyone may use

31 menities Sign Type Ground menity Information Sign: Stencil and Paint: alkyd tape to CGS 1-GP-74M + mdt-may-81 : Traffic Paint 9011 by ICI or approved product by other manufacturer. 760 mm - GROUND VIEW - SIGN FOR ICYCLE PRKING NOT TO SCLE NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE 1:4 PGE 31

32 Interior menities Sign Type 4.4 Stairwell ID Sign: 4mm thick photopolymer 0.8mm (1/32 ) raised copy, pictogram and braille. 301 mm mm CL -2 Stair FF Stairwell Number: Replica Std old 243pt Optical Kerning, +10 Tracking CT=25mm Stair Picto: 80mm high, CT=120mm Message i: Replica Std old 65/65pt Optical Kerning, +10 Tracking C=27mm in vinyl raille: Uncontracted (Grade 1) braille Clear raster braille beads C=10mm Signage provider to ensure correct braille translation. PMS 2945C 1. Signs shall be installed on the wall adjacent to the latch side of the door, mounted at a height of 1350mm from finish floor level to center line of sign. 2. For mounting, double-sided tape to be used on smooth surfaces such as drywall, glass and tile. Mounting on other surfaces such as brick, rough concrete etc. is to be decided on project specific basis. 3. Grey (3M Pearl Grey (220-11)) vinyl backer, sized to match sign required when installed on glass surfaces. 1:2 TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 32

33 menities Sign Type 4.5 Stairwell ID - Vinyl Lettering Sign: Message i: Replica Std old 65/65pt Optical Kerning, +10 Tracking C=27mm in vinyl PMS 2945C 1. Use white vinyl when the wall is a darker colour mm TYPICL ELEVTION NOT TO SCLE NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE 1:8 PGE 33

34 menities Sign Type 4.6 Glazing Decal Refer to specification section This glazing decal is available in grey, yellow and blue. Colour can be chosen based on the space. 3M Vivid Vinyl (220-17) Yellow 3m right Yellow Vinyl (220-15) DETIL VIEW NOT TO SCLE Grey 3M Pearl Grey Vinyl (220-11) 1. To be installed on interior face, unless otherwise indicated. Reverse print when installed to inside face of glass /2 (1460) 4 (100) NOT TO SCLE NOT TO SCLE NOT TO SCLE NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 34

35 Exterior Identification Sign Type 10.1 Monolith uilding ID Panel: Logo: L = 53mm & T = 53mm uilding Name: Replica Std Regular 190pt Optical Kerning, +10 Tracking L = 53mm & T = 127mm mm 100 mm uilding ddress: Replica Std old 165/165pt Optical Kerning, +10 Tracking 80mm IL between building code and building name M Vivid Vinyl (220-17) 2260 mm Yellow 3m right Yellow Vinyl (220-15) 3M Matte Vinyl (220-20) Grey PMS 427C 1. Ryerson to provide concrete base c/w threaded mounting rods. 2. Signage provider to confirm locations of threaded rods and provide support as required. Provide engineer stamped drawings for support. 3. Provide anodized aluminum closer panels for top and sides, with concealed fasteners FF 1:15 SIDE VIEW 1:15 VRITIONS 1:30 TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 35

36 Exterior Identification Sign Type 10.2 Post & Panel uilding ID Panel: Logo: L = 53mm & T = 53mm uilding Name: Replica Std Regular 190pt Optical Kerning, +10 Tracking L = 53mm & T = 348mm uilding ddress: Replica Std old 165/165pt Optical Kerning, +10 Tracking 80mm IL between building code and building name 3M Vivid Vinyl (220-17) Yellow 3m right Yellow Vinyl (220-15) 900 mm 100 mm 3M Matte (220-20) 60 Grey PMS 427C eq. eq. 1. Ryerson to provide concrete base c/w threaded mounting rods Signage provider to confirm locations of threaded rods and provide support as required. Provide engineer stamped drawings for support mm 900 FF 1350 FF 3. Provide anodized aluminum closer panels for top and sides, with concealed fasteners. 1:15 SIDE VIEW 1:15 VRITIONS 1:30 TYPICL ELEVTION NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 36

37 Exterior Identification Sign Type 10.3 Wallmount uilding ID Sign: Exterior Wall Sign c/w exterior wall rails Panel: Logo: L = 53mm & T = 53mm uilding Name: Replica Std Regular 190pt Optical Kerning, +10 Tracking L = 53mm & T = 348mm uilding ddress: Replica Std old 165/165pt Optical Kerning, +10 Tracking 80mm IL between building code and building name Hidden fasteners 13mm Max. TOP VIEW 1:15 Hidden fasteners 3M Vivid Vinyl (220-17) Yellow 3m right Yellow Vinyl (220-15) 3M Matte (220-20) 0 mm 900 mm Grey PMS 427C eq. 1. Use concealed mechanical fasteners as the mounting method for brick, concrete and heavier signs. eq. eq. 2. The location of the fasteners should be restricted to joints whenever possible. 900 mm eq mm 1:15 VRITION 1:30 TYPICL ELEVTION 1:100 NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 37

38 eq. Exterior Identification Sign Type Wallmount uilding Number 900 mm Panel: 1/8 Painted luminum base c/w predrilled 3/8 mounting holes at each corner, supplied with matching plastic screw cap painted PMS 2945 Number: 1/4 Flat cut aluminum dimensional letters painted Replica Std old 550pt, CC Optical Kerning, +10 Tracking mm 160 eq. 3M Vivid Vinyl (220-17) 3M Matte (220-20) eq. 1. Use concealed mechanical fasteners as the mounting method for brick, concrete and heavier signs. 1:5 2. The location of the fasteners should be restricted to joints whenever possible. 3. Signs shall be mounted centered to a reference panel. Height may be project specific, dependent on location. eq. eq. eq. VRITION 1:10 TYPICL ELEVTION 1:100 NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 38

39 Exterior Identification Sign Type Wallmount uilding Number - Vinyl Panel: Vinyl Number: Replica Std old 550pt, CC Optical Kerning, +10 Tracking in vinyl 900 mm 3M Vivid Vinyl (220-17) 254 mm 120 eq. 3M Matte (220-20) 1. For mounting, double-sided tape to be used on smooth surfaces such as drywall, glass and tile. eq. 2. Signs shall be mounted centered to a reference panel. Height may be project specific, dependent on location. 1:5 C L C L TYPICL ELEVTION 1:100 NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 39

40 Exterior Directional Sign Type 11.1 Campus Map Header: Logo: L = 53mm & T = 53mm 1200 mm 100 mm Website Name: Replica Std Regular 184pt Optical Kerning, +10 Tracking L = 25mm & = 53mm 53 Map: Digital Print Graphics for Campus Map and Legend 2235 mm SIDE 1:15 SIDE VIEW 1:15 - SIDE 1: FF C TYPICL ELEVTION C Directory: Replica Std old/regular 38/38pt Optical Kerning, +10 Tracking 3M Vivid Vinyl (220-17) Yellow 3m right Yellow Vinyl (220-15) 3M Matte (220-20) lack Grey PMS 427C Dark Grey 3M Medium Grey (220-31) Green very right Green (SC ) Red 3M tomic Red ( ) 3M Intense (220-47) 1. Ryerson to provide concrete base c/w threaded mounting rods. 2. Signage provider to confirm locations of threaded rods and provide support as required. Provide engineer stamped drawings for support. 3. Provide anodized aluminum closer panels for top and sides, with concealed fasteners. NUMER SIGNGE STNDRDS MNUL CRETED / MODIFIED DTE DRWN / CHECKED SCLE S NOTED PGE 40