Table of Contents. How SmartLINQ TruckTech+ Works Fault Code Indicators What the Driver Sees Sample Notification...

Size: px

Start display at page:

Download "Table of Contents. How SmartLINQ TruckTech+ Works Fault Code Indicators What the Driver Sees Sample Notification..."

Roderick Sherman
5 years ago
Views:

2 Table of Contents How SmartLINQ TruckTech+ Works Fault Code Indicators What the Driver Sees... 4 Sample Notification... 5 What to Do After the Notification... 6 PACCAR Solutions Portal... 6 What s on the Dashboard... 7 How to Set a Preferred Dealer... 8 How to Get Vehicle Information... 9 How to Get Dealership Information Creating and Managing Vehicle Groups How to Add Users How to Edit Users...16 How to Subscribe to Notifications Frequently Asked Questions KW Rev. 12/15

How TruckTech+ SmartLINQ Works Kenworth TruckTech+ takes remote diagnostics a giant step forward it goes beyond diagnostics and

Assistance or designated personnel at a dealership the customer has selected) to monitor a truck s operation 24/7, regardless of

3 How TruckTech+ SmartLINQ Works Kenworth TruckTech+ takes remote diagnostics a giant step forward it goes beyond diagnostics and driver alerts to provide detailed communication about problems as they occur, recommended actions, and guidance for how to resolve the problem. It enables the vehicle s Primary Care Provider (The Primary Care Provider may be the truck s owner, a fleet manager, Roadside Assistance or designated personnel at a dealership the customer has selected) to monitor a truck s operation 24/7, regardless of where the truck or the user are located. This facilitates quick communication between the Primary Care Provider and the dealership of choice to develop a service plan. The system was developed to minimize downtime for the customer and expedite truck servicing. 3 KW Rev. 12/15

Fault Code Indicators What the Driver Sees Stop Engine Immediately Seek Service Immediately Service Advised NOTE: These images only apply to T680 and T880.

The driver will see one of these dash indicators. Stop Engine Immediately Stop now, shut down the truck, and call for a tow if necessary.

Seek Service Immediately Conditions such as turbocharger faults, high fuel temperatures, ECU errors, low oil pressure, and aftertreatment faults result in this alert.

4 Fault Code Indicators What the Driver Sees Stop Engine Immediately Seek Service Immediately Service Advised NOTE: These images only apply to T680 and T880. The Peterbilt Kenworth SmartLINQ TruckTech+ communication process starts when an an engine or or aftertreatment system fault fault is is reported on a SmartLINQ TruckTech+ vehicle. The driver will see one of these dash indicators. Stop Engine Immediately Stop now, shut down the truck, and call for a tow if necessary. Faults that may call for this action include those that may cause damage to the engine. Examples include: low oil pressure, high oil temperature, and low fuel pressure. Seek Service Immediately Conditions such as turbocharger faults, high fuel temperatures, ECU errors, low oil pressure, and aftertreatment faults result in this alert. These faults may lead to a derate situation and/or possible damage to components. Some of these may be emissions-related, meaning the vehicle s emissions are not in compliance with EPA regulations. The appropriate action is to drive the vehicle to a nearby dealership. Service Advised Vehicle s engine or aftertreatment system performance is not as expected and while the onboard diagnostics system is monitoring the fault, it is safe to continue delivering the load. Get service at your next opportunity. DEF quality and minor ECU faults are among the codes that may trigger this action. What Happens When SmartLINQ TruckTech+ Takes Action SmartLINQ TruckTech+ immediately communicates with PACCAR s back office by wirelessly sending detailed data about the event. PACCAR s back office system translates the data into user friendly text and graphics, and generates PACCAR Solutions web portal and content. The truck s Primary Care Provider receives the notification and can go online to PACCAR Solutions to view the web portal content. If you are the owner or fleet manager who is the only recipient of the notification, you would then communicate with your preferred dealerships to generate a plan for when, where and how the truck will be serviced. At this point, either you or the dealership will contact the driver to provide direction on what to do next based on the severity of the event. Using the information from the notification and/or the PACCAR Solutions content, the dealership begins to troubleshoot and plan for the repair while the truck is en route. 4 KW Rev. 12/15

Vehicle Information Unit# VIN number Event# Fault Event Location Fault Information Description: Plain English Fault Count Recommended Action: Stop Now, Service Now, Service Soon or Informational

5 Vehicle Information Unit# VIN number Event# Fault Event Location Fault Information Description: Plain English Fault Count Recommended Action: Stop Now, Service Now, Service Soon or Informational Current State: Percent of engine power and potential derate Lamps: showing in truck Additional Information Notes for additional information Troubleshooting Guidance Possible causes and checks the driver may be able to perform. Service Centers The name, address, hours, phone, and distance to three of the closest Peterbilt Kenworth dealer locations. Location of Vehicle at Fault Occurrence Map with location of the truck at time of fault occurrence. Notes Informational and safety reminders are located at the end of the document (not shown). Sample Notification 5 KW Rev. 12/15

What to Do After the Email Notification After notification from the system, you can use the information from the email and the PACCAR Solutions web portal to do the following: 1.

6 What to Do After the Notification After notification from the system, you can use the information from the and the PACCAR Solutions web portal to do the following: 1. Identify the location of the vehicle and determine which of the three closest dealerships you want to contact. 2. Research the vehicle fault code details. 3. Have the driver perform any of the checks noted in the . This information better prepares you to work with a dealership to develop a repair estimate, communicate with the driver, and schedule an appointment. The primary benefit for both you and your fleet is that advance planning will make for a faster and more efficient repair. PACCAR Solutions Portal The web portal is accessed at It s a good idea to create a shortcut to the portal on the desktop of computers that will be used to access it. Also make sure that these computers have Internet Explorer 11.0, or an up-to-date version of Google Chrome or Firefox installed. PACCAR Solutions opens to the login screen shown below. Use the address and password (case sensitive) that you created when you set up your account. If you forget your password, clicking the Forgot password link will send a password reset to the address you provided. If you are unable to log in, please contact your dealership. 6 Rev. 12/15

What s on the Dashboard Show/Hide Menu Search User Options Navigation Menu Fleet Health Fleet Map The portal opens to the Dashboard, which you can think of as the system s home page.

7 What s on the Dashboard Show/Hide Menu Search User Options Navigation Menu Fleet Health Fleet Map The portal opens to the Dashboard, which you can think of as the system s home page. The contents of each page may change as you navigate through the portal, but the header remains constant throughout your experience. The Show/Hide Menu button expands or hides the Navigation Menu when clicked. The Search box lets you quickly search all content on the site. Clicking the User Options icon will display a drop down menu where you can change your profile and password. A Universal Filter tool is available in the Navigation Menu. It allows a user to focus the contents of the site to vehicles of interest (for more information see section on Vehicle Groups). The map has been designed to have a familiar feel to other web-based maps. Use the plus and minus bar to zoom in and out and the directional arrows to move a different area of the map into the viewing window. You can also grab the map with your mouse and move it. The icons in the bar at the top of the map let you manage the Fleet Map view. Use the circling arrows icon to to refresh the refresh data. the The data. crossed The crossed arrows icon arrows lets icon you toggle lets you between toggle between full screen full and screen the default and the map default view. map The view. globe The icon globe toggles icon toggles a satellite a satellite layer layer over over the map. the map. The roadway The roadway icon toggles icon toggles a traffic a traffic layer. layer. The cloud The cloud icon adds icon a adds weather a weather radar layer, radar and layer, the and truck the icon truck shows icon shows Peterbilt Kenworth dealer locations. dealer locations. The pie The chart pie icon chart will icon re-open will re-open the Fleet the Health Fleet Tool Health if it is hidden Tool if it while is hidden the map while is the in full map screen is in full view. screen view. 7 KW Rev. 12/15

How to Set a Preferred Dealer Click the crossed arrows (full view) and the truck icon from the Fleet Map s tool bar to display dealership locations on the fleet map.

Select a flag location you wish to set as a Preferred Dealer and a call out box will be displayed. It contains the dealership s contact Information and service type.

8 How to Set a Preferred Dealer Click the crossed arrows (full view) and the truck icon from the Fleet Map s tool bar to display dealership locations on the fleet map. Dealership locations are indicated by flag icons and Preferred Dealerships are represented by a blue circle with a star. Select a flag location you wish to set as a Preferred Dealer and a call out box will be displayed. It contains the dealership s contact Information and service type. Select the star icon to the left of the dealership name. The star icon will turn yellow when it is selected and the flag icon on the fleet map will change to a circle icon with a star in the middle indicating that it is a preferred dealership location. Note: Once a dealer location has been given Preferred Dealer status, portal users at that location will have visibility of your fleet. They will also be able to make administrative changes to your account. Please take this into consideration and communicate the change in status with the Dealership. 8 KW Rev. 12/15

The eye icon indicates which pins will appear on the map with the location(s) of the vehicle(s) in that category. If your vehicles are not showing on the map, please contact your dealership.

9 How to Get Vehicle Information The Fleet Health Table categorizes your fleet into groups as denoted by Recommendation. Each Recommendation Icon lets the user choose the visibility of chassis in the Fleet Map. The eye icon indicates which pins will appear on the map with the location(s) of the vehicle(s) in that category. If your vehicles are not showing on the map, please contact your dealership. If your vehicle pin has not moved in over an hour of vehicle run time, there may be a hardware issue on that truck. Selecting the box-and-arrow icon for one of the recommendation will display a list (not shown) of only the vehicles in that category. For a more detailed explanation of the vehicle s health, click on a pin on the map. An information box will pop up with the Unit# (if provided), VIN#, recommendations and last update for that vehicle. Click on the VIN# and the Recommendation (Service Now), Vehicle Information and Active Fault Codes are displayed. Click on an Active Fault Code. 9 KW Rev. 12/15

10 The Details section expands out to show finer detail about a fault code. Fault Information gives a description of the problem, a fault count, current state of the engine and any additional information. Troubleshooting Guidance shows the possible causes and a check mark will show if there are items the driver can check or perform to possibly avoid a service event. The Event Location section includes a snapshot of the map and a pin indicating where the vehicle was located at the time the event was reported. The Authorized Dealer for Repair section shows the three nearest authorized dealerships. Contact information, Hours of Operation, and approximate distance from the vehicle s location at time of the event are also included. The Shapshot Data section displays useful system information about your vehicle. Each event records 70 seconds of data; 60 seconds prior to the event and 10 seconds after. If the fault code generates an , a record of that can be found in the section. 10 Rev. 12/15

11 How to Get Dealership Information From any page, click on Dealers/Service Centers in the Navigation Menu panel. The Dealers/Service Centers tab opens and displays information about the dealership that set up your SmartLINQ TruckTech+ account. It lists the name, address, phone/fax numbers, and address of that dealership. Click the Dealership Name and a satellite view map will display with the dealership property highlighted in red. Any vehicles that are on a dealership property will be grouped in the In Repair Recommendation of the Fleet Health Tool. 11 KW Rev. 12/15

Creating and Managing Vehicle Groups In the case that your fleet is very large, Vehicle Groups are a powerful tool to quickly filter the vehicles to a more manageable subset.

12 Creating and Managing Vehicle Groups In the case that your fleet is very large, Vehicle Groups are a powerful tool to quickly filter the vehicles to a more manageable subset. The ability to add and edit Vehicle Groups is limited to the Customer Administrator role. Creating a Vehicle Group Select Customers on the Navigation Menu. Click the Customer Name on the list. Click the + button to create a new custom Vehicle Group. Enter a name for the Vehicle Group you wish to create in the text field. Click the check button to create the vehicle group. Continue on to the next section to assign vehicles to the newly created Vehicle Group. 12 Rev. 12/15

The search field can quickly find vehicles in either list. VIN, vehicle number, and vehicle description are searchable fields.

13 Managing Vehicle Groups Select the gray edit button next to the Vehicle group you wish to edit. The Vehicle Group tab opens with two columns: Available Vehicles and Vehicles In Group. The search field can quickly find vehicles in either list. VIN, vehicle number, and vehicle description are searchable fields. To add vehicles to a group, click on the green arrow button of any vehicle in the Available Vehicles column. To remove vehicles from a group, click on the green arrow button of any vehicle in the Vehicles In Group column. ADD REMOVE 13 Rev. 12/15

14 How to Add Users User management is restricted to users in a Customer Administrator role. Click on Users in the left Navigation Menu. Click on +new. This will open the add User screen. Fill in required Account information: First name, Last name, and Phone. 14 Rev. 12/15

Define the new user s role from the Roles drop down menu. Customer Administrator: Customer Management. This role has read/write access. Its primary role is to manage User Accounts, and Vehicle Groups.

15 Define the new user s role from the Roles drop down menu. Customer Administrator: Customer Management. This role has read/write access. Its primary role is to manage User Accounts, and Vehicle Groups. It can also subscribe to Vehicle Groups and receive ed fault notifications. Customer User: View Only. This role has read only access. It can subscribe to Vehicle Groups and receive ed fault notifications. Set the user Notifications by checking the box next to the notification type. All: the user will receive all available ed fault notifications as they occur. Derate Active/Warning: the user will receive all available Derate Active and Warning related s. Derate Active: the user will receive all available Derate Active related s. None: the user will not receive any fault notification s. Save changes. PACCAR Solutions will send an to the new user to set-up their password. The password must contain 8-24 characters with at least one capitalized letter and one number and is case sensitive. 15 Rev. 12/15

16 How to Edit Users A Customer User can only edit his/her own profile. Customer Administrators can edit all users including other Administrators. Navigate to the Users page from the left Navigation Menu. Find the account to edit and click on the Pencil icon at the right of their name. This list is alphabetized by last name. Make the desired modifications and Save. 16 Rev. 12/15

This part of the process lets the user determine the severity of emails that will be transmitted. This can also be thought of as a filter to control email volume. Save any changes.

17 How to Subscribe to Notifications A Customer User can only subscribe to existing Vehicle Groups. Customer Administrators can subscribe to, create, and edit Vehicle Groups. Click on the User Options icon and select User Profile. Under Options, chose an Notifications option greater than None. This part of the process lets the user determine the severity of s that will be transmitted. This can also be thought of as a filter to control volume. Save any changes. Select Customers on the Navigation Menu. Select your company. Subscribe to the desired Vehicle Groups. Subscribing to All allows the user to receive s from all vehicles in the fleet. Subscribing to a custom Vehicle Group limits to only the chassis defined in that group. 17 Rev. 12/15

18 Frequently Asked Questions Can I delete a user from PACCAR Solutions? A User cannot be deleted. A user can be edited and made inactive by unchecking the Active box underneath the notifications section and saving the changes. Inactive users will be removed from the system after 150 days How do I edit truck information? Vehicle information is edited by using the following process. Select the left Options List Icon to reveal the left hand menu options. Select the Vehicles menu option. Select the pencil icon next to the vehicle in the list. Why am I getting so many notifications? If a user is set up to receive All, Derate Active/Warning, or Derate Active notifications, that user will receive the respective type of notification that is set for all vehicles in the fleet. You can also create Vehicle Groups to limit the number of vehicles you want to receive notifications for. Why am I not getting more notifications? A user may choose to only receive Derate Active/ Warning and Derate Active notifications. If a user is not receiving the notifications they expect to see, confirm that the user is set up to receive the proper notifications or all notifications. Who should get notifications? Anyone in the fleet or at your preferred dealership who would want to know if a truck has a critical fault generated, should be set up to receive notifications. How can notification settings be changed? To change the notification settings for a user, you will need to edit the user in the PACCAR Solutions Portal. The notification settings are found in the Options section of the user information screen. How are forgotten passwords handled? If you forget your password, click the Forgot password link on the PACCAR Solutions login page, and the system will send a password reset to the address you provided. Why are trucks not visible on the map? Be sure that the visibility filters have been turned on. If that doesn t solve the issue, contact the selling dealer for that vehicle for further assistance. 18 KW Rev. 12/15

Table of Contents. How SmartLINQ Works Fault Code Indicators What the Driver Sees Sample Notification... 5

Table of Contents. How SmartLINQ Works Fault Code Indicators What the Driver Sees Sample Notification... 5 Table of Contents Peterbilt SmartLINQ Manual How SmartLINQ Works... 3 Fault Code Indicators What the Driver Sees... 4 Sample Email Notification... 5 What to Do After the Email Notification... 6 PACCAR