IDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41

Transcription

1 IDC for mil(1.27mm) Falt Cable with Oe-touch Lockig Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41

2 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil) FC FETURES IDC for 1.27mm (mil) flat cable (#28 WG) Highly reliable straight beam cotact desig Low isertio d withdrawal force Easy to operate Oe-Touch lockig ejector system C be used with MIL-STD type IDC coectors (KEL 6100, 6200, 6200S, 6230 Series for example) 13 sizes, from 20 to 100 pis RoHS complice ORDER CODE 88 E F F : RoHS Complice Platig of cotact area Omit : u 0.05 m (Stdard) D : u 0.25 m (Upo request) Cotact tail style (Plug oly) S : Straight L : Right gle Cotact ame 170 : Plug 171 : Receptacle Number of cotacts 020 : 20 pi 026 : 26 pi 030 : 30 pi 032 : 32 pi 034 : 34 pi 036 : 36 pi 040 : 40 pi 0 : pi 052 : 52 pi 0 : pi 068 : 68 pi 0 : pi 100 : 100 pi Series ame 8822E : Receptacle 8830E : Plug, Without hooks 8831E : Plug, With hooks (Right gle oly) SPECIFICTIONS Isulator : Glass-filled 66 Nylo (UL 94V-0), lack Cotact : Copper alloy Platig : Cotact area ; Gold over Nickel (1) Stdard : 0.05 m mi. Gold (2) Upo request : 0.25 m mi. Gold IDC area ; 0.05 m mi. Gold over Nickel (8822E) Termial area ; 2 m mi. Ti copper over Nickel (8830E/8831E) Curret ratig : 0.5 per cotact Cotact resistce : 30mΩ max. Dielectric withstdig voltage : 6V C for 1 miute Isulatio resistce :1,000MΩ mi. at 0V DC Operatig temperature : -55 C to +85 C Recommeded cable : #28 WG (7/0.127), 1.27mm (mil) pitch, Flat ribbo cable 8822E Series lockig ejector system The 8822E Series lockig ejector system is a reversal of the MIL-STD desig (KEL 6200 Series), the lockig ejectors are itegral to the cable coector. The ejectors are automatically locked by isertio i the Plug coector like the MIL-STD desig. The latches remai withi the coector outlie to reduce the requiremets for board space, are ulocked by applyig iward pressure d c be operated with oly oe hd ulike the older desigs. This desig offers advtages for uses i today s high desity electroic equipmet. Way to isert Ope the ejectors of 8822E Series d isert ito 8830E/8831E Series util the latches fully egage. PUSH Way to withdrawal Press o both sides of the 8822E Series ejectors to release the coector from the Plug coector. PICK PICK CLOSE CLOSE (Locked positio) C-42

3 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil) FC 8822E F (Receptacle, With lockig ejector) Receptacle (IDC Type) Uit:mm(ich) X- Cross Sectio Latches must be ope for matig JPN XXX Ref. 8.9 (0.3) 9.2(0.362) 7.3(0.287) 4.8(0.189) 6.6 (0.2) 8.4 (0.331) X9071 Polarity idetificatio C Ref. 3.2 (0.126) 3.65 (0.144) Ref. 0.4 (0.016) 12.7(0.0) Ref. 0.3(0.012) 21.6(0.8) 1.27(0.0) pitch 1 3 D X "" is umber of cotacts E F 8822E F 8822E F 8822E F 8822E F 8822E F 8822E F 8822E F 8822E F 8822E F 8822E F 8822E F Other Product Table / Dimesios No.of cotacts Part Number C D Number of packagig E F (1.096) (0.702) (0.7) (0.4) (1.246) (1.346) (1.396) (1.446) (1.496) (1.596) (1.846) (1.896) (2.096) (2.296) (2.596) (3.096) (0.852) (0.952) (1.002) (1.052) (1.102) (1.202) (1.452) (1.2) (1.702) (1.902) (2.202) (2.702) (0.757) (0.857) (0.907) (0.957) (1.007) (1.107) (1.357) (1.407) (1.7) (1.7) (2.107) (2.7) (0.0) (0.700) (0.7) (0.0) (0.8) (0.9) (1.200) (1.2) (1.4) (1.6) (1.9) (2.4) Packagig style C-43

4 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil) FC 8830E- -170S -F (Plug, With lockig ejector) Plug (Straight Type) Uit:mm(ich) X- Cross Sectio 1.75(0.069) 9.7(0.382) 1(0.039) 7.3(0.287) 3(0.118) 7(0.276) 6.6(0.2) 5(0.197) Ref (0.225) Ref. 0.4 (0.016) 3.65(0.144) 0.4(0.016) Polarity idetificatio 1.27(0.0) pitch C D X 2-2.3( ) 3.7 (0.146) 3.3(0.130) 2-2.3±0.1 ( ±0.004) 3.7 (0.146)3.3(0.130) 2-2.3±0.1 ( ±0.004) Prited Circuit oard Layout (Compoet Side View) For 20,32,36,40,52,,68,,100 cotacts Coector Outlie mi.( mi.) ±0.05 (0.0±0.002) D±0.1(D±0.004) ±0.15(±0.006) For 26,30,34, cotacts Coector Outlie mi.( mi.) ± (0.0±0.002) D±0.1(D±0.004) ±0.15(±0.006) Recommeded PC Thickess t=1.6±0.19(0.063±0.007) is umber of cotacts ±0.05 (0.225±0.002) 5.715±0.05 (0.225±0.002) Product Table / Dimesios 3.8(0.1) 1.4(0.055) No.of cotacts Part Number C D E S -F (1.096) (0.900) (0.623) E S -F (1.246) (1.0) (0.773) E S -F (1.346) (1.1) (0.873) E S -F (1.396) (1.200) (0.923) E S -F (1.446) (1.2) (0.973) E S -F (1.496) (1.300) (1.023) E S -F (1.596) (1.400) (1.123) E-0-170S -F (1.846) (1.6) (1.373) E S -F (1.896) (1.700) (1.423) E-0-170S -F (2.096) (1.900) (1.623) E S -F (2.296) (2.100) (1.823) E-0-170S -F (2.596) (2.400) (2.123) E S -F (3.096) (2.900) (2.623) (0.4) (0.0) (0.700) (0.7) (0.0) (0.8) (0.9) (1.200) (1.2) (1.4) (1.6) (1.9) (2.4) Packagig style Pipe Number of packagig C-44

5 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil) FC 8830E/8831E- -170L -F (Plug, With lockig system) Plug (Right gle Type) Uit:mm(ich) 8830E- -170L -F X- Cross Sectio 2.6(0.102) 8831E- -170L -F 3(0.118) 4.6(0.181) 1.75(0.069) 7(0.276) 6.6(0.2) 5(0.197) 9.7(0.382) 7.7(0.303) 7.3(0.287) 2.905(0.114) Ceter of the 1(0.039) moutig hole 3(0.118) 2-2.3( ) Polarity idetificatio Ref. 0.4(0.016) 3.65(0.144) Ref (0.225) 0.4(0.016) C D 1.27(0.0) pitch X 2-2.3±0.1 ( ±0.004) 2-2.3±0.1 ( ±0.004) Prited Circuit oard Layout (Compoet Side View) 4.8(0.189) 1.7(0.067) 12.6 (0.496) 3.65 (0.144) 4.8(0.189) 1.7(0.067) 12.6 (0.496) For 20,32,36,40,52,,68,,100 cotacts Coector Outlie mi.( mi.) ±0.15(±0.006) For 26,30,34, cotacts Coector Outlie mi.( mi.) ±0.15(±0.006) Recommeded PC Thickess t=1.6±0.19(0.063±0.007) is umber of cotacts (0.144) ±0.05(0.0±0.002) D±0.1(D±0.004) 1.27±0.05(0.0±0.002) D±0.1(D±0.004) ±0.05 (0.1±0.002) 8.5 (0.335 max.) PC edge 3.81±0.05 (0.1±0.002) 8.5 (0.335 max.) PC edge Product Table / Dimesios No.of cotacts Part Number C D (1.096) (0.900) (0.623) (0.4) E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E-0-170L -F 8831E-0-170L -F 8830E L -F 8831E L -F 8830E-0-170L -F 8831E-0-170L -F 8830E L -F 8831E L -F 8830E-0-170L -F 8831E-0-170L -F 8830E L -F 8831E L -F (1.246) (1.346) (1.396) (1.446) (1.496) (1.596) (1.846) (1.896) (2.096) (2.296) (2.596) (3.096) (1.0) (1.1) (1.200) (1.2) (1.300) (1.400) (1.6) (1.700) (1.900) (2.100).96 (2.400) (2.900) (0.773) (0.873) (0.923) (0.973) (1.023) (1.123) (1.373) (1.423) (1.623) (1.823) (2.123) (2.623) (0.0) (0.700) (0.7) (0.0) (0.8) (0.9) (1.200) (1.2) (1.4) (1.6) (1.9) (2.4) Packagig style Pipe Number of packagig C-45

6 CLE SSEMLY / PIN SSIGNMENT ORDER CODE 8822E F E F- -C 8822E 171 F (C) No.1 No. of cotacts 020 : 20 pi 026 : 26 pi 030 : 30 pi 032 : 32 pi 034 : 34 pi 036 : 36 pi 040 : 40 pi 0 : pi 052 : 52 pi 0 : pi 068 : 68 pi 0 : pi 100 : 100 pi Cable type Omit : Flat cable * S : Itermittet boded cable T : Twist&Flat cable * Wirig code (, C,, D, O, CO) Cable legth (cm) L dimesio (3cm mi.) (Example: 008=8cm) F : RoHS Complice Cotact ame 171 Platig of cotact area Omit : u 0.05 m (Stdard) D : u 0.25 m (Upo request) Series ame 8822E : Oe-touch lockig ejector system 8822E F- -O -wired products Omit : Twist type C : Through type / No. 1 2 / No. 2 b2 / No. / No. 1 2 / No. 2 a2 / No. / No. 1 2 / No. 2-1 / No. / No. 1 2 / No. 2-1 / No. No. 1 No. / No. 1 2 / No. 2 / No. / No. 1 2 / No. 2 / No. ( Polarity mark) ( Polarity mark) 2 2 a2 b2 ( Polarity mark) for 26, 30, 34, pis E F- -CO No. -1 Cable, 68,, 100 pis -1-1 for 26, 30, 34, pis Cable, 68,, 100 pis b2 a2 ( Polarity mark) No (Compoet side view) for 26, 30, 34, pis (Compoet side view) / No. 2 / No. -1 / No. 1 / No. 2 / No. -1 / No. 1 2 b2 2 a * Itermittet boded d Twist&Flat cable have a restrictio o cable legth (L dimesio) because they are termiated at the fused part. For O d CO codes, orders are accepted i eve qutities. Haress ed has extra cable of approximate 1mm beyod the coector edge. C-46

7 CLE SSEMLY / PIN SSIGNMENT 8822E F E F- --C 8822E F- -D (Twist type) (Twist type) L(cm) L(cm) L(cm) / No. 1 2 / No. 2 a2 / No. 1 2 / No. 2 a2 / No. 1 2 / No. 2 a2 / No. / No. 1 2 / No. 2 b2 / No. / No. / No. 1 2 / No. 2 b2 / No. / No. / No. 1 2 / No. 2 b2 / No. ( Polarity mark) ( Polarity mark) 2 2 a2 b2 ( Polarity mark) ( Polarity mark) 2 2 a2 b2 ( Polarity mark) for 26, 30, 34, pis F.C., 68,, 100 pis -1 for 26, 30, 34, pis F.C., 68,, 100 pis -1 for 26, 30, 34, pis F.C., 68,, 100 pis -1 b2 for 26, 30, 34, pis -1 a2 ( Polarity mark) * 2 a2 2 b2 2 a2 2 b2 Itermittet boded d Twist&Flat cable have a restrictio o cable legth (L dimesio) because they are termiated at the fused part. For O d CO codes, orders are accepted i eve qutities. Haress ed has extra cable of approximate 1mm beyod the coector edge. 2 a2 2 b2 C-47

8 X 8822E/8830E/8831E SERIES DUST COVER / TERMINL EQUIPMENT Material : PVC Color : Semi-trsparet X- Cross Sectio 7.1(0.2) 5.5(0.217) 5(0.197) 80 Series Dust Cover 80- DSC-R1 (For Receptacle) DSC-H1 (For Plug) Uit:mm(ich) Dimesios 0.8 (0.031) 7.8(0.307) X Material : PVC Color : Semi-trsparet 3(0.118) X- Cross Sectio 8.2(0.323) 7.2(0.283) 0.8 (0.031) 6.8(0.268) No.of cotacts (0.685) 14.03(0.552) 21.2(0.835) 17.84(0.702) 23.8(0.937) 20.38(0.2) 25.0(0.984) 21.65(0.852) 26.3(1.035) 22.92(0.902) 30.1(1.185) 26.73(1.052) 36.5(1.437) 33.08(1.302) 37.7(1.484) 34.35(1.352) 42.8(1.685) 39.43(1.552) 47.9(1.886) 44.51(1.752) 55.5(2.185) 52.13(2.052) 68.2(2.685) 64.83(2.552) Termiatio Equipmet Hd Press(HP-12) Cable Trimmer(CT-15) Locatig Fixture(LF-21) Seatig Plate Specificatios d dimesios are subject to chge without otice. LF-21 accessory * C-48