1. Basic safety information 4 2. Proper use 4

Transcription

1 EN Time switch TR 611 top TR 622 top Basic safety information 4 2. Proper se 4 Disposal 4 3. Installation and connection 5 Monting the time switch 5 Connecting the cable 7 Disconnecting the cable 7 4. Device description 8 Display & bttons 8 Operating instrctions 9 1

2 Overview of navigation men 10 Initial operation Settings and fnctions 12 Set switching time 12 Change switching times 14 Delete switching program 15 Plse programming 16 Cycle programming 17 Setting holiday fnction 20 Activating PIN code 20 Setting manal or permanent switching 21 Set external inpt 23 Hor conter 24 Using the OBELISK top2 memory card 24 Resetting the time switch 26 2

3 6. Technical data Contact 28 3

4 1. Basic safety information! WARNING Danger of death throgh electric shock or fire! ¾Installation shold only be carried ot by a qalified electrician! The device is designed for installation on DIN top hat rails (in accordance with EN 60715) The device corresponds to type 1 STU in accordance with IEC/EN Power reserve (10 years) is redced if memory card is inserted (sing battery power)! OBELISK top2 memory card: Avoid mechanical overload and contamination dring storage/transportation 2. Proper se!! The time switch is sed for lighting, ventilation and flshing applications etc. Only for se in closed, dry rooms Do not se on safety devices, e.g. escape rote doors, fire safety eqipment etc. Disposal ¾Dispose of device in environmentally sond manner 4

5 3. Installation and connection Monting the time switch WARNING Danger of death throgh electric shock or fire! ¾Installation shold only be carried ot by a qalified electrician! click 5

6 45 cable Load line connection Plg-in screwless terminal NC contact Test tap OBELISK top2 memory card ( ) ¾Mont on DIN top hat rails (as defined in EN 60715) ¾Switched voltage-free ¾Ensre device cannot be switched on ¾Check absence of voltage ¾Earth and bypass ¾Cover or shield any adjacent live components 6

7 Connecting the cable Wiring diagrams / Ext1 L N L C2 max. 100 m C max. 100 m max. 100 m Ext1Ext2 C N N LL N L L ¾Strip cable to 8 mm (max. 9) ¾Insert cable in the open DoFix plg-in terminal at 45 LL2 cables per terminal position possible ¾To open the DoFix plg-in terminal, press screwdriver downwards Disconnecting the cable ¾ Use the screwdriver to psh the load line connection opener downwards 7

8 4. Device description Display & bttons Programmed switching times Date display Time display Channel stats C1, C2 ON = On OFF = Off Display of the active bttons with the relevant fnction Days of the week from 1 to 7 MENU MENU OK OK Activate display Open men Cancel men ESC (leave men) Options are displayed Save selection Confirm selection 8

9 Operating instrctions 1. Read text line text/symbol represents qery 2. Make a decision YES Confirmation Press OK NO Modify/ Change Press t 9

10 Overview of navigation men MENU PROGRAM TIME/DATE MANUAL NEW CHECK MODIFY DELETE END TIME SET DATE SU--WI WEEK DAY FORM DATE FORM TIME END CHANNEL C1 PERM ON PERM OFF OVERRI ON TIMER HOLIDAY RANDOM END OPTIONS END OPERATING HOUR EXT INPUT LCD ILLU- MINATION LANGUAGE PIN FACTORY SETTING INFO END 10

11 Initial operation MENU GERMAN RETAIN PROGRAM FORM DATE FRENCH ITALIAN DELETE PROGRAM YEAR MONTH DUTCH DAY FORM TIME HOUR MINUTE SU-WI EUROPE END ¾Set langage, contry, town/city, date, time as well as smmer/winter time (SU-WI) ¾Press any btton and display follows on screen (see figre) 11

12 5. Settings and fnctions Set switching time MENU PROGRAM NEW SWITCH PULSE CYCLE CHECK MODIFY DELETE END CHANNEL C1 MEM FREE 84 ON HOUR MINUTE MONDAY same switching time for several days = block COPY ADD TUESDAY SAVE Switching time for one day SAVE LLA switching time always consists of a start time and an end time LLThere are 84 memory cells available Example: Switch on sports hall lighting from Mon Fri, 7:30 to 12:00 hrs 12

13 ¾Press MENU ¾Select PROGRAM and press OK to confirm ¾Select NEW and press OK to confirm ¾Select SWITCH, confirm by pressing OK ¾Select CHANNEL C1 or C2, confirm with OK ¾Select ON (for trn-on times), confirm with OK ¾Set reqired trn-on time (Mo Fr, 7:30), confirm with OK ¾Select COPY, confirm with OK ¾ADD TUESDAY is displayed, confirm by pressing OK and also confirm the days We, Th, Fr by pressing OK. ¾Contine with ntil SAVE is displayed. ¾Confirm by pressing OK. Repeat all steps for the trn-off time, however instead of selecting ON with select OFF and enter 12:00 for hor and minte. 13

14 Change switching times MENU PROGRAM NEW CHECK MODIFY DELETE SWITCH CHANNEL C1 MONDAY MODIFY HOUR MODIFY MINUTE MODIFY BLOCK MODIFY SINGLE DAY LLYo can either change or delete a block, i.e. a switching time copied for several days (e.g. Mon-Fri) or a single switching time Change individal switching times ¾Press MENU ¾Select PROGRAM and press OK to confirm ¾Select CHANGE, confirm by pressing OK ¾Select SWITCH, confirm by pressing OK ¾Select CHANNEL C1 or C2, confirm with OK ¾Select day, confirm with OK ¾MODIFY HOUR, se the + or bttons to change hor and minte and confirm with OK. ¾To change several switching times, select MODIFY BLOCK, confirm with OK 14

15 Delete switching program MENU PROGRAM NEW CHECK MODIFY DELETE SWITCH CHANNEL C1 MONDAY DELETE BLOCK DELETE SINGLE DAY LLYo can either delete a block, i.e. a switching time copied for several days (e.g. Mon-Fri) or a single switching time ¾Press MENU. ¾Select PROGRAM and confirm with OK ¾Select DELETE, confirm with OK ¾Select SWITCH, confirm with OK ¾MONDAY is displayed, confirm with OK ¾Select DELETE BLOCK, confirm with OK ¾With DELETE MONDAY etc. individal days can also be cleared. 15

16 Plse programming MENU PROGRAM NEW SWITCH PULSE CHECK MODIFY CHANNEL C1 MEM FREE 84 ON C1 ON DELETE END HOUR MINUTE SECONDS PULSE LENGTH MINUTE SECONDS MONDAY COPY SAVE... Example: Switch on pase signal on Monday 8:05 hrs for 5 sec 16

17 ¾Press MENU ¾Select PROGRAM, confirm with OK ¾Select NEW, confirm with OK ¾With select PULSE, confirm with OK ¾Select CHANNEL C1 or C2, confirm with OK ¾Select ON, confirm with OK ¾Use the + or bttons to enter hor, minte, second (8:05) and confirm with OK ¾Use the + or bttons to enter the dration of the plse in mintes and seconds (5 sec) and confirm with OK. MONDAY is displayed. ¾Select day, confirm with OK ¾Select COPY or SAVE ¾To save press and confirm with OK ¾To copy press OK Cycle programming In addition to trn-on and trn-off times (switching time) and short time plses (plse) cycle times (cycle) can also be programmed. The plse dration (+ plse pase) is limited to 17 hrs, 59 min, 59 sec LLCycle times refers to cyclically repetitive time fnctions sch as fan controls, rinal rinses etc. Example: Switch on water rinsing Monday from 8:00 to 20:30 hrs every 15 min for 20 sec (8:00:00 8:00:20 On; 8:15:00 8:15:20 On; 8:30:00 8:30:20 On etc.) Cycle programming: Start cycle: Monday 8:00 hrs Plse dration: 20 s Pase dration (pase): 14 min and 40 s End cycle: Monday 20:30 hrs 17

18 LLObserve the nmber of maximm electrical switching cycles when sing the cycle fnction. MENU PROGRAM NEW CYCLE CHANNEL C1 CHECK MEM FREE 84 MODIFY START CYCLE DELETE END HOUR MINUTE MONDAY PULSE LENGTH PAUSE WITH END STOP CYCLE ENDLESS... 18

19 ¾Press MENU ¾Select PROGRAM, confirm with OK ¾Select NEW, confirm with OK ¾With select CYCLE, confirm with OK ¾Select CHANNEL C1 or C2, confirm with OK ¾START CYCLE is displayed, confirm with OK ¾Use the + or bttons to enter hor, minte, day (8:00 hrs Monday) and confirm with OK ¾Enter PULSE LENGTH (20 s), confirm with OK ¾Enter pase dration PAUSE (14 min and 40 s), confirm with OK ¾Select WITH END, confirm with OK ¾STOP CYCLE is displayed, confirm with OK ¾Enter end times of the cycle (20:30 hrs) and confirm with OK 19

20 Setting holiday fnction MENU MANUAL CHANNEL C1 PERM ON PERM OFF OVERRI ON TIMER HOLIDAY RANDOM END ON BEGINN HOLIDAY END HOLIDAY ¾Press MENU ¾Select MANUAL and press OK to confirm ¾Select CHANNEL C1 or C2, confirm with OK ¾Select HOLIDAY and press OK to confirm ¾Select ON and press OK to confirm ¾Select START HOLIDAY and press OK to confirm ¾Enter YEAR, MONTH, DAY, HOUR and press OK to confirm ¾Select END HOLIDAY and press OK to confirm ¾Enter YEAR, MONTH, DAY, HOUR and press OK to confirm Activating PIN code The PIN code is set in OPTIONS via the men. 20

21 LLIf yo have forgotten yor PIN, call the Theben Hotline. LLHave the serial nmber ready MENU OPTIONS OPERATING HOURS EXT INPUT LCD ILLU- MINATION LANGUAGE PIN FACTORY SETTING INFO END NO PIN WITH PIN CURRENT PIN NEW PIN Setting manal or permanent switching Manal or permanent switching can be set via the men in MANUAL or (in the atomatic screen) by btton combination (see pictre). Manal control: Reversing the channel stats to the next atomatic or programmed switching. Permanent switching: As long as a permanent switching (on or off) is activated, the programmed switching times are ineffective 21

22 ok Chanel C1 Chanel C2 Activating manal control ¾Briefly press both bttons simltaneosly Activating permanent switching ¾Press both bttons simltaneosly for 2 seconds Cancelling manal/permanent switching ¾Press both bttons simltaneosly 22

23 Set external inpt For the channel, an EXTERNAL INPUT (see figre) can be set with different fnctions. 3 sb-mens can be selected: Inactive, psh btton (fnction), switch (fnction) INACTIVE: The external inpt has no fnction PUSH BUTTON: Manal (manal control), Timer (contdown timer) are selectable SWITCH: Permanent On, permanent Off are selectable LLIf a fnction is activated via an external psh btton or switch, EXTERNAL is displayed. MENU OPTIONS OPERATING HOURS EXTERNAL OUTPUT LCD ILLU- MINATION LANGUAGE PIN FACTORY SETTING INFO CHANNEL C1 BUTTON SWITCH NOT ACTIVE OVERRIDE TIMER ¾ Press MENU, with select EXT INPUT and follow the indications on the display. 23

24 Hor conter The operating hors of the channel (relay) are displayed and deleted in the OPTIONS men. If the nmber of operating hors exceeds the vale set in the Service men, SERVICE will appear in the display. Example: Replace a lamp after after 5,000 h. ¾Delete operating hors or set a higher vale in Service (e.g. to 10,000 h) Using the OBELISK top2 memory card All fnctions can also be set on the PC sing the OBELISK software and transferred to the device via the memory card. ¾Insert memory card in the time switch ¾Read in/ot saved switching times and device setps in the time switch or start Obelisk program ¾Remove memory card after copying etc.!! Avoid mechanical overload and contamination dring storage/transport LLPC software OBELISK top2 available at 24

25 Copying OBELISK TIME This copies the switching program and optionally all time switch settings (e.g. external inpt, time format etc.) from the memory card in the time switch. Copying TIME OBELISK This copies all switch programmes and settings from the time switch to the memory card. Starting OBELISK program Takes on the switching times that are programmed on the memory card. As soon as the memory card is removed, the switching times of the time switch are re-activated. 25

26 OBELISK COPY OBELISK -> TSWI OVERWRITE OK COPY TSWI RUN -> OBELISK OBELISK OVERWRITE OK CHECK OBELISK Resetting the time switch ¾Press the 4 bttons simltaneosly Yo can choose between KEEP PROGRAM and DELETE PROGRAM 26

27 6. Technical data Operating voltage: V AC +10 % / 15 % Freqency: Hz Power consmption TR 611/622: max. 0,84/1,13 W Max switching capacity: 16 A (at 250 V, cos ϕ = 1) switching capacity: 10 A (at 250 V, cos ϕ = 0,6) Min. switching capacity: 10 ma/230 V AC 100 ma/ 24 V AC/DC Shortest switching time: 1 second Protection rating: IP 20 in accordance with EN Protection class: II in accordance with EN sbject to designated installation Operating temperatre: 30 C +55 C Power reserve: 10 years at +20 C Time accracy: ±0,25 s/day (25 C) Rated implse withstand voltage: 4 kv Polltion degree: 2 Contact: two way switch Glow lamp load: 2600 W Halogen lamp load: 2600 W Florescent lamp load: ncorrected Series corrected: 2300 VA parallel-corrected: 730 VA (80 µf) 27

28 Halogen Metalldampflampen: 2 x 250 W (32µF), 4 x 150 W (20 µf), 5 x 100 W (16 µf), 6 x 70 W (12µF) Compact florescent tbes (EVG): 170 W LED lamps (<2 W): 30 W LED lamps (>2 W < 8 W): 100 W SELV switching is not permitted. Switching of any external condctor is permitted. 7. Contact Theben AG Hohenbergstr Haigerloch GERMANY Tel Fax Hotline Tel hotline@theben.de Addresses, telephone nmbers etc. 28