1. Basic safety information 3 2. Proper use 3

Transcription

1 C2 0,5mm 2-2,5mm 2 8mm V~ 50-60Hz R 10a -30T 0,5mm 2-2,5mm 2 8mm V~ 50-60Hz R 10a -30T EN Time switch DV1K DV2K MENU OK 1 C1 16(10)A 250V~ C MENU OK 1 2 C1/C2 16(10)A 250V~ C Basic safety information 3 2. Proper se 3 Disposal 3 3. Installation and connection 4 Monting the time switch 4 Connecting the cable 6 Disconnecting the cable 6 4. Device description 7 Display & bttons 7 Operating instrctions 8 Overview of navigation men 9 1

2 Initial operation Settings and fnctions 11 Set switching time 11 Change switching times 12 Delete switching program 13 Activating PIN code 14 Setting manal or permanent switching 15 Hor conter 15 Using the memory card 16 Resetting the time switch Technical data Contact 19 2

3 1. Basic safety information! WARNING Danger of death throgh electric shock or fire! ¾Installation shold only be carried ot by a qalified electrician! The device is designed for installation on DIN top hat rails (in accordance with EN 60715) The device corresponds to type 1 STU in accordance with IEC/EN Power reserve (10 years) is redced if memory card is inserted (sing battery power)! Memory card: Avoid mechanical overload and contamination dring storage/transportation 2. Proper se!! The time switch is sed for lighting, ventilation and flshing applications etc. Only for se in closed, dry rooms Do not se on safety devices, e.g. escape rote doors, fire safety eqipment etc. Disposal ¾Dispose of device in environmentally sond manner 3

4 3. Installation and connection Monting the time switch WARNING Danger of death throgh electric shock or fire! ¾Installation shold only be carried ot by a qalified electrician! clic 4

5 45 cable Load line connection Plg-in screwless terminal NC contact Test tap Memory card ¾Mont on DIN top hat rails (as defined in EN 60715) ¾Switched voltage-free ¾Ensre device cannot be switched on ¾Check absence of voltage ¾Earth and bypass ¾Cover or shield any adjacent live components 5

6 Connecting the cable Wiring diagrams DV1K / DV2 K L N L C2 C C N N L L N L L ¾Strip cable to 8 mm (max. 9) ¾Insert cable in the open DoFix plg-in terminal at 45 LL2 cables per terminal position possible ¾To open the DoFix plg-in terminal, press screwdriver downwards Disconnecting the cable ¾ Use the screwdriver to psh the load line connection opener downwards 6

7 4. Device description Display & bttons Programmed switching times Date display Time display Channel stats C1, C2 ON = On OFF = Off Display of the active bttons with the relevant fnction Days of the week from 1 to MENU MENU OK OK Activate display Open men Cancel men ESC (leave men) + Options are displayed Save selection Confirm selection 7

8 Operating instrctions 1. Read text line text/symbol represents qery 2. Make a decision YES Confirmation Press OK NO Modify/ Change Press t 8

9 Overview of navigation men MENU PROGRAM TIME/DATE MANUAL NEW CHECK MODIFY DELETE END TIME SET DATE SU--WI WEEK DAY FORM DATE FORM TIME CHANNEL C1 PERM ON PERM OFF OVERR ON HOLIDAY END END OPTIONS END OPERATING HOUR LCD ILLU- MINATION LANGUAGE PIN FACTORY SETTING INFO END 9

10 Initial operation MENU ENGLISH RETAIN PROGRAM FORM DATE POLSKI SUOMI DELETE PROGRAM YEAR MONTH SVENSKA DAY FORM TIME HOUR MINUTE SU-WI EUROPE END ¾Set langage, contry, town/city, date, time as well as smmer/winter time (SU-WI) ¾Press any btton and display follows on screen (see figre) 10

11 5. Settings and fnctions Set switching time MENU PROGRAM NEW CHANNEL C1 CHECK MODIFY DELETE END MEM FREE 56 ON HOUR MINUTE MONDAY same switching time for several days = block COPY ADD TUESDAY SAVE Switching time for one day SAVE LLA switching time always consists of a start time and an end time LLThere are 56 memory cells available Example: Switch on sports hall lighting from Mon Fri, 7:30 to 12:00 hrs 11

12 ¾Press MENU ¾Select PROGRAM and press OK to confirm ¾Select NEW and press OK to confirm ¾Select CHANNEL C1 or C2, confirm with OK ¾Select ON (for trn-on times), confirm with OK ¾Set reqired trn-on time (Mo Fr, 7:30), confirm with OK ¾Select COPY, confirm with OK ¾ADD TUESDAY is displayed, confirm by pressing OK and also confirm the days We, Th, Fr by pressing OK ¾Contine with ntil SAVE is displayed ¾Confirm by pressing OK Repeat all steps for the trn-off time, however instead of selecting ON with select OFF and enter 12:00 for hor and minte. Change switching times MENU PROGRAM NEW CHECK MODIFY DELETE CHANNEL C1 MONDAY MODIFY HOUR MODIFY MINUTE MODIFY BLOCK MODIFY SINGLE DAY 12

13 LLYo can either change or delete a block, i.e. a switching time copied for several days (e.g. Mon-Fri) or a single switching time Change individal switching times ¾Press MENU ¾Select PROGRAM and press OK to confirm ¾Select MODIFY, confirm by pressing OK ¾Select CHANNEL C1 or C2, confirm with OK ¾Select day, confirm with OK ¾MODIFY HOUR, se the + or bttons to change hor and minte and confirm with OK. ¾To change several switching times, select MODIFY BLOCK, confirm with OK Delete switching program MENU PROGRAM NEW CHECK MODIFY DELETE CHANNEL C1 MONDAY DELETE BLOCK DELETE SINGLE DAY 13

14 LLYo can either delete a block, i.e. a switching time copied for several days (e.g. Mon-Fri) or a single switching time ¾Press MENU ¾Select PROGRAM and confirm with OK ¾Select DELETE, confirm with OK ¾MONDAY is displayed, confirm with OK ¾Select DELETE BLOCK, confirm with OK ¾With DELETE MONDAY etc. individal days can also be cleared Activating PIN code The PIN code is set in OPTIONS via the men. LLIf yo have forgotten yor PIN, call the Garo Hotline. LLHave the serial nmber ready. MENU OPTIONS OPERATING HOURS LCD ILLU- MINATION LANGUAGE PIN FACTORY SETTING INFO END NO PIN WITH PIN CURRENT PIN NEW PIN

15 Setting manal or permanent switching Manal or permanent switching can be set via the men in MANUAL or (in the atomatic screen) by btton combination (see pictre). Manal control: Reversing the channel stats to the next atomatic or programmed switching. Permanent switching: As long as a permanent switching (on or off) is activated, the programmed switching times are ineffective ok Chanel C1 Chanel C2 Activating manal control ¾Briefly press both bttons simltaneosly Activating permanent switching ¾Press both bttons simltaneosly for 2 seconds Cancelling manal/permanent switching ¾Press both bttons simltaneosly Hor conter The operating hors of the channel (relay) are displayed and deleted in the OPTIONS men. If the nmber of operating 15

16 hors exceeds the vale set in the Service men, SERVICE will appear in the display. Example: Replace a lamp after after 5,000 h. ¾Delete operating hors or set a higher vale in Service (e.g. to 10,000 h) Using the memory card All fnctions can also be set on the PC sing the OBELISK software and transferred to the device via the memory card. ¾Insert memory card in the time switch ¾Read in/ot saved switching times and device setps in the time switch or start Obelisk program ¾Remove memory card after copying etc.!! Avoid mechanical overload and contamination dring storage/transport LLPC software OBELISK available at 16

17 Copying OBELISK TIME This copies the switching program and optionally all time switch settings (e.g. external inpt, time format etc.) from the memory card in the time switch. Copying TIME OBELISK This copies all switch programmes and settings from the time switch to the memory card. Starting OBELISK program Takes on the switching times that are programmed on the memory card. As soon as the memory card is removed, the switching times of the time switch are re-activated. OBELISK COPY OBELISK -> TSWI OVERWRITE OK COPY TSWI RUN -> OBELISK OBELISK OVERWRITE OK CHECK OBELISK Resetting the time switch ¾Press the 4 bttons simltaneosly Yo can choose between KEEP PROGRAM and DELETE PROGRAM 17

18 6. Technical data Operating voltage: V AC +10 % / 15 % Freqency: Power consmption DV1K / DV2K: Hz max. 0,84/1,13 W Max switching capacity: 16 A (at 250 V, cos ϕ = 1) switching capacity: 10 A (at 250 V, cos ϕ = 0,6) Min. switching capacity: 10 ma/230 V AC 100 ma/ 24 V AC/DC Switching otpt: switching of choice of phase is permitted GTR DV1K: sitable for switching SELV (Safe Extra-Low Voltage) Shortest switching time: 1 min Protection rating: IP 20 in accordance with EN Protection class: II in accordance with EN sbject to designated installation Operating temperatre: 30 C +55 C Power reserve: 10 years at +20 C Time accracy (typical): ± 0,25 s/day (25 C) Rated implse withstand voltage: 4 kv Polltion degree: 2 Contact: wo way switch Glow lamp load: 2600 W Halogen lamp load: 2600 W Florescent lamp load: ncorrected: Series corrected: parallel-corrected: Compact florescent tbes (EVG): LED lamps (< 2 W): LED lamps (> 2 W < 8 W): LED lamps (> 8 W): 2300 VA 730 VA (80 µf) 170 W 30 W 100 W 120 W 18

19 7. Contact Garo AB Södergatan GNOSJÖ SWEDEN Hotline: J Ç info@garo.se Hotline: J Ç info@garo.ie Hotline: J Ç myynti@garo.fi Hotline: J Ç garo@garo.no Hotline: J Ç info@garo.se Hotline: J Ç info@garo.com.pl 19