Plug-in screwless terminal NC contact. OBELISK top2 memory card ( )

Transcription

1 cable E Digital twilight switch UA 111 top / UA 112 top / oad line connection Plg-in screwless terminal C contact Test tap 1. Basic safety information! WARIG Danger of death throgh electric shock or fire! ¾Installation shold only be carried ot by a qalified electrician! The device is designed for installation on DI top hat rails (in accordance with E 60715)! OBEISK top2 memory card: Avoid mechanical overload and contamination dring storage/transportation OBEISK top2 memory card ( ) ¾Mont on DI top hat rails (as defined in E 60715) ¾Switched voltage-free ¾Ensre device cannot be switched on ¾Check absence of voltage ¾Earth and bypass ¾Cover or shield any adjacent live components Connecting the cable 2. Proper se!! The digital twilight switch is sed for lighting eqipment (streets), external stairways, display windows, entrances etc. Only for se in closed, dry rooms Sensor is installed in the open-air Do not se on safety devices, e.g. escape rote doors, fire safety eqipment etc. Disposal Wiring diagrams UA 111 top2 / UA 112 top2 Ext Data x C2 Ext1Ext Data x ¾Dispose of device in environmentally sond manner 3. Installation and connection Monting the time switch WARIG Danger of death throgh electric shock or fire! ¾Installation shold only be carried ot by a qalified electrician! ¾Strip cable to 8 mm (max. 9) ¾Insert cable in the open DoFix plg-in terminal at 45 2 cables per terminal position possible ¾To open the DoFix plg-in terminal, press screwdriver downwards Disconnecting the cable ¾ Use the screwdriver to psh the load line connection opener downwards click 1

2 Connection/installation of light sensor! Take length of connection cable into accont: (2 x 1.5 mm 2 ), max. 50 m (2 x 0.75 mm 2 )! Avoid rnning sensor wiring parallel to mains power cables ¾Ensre correct polarity. Connect power sorce Monting light sensor ¾Monting light sensor: mm 2, strip cable by 10 mm (max. 11 mm) 4. Device description Display & bttons Text line Channel stats, C2 O = On OFF = Off messwert 18lx Display of the active bttons with the relevant fnction Snrise/snset display x vale display max. o4mm Activate display Open men Cancel men ESC (leave men) Options are displayed Save selection Confirm selection Operating instrctions Installing light sensor ¾Installing light sensor: mm 2, strip cable by 8 mm (max. 9 mm) 8-9 mm max. 10 mm Ø 5-10 mm 1. Read text line text/symbol represents qery 2. Make a decision YES Confirmation O Modify/ Change <9 mm Ø 20 mm IP 40 Press Press t IP 66 ca. 63 mm 2

3 Overview of navigation men OFF C2 OFF IGHT MAUA OPTIOS 9:40 46 SESORS UX VAUES DEAY TIME PERM O PERM OFF OVERRI O TIMER EXT IPUT CD IUMIATIO AGUAGE PI FACTORY SETTIGS IFO The device has been preset at 15 lx for the switch on/ switch off level ¾Press ¾Select IGHT and press to confirm ¾Select or C2, confirm with ¾Select UX VAUE and press to confirm ¾Select UX O and press to confirm ¾Set UX VAUE, confirm with Typical brightness vales Daylight (bright) Office accommodation Hallways and stairs Street lighting Fll moon Set delay lx 500 lx lx 15 lx ca. 0,3 lx Initial operation IGHT CHAE DEUTSCH EGISH ESPAO FRACAIS READIG UX VAUES DEAY TIME O DEAY MIUTE SECODS OFF DEAY MIUTE SECODS ¾Set langage, press to confirm ¾Press any btton and display follows on screen (see figre) If all settings are performed, the screen alternately shows the atomatic display and READIG If a sensor is connected, the measred lx vale appears on screen (only dring mains operation). 5. Settings and fnctions Set lx vales An on/off delay of 1 minte is preset to avoid falty operation cased by lightning, car headlights etc. When the delay ends the channel stats will flash O/OFF. ¾Press ¾Select IGHT and press to confirm ¾Select or C2, confirm with ¾Select DEAY TIME, confirm with ¾Select O DEAY, confirm with ¾MODIFY, se the + or bttons to change minte and confirm with. Allocate sensors The SESORS are allocated in the men nder OPTIOS IGHT UX VAUES DEAY TIME UX O UX OFF OPTIOS SESORS S METER EXTERA OUTPUT CD IUMIATIO 1 SESOR RECOGISED 1 ACTIVE SESOR SESOR 1 READIG SESOR 1 ACTIVE O SESOR * red ED flashes on the sensor * DEACTIVATE ¾Press (see fig.) Connection options: 1 UA + max. 4 light sensors 10 UA + 1 light sensors Σ max. 16 devices (UA + light sensors) 3

4 Presetting: all connected sensors are active for all channels. The sensor that sends the lowest lx vale is active Activating PI code The PI code is set in OPTIOS via the men. If yo have forgotten yor PI, call the Theben Hotline. Have the serial nmber ready. OPTIOS SESORS EXT- IPUT CD UMIATIO AGUAGE PI FACTORY SETTIG IFO O PI WITH PI CURRET PI EW PI Setting manal or permanent switching Manal or permanent switching can be set via the men in MAUA or (in the atomatic screen) by btton combination (see pictre). Manal control: Reversing the channel stats to the next atomatic or programmed switching. Permanent switching: As long as a permanent switching (on or off) is activated, the programmed switching times and switching thresholds are ineffective Channel Channel C2 Activating manal control ¾Briefly press both bttons simltaneosly ok BUTTO: Manal (manal control), Timer (contdown timer) are selectable SWITCH: Permanent On, permanent Off are selectable If a fnction is activated via an external psh btton or switch, EXTERA is displayed. OPTIOS RESETABE EARY CUT SESORS EXT IPUT CD IUMIATIO MIUTES * Use switch withot glow lamp (e.g. in stairwells) BUTTO SWITCH OT ACTIVE * STAIRCASE IGHT OVERRIDE TIMER ¾Press, with select EXT IPUT and follow the indications on the display. Hor conter The operating hors of the channel (relay) are displayed and deleted in the OPTIOS men. If the nmber of operating hors exceeds the vale set in the Service men, SERVICE will appear in the display. Example: Replace a lamp after after 5,000 h. ¾Delete operating hors or set a higher vale in Service (e.g. to 10,000 h) Using the OBEISK top2 memory card All fnctions can also be set on the PC sing the OBEISK software and transferred to the device via the memory card. ¾Insert memory card in the twilight switch ¾Read in/ot saved switching times and device setps in the time switch or start Obelisk program ¾Remove memory card after copying etc.!! Avoid mechanical overload and contamination dring storage/transport PC software OBEISK top2 available at Activating permanent switching ¾Press both bttons simltaneosly for 2 seconds Cancelling manal/permanent switching ¾Press both bttons simltaneosly Set external inpt For the channel, an EXTERA IPUT (see figre) can be set with different fnctions. 3 sb-mens can be selected: Inactive, psh btton (fnction), switch (fnction) OT ACTIVE: The external inpt has no fnction 4

5 Copying OBEISK UA This copies the switching program and optionally all time switch settings (e.g. external inpt, time format etc.) from the memory card in the twilight switch. Copying UA OBEISK This copies all switch programmes and settings from the twilight switch to the memory card. Starting OBEISK program Takes on the switching times and the threshold vales that are programmed on the memory card. As soon as the memory card is removed, the switching times of the twilight switch are re-activated. OBEISK COPY OBEISK -> UA OVERWRITE COPY UA RU -> OBEISK OBEISK OVERWRITE Resetting the twilight switch CHECK OBEISK ¾Press the 4 bttons simltaneosly Yo can choose between KEEP PROGRAM and DEETE PROGRAM 6. Technical data Operating voltage: V~(UA 111 top2 RC) / V~ (UA 112 top2 RC), +10 %/-15 % Freqency: Hz Brightness range: 1 99,000 lx On/off switch delay: 0 59 min Power consmption na 121 / na 122: 1,8 W / 2,2 W Switch otpt: phase-independent (zero-crossover switching) Contact: µ-contact, two way switch Switching capacity: 16 A/250 V~ cos ϕ = 1 Florescent lamp switching capacity: 10 AX Switching capacity min.: 10 ma/250 V AC 100 ma/12 V AC/DC Glow lamp load: 2600 W Halogen lamp load: 2600 W Florescent lamps KVG: ncorrected: series-corrected: parallel-corrected: ead-lag circit (do): Florescent lamps (EVG Electronic series devices): Compact florescent tbes (EVG): ED lamps (< 2 W): ED lamps (2 W 8 W): ED-lamps (> 8 W): Permissible ambient temperatre: Protection class: Protection rating: device Monted light sensor Installation light sensor 800 VA (80μF) 650 W 170 W 30 W 100 W 120 W 30 C C, 40 C C (sensor) II (light sensors III) if correctly monted IP 20 IP 55 IP 66 (frontside) IP 40 (backside) 7. Contact Theben AG Hohenbergstr Haigerloch GERMAY Tel Fax Hotline Tel hotline@theben.de Addresses, telephone nmbers etc. 5