Flamco Mounting products

Size: px

Start display at page:

Download "Flamco Mounting products"

Collin Leonard
6 years ago
Views:

1 M O U N T I N G P R O U C T S 8 Flamco Mounting products K BALL AN HINGE JOINT VG ANGULAR PLATE KCL PROFILE CLAMP GP MOUNTING PLATE BMG ASSEMBLY STRIP Edition 2007 / UK

Mounting products The best flexible and fixed mountings are from Flamco The expansion of pipes, as a result of temperature changes caused by the liquid fl owing through them, requires in many cases a

For these too Flamco offers a of possibilities which can be found in these pages and in our other brochures. FLEXIBEL K ball and hinge joint. K BALL AN HINGE JOINT BVP mounting fixed.

Vertical adjustment by turning the lowest part of the ball and hinge joint after mounting in the pipe. BKI pipe hanger with rubber lining: page 1.7. GP mounting plate page 8.5.

2 Mounting products The best flexible and fixed mountings are from Flamco The expansion of pipes, as a result of temperature changes caused by the liquid fl owing through them, requires in many cases a flexible mounting. For this, Flamco offers a of practical solutions which take into account the built in height and the strain required. In other cases, however, fixed constructions are essential. For these too Flamco offers a of possibilities which can be found in these pages and in our other brochures. FLEXIBEL K ball and hinge joint. K BALL AN HINGE JOINT BVP mounting fixed. K ball and hinge joint For a flexible and adjustable mounting. Max. movement of the ball and hinge joint is 2 x 20. Vertical adjustment by turning the lowest part of the ball and hinge joint after mounting in the pipe. BKI pipe hanger with rubber lining: page 1.7. GP mounting plate page 8.5. BSP fixed point clip: page 1.5. FIXE ANGULAR PLATE GK 150 sliding piece. BSA clip for every type of pipe: page 1.2. VG ANGULAR PLATE VG angular plate Especially suitable for fixed constructions in combination with BSP fixed brackets. Also for adjustable hanging and support constructions. Fitted with slotted holes. Tables with types and technical information: page See also FlamcoFit for flexible mounting (page 5.2). 8.2

FLEXIBEL FLEXIBEL FLEXIBEL FLEXIBEL FLEXIBEL Mounting products KK SHORT BALL AN HINGE JOINT GK 50 SLIING PIECE GK 150 SLIING PIECE GK 500 SLIING PIECE GK 750 SLIING PIECE KK short ball and hinge

movement of the ball and hinge joint is 2 x 20. GK 50 sliding piece For all sliding pieces: for a flexible mounting in the length direction of the tube.

By using Flamco rail R 2 instead of a sliding piece, a greater sliding length is possible. Fitted with slotted holes for accurate adjustment of the sliding piece. Sliding material PA 6 (nylon).

GK 750 sliding piece Sliding length more than 120 mm. Suitable for various screw s and for heavy loads. Fitted with slotted holes for accurate adjustment of the sliding piece.

3 FLEXIBEL FLEXIBEL FLEXIBEL FLEXIBEL FLEXIBEL Mounting products KK SHORT BALL AN HINGE JOINT GK 50 SLIING PIECE GK 150 SLIING PIECE GK 500 SLIING PIECE GK 750 SLIING PIECE KK short ball and hinge point For a flexible mounting with restricted headroom. Inspection hole for monitoring the screw depth of the support rod (also applicable to ball and hinge joint K). Max. movement of the ball and hinge joint is 2 x 20. GK 50 sliding piece For all sliding pieces: for a flexible mounting in the length direction of the tube. Suitable for Flamco rail R 1, R 2, R 3, R 4, R 6, R 7 and R 8. The length of slide depends on the rail length. Sliding material PA 6 (nylon). GK 150 sliding piece Standard sliding length 60 mm. By using Flamco rail R 2 instead of a sliding piece, a greater sliding length is possible. Fitted with slotted holes for accurate adjustment of the sliding piece. Sliding material PA 6 (nylon). GK 500 sliding piece Max. sliding length 90 mm. The pressure plate is completely enclosed in the sliding piece. Fitted with slotted holes for accurate adjustment of the sliding piece. GK 750 sliding piece Sliding length more than 120 mm. Suitable for various screw s and for heavy loads. Fitted with slotted holes for accurate adjustment of the sliding piece. Sliding material PA 6 (nylon). FIXE ANGULAR PLATE More possibilities for fixed mounting FIXE BVP MOUNTING FIXE BSF CLIPS (PAGE 1.4) KB CLIPS (PAGE 1.5) BSP FIXE POINT CLIPS (PAGE 1.5) VH MOUNTING CORNERS (PAGE 6.4) BVP mounting fixed Especially suitable for fixed constructions in combination with BSP fixed brackets, screwed end 10 and GP mounting plates. Electrolytically galvanized. VP MOUNTING PLATES (PAGE 6.4) RZ SUPPORT SALES (PAGE 6.5) RH MOUNTING ANGLES (PAGE 6.5) GP MOUNTING PLATE (PAGE 8.5) 8.3

Mounting products For mounting to profiles or to a wall, Flamco It is not

Sometimes, mounting on steel profiles is the only, or the best, possibility.

RB rail mounting For mounting Flamco rail on steel profiles without drilling

The load capacity is relative to the Flamco rail used.

BMV AN BM ASSEMBLY STRIPS BME AN BMU ASSEMBLY STRIPS BMV and BM assembly

Supplied complete with coach bolt, washer and plastic plug.

4 Mounting products For mounting to profiles or to a wall, Flamco It is not always possible or desirable to mount pipes on the ceiling. Sometimes, mounting on steel profiles is the only, or the best, possibility. But then without the need for drilling or welding! With Flamco profile mountings, this is no problem. For mounting to a wall, Flamco also offers you a wide selection of products. See for yourself in the following pages. RB RAIL MOUNTING KCH profile clamp. KVS- profile clamp. KCK profile clamp. RB rail mounting. Flamco rail R. RB rail mounting For mounting Flamco rail on steel profiles without drilling or welding. Suitable for Flamco rail R 1, R 2, R 3, R 4, R 6, R 7 and R 8. The load capacity is relative to the Flamco rail used. Supplied complete with top and bottom plate, nut and bolt. BMV AN BM ASSEMBLY STRIPS BME AN BMU ASSEMBLY STRIPS BMV and BM assembly strips For double wall bracket mounting. Supplied complete with coach bolt, washer and plastic plug. Aligned tube assembly through fixed heart distance. BME and BMU assembly strips For double wall bracket mounting. Adjustable centres. The BS universal brackets (brochure 1) can be used in combination with the BMV, BM, BME and BMU assembly strips. 8.4

5 has the professional solution! Mounting products KVS- PROFILE CLAMP KCL AN KCK PROFILE CLAMP KC AN KCH PROFILE CLAMP LT / LTM / LTV ROOF PROFILE MOUNTING KVS- profile clamp For mounting to a steel profile without welding or drilling. Hinged mounting, adjustable vertically. Quick mounting using a hammer. KCL, and KCK profile clamps For mounting to a steel profile without welding or drilling. Vertically adjustable. The bolt must be tightened by hand, plus one additional rotation. A of types are FM and/or VdS approved. KC and KCH profile clamps For mounting a single suspension underneath a steel profile without welding or drilling. The bolt must be tightened by hand, plus one additional rotation. A of types are FM and/or VdS approved. LT / LTM / LTV roof profile mounting For mounting screwed rod to steel roof profiles. LT: with unthreaded hole. LTM: with welded nut. LTV: vertical adjustment by turning the lowest part of the threaded tube after mounting the threaded rod. BMF GP M x 30 GP x 20 GP G 1 / 2-60 SRG 1 M 10 BMG GP 10-1 / x 40 RTG 4-1 / 2 GP 10-1 / 2-60 GPK M x 30 INSERT Flamco offers a particularly large choice in mounting plates s BMF and BMG for mounting two brackets. s BMF and BMG in combination with S wire tacks suitable for BS universal brackets. Possibility of achieving two different pipe distances from the wall per assembly strip. Other types for mounting flush to the wall or ceiling using a threaded rod or threaded pipe. Circular or right-angled shape. Available with various threaded s. epending on the type, with or without round holes and/or slotted holes for mounting. 8.5

Mounting products Everything you need for the best possible installation can be found on these pages A very wide programme of mounting accessories is

For a good installation, you may choose from a large of mounting accessories, such as those illustrated on these pages.

ST LOA SPREAER threaded rod. M nut. PV in-line connector.

6 Mounting products Everything you need for the best possible installation can be found on these pages A very wide programme of mounting accessories is characteristic of Flamco. A pipe and clip is rarely enough. For a good installation, you may choose from a large of mounting accessories, such as those illustrated on these pages. Whichever product you choose is, naturally, dependent on the other products you use, the situation, and the installation objective. A damper. ST LOA SPREAER threaded rod. M nut. PV in-line connector. ST load spreader For supporting plastic or insulated pipes, so that constriction of pipe or insulation is avoided. Suitable for use in combination with BK pipe hangers. esigned to prevent movement when installed in hte pipe hanger. BK pipe hanger. A AAPTOR ST load spreader. A adaptor For a rigid construction in combination with a BS universal clip. Can also be used with a GP 1 2 mounting plate. 8.6

Mounting products THREAE RO AN THREAE EN IP IMPACT PIN STUS KSM COUPLING PIECES PV IN-LINE CONNECTOR threaded rod and threaded end Suitable for all installations that require threaded rod.

Studs For mounting BM wall clips and BS universal clips.

PV in-line connector For easy and quick of two threaded rods of equal diameter. Vertical adjustment possible. up to and including 10 cm.

7 Mounting products THREAE RO AN THREAE EN IP IMPACT PIN STUS KSM COUPLING PIECES PV IN-LINE CONNECTOR threaded rod and threaded end Suitable for all installations that require threaded rod. rod standard at 1 metre length. ends available in lengths from 2.5 cm IP impact pin For mounting BM wall clips and BS universal clips. Supplied including wall plug. Quick mounting using a hammer. Studs For mounting BM wall clips and BS universal clips. KSM coupling pieces epending on the type, to be used for connecting two threaded rods, for mounting BS universal clips and for mounting BK pipe hangers one under another. PV in-line connector For easy and quick of two threaded rods of equal diameter. Vertical adjustment possible. up to and including 10 cm. With Flamco you can choose from an extensive range of mounting accessories S threaded stud for mounting BS universal clips. Available in lengths from 12 mm up to and including 65 mm. A damper for noise suppression. Attenuation 20 db(a). Bolts, plugs and screws in a large of types. Toggle anchor specially for hollow walls and trapezium roofing plates, with large washer. Spilt anchor, for mounting in which a Flamco expander tool must be used. 8.7

8 Mounting products K and KK ball and hinge joints, GK sliding pieces, VG angular plate, BVP fixed mounting and A adaptors Ball and hinge joints electrolytically-galvanized. GK 50 sliding piece has a nylon PA 6 sliding piece and a brass threaded. GK 150: base plate and tube ST 37 electrolytically galvanized. Sliding tube nylon PA 6 and plastic bar. GK 500: base plate and sliding tube ST 37 electrolytically galvanized. Sliding block nylon PA 6. GK 750: bracket and tube ST 37 electrolytically galvanized. Sliding tube nylon PA 6 and plastic bar. VG angular plate and BVP fixed mounting electrolytically galvanized. Versions and dimensions K ball and hinge joints Length in mm Max. working load 1 2 L 2 - L 3 L 1 N KS 8 x 6 M 8 ext. M 6 int KS 8 x 8 M 8 ext. M 8 int K KK K 10 x 6 M 10 ext. M 6 int K 10 x 8 M 10 ext. M 8 int K 10 x 10 M 10 ext. M 10 int K 6 x 6 M 6 int. M 6 int K 8 x 8 M 8 int. M 8 int K 12 x 12 M 12 int. M 12 int Versions and dimensions KK short ball and hinge joints Length in mm Build in height in mm Max. working load 1 2 L 2 min. L 1 H N Versions and dimensions GK 50 and GK 150 sliding pieces KK 8 x 8 M 8 ext. M 8 int KK 10 x 10 M 10 ext. M 10 int imensions in mm Max. working load M 1 2 tube A gr. plate sl. hole B C E N GK 50 - M 6 M GK 50 - M 8 M GK M 8/10 - M 8 M x 35 x x x GK M 10/12 - M 10 M x 35 x x x Extended dimensional drawings available as PF on the C. GK 150 Versions and dimensions GK 500 and GK 750 sliding pieces imensions in mm Max. working load M tube A gr. plate sl. hole B C E N GK M 6 M x GK M 8 M x GK M 10 M x GK M 12 M x GK x 40 x x x GK 500 VG Versions and dimensions VG angular plate imensions in mm A B C E K L M S sl. hole great sl. hole little VG 140 x 100 x x x Versions and dimensions BVP fixed mounting imensions in mm A B C X G 1 G 2 E sl. hole BVP x Ø 11 Ø BVP x Ø BVP Versions and dimensions A adaptors imensions in mm 1 2 Ø B L A 8 x 1 /2 M 8 ext. 1 /2 int A 10 x 1 /2 M 10 ext. 1 /2 int A 8.8

9 RB rail mountings, KVS- / KC / KCH / KCK / KCL profile clamps For each mounting, two RB rail mountings are required. RB rail mounting electrolytically-galvanized. KVS- profile clamp executed in black spring steel. KCL profile clamps manufactured from malleable cast iron GTS 35 IN KCK GTS 45 IN The KCK profile clamp is fitted on the underside with two different threaded s. KC and KCH profile clamps in wrought steel C 22 / C 35 IN Adjustment bolt in steel IN Mounting products Versions and dimensions RB rail mountings Flamco Max. clamping Bolt imensions in mm rail height H mm A B RB 1 R 1 15 M 10 x RB 2 R 2 15 M 10 x RB 3 / 4 R 3 / R 4 15 M 10 x RB 6 R 6 15 M 10 x RB 7 / 8 R 7 / R 8 15 M 10 x RB Versions and dimensions KVS- profile clamps Flange thickness B imensions in mm Max. working load A mm H E N KVS- 6 x M KVS- 6 x M KVS- 6 x M KVS- 6 x M KVS- KVS- 8 x M KVS- 8 x M KVS- 8 x M KVS- 8 x M Versions and dimensions KC and KCH profile clamps Adjustment bolt Max. flange thickness imensions in mm Max. working load or threaded rod A B mm H 1 H 2 E F N black galvanised KC 6 M 6 M 8 x KC 8 M 8 M 8 x KC 10* M 10 M 10 x KC 12* M 12 M 10 x KC / KCH KCH 8 M 8 M 10 x KCH 10 M 10 M 10 x KCH 12 M 12 M 12 x KCH 16 M 16 M 12 x * FM approved. VdS approved Versions and dimensions KCL and KCK profile clamps Adjustment bolt Max. flange thickness imensions in mm Max. working load A B C mm H 1 H 2 E F N black galvanised KCL 6 M 6 M 6 M 6 x KCL 8 M 8 M 8 M 8 x KCK 6 M 6 M 8 M 6 x KCK 8 M 8 M 10 M 8 x KCK 10* M 10 M 8 M 10 x KCK 12* M 12 M 12 M 10 x * FM approved. For the KCK 10, the FM approval only applies when the threaded M 10 (A) is used. VdS approved. KCL / KCK 8.9

10 Mounting products LT / LTM / LTV roof profile mountings, BMF / BMG / BMV / BM / BME / BMU assembly strips / A dampers, GP and SRG mounting plates LT, LTM and LTV roof profile mountings electrolytically galvanized. BMV / BM / BME and BMU assembly strips: coach bolt, washer and assembly strip electrolytically galvanized. In combination with BM and BMU assembly strips, BM wall brackets t.m. 8 x 1 su, BM 8 x 35 su and BM 8 x 33/38 su can be used BMA wall brackets t.m. 8 x 1 su and 8 x 28 su. BMK wall brackets t.m. 8 x 35 su. BMF and BMG assembly strips electrolytically galvanized and fitted with a threaded M 8 for S threaded studs. The GP mounting plate can also be used in fixed constructions, in combination with KB clips or BVP fixed mounting. Versions and dimensions LT / LTM / LTV roof profile mountings imensions in mm A B C Ø d E F LT x Ø LTM x M LTM x M LTM x M LTV x M LTV x M LTV Versions and dimensions BMF / BMG assembly strips A Slotted hole imensions in mm mm mm E F BMF 8-8 x M x BMF 8-8 x M x BMF 8-8 x M x BMF 8-8 x M x BMF 8-8 x M x BMF 8-8 x M x BMF 8-8 x M x BMG 8-50 / M 8 10 x BMF BMG Versions and dimensions BMV / BM / BME / BMU assembly strips A Mounting coach screw imensions in mm BS clip mm E F till BMV 8 x M 8 Ø BM 8 x M 8 Ø BM 8 x M 8 Ø BM 8 x M 8 Ø BME 8 x 50 / M 8 Ø BMU 8 x 60 / M 8 Ø BMV / BM BME Versions and dimensions A dampers imensions in mm Max. working load 20 db(a) A B C E F N A 6 M 6 Ø 40 x 30 Ø A 8 M 8 Ø 40 x 30 Ø A 10 M 10 Ø 50 x 40 M A Versions and dimensions GP/ SRG mounting plates Ø 60 imensions in mm Slotted hole A B H E GP 1 /2 / M 10 - Ø 60 1 /2 / M Ø x 6 / 15 x GP 1 /2 / M 10 - Ø 60 1 /2 / M 10 - Ø GP 1 / /2 44 Ø x 6 / 15 x GP 3 / /4 50 Ø Ø SRG 1-3 /8 3 / on request SRG 1-1 /2 1 / SRG 1-3 /4 3 / on request SRG 1 - M 10 M GP 8.10

11 GP / RTG mounting plates, PV parallel connectors / srews The GP mounting plates 8, 10, 12 and 1 2 are suitable for use in combination with a BS universal bracket. The GP mounting plate can also be used in fixed constructions, in combination with KB clips or BVP fixed mounting. Mounting products Version and dimensions GP mounting plates 70 x 20 imensions in mm Slotted hole A B H E GP 8 / x 20 M 8 / x 8.5 on request GP Versions and dimensions GP / GPK mounting plates 80 x 30 imensions in mm Slotted hole A B H E GP 8-80 x 30 M x GP 8 / x 30 M 8 / x GP x 30 M x GPK x 30 M x GP x 30 M x GP x 30 M x GP 3 /8-80 x 30 3 / x GP 1 /2-80 x 30 1 / x GP 1 /2 / M x 30 1 /2 / M x Versions and dimensions GP / GPK mounting plates 120 x 40 imensions in mm Slotted hole A B H E GP 1 /2-120 x 40 1 / x GP 3 /4-120 x 40 3 / x GP x x GP 3 /8-120 x 40 3 / x GP x 40 M x GP x 40 M x GP x 40 M x GP x 40 M x GP 1 /2 / M x 40 1 /2 / M x GPS 3 /8-120 x 40 3 / x GPS 1 /2-120 x 40 1 / x GPS 3 /4-120 x 40 3 / x GPS x x GP RTG Versions and dimensions RTG mounting plates 120 x 60 imensions in mm B H E RTG 4-1 /2 1 / RTG 4-3 /4 3 / RTG Versions and dimensions PV parallel connectors Suitable for imensions in mm Max. working load in threaded rod A B C N PV 6 M PV 8 M PV 10 M PV Versions and dimension screws Hexagonal screw M 6 x Philips head screw M 8 x Internal hexagonal screw M 6 x Internal hexagonal screw M 8 x Internal hexagonal screw M 10 x SCREW 8.11

Mounting products threaded rod and threaded end, S threaded stud, threaded tubes internal / external rods and threaded ends according to IN 13 part 12, rolled thread, electrolytically galvanized.

12 Mounting products threaded rod and threaded end, S threaded stud, threaded tubes internal / external rods and threaded ends according to IN 13 part 12, rolled thread, electrolytically galvanized. Material ST 37-2, quality 4.6. Versions and dimensions threaded rods Max. working load N 1 m 2 m 6 M M M M M M Versions and dimensions threaded ends Length in mm 8 x 25 M x 40 M x 70 M x 80 M x 100 M x 25 M x 40 M x 60 M x 80 M x 100 M Versions and dimensions S threaded studs imensions in mm L A B S 8 x 12 M S 8 x 25 M S 8 x 35 M S 8 x 45 M S 8 x 55 M S 8 x 65 M S Version and dimensions threaded tube, internal Length in mm tube, internal 1 /2 1 /2 int Versions and dimensions threaded tube, external Length in mm tube, external 3 /8 3 /8 ext tube, external 1 /2 1 /2 ext tube, external 3 /4 3 /4 ext tube, external 1 1 ext THREAE TUBE, INTERNAL THREAE TUBE, EXTERNAL 8.12

IP impact pins, threaded studs HO threaded studs exclusive plug. H threaded studs including plug. studs according to IN 13 part 12, rolled thread, electrolytically galvanized.

13 IP impact pins, threaded studs HO threaded studs exclusive plug. H threaded studs including plug. studs according to IN 13 part 12, rolled thread, electrolytically galvanized. Material ST 37-2, quality 4-6. IP impact pins including plug. Mounting products Versions and dimensions IP impact pins including plug imensions in mm Length SW IP 8 x 50 M IP 8 x 80 M IP 8 x 100 M IP 8 x 120 M IP IP 10 x 80 M IP 10 x 100 M IP 10 x 100 M Versions and dimensions HO / HZ / H threaded studs imensions in mm Required plug L A B SW Length Ø depth HO 8 x 50 excl. plug M HO 8 x 80 excl. plug M HO 8 x 120 excl. plug M HO 10 x 70 excl. plug M HO 10 x 90 excl. plug M HO 10 x 120 excl. plug M HO 12 x 120 excl. plug M HO HZ HZ 8 x 50 excl. plug Ø H 8 x 50 incl. plug M H 8 x 80 incl. plug M H 8 x 120 incl. plug M H 10 x 70 incl. plug M H 10 x 90 incl. plug M H 10 x 120 incl. plug M H 12 x 120 incl. plug M HZ 8 x 50 incl. plug Ø Versions and dimensions threaded studs imensions in mm Length Ø stud 1 /2 1 / stud M 10 M Versions and dimensions threaded studs imensions in mm Length Ø M 8 x 50 M M 8 x 80 M M 8 x 100 M M 8 x 120 M M 8 x 140 M M 8 x 160 M M 10 x 60 M M 10 x 80 M M 10 x 100 M M 10 x 120 M M 10 x 140 M M 10 x 160 M M 10 x 180 M M 12 x 100 M M 12 x 120 M THREAE STU THREAE STU 8.13

14 Mounting products studs, coupling pieces and reducers Versions and dimensions threaded studs imensions in mm A Length Ø M 10 x 50 M M 10 x 80 M M 10 x 100 M M 10 x 120 M M 10 x 140 M THREAE STU Versions and dimensions KSM coupling pieces Extension BK under BK For BS universal L 1 L 2 A B C clips mm mm KSM 1-12 int. 8 int. 12 int. x KSM 2 12 ext. 8 int. 6 int. 8 int. x x KSM 3 8 ext int. - x KSM 4-10 int. - - x KSM 6-6 int. - - x KSM 7-8 int. - - x KSM 9-12 int. - - x KSM ext int KSM int. - 6 int. x KSM ext int KSM 13 8 ext int. - - x KSM ext int. - - x KSM ext int. - - x KSM 16 8 ext int. - - x KSM ext int KSM ext int KSM Versions and dimensions coupling pieces A Coupling piece 8 x 10 M 8 M Coupling piece 10 x 8 M 10 M Coupling piece 12 x 10 M 12 M Coupling piece 10 x 12 M 10 M Coupling piece 12 x 8 M 12 M Versions and dimensions coupling pieces internal thread imensions in mm Length Coupling piece M 6 x 25 M Coupling piece M 6 x 30 M Coupling piece M 8 x 25 M Coupling piece M 8 x 35 M Coupling piece M 10 x 25 M Coupling piece M 10 x 35 M Coupling piece M 12 x 25 M Versions and dimensions reducers From To Reducer 3 /4-1 /2 3 /4 1 / Reducer 1 /2 - M 10 1 /2 M Reducer 3 /8 - M 10 3 /8 M Reducer M 12 - M 8 M 12 M COUPLING PIECE INTERNAL THREA REUCER 8.14

15 ST support dishes, plugs, non drill anchors, eyebolts and plastic inserts Toggle anchor for special mounting to hollow ceilings, walls and trapezium roof plates. Mounting products Versions and dimensions ST support dishes Suitable for BK clip Versions and dimensions plugs imensions in mm A d Ø min. Ø max. ST ST ST ST ST ST ST ST ST imensions in mm Screw Ø Anchor plug M Anchor plug M Anchor plug M ST Universal plug M Universal plug M Universal plug M PLUGS Plastic plug M Plastic plug M Plastic plug M Toggle anchor M Versions and dimensions non drill anchors Non drill anchor M Non drill anchor M Non drill anchor M Non drill anchor M Impact pin M Impact pin M Impact pin M Impact pin M Versions and dimensions eyebolts Eyebolt copper M Eyebolt zinc-plated M Eyebolt SS M Versions and dimensions plastic inserts imensions in mm Plastic insert transparent 30 x Plastic insert black 30 x NON RILL ANCHOR IMPACT PIN EYEBOLT PLASTIC INSERT 8.15

16 MOUNTING PROUCTS K BALL AN HINGE JOINT CONTENTS PAGE VG ANGULAR PLATE Flexible mountings 8.2/8.3 Fixed mountings 8.2/8.3 Profile mountings 8.4/8.5 Assembly strips 8.4/8.5 Mounting products 8.6/8.7 Tables 8.8/8.15 Flamco UK Limited Unit 4, St. Michael s Road Lea Green Industrial Estate St. Helens, Merseyside WA9 4WZ Tel.: +44 (0) Fax: +44 (0) info@flamco.co.uk KCL PROFILE CLAMP GP MOUNTING PLATE There is more information on the C that accompanies this brochure. Copyright Flamco UK Limited. No part of this publication may be reproduced or published in any way without explicit mention of the source. The data listed are solely applicable to Flamco products. Flamco UK Limited shall accept no liability whatsoever for incorrect use, application or interpretation of the technical information. Flamco UK Limited reserves the right to make technical alterations. BMG ASSEMBLY STRIP Flamco UK Limited conditions of sale apply

11. Wall and Floor Mounted Clips

11. Wall and Floor Mounted Clips The Flamco s BM range of wall mounted clips is designed for installing threaded tubes, sprinkler pipes, thin wall steel tubes and copper pipes. These one piece clips, complete