3) The contains a computer's main hardware components. 3) A) master case B) motherboard C) system unit D) CPU

Transcription

1 FALL COMP100 MIDTERM-2 EXAM /FACULTY OF ECON. AND ADMINISTRATIVE SCIENCES OF EUL Student Registration No: Instructor: Prof.Dr.Hüseyin Oğuz Student Name-Surname: Dept. of Computer Information Systems Date: /09:00-11:00(Surname:A-İ)/AS209 1) In the binary numbering system, one binary digit is called a: 1) A) character. B) word. C) byte. D) bit. 2) A(n) port sends and receives data eight bits at a time over eight different wires. A) COM2 B) parallel C) serial D) IrDA 2) 3) The contains a computer's main hardware components. 3) A) master case B) motherboard C) system unit D) CPU 4) Which type of memory has L1 and L2 levels of storage? 4) A) RAM B) Cache C) ROM D) Flash 5) A processor's instruction set: 5) A) is unique to the type of processor. B) will run programs that were created for a noncompatible processor. C) is the same for different types of processors. D) has nothing to do with the ability of the computer to run a program. 6) The width of the data bus: 6) A) has no bearing on the CPU's overall speed. B) is either 8-bit or 32 bit. C) helps determine the computer's word size. D) has remained constant over the last decade. 7) The character code is the most widely used code on IBM mainframe computers. 7) 8) A SCSI port: 8) A) allows you to connect multiple SCSI-compatible devices in a daisy-chain fashion. B) is a type of serial interface. C) transfers data very slowly. D) uses the same external connectors for all SCSI peripherals. 9) A serial port: 9) A) sends and receives data one bit at a time. B) sends and receives data in streams of bytes. C) is decreasing in use because computer performance does not benefit from two-way communication. D) can accommodate only one-way communication.

2 10) Memory that the processor can use to store frequently accessed program instructions and data in order to improve the overall speed of the computer is called memory. 10) 11) Current computers have clock speeds in the range. 11) A) Gigahertz (GHz) B) Megahertz (MHz) C) Kilohertz (KHz) D) Terrahertz (THz) 12) Running multiple, simultaneous processors is called: 12) A) serial processing. B) megaprocessing. C) parallel processing. D) Co-processing. 13) The is animated, onscreen help. 13) A) Office Assistant B) Help task pane C) Wizard task pane D) Type a question for help box 14) The most recently used commands are displayed in the. 14) 15) The toolbar contains buttons for magnifying the page onscreen, displaying one page, displaying multiple pages, or shrinking the document to fit. A) Edit B) Print C) Output D) Print Preview 15) 16) Word contains an onscreen assistance feature called: 16) A) the Answer Wizard. B) Help. C) Web assistance. D) Index. 17) If you no longer want an item on the Office Clipboard task pane, choose. A) remove B) archive C) delete D) edit 17) 18) The shortcut keys for cutting text are: 18) A) Ctrl + C B) Ctrl + X C) Ctrl + S D) Ctrl + V 19) Keywords and phrases appearing in blue are called. 19) 20) When a menu item is visible, you see a(n) next to the item. 20) 21) The of an active window is blue. 21) A) selected menu B) title bar C) task bar D) task pane

3 22) capitalizes the first letter of each selected word. 22) A) Title case B) Uppercase C) Sentence case D) Toggle case 23) Use the Smart Tag to select formatting of pasted text. 23) 24) If you have information within a cell that you wish to divide into several cells, choose the command on the Tables and Borders Toolbar. A) Divide Cells B) Combine Cells C) Split Cells D) Format Cells 25) You have been given a research paper to edit. If you want to move an object to another location, the best plan would be to: A) cut the object and paste into the new location. B) copy the object and then paste into a new location. C) not to modify objects as they are set items. D) delete the object and reinsert. 26) If you wish to add column headings to an existing table, choose Table, Insert, and then the option. A) Column Headings B) New Row C) Insert Row D) Rows Above 27) If you are pasting text into a new document and you want the text to be formatted like the new document, you should choose to match the document. A) synchronized B) destination C) original D) saved 28) Pressing moves the insertion point to the next cell to the right on the same row. A) Page Down B) Enter C) Ctrl D) Tab 29) If you wish to have a title on a table that spans across several cells, combine the cells by clicking on the Tables and Borders toolbar. A) Format B) Arrange C) Merge Cells D) Combine 30) The toolbar contains buttons to help you insert, format, and customize tables. A) Tables and Borders B) Tables C) Formatting D) Customize 24) 25) 26) 27) 28) 29) 30) 31) By default, a table aligns: 31) A) vertically. B) in the center of the document. C) justified.

4 D) at the left margin. 32) If you accidentally delete text and you need the text, immediately use the command to reverse the action. A) History B) Redo C) Undo D) Edit 33) If you type 87% into cell A4 and do not click any of the number format buttons, the contents of cell A4 will be displayed as: A) 87 B) 8700 C) 87% D).87 32) 33) 34) Before you increase the font size of a label entered in cell B4, you must: 34) A) increase the width of the cell. B) increase the height of row 4. C) increase the width of the column. D) select cell B4. 35) You will not see the two-headed arrow in view. 35) 36) If you wish to insert a table within a document, click on the Standard toolbar. 36) 37) The button on the Formatting toolbar is used to change the background color of a cell. A) Highlight Color B) Fill Color C) Font Color D) Background Color 38) If the value 1.25 is entered into cell A1 and the cell is formatted to display only whole numbers and no decimals, what value will be used if cell A1 is referenced in a formula? A) 1.2 B) 1.25 C) 1 D) 2 37) 38) 39) A point is approximately of an inch. 39) A) 1/32 B) 1/72 C) 1/15 D) 1/12 40) If you want a label to display on two lines within one cell, you must select the option of the Format Cells dialog box. A) Wrap text B) Shrink to fit C) Orientation horizontal D) Orientation vertical 40) 41) The default font in an Excel worksheet is: 41) A) Arial. B) Courier. C) Sans Serif. D) Times New Roman. 42) The button on the standard toolbar is used to change the color of the data displayed in a cell. A) Forward Color B) Fill Color C) Font Color D) Highlight Color 43) To copy the formatting that has been applied to cell A1 and apply it to cell G3, you should select cell A1, click the button, then select 42) cell 43) G3.

5 A) Copy B) Format Painter C) Duplicate D) Format 44) Which of the following is NOT a font attribute that can be applied using a button from the Format toolbar? A) Kernelling B) Italic C) Bold D) Underline 45) Using a will allow you to display only those rows that meet a specified condition. A) database B) visual constraint C) filter D) sort sequence 46) A table contains, which are lines that separate cells within a table. A) drawing objects B) blocks C) gridlines D) boxes 47) A(n) is a graph that is stored in the same worksheet as the data it represents. A) linked chart B) ingrained chart C) embedded chart D) immersed chart 48) Excel uses to help you analyze groups of related data stored in consecutive columns and rows. A) fields B) records C) data D) lists 49) A is a chart in which each piece represents a data segment and its relationship to the whole. A) trend analysis chart B) line chart C) pie chart D) column chart 50) If you are looking at a chart that uses various symbols to represent different data, use the to determine which symbol is associated with each data series. A) graph B) axis C) legend D) series 51) After developing a presentation, you can enhance it by adding all of the following EXCEPT: A) charts. B) drawn objects. C) animation. D) database features. 44) 45) 46) 47) 48) 49) 50) 51) 52) The view shows the slides as a series of thumbnails. 52) A) Web B) Master C) Slide Show D) Slide Sorter 53) The Normal view is divided into three sections that are referred to as: 53) A) tabs. B) areas. C) boxes. D) panes. 54) Which pane allows you to add text, graphics, or other objects to the slide? 54)

6 A) Normal B) Tabbed C) Notes D) Slide 55) Which of the following is NOT a view in which you can see your presentation? A) Normal B) Slide Show C) Slide Sorter D) Outline 55) 56) You can switch between views in PowerPoint by: 56) A) clicking the down arrow on the Change View button on the Standard toolbar. B) activating the Change View task pane. C) pressing the Alt + Tab keys. D) click the View button in the lower left corner of the PowerPoint window. 57) Markers used to identify your ideas in a list are: 57) A) circles. B) flags. C) bullets. D) dots. 58) To whiten a screen so the slide does not distract the audience while the speaker is talking, press. 58) 59) What is the name of the Wizard that will assist you in quickly creating a presentation that includes sample content? A) AutoContent B) New presentation C) AutoPresentation D) AutoContent Presentation 59) 60) Match the buttons to their names: 60) A. Decrease Decimals B. Merge and Center C. Font Size D. Center E. Increase Decimals

7 COMP100 MID-TERM 2 ANSWERS (Gr.1: A-İ) 1) D 2) B 3) C 4) B 5) A 6) C 7) EBCDIC 8) A 9) A 10) cache 11) A 12) C 13) A 14) short menu 15) D 16) B 17) C 18) B 19) hyperlinks 20) check mark 21) B 22) A 23) Paste Options 24) C 25) A 26) D 27) B 28) D 29) C 30) A 31) D 32) C 33) C 34) D 35) Normal 36) Insert Table 37) B 38) B 39) B 40) A 41) A 42) C 43) B 44) A 45) C 46) C 47) C 48) D 49) C 50) C 51) D

8 52) D 53) D 54) D 55) D 56) D 57) C 58) W 59) A 60) C, D, B, E, A