SMP connectors. the easy connection. Products overview. Applications
|
|
- Dominick Hill
- 6 years ago
- Views:
Transcription
1 Products overview PCB mount SMD mount plug and Centre pin in SMD, BGA or throughhole configurations Surface mount technology plug and Centre pin in SMD, BGA or throughhole configurations Bulkhead mount Cable mount Straight and right angle jacks Semi-rigid and semi-flexible UT 47, UT 85 Adapters 25 mm Adapter length from 6.75 to 24.2 mm for PCB distance from 9.8 to 27.2 mm 20 mm 15 mm 10 mm 5 mm Applications The features of the SMP from IMS Connector Systems make them uniquely suited for establishing RF interconnects between closely spaced printed circuit boards (PCBs) in cellular base stations as well as between units in other of today s advanced electronics subsystems, such as Telematics, Baseband Systems and tomotive Systems. SMP the easy connection
2 Products overview PCB mount SMD mount plug and Centre pin in SMD, BGA or throughhole configurations Surface mount technology plug and Centre pin in SMD, BGA or throughhole configurations Bulkhead mount Cable mount Straight and right angle jacks Semi-rigid and semi-flexible UT 47, UT 85 Adapters 25 mm Adapter length from 6.75 to 24.2 mm for PCB distance from 9.8 to 27.2 mm 20 mm 15 mm 10 mm 5 mm Applications The features of the SMP from IMS Connector Systems make them uniquely suited for establishing RF interconnects between closely spaced printed circuit boards (PCBs) in cellular base stations as well as between units in other of today s advanced electronics subsystems, such as Telematics, Baseband Systems and tomotive Systems. SMP the easy connection
3 Technical specifications SMP from IMS Connector Systems Jack (Female) Male (mm) Plug (Male) A B C D Female (mm) F G H I ) E The SMP product line from IMS Connector Systems includes a full range of PCB plugs for SMD technology as well as for traditional throughhole mounting in and Limited Detent versions. The have been optimised for VSWR performance in a microstrip environment and feature excellent matching characteristics. A wide range of adapters, allowing PCB distances from 9,8 to 27,2 mm are available as well as cable plugs for semi-rigid, semi-flexible and flexible cables ) resilient, dim. to meet electrical and mechanical requirements Features Makes testing a snap Quality blind mate microwave Using a combination of one and one plug provides the advantage that the connecting adapter remains in a predictable position if the have to be de-mated for test or service purposes. Absorb tolerances between mating Replace complex float-mount coaxial interconnections without sacrificing performance Cost effective means of providing boardto-board connections with float-mount like functionality and are normally the of choice. They have similar RF performance in mated position. Ideal for base station electronics connections 4 Misalignment Electrical characteristics which provides slideon mating with the jack Tolerance absorbtion All connections between two units are made through male (plugs) fixed on the units, connected by a female-female (jack-jack) adapter - the so called bullet. This ensures the unique properties of tolerance absorbtion. A jack mated to a plug is able to absorb a deviation in unit distance along the axis of the of up to 0.3 mm. which provides snap-fit mating with the jack 0,3 mm Due to the design of the interface, a mated pair of jack-plug SMP will yield satisfactory performance even if the axes of the two are misaligned as much as Ohm Working frequency DC - 12 GHz Depending on connector type Engagement force VSWR-value f (GHz), typ. Angle connector semi-rigid cable f (GHz), typ. 500 V RMS / 50 Hz Working voltage 335 V RMS / 50 Hz 9 N max 9 N min 2.2 N min Mating cycles > 500 > 1000 Misalignment, RF leakage Insulation resistance 45 N max Separation force Straight connector semi-rigid cable Proof voltage In order to fully explore the advantages of relaxed alignment when inserting an adapter slightly off-centre into the plug, a special version of the plug is used with a flared entry which provides a wide guide-in range. In some markets this feature is known as Catcher s mitt. Mechanical characteristics Impedance - pair > _ 5 GOhm Contact resistance Centre contact < _ 6 mohm Outer contact <_ 2 mohm Contact current 1.2 A DC Admissible power Application specific Environmental Angular misalignment < 4 Axial misalignment < 0,25 mm Materials BeCu Insulators PTFE, PEE, LCP Working temperature range -55 C C Relative humidity MIL-STD-202 Meth. 106 Plating Shock MIL-STD-202 Meth. 213 Vibration MIL-STD-202 Meth. 204 Temperature cycling MIL-STD-202 Meth. 107
4 Technical specifications SMP from IMS Connector Systems Jack (Female) Male (mm) The SMP product line from IMS Connector Systems includes a full range of PCB plugs for SMD technology as well as for traditional throughhole mounting in and Limited Detent versions. The have been optimised for VSWR performance in a microstrip environment and feature excellent matching characteristics. A wide range of adapters, allowing PCB distances from 9,8 to 27,2 mm are available as well as cable plugs for semi-rigid, semi-flexible and flexible cables. Plug (Male) A B C Female (mm) 1) 3.43 D E F G H I ) resilient, dim. to meet electrical and mechanical requirements Features Makes testing a snap Quality blind mate microwave Using a combination of one and one plug provides the advantage that the connecting adapter remains in a predictable position if the have to be de-mated for test or service purposes. Absorb tolerances between mating Replace complex float-mount coaxial interconnections without sacrificing performance Cost effective means of providing boardto-board connections with float-mount like functionality and are normally the of choice. They have similar RF performance in mated position. Ideal for base station electronics connections 4 Misalignment Electrical characteristics which provides slideon mating with the jack Tolerance absorbtion All connections between two units are made through male (plugs) fixed on the units, connected by a female-female (jack-jack) adapter - the so called bullet. This ensures the unique properties of tolerance absorbtion. A jack mated to a plug is able to absorb a deviation in unit distance along the axis of the of up to 0.3 mm. which provides snap-fit mating with the jack 0,3 mm Due to the design of the interface, a mated pair of jack-plug SMP will yield satisfactory performance even if the axes of the two are misaligned as much as Ohm Working frequency DC - 12 GHz Depending on connector type Engagement force VSWR-value f (GHz), typ. Angle connector semi-rigid cable f (GHz), typ. 500 V RMS / 50 Hz Working voltage 335 V RMS / 50 Hz 9 N max 9 N min 2.2 N min Mating cycles > 500 > 1000 Misalignment, RF leakage Insulation resistance 45 N max Separation force Straight connector semi-rigid cable Proof voltage In order to fully explore the advantages of relaxed alignment when inserting an adapter slightly off-centre into the plug, a special version of the plug is used with a flared entry which provides a wide guide-in range. In some markets this feature is known as Catcher s mitt. Mechanical characteristics Impedance - pair > _ 5 GOhm Contact resistance Centre contact < _ 6 mohm Outer contact <_ 2 mohm Contact current 1.2 A DC Admissible power Application specific Environmental Angular misalignment < 4 Axial misalignment < 0,25 mm Materials BeCu Insulators PTFE, PEE, LCP Working temperature range -55 C C Relative humidity MIL-STD-202 Meth. 106 Plating Shock MIL-STD-202 Meth. 213 Vibration MIL-STD-202 Meth. 204 Temperature cycling MIL-STD-202 Meth. 107
5 Technical specifications SMP from IMS Connector Systems Jack (Female) Male (mm) The SMP product line from IMS Connector Systems includes a full range of PCB plugs for SMD technology as well as for traditional throughhole mounting in and Limited Detent versions. The have been optimised for VSWR performance in a microstrip environment and feature excellent matching characteristics. A wide range of adapters, allowing PCB distances from 9,8 to 27,2 mm are available as well as cable plugs for semi-rigid, semi-flexible and flexible cables. Plug (Male) A B C Female (mm) 1) 3.43 D E F G H I ) resilient, dim. to meet electrical and mechanical requirements Features Makes testing a snap Quality blind mate microwave Using a combination of one and one plug provides the advantage that the connecting adapter remains in a predictable position if the have to be de-mated for test or service purposes. Absorb tolerances between mating Replace complex float-mount coaxial interconnections without sacrificing performance Cost effective means of providing boardto-board connections with float-mount like functionality and are normally the of choice. They have similar RF performance in mated position. Ideal for base station electronics connections 4 Misalignment Electrical characteristics which provides slideon mating with the jack Tolerance absorbtion All connections between two units are made through male (plugs) fixed on the units, connected by a female-female (jack-jack) adapter - the so called bullet. This ensures the unique properties of tolerance absorbtion. A jack mated to a plug is able to absorb a deviation in unit distance along the axis of the of up to 0.3 mm. which provides snap-fit mating with the jack 0,3 mm Due to the design of the interface, a mated pair of jack-plug SMP will yield satisfactory performance even if the axes of the two are misaligned as much as Ohm Working frequency DC - 12 GHz Depending on connector type Engagement force VSWR-value f (GHz), typ. Angle connector semi-rigid cable f (GHz), typ. 500 V RMS / 50 Hz Working voltage 335 V RMS / 50 Hz 9 N max 9 N min 2.2 N min Mating cycles > 500 > 1000 Misalignment, RF leakage Insulation resistance 45 N max Separation force Straight connector semi-rigid cable Proof voltage In order to fully explore the advantages of relaxed alignment when inserting an adapter slightly off-centre into the plug, a special version of the plug is used with a flared entry which provides a wide guide-in range. In some markets this feature is known as Catcher s mitt. Mechanical characteristics Impedance - pair > _ 5 GOhm Contact resistance Centre contact < _ 6 mohm Outer contact <_ 2 mohm Contact current 1.2 A DC Admissible power Application specific Environmental Angular misalignment < 4 Axial misalignment < 0,25 mm Materials BeCu Insulators PTFE, PEE, LCP Working temperature range -55 C C Relative humidity MIL-STD-202 Meth. 106 Plating Shock MIL-STD-202 Meth. 213 Vibration MIL-STD-202 Meth. 204 Temperature cycling MIL-STD-202 Meth. 107
6 Products overview PCB mount SMD mount plug and Centre pin in SMD, BGA or throughhole configurations Surface mount technology plug and Centre pin in SMD, BGA or throughhole configurations Bulkhead mount Cable mount Straight and right angle jacks Semi-rigid and semi-flexible UT 47, UT 85 Adapters 25 mm Adapter length from 6.75 to 24.2 mm for PCB distance from 9.8 to 27.2 mm 20 mm 15 mm 10 mm 5 mm Applications The features of the SMP from IMS Connector Systems make them uniquely suited for establishing RF interconnects between closely spaced printed circuit boards (PCBs) in cellular base stations as well as between units in other of today s advanced electronics subsystems, such as Telematics, Baseband Systems and tomotive Systems. SMP the easy connection
VITA 67 Series. Ideal For Blind Mate Applications. Electrical, Mechanical & Environmental Specifications
VITA 67 Series Delta Electronics Manufacturing Corp. introduces 4 position (VITA 67.1) and 8 position (VITA 67.2) RF connector housings designed for 3U and 6U formats within the OpenVPX architecture. Ideal
More informationOur Most Important Connection is with You. SECTION 3. Board-to-Board: MMBX / SMP-MAX R223 / R222M
SECTION 3 Board-to-Board: MMBX / R223 / R222M Contents MMBX Introduction... 3-4 Interface... 3-5 Characteristics... 3-6 Plugs... 3-7 PCB receptacles... 3-7 to 3-8 Adapters... 3-9 Demo board... 3-10 Panel
More informationConnectors. High Performance to 65 GHz. Applications. PDF Volume 1. Click Here for Table of Contents Click Here for Specifications
SMP/SMPM Applications DELTA ELECTRONICS MANUFACTURING CORP. Connectors High Performance to 65 GHz PDF Volume 1 Click Here for Table of Contents Click Here for Specifications (978) 927-1060 FAX (978) 922-6430
More informationSERIES MCX 50 MICRO MINIATURE CONNECTORS
SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications
More informationSeries PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
More informationOSMP Microminiature Push-On Coaxial Connectors
Introduction Features Intermateable with Gilbert GPO Series Enhanced performance features Simplified ssembly etween Series dapters For OSMP etween Series dapters, see Page 438. OSMP microminiature push-on
More informationSMP. Description. Compatibility. Content. Interface dimensions (mm/inches) SMP female. Interface dimensions conformable to the following standards:
Description Compatibility HUBER+SUHNER Astrolab connectors provide a robust, proven and fully compatible plug-in solution for applications up to 40 GHz. HUBER+SUHNER Astrolab connectors have been MIL-SPEC
More informationSMP / SMP-COM / SMP-MAX series R222
3 SMP / SMP-COM / SMP-MAX series R222 SMP-MAX INTRODUCTION BOARD TO BOARD SOLUTIONS The Best Systems Radiall s engineers work with your engineers allowing us to develop the best competitively priced misalignment
More informationGanged Board to Board SMP Solutions. Catalog. belfuse.com/cinch
Ganged Board to Board SMP Solutions Catalog belfuse.com/cinch SMP CONNECTORS One of the key benefits of the SMP connector interface is its use in high frequency blind-mate applications. The design of the
More informationSECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
More informationSMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
More informationGMS Interconnect Series Product Information
GMS Interconnect Series Product Information Microwave Products Product Features: Frequency range: DC up to 23 GHz, Force to engage/disengage: 10 ounces min./2.5 pounds max., Male connectors have full self-centering
More informationSMA SERIES COAXIAL CONNECTORS
General Information Features Part Number Index Applications Coupling types and interface mating dimensions Semi-rigid conformable cable connectors Flexible cable connectors Connectors for modules Bulkhead
More informationBoard-to-Board connections
Board-to-Board connections MBX/MFBX/MMBX connectors Edition 2014/08 Innovative connections Your partner for system solutions The HUBER+SUHNER Group is a leading global supplier of components and systems
More informationCannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationPrices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by Lighthorse Technologies, Inc.
Section Index Connectors Specifications... 93 Flexible Cable... 95 Panel Mount... 99 Bulkhead... 100 PCB Mount... 101 In Series Adaptors... 103 Other Information Assembly Instructions... 176 Cable Assembly...
More informationN Series Connectors Medium sized connector for high-voltage applications Suited for critical applications and environments Performance to 11 GHz (commercial) and 18 GHz (hi frequency) Intermateable with
More informationMating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationSMA - 50 Ohm Connectors
142-0701-621 4 142-0701-626 4 142-0701-631 4 142-0701-636 4 142-0701-701 7 142-0701-706 7 142-1701-011 5 142-1701-016 5 142-1701-031 4 142-1701-036 4 142-1701-041 5 142-1701-046 5 142-1701-121 5 142-1701-126
More informationMCX Connectors. Alphabetical Index. Johnson Components P.O. Box 1732 Waseca, MN Fax:
MCX Connectors Alphabetical Index 133-3701-201 3 133-3701-206 3 133-3701-211 3 133-3701-216 3 133-3701-221 3 133-3701-226 3 133-3701-231 4 133-3701-236 4 133-3701-301 5 133-3701-306 5 133-3701-311 5 133-3701-316
More informationMicrowave Gilbert Push-on Interconnects
Microwave Gilbert Push-on Interconnects Table of Contents Table of Contents Connect to Precision and Performance 4 Custom Designs 5 Corning Optical Communications RF LLC 6 Reference Guide 8 GPO Products
More informationSMA - 50 Ohm Connectors
Alphabetical Index 142-0701-201 4 142-0701-206 4 142-0701-231 4 142-0701-235* 4 142-0701-236 4 142-0701-301 5 142-0701-306 5 142-0701-335* 6 142-0701-421 5 142-0701-426 5 142-0701-491 5 142-0701-496 5
More informationCorona 70,000 Ft. Permeability Risetime Degradation (Mated Pair) 2.0 max MH z
NDL Ultraminiature Triaxial Connectors Connector Specifications Interface Dimensions Ø.020 Ø.082 Ø.168 Ø.162 Electrical Specifications Dielectric Center contact to intermediate contact: 1000 Vrms min Withstanding
More informationTNC SERIES Miniature Coaxial Connectors
SERIES Miniature Coaxial Connectors FEATURES connectors, medium sized coaxial connectors with thread coupling, are designed for applications where extreme vibration is encountered.the increased rigidity
More informationThe Custom Interconnect Leader
7-16 Series.354.276.843.811 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: 50 ohms DC to 7 GHz 2,700 volts
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationApplications & Features, Type SSMP When using blind mate connectors in an application, careful consideration has to be given to choosing the right con
SSMP Push-On Connectors & Adapters THE SSMP (Sub-Sub-Miniature-Push-On) is a 1.7 mm connector, using solid dielectric interface. The connector is 70% of the size of the SMP and therefore allows even higher
More informationBoard Mount Connector Footprint Design Process
Board Mount Connector Footprint Design Process STEP 1: Connector Selection Series Force to Engage (Max) Max SB LD FD Freq. SMP 2.0 lbs 10 lbs 15 lbs 40 GHz SMPM 3.5 lbs N/A 8.0 lbs 65 GHz SMPS 3.0 lbs
More informationSSMP Interconnect Series
SSMP Interconnect Series INTRODUCTION Carlisle Interconnect Technologies (CarlisleIT) designed the SSMP connector product line to further improve package density of RF/Microwave systems. The SSMP interface
More informationSMA. Precision 26.5GHz Connectors
SMA Precision 26.5GHz Connectors SMA Precision Connectors SMA subminiature connectors are 50 ohm precision connectors initially designed for performance through 18GHz, however the standard interface is
More informationThe Custom Interconnect Leader
SC Series.337.307.040.003.085.194 MIN FLARE TO MEET GAGE TEST.276 MIN.549.781 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR:
More informationSMA Connectors Series
SMA Connectors Series Content Page Description.. 2 Interface Dimensions.. 2 Interface Dimensions in mm/inches.. 2 Characteristics. 3 Cable Connectors 4 PCB Connectors 11 Panel Receptacles.. 13 Adapter
More informationSECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
More informationSeries 3402 lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz
lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz Description HUBER+SUHNER gas discharge tube protectors make the best of the traditional spark gap protection principle for general
More informationSMA Series - Crimp Plug and Jack
Plug Features: SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance. These devices offer broadband performance with low reflection. These properties, along
More informationN Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount Bulkhead In Series Adaptors...
Section Index Connectors Specifications... 137 Flexible Cable... 139 Semi-Rigid Cable... 145 Panel Mount... 147 Bulkhead... 148 In Series Adaptors... 149 Other Information Assembly Instructions... 176
More informationSeries SMPM-T. Description. Compatibility. Content. Interface dimensions (mm/inches) SMPM-T male (pin contact), smooth bore
Series Description The is the smallest threaded open source connector on the market. Its unique and innovative combination of a MIL- STD-348 SMPM female interface connector together with a retractable
More informationType SMP Connectors Product Catalog
Type SMP Connectors Product Catalog Connectivity for SMP Connectors Table of Content Connectivity for Table of Contents PAGE Introduction....................................3-4 Specifications...................................5-8
More informationPERFORMANCE SPECIFICATION ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES SMA TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH POUND MIL-PRF-55339/48B w/amendment 1 15 June 2017 SUPERSEDING MIL-PRF-55339/48B 30 April 2015 PERFORMANCE SPECIFICATION ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES SMA TO SERIES
More informationVertical Launch Connectors
Microwave Farm s Vertical Launch Connectors are specially designed for solderless vertical PCB launch on test & measurement board. These connectors have excellent electrical transition performance up to
More informationVertical Launch Connectors
Microwave Farm s are specially designed for solderless vertical PCB launch on test & measurement board. These connectors have excellent electrical transition performance up to 26.5 GHz, 40 GHz,50 GHz &
More informationRF & MW Connectors RF & MW Adapters RF Connectivity. RF & MW Connectors
RF & MW Connectors - 2.4 mm Connectors - 2.92 mm(k) Connectors - Hermetic Seal (0.02 Glass Bead) - SMP Connectors - BMA Connectors - High Performance End Lanch Connectors - High Performance SMA Connectors
More informationndl-q & ndl-t SerieS CONNECTORS
ndl-q & ndl-t SerieS CONNECTORS TRIAXIAL CONNECTORS Interface Dimensions Mechanical & Environmental Specifications (Ø.168) Temperature Rating Corrosion -65 C to + 165 C MIL-STD-202 Method 101, Test Condition
More informationIn-Series and Between-Series Adapters SMA
Adapters SMA In-Series and Between-Series Adapters SMA If your choice of SMA Adapter is not shown in this section, please refer to the Table below to determine other possible locations. Should you not
More informationSECTION 7 SMA/SMA-COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 7 /COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents BMA Introduction... 74 Characteristics... 75 Plugs... 76 Jacks... 77 to 78 Receptacles...78
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More informationINCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7
More informationBMA. 1. Applications & Features, Specifications & Interface Dimensions 2. Connectors of Type BMA 3. Adapters to BMA
CONTENT BMA INTRODUCTION to CONNECTORS & ADAPTERS Page 9 7/16 Page 15 N BMA Page 45 SBX SBY Page 61 Page 85 1. Applications & Features, Specifications & Interface Dimensions 2. Connectors of Type BMA 37
More informationProduct Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
More informationPRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
More informationSeries 3400 lightning EMP protectors Quarter-wave stub technology
Series 3400 lightning EMP protectors Quarter-wave stub technology Description HUBER+SUHNER quarter-wave lightning EMP protectors offer the best lightning protection available in the market, as they form
More informationREFERENCE PLANE Referenzebene
1Series RPC- 2.92 Interface Dimensions Series RPC-2.92 (code 02) D REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene D A E B C F F C B E A MALE Stecker FEMALE Kuppler Series RPC-2.92 Male Stecker
More informationSMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data
SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for
More information2.92mm (SMK) Connectors
2.92mm (SMK) Connectors Catalog belfuse.com/cinch The Johnson 2.92mm Connector provides an excellent solution for demanding applications requiring high frequency transmission. Although similar to the SMA
More information11525A 11524A
8 Typical Configuration 11900A 11901A 11904A 8059A 1250-1159 1250-1748 85058-60007 11900C 11901C 11901D 11904C 11904D 8059C 1250-1462 85058-60009 1190A 1250-166 1250-174 11525A 11524A 11852B 11852B Option
More informationPLATINUM SERIES R PART NUMBER SELECTION. High performance SPDT up to 40 GHz. Our Most Important Connection is with You. SMA - SMA 2.
PART NUMBER SELECTION Frequency Range: 3: SMA up to 6 GHz 4: SMA up to 20 GHz F: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz Type: 3: Latching (1) 4: Latching + I.C. (1) 5: Latching + S.C.O. (1) 6: Latching
More informationQSL RF Connector System
QSL RF Connector System DESCRIPTION Coaxial Cable Insulation Displacement Interface Low profile Highly reliable ruggedized interface Surface mount technology Excellent price-to-performance ratio APPLICATIONS
More informationSuper Coaxial Micro-Plugs and Receptacles
The GigaLane s Super coaxial Micro-Plugs (SCMP) and Receptacles (SCMJ) are specially designed for Space Reduction on Circuit Boards and for Vertical Mounting on RF Boards. They have the excellent RF performance
More informationPERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE, JAM NUT MOUNTED, HERMETIC SEAL, CLASS 2)
INCH-POUND MIL-PRF-39012/14C 10 August 2016 SUPERSEDING MIL-PRF-39012/14B 18 September 1977 PERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE,
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HIGH POWER CONNECTORS Panel Mounts and Cord Plugs HPC Series Switchcraft
More informationSouthwest Microwave, Inc. Tempe, Arizona, USA +1 (480) mm (V) Series DC to 67.
The Performance Leader in Microwave Connectors 1.85 mm (V) Series DC to 67.0 GHz Connectors Supplement to Catalog Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480) 78-0201 infompd@southwestmicrowave.com
More informationAmphenol High Density HDB 3 /HSB 3 Connectors
Amphenol HDB 3 /HSB 3 Connectors TABLE OF CONTENTS Amphenol HDB 3 and HSB Connectors 3 Table of Contents..............................45 Introduction - Features, Options, Performance...............................
More informationSUBMINIATURE SERIES R 591. SUBMINIATURE SPnT up to 40 GHz. Our Most Important Connection is with You. SMA SMA 2.9 QMA
PART Number Selection RF Connectors: 3: SMA up to 6 GHz 7: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz (6) E: QMA up to 6 GHz (5) Type: 0: Normally open 2: Latching, global reset 6: Latching, separated
More informationLabs. Introduction. Application Notes
Introduction Application Notes Florida RF has provided an extensive collection of Application Notes in this section to help designers select and specify cable assemblies. These Application Notes cover
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
More informationProduct Performance Specification Mini Coaxial Connector
Product Performance Specification Mini Coaxial Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Coaxial connector and connector system.
More informationPRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
More informationProduct Specification
MCX Jack, Straight Orientation, Through-hole MCX Plug, Straight Orientation, Through-hole Other configurations available for: Vertical and right angle cable-to-board applications Through-hole, surface
More informationAXOMACH E-16. High data rate links for faster data transmission. Microwave coaxial cables. Panel mount connector QUASI-FLEX. Cable mount connector 2
AXOMACH High data rate links for faster data transmission AXON proposes AXOMACH, a range of high data rate links composed of low loss microwave coaxial cables and different connector types: AXOMACH Micro-D
More informationFeatures wideband, 10 to 4200 MHz low insertion loss, 0.6 db typ. feed through terminal per DC port
Coaxial Bias-Tee 50Ω Wideband 10 to 4200 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Power Voltage at DC port Input Current DC resistance from DC to RF&DC
More informationLabs. Introduction. Application Notes
Introduction Application Notes Florida RF has provided an extensive collection of Application Notes in this section to help designers select and specify cable assemblies. These Application Notes cover
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
More informationN1810/1/2 Coaxial Switches
TECHNICAL OVERVIEW N1810/1/2 Coaxial Switches High Performance Electromechanical Switches for Microwave and RF Manufacturing Test Systems Introduction Key Features Insertion loss repeatability: 0.03 db
More informationSEMS-4080-SP12T-SMA DATA SHEET
SP12T Latching Electro-Mechanical Relay Switch From DC to 12.4 GHz, 120 Watts with Self Cut Off, Auto Reset, Indicators, Diodes, SMA SEMS-4080-SP12T-SMA The SEMS-4080-SP12T-SMA is an SP12T Terminated Electromechanical
More informationSPDT up to 50 GHz Pc Board - SMA - SMA mm - QMA - SMC - SMB - mini SMB - DIN 1.6/5.6 R Actuator Voltage: 2: 12 Vdc 3: 28 Vdc
SPDT up to GHz Pc Board - SMA - SMA2.9-2.4mm - QMA - SMC - SMB - mini SMB - DIN 1.6/5.6 Radiall s RAMSES SPDT switches offer excellent reliability, high performance and operating frequencies from DC to
More informationQUALIFICATION TEST REPORT
QUALIFICATION TEST REPORT FOR CARLISLE IT P/N: P317GD8-1CC (CGB4PS08VL00) and P186GD8-1CC (CGC4RS08236) DATE CODE: 1541, 1542 WO: 1260651, 1261323 SSMP MALE, 8 POSITION, PCB VERTICAL MOUNT CARLISLE INTERCONNECT
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
More informationPAGE 1/6 ISSUE SERIES Micro-SPDT PART NUMBER R516 X3X 10X R 516 _ 1 0 _
PAGE 1/6 ISSUE 13-08-18 SERIES Micro-SPDT PART NUMBER R516 X3X 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT TECHNOLOGY
More informationOne mm SMT for Board-to-Board
E L E C T R O N I C C O N N E C T O R S One27 mm SMT for Board-to-Board 30 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Contents Introduction 32
More informationAirBorn Inc Your High-Reliability Interconnect Solutions Provider
AirBorn Inc. 2016 Your High-Reliability Interconnect Solutions Provider In today s data driven marketplace, OEMs must maintain agility to deliver solutions faster & more efficiently than ever before You
More informationAMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
More information2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays
.6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available
More informationConnectors DIN 41612/IEC
Connectors DIN 41612/IEC 60603-2 and completions General information The DIN 41612/IEC 60603-2 connector family consists of 13 basic sizes and many complementary versions. It was developed for use in 19"
More informationProduct Specification
SLH Series Socket, Vertical Orientation TLH Series Terminal, Vertical Orientation See www.samtec.com for more information. Page 1 1.0 SCOPE 1.1 This specification covers performance, testing and quality
More informationSEMS-4069-DPDT-K DATA SHEET
Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 10 Watts with Indicators, Self Cut Off, 2.92mm The SEMS-4069-DPDT-K is a Transfer Electromechanical Relay Switch that operates over
More informationSEMS-4066-DPDT-SMA DATA SHEET
Transfer Latching Electro-Mechanical Relay Switch From DC to 18 GHz, 100 Watts with Indicators, TTL, Self Cut Off, SMA The SEMS-4066-DPDT-SMA is a Transfer Electromechanical Relay Switch that operates
More informationDT Connectors. Features. Connector
DT Connectors DEUTSCH DT Series connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements, lower cost, and design flexibility.
More informationUltra-Small Surface Mount Coaxial Connectors mm Mated Height
All non- products have been discontinued, or will be discontinued soon. the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Ultra-Small
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More informationSpace Connectors. Your Connection to the Future
Space Connectors Your Connection to the Future SPACE CONNECTORS OVERVIEW Space Approved Connectors DTL-38999 twinax, and blindmate twinax connectors. Our space level triax connectors feature Sabritec's
More informationR Actuator Terminals: 0: Solder pins 5: D-Sub connector
Terminated and non Terminated up to 40 GHz SMA - SMA2.9 - QMA - DIN 1.6 / 5.6 COAXIAL RADIALL R573 & R574 multithrow coaxial switches are offered in many configurations (over 40,000 possible possible combinations)
More informationHigh-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
More informationRight angle press-fit D-Sub connectors
Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN
More informationMicro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
More information0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors
NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1
More informationSEMS-4052-SPDT-SMA DATA SHEET
SPDT Latching Electro-Mechanical Relay Switch From DC to 18 GHz, 100 Watts with Indicators, Self Cut Off, SMA The is an SPDT Electromechanical Relay Switch that operates over a wide frequency band from
More informationThe Series 79 Micro-Crimp Connector
The Series 79 Micro-Crimp Connector Covered in This Session 1. The architecture of the MicroCrimp connector, including supported contacts, layouts, and connector styles. 2. The purpose for blind-mate applications.
More informationSYSTEM CONNECTORS FOR W-CDMA
SYSTEM CONNECTORS COMPLINT WITH EIJ RC-5238 (CONNECTOR FOR IMT-2000 MOBILE PHONES) SYSTEM CONNECTORS FOR W-CDM Receptacle Signal 10 contacts with coaxial, with charging terminals ( type) Plug Signal 10
More informationFISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
More informationHan PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
More information