Cable tray systems. 04 KTS Masterkatalog Länder / en / 25/10/2016 (LLExport_04366) / 25/10/ Always indicate the item number when ordering.
|
|
|
- Joel Rice
- 5 years ago
- Views:
Transcription
1 Cable tray systes 62
2 Cable tray KRS 64 Accessories KRS 68 6
3 , side Cable tray KRS, side KRS 00 FS KRS 020 FS KRS FS KRS 040 FS KRS 050 FS KRS 060 FS Width Useful ength crosssection c² kg/ 485,670 68, ,040 96, ,970.29,940 Ite No / 7 x 2 The cable tray has connector perforations on both sides. Straight connectors should be ordered separately and in the appropriate quantity. Heavy-duty, walkable cable tray syste KRS with base perforation, in side. Magnetic shield insulation without cover 20 d, with cover 50 d x00 (=00) H Diensions KRS 00 FS KRS 020 FS KRS FS KRS 040 FS KRS 050 FS KRS 060 FS Diension Di Installation Floor ounting Support spacing in Approx. load in N KRS KRS KRS * KRS * KRS * KRS * Testing based on DIN EN Installation on support bracket Support spacing in Approx. load in kn/ KRS ,9 KRS ,6 KRS.2 4.2* KRS * KRS * KRS * Support eleent, type STE KS FS, fro 400 width Installation on Z profile Support spacing in Approx. load in kn/ KRS ,9 KRS ,6 KRS.2 4.2* KRS * KRS * KRS * *In order to archive the axiu peritted load, Z-shaped barrier strips ust be placed in cable trays > 200. The distance between the barrier strips ust not exceed
4 , side RV 85 FS 85 0 Including appropriate fastening aterial. Straight and angle connector for cable trays and fittings with a side of 85. Straight and angle connector kg/. Ite No., Straight and angle connector RV FS 0 kg/. Ite No. 2, Including appropriate fastening aterial. Straight and angle connector for cable trays and fittings with a side of. arrier strip, Z for, side TSGZ KRS FS ength kg/ Ite No. 28, / arrier strip for the KRS walkable cable tray syste. Attachent with truss-head screws M6 x 2 in the base perforation. H 7 x 0 FRS 6X2 G Di. Di. d Di. D Diension M 6 x Truss-head bolt with flange nut kg/. Ite No. 0, / pc. G Electrogalvanised For universal fastening of construction coponents. Peritted use of the article only in dry atospheres. Hot galvanised truss-head bolt with square neck including electrogalvanised flange nut. Reducer/stop-end RWE 00 FS RWE 020 FS RWE FS RWE 040 FS RWE 050 FS RWE 060 FS Width Including appropriate fastening aterial. Reducer/stop-end for cable trays with side. kg/. Ite No., , , , , , 782 2,5 7 x
5 , side 0 Cable tray KRS, side 0 KRS 0 FS KRS 20 FS KRS 0 FS KRS 40 FS KRS 50 FS KRS 60 FS Width Useful ength crosssection c² kg/ 52, , ,000 97,670.2,000.0,40 Ite No / 7 x 2 The cable tray has connector perforations on both sides. Straight connectors should be ordered separately and in the appropriate quantity. Heavy-duty, walkable cable tray syste KRS with base perforation, in 0 side. Magnetic shield insulation without cover 20 d, with cover 50 d x00 (=00) H Diensions KRS 0 FS KRS 20 FS KRS 0 FS KRS 40 FS KRS 50 FS KRS 60 FS Diension Di Installation Floor ounting Support spacing in Approx. load in N KRS KRS KRS * KRS * KRS * KRS * Testing based on DIN EN Installation on support bracket Support spacing in Approx. load in kn/ KRS 0.2 4,9 KRS ,6 KRS * KRS 40.2,2* KRS * KRS * Support eleent, type STE KS FS, fro 400 width Installation on Z profile Support spacing in Approx. load in kn/ KRS 0.2 4,9 KRS ,6 KRS * KRS * KRS * KRS * *In order to archive the axiu peritted load, Z-shaped barrier strips ust be placed in cable trays > 200. The distance between the barrier strips ust not exceed
6 , side 0 RV 0 FS 0 0 Straight and angle connector kg/. Ite No., Including appropriate fastening aterial. Straight and angle connector for cable trays and fittings with a side of 0. arrier strip, Z for, side 0 TSG0Z KRS FS Di Diension H kg/ Ite No. 240, / arrier strip for the KRS walkable cable tray syste. Attachent with truss-head screws M6 x 2 in the base perforation. H 7 x 0 Truss-head bolt with flange nut FRS 6X2 G Di. Di. d Di. D Diension M 6 x kg/. Ite No. 0, / pc. G Electrogalvanised For universal fastening of construction coponents. Peritted use of the article only in dry atospheres. Hot galvanised truss-head bolt with square neck including electrogalvanised flange nut. Reducer/stop-end RWE 0 FS RWE 20 FS RWE 0 FS RWE 40 FS RWE 50 FS RWE 60 FS Width kg/. Ite No. 6, , , , , , Fro a width of 50, the perforated lower flange is provided. Including appropriate fastening aterial. Reducer/stop-end for cable trays with side x x 2 67
7 Accessories 60,, 0 Cover with chequer plate and turn buckle, turn buckle spacing 500 5x500 (=2500) DF KR0 FS A DF KR20 FS A DF KR0 FS A DF KR40 FS A DF KR50 FS A DF KR60 FS A Diension Di kg/ Ite No. 2, , , , , , Alu/St Aluiniu/Steel / Cable tray cover for the walkable cable KRS cable tray syste. The basic cover is strip galvanised in a aterial of 2 with additional aluiniu chequer riveted on in a of 4, sturdy and non-slip. Turn buckle fastening with a turn buckle distance of 500. When using covers outdoors, additional easures against the influence of wind ust be taken. Cover claps orturn buckles on their own are not sufficient securing eleents against wind loads. Cover with chequer plate and turn buckle, turn buckle spacing,000 Diension Di DF KR0 0 FSA kg/ 4,570 Ite No DF KR20 0 FSA , DF KR0 0 FSA , DF KR40 0 FSA , DF KR50 0 FSA , DF KR60 0 FSA , Alu/St Aluiniu/Steel / Cable tray cover for the walkable cable KRS cable tray syste. The basic cover is strip galvanised in a aterial of 2 with additional aluiniu chequer riveted on in a of 4, sturdy and non-slip. Turn buckle fastening with a turn buckle distance of 0. When using covers outdoors, additional easures against the influence of wind ust be taken. Cover claps orturn buckles on their own are not sufficient securing eleents against wind loads. Cover with chequer plate and turn buckle, turn buckle spacing, Diension Di. DF KR00 4FSA kg/ 24,000 Ite No DF KR200 4FSA , DF KR00 4FSA , DF KR400 4FSA , DF KR500 4FSA , DF KR600 4FSA , Alu/St Aluiniu/Steel / Cable tray cover for the walkable cable KRS cable tray syste. The basic cover is strip galvanised in a aterial of 2 with additional aluiniu chequer riveted on in a of 2, sturdy and non-slip. Turn buckle fastening with a turn buckle distance of 0. When using covers outdoors, additional easures against the influence of wind ust be taken. Cover claps orturn buckles on their own are not sufficient securing eleents against wind loads. 68
8 Accessories 60,, 0 Turn buckle DR FT FT Hot-dip galvanised Single-sided turn buckle. Use for cover widths of 600. Turn buckle for additional installation or installation at a later date. 20 kg/. Ite No., Dust protection eleent SSE KR FS SSE KR 200 FS SSE KR 00 FS SSE KR 400 FS SSE KR 500 FS SSE KR 600 FS Diension kg/. Ite No., , , , , , Dust protection eleent for the insertion between aluiniu chequer plate and basic cover in KRS walkable cable tray systes providing protection against dust, chips, etc. 40 Cover support, side 0 DST0 KRS FS 09 0 kg/. Ite No. 0, Cover support for the walkable KRS cable tray syste, for additional support of covers and fitting covers at a side of Stand-off bracket STA KS0 FT STA KS20 FT STA KS0 FT STA KS40 FT STA KS50 FT STA KS60 FT Diension Diension b b2 Diension kg/. Ite No. 69, , , , , , FT Hot-dip galvanised Stand-off bracket for holding up the KRS cable tray syste fro the floor. b b2 S KS FS ength Height Thickness kg/ Ite No. 9, / Collision guard, to be attached at the side as a collision guard for the walkable KRS cable tray syste. The side is Protective panel
9 l k Accessories 60,, 0 Truss-head bolt FRS 6X2 G Di. Di. d Di. D Diension M 6 x kg/. Ite No. 0, / pc. G Electrogalvanised For universal fastening of construction coponents. Peritted use of the article only in dry atospheres. Hot galvanised truss-head bolt with square neck including electrogalvanised flange nut. Support profile, side 0 9 x 20 7 x 5 STP Z 00 FS STP Z 020 FS STP Z FS STP Z 040 FS STP Z 050 FS STP Z 060 FS STP Z 0 FS Di kg/. Ite No. 22, , , , , , , / Support profile for holding up the walkable cable tray syste KRS fro the floor. Installation ust be perfored on both sides of the Z profile during the process of securing the syste so that it is held up. Anti-slip strip ARS KR kg/ Ite No. 0, GUM Rubber / Self-adhesive, anti-slip strip to stick onto the Z barrier strip in walkable cable trays, for securing laid-on but not yet attached covers. Drilling screw dk S KS KP Diension M4, 2 x 6 kg/. Ite No. 0, dp d G Electrogalvanised Drilling screw according to DIN / pc. Earthing terinal EK 25 M6 EK 5 M6 Cross section SW ² Thread Accessories 25 8 M6 5 2 M kg/. Ite No., , CuZn rass / pc. Earthing screw for fastening the equipotential bonding wire to the cable support syste. 70
10 Accessories 60,, 0 Equipotential bonding rail for sall systes 809 G CuZn rass Cover hood ade of polystyrene, grey ase plate ade of strip galvanised steel Contact strip and screws ade of nickel-plated brass kg/. Ite No. 9, Connection options: x ulti-core cables to 6 ² 2 x ulti-core cables to 6 ² 7
CABLE TRAY SYSTEM 234
CALE TRAY SYSTEM 234 235 WALKALE CALE TRAY SYSTEM Heavy Duty Cable Tray solid, splice plate not included S RSUS 110.100OV 110/4,3 100/3,9 2 S RSUS 110.200OV 110/4,3 200/7,8 2 S RSUS 110.300OV 110/4,3 300/11,7
Service poles for industrial applications
Service poles for industrial applications Ready to go. The ISS basic profile Our industry service poles bundle power, data and compressed air in a compact and robust manner. This means relocations, for
Cable ladder systems. Cable ladder system 60. Cable ladder LG 60 NS. Always indicate the item number when ordering.
knm knm knm knm borders LG 6 NS 0 1.5 00 2.25 1.5 1.0 0.4 253.800 68 50 6 LG 6 NS 0 1.5 00 2.25 1.5 1.0 0.4 268.000 68 50 9 LG 640 NS 400 1.5 00 2.25 1.5 1.0 0.4 282.0 68 51 2 LG 650 NS 500 1.5 00 2.25
10. EMC accessories. Chapter. EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips Cable clips 10.
10. EMC accessories Chapter EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips 10.11 Cable clips 10.13 More Informations about cabinet wiring with LÜTZE LSC AirSTREAM:
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
W DATA SHEET: FREE-STANDING DATA ENCLOSURES DS
W DATA SHEET: FREE-STANDING DATA ENCLOSURES DS w TECHNICAL DATA Welded powder-coated sheet steel skeleton Heights: 15, 18, 22, 27, 32, 37, 42, 45 and 47 U Widths: 600 and 800 mm Depths: 400, 600, 800,
Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP SIMBOX 63 /4 Introduction /5 Flush mounting distribution boards /6 Hollow-wall distribution boards /7 Surface mounting distribution boards /7 Hood-type
Product catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,
Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module
Hot dipped, galvanised steel (pre-galvanised) Supplied in 3 metre lengths Return flanged, perforated tray 50MM 75MM 100MM 150MM 225MM 300MM 450MM
Steel Cable Tray Light Duty Cable Tray Medium Duty Tray Hot dipped, galvanised steel (pre-galvanised) Supplied in 3 metre lengths Single flanged, perforated tray Hot dipped, galvanised steel (pre-galvanised)
Reduces installation time Locks tray into position - no hardware required
Tablok Profile Reduces installation time ocks tray into position - no hardware required TabokSystem Drastically reduce installation time with the Tabok profile. Used to mount tray on walls, floors and
نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - The complete support for your inspection. Martool The latest information on MARTool products can be found on our website: www.mahr.com, WebCode 10436-5062 MarTool measuring and inspection
Dimensions in mm in mm in. R in mm in mm mm. Weight. Dimensions in.
Wall Termination / Universal Blind End 1.950 in. 49.53 mm 0.463 in. 11.76 mm 1.00 in. 25.4 mm 0.75 in. 19.05 mm 9.50 in. 241.3 mm R 0.156 in. 3.962 mm 1.962 in. 49.83 mm 0.367 in. 9.322 mm 0.962 in. 24.43
Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
SYSTEM WORLD PRODUCT INFO
SYSTEM WORLD PRODUCT INFO August 208 System case.. System Case Configuration.. Width x depth x height (inches).56 x 0.62 x 3.3 inches Number of System Boxes Material Lid Type Art. No. Empty* ABS Black
WEIGHING PLATFORMS. Trade, commerce and industry. Product Numbers 2816, 2817, 2818, 2822
WEIGHING PLATFORMS Product Numbers 2816, 2817, 2818, 2822 Trade, coerce and industry > Weighing platforms for floor scales > Sturdy, flat design > With stainless steel, painted or hot-dip galvanised >
OZLINX Solutions Australia Pty Ltd 21 Ayton Street, Sunshine North, Melbourne VIC3020 Australia Ph: Fax:
OZLINX Solutions Australia Pty Ltd 21 Ayton Street, Sunshine North, Melbourne VIC3020 Australia Ph: +61 3 93102440 Fax: +61 3 93102441 www.ozlinx.com OZLINX Cabinets OZLINX Cabinets OZLINX cabinets combine
Argenta W A L L M O U N T I N G M E T A L C A B I N E T S
Argenta W A L L M O U N T I N G M E T A L C A B I N E T S The ARGENTA Series is a group of metal enclosures used to house on the inside electrical or electronic switchgear, controlgear and equipment necessary
323E L/LN Hydraulic Excavator
E L Diensions All diensions are approxiate. 9 8 0 Reach Boo. VA Boo Stick R.9B R.B R.9B R.B Shipping Height without Guard Rail* 0 080 90 00 Shipping Height with Guard Rail 0 0 0 0 Shipping Height with
Connect Electricians' tools, consumables and enclosures
Connect Electricians' tools, consumables and enclosures 220 Tooling and consumables including electricians' hand tools, electrical insulation tapes, cable pulling socks, morse hole saws & accessories
PROline Floor Marking Tape, 50mmW Product description page 3. PROline Floor Marking Tape, 75mmW Product description page 3
PROline Floor Marking Tape, 50mmW Product description page 3 33m long, Tape width 50mm white 261.16.606 yellow 261.13.796 blue 261.19.771 red 261.13.752 green 0.5 261.18.249 orange 261.16.322 red/white
All prices in CHF, excl. taxes, ex works Solothurn, payment within 30 days net
Price list 2018 Standard program Magnetic holding devices Dial test indicator holder Selecting magnet Demagnetizer Holding and sticking magnets Rubber magnets Conditions: Delivery terms: All prices in
The cable tray system KP EBO Systems (manufactured by pultrusion) provides maximum fl exibility and effi ciency and a support distance of up to 4 m.
CALE TRAY SYSTEM GFK KP KSystem KP Cable tray systems available in height 50 80 110 Cable trays Dividers Covers Accessoires Fittings 54 The cable tray system KP EO Systems (manufactured by pultrusion)
pro du c t n ote System pro E control IS2 New Range Extension H1400 and H1600
pro du c t n ote System pro E control IS2 New Range Extension H1400 and H1600 2 System pro E control IS2 New Range extension H1400 and H1600 System pro E control IS2 New Range Extension H1400 and H1600
Robust Clamps Shock-proof load range
Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific
T&B Cable Tray. Metallic Channel Tray. Accessories. Standard 1.5 in. Splice Plate. Standard Splice Plate. Expansion Splice Plate
Standard 1.5 in. Splice Plate (Prefix)-W-01-CCS 1.5 Supplied standard with each length. Including hardware, 2 bolts, 2 washers 3/8 in. diameter. Standard Splice Plate (Prefix)-W-03-CCS 3 (Prefix)-W-04-CCS
322C L Hydraulic Excavator Dimensions All dimensions are approximate.
Diensions All diensions are approxiate. Boo Options Reach Reach Reach Mass Long Reach.9 (9'").9 (9'").9 (9'"). ('"). ('") Stick Options R.B ('") R.9S (9'") R.S ('") M.D ('"). ('9") Tail swing radius 9
PowerFlex 750-Series Power Option Cabinets
Installation Instructions PowerFlex 750-Series Power Option Cabinets Topic Page Introduction 1 Additional Resources 2 What the Kits Contain 2 Bus-bar Selection Tables 4 Approximate Dimensions 8 Remove
Channels and Bracketery
Channels and Bracketery Channel Sections and Cantilever Arms CSS1/ CSS1/ CSS1/ CSS1/ CSS1 CSS1 CS1/ CS1/ CS1/-HDG CS1/-SS CS1/ CS1/ CS1/-HDG CS1/-HDG CS1/-SS CSL1 Material thickness: 1.mm Weight: 1.1 kg/m
Title page. GES R2 floor sockets. 08 UFS GESR2 2016_mit Produkte / en / 07/11/2016 (LLExport_04391) / 07/11/2016. System information
Title page GES R2 floor sockets 08 UFS GESR2 206_mit Produkte / en / 07//206 (LLExport_0439) / 07//206 System information GES R2 floor sockets The round floor sockets of the GES R2 series supply data and
Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks
Series A2000, LP2000 & C2000 Single Row Terminal A20510807WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG CU Screw Size:
From ultra-thin lead frames to iron sheets... Double feed detection of various metal sheets
1147 Detector SERIES Related Information General terms and conditions... F-7 General precautions...p.151 PHOTO PHOTO MEASURE ITY From ultra-thin lead frames to iron sheets... Double feed detection of various
Throughout this section there are various icons to help you with your product selection. Diameter STEEL
Icons Throughout this section there are various icons to help you with your product selection. Ø Diaeter STEEL Index Aluiniu Tread Plate... 433 Angles... 25 Black Annealed Tying Wire... 30 Black PVC Coated
From ultra-thin lead frames to iron sheets... Double feed detection of various metal sheets
1135 Detector SERIES Related Information General terms and conditions... F-3 General precautions...p.1595 PHOTO PHOTO MEASURE From ultra-thin lead frames to iron sheets... Double feed detection of various
Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry
36 Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry Assembly Assembly of modular terminal blocks to terminal strips Mounting of an end plate screw fixing CAGE
11. Wall and Floor Mounted Clips
11. Wall and Floor Mounted Clips The Flamco s BM range of wall mounted clips is designed for installing threaded tubes, sprinkler pipes, thin wall steel tubes and copper pipes. These one piece clips, complete
Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks. Terminal Blocks: Single Row. EuroMag Series.
Series A2000, LP2000 & C2000 Terminal locks A201108WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG Cu Screw Size: #6-32
Leg Systems & Fittings
Leg Systems & Fittings Product range: entre Pin Glides orner Plates Folding Legs Glides Height djusters Metal Height djusters Plastic Leg Plates Plastinails Single Wheel astors Table Legs Twin Wheel astors
Connect. Electricians' tools, consumables and enclosures x 210.0mm x 210.0mm. 26.0mm. 6.0mm. 6.0mm. 6.0mm. 12.0mm.
Connect Electricians' tools, consumables and enclosures Tooling and consumables which includes hand tools, crimping tools and solar tools for MC3 & MC4 connectors, electrical insulation tapes, cable pulling
Emergency stops and Pilot devices
Emergency stops and Pilot devices IMAGES DESIGNATION ARTICLE NUMBER DESCRIPTION INCA INCA 1 Tina 2TLA030054R0000 Emergency stop button for panel mounting, 22.5 mm holes, Tina adaption unit included for
Single action door patch fittings
Single action door patch fittings The flexible system for all installation situations. CONTENTS Technical details - 5 Materials and surface finishes Product information Patch fittings / none rebated frame
Fits 1 3/4" Resilient Rings. Part # Shaft Height A" 92-A /4" 4.4" 92-A /4" 4.6" Fits 2 1/2" Resilient Rings. Part # Shaft Height A"
Bases 48 Frame Resilient Mount Kit 92-A240 9" Blowers( 2 1/2" Rings) 92-A241 12" Blowers ( 2 1/2" Rings) 92-A242 10" Blowers (2 1/2" Rings) Accessories Base Mounting Adapter Kit For 5 1/2" with flat end
Multitronic. Technical data
Multitronic EMC Aluminium enclosure system for MCR technology Integrated guide grooves for PCB s External mounting slots with spring nuts Technical data Material: DIN EN 573 EN AW-AlMgSi Ingress protection:
ISOLATION RELAY RACK ISOLATION KIT 19 RACK MOUNT RELAY RACK ISOLATION KIT, SLOTTED UNEQUAL FLANGE RACK ISOLATION KIT 23 RACK MOUNT
ISOLATION Info: 9070 = Isolation RELAY RACK ISOLATION KIT 19 RACK MOUNT 9070-1019 19" Rack Mount 23 RACK MOUNT 9070-1023 23" Rack Mount RELAY RACK ISOLATION (KIT) RELAY RACK ISOLATION KIT, SLOTTED 19 RACK
MIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
Item No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
References. References. Rating (A) Référence
DIRECT OPERATION T O O R D E R EXTERNAL OPERATION picto_080_c_1_gb Switch body Direct Switch body + handle + Shaft + + OTHER ACCESSORIES External handle acces_128_a_1_cat acces_129_a_1_cat Direct handle
VEROTEC Electronics Packaging
VEROTEC Electronics Packaging Enclosure Enclosure Value Added Services from Verotec CUSTOM ENCLOSURE ACCESSORIES TecServ is the vehicle by which Verotec delivers its value added services. These fall within
PERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.
Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac
lindab duct suspension & support system Duct suspensions & Support systems
Duct suspensions & Support systems Content Duct suspensions & Support systems Duct suspension Duct suspension FB... UVH... 0 UVH0... 0 Threaded rod OSB 0...0 DRSN... 0 DRSNR... 0 Channels and channel brackets
ALPHA SIMBOX Small Distribution Boards
ALPHA SIMBOX Small Distribution Boards /2 Introduction /3 Introduction /4 Flush-mounting and hollow-wall distribution boards /5 Surface-mounting and hood-type distribution boards /6 Accessories /7 Dimensional
Accessories. Slide lock DVxxGx Manually operated slide locks Dimensions in mm. Lock bolt DV-B1/x for above slide locks Dimensions in mm
Slide lock DVxxGx Manually operated slide locks Dimensions in mm Dimensions A B width DV09Gx 36,0 25,0 11,0 DV15Gx 44,0 33,3 11,0 DV25Gx 58,0 47,0 11,0 DV37Gx 74,3 63,5 11,0 DV50Gx 73,8 61,1 13,6 ending
F O R U M S E R I E S
R E V.1 F O R U M S E R I E S INSTRUCTION BOOKLET MODELS FORUM 8, 10, 12, 15, 8M, 15M & FORUM 12SUB & 15SUB F O R T H E C L O S E S T A P P R O A C H T O T H E O R I G I N A L S O U N D TABLE OF CONTENTS
G SERIES GAS RANGE MATCH BROILER
G SERIES GAS RANGE MATCH BROILER models G18/24/30/36/48-BRL Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 361-7745 http://www.garland-group.com G_GMD_PL_RMBROILERSGSERIES_G-BRL
resistance for high requirement
HEVY DUTY FLOOR OXES >>> NEW High resistance for high requirement For highly frequented areas, requiring important mechanical resistance and/or washing down. heavy duty in-screed floor box s 896 83 896
Section 1 Specialty Profiles
Contents Basic Series 17-31 Section 1 Basic & Specialty Specialty 32x18 Frame 45-46 & End Caps 30 Series 32-35 Door Rolling Door Guide 47 Sliding Door Guide 48 28 Series 36- Panel Stiffener/Handle 49 Panel
89SV80/R1200. Mechanical Components. Marshalling rack cubicle with double-sided MTP-Elements. Application. Description. Cubicle
Module Description Procontrol P Mechanical Components Marshalling rack cubicle with double-sided MTP-Elements 1KGD 400 012 E, Edition 01/2010 89SV80/R1200 Application The marshalling rack cubicle has the
InForm Superstructures
Advantages InForm racks are fitted between the vertical profiles and thus ensure a generous amount of open working table surface. Devices are installed directly in the 3HU and 6HU racks, additional devices
STANDS Speaker Television. All-Steel Speaker Stand SS7725B (page 82)
STANDS Speaker Television SS8800B+ Power Crank-Up Speaker Stand 80 (page 82) All-Steel Speaker Stand SS7725B 1 2 4 7 1 Cl assic Speaker Stand SS7730B 1 0 6 4 9 Upper Shaft Tubing: 1.375"or 1.5" Upper Shaft
DC Outdoor Power Supply/Chargers
DC Outdoor Power Supply/Chargers Installation Guide Models Include: WayPoint3 WayPoint7-2.5A @ 12VDC or 24VDC. - 6A @ 12VDC or 24VDC. - 115/230VAC input. - 115VAC input. WayPoint5 WayPoint7V - 4A @ 12VDC
MODEL: R1M-A1. PC Recorders R1M Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.)
PC Recorders R1M Series PC RECORDER (contact input, 32 points) Functions & Features Industrial recorder on PC 32-point dry contact inputs Easy system expansion via Modbus RTU Recorded data exportable to
Pan assemblies and installation accessories
Contents Section 10 Pan assemblies and installation accessories SP&N pan assemblies 124 SP&N door and cover 124 TP&N pan assemblies 125 TP&N door and cover 125 Multiclip busbar and Polybloc 126 Comb busbars
DORMA BTS 80 BTS 75 V
Floor Springs DORMA BTS 80 BTS 75 V DORMA BTS 80 DORMA BTS 75 V Floor Springs Universal application, individual functions and assured quality Whether standard, narrow or wide, whether LH, RH, or single
3630P Encl 34X28 Enclosure Panel. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 3630P Encl 34X28 Enclosure Panel Cooper B-Line/Cable Tray Manufacturer Weight per unit Product Category Features Material
Standard Product. Catalog Number. Width. Depth. mm 18 = = = = = = = = 400
Spec-01195 PROLINE G2 External Components Bases Gland Plate Gland plates are used with a plinth base to provide cable management solutions while maintaining a NEMA 12 rating. PROLINE G2 s unique Duro-Stand
nls Product List 1st February, 2014 Tel: Fax: Coombes Drive, Penrith, NSW, 2750 Australia
15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner
North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
Manhole. E+S Trench shoring systems / Endsupported compact shoring systems. Manhole
Shoring length Height ase unit Height top unit Weight 2,0 m / m /,0 m 2,60 m,0 m,4 m 2260 kg 270 kg The is a shaft shoring element displaying all the features of the compact shoring system ut having side
19" TiRAX cabinet system. from page 3. 19" NETcell cabinet system from page 31. Open 19" racks from page 43
9" TiRAX cabinet system from page 9" NETcell cabinet system from page Open 9" racks from page Wall-mounting/stand-alone distribution systems from page 5 Wall-mounting enclosure systems from page 6 Air
VBAR 270. User Manual. Version 1.2
VBAR 270 User Manual Version 1.2 VBAR 270 User Manual Page 1of 19 Introduction Thank you for purchasing VBAR 270. VBAR 270 is a LED light fixture for professional use. Using the RGB color mixing technology
MIDSIZE VEHICLES OR PICKUP TOPPERS & CAPS M-1000, M-2000, M-3000 ALUMINUM
IAB INSTRUCTION MANUAL MIDSIZE VEHICLES OR PICKUP TOPPERS & CAPS M-1000, M-2000, M-3000 ALUMINUM Required Tools Drill with 5/16 Drill Bit MIDSIZE VEHIGLES M1105 50 [ ] M1100 60 [ ] M1150 72 [ ] M2105 50
Wrought Iron Brochure
Wrought Iron Brochure Page 2 Spikes 9211 24mm 125x63mm 9212 26mm 140x70mm 9213 28mm 170x85mm 126/B/6 20mm 80x45mm 126/B/7 25mm 125x64mm 126/B/8 38mm 140x80mm 9543 13mm 133x59mm 9542 14mm 153x70mm 9541
Junction Boxes & Enclosures JBEP and ECEP Series: Undrilled Fiberglass Reinforced Polyester Enclosures Increased Safety
CSPe Type Small Version CAe Type Non-Hinged Version CAe Type Hinged Versions Compliance Data: ATEX - IECEx: Zone 1 & 1 & ATEX II GD IECEx CE Ex e II T6 to T Ex td A1 T75 C to T95 C Ex ia IIC; Ex ib IIC
Terminals, Lugs, and Fasteners
Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying
Floor Standing Rack Cabinet
Floor Standing Rack Cabinet FEATURES: rear door with bolt lock front door panel with vented holes Reliable structure, static loading capacity: 600-00KG (Optional castors and plinth) Adjustable feet and
Lift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
Required Tools. Ford Transit Connect J4075 with R16 Tracks TRANSIT CONNECT 69 RAIL IBI. Marker. 7/16 / 9/16 / 1/2 Wrench.
IBI Required Tools INSTRUCTION MANUAL Marker 7/16 / 9/16 / 1/2 Wrench Drill with 3/8 Drill Bit Allen Key Ford Transit Connect J075 with R16 Tracks Part # J075 Rails 96 Bars 55 [ ] BLACK WHITE SILVER [
MBKKB 2,5-PV. Extract from the online catalog. Order No.:
Extract from the online catalog MBKKB 2,5-PV Order No.: 2800583 Mini double-level terminal block, with equipotential bonding between the levels, cross section: 0.2-2.5 mm², width: 5.2 mm, color: Gray Commercial
Wheelchair, foldable heavy duty
SPARE PARTS MANUAL WHEELCHAIRS Sideguard 2 5 6 7 4 8 9 0 0 95024 Sideguard, heavy duty, right pc. 02 9502 Sideguard, heavy duty, left pc. 0 42002 Sideskirt black, right pc. 04 4200 Sideskirt black, left
Content. Shield connection terminals. Overview G.2 - G.3. For 10 x 3 mm busbars Clamping yoke G.4 - G.5 Busbarholders G.6 - G.
Content Overview.2 -.3 For 10 x 3 mm busbars Clamping yoke.4 -.5 Busbarholders.6 -.7 Mounting directly on metal plate Clamping yoke.8 Busbar holder, Spacer.9 Mounting on TS 35 FM 4-foot / Clamping yoke
Connection Solutions
Connection Solutions Connection Solutions for Cold formed Steel Construction Complies with; AS/NZS 4600:2005 AISI S100:2007 AS/NZ 1397 ASTM A653 www.framecad.com FRAMECAD Connectors are designed for speed,
EFFICIENT AND STABLE POWER DISTRIBUTION Workside power distribution boards
0 - Workside power distribution boards EFFIIENT AND STABLE POWER DISTRIBUTION. Workside power distribution boards from : These robust, electrical jack-of-all-trades meet every requirement for demanding
[.050 (1.27mm) Density. D-Microminiature]
![[.050 (1.27mm) Density. D-Microminiature]](/thumbs/90/103901339.jpg "[.050 (1.27mm) Density. D-Microminiature]")
Commercial [.050 (1.27mm) Density Solder Introduction Cup/Wire D-Microminiature] Cinch Commercial Products, consisting of Jones Plugs and Sockets, Barrier Blocks, Edge Cards, Two-Piece Commercial Dins,
SYSTIMAX Rack and Cabinet Solution
SYSTIMAX Rack and Cabinet Solution The SYSTIMAX Rack and Cabinet Solution offer is designed for use in telecommunications equipment installations, providing our SYSTIMAX BusinessPartners and customers
KM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)
KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
Motion technologies TIP-ON for doors
TIP-ON for doors Opening comfort for handle-less fronts Handle-less furniture is becoming more and more popular in the home. With TIP-ON, we offer a mechanical opening support system for handle-less furniture
Conductor and Cable Marking Description and Handling
Conductor and Cable Marking Description and Handling 566 Wire marking The following markers are available: Markers for plotter marking. Markers on roll for thermal transfer printing. Remove the printed
Featured Products - RU Marking Standard on Hoffman brand
: Open Frame Racks CHAPTER Open frame racks are versatile solutions for mounting hubs, switches, routers and servers. Easy access to all sides simplifies maintenance and updates. Solidly constructed, Pentair
modular enclosure MUREVA, IP65 weatherproof & versatile enclosures aesthetics multi-functional evolutionary ergonomics and time saving security
aesthetics c Elegant and robust design. c Colour easy to integrate in any environment. weatherproof & versatile enclosures multi-functional c Different solutions for: industrial control, electrical distribution,
Limanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes - 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and
IP Enclosures Product Overview 2015
IP Enclosures Product Overview 2015 ENGINEERING COMPUTER SERVICES LTD Wall Mounted Electrical Enclosure Systems IP Enclosures is a premium brand of high quality wall mounted electrical enclosures and accessories.
60W Power over Ethernet Waterproof Adapter PoE IEEE BT Single Port Injector for Outdoor Application
WWW.PHIHONG.COM 60W Power over Ethernet Waterproof Adapter PoE IEEE BT Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3bt Standard Non-Vented Case with Mounting Bracket
GF Sentry Flame Failure Series
GF Sentry Flame Failure Series Gas Range Match Broilers Parts List Models GF8-BRL GF2-BRL GF30-BRL GF36-BRL Document Number: G_GMD_PL_RMBROILERSGFSERIES_GF-BRL (Rev 6 05/207) Rating Plate Location The
SYSTEM 25 SYSTEM 50 AS SYSTEM 63 SYSTEM 75 SYSTEM 100. Alsident System 50. Antistatic (AS) Product Information
Alsident System 50 Antistatic (AS) Product Information . System 50 Antistatic General Information Product Specification Product description System 50 Antistatic Alsident System Airflow between 45-85 m
IT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
System 16 Precision-Clamping & Welding Bench
UKOP-2.04K16 System 16 Precision-Clamping & Welding Bench System 16 Contents System 16 S4 Welding bench Aluminium Plate with holes Bench legs Stops Squares Prisms Bolts Clamps Fast clamping 2-3 4-5 6-7
XL 4000 metal free-standing enclosures and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL metal free-standing enclosures and CONTENTS PAGE 1. General characteristics...1 2. Range...2 3. Overall dimensions...2 4. Equipment...3
Limanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes: 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and stationary