Solder Crimp Class Class TV* Service Total 22D 22M (Coax) (Power) (Coax) (Twinax) I, Fiber

Transcription

1 mphenol erospace I--, eries I, II, III V Insert vailability and Identification hart igh peed I ilter rinted III ransient ircuit oard rimp Rear ontacts Release atrix atrix yle atrix 2 I II III eries eries eries ilitary / ermetics ontact II I V III V III older rimp lass lass V* ervice otal Y Rating ontacts (oax) (ower) (oax) (winax) X 9-3 X rounded 8-6 X X 9-6 X X X X I X X X 9-44 X X X X X I X ** I X /2 I X X X X I I X X / / -3 X X / / X / / X / / X II X X / / X X / / I X X I X X 3-3 II X X X X 2-8 X X X X I 4 4 I 8 8 I, iber ** 2 Optic 2-22 X / / X X / / 2-35 X / / X / / 3-63 l X X / / I X X / / I X X II X X 4-5 X X I X X / / I 5 4 X ompletely tooled. ajority of tooling is completed (contact mphenol erospace for availability). ot tooled for 02-R. vailable with in contacts only vailable with ocket contacts only / vailable with in contacts or ocket contacts round plane proprietary option available. rrg. 9-5 is exclusively ground plane type. ot il-qualified is il-qualified with twinax contacts only. ote: connector 2-75 is supplied with size 8 twinax. ommercial connector 2-75 is supplied with size 8 coax. * ermetic inserts - solder termination standard. (ontact mphenol erospace for optional or eyelet termination). ** wo size 6 contacts dedicated to fiber optics. ee the iber Optic section for more information. *** or use in I--760 applications (see pages 40 & 4). or R 80/U and R 95/U cables only. 8 oax and winax are interchangeable. (2) ot ooled for R or 02R (3) in inserts only, not tooled for R or 02R (onsult idney, Y for avail.) (5) onnector 2-79 has provision for two size 8 coax contacts. oax contacts are not supplied unless specified by customer. 4 ontact mphenol erospace for more information at

2 I--, eries I, II, III V Insert vailability and Identification hart mphenol erospace eries eries eries ilitary / ermetics ontact older rimp lass lass V* ervice otal II I V III V III Y Rating ontacts (oax) (ower) (oax) (winax) 4-8 X X / / X X / / I X X X I X X / / X X 5-37 X X X X X X I X X X I X X X X / / II I oax X X / / X X / / I X X X X X X X / / 7-55 X X / / X I/oax X X X X I X Inst X X 9-9- X X II X X X X X I X X 9-30 X I X X X / / X X / / I X X X X X X 9-66 X X I I X 2- X / / X 2-2 X X I III II I III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts ontact mphenol erospace for more information at

3 mphenol erospace I--, eries I, II, III V Insert vailability and Identification hart igh peed I ilter rinted III ransient ircuit oard rimp Rear ontacts Release atrix atrix yle atrix 2 I II III eries eries eries ilitary / ermetics ontact older rimp Y V* ervice otal II I V III V III Rating ontacts (oax) 20-6 X X / / X X II X I X I X I X X / / X X X X I X X X X / / I X 4 4 (4) X II (5) 22- X / / 23- X X X 23-2 X X I X X X X II X X X I X I X / / X X X / / I X X X X I X II X II 24- X X 24-2 X X 24-4 X I X X winax winax *** X I X *** X 0 (ower) I X I X X X X ompletely tooled. ajority of tooling is completed (contact mphenol erospace for availability). ot tooled for 02-R. vailable with in contacts only vailable with ocket contacts only / vailable with in contacts or ocket contacts round plane proprietary option available. rrg. 9-5 is exclusively ground plane type. ot il-qualified is il-qualified with twinax contacts only. * ermetic inserts - solder termination standard. (ontact mphenol erospace for optional or eyelet termination). I (oax) 8 (winax) ** wo size 6 contacts dedicated to fiber optics. ee the iber Optic ection for more information. *** or use in I--760 applications (see pages 40 & 4). or R 80/U and R 95/U cables only. 8 oax and winax are interchangeable. (2) ot ooled for R or 02R (3) in inserts only, not tooled for R or 02R (onsult idney, Y for avail.) (4) connector 2-75 is supplied with size 8 twinax. ommercial connector 2-75 is supplied with size 8 coax. (5) onnector 2-79 has provision for two size 8 coax contacts. oax contacts are not supplied unless specified by customer. 6 ontact mphenol erospace for more information at

4 I--, eries I, II, III V Insert vailability and Identification hart mphenol erospace eries eries eries ilitary / ermetics ontact older rimp Y V* ervice otal II I V III V III Rating ontacts (oax) (ower) X ew X X X I X 2 I I X X V eries III elect - pecial Insert rrangement (ot il-pec Qualified) - Insert rrg. ontact rimp ermetics* ervice Rating otal ontacts 9-2 X I 2 ormerly yle X II 4 ormerly yle X 25 ormerly yle X 20 ormerly yle X I 2 ormerly yle X /Inst. 4 Improved sealing X 6 ormerly yle X 0 ormerly yle X 42 ormerly yle omments (winax) 8 (oax) 8 (winax) I X X X I I X /I X ompletely tooled. ot tooled for 02-R. in inserts only (contact mphenol erospace for socket availability). round plane proprietary option available. rrg. 9-5 is exclusively ground plane type. ot il-qualified. 8 Quadrax III II I III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient elect on-tandard - pecial Insert rrangement - Insert rrg. (ot il-pec Qualified) rimp ermetics* ervice Rating otal ontacts ontact X X II X II X II X II X II X II 4 4 (Insert arrangements requiring non-standard shells or larger contacts) X ompletely tooled. ajority of tooling is completed (contact mphenol erospace for availability). ot tooled for 02-R. in inserts only (contact mphenol erospace for socket availability). round plane proprietary option available. rrangement 9-5 is exclusively ground plane type. ot il-qualified. * ermetic inserts - solder termination standard. (ontact mphenol erospace for optional or eyelet termination). ** wo size 6 contacts dedicated to fiber optics. ee the iber Optic section for more information. *** or use in I--760 applications (pgs. 40 & 4). or R 80/U and R 95/U cables only. 8 oax and winax are interchangeable. ote: 25-3 and 25-7 require longer shells. igh peed ontacts ontact mphenol erospace for more information at

5 mphenol erospace I--, eries I, II, III V Insert rrangements igh peed I ilter rinted III ransient ircuit oard rimp Rear ontacts Release atrix atrix yle atrix 2 I II III & Insert rrg. for: U R U V R ront face of pin inserts illustrated eries II eries I eries III V ervice Rating rounded I I umber of ontacts ontact winax & Insert rrg. for: eries II eries I eries III V ervice Rating I I I I II I I II umber of ontacts ontact & Insert rrg. for: R a U b Z c V Y W X 6 R eries II eries I eries III V ervice Rating I I I I I II I umber of ontacts ontact & Insert rrg. for: eries II eries I eries III V ervice Rating I I I I umber of ontacts ontact winax & Insert rrg. for: eries II eries I eries III V ervice Rating I II I oax I umber of ontacts ontact oax 8 oax 22 8 oax O ontact mphenol erospace for more information at

6 I--, eries I, II, III V Insert rrangements mphenol erospace ront face of pin inserts illustrated & Insert rrg. for: R Y Z X W eries II eries I eries III V ervice Rating I/oax I II umber of ontacts ontact winax oax R R d c b a U V e Z W X Y Z 9 & R Insert rrg. for: eries II eries I eries III V ervice Rating I I umber of ontacts ontact 22 8 winax oax U & R Insert rrg. for: eries II eries I eries III V ervice Rating I I umber of ontacts ontact R d c U e b V g f a W Z X Y & 9 8 Insert rrg. for: eries II eries I eries III V ervice Rating Inst. I II umber of ontacts ontact 20 8 winax U V f W U U R e V h g d j f W c b g h X a Y U V 2 3 R III II I III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts O ontact mphenol erospace for more information at

7 mphenol erospace I--, eries I, II, III V Insert rrangements igh peed I ilter rinted III ransient ircuit oard rimp Rear ontacts Release atrix atrix yle atrix 2 I II III U V W j X Y i k Z h r m a R g q n b f c d e p V W U j X Y i k s Z m h t r a n R g q p b c f e d O R U ront face of pin inserts illustrated & 0 9 Insert rrg. for: eries II eries I eries III V ervice Rating I I I umber of ontacts ontact & Insert rrg. for: W R V X b Y a Z U Z Y R X d a b eries II eries I eries III V ervice Rating I I II umber of ontacts (ee ote) 00 ontact (ee ote) & Insert rrg. for: W c V U V W U X V R Z Y 7 3 b eries II eries I eries III V ervice Rating I II I umber of ontacts ontact 22 8 winax ote: connector 2-75 is supplied with four size 8 twinax contacts. ommercial connector 2-75 is supplied with four size 8 coax contacts. connector 2-79 has provision for two size 8 coax contacts. oax contacts are not supplied unless specified by customers a X g h f j W R c e d U V ontact mphenol erospace for more information at

8 I--, eries I, II, III V Insert rrangements mphenol erospace ront face of pin inserts illustrated & Insert rrg. for: eries II eries I eries III V ervice Rating I I umber of ontacts ontact U V W X m n p Y q k R z r Z j y a s i x t b h w u v c g f d e & Insert rrg. for: eries II eries I eries III V ervice Rating I II II umber of ontacts ontact & Insert rrg. for: R c b a d 2 k j 3 U V e f W l g X h Y Z Z a Y w v b c X u x d W t y e V s z f r U g q h p k n m R *** or use in I--760 applications (see pages 40 and 4) R R n U m p V k W q z r h X y s g Y x t f w u a Z e v d b c eries II eries I eries III V ervice Rating I winax umber of ontacts ontact winax 8 winax III II I III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts O ontact mphenol erospace for more information at

9 mphenol erospace I--, eries I, II, III V Insert rrangements igh peed I ilter rinted III ransient ircuit oard rimp Rear ontacts Release atrix atrix yle atrix 2 I II III Y X W R Z V a U R 0 9 Z a Y U b c V d q r s e w t p f n v u g k m h X 2 6 W U a R b Z V Y f R c e X d U ront face of pin inserts illustrated & Insert rrg. for: eries II 24-9 eries I eries III V 25-*** *** ervice Rating I umber of ontacts ontact winax winax 2 oax 8 24 & Insert rrg. for: eries II eries I eries III V ervice Rating I I I umber of ontacts ontact oax 6 22 R & Insert rrg. for: e d c U f q b g p h r n V k a W m Z X Y X Y Z W p n a V m b U w q k c v x r h d u t s g e R f W V X R Y 7 p 4 Z V W 36 W U s r q R z n m y k h t U V (With atched Impedance) b X u Y v Z a w c d x e g f eries II eries I eries III V ervice Rating I I I umber of ontacts ontact oax oax contacts for R80/U or R95/U cable. O ontact mphenol erospace for more information at

10 I--, eries I, II, III V Insert rrangements mphenol erospace ront face of pin inserts illustrated & h g f 5 4 Insert rrg. for: eries II 24-6 eries I 25-6 eries III V ervice Rating I I I 22=, alance =I umber of ontacts ontact winax I--, eries III V pecial Insert rrangements & Insert rrg. for: R W V t s U r q z p R n m y k O: ome specials shown here were formerly known as yle arrangements. onsult mphenol for how to order information for connectors with these inserts. or further information on special arrangements consult mphenol erospace, idney Y. * yle 5-4 does not mate with mphenol ri-tart 5-4 insert. 3 X u Y v Z a b w c x d e eries III V * ervice Rating I II I /Inst. umber of ontacts ontact & Insert rrg. for: Z Y a v b X u c t W w d s x V e U r y f z q g p h n i R m k j d e R f c g h t u w j b v s p n k r m a Z X V U Y W eries III V ervice Rating umber of ontacts ontact III II I III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts O ontact mphenol erospace for more information at

11 ccessories igh peed I ilter rinted III ontacts ontacts rimp Rear ools ransient ircuit oard Release atrix atrix yle atrix 2 I II III mphenol erospace I--, eries III V pecial Insert rrangements on-tandard s or arge ontacts ront face of pin inserts illustrated & Insert rrg. for: eries III V ervice Rating II II umber of ontacts ontact & Insert rrg. for: eries III V ervice Rating II II II umber of ontacts ontact & Insert rrg. for: eries III V 37-5 ervice Rating II umber of ontacts 4 ontact 0 O: ome specials shown here were formerly known as yle arrangements. onsult mphenol for how to order information for connectors with these inserts. onsult mphenol erospace for longer shell drawings. O ontact mphenol erospace for more information at

12 I--, eries I, II, III V pecifications/ ontacts mphenol erospace ontact *When tested using silver plated wire. ervice Rating est urrent (mps) rimp ermetic aximum illivolt rop rimp* uggested Oper. Voltage (ea evel) O RI aximum illivolt rop older* ermetic* (ower) (ower) RVI RI** est Voltage (ea evel) ontact est Voltage 50,000 t. rimp Well ata Well iameter ormal Well epth est Voltage 70,000 t older Well ata Well iameter est Voltage 0,000 t. (R) VR 550 VR 350 VR 200 VR VR 400 VR 260 VR 200 VR I VR 600 VR 400 VR 200 VR II VR 800 VR 500 VR 200 VR ** lease note that the establishment of electrical safety factors is left entirely in the designer s hands, since he is in the best position to know what peak voltage, switching surges, transients, etc. can be expected in a particular circuit. ontact ominal Well epth ± ± ± ± ± ± (ower).37 ± ± ± ± I-- eries III R 500 Y O OR V V, & ontact V/V ins V/V ockets ** or use with 7/ ilitary o. upersedes ilitary o. upersedes cable. 8 (oax)* 39029/ / Optional design - see slash sheet 8 (ower) ontact actory (winax) 39029/90-529** / 39029/9-530 / or other contact options available 0 (ower) 39029/ / 39029/ / for use in ri-tart connectors, (wire wrap, thermocouple, fiber optic) / / consult mphenol. Wire wrap data / / given on next page / / / / / / / / 0 / / / / bove part numbers include standard 500 cycle finish designation - gold plating over suitable underplate in accordance with or other finish variations, consult idney, Y. *or use with R80/U and R95/U cable. or other size 8 coax or optional sizes 2 and 6 coax contacts available for use in ri-tart connectors, see igh peed ontact section of this catalog or consult mphenol, idney, Y. I-- eries III 500 Y O OR V, & ontact V ins V ockets ommercial o. ilitary o. upersedes ommercial o. ilitary o. upersedes X 39029/ X 39029/ X 39029/ X 39029/ X 39029/ X 39029/ X 39029/ X 39029/06-64 I-- eries II / eries I RI O / ins ocket ockets ontact / ins ocket o. o. o. o. o. 8 (oax)* 39029/ / (winax) 39029/90-529** 39029/ (ower) 39029/ / / / / / / / ockets o / / / / / / / / / / / / III II I III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts ontact mphenol erospace for more information at

13 mphenol erospace I--, eries I, II, III V pecifications igh peed I ilter rinted III ransient ircuit oard rimp Rear ontacts Release atrix atrix yle atrix 2 I II III inish II I--, eries I, II luminum omponents on-ermetic inish uffix Indicated inish ilitary ommercial tandard for inish ypes isted elow lus R uffix Indicated inish tandard for ypes isted elow admium lated ickel ase () (R) /// / nodic oating (lumilite) () (005) (300) // / hromate reated (Iridite 4-2) (0) (344) // / Olive rab admium late ickel ase () (04) (386) lectroless ickel () (023) (424) ickel- (038) arbon teel in lated and ontacts arbon teel in lated and old lated ontacts II I--, ri-tart eries III V luminum omponents on-ermetic ermetic onnectors inish uffix Indicated inish tandard for ilitary ommercial ypes isted elow () ilitary ervice lass ( ) / ( )Y ( ) / ( )Y tainless teel old lated ontacts () (62) ( )Y ( )Y ommercial nodic oating (on-onductive) RX** lectroless ickel Olive rab admium late ickel ase (etal) (omposite) W (etal) (omposite) tainless teel with ickel late R tainless teel R urmalon plated Zinc-ickel lated Z Z aterial/inish ermetic omponents ilitary ervice lass R RW ommercial tainless teel Y Y tainless teel with ickel late Y **dd uffix (005) to part number. Indicated inish tandard for ypes isted elow ( )Y ( ) ( )Y 6 ontact mphenol erospace for more information at

14 mphenol I--, eries III, V ew eatured ew eatured O O ombined I-- eries I, II, III & Insert rrangements vailability Insert rrangement rawings pecifications - ontact Ratings, ervice Ratings, inish ata , 6 I--, eries III V able of ontents erformance, , 9 Weight omparison (omposite vs. etal) est ata ow to Order (ommercial & ilitary) ow to Order (oeing 63) tyles: rimp Wall ounting Receptacle V00R (9/20) /V00R (/20). 26 rimp ox ounting Receptacle V02R / V02R rimp traight lug V06R (/26) / V06R (/26) rimp U-O traight lug for igh Vibration V26/V rimp am ut Receptacle V07R (/24) / V07R (/24) rimp ine Receptacle V0R / V0R rimp lange ounting lug V09R ermetic ox ounting Receptacle V02Y (/2) ermetic am ut Receptacle V07Y (/23) ermetic older ounting Receptacle VIY (/25), ermetic Weld ounting Receptacle VIY (/27) reakaway ail-afe anyard Release lug /29 & /30 ( / ) , 37 reakaway ail-afe ow to Order (ilitary/ommercial) , 39 reakaway I--760 anyard Release lug / reakaway I--760 ow to Order (ilitary) reakaway ybrid, ow rofile anyard Release lug tores anagement ype II, Rail aunch (I--760) (igh ensity, rimp) lugs and Receptacles / ow to Order.. 43, 44 ccessories, ontacts, and ools see pages I-- eries III ypical arkets: ilitary & ommercial viation ilitary Vehicles issiles & Ordnance 4IR pace pplications mphenol erospace ontact mphenol erospace for more information at

15 mphenol erospace I--, eries III V erformance I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix ri-tart I-- eries III with etal s - luminum, tainless teel, lass irewall mphenol ri-tart I--* eries III onnectors offer the highest performance capabilities for both general duty and severe environment applications. eeting or exceeding I-- eries III requirements, the ri-tart connector with standard metal shells (aluminum or stainless steel with several finish options) offers these features: I hielding - solid metal to metal coupling, grounding fingers, electroless nickel plating, and thicker wall sec tions provide superior I shielding capability of 65d minimum at 0 z ontact rotection - recessed pins in this 00% scoop-proof connector minimize potential contact damage oisture Resistance - improved interfacial seal design helps prevent electrolytic erosion of contacts orrosion Resistance - shells of stainless steel or cad mium over nickel plating withstand a 500 hour salt spray exposure Vibration/hock - operates under severe high tempera ture vibration, through 200 irewall apability - available in a stainless steel shell, class R, R ockwiring liminated - unique, self-locking, quick cou pling connector eliminates lockwiring Quick oupling - completely mates and self-locks in a 360 turn of the coupling nut Inventory upport ommonality - uses standard I-- contacts, application tools, insert arrangements lectrostatic ischarge rotection () - protection for sensitive circuitry without diodes, varistors, etc., with the use of the araday age principle which shunts high voltage, high current discharge events (see page 422) ermetic- air leakage limited to X 0-7 cm 3 per second optional Qualified pecifications - tainless teel qualified to 63 and 63 specifications Optional eometries mphenol offers a number of different shell configurations to fit your needs. eep Reach s - or increased panel thickness tand-off lange s - or attachments to rinted ircuit boards. onnector with Integral train Reliefs * I-- eries III supersedes I-- eries III. pplicable atents: ri-tart onnector atent 4,09,990. omposite onnector atents: 4,268,03; 4,648,670; 4,682,832; 4,703,987. lutch-ok atent 6,52,753. eries III omposite ri-tart, Qualified to I--, Rev. I-Qualified to I--, Rev., the mphenol omposite ri-tart onnector offers a lightweight, corrosion resistant connector with the same high performance features as its metal counterpart. he omposite ri-tart onnector also includes the following features: ightweight - 7% 70% weight savings (7 40% weight savings vs. luminum) (60 70% weight savings vs. tainless steel) ee omposite weight comparison chart on page 20. orrosion Resistance - available in standard I-- olive drab cadmium (-65 to 75 ) and electroless nickel plating (-65 to 200 ), both with standing 2000 hours of salt spray exposure. he base material is able to withstand an indefinite exposure to salt spray. urability couplings minimum (in reference to connector couplings, not contacts) xtended ife ontact - il-approved plating process which provides 500 couplings minimum Qualified to 63 and 63U specifications U-O I-- eries III igh Vibration onnector he ri-tart option U-O offers all advantages of stainless steel/lass firewall for I-- eries III connectors, plus a unique clutch design that actually tightens itself under vibration. eatures include: igh degree of differential torque o settling back to the next ratchet tooth ompletely intermateable with all existing I-- eries III connectors Offers advantage in inaccessible, hard to reach areas where mating torque is difficult to apply and complete coupling is not verifiable by inspection ee page 29 for description, for ordering. 8 ontact mphenol erospace for more information at

16 I--, eries III V mphenol erospace eries III, V ri-tart onnectors, offer more versatility & options than any other interconnection family! igh reliability and increased versatility best describe mphenol I--, eries III circular connectors. Originally designed for the harshest of environments and most demanding of applications, mphenol I- - eries III, ri-tart connectors continue to evolve in pace with the needs of an ever-changing market. mphenol ri-tart connectors can be configured with a number of application specific technologies like ilters, ermetics, ails,, lex, U-O, ail afe, and contacts. lexibility aids in design optimization through the combination of different technologies within a common, time-tested, harsh environment connector body. or more information about options please call or visit III II I III 505 atrix 2 atrix yle rimp Rear Release atrix erformance esigned for erformance umerous advantages in performance capability are designed into the mphenol ri-tart onnector. positive metal to metal coupling design, grounding fingers, and elec troless nickel plating provide superior I shielding capabil ity of 65 d minimum at 0 z. cme threads provide coupling durability. hicker wall sec tions and a greater coupling surface area improve strength and shock resistance. lunting of the thread on both the coupling nut and receptacle eliminates cross coupling. he connector quickly mates and self locks in a 360 turn of the coupling nut. longated mounting holes permit the ri-tart onnector to intermount with various existing I-pec box or wall mount receptacles, giving it a design replacement advantage. s of stainless steel, or cadmium over nickel plating pre vent severe corrosion. Resistance is tested through expo sure to a 500 hour salt spray. omposite versions provide protection from salt spray exposure for 2000 hours. Other finish options are available; see how to order ri-tart metal and ri-tart omposite. Recessed pins minimize potential contact damage in this 00% scoop-proof connector. In a blind mating application, mating shells cannot scoop the pins and cause a shorting or bending of contacts. he design of the mphenol ri-tart interfacial seal meets the I-- eries III requirements for electrolytic erosion resistance. rigid dielectric insert with excellent electrical characteristics provides durable protection to the contacts. he socket contacts are probe proof, and all contacts are rear removable. hey are plated in the standard 50 micro inches minimum gold, with 00 micro inches as an option, and are available in standard ri-tart insert arrangements and special yle insert arrangements in sizes 0 power, 2, 6, 20 and 22 con tacts. pecial insert patterns are also available with larger contacts in sizes 4 and 0. rinted ircuit oard I ilter ransient igh peed ontacts ontact mphenol erospace for more information at

17 mphenol erospace I--, eries III V Weight omparisons (omposite vs. etal) I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix epending on the shell style, shell size and contact count, weight savings can range from 7% to 40% compared to standard aluminum product ri-tart Weight in Ounces (includes contacts) Weight Wall ount Receptacle (00 ilitary /20 am ut Receptacle (07) ilitary /24 lug (06) ilitary /26 tainless teel ll weight measurements are for reference only. luminum omposite tainless luminum omposite tainless teel luminum omposite in ocket in ocket in ocket in ocket in ocket in ocket in ocket in ocket in ocket ontact mphenol erospace for more information at

18 I--, eries III V est ata mphenol erospace d RI-R, RI III YI II IV I/ II IV d I Y RIXI O I, YI I IV I, I-- RQUIR RQUY RZ mphenol ri-tart connectors provide I/ shielding capability which exceeds I-- eries III requirements. he V and V eries III connector with standard solid metal to metal coupling, I grounding fin gers and conductive finishes has proven to be the ultimate in I/ shielding effectiveness. he charts illustrate shielding effectiveness data which is typical of ri-tart connectors tested with the nickel finish (lass -metal, lass -composite) over a wide frequency range. he vibration capability of the ri-tart eries is shown in the chart below. his illustrates the most severe vibration envelope of any qualified connec tor available today. hese capabilities along with a +200, -65 temperature rating and superior moisture sealing protection pro vide the user with a connector that can withstand the most rigorous application. III II I III 505 atrix 2 atrix yle rimp Rear Release atrix d RI-R, RI III YI II IV I/ II IV d I Y O IRRI O I, YI I IV I, I-- RQUIR RQUY IRZ OWR R IY 2 /Z d/octave 0in/sec * ependant on shell finish RI-R VIRIO RIRI.06 in RZ OU IU (I) I VIRIO 2 ambient * (ail afe: 2 ambient) 3 55 ambient * 60 's (ail afe: 3 ambient 30 's) OWR R IY ( 2 /Z) RO VIRIO rinted ircuit oard I ilter ransient igh peed ontacts est data beyond 2z is subject to equipment variation. O: or test data information on the new lutch-ok ri-tart, high vibration connectors, consult mphenol erospace. ontact mphenol erospace for more information at

19 I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix mphenol erospace ommercial tyle ervice lass Insert rrangement tep. elect a onnector ype I--, eries III V ow to Order (ilitary and ommercial) asy teps to build a part number... ri-tart eries III V V V V ontact ype lternate eying osition pecial Variations V 00 R 9-35 (XXX) ilitary tyle ervice lass Insert rrangement ontact ype lternate eying osition / esignates ri-tart eries onnector ack panel mounted receptacle 200 rated V anel mounted, 200 rated receptacle V V V V V Wall ount Receptacle U-O connector with stamping (ote: remove dashes in how to order part number when ordering U-O) omposite I- - eries III onnector anel mounted composite receptacle 200 rated, composite omposite anel mounted, 200 rated receptacle ilitary I-- eries III onnector ine Receptacle V, V, V, V ox ount Receptacle tep 2. elect a tyle ommercial ilitary esignates V, V V U- V, V O ilitary ilitary omposite U- O Wall ount Receptacle 02 ox ount Receptacle 2 ox ount Receptacle ermetic ine Receptacle traight lug am ut Receptacle lange ounted lug 23 am ut Receptacle ermetic I 25 older ount Receptacle ermetic I 27 Weld ounted Receptacle, (ermetic) Only U-O high vibration straight plug (service lasses R & R only 29 anyard release plug with pin contacts 30 anyard release plug with socket contacts 3 anyard release plug for I--760 with pin contacts 32 lug protection cap 33 Receptacle protection cap traight lug am ut Receptacle lange ounting lug eep Reach Receptacle older ount ermetic Receptacle anyard Release lug 22 ontact mphenol erospace for more information at

20 I--, eries III V ow to Order (ilitary and ommercial) tep 3. elect a ervice lass V, V RW- etal RW- etal V, V RW- omposite RW- omposite V, V R- omposite R- omposite onnector ype tep 4. elect a & Insert rrangement see pg. 4-7 & Insert rrangement are on pages 4-7. irst number represents, second number is the Insert rrangement. X esignates in ontacts ocket ontacts tyle V V U- O 500 ycle in ontacts 500 ycle ocket ontacts ervice lass RX - Insert rrg. onnector ype tep 5. elect a ontact ype ontact ype lternate osition mphenol erospace Quadrax or ifferential winax: he incorporation of Quadrax or ifferential winax contacts requires a modified connector to accommodate keyed contacts. * /2620, is a series III stainless steel plug with twin axial and coaxial contacts that may not meet the firewall requirement of the specification. /266, is a series III stainless steel plug with high durability contacts. owever, the connector will be limited to 500 cycles of durability. Insert arrangements using multi-axial (i.e. coax, twinax, triax shielded) contacts should not be used in firewall applications. pecial Variations ilitary inish escription RX nodic oating lternate finish, on-conductive, anodic coated aluminum, 500 hour salt spray, 200. onsult mphenol, idney Y for details, options and availability of non-cadmium or nickel finishes. R- etal R- etal -etal -omposite lectroless ickel R- etal lectroless ickel lectroless ickel Olive rab admium R** R** R** assivated tainless teel R R tainless teel w/ ickel late W-etal -omposite Olive rab admium electroless nickel plated aluminum (composite) optimum I shielding effectiveness 0z specification min., 48 hour salt spray, 200 (omposite-2000 hours dynamic salt spray). electroless nickel plated ground plane aluminum (composite), 200 pace grade, electroless nickel, 48 hour salt spray, 200 Olive drab cadmium plated ground plane aluminum (composite), 75 orrosion resistant stainless steel, firewall capability, plus 500 hour salt spray resistance, I 45 0 z specification min., 200 orrosion resistant steel, electro deposited nickel, 500 hour salt spray, 200, non firewall orrosion resistant olive drab cadmium plate aluminum (composite), 500 hour salt spray, I 50 0 z specification min., 75 (omposite-2000 hours dynamic salt spray). Y Y Y tainless teel ermetic seal, passivated stainless steel, 200 R* R* R* tainless teel w/ ickel late (on-hermetic connectors), ickel plated, corrosion resistant steel, firewall capability, 500 hour salt spray, 200 Y Y tainless teel w/ ickel late (ermetic connectors), ickel plated corrosion resistant steel, 200 urmalon plated ickel- alternative to admium. orrosion resistant, 500 hour salt spray, I-50d at 0z specification min., 75 Z Z Zinc-ickel lated Zinc-ickel lternative to admium corrosion resistant, 500 hour salt spray, onductive, -65 to +75 * onsult mphenol erospace, idney, Y for availability. **oaxial arrangements are not available in these classes tyle ervice lass - ontact ype Insert rrg ame as except supplied less pin ontacts (or ilitary prefix only) lternate osition ame as except supplied less socket contacts ( & designate nonstandard contact applications) (or ilitary prefix only) yelet contacts, hermetics only pecial Variations III II I III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts ontact mphenol erospace for more information at

21 mphenol erospace I--, eries III V ow to Order (ilitary and ommercial) I II III tep 6. elect an lternate eying osition ey/eyway osition onnector ype tyle ervice lass - Insert rrg. ontact ype lternate pecial Variations osition igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix R R R R ey & eyway or or or or rrangement Identification etter * * , , and * and * , , and * , , and * n designation is used on military part number but not on the commercial versions tep 7. pecial Variations onsult mphenol erospace, idney Y for variations. plug with a given rotation letter will mate with a receptacle with the same rotation letter. he angles for a given connector are the same whether it contains pins or sockets. aster key stay fixed, minor keys rotate. Inserts are not rotated in conjunction with the master key/keyway. R R R R I YWY U (front face shown) onnector ype R (front face shown) I YWY tyle ervice lass - Insert rrg. ontact ype lternate osition pecial Variations (xxx) 24 ontact mphenol erospace for more information at

22 oeing 63 ow to Order mphenol erospace asy teps to build a part number... oeing 63 & U oeing asic umber tyle inish & ontact Insert rrangement ontact ype lternate eying osition omposite tep. oeing umber 63 tep 2. elect a tyle U esignates omposite lug omposite Receptacle tep 3. 5 tep 4. elect a inish & ontact esignates tyle Only. admium lated, rounded admium lated, ungrounded ickel lated, rounded ickel lated, Ungrounded Ordering Option tep 6. elect a ontact ype esignates in ocket tep 7. elect an lternate eying osition asy teps to build a part number... oeing 63 & oeing asic umber tyle eparator Insert rrangement ontact ype lternate eying osition Ordering Option tep. oeing umber 63 tep 2. elect a tyle esignates 5 One tainless teel esignates tainless teel lug tainless teel Receptacle tep 3. elect a esignates 9-25 tep 5. Insert rrangements- onsult mphenol erospace for insert rrangements available. tep 4. eparator tep 5. Insert rrangements- onsult mphenol erospace for insert rrangements available. tep 6. elect a ontact ype esignates eparator esignates in ocket - tep 8. Ordering Option lank tep 7. elect an lternate eying osition - tep 8. Ordering Option lank esignates ormal lternates esignates Without ontacts & eal lugs With contacts and seal plugs esignates ormal lternates esignates Without ontacts & eal lugs With contacts and seal plugs III II I III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts ontact mphenol erospace for more information at

23 I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix mphenol erospace R # o complete, see how to order pages R 2 R Red band indicates fully mated R 4 (V) (V) (V) (V) R U lue band indicates rear release contact retention system V00R (/20) - rimp, etal V00R (/20) - rimp, omposite Wall ounting Receptacle Z (V) Z (V).240 X 3.50 X (V) (V) V R VIW OR IZ 8 OXI OY, RIV O.86 X 2.87 X (V).909 X X (V) VIW OR IZ 8 WIX OY, RIV O.037 X X (V).084 X X (V) O IIO OUI 2 RO OUI hread 2 ax. lass Z. Z R 0.=0.3- ax. ax R ack ront anel ax. ax. anel anel hickness (V) (V) ± ±.005 ode (lated) (V) (V) (V) (V) ax. ±.008 (V) (V) ount ount ax. ode (V) onnector ype ax. (V) tyle (V) ervice lass (V) & Insert rrg ontact ype R R 2 ax. lternate osition ±.20 pecial Variations V 00 RW 9-35 (453) V 00 R X-X X X (XXX) V 00 R X-X X X (XXX) V 00 R X-X X X (XXX) V 00 RW X-X X X (XXX) V 00 R X-X X X (XXX) / 20 X X-X X X V hread etric Z. ax. (V) Z ax. (V) ack anel ount 2 ront anel ount ax (V) Inches illimeters X-6g X-6g X-6g X-6g X-6g X-6g X-6g X-6g X-6g ±.3 (V) ±.20 ll dimensions for reference only esignates true position dimensioning 26 ontact mphenol erospace for more information at

24 V02R rimp, etal V02R rimp, omposite ox ounting Receptacle Red band indicates fully mated lue band indicates rear release contact retention system onsult mphenol erospace for availability of composite box mount receptacles. 4 ode 2 R 2 R hread lass 2 0.=0.3- (lated) ax. (V) 4 ax. (V) (V) R (V) U R Z (V) Z (V) (V) (V) (V) (V) R R 2 ax. (V) (V) ±.008 Z. ax. (V) Z ax. (V) ack anel ount mphenol erospace 2 ront anel ount O IIO OUI 2 RO OUI ax. anel hickness ax. ode (V) ax. (V) (V) (V) R R 2 ax. R # o complete, see how to order pages ±.20 Z. ax. (V) onnector ype Z ax. (V) ack anel ount 2 ront anel ount ax (V) (V) ±.005 (V) Inches ±.008 illimeters tyle ervice lass & Insert rrg ontact ype lternate osition ±.3 (V) pecial Variations V 02 RW 9-35 (453) V 02 R X-X X X (XXX) V 02 R X-X X X (XXX) V 02 R X-X X X (XXX) V 02 RW X-X X X (XXX) V 02 R X-X X X (XXX) ±.20 III II I III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts ll dimensions for reference only esignates true position dimensioning ontact mphenol erospace for more information at

25 I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix mphenol erospace R # o complete, see how to order pages V R.359 X 9.2 X V R.359 X 9.2 X.234 X 3.34 X.220 X 3.00 X R.234 X 3.34 X lue band indicates rear release contact retention system OOI ode onnector ype tyle V06R (/26) rimp, etal V06R (/26) rimp, omposite traight lug ervice lass hread (lated) & Insert rrg U R U Inches Q ia. ax ontact ype lternate osition pecial Variations V 06 RW 9-35 (453) V 06 R X-X X X (XXX) V 06 R X-X X X (XXX) V 06 R X-X X X (XXX) V 06 RW X-X X X (XXX) V 06 R X-X X X (XXX) / 26 X X-X X X Q Q VIW OR IZ 8 OXI OY, RIV O.656 X X VIW OR IZ 8 WIX OY, RIV O.797 X X illimeters ode Q ax. V hread etric X-6g X-6g X-6g X-6g X-6g X-6g X-6g X-6g X-6g ll dimensions for reference only. 28 ontact mphenol erospace for more information at

26 V26/V26 rimp, etal U-O lug or igh Vibration pplications R # o complete, see how to order pages onnector ype tyle ervice ontact lternate pecial lass & Insert rrg ype osition Variations lternate ositions- shows normal polarization V 26 R 9-35 (453) V 26 R X-X X (XXX) V 26 R X-X X (XXX) V 26 R X-X X (XXX) or parts with tamping use V26( ) part number as shown above. mphenol erospace esigned for high vibration and harsh environments such as aircraft gas turbine engines, the U-O is also an ideal choice for demanding applications such as aircraft, space and military ground vehicles. he unique clutch design of the mphenol U-O means that you don t have to compromise the need for quick, smooth mating of plugs and receptacles in order to get increased uncoupling torque. he U-O has proven to not only remain mated and pass all the eries III specification requirements, it also has proven to actually tighten itself under vibration. his is a powerful advantage over the traditionally high vibration application connectors. he U-O is also a tremendous advantage in inaccessible, hard to reach areas where mating torque is difficult to apply and complete coupling is not verifiable by inspection. U-O features and benefits: igh degree of differential torque Infinite free coupling and positive metal-to-metal bottoming with each mating o settling back to the next ratchet tooth vailable with stainless steel shells and lass firewall inserts ll the advantages of I-- eries III including I/RI shielding, electrolytic erosion resistance and contact protection with recessed pins nhanced connector performance at affordable prices ompletely intermateable with all existing I-- eries III connectors ully Q d III II I III 505 atrix 2 atrix yle rimp Rear Release atrix V R.234 X 3.34 X lue band indicates rear release contact retention system Inches ll dimensions for reference only..220 X 3.00 X R.359 X 9.2 X ode hread (lated) U Q ia. ax Q ode VIW OR IZ 8 OXI OY, RIV O.656 X X Q ax. illimeters V hread etric X-6g X-6g X-6g X-6g X-6g X-6g X-6g X-6g X-6g rinted ircuit oard I ilter ransient igh peed ontacts ontact mphenol erospace for more information at

27 I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix mphenol erospace R # o complete, see how to order pages onnector ype 2 tyle I.062 I.25 X.57 I 3.8 X R R.09 X 2.3 X R IZ 9/ IZ 3/ X 32.5 X Red band indicates fully mated U.378 X 9.60 X V R lue band indicates rear release contact retention system VIW OR IZ 8 OXI OY, RIV O.794 X 20.7 X VIW OR IZ 8 WIX OY, RIV O.940 X X.059 dia min..5 dia min., 3 lockwire holes ormed lockwire hole design (6 holes) is optional V07R (/24) rimp, etal V07R (/24) rimp, omposite am ut Receptacle ode hread lass (lated) ax ex Inches ± illimeters ervice lass & Insert rrg ode ax. ontact ype lternate osition pecial Variations V 07 RW 9-35 (453) V 07 R X-X X X (XXX) V 07 R X-X X X (XXX) V 07 R X-X X X (XXX) V 07 RW X-X X X (XXX) V 07 R X-X X X (XXX) / 24 X X-X X X ex ±.25 V hread etric X-6g X-6g X-6g X-6g X-6g X-6g X-6g X-6g X-6g O IIO U -O OUI ll dimensions for reference only O: eep reach receptacles are available for panel thicknesses up to.750 max ontact mphenol erospace for more information at

28 V0R rimp, etal V0R rimp, omposite ine Receptacle R # o complete, see how to order pages onnector ype tyle mphenol erospace ervice lass & Insert rrg ontact ype lternate osition pecial Variations V 0 RW 9-35 (453) V 0 R X-X X X (XXX) V 0 RW X-X X X (XXX) V 0 R X-X X X (XXX) III II I (V) (V) (V) (V) 2 Red band indicates fully mated R lue band indicates rear release contact retention system ode hread (lated) ll dimensions for reference only (V) (V) (V) (V) (V) (V) R U ax. (V) Z (V) Z (V).240X 3.50 X ax. (V) ±.00 (V).280 I U 7. I U V R ±.00 (V) (V) (V) Z ax (V) Z ax (V) VIW OR IZ 8 OXI OY, RIV O.86 X 2.87 X (V).909 X X (V) VIW OR IZ 8 WIX OY, RIV O.037 X X (V).084 X X (V) ±.00 (V) ±.00 (V) ode (V) (V) ax. (V) ax. (V) ±.25 (V) ±.00 (V) V hread etric Z ax (V) Z ax (V) ±.25 (V) ±.25 (V) (V) (V) Inches ±.005 (V) illimeters X-6g X-6g X-6g X-6g X-6g X-6g X-6g X-6g X-6g ±.3 (V) III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts ontact mphenol erospace for more information at

29 mphenol erospace V09R rimp, etal lange ounting lug I II III R # o complete, see how to order pages onnector ype tyle ervice lass & Insert rrg ontact ype lternate osition pecial Variations V 09 RW 9-35 (453) V 09 R X-X X X (XXX) igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix X 9.2 X U Q R.38-32U-2 I OI.005 lue band indicates rear release contact retention system oded.3 hread (lated) ±.060 R R Q ia. ax VIW OR IZ 8 OXI OY, RIV O.656 X X VIW OR IZ 8 WIX OY, RIV O.797 X X Inches illimeters ll dimensions for reference only esignates true position dimensioning ** artially tooled. onsult mphenol erospace for availability R ia ±.005 9** ** oded ±..52 Q ia. ax R ia ±.3 9** ** ontact mphenol erospace for more information at

30 V02Y (/2) ermetic tainless teel ox ounting Receptacle R # o complete, see how to order pages onnector ype tyle mphenol erospace ervice lass & Insert rrg ontact ype lternate osition pecial Variations V 02 Y 9-35 (453) V 02 Y X-X X X (XXX) / 2 X X-X X X III II I 2 R 2 R2 2 Red band indicates fully mated O: onsult mphenol erospace for availability of non-glass-sealed versions with printed circuit tail contacts. 4 oded hread (lated) 4 R R R R2 ± X 6.35 X ±.008 ± oded R R2 ±.25 ±.20 Inches illimeters ± III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts ll dimensions for reference only esignates true position dimensioning ontact mphenol erospace for more information at

31 I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix mphenol erospace R # o complete, see how to order pages Red band indicates fully mated. 059 dia min..5 dia min. 3 lockwire holes ormed lockwire hole design (6 holes) is optional. code hread lass (lated) V07Y (/23) ermetic tainless teel am ut Receptacle ax R I.062 I.25 X.57 I 3.8 X R R IZ 9/ IZ 3/ X 5.08 X ex ax ±.00 O IIO U -O OUI Inches onnector ype tyle ervice lass & Insert rrg ontact ype lternate osition code ax pecial Variations V 07 Y 9-35 (453) V 07 Y X-X X X (XXX) / 23 X X-X X X ex ax ± illimeters ll dimensions for reference only shaped panel cut-out dimensions 34 ontact mphenol erospace for more information at

32 VIY (/25) ermetic tainless teel older ounting Receptacle Red band indicates fully mated ode hread lass (lated) Red band indicates fully mated R R R R ia Inches.375 X 9.53 X Inches ia VIY (/27) ermetic, tainless teel Weld ounting Receptacle.375 X 9.53 X ode R # mphenol erospace o complete, see how to order pages onnector ype tyle ervice lass & Insert rrg ia illimeters ontact ype V I Y 9-35 (453) V I Y X-X X X (XXX) / 25 X X-X X X illimeters ia R # o complete, see how to order pages onnector ype tyle ervice lass & Insert rrg ontact ype lternate osition lternate osition pecial Variations pecial Variations V I Y 9-35 (453) V I Y X-X X X (XXX) / 27 X X-X X X III II I III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient ode hread lass (lated) ia ll dimensions for reference only ode ia igh peed ontacts ontact mphenol erospace for more information at

33 mphenol erospace eries III, V reakaway ail afe onnectors Quick-isconnect with an xial ull of anyard I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix mphenol ri-tart reakaway ail afe onnectors provide unequaled performance in environments requiring instant disengagement. esigned to provide quick disconnect of a connector plug and receptacle with an axial pull on the lanyard, the reakaway ail afe connector family offers a wide range of electrical and mechanical features: Instant decoupling and damage free separation ompletely intermateable with standard receptacles (/20 and /24) Inventory support commonality through the use of standard insert arrangements and contacts reakaway un-mating is initiated by applying a pull force to the lanyard which causes the operating sleeve on the plug to move away Y 2 Y 6 Y from the receptacle. oupling segments mphenol offers a variety of lanyard plug styles including I--760 on the plug then move away from the mating types, 2 and 6 for tores anagement applications. receptacle while expanding, thus releasing the receptacle. fter completion of the un-mating sequence, spring compression returns the sleeve and segments to their original positions. Un-mating of the plug may also be accomplished by normal rotation of the coupling ring without affecting the breakaway capability. he ri-tart reakaway ail afe connector exceeds the I-pec eries III requirements for I/ shielding and features include: olid metal-to-metal coupling I grounding fingers onductive finishes mphenol reakaway ail afe connectors are qualified to I--/29, /30 and /3 (for I--760 tores anagement applications). In fact, mphenol offers more qualified reakaway shell size and insert combinations than any other Q supplier. In addition to standard reakaway connectors, mphenol also manufactures custom breakaway connectors including those with: ighly durable non-metallic operating sleeves in a variety of lengths and diameters Increased pull-force capability ow-profile designs ustom lanyard lengths and backshells ow force separation capabilities ow insertion/separation force contacts on-cadmium finishes Whether you need a standard reakaway, one of our custom reakaways or, a unique reakaway design, please contact your local mphenol representative. ontact mphenol erospace for more information on breakaway, quick-disconnect connectors. Other mphenol circular families (I , I ) also offer breakaway quick-disconnect connectors. ee accessories for breakaway connectors on page 90. reakaway with oax ontacts pecial configuration ail afe used on space telescope application. anyard is replaced by a swivel ring for remote disconnect and wing arms have been added for manual actuation accessibility by gloved astronauts. 36 ontact mphenol erospace for more information at

34 /29 & /30 eries III V reakaway ail afe-rimp, etal anyard Release lug R # o complete, see how to order pages onnector ype tyle & Insert rrg mphenol erospace anyard ength ode ontact ype/ lternate Insert Rotation X-X X X X-X X X X-X X X (ins Only) (ockets Only) III II I.374 X 9.50 X OUR V OV URI UI R R YR U U I.500 ± ±.79 I R V R RI.78 X X YR (ee anyard ength able).359 X 9.2 X U X X III 505 atrix 2 atrix yle rimp Rear Release atrix lue band indicates rear release contact retention system Inches rinted ircuit oard ode ll dimensions for reference only ax ax ccessory ia ode ax ax ccessory ia. illimeters V hread etric X.0-6g X.0-6g X.0-6g X.0-6g X.0-6g X.0-6g X.0-6g X.0-6g I ilter ransient igh peed ontacts ontact mphenol erospace for more information at

35 I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix mphenol erospace asy teps to build a part number... ilitary ommercial asic art# & Insert rrg. ode - Insert rrangement ilitary - Insert rrangement V /29 & /30 eries III reakaway ail afe anyard Release lug O umber pec heet ervice lass Insert anyard ength lternate eying refix umber rrangement ode osition / 29 6 tep. O umber refix / designates I--, eries III, ri-tart onnector tep 2. elect a pecification heet umber 29 esignates anyard Release lug with pin contacts 30 esignates anyard Release lug with socket contacts tep 4. & 5 Insert vailability ervice Rating otal ontacts tep 3. elect a ervice lass ontact oax 8 oax 88/ * I * * I * I * I * * I * II * I * I * I * * I I II I I II I I I II I I II I * * I I /winax winax I I I I * I * I I W esignates electroless nickel plated aluminum, optimum I shielding effectiveness 65d@0 z specification min., 48 hour salt spray, 200 esignates corrosion resistant olive drab cadmium plate aluminum, 500 hour extended salt spray, I 50d@0 z specification min., 75 8 winax *ot il Qualified 38 ontact mphenol erospace for more information at

36 /29 & /30 eries III V reakaway ail afe anyard Release lug mphenol erospace tep 6. ilitary/ ommercial anyard ength ode able II anyard ength (in.) ±.236 anyard ength (mm) ± 6.0 anyard ength ode or art umber I R U V W X Y Z tep 7. ilitary lternate eying osition or alternate positions of connector (to prevent cross-mating) see alternate positioning on page 24. ( indicates normal) asy teps to build a part number... ommercial I ( ) & ( ) Ordering procedure for example part number is shown below: onnector ype & Required anyard Identification Insert rrg. ode ield ength ode ervice lass tep. elect a ervice lass 88 9 ontact ype/lternate eying osition esignates corrosion resistant olive drab cadmium plate over nickel, 500 hour extended salt spray, I 0 z specification min., 75 esignates electroless nickel plated aluminum, optimum I shielding effectiveness 0 z specification min., 48 hour salt spray, 200 hese are standard finishes. onsult mphenol erospace, idney, Y for other variations. tep 2. elect a onnector ype Identification 5565 esignates I--, eries III ri-tart anyard Release lug tep 3. elect a ommercial & Insert rrangement ode I--, see insert availability chart on page 38. tep 4. Required ield 0 he required field is always a 0 tep 5. elect a anyard ength ode ee able II (to the left) for lanyard length code number. tep 6. elect a ontact ype/lternate eying osition designates pin, designates socket for normal positioning of contacts. When an alternate position of the connector is required to prevent cross-mating, a different letter (other than or ) is used. ee alternate positioning on page 24, then convert to mphenol ommercial coding by the following chart. in ontacts ocket ontacts etter mphenol letter etter mphenol etter (normal) (normal) I R III II I III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts ontact mphenol erospace for more information at

37 I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix mphenol erospace.00 X 2.54 X OUR V OV URI UI R R X X. I ** RI R 37X.0-6g0.00R.687 X X X 5.56 X YR (ee anyard ength able) X X. I Insert rrangement.359 X 9.2 X X 5.00 X U.374 X 9.50 X OUR V OV URI UI R R X X. I Y 6 Y 2 RI R 37X.0-6g0.00R.280 I 7. I U R X X YR (ee anyard ength able).359 X 9.2 X X 5.00 X U in ontact ata for I--760 ervice Rating otal ontacts /3 for I--760 eries III V reakaway ail afe rimp, etal anyard Release lug I O OY, IZ 25 OY ** RI R 37X.0-6g Y (OR ).78 X X X X 0.00R YR (ee anyard ength able) lue band indicates rear release contact retention system ** anyard pulled taut against a.500 ±.3 dia. andrel ll dimensions for reference only ontact (oax) 8 (winax) rrg. umber Insert rrangement ontacts for attern umber of ervice ontact tandard ontacts ontacts ontacts Rating ocation in ocket 3 8 winax,, 39029/ / oax 2, / / ervice Rating otal ontacts W, / /03-559,,,,,,,, R,, U, Y, Z,,,, V, X,, 4, 6, / / ontact 20 0 (power) / / X 9.2 X X 68.7 X U IR VIIIY I /3 OR I--760 *art number reference. o complete, see how to order page 4. / /76 ype / /9 ype /9 3W-625-XXXX ype *o order by ommercial art numbers consult mphenol. ri-tart anyard eparation orces traight lug (lbs. max.) X R Y Z W 6 5 egree ull (lbs. max.) U V rimary Interface ignal et 25- uxiliary ower ignal et ontact egend 8 (twinax) 0 (power) 2 (coax) ontact mphenol erospace for more information at

38 /3 for I--760 eries III V reakaway ail afe for tores anagement pplications- anyard Release lug OW O ORR - Y IIRY R UR I /3 Ordering procedure for example part number /3W20 is shown below: asy teps to build a part number... ilitary mphenol erospace O umber pec heet ervice anyard Insert ontact tyle lternate eying ype refix umber lass ength ode rrangement osition umber / 3 W 20. elect a O umber refix / esignates I--, eries III ri-tart onnectors 2. pecification heet umber 5. elect an Insert rrangement Only or 20 are available contact arrangement numbers. ee page ontact tyle & are Valid III II I III 505 atrix 2 atrix yle rimp Rear Release atrix 3 W anyard ength (in.) ±.236 esignates esignates anyard Release lug for I--760 with pin contacts 3. elect a ervice lass esignates lectroless nickel plated aluminum, optimum I shielding effectiveness 0 z specification min., 48 hour salt spray, 200 orrosion resistant olive drab cadmium plate aluminum, 500 hour extended salt spray, I 0 z specification min., elect a anyard ength ode anyard ength (mm.) ± 6.0 anyard ength ode for art umber I lternate eying osition esignates Replaces the no designation option in the I on revision and earlier revision of the il-pec. esignates supplied less contacts. esignates Is required for normal position. 8. ype umber ype, 2 or 6. ee drawings on page 40. or accessories for lanyard release plugs see page 90. rinted ircuit oard I ilter ransient igh peed ontacts ontact mphenol erospace for more information at

39 I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix mphenol erospace ew ybrid anyard reakaway ail afe connector with a composite thermoplastic outer operating sleeve for greater durability. his new hybrid breakaway is the breakaway of choice for the avy -8 program. mphenol s hybrid lanyard design offers greater durability over aluminum and composite designs because of its ability to handle abuse taken after weapons release. Other advantages include: ower profile compared to full metal breakaway ail afe connectors ess weight his ybrid reakaway meets the applicable requirements of I--/3 including random & sine vibration, ice resistance, fluid immersion and hydrolytic stability tests. (est reports are available upon request). urrently the hybrid breakaway is available in shell sizes 25 and 7. It uses standard inserts available for breakaway plugs sizes 25 and 7, and is also available with inserts and 25- for I onsult mphenol erospace for ordering of the new hybrid breakaway connectors. hese hybrid connectors will accommodate the standard backshells for breakaway connectors shown on page 90. mphenol provides a reakaway Rail aunch connector that is designed for use on aircraft that carry rail launch missiles such as R. hese connectors are designed for blindmating of stores on rail launch applications. hey consist of a buffer plug and a missile receptacle that meet the specifications of I--760 tores anagement. Other features and benefits include: esigned to I specifications ayonet and push pull coupling Use standard I-- crimp termination with power, coax and twinax contacts also available uffer provides flame barrier uffers are replaceable onsult mphenol erospace for more information and ordering. ype ybrid reakaway eries III rimp, etal with omposite Operating leeve, nd ower rofile anyard Release lug ew ybrid anyard Release lugs (etal inside shells and omposite, lower profile outer sleeves) tores anagement ype II, Rail aunch lugs and receptacles that meet I--760 tores anagement ype II Rail aunch onnectors 42 ontact mphenol erospace for more information at

40 igh ensity onnectors Introduction mphenol erospace igh ensity connector that has the connections... he family of connectors was designed to work with existing mil-specified shells. o the end users familiar with standard connectors, this family of high density connectors will look, feel, and perform just like the mil-qualified connectors. Utilizing an existing mil-qualified size 23 contact and mil-qualified shells, the new system will be, in many cases, a drop-in connector. ven though the has 30% more contacts, it still performs to minimum electrical requirements of standard connectors. igh ensity Interconnects oes from 9 to 87 contacts! luminum omposite tainless teel ealed iltered III II I III 505 atrix 2 atrix yle rimp Rear Release atrix or more information hdinfo@amphenol-aao.com pecifications, descriptions and illustrations in this literature are as accurate as known at the time of publication, but are subject to change without notice s (ront of in Insert hown) rinted ircuit oard I ilter ransient igh peed ontacts ront of in Insert hown. ontact mphenol erospace for more information at

41 mphenol erospace igh ensity onnectors ow to Order I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix RI O IZ WIR RR R/URR IIY RI RR IR RI RR 39029, IZ W 5.0 (Inches) epth (Inches) W W W.5 ote: Wire insulation diameter greater than inches is too large for the extraction tool to work properly. onnector damage is possible. ontact art umbers rimp ool - aniels 22520/ ockets ositioner - aniels 22520/2-3 ins 23 ins aniels 22520/2-6 ockets ealing lugs ( ) Insertion/Removal ool - lenair emperature Range: Insulation Resistance: ielectric Withstanding Voltage: -65 to megohms min.@ 500 V ea level asy teps to build a part number... V V () onnector ype esignates ri-tart eries onnector ack panel mounted receptacle otted version esignates 00 Wall mount receptacle 0 ine receptacle 06 traight plug 07 am nut receptacle R RW R Z Insert rrangement tyles ervice lass Insert arrangement ontact ype lternate ositions ()V 06 RW 23-5 (25) tep. elect a onnector ype tep 2. elect a tyle tep 3. elect a ervice lass esignates lectroless nickel plated aluminum, optimum I shielding effectiveness 0z specification min., 48 hour salt spray, 75 orrosion resistant olive drab cadmium plate aluminum, 500 hour extended salt spray, I 0z specification min.,75 orrosion resistant stainless steel, plus 500 hour salt spray resistance, I 45 0 z specification min., 75 urmalon plated, alternative to admium. orrosion resistant, 500 hour extended salt spray, I 0z specification min. without R 6 Zinc-ickel lternative to admium corrosion resistant, 500 hour salt spray, onductive, -65 to +75 tep 4. elect a Insert rrangement s are I--, eries III, plus newer igh ensity insert arrangements tep 5. elect a ontact ype esignates in contacts ocket contacts Insert rrangement R R R R I YWY U (front face shown) R (front face shown) I YWY tep 6. elect an lternate osition,,,,, blank for normal ey & keyway arrangement identification letter R or R or R or R or * , * , and * and , * , and plug with a given rotation letter will mate with a receptacle with the same rotation letter. he angles for a given connector are the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. tep 7. elect a ontacts in ocket esignates tail stickout.00 nominal +/-.040 inch 5 5 tail stickout.50 nominal +/-.040 inch 2 2 tail stickout.200 nominal +/-.040 inch tail stickout.250 nominal +/-.040 inch 44 ontact mphenol erospace for more information at

42 mphenol erospace ew, eatured roducts mphenol erospace mphenol has become the leader in interconnection products through its long history of engineering expertise for product solution solving. ew and innovative solutions are under development every day within our highly skilled engineering departments who are teamed with marketing product managers and production specialists. hey are always striving to meet new customer requirements in ever changing markets. he teams have a customer-driven approach to produce the end result: quality interconnect products that meet or exceed customer demands. ew/eatured reakaway ybrid, ow rofile anyard Release lug age 42 ew ybrid anyard reakaway ail afe onnector with a composite thermoplastic outer operating sleeve for greater durability. olution: avy -8 program needed a break away plug that would have greater durability in weapons release application. ew/eatured atrix I--505 with RO ontacts age 93 special design of the atrix I--505, eries II connectors has added high amperage with the RO contacts in the plug instead of standard rear release crimp contacts. olution: igher amperage capability in atrix I--505 ew/eatured RI 80 onnectors age 356 esigned for use in mphenol RI 80 fiber optic connectors - manufactured to comply with RI 80. enderless terminus allows for use on both sides of a connector. ew/eatured ew (igh ensity, rimp) lugs and receptacles age 43, 44 he family of connectors was designed to work with existing il-specified shells. he has 30% more contacts, it still performs to minimum electrical requirements of standard connectors. olution: 30% more contact density in eries III s ew/eatured ilter onnector with igh ensity atterns age 289 ew igh ensity atterns are available in ilter connectors in standard il-pec or filter length shells. hey provide 30% more contact that standard insert arrangement patterns. ee page 43 for ordering information. olution: igher contact density and custom stand-off shell designs ew/eatured errule onnectors age 359 mphenol offers a multi-channel circular connector with high density fiber optics. igh fiber density in a relatively small circular connector package with all the advantages of the I- - series III connector. III II I III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts olution: iber Optic ermini & onnector that meet RI specifications olution: igher ensity in I-- ontact mphenol erospace for more information at

43 I-- eries III, II, I, and ccessories, ontacts, and ools mphenol erospace eries III V eries II eries I mphenol erospace is the leader in Interconnect solutions and provides companies with a product portfolio of connectors, accessories, cable assemblies and system integration for most applications across various industries. With connectors conforming to ilitary, erospace and Industrial standards in U, urope and sia, mphenol assumes the leadership in meeting the interconnect needs of these market segments. III II I III 505 atrix 2 atrix yle rimp Rear Release atrix I-- eries III V ri-tart ackshells ccessories ummy ontacts Wire ombs Receptacle rotection ap lug rotection ap ummy Receptacle able lamps ontacts-rinted ircuit oard Wire Wrap eader ssembly pplication ools rimp ools Insertion ools Removal ools I-- eries II Receptacle rotection ap lug rotection ap train Relief (older/rimp ype) ontacts-rinted ircuit oard Wire Wrap eader ssembly pplication ools rimp ools Insertion ools Removal ools Receptacle rotection ap lug rotection ap ummy Receptacle able lamps pplication ools I-- eries I Receptacle rotection ap lug rotection ap ummy Receptacle able lamps ontacts-rinted ircuit oard Wire Wrap eader ssembly pplication ools rimp ools Insertion ools Removal ools rinted ircuit oard I ilter ransient igh peed ontacts rimp ools Insertion ools Removal ools ontact mphenol erospace for more information at

44 mphenol erospace, eries III V reakaway ail afe ackshells, ummy ontacts, Wire ombs I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix eries III V mphenol offers a full range of accessories that are designed to enhance the performance of mphenol reakaway connectors. ow rofile ackshells in shell size 25 with the following features: Olive drab cadmium finish 90 degree termination ow profile design with three heights ranging from.00 to.660 Rear access covers to help ease harness assembly and repairability mphenol part numbers: XXX ummy ontacts vailable in size 2 and size 8 rovide a cost effective alternative for sealing unused contact cavities 8 part number: part number: Wire ombs vailable for the insert pattern to help to stabilize and prevent contact side loading mphenol part number: XXX or information on how to order these accessory products for reakaway ail afe connectors consult mphenol erospace. ackshells are offered for use with reakaway ail afe onnectors in three heights. ccessory products for reakaway onnectors: ummy ontacts and Wire ombs 90 ontact mphenol erospace for more information at

45 I--, eries III V Receptacle rotection ap mphenol erospace eries III V III II I * XXX.578 X 4.68 X * XXX.797 X X.797 X X ROX ROX * XXX ROX ROX * XXX ROX ROX III 505 atrix 2 atrix yle rimp Rear Release atrix * o complete order number, add shell size and suffix number. or example, shell size with olive drab cadmium nickel base, hread lass onsult mphenol erospace for availability of stainless steel protection caps. ll dimensions for reference only. or protection caps, see page 95. ia. ax. Inches ia inish Olive rab, admium, ickel base lectroless ickel 0-o uffix -XX9 -XX illimeters ode ia. ax. ia rinted ircuit oard I ilter ransient igh peed ontacts ontact mphenol erospace for more information at

46 mphenol erospace I--, eries III V lug rotection ap I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix eries III V * XXX * XXX.66 X X.66 X X * o complete order number, add shell size and suffix number. or example, shell size with olive drab cadmium nickel base, Inches hread lass onsult mphenol erospace for availability of stainless steel protection caps. ll dimensions for reference only. or protection caps, see page 95. ia ia. ax inish Olive rab, admium, ickel base lectroless ickel 0-o uffix -XX9 -XX ROX ROX ROX ROX ode ia illimeters ia. ax ontact mphenol erospace for more information at

47 I--, eries III V ummy Receptacle mphenol erospace eries III V art number reference. ee note below to complete. * XXX III II I * o complete order number, add shell size and suffix number. or example, shell size with olive drab cadmium nickel base, oded hread (lated) 2 R 2 R R R 2 ±.00 R ± W ±.00 ± inish Olive rab, admium, ickel base lectroless ickel 0-o uffix -XX9 -XX oded R R 2 ±.25 Inches W W ±.25 illimeters III 505 atrix 2 atrix yle rimp Rear Release atrix rinted ircuit oard I ilter ransient igh peed ontacts ll dimensions for reference only esignates true position dimensioning ontact mphenol erospace for more information at

48 mphenol erospace I--, eries III V able lamps I II III igh peed I ilter rinted III ontacts ransient ircuit oard atrix yle atrix 2 rimp Rear Release atrix eries III V * o complete order number, see suffix chart below. xamples: lamp with metal coupling nut for shell size with olive drab cadmium nickel base, traight tyle * XXX metal coupling 90 egree lbow tyle * XXX metal coupling ode in. ia. able 2 ax. ia. able 2 ax. U ax. ia. ax. U ia. ax. Inches ax inish 0-o uffix Olive rab, -XX9 admium ickel ase lectroless ickel -XX ode in. ia. able 2 ax. ia. able V R 2 ax. U ax. V hread etric VIW V R ia. ax. ia. ax. illimeters ax X X X X X X X X X ll dimensions for reference only. 94 ontact mphenol erospace for more information at

49 I--, eries III V ontacts, ealing lugs, rotective aps mphenol erospace R 500 Y O OR V V, & ontact V/V ins V/V ockets ilitary o. upersedes ilitary o. upersedes 8 (oax)* 39029/ / (ower) ontact actory 8 (winax)** 39029/ / 39029/9-530 / 0 (ower) 39029/ / 39029/ / / / / / / / / / / / / / 0 / / / / bove part numbers include standard 500 cycle finish designation - gold plating over suitable underplate in accordance with or other finish variations, consult mphenol. * or use with R80/U and R95/U cable. or other size 8 coax or optional sizes 2 and 6 coax contacts available for use in I-- eries III connectors, see the igh peed ontact section of this catalog consult mphenol, idney, Y 500 Y O OR V, & eries III V ** or use with 7/ cable. or other contact options available for use in ri-tart connectors, (wire wrap, thermocouple, fiber optic) consult mphenol. ontact V ins V ockets ommercial o. ilitary o. upersedes ommercial o. ilitary o. upersedes X 39029/ X 39029/ X 39029/ X 39029/ X 39029/ X 39029/ X 39029/ X 39029/06-64 III II I III 505 atrix 2 atrix yle rimp Rear Release atrix I ROIO lug Receptacle I U ontact ommercial o. ilitary o. 8 (oax) / 8 (winax) / 8 (ower) (ower) / ode ROIO lug rotection ap Receptacle rotection ap 9 /32W9X* /33W9X* /32WX* /33WX* 3 /32W3X* /33W3X* 5 /32W5X* /33W5X* 7 /32W7X* /33W7X* 9 /32W9X* /33W9X* 2 /32W2X* /33W2X* 23 /32W23X* /33W23X* 25 /32W25X* /33W25X* * o complete order number, replace X with applicable letter as follows: R - designates eyelet type - designates washer type metal protection caps are supplied with service class W which designates corrosion resistant olive drab cadmium plate aluminum. onsult mphenol, idney, Y for more detailed information on ordering etal protection caps. rinted ircuit oard I ilter ransient igh peed ontacts ontact mphenol erospace for more information at

50 igh peed I ilter rinted III ransient ircuit oard rimp Rear ontacts Release atrix atrix yle atrix 2 I II III mphenol erospace eries III V eries II eries I ounts to all I-- and *I onnectors I--, eries III V, II, I Universal eader ssembly for lex rint or oard ermination of tail connectors to a flex print or a printed circuit board represents a major cost in the manufacturing process for users. When adding flex or printed circuit board assemblies to an expensive filter or filter/transient protection connector, the total cost of a failed solder joint, a bent pin, or an unanticipated electrical failure becomes prohibitive. he universal header assembly from mphenol provides for easy separation of the connector from the board on these occasions. he header assembly is comprised of a short pin/socket contact. he tail end of the contact is soldered to the through hole of the flex or printed circuit board. he socket is embedded in the insulator, making electrical contact with the printed circuit tail of the connector. eader ssemblies rovide ost avings Incorporation of the header assembly provides the user with time and cost saving potentials. hese header assemblies can be vapor phase or wave soldered to flex or printed circuit boards prior to the receipt of the I/ connector. eaders can be installed to standard connectors, allowing for electrical testing that would adversely affect the sensitive diodes, OV s or capacitors in the I/ connectors. xpensive connector assemblies can be easily removed from and reattached to the header assembly as the manufacturing process dictates. ounting pplications modifications are recommended, but are not necessary. he header assembly can be attached to connectors with standard flange placement or directly to the circuit board. he ideal application would involve either a single flange moved all the way to the rear of the connector or a double flange. inch nuts can be installed in either flange to allow easier mounting to the panel or the header assembly. he forward flange would mount the connector to the panel; the rear flange would be used to mount the header assembly. Various types of captivated or loose attaching screws can be utilized for unique applications. mphenol universal headers are slotted to allow mounting to all series of I-- or I * connectors without special alterations. hey are of similar dimension as the flange of the mounting connector and are approximately.85 inches (4.70 mm) thick. * or information on eader ssemblies for I connector consult mphenol, idney Y. eaders provide easy separation of the connector from the board. ylindrical onfiguration 3 stickout dimensions are available. 22 contacts use.75 thick headers 6 to 20 contacts use.95 thick headers onsult mphenol, idney Y for additional configurations. eaders for cylindrical connectors accommodate up to 28 pins. or I-- insert arrangements chart see pages 4-7 and insert drawings on pages 8-4. ounting to Rectangular RI onnectors eaders for RI connector arrangements accommodate up to 50 pins onsult mphenol, idney, Y for RI configurations and detailed dimensions. aterials ody is molded or machined from R-4. lectrical engagement areas of the header contact are plated with inches minimum of gold over inches minimum of nickel. ee drawing of standard header on next page. 06 ontact mphenol erospace for more information at