DIN Rail Mounted Terminals & Accessories

Transcription

1

2 DIN Rail Mounted Terminals & Accessories PAGE PAGE STANDARD CONTA-CONNECT RANGE 253 NEW! CABLECRAFT ABS-S ENCLOSURES 260 DOUBLE & TRIPLE CONTA-CONNECT RANGE 254 NEW! CABLECRAFT ALUMINIUM ENCLOSURES 260 MINIATURE CONTA-CONNECT RANGE 255 NEW! CABLECRAFT ABS-O ENCLOSURES 26 KNIFE DISCONNECT TERMINAL 255 NEW! CABLECRAFT GEL-SEAL 26 EARTH TERMINALS 256 NEW! MOUNTING PLATES 262 FUSE HOLDER & INSULATING CLOSURE 256 NEW! EXTENSION FRAMES 262 NEW! MOUNTING LUGS 262 CONTA-CONNECT DIN RAIL ACCESSORIES DIN RAIL & CUTTING TOOL

3 DIN Rail Mounted Terminals & Accessories Conta-Connect DIN Rail Mounted Terminals D STANDARD CONNECTOR RANGE Cablecraft Conta-Connect rail mounted terminal range and accessories are ideal for cable sizes from 2.5mm 2 to 95mm 2. They are tested, approved and comply with (IEC) and European (EN) standards. Conta-Connect feed-through terminal blocks are suitable for both top hat 35mm or 32mm G rail mounting. 253 RATING VOLTAGE/CURRENT * Part numbers with /35 are suitable for 35mm top hat rail ONLY. PART NO. IEC CONDUCTOR mm 2 /AWG PACK RK 2.5 BEIGE 800/ /22-2 RK 2.5 BLUE 800/ /22-2 RK BEIGE 800/ /22-2 RK 2.5-4/35 GREY* 800/ /22-2 RK 2.5-4/35 BROWN* 800/ /22-0 RK 2.5-4/35 BLACK* 800/ /22-0 RK BLUE 800/ /22-0 RK 6-0 BEIGE 800/ /22-6 RK 6-0/35 GREY* 800/ /22-6 RK 6-0/35 BROWN* 800/ /22-6 RK 6-0/35 BLACK* 800/ /22-6 RK 6-0/35 BLUE* 800/ /22-6 RK 6 BEIGE 800/ /0-4 RK 6 GREY 800/ /0-4 RK 6 BROWN 800/ /0-4 RK 6 BLACK 800/ /0-4 RK 6 BLUE 800/ /0-4 RK 35 BEIGE 800/ /2-2 RK 50 BEIGE 000/ //0-6 RK 95 BEIGE 000/ /4/0-2

4 D DIN Rail Mounted Terminals & Accessories Conta-Connect DIN Rail Mounted Terminals DOUBLE DECKER CONNECTORS Conta-Connect feed-through terminal blocks are suitable for both top hat 35mm or 32mm G rail mounting. RATING VOLTAGE/CURRENT PART NO. IEC CONDUCTOR mm 2 /AWG PACK RKD / /22-2 RKD 4 500/ /22-0 TRIPLE DECKER CONNECTORS Conta-Connect feed-through terminal blocks are suitable for both top hat 35mm or 32mm G rail mounting. RATING VOLTAGE/CURRENT PART NO. IEC CONDUCTOR mm 2 /AWG PACK IK / /22-2 IKD 2.5/Q 500/ /

5 DIN Rail Mounted Terminals & Accessories Conta-Connect DIN Rail Mounted Terminals D MINIATURE CONNECTORS Conta-Connect miniature terminal blocks offer tremendous space advantage as demanded by certain wiring configurations. RATING VOLTAGE/CURRENT PART NO. IEC CONDUCTOR mm 2 /AWG PACK RK.5-4/5 500/ /22-0 RK.5-4/5 BLUE 500/ /22-0 SL 4/5 (Miniature Earth) 0.2-4/22-0 KNIFE DISCONNECT TERMINAL Conta-Connect knife disconnect terminal. Suitable for both 35mm top hat and 32mm G rail mounting. RATING VOLTAGE/CURRENT PART NO. IEC CONDUCTOR mm 2 /AWG PACK TRK.5 400/ /

6 D DIN Rail Mounted Terminals & Accessories Conta-Connect DIN Rail Mounted Terminals EARTH TERMINALS For symmetrical (top hat) rail only. Enclosed both sides, a centre screw tightens on both sides of the rail to give a good electrical connection. PART NO. CONDUCTOR mm 2 /AWG PACK SL 4/5 (Miniature) 0.2-4/22-0 SL 4/ /22-0 SL 0/ /20-6 SL 6/35N 6/0-4 SL 35/35N 35/2-2 FUSE HOLDER Universal foot, fits symmetrical (top hat) and G rail. Takes 20mm fuse up to 6.3A. Lever lifts to isolate and remove fuse. PART NO. RATING VOLTAGE/CURRENT DESCRIPTION IEC CONDUCTOR mm 2 /AWG PACK STK Fuse Holder 2500/ /22-2 AP-S2 Insulating Closure

7 DIN Rail Mounted Terminals & Accessories Conta-Connect DIN Rail Accessories D Conta-Connect DIN rail mounted accessories are for use with our range of standard, double, triple and miniature connectors. END STOP FOR TERMINAL TYPE PART NO. DESCRIPTION PACK MINIATURE CONNECTOR: RK.5-4/5 ES 5 End Stop STANDARD CONNECTOR: RK 2.5, RK 2.5-4, RK 6-0, RK 6, RK 35 ES 35 End Stop DOUBLE CONNECTOR: RKD 2.5, RKD 4 ES 35 End Stop TRIPLE CONNECTOR: IK 2.5, IKD 2.5 ES 35KST End Stop END PLATE FOR TERMINAL TYPE PART NO. DESCRIPTION PACK MINIATURE CONNECTOR: RK.5-4/5 AP.5-4 End Plate STANDARD CONNECTOR: RK 2.5, RK 2.5-4, RK 6-0 AP End Plate STANDARD CONNECTOR: RK 6 AP 6 End Plate STANDARD CONNECTOR: RK 35 AP 35 End Plate DOUBLE CONNECTOR: RKD 2.5, RK 4 AP 4 End Plate TRIPLE CONNECTOR: IK 2.5 AP/I 2.5 End Plate TRIPLE CONNECTOR: IKD 2.5 AP/I D2.5 End Plate PARTITION PLATES & INSULATION PLATES FOR TERMINAL TYPE PART NO. DESCRIPTION PACK MINIATURE CONNECTOR: RK.5-4/5 TW.5-4 Partition Plate STANDARD CONNECTOR: RK 2.5, RK 2.5-4, RK 6-0, RK 6, RK 35 TW2.5-0 Partition Plate DOUBLE CONNECTOR: RKD 2.5, RKD 4 TW2.5-0 Partition Plate TRIPLE CONNECTOR: IK 2.5, IKD 2.5 TW2.5-0 Partition Plate STANDARD CONNECTOR: RK 6 TW6 Partition Plate STANDARD CONNECTOR: RK 35 TW35 Partition Plate DOUBLE CONNECTOR: RKD 2.5, RKD 4 TRS3 Insulation Plate TRIPLE CONNECTOR: IK 2.5, IKD 2.5 TRS3 Insulation Plate 257

8 D DIN Rail Mounted Terminals & Accessories Conta-Connect DIN Rail Accessories TWO POLE SHORTING LINK FOR TERMINAL TYPE PART NO. DESCRIPTION PACK MINIATURE CONNECTOR: RK.5-4/5 Q2-6 Two Pole Shorting Link INSULATED CROSS CONNECTOR FOR TERMINAL TYPE PART NO. DESCRIPTION PACK STANDARD CONNECTOR: RK QI0-6 Insulated Cross Connector DOUBLE CONNECTOR: RKD 2.5, RKD 4 QI0-6 Insulated Cross Connector STANDARD CONNECTOR: RK 6-0 QI0-8 Insulated Cross Connector CROSS CONNECTOR FOR TERMINAL TYPE PART NO. DESCRIPTION PACK STANDARD CONNECTOR: RK 2.5 Q0-5 Cross Connector DOUBLE CONNECTOR: RKD 2.5 Q0-5 Cross Connector STANDARD CONNECTOR: RK Q0-6 Cross Connector DOUBLE CONNECTOR: RKD 4 Q0-6 Cross Connector STANDARD CONNECTOR: RK 6-0 Q0-8 Cross Connector STANDARD CONNECTOR: RK 6 Q0-2 Cross Connector STANDARD CONNECTOR: RK 35 Q0-6 Cross Connector TRIPLE CONNECTOR: IK 2.5, IKD 2.5 Q0-IK Cross Connector BLANK TERMINAL MARKERS FOR TERMINAL TYPE PART NO. DESCRIPTION PACK STANDARD CONNECTOR: RK 2.5 DOUBLE CONNECTOR: RKD 2.5, RKD 4 TRIPLE CONNECTOR: IK 2.5, IKD 2.5 STANDARD CONNECTOR: RK 2.5-4, RK 6-0, RK 6, RK 35 MINIATURE CONNECTOR: RK.5-4/5 SB5/0 SB5/0 SB5/0 SB6/0 SB6/0 Terminal Marking System Terminal Marking System Terminal Marking System Terminal Marking System Terminal Marking System PRE-PRINT SERVICE AVAILABLE FOR THIS PRODUCT - SIMPLY SEND US YOUR REQUIREMENTS TO OUR PRE-PRINT DEPARTMENT - CONTACT US NOW! 258

9 DIN Rail Mounted Terminals & Accessories Conta-Connect DIN Rail & Cutting Tool D DIN RAIL PART NO. DESCRIPTION SIZE PACK TS5/ mm Slotted Rail 250 mm TS35/ mm Slotted Rail 250 mm TS35/F mm Slotted Rail metre 0 TS35/F 2000 mm Slotted Rail 2 metres 20 TSTW/250 Bracket - DIN RAIL CUTTING TOOL Suitable for 35 mm top hat DIN Rail. 350mm Long Handle Cuts DIN Rail Square Improves Productivity Clamps onto a vice or bolts on bench. Produces half cut for end stops. No burrs. Open throat with unique design and replaceable blades. PART NO. DESCRIPTION PACK DIN-CUTTER DIN Rail Cutter DIN-CUTTER-BLADE Spare Blade 259

10 D DIN Rail Mounted Terminals & Accessories Cablecraft Enclosures CABLECRAFT ABS-S ENCLOSURES Cablecraft s premium quality ABS-S range consists of small to medium size enclosures with plain sides. The base is equipped with unique slots for printed circuit boards. Suitable for demanding environments. MATERIAL BASE & COVER: ABS MATERIAL, GASKET: Polyurethane COLOUR: Grey RAL 7035 SERVICE TEMPERATURE RANGE: -40 C to +60 C IP RATING: IP66/67 WE ALSO OFFER A CUSTOMISING & ASSEMBLY SERVICE ON ALL BOXES. PART NO. DIMENSIONS W x H x D (in mm) PACK SABP0006G 00 x 00 x 60 SABP3308G 25 x 25 x 75 SABP330G 25 x 25 x 00 SABP3808G 25 x 75 x 75 SABP380G 25 x 75 x 00 SABP383G 25 x 75 x 25 SABP82508G 75 x 250 x 75 SABP8250G 75 x 250 x 00 CABLECRAFT ALUMINIUM ENCLOSURES Cablecraft s premium quality Aluminium enclosures with plain sides are recyclable and light. They have high solvent resistance, a broad temperature resistance range and excellent corrosion resistance. Aluminium MATERIAL, GASKET: Neoprene COLOUR: Grey RAL 700 SERVICE TEMPERATURE RANGE: -40 C to +00 C IP RATING: IP65 WE ALSO OFFER A CUSTOMISING & ASSEMBLY SERVICE ON ALL BOXES. PART NO. DIMENSIONS W x H x D (in mm) PACK / x 80 x / x 20 x / x 20 x / x 60 x / x 20 x / x 20 x / x 60 x

11 DIN Rail Mounted Terminals & Accessories Cablecraft Enclosures & Accessories D CABLECRAFT ABS-O ENCLOSURES Cablecraft s premium quality ABS-O range consists of medium to large size enclosures with plain sides. They are suitable for demanding environments. Mounting plates are required for this range, see page 262. MATERIAL BASE: ABS MATERIAL, GASKET: Polyurethane COLOUR: Grey RAL 7035 SERVICE TEMPERATURE RANGE: -40 C to +60 C IP RATING: IP66/67 WE ALSO OFFER A CUSTOMISING & ASSEMBLY SERVICE ON ALL BOXES. PART NO. DIMENSIONS W x H x D (in mm) PACK OABP20203G 200 x 200 x 30 OABP20303G 200 x 300 x 30 OABP20403G 200 x 400 x 30 OABP30303G 300 x 300 x 30 OABP30403G 300 x 400 x 30 OABP40403G 400 x 400 x 30 OABP30603G 300 x 600 x 30 OABP40603G 400 x 600 x 30 CABLECRAFT GELSEAL GelSeal;a re-enterable insulating clear gel, designed for the protection of electrical and electronic enclosures, boxes, terminal blocks, trunking, pipes and mechanical parts against water, moisture, dirt, dust and mechanical shock. For more information see page 367. GELSEAL FEATURES Non-Toxic Environmentally Friendly Re-enterable Long Shelf Life High Dielectric Properties High Level of Adhesion IP 68 Rating PART NO. DESCRIPTION PACK GEL-SEAL Re-enterable Gel Seal - 300ml GEL-SEAL Re-enterable Gel Seal - Litre 26

12 D DIN Rail Mounted Terminals & Accessories Cablecraft Enclosures & Accessories CABLECRAFT MOUNTING PLATES FOR ABS-O ENCLOSURES Mounting plates are made of galvanized steel as standard. The material thickness of the plates varies between.5-3.0mm, depending on the size of the plate. PART NO. FOR ABS-O ENCLOSURE DIMENSIONS W x H x D (in mm) PACK OMP2020 OABP20203G 60 x 60 x.5 OMP2030 OABP20303G 60 x 260 x.5 OMP2040 OABP20403G 60 x 360 x.5 Galvanised Steel OMP3030 OABP30303G 260 x 260 x.5 OMP3040 OABP30403G 260 x 360 x.5 OMP4040 OABP40403G 360 x 360 x.5 OMP3060 OABP30603G 260 x 560 x.5 OMP4060 OABP40603G 360 x 560 x.5 CABLECRAFT EXTENSION FRAME FOR ABS-O ENCLOSURES Cablecraft s premium quality extension frames for ABS-O enclosures are made from Polycarbonate. It adds 55mm in depth and includes mounting screws and gasket. PART NO. DIMENSIONS W x H x D (in mm) PACK Polycarbonate COLOUR: Grey RAL 7035 SERVICE TEMPERATURE RANGE: -40 C to +60 C IP RATING: IP66/67 OPCP202006E 200 x 200 x 55 OPCP203006E 200 x 300 x 55 OPCP204006E 200 x 400 x 55 OPCP303006E 300 x 300 x 55 OPCP304006E 300 x 400 x 55 OPCP404006E 400 x 400 x 55 OPCP306006E 300 x 600 x 55 OPCP406006E 400 x 600 x 55 CABLECRAFT MOUNTING LUGS FOR ABS-O ENCLOSURES Polyamide mounting lugs for ABS-O enclosures. Set of 4. PART NO. DESCRIPTION PACK OFL- Set of 4 Wall Mounting Lugs 262