BCT01. BCT 1100 Series 60 BRT Bus Audit & Install. Technical Documentation Pertinent to BCT Bus Series

Size: px

Start display at page:

Download "BCT01. BCT 1100 Series 60 BRT Bus Audit & Install. Technical Documentation Pertinent to BCT Bus Series"

Zoe Chase
5 years ago
Views:

Bus Series 1150-1159 Document Number BCT01-

1 ISR TRANSIT BCT01 BCT 1100 Series 60 BRT Bus Audit & stall Technical Documentation Pertinent to BCT Bus Series Document Number BCT01- IS ' BRT SERIES_AUDIT_INSTALL-R01.DOCX June 2014

2 DOCUMENT CONTROL Revision History: Date Author Version Change Reference May 2014 Greg Heath 0.0 Audit Document June 2014 David Nezry 1.0 For Comments Distribution: # Of Copies Name Reference Documents: Document BCT BRT Series bus audit May 2014.docx BCT_bus_Schematic.vsd BCT_Bus Audit_Q&A.docx BCT logic & schematics Author Greg Heath David Nezry David Nezry NABI Corporation BCT01- IS ' BRT Series_Audit_stall-R01.docx ii

3 Glossary: AFC APC AVA AVL BCT GPS GTT ISR MDT MRT OCU PAS PCM TSP VCM VLU VoIP WAN Wi-Fi WiMax Automatic Fare Collection Automated Passenger Counting Automatic Vehicle Announcement Automatic Vehicle Locator Broward County Transit Global Positioning System Global Traffic Technology tegrated Systems Research Mobile Data Terminal Mobile Radio Transmitter Operator Control Unit Passenger Advisory Sign Power Control Module Transit Signal Priority Vehicle Component Monitoring Vehicle Logic Unit Voice Over ternet Protocol Wide Area Network Data exchange using wireless radio waves Wireless communications standard providing 30/40 mbit data rates BCT01- IS ' BRT Series_Audit_stall-R01.docx iii

4 Table of Contents 1. troduction 7 2. BCT & BRT Series Bus Visual Bus Audit Equipment List Bus Present Equipment Bus Present Equipment High Level Schematic Bus Cabinet Equipment Top Tray Equipment Center Tray Equipment Bottom Tray Equipment Floor Tray Bus Equipment Driver s Cabinet Drivers Cab Tri-Band Antenna GPS, Cellular and WiFi Destination Signs (LED) Cable Cable Harness Cable Harness J Cable Harness J Other Cables Connection Points Selected Cable Lenghts 38 Appendix A 39 BCT01- IS ' BRT Series_Audit_stall-R01.docx iv

5 Table of Tables Table 1 - Bus Schematic Equipment Location... 7 Table 2 -Bus Present Equipment Configuration Table 3 - Top Tray Equipment Table 4 - Center tray equipment Table 5 - Center tray cables Table 6 - Bottom tray equipment Table 7 - Bottom tray VLU cables Table 8 - Bottom tray Wireless System Table 9 - Bottom tray PCM cables Table 10 - Driver'scab equipment Table 11 - Driver's cab cables Table 12 - Antena equipment Table 13 - Antena cables Table 14 - Destination Sign equipment Table 15 - Cable harness J Table 16 - Cable Harness J Table of Figures Figure Series Front View... 8 Figure BRT Series Side View... 9 Figure BRT Series Back View... 9 Figure 4 - High Level stalled Equipment Figure 5 - Tray Width Figure 6 - Equipment Rack View Figure 7 - Top tray view back Figure 8 - Top tray view front Figure 9 - Center tray equipment Figure 10 - Radio terminal block (odometer hookup) Figure 11 - Center tray bottom Figure 12 - Bottom tray, top equipment Figure 13 - Bottom tray, bottom equipment Figure 14 - Impact sensor Figure 15 - Driver's cab equipment Figure 16 - Destination front (head) sign and OCU controller Figure 17 - AVA driver's footswitch Figure 18 - VoIP hands free driver's footswitch Figure 19 - VoIP hands free speaker Figure 20 - Driver's control switches Figure 21 - Event switch (emergency) Figure 22 - Emergency Button BCT01- IS ' BRT Series_Audit_stall-R01.docx v

6 Figure 23 - Tri-band antenae Figure 24 - Antenae mounting depth Figure 25 - Antenae insert diameter Figure 26 Antenna connector and connector types Figure 27 - Destination sign OCU front Figure 28 - Destination sign OCU back Figure 29 - Destination OCU pigtail Figure 30 - Head sign back view Figure 31 - Cable harness J1 connectors Figure 32 - Cable harness J2 connectors Figure 33 - Selected connectors Figure 34 - Selected cable lengths BCT01- IS ' BRT Series_Audit_stall-R01.docx vi

7 BCT BRT Series Bus Audit & stall 1. troduction This document provides product and technical information from the bus audit performed on buses 1153 and The information herein is also based on the Broward BCT logic & schematics index provided by NABI (North Amercican Bus dustries) which comprises of all the schematics of the 1100 series 60 including all the CAD/AVL, PIS and Camera systems. This will serve as a preliminary deinstallation and installation documents for the BRT Bus Series (Bus Number 1150 to 1159). Table 1 - Bus Schematic Equipment Location Schematic Title Page Number Destination Signs 23 VLU sytem and sub systems 24 Camera System 31 VoIP System 23A TPS 23A AVM 23A BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 7 of 40

2. BCT 1100 60 & BRT Series Bus Visual The 1100 60 BRT series is a low floor bus from NABI with the following specifications: 60 feet length Capacity for 63 seated passengers Front

8 2. BCT & BRT Series Bus Visual The BRT series is a low floor bus from NABI with the following specifications: 60 feet length Capacity for 63 seated passengers Front passenger door of 36 wide Center passenger door of 36 wide Rear passenger door of 29 wide Figure Series Front View BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 8 of 40

9 Figure BRT Series Side View Figure BRT Series Back View BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 9 of 40

10 3. -Bus Audit Equipment List The majority of the equipment audited in the 1300 bus series resides in the following location: 1. Cabinet Equipment Rack 2. Drivers s Cab (in and around the driver s seat) 3. Front and Back Doors ternal and external speakers are installed across the bus Bus Present Equipment The bus series presently contains the following equipment: Table 2 -Bus Present Equipment Configuration Audit Date: 23-APR-2014 Garage: Ravenswood Make: NABI Model: LFW-60 Series BRT Year: 2011 System Equipment Make/Brand QTY Keep / Bus / Tray Location AVL VLU DRI600 1 Bottom tray top AVL Wireless Module DRI 1 Bottom tray bottom AVL Power Control Module DRI 1 Bottom tray bottom AVL OCU DRI Type Q 1 Overhead driver AVL Tri-band antennae DRI 1 Roof above driver VoIP VoIP module DRI Zywan 1 Center tray top VoIP VOiP power filter DRI 1 Center tray top VoIP VoIP hands free mic DRI 1 Steering column VoIP VoIP PTT footswitch Clipper 1 Driver s L near seat VoIP VoIP handset DRI 1 Driver L pillar BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 10 of 40

11 VoIP VoIP speaker DRI 1 Keep Behind driver s seat ConX J1708 Connection strip DRI 1 TBD Bottom tray, bottom ConX Cable harness J1 DRI 1 Bottom tray top. Rear of VLU ConX Cable harness J2 DRI 1 Bottom tray top. Rear of VLU PAS PAS terior LED Sign (Next Stop Sign) TVna Destination Sign (Front Head Sign) Twin Vision 1 Keep Overhead behind driver TV Smart 1 Keep Overhead driver PAS Curb Side Sign TV Smart 1 Keep terior bus. Curb side window PAS Rear Sign TV Smart 1 Keep Exterior of bus. Rear end PAS Front Sign OCU TV Smart 1 Keep Overhead driver AVA ternal Speaker NABI 8 Keep Curb and roadside overhead AVA External Speaker NABI 1 Keep Front curb side AVA PA Driver s boom MIC NABI 1 Keep Driver L pillar AVA PA Driver s foot switch (int/both/ext) NABI 1 Keep Driver L console AVA PA Switch (on/off) NABI 1 Keep Driver L console CAM Mobile View (DVR) GE 1 Keep Top tray - top CAM Microphone Mobile view 2 Keep Ceiling Front & mid bus CAM Event Switch NABI 1 Keep Drivers cab interior L side panel. CAM Impact Sensor (same a 3axis accelometer) Mobile view 1 Keep Radio box floor BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 11 of 40

12 CAM Cameras GE 8 Keep See pics throughout bus ceiling and exteriror curbside CAM Mobile Radio Transmitter Airspan 1 Keep Top tray - top CAM MRT Dual Antenae WiFi/WiMax 1 Keep Roof, curb side CAM MRT power supply Franmar 1 Keep Top tray - top TSP Vehicle Radio/GPS GTT 1 Keep Center tray -top TSP Vehicle Control Unit GTT 1 Keep Center tray -top TSP TSP Dual Antenae 1 Keep TBD varies bus to bus AFC Farebox GFI\Odessey 1 Keep Floor dirver AVM J1939 Comms Module Vansco 1 TBD Bottom tray - bottom APC APC Control unit 0 N/A APC Front Door Sensor 0 N/A APC Back Door Sensor 0 N/A RAD Voice Radio Motorola Keep Center tray - bottom I/O Heading Sensor DRI 1 Botom tray - bottom I/O GPS Speed Vehicle Speed and Reverse Signal 1 Keep I/O Odometer 1 To Connect GPS connector off J2. Pin 1 I/O Wheelchair Ramp Deploy 1 To Connect J1, I/O con 1, pin 9 I/O Bike Rack Deploy 1 To Connect TBD via NABI I/O Bus Kneel Activation 1 To Connect TBD via NABI I/O Front Door Contact 1 To Connect J1, I/O 1, pin 15 I/O Back Door Contact 1 To Connect J2, I/O 3, pin 4 BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 12 of 40

13 I/O Equipment Rack Door ISR installed sensor on equipment rack 1 To Connect I/O Stop request Draw cord 1 Keep Curb and roadside I/O Lift Request Push button 1 Keep Beneath handicap seating Equipment FW; SW Version Other formation Motorola 4550 R Currently stand alone GE Mobile View HDD GE Mobile View DVR FW 1.11, Video HD size: 1 TB UTC MV5 SW Front (Head Sign) F/W: TV OCU Head Sign Controller F/W: Penta DVR FW: 1.11; SW: ternal Speaker External Speaker VoIP Speaker UTC MV5 Impedance : 4 Ω Impedance : 8 Ω Impedance : 4 Ω VoIP Module FW: 1.15 VLU FW: 2.0 VB_295 VLU OCU FW 4.7 ternal LED Sign FW: I/O Connector : J1708, Data A&B on sign Automatic Fare Collection FW: TBD I/O Connector : J Pos. 8, - Pos. 9 of F.B. plate TV Destinatio Sign FW: 0316 I/O Connector : BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 13 of 40

14 J2, VLU on Sign controller Mobile Radio Transmitter (AirSpan) SW I/O Connector : ETH1 (WiFi input) ETH4 (Wimax input) TPS GTT FW: 2.63 I/O Connector : VoIP Speaker I/O Connector : [Speaker Out] VoIP module Heading Sensor Odometer I/O Connector : Gyro DB9M from VLU I/O Connector : GPS Tyco (AMP) Axis Impact sensor I/O Connector : DB9 Seriel 3 of Mobil View Wheelchair Ramp Deploy I/O Connector : I/O CON 1, pin 9 Tyco (Amp) Bike Rack Deploy Bus Kneel Activation I/O Connector : Not connected I/O Connector : Not connected Front Door Contact I/O Connector : I/O Con 1, pin 15 Tyco (Amp) Back Door Contact I/O Connector : I/O Con 3, pin 5 Tyco (Amp) Equipment Rack Door Stop Request ISR installed sensor on equipment rack Triggers voice announcement and message display, I/O Con 1, pin 11 Tyco (Amp) Lift Request Triggers voice announcement and message display, I/O Con 1, pin 9 Tyco (Amp) Please note Appendix A contains a blank bus audit sheet for future reference and use. BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 14 of 40

3.2 -Bus Present Equipment High Level Schematic Figure 4 - High Level stalled Equipment As per the figure above the following equipment and their connecting cables must be removed : 1. Hardware 1.

15 3.2 -Bus Present Equipment High Level Schematic Figure 4 - High Level stalled Equipment As per the figure above the following equipment and their connecting cables must be removed : 1. Hardware 1. DR Type Q OCU 3. PCM (power control unit) 4. Wireless module 5. VoIP system 6. Antena 1 2. Cables 1. Cable Harness J1 2. Cable Harness J2 3. Cables in/out of VLU 4. Cables in/out of PCM (power control unit) 5. Cables in/out of VoIP Syste BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 15 of 40

four trays used to install in-bus 3 rd party equipment as follows: 1. Top tray; 2. Center tray; 3. Bottom tray; and 4. Floor tray.

16 4. -Bus Cabinet 6. Cables in/out of Antenna The BRT series low floor bus from NABI (North Amercican Bus dustries) has cabinet behind the driver seat consisting of four trays used to install in-bus 3 rd party equipment as follows: 1. Top tray; 2. Center tray; 3. Bottom tray; and 4. Floor tray. Each tray has a top and bottom equipment placement. Tray size are 14.5 x 20. Figure 5 - Tray Width CAD/AVL, Communication and Power equipment will be removed from these trays and replaced with ISR Transit equipment. Figure 6 - Equipment Rack View BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 16 of 40

None Table 3 - Top Tray Equipment System Product Description Keep / Camera System (CS) Mobile View GE Keep Mobile Radio

17 4.1 Equipment Top Tray The top tray has the following equipment installed: 1. Top a. GE MobileView DVR and CPU system b. MRT WiMax / WiFi radio. 2. Bottom a. None Table 3 - Top Tray Equipment System Product Description Keep / Camera System (CS) Mobile View GE Keep Mobile Radio Transmitter MRT WiMAx Radio Keep Do not remove any cable from this tray. Figure 7 - Top tray view back Figure 8 - Top tray view front BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 17 of 40

18 4.2 Equipment Center Tray The middle tray has the following equipment installed: 1. Top a. GTT TSP b. VoIP ZyWAN c. VoIP power filter d. Bus bar : BATT, GND, IGN, ODOMETER 2. Bottom a Radio Table 4 - Center tray equipment System Product Description Keep / VoIP System VOIP Module TPS System GTT Vehicle Radio/GPS Unit Keep TPS System GTT Vehicle Control Unit Keep 4550 Radio Motorolla Vehicle Commo Radio Keep Cable Port Product Description Table 5 - Center tray cables Port Name Connector Type Keep / Out Hand free VoIP mic Port XX Hand free Hand free microphone microphone Out VoIP Footswitch Port XX Foot switch Foot switch Out VoIP Handset Port XX Handset Handset Out VoIP Speaker Port XX Speaker Speaker Out VoIP Power Port XX PCM PCM AUX 5A Molex (?) Out Serial VoIP Control 2/3 DB9F Ports VLU VLU 1B/1D DB9M Out GPRS VoIP Antennae Cell Coax (?) GPRS Tri-Band Antenna ANT Antennae e Coax (?) BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 18 of 40

19 Figure 9 - Center tray equipment Figure 10 - Radio terminal block (odometer hookup) Figure 11 - Center tray bottom 4.3 Equipment Bottom Tray BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 19 of 40

20 The bottom tray has the following equipment installed: 1. Top a. VLU DR Bottom a. DRI WLAN b. Engine Communication Module (AVM) c. DRI PCM d. Heading Sensor Table 6 - Bottom tray equipment System Product Description Keep / AVL System (AVL) VLU DR600 AVL System (AVL) Wireless Module DRI WLAN AVL System (AVL) Power Control Module (PCM) PCM AVL System (AVL) Heading Sensor AVM System J1939 Comms Module Power TBD Table 7 - Bottom tray VLU cables Cable Port Product Description Port Name Out Out Out Out J1 Cable VLU assembly Cable Harness J1 I/O Conn 1 J1 Cable assembly Port J1 Connection Strip P56 VLU Port J1 Cable Connection Strip Harness J1 Drivers MIC P60 J1 Cable VLU assembly Port J1 Cable Harness J1 I/O Conn 2 PCM J1 Cable VLU assembly Port J1 Cable Harness J1 Power PCM Connector Type Tyco (Amp) Tyco (Amp) Tyco (Amp) Tyco (AMP) Tyco (Amp) Tyco (AMP) Tyco (Amp) Tyco (AMP) Keep / BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 20 of 40

21 Out Out Out Out Out VLU J2 Cable assembly Port J2 Tyco (Amp) Cable Tyco (Amp) Harness J2 I/O Conn 3 EA Switch J2 Cable Tyco (Amp) VLU assembly Port J Cable J1708 Connection Harness J2 Ports 2A/2B Strip DB9F J2 Cable Tyco (Amp) VLU assembly Port J Cable Harness J2 Ports 1B/1D VOIP System DB9M J2 Cable Tyco (Amp) VLU assembly Port J Cable Harness J2 Ports 1C VLU OCU DB9M VLU J2 Cable assembly Port J2 Cable Harness J2 Ports 1A AVM DB9M Tyco (Amp) Out J2 Cable Tyco (Amp) VLU assembly Port J Cable Harness J2 Gyro Heading Sensor DB9M Out J2 Cable Tyco (Amp) VLU assembly Port J Cable Connection Strip Tyco (AMP) Harness J2 GPS J Out VLU Network Network RJ-45 WS Network Network RJ-45 Out VLU Antenae GPS ANT Coax ANT Antenae GPS Coax Out Connection Connection Strip Tyco (Amp) I/O Conn 1 Strip P56 P Keep Connection ternal ternal speaker 1- Tyco (Amp) Strip P56 Speaker Keep Out Connection Connection Strip Tyco (Amp) I/O Conn 1 Strip P56 P Keep Connection Strip P56 External Speaker External speaker 1 Tyco (Amp) Keep BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 21 of 40

22 Table 8 - Bottom tray Wireless System Cable Port Product Description Port Name Connector Type Keep / Out WS Network Network RJ-45 VLU Network Network RJ-45 Out WS Antenae WLAN Coax ANT Antenae WLAN Coax Out Tyco AMP 3 WS Power Power pin?? Tyco (AMP) PCM Power WLAN Table 9 - Bottom tray PCM cables Cable Port Product Description Port Name Connector Type Tyco AMP 3 pin?? Tyco (AMP) Keep / Out PCM PCM PWR Cable J1 Cable Harness J1 assembly I/O Conn Out PCM PCM Port XX Molex (?) Cable J1 Cable Tyco AMP 3 Harness J1 assembly Power pin??? Out PCM PCM Port XX Molex (?) Connection Connection Strip P58 Strip P58 Molex (?) Out PCM PCM WLAN 5A Molex (?) AVM J1939 Power Out PCM PCM WLAN 5A Molex (?) APC Out PCM PCM WLAN 5A Molex (?) WS Power WLAN Molex (?) Out PCM PCM AUX 5A Molex (?) VLU OCU Power Power Molex (?) Out PCM PCM AUX 5A Molex (?) VoIP Power Power Molex (?) BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 22 of 40

23 Figure 12 - Bottom tray, top equipment Figure 13 - Bottom tray, bottom equipment BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 23 of 40

24 4.4 Equipment Floor Tray The Floor tray has the following equipment installed: 1. Impact Sensor Figure 14 - Impact sensor Do not remove BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 24 of 40

25 5. -Bus Equipment Driver s Cabinet 5.1 Drivers Cab The driver s cab has the following equipment installed: 1. VLU OCU 2. VoIP a. VoIP hands free foot switch b. VoIP hands free speaker 3. Radio Handset 4. Passenger formation System a. Destination Sign OCU b. ternal / External Speaker Driver s boom MIC c. ternal / External Speaker Driver s foot switch 5. Driver s control switches 6. Event Switch (emergency alarm) Table 10 - Driver'scab equipment System Product Description Keep / AVL System (AVL) VLU OCU OCU Destination Sign (DS) DS OCU OCU Keep Voice Radio Handset Keep AVL System (AVL) Driver`s boom MIC MIC Keep AVL System (AVL) Driver`s foot switch Foot Switch Keep VOIP System Speaker VOIP System Footswitch Camera System (CS) Event Switch Emergency Switch Keep Cable Port Product 1 2 Descripti on Table 11 - Driver's cab cables Port Name Connector Type Keep / Out VLU OCU OCU Port XX Coax (?) Cable J2 Cable Harness J2 assembly Ports 1C DB9F Out VLU OCU OCU Port XX Coax (?) PCM Power OCU Tyco AMP BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 25 of 40

26 Figure 15 - Driver's cab equipment Figure 16 - Destination front (head) sign and OCU controller BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 26 of 40

Next Stop manual announcment Figure 19 -

27 Figure 18 - VoIP hands free driver's footswitch Figure 17 - AVA driver's footswitch Pertinant Switches: C: PA On/Off, E: Driver s PA Speaker Select H: Next Stop manual announcment Figure 19 - VoIP hands free speaker Figure 20 - Driver's control switches BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 27 of 40

28 Figure 22 - Emergency Button Figure 21 - Event switch (emergency) BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 28 of 40

29 5.2 Tri-Band Antenna GPS, Cellular and WiFi The antennae location has the following equipment installed: 1. Tri-band antennae a. GPS b. GPRS c. WLAN Table 12 - Antena equipment System Product Description AVL System (AVL) Tri-Band Antennae GPS/WLAN/GPRS Antennae Keep / Table 13 - Antena cables Cable Port Product Description Port Name Connector Type Keep / Out ANT GPS Antennae GPS Coax VLU GPS Antennae GPS ANT Coax Out ANT GPRS Antennae GPRS Coax VoIP GPRS Antennae GPRS Coax Out ANT WLAN Antennae WLAN Coax WS WLAN Antennae WLAN antenna Coax Figure 23 - Tri-band antenae BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 29 of 40

30 Figure 24 - Antenae mounting depth Mounting depth < ½ inch recommended Figure 25 - Antenae insert diameter Ant insert diameter ¾ inch BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 30 of 40

31 GPRS 800/2700 MHz GPRS 800/2700 MHz connector GPS 3V/5V GPS 3V/5V connector WLAN 2.4 GHz WLAN 2.4 GHz connector Figure 26 Antenna connector and connector types BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 31 of 40

Destination sign OCU Table 14 - Destination Sign equipment System Product Description Keep / Destination Sign (DS) Front Sign Front Sign Keep

32 5.3 Destination Signs (LED) The destination sign system has the following equipment installed: 1. Destination Sign a. Front (head) sign b. Curb side sign c. Rear Sign d. Destination sign OCU Table 14 - Destination Sign equipment System Product Description Keep / Destination Sign (DS) Front Sign Front Sign Keep Destination Sign (DS) DS OCU OCU Keep Destination Sign (DS) Curb Side Sign Curb Side Sign Keep Destination Sign (DS) Rear Sign Rear Sign Keep Figure 27 - Destination sign OCU front Figure 28 - Destination sign OCU back BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 32 of 40

33 Figure 29 - Destination OCU pigtail Sign controller pigtail to harness. 2 foot Figure 30 - Head sign back view. BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 33 of 40

1 Cable Harness J1 Table 15 - Cable harness J1 Product Description Port Name

480710-0 Cable Harness J1 Connection Tyco (AMP) 1- Drivers MIC Strip P60 480702-0

Power PCM 480701-0 Cable Harness J1 Line Out N/C Cable Harness J1 I/O CON1 Cable

34 6. Cable 6.1 Cable Harness Following are cable harnesses components and connectors Cable Harness J1 Table 15 - Cable harness J1 Product Description Port Name Connector Type Keep / Cable Harness J1 Connection Tyco (Amp) 1- I/O Conn 1 Strip P Cable Harness J1 Connection Tyco (AMP) 1- Drivers MIC Strip P Cable Harness J1 Tyco (AMP) 1- I/O Conn 2 PCM Cable Harness J1 Tyco (AMP) 1- Power PCM Cable Harness J1 Line Out N/C Cable Harness J1 I/O CON1 Cable Harness J1 I/O CON2 Cable Harness J1 Line out audio Cable Harness J1 Drivers mic Figure 31 - Cable harness J1 connectors BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 34 of 40

35 6.1.2 Cable Harness J2 Table 16 - Cable Harness J2 Product Description Port Name Connector Type Cable Harness J2 I/O Conn 3 EA Switch J1708 Cable Connection Harness J2 Ports 2A/2B Strip Cable Tyco (Amp) DB9F Keep / Harness J2 Ports 1B/1D VOIP System DB9M Cable Harness J2 Ports 1C VLU OCU DB9M Cable Harness J2 Ports 1A AVM DB9M Cable Heading Harness J2 Gyro Sensor DB9M Cable Connection Tyco (AMP) 1- Harness J2 GPS Strip J Cable Harness J2 Ports 2C/2D N/C BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 35 of 40

36 Cable Harness J2 1A 1C Cable Harness J2 1B 1D Cable Harness J2 2A 2B Cable Harness J2 2C 2D Cable Harness J2 I/O CON3 Cable Harness J2 GPS (Reverse / Odometer sig) Cable Harness J2 Gyro Heading sensor Figure 32 - Cable harness J2 connectors BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 36 of 40

37 6.1.3 Other Cables Connection Points PCM Pwr/GND/Ign J1939 interface T interface: uninterrupted communication J1939 location Bick rack sensor Mating connector of current OCU Figure 33 - Selected connectors BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 37 of 40

38 6.2 Selected Cable Lenghts Following are cable lengths between different location and equipments. SPM to Rear of radio box: 32 + slack (Lπ/2) = 50 Lateral Radio box: 42 Radio box to Front of cab: 72 ternal wall to OCU: 24 OUC to upper cover 12 + slack: (Lπ/2) = 19 Figure 34 - Selected cable lengths BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 38 of 40

39 Appendix A Audit Date: Make: Series Garage: Model: Year: System Equipment Make/Brand QTY Keep / Bus / Tray Location BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 39 of 40

40 Equipment FW; SW Version Other formation BCT01- IS ' BRT Series_Audit_stall-R01.docx Page 40 of 40

Fixed-Route Bus Operator Training. Broward County Transit CAD/AVL APIS Project September 2014

Fixed-Route Bus Operator Training Broward County Transit CAD/AVL APIS Project September 2014 CAD/AVL APIS PROJECT BCT OVERALL ARCHITECTURE BCT CAD/AVL APIS Architecture 3 BCT CAD/AVL APIS Architecture