User s Manual / 使用手冊 Model : TIP-M200ST-BK

Size: px

Start display at page:

Download "User s Manual / 使用手冊 Model : TIP-M200ST-BK"

Beatrix Jacobs
5 years ago
Views:

2 01 PACKAGE INCLUDES...2 FEATURE / SPECIFICATIONS...3 SYSTEM REQUIREMENTS...4 PARTS LAYOUT...5 INTRODUCTION...7 INSTALLING A HARD DRIVE...8 WARRANTY / CONTACT...9 目錄包裝內附...10 產品特色 / 產品規格...11 系統需求...12 裝置介面...13 安裝步驟...14 使用說明...16 授權 / 保證書...17

3 SATA SATA 02 Model : TIP-M200ST-BK User s Manual / 使用手冊 All Registered Trademarks Belong To Their Respective Companies Copyright 2010 MUKii Technology INC. All Rights Reserved. Please check your packing list to be sure all parts are recieved TransImp MD Removable Dual 2.5" Hard Drive Rack x 1 SATA Cable x 2 4 PIN to SATA Power Cable x 1 User s Manual x 1 Screw Pack x 1

4 03 Easy Insertion and Removal of Hard Drive Without any Tool or Mounting Screws. Two Drive Slots to Accommodate up to Two 2.5" SATA I/II hard Drives or SSD Drives. Support for Hot Swap and Plug n' Play with up to 3Gb/s Transfer Rate. LEDs for Power and Drive Activity. Seamless Integration in any Standard 3.5 Drive Bay. Aluminum Enclosure Design to Help with heat Dissipation. High Quality Sleek Brushed Finish. Model : TIP-M200ST-BK Device support : SATA I/II HDD x 2 or SATA SSD x 2 Device size : 2.5 Internal interface : Serial ATA Material : Aluminum / Plastic Dimension : 152 x x 25.4 mm Power : SATA power For the most current storage capacity & Operating System Support, please check our website : 4-PIN to SATA Power Cable or SATA Power Cable POWER SATA 1 SATA 2 SATA Cable SATA Cable

5 04 Intel Pentium II 350 MHz-compatible. Microsoft Windows 2000/XP/VISTA/7. Mac G3 processor & greater. MAC OS 8.6 & greater. 1. SATA-equipped system. 2. For SATA speeds, the system must support SATA specifications. 1. SATA-equipped system. 2. For SATA speeds, the system must support SATA specifications.

6 05 LED indicator Front panel door Screw hole Locking button POWER SATA 1 SATA 2 SATA power connector SATA data connector

7 06 1. Turn off the power of the computer and take off the power cable of computer. (Figure A) (Figure A) 2. Dismantle the left & right side of PC covers. (Figure B) (Figure B) 3. Dismantle the 3.5 HDD rack panel. (Figure C) (Figure C) 4. Insert TransImp MD to the 5.25 bay of the computer. (Figure D) (Figure D)

8 07 5. Tighten TransImp MD with the screws. (Figure E) (Figure E) 6. Plug one side of SATA cable to the SATA port of the motherboard, the other side is plugged to the SATA port of TransImp MD. (Figure F) (SATA Cable) (Figure F) 7. Connect the SATA power cable or the 4-pin Molex to SATA Adapter include in the package to TransImp MD sata power connector (Figure G) POWER SATA 1 SATA 2 (SATA Power Cable) (Figure G) 8. Assemble the front cover of PC ; assemble the left & right side of PC cover ; connect the power cable of computer. (Figure H) (Figure H)

9 08 1. Open the front panel door by gently sliding the locking button from right to left (Figure A) (Figure A) 2. Insert 2.5 SATA HDD(s) or SSD(s) (Figure B) (Figure B) 3. Close the front panel door (Figure C) (Figure C) 4. Press the front panel door to eject the drive (Stabilize the Hdd with your hand) (Figure D) (Figure D)

10 WARNING : The TransImp comes with a One (1) year Limited Warranty (90-day on defective parts). Should your product become defective within the specified time frame, please visit to receive instructions for obtaining repair or warranty exchange. Cosmetic defects and missing parts are not covered by this warranty. Please check to make sure all parts are included & no visible flaws. If a replacement is required for any cosmetic defects or missing parts, please contact the retailer from whom you purchased the Product immediately. MUKii Technology INC. 2F,No.588,Tanmei St,Neihu District,Taipei City114,Taiwan(R.O.C) Tel: Fax: cs@mukii.com.tw Copyright 2010 MUKii Technology INC. All Rights Reserved. All Registered Trademarks Belong To Their Respective Companies 09

11 SATA SATA 10 Model : TIP-M200ST-BK User s Manual / 使用手冊 All Registered Trademarks Belong To Their Respective Companies Copyright 2010 MUKii Technology INC. All Rights Reserved. 包裝內附請先檢查產品內附是否齊全勁速 -MD 2.5 吋 SATA 介面雙槽硬碟抽取盒 x 1 SATA 傳輸線 x 2 4-PIN to SATA 電源轉接線 x 1 使用說明書 x 1 螺絲 x 1

12 11 產品特色簡易安裝設計, 不需使用工具即可拆裝硬碟, 使用最便利獨特硬碟退出機構, 輕易移除硬碟裝置不費力可同時安裝兩顆 2.5 吋 SATA 硬碟 /SATA SSD 固態硬碟 ( 支援 SATA II 向下相容 SATA I 硬碟 ) 支援熱插拔, 隨插即用, 最高支援 3Gb/s 傳輸速度 LED 硬碟讀取 / 電源指示燈, 可有效偵測硬碟讀取動作適用於 3.5 吋擴充槽鋁合金機體搭配後方導風孔設計可有效降低硬碟溫度高質感黑色髮絲處理產品規格產品型號 :TIP-M200ST-BK 支援裝置 :SATA I/II 硬碟 x2 或 SSD 固態硬碟 x2 裝置規格 : 2.5 吋內部連接介面 :Serial ATA 外觀材質 : 鋁合金 / 塑膠本體尺寸 :152 x x 25.4 mm 電源 :SATA 電源接頭 * 最新硬碟容量與作業系統支援請上萌科技網站查詢 : 4-PIN to SATA 電源轉接線或 SATA 電源線 POWER SATA 1 SATA 2 SATA 傳輸線 SATA 傳輸線

13 系統需求 Intel Pentium II 350 MHz-compatible 或 Microsoft Windows 2000/XP/VISTA/7 Mac G3 processor 含以上 MAC OS 8.6 含以上 1. 硬體配備支援 SATA 介面 2. SATA 傳輸速度, 須配合硬體系統支援 1. 硬體配備支援 SATA 及 USB 介面 2. SATA 傳輸速度, 須配合硬體系統支援 12

14 13 裝置介面 LED 指示燈前檔板螺絲孔前檔板開關 POWER SATA 1 SATA 2 SATA 電源接頭 SATA 傳輸接頭

15 安裝步驟 1. 關閉電腦電源, 並卸下電腦的電源線 ( 如圖 A) ( 如圖 A) 2. 將電腦的左右側板拆下 ( 如圖 B) ( 如圖 B) 3. 將電腦的 3.5 吋前面板拆下 ( 如圖 C) ( 如圖 C) 4. 把 " 勁速 -MD 2.5 吋 SATA 介面雙槽硬碟抽取盒 " 置入電腦 3.5 吋槽內 ( 如圖 D) ( 如圖 D) 14

16 安裝步驟 5. 將左右二側的螺絲鎖上 ( 如圖 E) ( 如圖 E) 6. 把 SATA 線一側接上主機板 SATA 槽, 另一端接在 " 勁速 -MD 2.5 吋 SATA 介面雙槽硬碟抽取盒 " 的 SATA 埠 ( 如圖 F) (SATA 接頭 ) ( 如圖 F) 7. 將電源供應器的 SATA 電源線或是隨附的 4-PIN to SATA 電源轉接線接到 " 勁速 -MD 2.5 吋 SATA 介面雙槽硬碟抽取盒 " 的 SATA 電源接頭 ( 如圖 G) POWER SATA 1 SATA 2 (SATA 電源接頭 ) ( 如圖 G) 8. 將電腦左右側板裝上並接回電腦電源線 ( 如圖 H) ( 如圖 H) 15

17 16 使用說明 1. 將開關從右向左輕推打開前檔板 ( 如圖 A) ( 如圖 A) 2. 安裝 2.5 吋 SATA 硬碟 ( 如圖 B) ( 如圖 B) 3. 關閉前檔板 ( 如圖 C) ( 如圖 C) 4. 將前檔板向前推退出硬碟 ( 請輕扶硬碟以免掉落 ) ( 如圖 D) ( 如圖 D)

18 授權 / 保證書持有人姓名 : 產品編號收件日期萌銓科技實業股份有限公司 ( 維修記錄表 ) 電話 :( 行動 ) ;( 室內 ) 地址 : 縣鄉村路市鎮里街段巷弄號樓無法修復原因 : 持有人自行填寫萌銓科技實業股份有限公司 ( 產品保固卡 ) 產品名稱 : 勁速 -MD 2.5 吋 SATA 介面雙槽硬碟抽取盒購買日期 : 年月日產品型號 : TIP-M200ST-BK * 商品憑保固卡享有自購買日起一年內之保固服務 * 保固卡如有遺失, 恕不補發請妥善保管 * 產品在保固期間如有下列情況亦得酌收費用, 敬請見諒 1) 因人員未按使用手冊上之規定及注意事項而造成損壞 2) 天災地變或電壓異常造成損壞 3) 未能出示保固卡或相關購買證明 4) 保固卡經塗改或難以辨識 * 產品在保固期間如需維修服務時, 請提出保固卡或相關購買證明 1 2 維修專員費用是否修復收件日期維修專員費用是否修復是是否否無法修復原因 : ( 需蓋經銷商章. 保固方有效, 此保固卡只限於台灣地區使用 ) 維修專員填寫 ( 製造商 ) ( 蓋經銷商章 ) 客服相關訊息服務時間 : 週一到週五 09:00~12:00 及 14:00~1800( 假日除外 ) 專線 :(02) ; 傳真 :(02) 電郵 :cs@mukii.com.tw ; 住址 : 台北市內湖區潭美街號 2 樓 ( 需蓋經銷商章. 保固方有效, 此保固卡只限於台灣地區使用 ) Copyright 2010 MUKii Technology INC. All Rights Reserved. All Registered Trademarks Belong To Their Respective Companies 17

Quick Installation Guide

WiPG-1500 Quick Installation Guide Version: 9.0 Date: Jul 11, 2013 1 1. Package Contents WiPG-1500 device Plug&Show USB token Power Adapter (DC +5V, 2.5A) Wi-Fi Antenna x 2 Wall-mount Kit (screw x4, bracket