Gigabyte and Giga-byte are trademarks of Giga-byte Technology Co., Ltd. Microsoft and Windows XP are trademarks of Microsoft Corporation.

Size: px

Start display at page:

Download "Gigabyte and Giga-byte are trademarks of Giga-byte Technology Co., Ltd. Microsoft and Windows XP are trademarks of Microsoft Corporation."

Curtis Walker
5 years ago
Views:

1 Copyright Feb, 2006 This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of Giga-byte Technology Co., Ltd. The information in this document is subject to change without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes. Trademark Recognition Gigabyte and Giga-byte are trademarks of Giga-byte Technology Co., Ltd. Microsoft and Windows XP are trademarks of Microsoft Corporation. All other product names used in this manual are the properties of their respective owners and are acknowledged.

2 FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the parties responsible for compliance could void the user s authority to operate the equipment. Important Safety Information We recommend that you read this section carefully before using the H663 / H663-RH. These safety and usage instructions will ensure that you enjoy many years safe use of the H663 / H663-RH. Keep this manual for future reference. Warning Symbols on the H663 / H663-RH Case Be sure to read the power rating label on the bottom of the H663 / H663-RH before operation. RATING LABEL Caution: Before connecting power to the H663 / H663-RH, make sure the power source is within the range of AC 100~240V, 50~60 Hz. Do not attempt to service the H663 / H663-RH yourself. If the unit gets wet or you think it is damaged, have the unit serviced. Do not open the unit case for any reason. I

3 General Safety Information Do not place heavy objects such as books or bags on the unit. Avoid placing objects with strong magnets built in too close to the unit. If you suspect stereo speakers may interfere with the unit, try moving the speakers away from the unit. Avoid using the system in direct sunlight, or near a heating device. To prevent the unit from overheating, do not cover the air ventilation openings on the top, sides, or the rear. Do not open the unit case. Do not attempt to service the H663 / H663-RH yourself. For servicing, contact qualified service personnel. Do not place the unit on an unstable surface, cart, or stand. Avoid exposing the H663 / H663-RH to moisture or excessive humidity. Follow all warnings and cautions in this manual and on the unit case. II

4 Power Safety Only use the supplied power cord. Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic. Remove the batteries from the remote control when storing or not in use for a prolonged period. Before connecting power to the H663 / H663-RH, make sure the power source is within the range of AC 100~240V, 50~60 Hz. HDD Partition: It is strongly recommend not to partitioning the hard disk. Manual Styles The following styles are used in this manual to alert you to important information. Note Style Provides additional information on the topic at hand. Provides information that should not be overlooked. Alerts you to situations that may damage the unit or cause personal injury. Provides helpful information on the topic at hand. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. III

5 CONTENTS Chapter One Getting Started 1.1 Packing Checklist Features at a Glance... 2 Front View... 2 Rear View VFD (Vacuum Fluorescent Display) Message Remote Control Functions Inserting the Remote Control Batteries Keyboard Functions... 9 Using the Trackball and Buttons Shortcut Buttons Inserting the Keyboard Batteries Set Up for Keyboard Linkage Remote Control and Kayboard Operating Range Chapter Two Connecting Input Devices 2.1 Basic Connections for the H663 / H663-RH...12 Chapter Three Maintenance 3.1 Cleaning the H663 / H663-RH Troubleshooting...13 Appendix A Specifications...15 IV

Getting Started Packing Checklist Carefully unpack the H663 / H663-RH and check that besides this User Manual the following items are included: H663 / H663-RH Recovery CD (Option) Utility Driver CD

6 Getting Started Packing Checklist Carefully unpack the H663 / H663-RH and check that besides this User Manual the following items are included: H663 / H663-RH Recovery CD (Option) Utility Driver CD Adapter RF Keyboard (Option) Remote Control (Option) 3.5 RCA Cable IR Cable for Set Top Box (Option) 3.5 x 2 Audio Cable Two AA for RF keyboard & two AA for remote controller (MCE) (Option) S Cable (RCA Cable) (4 pin) Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. 1

7 Features at a Glance Front View Item 1. Power Button Description Press the power button to turn the H663 / H663-RH on. Press the pwer button again to set H663 / H663-RH in Suspend mode. Press and hold the power button few seconds to turn the H663 / H663-RH off. 2. IEEE 1394 (4-pin) Connects IEEE 1394-enabled devices. 3. USB 2.0 Port(s) Two USB ports allows user to connect USB devices such as external game pads, pointing devices, and keyboard. 4. RF Receiver Switch RF Keyboard learning button. 5. LED Indicator RF Keyboard LED status indicator. 6. IR Window Interfaces with infrared devices ( for MCE RC only). 7. Menu / Exit Button Invoke main menu or exit current screen. 8. Arrow Buttons Navigated in the menu. 9. Enter Button Confirm selected items. 10. Return Button Backward to the previous screen. 11. VFD VFD (Vacuum Fluorescent Display). See page 4 for more detailed information. 12. Card Reader 6-in-1 card reader. 13. DVD Super Multi DVD-Multi Recoder. 14. DVD Eject Push to enject a disc from the DVD drive. 2

8 Rear View IR BLASTER Item Description 1. Power Jack Connects the power cord DC Jack here. 2. MIC-In Accepts microphone line-in devices 3. Line-Out 4. Line-In Connects to audio line-out devices (e.g., speakers, headphones, an amplifier). Accepts audio line-in devices (e.g., audio CD players). 5. S/PDIF decoder Digital audio output connector. 6. VGA Port (15-pin) 7. USB 2.0 Port(s) Connects to a display device (e.g., external monitor, LCD projector). Two USB ports allows user to connect USB devices such as external game pads, pointing devices, and keyboard. 8. IEEE 1394 Port (6-pin) Connects to IEEE 1394 devices. 9. Network Jack Connects to an Ethernet 10/100/1000-based network. *10. S-Video Port S-Video input. *11. CATV Cable-TV input. 12. Video Out Connector for video output. 13. DVI-I Port Connects to digital monitor. 14. IR Blaster(s) (Option) * The position of port may be varied by models. This IR blaster can be taught the remote control codes for any set-top box and provides control of a wide range of other PC applications. 3

9 VFD (Vacuum Fluorescent Display) Message The LED display on the front of the H663 / H663-RH displays status information. As well as disc information, the following messages display in the LED display: Item Description 1. Volume Level Displays the volume level. 2. Volume Level Displays the volume level. 3. Mode Displays the current mode. 4. Status Bar Display time information, media play time, and mode status. 4

10 Normal Windows Mode (Media Center Applications are not run) / Sleep Mode Status: 1. The system is turn on in normal Windows mode. Media Center applications are not run. 2. System is sleeping. Description: 1. Time is shown. The clock control by VFD MCU. 2. Volumes of audio in left and right are shown. 3. Run Disk is stop. Start to run Media Center Applications / On Meida Center Home Frame Status: 1. Press Start button to run Media Center applications and the system is in Media Center Home frame. 2. User can use and to choose the wanted multimedia in MCE. Description: 1. No display information shown. 2. Run Disk is stop. My Video Mode Status: When My Videos is selected, the screen is on video frame and stop mode. Description: 1. VIDEO is shown 2. Run Disk is stop till the media is played. 5

11 My Picture Mode Status: On My Pictures frame and stop mode. Description: 1. PICTURE is shown. 2. Run Disk is stop. * Run Disk can be rotating when the previous selected media is keep playing. My Music Mode Status: On My Music frame and stop mode. Description: 1. MUSIC is shown. 2. Run Disk is stop till the media is played. TV Mode Status:On My TV frame and stop mode. Description: 1. TV is shown. 2. Run Disk is stop till the media is played. 6

12 Status: On TV frame and go to live TV. Description: 1. It will show the channel number once press the button of CH_PG. 2. Run Disk is running. Status: On TV frame and go to record TV. Description: 1. REC SHOW is shown. Music / DVD / Video / Play Mode Status: On music, DVD, video frame and play mode. Description: 1. When playing the music, it will show the track time on Music frame or Home frame. 2. Run Disk is running. 3. If you go to My Pictures on picture frame, then PICTURE is shown on the display. CD Burning Progress Status: CD burning progress. Description: 1. When the dot-block is full, means the CD burring progress is complete. 2. This example shown is 100% in the last 2 dot-block. 7

13 Remote Control Functions O ST RD Function Power on/off OP PA Stop US E RE C Item Recording Button REW FWD REPLAY Play SKIP BACK Pause MORE Fast Rewind Fast Forward START Previous Track CH PG VOL Next Track MUTE RECORDED TV GUIDE LIVE TV Back DVD MENU More Information Direction Keys: Up/ Down Enter Key: OK Direction Keys: Left/ Right CLEAR ENTER Next Channel (TV) Previous Channel (TV) START Menu Mute VOL Volume Up VOL Volume Down 8

14 Inserting the Remote Control Batteries The battery compartment is on the underside of the remote control. Remove the batteries when not using the H663 / H663-RH for a longer period. 1. Pull the latch upward and open the battery compartment cover. 2. Insert 2 AA batteries taking note of the correct polarity (+/-). 3. Close the cover. 1. Only use AA batteries. 2. Dispose of used batteries according to local ordinance regulations. 3. Remove the batteries when not using the H663 / H663-RH for prolonged periods. Keyboard Functions Left Button Right Button Shortcut Buttons Trackball 9

15 Using the Trackball and Buttons The trackball and buttons have the same functions as a PC mouse. Roll the trackball to move the cursor on the screen, use the left and right buttons as you do a standard mouse. Shortcut Buttons In addition to the normal keys found on standard keyboards, the H663 / H663-RH keyboard features a number of shortcut buttons, whose functions are outlined below. Button Power AV PC IE Function Power button. MCE/PCM start up. Back to PC screen. Internet. Shortcut button to your manager. Inserting the Keyboard Batteries The battery compartment is on the underside of the keyboard. Remove the batteries when not using the H663 / H663-RH for a longer period. 1. Lift as shown to remove the cover. 2. Insert two AA batteries taking note of the correct polarity (+/-). 3. Replace the cover. 1. Only use AA batteries. 2. Dispose of used batteries according to local ordinance regulations. 3. Remove the batteries when not using the H663 / H663-RH for prolonged periods. 10

16 Set Up for Keyboard Linkage 1. Remove the cover and check if the batteries have been installed. (You can follow instructions on P.10 Inserting the Keyboard Batteries). 2. Press connect button on the front panel. After pressing the button, its indicator will light (slowly) and waiting for the match signal from RF Keyboard. LED is bricking slowly Press this button 3. Then press this learning button on RF Keyboard to let receiver recognize signal. As soon as the linkage is completed, the indicator turns to quick flash. Press this button Remote Control and Keyboard Operating Range The remote control uses infrared transmission to control the H663 / H663-RH. It is necessary to point the remote directly at the H663 / H663-RH. Provided you are facing the H663 / H663-RH, the remote will function well within a radius of about 3 meters (10 feet) and 30 degrees above or below the H663 / H663-RH level. If the H663 / H663-RH does not respond to the remote control, move a little closer or replace the batteries. The keyboard uses RF to control the H663 / H663-RH. It is not necessary to point the keyboard directly at the H663 / H663-RH. Provided you are facing the H663 / H663-RH, the keyboard will function well within a radius of about 10 meters without interference. If the H663 / H663-RH does not respond to the remote control, move a little closer or replace the batteries. 11

17 Connecting Input Devices Basic Connections for the H663 / H663-RHs Many of the connectors on the H663 / H663-RH support the connection of more than one kind of device. For example, USB printers, keyboards, or scanners can be connected to any of the USB ports Compliant Device USB Compliant Device Memory Cards (MMC/SM/SD/MS/CF/MD) Microphone Amplifier / Speakers or Headphone CD Player TV DVI-I IR Emitter 1 2 IR BLASTER S/PDIF decoder RGB Port 1394 Compliant Device ADSL Modern or Router Antenna USB Compliant Device DVD Player / Set Top Box In 12

18 Maintenance Cleaning the H663 / H663-RH Refer to the following to clean the H663 / H663-RH case. 1. Wipe off dust with a clean dampened cloth. 2. Moisten the cloth with warm water and wring the cloth out well, then wipe the case. Warning: 1. Be sure to turn off and unplug the H663 / H663-RH at least an hour before clean-ing. 2. If a little water gets into the H663 / H663-RH interior while cleaning, leave un-plugged in a wellventilated room for several hours before using. 3. To prevent discoloration or fading of the case, do not use any chemical or abrasive alcohol-based cleaners. Troubleshooting Common Problems and Solutions These guidelines provide tips to deal with problems you may encounter while us-ing the H663 / H663-RH. If the problem remains unsolved, contact your dealer for assistance. Check the following before proceeding to the problem-specific solutions. Use some other electrical device to confirm that the electrical outlet is working. Ensure the H663 / H663-RH is turned on. Ensure all connections are securely attached. Ensure the attached device is turned on. Tips for Troubleshooting In each problem-specific section, try the steps in the order suggested. This may help you to solve the problem more quickly. Try to pin point the problem and thus avoid replacing non-defective parts. For example, if you replace batteries and the problem remains, put the original batteries back and go to the next step. Keep a record of the steps you take when troubleshooting. The information may be useful when calling for technical support or for passing on to service person-nel. Remote Control or Keyboard Problems Problem: The H663 / H663-RH does not respond to the remote control or the keyboard. 1. Direct the remote control or keyboard towards the remote sensor on the H663 / H663-RH. 2. Ensure the path between the remote and sensor is not obstructed. 3. Check the battery polarity. 4. Replace the batteries. 5. Have the remote control or keyboard serviced. 13

19 Audio Problems Problem: There is no sound. 1. Adjust the volume on the remote control. 2. Adjust the volume of the audio source. 3. Check the audio cable connection. 4. Test the source audio output with other speakers. 5. Have the H663 / H663-RH serviced. Problem: The sound is distorted. 1. Check the audio cable connection. 2. Test the source audio output with other speakers. 3. Have the H663 / H663-RH serviced. Video Problems Problem: Picture is distorted. 1. Check the video cable connections. 2. Check the TV system of disc matches that of your TV set (NTSC/PAL). 3. Have the H663 / H663-RH serviced. 14

20 Appendix A Specifications Board GA - 8I945EF CPU Pentium D 820 / 830 / 920 / 930 (option) DRAM DDRII 512 MB (option) HDD SATAI / SATAII 160GB or 250GB above (option) Dimensions (W) x (D) x 60.8 (H) mm Power Rating 220W Adaptor ( V; 50 / 60 Hz) Chipset 945G / ICH7DH / ALC 880 RealTEK / Intel LAN 82562GZ Front I/O USB 2.0 Port x2 / IEEE 1394 Port (4-pin) / Card Reader / IrDA Peripherals Add-on Cards Operating System A/P Rear I/O Certification MCE Remote Control (option) / Keyboard + Trackball (option) Riser Card / ADD card / Tuner card / FIO board / Card Reader / VFD module MCE (option) GBT driver disk USB 2.0 Port / D-Sub / DVI-I / TV-Out / Audio / LAN (RJ 45) / SPDIF / IEEE 1394 Port / S-Video I/O Windows Logo / EMI / Safety 15

21 2006 年 02 月版權所有本份文件受到國際版權法的保護, 版權為本公司所有, 包括所有的照片圖片及軟體等未經 Giga-byte Technology 股份有限公司書面許可, 不得複製本手冊的任何內容本文件若有任何內容修改, 恕不另行通知製造商不對文件內容代表陳述或提供保證, 更未有任何銷售或適合特殊目的暗示保證製造商保留修訂與隨時更改本文件內容的權利, 不需要通知任何人商標識別 Gigabyte 與 Giga-byte 是 Giga-byte Technology 股份有限公司的商標 Microsoft 和 Windows XP 是微軟公司的商標本手冊所使用的所有其他產品名稱, 皆為其所屬公司的財產, 並獲授權使用

22 FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the parties responsible for compliance could void the user s authority to operate the equipment. 重要的安全資訊建議您在使用 H663 / H663-RH 之前, 先詳細閱讀本節內容這些安全與使用指示將確保您安全地使用 H663 / H663-RH 長達數年之久請妥善本存本手冊以供未來參考之用 H663 / H663-RH 外殼上的警告標誌開始操作前, 務必先查看 H663 / H663-RH 底部的電源功率標籤 RATING LABEL 注意 : 將 H663 / H663-RH 接上電源之前, 請確定電源的電壓在 AC 100~240V, 50~60 Hz 的範圍之內請勿嘗試自行維修 H663 / H663-RH 如果設備受潮或可能受損, 請將設備送修無論在任何情況下, 都不要自行打開設備外殼 I

23 一般安全資訊請勿在設備上放置書本或袋子等重物避免將具有強烈磁性的物品放在本設備周圍如果您懷疑立體聲喇叭可能會干擾設備的運作, 請讓喇叭遠離本設備避免在日光直射處或靠近熱源的地方使用本設備請將其放在通風良好的地方, 以免導致設備過熱為免設備過熱, 請勿擋住設備上方側邊或背部的通風孔請勿打開設備外殼請勿嘗試自行維修 H663 / H663-RH 如果設備要送修, 請連絡合格的服務人員請勿將本設備放在不穩定的表面台車或架子上避免讓 H663 / H663-RH 暴露在潮濕或濕氣很重的地方請遵循本手冊與設備外殼的所有警告標誌與注意事項 II

24 用電安全本設備只能使用隨附的電源線請勿在電源線上放置任何物品, 也不要將電源線放在走道上將設備收藏保存或長期不用時, 請取出遙控器的電池將 H663 / H663-RH 接上電源之前, 請確定電源的電壓在 AC 100~240V,50~60 Hz 範圍之內硬碟分割強烈建議您不要分割硬碟本手冊使用標誌本手冊使用下列標誌提醒您注意重要資訊備註標誌提供該主題的額外資訊提供不應忽略的資訊警告您可能損壞設備或導致身體受傷的狀況提供該主題的有用資訊警告本電池如果更換不正確會有爆炸的危險請依照製造商說明書處理用過之電池 III

25 目錄第一章開始使用 1.1 包裝清單功能特性導覽...2 正視圖...2 背面視圖 VFD ( 真空螢光顯示器 ) 訊息遙控器的功能安裝遙控器電池鍵盤的功能...9 使用軌跡球與按鍵...10 快捷鍵安裝鍵盤電池設定鍵盤連結遙控器與鍵盤的操作範圍...11 第二章連接輸入裝置 2.1 H663 / H663-RH 的基本連接線路第三章基本維護 3.1 H663 / H663-RH 的清潔與維護疑難排解附錄 A 系統規格 IV

26 開始使用包裝清單小心拆開H663 / H663-RH的包裝包裝中除了本使用手冊外還包含下列項目: H663 / H663-RH 回復光碟 (選配) 驅動光碟變壓器無線鍵盤 (選配) 遙控器 (選配) 3.5 RCA 訊號線機上盒 IR 訊號線 (選配) 供無線鍵盤用的兩個3號電池以及供搖控器 (MCE) 用的兩個3號電池 (選配) S 訊號線 (RCA 訊號線) (4 pin) 3.5 x 2 聲音訊號線如果有任何項目遺失損壞或設備無法運作請立刻連絡您的經銷商 1

27 功能特性導覽正視圖電源鍵項目說明按下電源鍵來啟動 H663 / H663-RH 再按一下電源鍵主機則進入待機模式按住電源鍵幾秒即可將 H663 / H663-RH 關閉 2. IEEE 1394 (4-pin) 連接使用符合 IEEE 1394 規格的裝置 3. USB 2.0 埠兩個 USB 埠讓使用者可以連接 USB 裝置例如 : 外接式遊戲搖桿滑鼠鍵盤 4. 無線接收器操縱開關無線鍵盤學習鍵開關 ( 讓接收器辨認訊號 ) 5. LED 顯示器無線鍵盤的 LED 狀態指示燈 6. 紅外線視窗此紅外線視窗僅接收遙控器控制的功能 7. 主選單 / 退出按鍵進入主選單或是離開目前的畫面 8. 方向按鍵導覽選單和項目 9. 輸入按鍵確認選擇的項目 10. 回復按鈕返回到上一個畫面 11. VFD VFD ( 真空螢光顯示器 ) 更多的相關資料請參閱本使用手冊第 4 頁 12. 讀卡機六合一讀卡機 13. DVD Super Multi DVD-Multi 燒錄機 14. DVD 退片按鍵按下此鍵讓 DVD 光碟機退出碟片 2

28 背面視圖 IR BLASTER 項目說明 1. 電源輸入插孔連接電源線的 DC 插孔 2. 麥克風輸入端子接受麥克風輸入裝置 3. 音訊輸出端子 4. 音訊輸入端子連接音訊輸出裝置 ( 例如 : 揚聲器耳機擴音器 ) 接受音訊輸入裝置 ( 例如 : 音樂 CD 播放器 ) 5. S/PDIF 解碼器數位音訊輸出接頭 6. VGA 埠 (15-pin) 7. USB 2.0 埠連接平面螢幕 ( 例如 : 外接式螢幕, LCD 液晶投影機 ) 兩個 USB 埠讓使用者可以連接 USB 裝置例如 : 外接式遊戲搖桿滑鼠鍵盤 8. IEEE 1394 Port (6-pin) 連接使用符合 IEEE 1394 規格的裝置 9. 網路埠連接乙太網路 (10/100/1000-based). *10. S-Video 埠 S-Video 輸入 *11. CATV 有線電視輸入 12. Video 輸出接孔影像訊號輸出孔 13. DVI-I 埠連接數位螢幕 14. 外部紅外線增強器連接孔 ( 選配 ) 外部紅外線增強器連接孔可用來取代任何機上盒的遙控器可遠端控制廣泛範圍 PC 的應用 * 埠的位置可能會因不同機型而有所不同 3

29 VFD( 真空螢光顯示器 ) 訊息 H663 / H663-RH 正面的 LED 顯示幕會顯示目前的狀態資訊除了碟片資訊以外,LED 顯示幕還會顯示下列訊息 : 未使用項目說明 1. 音量比例顯示音量 2. 音量比例顯示音量 3. 模式顯示目前的模式 4. 狀態欄顯示時間資訊媒體播放時間及模式狀態 4

30 正常的 Windows 模式 ( 未執行 Media Center 應用程式 ) / 睡眠模式狀態 : 1. 系統已啟動為正常的 Windows 模式尚未執行 Media Center 應用程式 2. 系統正處於睡眠狀態說明 : 1. 顯示時間, 時鐘由 VFD MCU 控管 2. 顯示左右邊的音量 3. 執行碟片的動作已經停止啟動 Media Center 應用程式 / 在 Media Center 主畫面狀態 : 1. 按開始 " 鍵執行 Media Center 應用程式, 系統處於 Media Center 主畫面 2. 使用者可以利用和選擇 MCE 中的多媒體說明 : 1. 無顯示資訊 2. 執行碟片的動作已經停止 My Video 模式狀態 : 當選擇 My Videos" 時, 螢幕會出現視訊畫面並處於停止模式說明 : 1. 顯示 VIDEO" 字樣 2. 執行碟片的動作呈停止狀態, 直到開始播放媒體為止 5

31 My Picture 模式狀態 : 在 My Pictures" 畫面中並處於停止模式說明 : 1. 顯示 PICTURE" 字樣 2. 執行碟片的動作已經停止 * 當之前選擇的媒體仍然繼續播放時, 執行碟片的動作可以循環進行 My Music 模式狀態 : 在 My Music" 畫面中並處於停止模式說明 : 1. 顯示 MUSIC" 字樣 2. 執行碟片的動作呈停止狀態, 直到開始播放媒體為止 TV 模式狀態 : 在 My TV" 畫面中並處於停止模式說明 : 1. 顯示 TV" 字樣 2. 執行碟片的動作呈停止狀態, 直到開始播放媒體為止 6

32 狀態 : 在 TV 畫面中播放當前的節目說明 : 1. 按一下 CH_PG" 鍵就會顯示頻道編號 2. 執行碟片的動作正在進行狀態 : 在 TV 畫面中播放 TV 錄影節目說明 : 顯示 REC SHOW" 字樣音樂 / DVD / 視訊 / 播放模式狀態 : 在音樂 DVD 視訊及播放模式說明 : 1. 播放音樂時, 會在音樂畫面或主畫面中顯示樂曲時間 2. 執行碟片的動作正在進行 3. 如果在圖片畫面中進入 My Pictures", 則顯示幕就會出現 PICTURE" 字樣光碟燒錄進度狀態 : 光碟燒錄進度說明 : 1. 當點狀區塊填滿時, 就表示燒錄完成了 2. 本範例顯示剩下最後 2 個點就達到 100% 7

33 遙控器的功能項目功能開機 / 關機停止錄影鍵播放暫停倒轉快轉上一首下一首返回更多資訊方向鍵 : 上 / 下輸入鍵 :OK 方向鍵 : 左 / 右下個頻道 (TV) 上個頻道 (TV) START" 選單靜音 VOL VOL 提高音量降低音量 8

34 安裝遙控器電池電池室在遙控器的底面如長時間不使用 H663 / H663-RH, 請取出電池 1. 將扣閂往上拉, 打開電池蓋 2. 依正確的正負極方向 (+/-) 放入 2 個 3 號電池 3. 蓋上電池蓋 1. 只能使用三號電池 2. 請依當地法規丟棄使用完畢的電池 3. 如長時間不使用 H663 / H663-RH, 請取出電池鍵盤的功能左鍵左鍵快速鍵軌跡球 9

35 使用軌跡球與按鍵軌跡球和按鍵的作用與 PC 滑鼠一樣滾動軌跡球可以移動螢幕上的游標, 左鍵與右鍵的使用方法則和標準滑鼠相同快捷鍵除了和標準鍵盤一樣的一般按鍵之外,H663 / H663-RH 鍵盤還有一些快捷鍵, 其功能簡述如下 : 按鍵電源 AV PC IE 功能電源鍵 MCE/PCM 啟動返回 PC 螢幕網際網路電子郵件管理員的快捷鍵安裝鍵盤電池電池室在鍵盤的底面如長時間不使用 H663 / H663-RH, 請取出電池 1. 如圖所示抬起並取下電池蓋 2. 依正確的正負極方向 (+/-) 放入 2 個 3 號電池 3. 裝回電池蓋 1. 只能使用三號電池 2. 請依當地法規丟棄使用完畢的電池 3. 如長時間不使用 H663 / H663-RH, 請取出電池 10

36 設定鍵盤連結 1. 取下蓋子檢查是否已經裝妥電池 ( 請參閱 P.12 安裝鍵盤電池的操作指示 ) 2. 按一下面板上的無線接收器操縱開關按下此鍵後, 其指示燈會亮起 ( 緩慢地 ), 等待來自無線鍵盤的訊號 LED 緩慢閃動按一下此鍵 3. 接著按一下無線鍵盤上的學習鍵, 讓接收器辨認訊號一旦連結成功後, 指示燈就會快速閃動按一下此鍵遙控器與鍵盤的操作範圍遙控器使用紅外線傳輸來控制 H663 / H663-RH 使用時需要將遙控器直接對準 H663 / H663-RH 假設您正面對 H663 / H663-RH, 則在半徑 3 公尺 (10 呎 ) 和 H663 / H663-RH 上下 30 度角的範圍內, 遙控器都能正常運作如果 H663 / H663-RH 沒有回應遙控器的動作, 請稍微靠近一點或更換電池鍵盤使用 RF 傳輸來控制 H663 / H663-RH 使用時不需要將鍵盤直接對準 H663 / H663-RH 假設您正面對 H663 / H663-RH, 則在半徑 10 公尺 ( 無干擾狀況下 ), 鍵盤都能正常運作如果 H663 / H663- RH 沒有回應鍵盤的動作, 請稍微靠近一點或更換電池 11

37 連接輸入裝置 H663 / H663-RH 的基本連接線路 H663 / H663-RH 的許多接頭都支援多種輸入裝置例如,USB 埠可以連接 USB 印表機鍵盤或掃描器等 1394 相容裝置 USB 相容裝置記憶卡 (MMC/SM/SD/MS/CF/MD) 麥克風麥擴音器 / 揚聲器或耳機 CD 播放器 TV DVI-I IR 訊號 1 2 IR BLASTER S/PDIF RGB 顯示器 1394 相容裝置 ADSL Modern or 路由器 (Router) 天線 USB 相容裝置 DVD 播放器 / 桌上機 12

38 基本維護 H663 / H663-RH 的清潔與維護請依照以下步驟來清潔 H663 / H663-RH 的外殼 1. 使用乾淨的軟布來擦拭機殼灰塵 2. 再用溫水沾溼軟布並擰出多餘的水後再擦拭機殼注意 : 1. 在清潔前, 請確認 H663 / H663-RH 已經關閉並且拔去 H663 / H663-RH 的電源插頭至少一小時以上 2. 如果在清潔的過程不小心有一點水滴進了 H663 / H663-RH 機殼內, 請保持電源關閉並不插上電源插頭數小時以上, 使這些水可以自然蒸發 3. 若要防止機殼變色產生污點或退色, 請不要使用有揮發性的清潔劑疑難排解常見的問題與解答以下列出使用 H663 / H663-RH 時, 可能會發生的問題 ; 並且, 提供了簡單的解決方法如果此章節無法解決您的問題時, 請與經銷商或授權服務中心連繫請先依下列逐項檢查, 再開始查詢解決方法使用其他電氣裝置時, 請確認電源已正確連接到主機和電源插座上請確認 H663 / H663-RH 電源已開啟請確認所有連接已分別正確的連接請確認所有連結裝置已經開啟建議解決方法請依照每個問答集所提供建議的先後次序步驟來做這樣可以幫助您更快速的解決您的問題準確的找出問題所在, 避免將沒有缺陷的元件換掉例如, 當你換電池後問題仍存在, 請將原來的電池換回並繼續下個步驟請保留您解決方式的步驟這個資訊將在您打電話尋求技術支援時非常有幫助遙控器或鍵盤問題問題 : H663 / H663-RH 對遙控器或鍵盤指令沒有回應 1. 將遙控器或鍵盤指向 H663 / H663-RH 的遙控感應器 2. 請確認遙控器或鍵盤與感應器之間沒有障礙物 3. 請確認電池的兩極性是否正確 4. 請替換電池 5. 請將遙控器或鍵盤送維修 13

39 音效問題問題 : 音效沒有作用 1. 使用遙控器調整音量 2. 請調整 audio source 的音量 3. 請檢查音訊訊號線是否已正確連接 4. 請用其他揚聲器來測試音訊輸出 5. 請將 H663 / H663-RH 送維修問題 : 音效是扭曲的 1. 請檢查音訊訊號線是否已正確連接 2. 請用其他揚聲器來測試音訊輸出 3. 請將 H663 / H663-RH 送維修影像問題問題 : 照片 / 影像扭曲 1. 請檢查訊號線是否已正確連接 2. 請檢查電視系統是否與您的電視設定 (NTSC/PAL) 相同 3. 請將 H663 / H663-RH 送維修 14

40 附錄 A 系統規格主機板 GA - 8I945EF CPU Pentium D 820 / 830 / 920 / 930 ( 選配 ) DRAM DDRII 512 MB ( 選配 ) 硬碟 SATAI / SATAII 160GB 或 250GB 以上 ( 選配 ) 尺寸電源功率晶片組前端輸入 / 輸出 ( 寬 ) x ( 深 ) x 60.8 ( ) mm 220W 變壓器 ( V; 50 / 60 Hz) 945G / ICH7DH / ALC 880 RealTEK / Intel LAN 82562GZ USB 2.0 埠 x2 / IEEE 1394 埠 (4 pin) / 讀卡機 / IrDA 周邊裝置 MCE 搖控器 ( 選配 ) / 鍵盤 + 軌跡球 ( 選配 ) 附加卡擴充卡 / ADD 卡 / 調頻卡 / FIO 卡 / 讀卡機 / VFD 模組作業系統 MCE ( 選配 ) A/P 後端輸入 / 輸出認證 GBT 驅動程式磁片 USB 2.0 Port / D-Sub / DVI-I / TV-Out / Audio / LAN (RJ 45) / SPDIF / IEEE 1394 Port / S-Video I/O Windows Logo / EMI / Safety 15

港專單一登入系統 (SSO) 讓本校的同學, 全日制及兼職老師只要一個登入帳戶, 便可同時使用由本校提供的網上系統及服務, 包括 Blackboard 網上學習平台, 港專電郵服務, 圖書館電子資料庫及其他教學行政系統.

港專單一登入系統 (SSO) 讓本校的同學, 全日制及兼職老師只要一個登入帳戶, 便可同時使用由本校提供的網上系統及服務, 包括 Blackboard 網上學習平台, 港專電郵服務, 圖書館電子資料庫及其他教學行政系統. 港專單一登入網站網址 http://portal.hkct.edu.hk (HKCT 之教職員, 學生 ) http://portal.ctihe.edu.hk (CTIHE 之教職員,