Mill - DXF and IPS Programming
|
|
- Cecilia George
- 6 years ago
- Views:
Transcription
1 Haas Technical Documentation Mill - DXF and IPS Programming Scan code to get the latest version of this document Translation Available INTRODUCTION AutoCAD DXF (Drawing Interchange Format, or Drawing Exchange Format) is a CAD data file format by Autodesk that lets you exchange data between AutoCAD and other programs. This document tells you how to import a DXF file and convert it to a working IPS program file in a Haas mill. Program Structure These are the steps required to correctly import a DXF file into an IPS program file: 1. Define the tools 2. Import the DXF file. 3. Define the origin point. 4. Select the geometry for the tool path. This must be a closed chain on a mill. 5. Define the operation. 6. Enter the values in the information tabs on the IPS window. 7. Output program to another program or create a new program. Repeat steps 4-7 for multiple operations. Define the Tools Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On June 27, /11
2 Pre-define the tool information, and set the tool and work offsets. 1. Press [MDI]. 2. Press [PRGRM/CONVRS]. 3. Press the [Right ]cursor arrow to go to the Setup tab. 4. Press [WRITE/ENTER] to go into Setup Mode. 5. Press [WRITE/ENTER] to open the Tool tab. 6. Press the [Right] cursor arrow to go to the Work Material box. 7. Press [Up] and [Down] cursor arrows to change the work material type. Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On June 27, /11
3 8. Press [CANCEL] to go back to the main Setup Mode Menu. 9. Use the [Right] cursor arrow to go to the TOOL tab. 10. Press [WRITE/ENTER]. 11. Use [ATC/FWD] and [ATC/REV]to scroll through the available tool numbers in the TOOL field. 12. Use the [Down] cursor arrow to go to the TOOL TYPE field. 13. Use the [Left] and [Right] cursor arrows to scroll through the tool types. 14. Press [NEXT TOOL] to select the tool. Import the DXF Drawing File Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On June 27, /11
4 1. Press LIST PROG. 2. Use the[ Right] cursor arrow to go to the USB Device tab. 3. Press [WRITE/ENTER]. 4. Use the[ Down] cursor arrow to go to the program to import from the USB. 5. Press [F2] to copy the program from the USB device to the control's MEMORY. DXF Overview Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On June 27, /11
5 1 - These are the axis positions relative to the zero origin point of the part. 2 - These command key instructions change based on the operation mode of the program. 3 - This section shows the status or the origin, chain, and toolpath settings. These are the three steps needed to program a part. 4 - Context-sensitive help text is shown in this corner. Origin Point, Geometry Selection, and Operation Definition To set the origin point: 1. Use the Jog Axis keys on the control until the cursor is at the correct X and Y position on the part. 2. Use the [Up] or [Down] cursor arrows to select the point. 3. Type in the X and Y coordinates. 4. Press [WRITE/ENTER]. Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On June 27, /11
6 5. Select a linear segment to begin chaining. 6. In the illustration, a red line [1] means the selected line. 7. The green line and arrow [2] represent the direction of the cut. 8. Press [F2] to begin chaining. 9. The CHAINING OPTIONS dialog box shows. Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On June 27, /11
7 10. Use the [Up] and [Down] cursor arrows to go to the different menu items. 11. Press [WRITE/ENTER] to make a selection. 12. Use the jog axis keys to move the tool to the desired entry point location. 13. Press [WRITE/ENTER]. 14. Use the jog handle to move the tool away from the entry point. 15. Press [F3]. IPS Programming and Program Output After you define the entry point, the screen shows the Intuitive Programming System (IPS) window. Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On June 27, /11
8 1. Use [ATC FWD] and [ATC REV ] to move between the fields. 2. Use the [Up] and [Down] cursor arrows to change the values within the fields. 3. Press [EDIT] to go back to the DXF editor. 4. Enter the values for the remaining fields. 5. Press [F4 ]to output a program. 6. The IPS Recorder dialog box shows. 7. Use the [Up] and [Down] cursor arrows to go to the different options. 8. The context-sensitive text box at the bottom changes with each selection. 9. Press [WRITE/ENTER]. Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On June 27, /11
9 10. If you selected Create Program from the IPS Recorder Menu, the Select/Create Program dialog box shows. 11. To name a new program, Type an O followed by up to 5 numbers. 12. Press [WRITE/ENTER] to save it. 13. The new program from the DXF import shows in the Program window. 14. If you need to adjust any information in the IPS window, press [WRITE/ENTER]. 15. To continue the selection of geometry for more tool paths, press [EDIT]. Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On June 27, /11
10 If you press MENU, the DXF editor opens for another tool and toolpath. The CURRENT GROUPS field in the lower left now has 2 groups. The items in the Step Menu are all green because Group 1 is highlighted in the CURRENT GROUPS box. Use the jog handle or the axis keys to select the geometry for the new tool. To re-use a tool group, press [F2]. Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On June 27, /11
11 The CHAIN OPTIONS menu shows. Use the [Down] cursor arrow to go to DUPLICATE GROUP. Press [WRITE/ENTER.] Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction Last Published On June 27, /11
Lathe - DXF Import and IPS Programming
Haas Technical Documentation Lathe - DXF Import and IPS Programming Scan code to get the latest version of this document Translation Available INTRODUCTION AutoCAD DXF (Drawing Interchange Format, or Drawing
More informationUse a Probe to Measure a Work Offset Again Before a High-Precision Part
Haas Technical Documentation Use a Probe to Measure a Work Offset Again Before a High-Precision Part Scan code to get the latest version of this document Translation Available Known and Unknown WIPS Tasks
More informationTOOLPATHS TRAINING GUIDE. Sample. Distribution. not for MILL-LESSON-4-TOOLPATHS DRILL AND CONTOUR
TOOLPATHS TRAINING GUIDE MILL-LESSON-4-TOOLPATHS DRILL AND CONTOUR Mill-Lesson-4 Objectives You will generate a toolpath to machine the part on a CNC vertical milling machine. This lesson covers the following
More informationBallbar QC20-W - Analysis
Haas Technical Documentation Ballbar QC20-W - Analysis Applies to machines built from: January, 2016 Scan code to get the latest version of this document Translation Available Ballbar QC20-W - Analysis
More informationBobCAD-CAM FAQ #50: How do I use a rotary 4th axis on a mill?
BobCAD-CAM FAQ #50: How do I use a rotary 4th axis on a mill? Q: I ve read FAQ #46 on how to set up my milling machine. How do I enable 4th axis to actually use it? A: Enabling 4th axis in the machine
More informationIntroduction. Parameter Checker Program - CHC LAST UPDATED: 09/19/2018
LAST UPDATED: 09/19/2018 Parameter Checker Program - CHC Introduction This procedure tells you how to download and run the Parameter Checker program. Note that the examples in this procedure show the Windows
More informationHaas Machines in a Network
Haas Technical Documentation Haas Machines in a Network Scan code to get the latest version of this document Translation Available INTRODUCTION This document tells you how to configure Haas machines in
More informationMaincon Control Software (Mill VER18 and Lathe VER11) - Load
Maincon Control Software (Mill VER18 and Lathe VER11) - Load LAST UPDATED: 09/20/2018 Introduction This procedure tells you how to do these tasks on any CNC machine with a Maincon PCB: Install a new Maincon
More informationTRAINING GUIDE WCS - VIEW MANAGER - PART-2
TRAINING GUIDE WCS - VIEW MANAGER - PART-2 Mastercam Training Guide Objectives The learner will create the geometry and toolpaths for WCS-Part-2. This Lesson will cover the following topics: Create a 3-dimensional
More information3 AXIS STANDARD CAD. BobCAD-CAM Version 28 Training Workbook 3 Axis Standard CAD
3 AXIS STANDARD CAD This tutorial explains how to create the CAD model for the Mill 3 Axis Standard demonstration file. The design process includes using the Shape Library and other wireframe functions
More informationCIMCO Machine Simulation Setup and configuration guide
CIMCO Machine Simulation Setup and configuration guide Contents Introduction to Machine Simulation... 3 1. Geometry Manager... 4 2. Simulation interface... 5 3. Simulation Report... 6 Setting up Machine
More informationDeskCNC setup and operation manual
DeskCNC setup and operation manual This document explains how to install, setup and cut foam shapes using DeskCNC 4 axis foam cutting software. The document will go through a step by step process of how
More informationMill Series Training Manual. Haas CNC Mill Operator
Haas Factory Outlet A Division of Productivity Inc Mill Series Training Manual Haas CNC Mill Operator Revised 022613 (032512) (printed 022613) This Manual is the Property of Productivity Inc The document
More information2. Open VCarve Pro. Click the Open an existing file button and select your file.
VCarve Pro This software is used for 2D design and calculation of 2D and 2.5D toolpaths for cutting parts on a CNC Router. The software can import 2D designs from other programs such as FormZ, Rhino and
More informationTRAINING GUIDE SOLIDS-LESSON-3
TRAINING GUIDE SOLIDS-LESSON-3 Mastercam Training Guide Objectives You will generate the solid model from the existing 2-dimensional geometry. This Lesson covers the following topics: Open an existing
More informationLeica 3D Disto PROJECTOR function for stair case applications
Leica 3D Disto PROJECTOR function for stair case applications Workflow description: Measurement Stair Design Set Out of fixing points Preparing the measurement 1 mark 1 point on each wall of the stair
More informationUp to 4-axis plus closed-loop spindle Conversational and G-Code programming in one control Systems for knee mills, bed mills and VMC s USB interface
Up to 4-axis plus closed-loop spindle Conversational and G-Code programming in one control Systems for knee mills, bed mills and VMC s USB interface Acu-Rite 3500i boosts efficiency, versatility, touch
More informationG47 Text Engraving (Group 00) - Mill. Troubleshooting. How it Works. Haas Technical Documentation. Setting 85 is Too High for Shallow Text Engraving
Haas Technical Documentation G47 Text Engraving (Group 00) - Mill Scan code to get the latest version of this document Translation Available Troubleshooting Setting 85 is Too High for Shallow Text Engraving
More informationENET/USB Checkout for XP (Rev. A)
.. ALL-Series March 2006 ENET/USB Checkout for XP (Rev. A).......... Haas Automation Training Procedure Overview ENET/USB The new Ethernet/Hard Drive/USB option, in conjunction with the latest software,
More informationTRAINING GUIDE MILL-LESSON-FBM-1 FBM MILL AND FBM DRILL
TRAINING GUIDE MILL-LESSON-FBM-1 FBM MILL AND FBM DRILL Mastercam Training Guide Objectives Previously in Mill-Lesson-6 and Mill-Lesson-7 geometry was created and machined using standard Mastercam methods.
More informationProf. Steven S. Saliterman Introductory Medical Device Prototyping
Introductory Medical Device Prototyping Department of Biomedical Engineering, University of Minnesota http://saliterman.umn.edu/ Images courtesy of Haas You must complete safety instruction before using
More informationGENIO CAD/CAM software powered by Autodesk technology for parametric programming of boring, routing and edge-banding work centers Genio SPAI SOFTWARE
GENIO CAD/CAM software powered by Autodesk technology for parametric programming of boring, routing and edge-banding work centers Overview is a powerful CAD/CAM system powered by Autodesk 3D environment
More informationToolpaths for Fuselage
Mastercam Chapter 18 Chapter 22 23 Airplane Toolpaths for Fuselage Finish Blend A. Machine Type and Stock Setup. Step 1. If necessary, open your FUSELAGE file from Chapter 17. Step 2. If necessary, display
More informationHFOMN/Haas CNC Series
Haas Factory Outlet A Division of Productivity Inc HFOMN/Haas CNC Series Mill Operator Training Manual with NG2 Next Generation Control & VPS (Visual Programming System) Rev 2/2017 This Manual is the
More informationLeica 3D Disto PROJECTOR in stair case
Leica 3D Disto PROJECTOR in stair case Workflow description: Measurement Stair Design Projection of fixing points Preparing the measurement 1 mark 1 point on each wall of the stair case Measurement of
More informationMastercam X9 for SOLIDWORKS
Chapter 21 CO2 Shell Car Mastercam X9 for SOLIDWORKS A. Enable Mastercam for SOLIDWORKS. Step 1. If necessary, turn on Mastercam for SOLIDWORKS, click the flyout of Options on the Standard toolbar and
More informationTRAINING GUIDE LATHE-LESSON-1 FACE, ROUGH, FINISH AND CUTOFF
TRAINING GUIDE LATHE-LESSON-1 FACE, ROUGH, FINISH AND CUTOFF Mastercam Training Guide Objectives You will create the geometry for Lathe-Lesson-1, and then generate a toolpath to machine the part on a CNC
More informationEdgecam Getting Started Guide
Edgecam Getting Started Guide Getting Started October 2016 1 Contents Contents... 2 Introduction... 4 About this Guide... 4 Other Resources... 5 What is Edgecam?... 6 Supporting Applications... 7 Installing
More informationTRAINING GUIDE. Sample. Distribution. not for LATHE-LESSON-1 FACE, ROUGH, FINISH AND CUTOFF
TRAINING GUIDE LATHE-LESSON-1 FACE, ROUGH, FINISH AND CUTOFF Mastercam Training Guide Objectives You will create the geometry for Lathe-Lesson-1, and then generate a toolpath to machine the part on a CNC
More informationTRAINING GUIDE. Sample not. for Distribution LATHE-LESSON-1 FACE, ROUGH, FINISH AND CUTOFF
TRAINING GUIDE LATHE-LESSON-1 FACE, ROUGH, FINISH AND CUTOFF Mastercam Training Guide Objectives You will create the geometry for Lathe-Lesson-1, and then generate a toolpath to machine the part on a CNC
More informationGetting Started with Alibre CAM. Tutorial 12: Engraving on a Cylinder
Getting Started with Alibre CAM Tutorial 12: Engraving on a Cylinder 344 Introduction This tutorial will illustrate engraving text on a cylinder using a 4 Axis Engraving operation. The stepped instructions
More informationAutodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies
Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies Tim Varner - 2004 The Inventor User Interface Command Panel Lists the commands that are currently
More informationDesign Review: Fundamentals
Design Review: Fundamentals Understanding Autodesk Design Review Autodesk Design Review improves team collaboration and communication by using design information the way it is intended to be used by the
More informationTutorial 1 Engraved Brass Plate R
Getting Started With Tutorial 1 Engraved Brass Plate R4-090123 Table of Contents What is V-Carving?... 2 What the software allows you to do... 3 What file formats can be used?... 3 Getting Help... 3 Overview
More informationInventor 201. Work Planes, Features & Constraints: Advanced part features and constraints
Work Planes, Features & Constraints: 1. Select the Work Plane feature tool, move the cursor to the rim of the base so that inside and outside edges are highlighted and click once on the bottom rim of the
More informationMETBD 110 Hands-On 13 Exploded Assembly
METBD 110 Hands-On 13 Exploded Assembly 1. Open the assembly file created in Hands-On 12. IMPORTANT: For consistent success, use ONLY the method shown in this handout!! 2. Select the View Manager Icon
More informationFigure 1: NC > 2 Axis menu > Options
Click To See: How to Use Online Documents SURFCAM Online Documents J 685)&$0Ã5HIHUHQFHÃ0DQXDO 7 &21),*85$7,21722/6 7.1 INTRODUCTION SURFCAM s default configuration parameters are contained in the SURFCAM.INI
More information9000 CNC 9000 CNC: THE NEW STANDARD OF CONTROL. INTUITIVE EFFICIENT PRODUCTIVE
3D Solid Model Graphics Solid Model with Tool Path Overlay 9000 CNC 9000 CNC: THE NEW STANDARD OF CONTROL. At Milltronics we are constantly refining our controls to simplify operation, shorten setup times
More informationTutorial 3 Model Locomotive Name plate
Getting Started With Tutorial 3 Model Locomotive Name plate Cut2D Disclaimer All CNC machines (routing, engraving, and milling) are potentially dangerous and because Vectric Ltd. has no control over how
More informationSHOP NOTES. GPocket Guide and Reference Charts. for CNC Machinists. Made in the U.S.A. WHAT S INSIDE THIS BOOKLET? Haas Automation, Inc.
SHOP NOTES GPocket Guide and Reference Charts for CNC Machinists Made in the U.S.A. WHAT S INSIDE THIS BOOKLET? Decimal Equivalent Chart / Millimeter to Inch Chart Haas Mill G-Codes / Haas Mill M-Codes
More informationOn the ribbon bar, click the Select from Sketch button.
On the Features toolbar, click the Revolved Protrusion command. On the ribbon bar, click the Select from Sketch button. In the part window, select the Sketch, and on the ribbon bar click the Accept button.
More informationFAGOR AUTOMATION MC TRAINING MANUAL
FAGOR AUTOMATION MC TRAINING MANUAL ACER MC TRAINING MANUAL 8 holes 1/2" depth grid pattern R0.125 1.5 6 unit: inch R0.25 4 1.25 2 2.675 1/2" depth rectangular pocket 1/2" depth circular pocket R0.75 8
More informationLesson 6 The Key Operation Procedures
Lesson 6 The Key Operation Procedures Step-by-step procedures can keep you from having to memorize every function that you must perform on your CNC machining center. You will soon memorize procedures for
More informationOKUMA MACHINING CENTER OPERATORS GUIDE OSP P200M THiNC
OKUMA MACHINING CENTER OPERATORS GUIDE OSP P200M THiNC OSP P200 Mill Training Rev1 1 OKUMA MACHINING CENTER OPERATORS GUIDE Scope 4 Section 1 Guide to Controls on Operation Panels 5 Section 2 Manual Tool
More informationAutodesk Inventor - Basics Tutorial Exercise 1
Autodesk Inventor - Basics Tutorial Exercise 1 Launch Inventor Professional 2015 1. Start a New part. Depending on how Inventor was installed, using this icon may get you an Inch or Metric file. To be
More informationTRAINING GUIDE. Sample Only. not to be used. for training MILL-LESSON-15 CORE ROUGHING, WATERLINE, AND SURFACE FINISH LEFTOVER
TRAINING GUIDE MILL-LESSON-15 CORE ROUGHING, WATERLINE, AND SURFACE FINISH LEFTOVER Mastercam Training Guide Objectives You will use a provided model for Mill-Lesson-15, then generate the toolpaths to
More informationTutorial VCarving Christmas Decorations
Getting Started With Tutorial VCarving Christmas Decorations VCarve Pro Disclaimer All CNC machines (routing, engraving, and milling) are potentially dangerous and because Vectric Ltd has no control over
More informationLesson 1 CAD Mechanical Part 1 Beginning Drawing Objectives
Lesson 1 CAD Mechanical Part 1 Beginning Drawing Objectives In this assignment you will learn to identify important terminology and functions of AutoCAD, to begin a new drawing and save data in the proper
More informationUsing the Filter, Field Sets, and Sort Order Menus
Using the Filter, Field Sets, and Sort Order Menus The Filter menu is used to determine the group of records that appear on the page, such as all active students or former students The Field Sets menu
More informationMultiCAM Lathe Computer Aided Design and Manufacturing Software
MultiCAM Lathe Tab able of Contents 1.0 Getting Started ted Introduction... 3 2.0 Menu Descriptions 2.1 File Menu... 7 2.2 Switch Menu... 12 2.3 Edit Menu... 13 2.4 Draw Menu... 15 2.5 View Menu... 16
More informationContents. Group 2 Excel Handouts 2010
Contents Styles... 2 Conditional Formatting... 2 Create a New Rule... 4 Format as Table... 5 Create your own New Table Style... 8 Cell Styles... 9 New Cell Style... 10 Merge Styles... 10 Sparklines...
More informationUltimate Screen Reference Guide
MACHMOTION Ultimate Screen Reference Guide 8/11/2011 Everything you need to know to use and setup the MachMotion Ultimate Screen. MachMotion Version 1.0.2 2 P a g e Copyright 2011, MachMotion.com All rights
More informationProfile Modeler Profile Modeler ( A SuperControl Product )
Profile Modeler ( A SuperControl Product ) - 1 - Index Overview... 3 Terminology... 3 Launching the Application... 4 File Menu... 4 Loading a File:... 4 To Load Multiple Files:... 4 Clearing Loaded Files:...
More informationTRAINING GUIDE MILL-LESSON-FBM-2 FBM MILL AND FBM DRILL
TRAINING GUIDE MILL-LESSON-FBM-2 FBM MILL AND FBM DRILL Mastercam Training Guide Objectives This lesson will use the same Feature Based Machining (FBM) methods used in Mill-Lesson- FBM-1, how ever this
More informationEZ-Mill EXPRESS TUTORIAL 2. Release 13.0
E-Mill EPRESS TUTORIAL 2 Release 13.0 Copyright Notice This manual describes software that contains published and unpublished works of authorship proprietary to ECAM Solutions, Inc. It is made available
More informationGE FANUC 21 CONCEPT 55 MILL ATC TEACHER GUIDE
GE FANUC 21 CONCEPT 55 MILL ATC TEACHER GUIDE 11/1/07 Version 2 Made by EMCO Authored by Chad Hawk Training Index Control Keyboard Pg 1 Fanuc 21 Control Machine Control Fanuc 21 Screen. Pg 2 Fanuc 21 Keys.
More informationIntroduction. tthink[box] OMAX 5555 JetMachining Center Tutorial: Drawing and Toolpath Generation With Intelli-MAX LAYOUT
tthink[box] OMAX 5555 JetMachining Center Tutorial: Drawing and Toolpath Generation With Intelli-MAX LAYOUT Introduction The OMAX 5555 Jetmachining Center is a precision abrasive jet machining tool. It
More informationMastercam X6 for SolidWorks Toolpaths
Chapter 21 CO2 Shell Car Mastercam X6 for SolidWorks Toolpaths A. Enable Mastercam for SolidWorks. Step 1. If necessary, turn on Mastercam for SolidWorks, click Tools Menu > Add-Ins. Step 2. In the dialog
More informationJewelry Box Lid. A. Sketch Lid Circle. Step 1. If necessary start a new Mastercam file, click FILE Menu > New. Fig. 3
Mastercam X9 Chapter 39 Jewelry Box Lid A. Sketch Lid Circle. Step 1. If necessary start a new Mastercam file, click FILE Menu > New. Step 2. Click CREATE Menu > Arc > Circle Center Point. Step 3. Key-in
More informationHAAS Mini Mill User s Manual
Using the Haas Mini Mills HAAS Mini Mill User s Manual Stanford Product Realization Laboratory Version 1.3 166 1. Machine (Pre) Start-Up a. Check Oil Reservoir (at rear of machine). If Oil Level is below
More informationManaging Content with AutoCAD DesignCenter
Managing Content with AutoCAD DesignCenter In This Chapter 14 This chapter introduces AutoCAD DesignCenter. You can now locate and organize drawing data and insert blocks, layers, external references,
More informationWorking in Print Studio
Working in Print Studio Print Studio is Autodesk's print preparation software. Print Studio keeps your production moving by analyzing, fixing and preparing your 3D files in minutes. Rotate, size, and position
More informationStep 2: To begin creating subregions, be sure you still have the Site Floor Plan selected and then click on the Massing and Site tab (1). Under this t
Abstract: This step by step guide will help you understand how to create subregions in Revit. These subregions will allow you to represent hardscapes and turf areas in your site model. **These steps begin
More informationCraftsman CNC. LinuxCNC. Custom developed for Craftsman CNC Routers
Craftsman CNC LinuxCNC Custom developed for Craftsman CNC Routers Menu File Load gcode Load a gcode program Recent gcode Shows the 10 most recently opened gcode programs Close gcode Closes the current
More informationMill Level 1 Training Tutorial
To order more books: Call 1-800-529-5517 or Visit www.inhousesolutions.com or Contact your Mastercam dealer Mastercam X 5 Copyright: 1998-2010 In-House Solutions Inc. All rights reserved Software: Mastercam
More informationCreating 3D Text with LibreOffice
Creating 3D Text You probably have seen examples of 3D text and perhaps wondered how it can be done. As with most computer graphics, there are a lot of programs that can do 3D modeling. However, there
More informationRevit 2017 Architecture Certification Exam Study Guide
ELISE MOSS Autodesk Autodesk Certified Instructor Revit 2017 Architecture Certification Exam Study Guide Certified User and Certified Professional SDC P U B L I C AT I O N S Better Textbooks. Lower Prices.
More informationEL-CID Quick Reference Version 6.0
New Open Save Print Query Compliance Clone Delete Station Link Link Import Export Preferences Palette Mode Summary ITU Help 1. Click to select a Station icon. Items you can link to/from are colored. 2.
More informationTutorial 3 Kitchen Cabinet Door
Getting Started With Tutorial 3 Kitchen Cabinet Door VCarve Pro Disclaimer All CNC machines (routing, engraving, and milling) are potentially dangerous and because Vectric Ltd has no control over how
More informationSpeedway. Body. (S) on the Sketch toolbar. Fig. 1
Chapter 1 A. New Part. Step 1. Click File Menu > New. Speedway Body Step 2. Click Part from the list and click OK, Fig. 1. B. Sketch Construction Rectangle. Step 1. Click Right Plane in the Feature Manager
More informationFeature-based CAM software for mills, multi-tasking lathes and wire EDM. Getting Started
Feature-based CAM software for mills, multi-tasking lathes and wire EDM www.featurecam.com Getting Started FeatureCAM 2015 R3 Getting Started FeatureCAM Copyright 1995-2015 Delcam Ltd. All rights reserved.
More informationInstructions. elucad Software. Version en Translation of the original instructions. Retain for future use.
Instructions Version 3.0.0 en Translation of the original instructions. Retain for future use. elusoft GmbH Breitwasenring 4 D 72135 Dettenhausen Phone +49(0)7157 526-6500 Fax +49(0)7157 526-6526 info@elusoft.de
More informationUsing Delcam Powermill
Written by: John Eberhart & Trevor Williams DM Lab Tutorial Using Delcam Powermill Powermill is a sophistical tool path generating software. This tutorial will walk you through the steps of creating a
More informationVisualMILL Getting Started Guide
VisualMILL Getting Started Guide Welcome to VisualMILL Getting Started Guide... 4 About this Guide... 4 Where to go for more help... 4 Tutorial 1: Machining a Gasket... 5 Introduction... 6 Preparing the
More informationFig. 2 Mastercam 2020 Spinning Top SW 19 to MCam20 TOOLPATHS Page 13-1
Mastercam 2020 Chapter 13 Spinning Top SOLIDWORKS 19 to Mastercam 2020 A. Open File in Mastercam 2020. Step 1. If necessary, save your Handle and Flywheel parts file in SOLIDWORKS. Step 2. In Mastercam
More informationInterface to icon Construction Instruments and Machine Control
Interface to icon Construction Instruments and Machine Control CONTENTS 1. Preamble 2. Install and Configure LSS 3. Exporting data to Leica Machine Control (Scanlaser) 4. Importing LSS exported files into
More informationCNC Setup. V e r s i o n / 3 0 / C o p y r i g h t A L L R I G H T S R E S E R V E D
CNC Setup U s e r s G u i d e V e r s i o n 1. 0. 0 4 / 3 0 / 2 0 0 7 C o p y r i g h t 2 0 0 7 A L L R I G H T S R E S E R V E D Table of Contents 1. CNC SETUP OVERVIEW... 1 PURPOSE OF CNC SETUP...1 THE
More informationRoadway Alignments and Profiles
NOTES Module 15 Roadway Alignments and Profiles In this module, you learn how to create horizontal alignments, surface profiles, layout (design) profiles, and profile views in AutoCAD Civil 3D. This module
More informationExercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
More informationProfiles - Objectives
Profiles - Objectives What is an InRoads Profile? Creating new Profiles Sources of Profiling paths Display of surfaces & offsets on profiles Available Profiling Controls Displaying Surface Features on
More informationMastercam X6 for SolidWorks Toolpaths
Chapter 14 Spinning Top Mastercam X6 for SolidWorks Toolpaths A. Insert Handle in New Assembly. Step 1. Click File Menu > New, click Assembly and OK. Step 2. Click Browse in the Property Manager, Fig.
More informationCNC Knife. VCarve Pro V8 Software Setup for CNC Knife Jobs:
CNC Knife VCarve Pro V8 Software Setup for CNC Knife Jobs: 1. 2. Run VCarve Pro V8 (Note: VCarve Pro V7 - Shopbot Edition will NOT work) Choose File->Open and select the.dxf file that contains the lines
More informationCAD/CAM DESIGN TOOLS. Software supplied with all new and upgraded Boxford Lathes, Mills and Routers
CAD/CAM DESIGN TOOLS Software supplied with all new and upgraded Boxford Lathes, Mills and Routers The Boxford CAD/CAM Design Tools software is a unique suite of integrated CAD and CAM tools designed specifically
More informationUSER S MANUAL. ArboWebForest. WebUI
USER S MANUAL ArboWebForest WebUI i USER'S MANUAL TABLE OF CONTENTS Page # 1.0 GENERAL INFORMATION... 1-1 1.1 System Overview... 1-1 1.2 Organization of the Manual... 1-1 2.0 SYSTEM SUMMARY... 2-1 2.1
More informationFaber 6000/Faber 6000 Plus USB Driver Installation for Windows 7/10
Faber 6000/Faber 6000 Plus USB Driver Installation for Windows 7/10 This guide covers multiple scenarios and only a subset of this guide will affect each user depending on the plotter version and the version
More informationStrategy. Using Strategy 1
Strategy Using Strategy 1 Scan Path / Strategy It is important to visualize the scan path you want for a feature before you begin taking points on your part. You want to try to place your points in a way
More informationThe ProtoTRAK Parasolid Converter Operating Manual
The ProtoTRAK Parasolid Converter Operating Manual Document: P/N 28070 Version: 042216 Parasolid for Mills Compatible with offline and SMX ProtoTRAK Control models Southwestern Industries, Inc. 2615 Homestead
More information2000 Series Mill / Router Operating Manual
2000 Series Mill / Router Operating Manual 1. Introduction 1.1 Control Startup To open the control software double-click on the profile icon on the desktop. Control Icon 1.2 Overview This manual gives
More informationSmartCAM Production Milling
SmartCAM Production Milling June 1996 Version 9.0 for Microsoft Windows NTS1001184 Release Notes These release notes provide information about new product features and known limitations that are specific
More informationPower Point 2000 Level 1
Introduction Opening PowerPoint, Using the AutoContent Wizard, Window Elements, Working in the Outline and Slide Window Panes, Understanding Different Views, and Saving the Presentation. Contents Introduction
More informationModule 1: Basics of Solids Modeling with SolidWorks
Module 1: Basics of Solids Modeling with SolidWorks Introduction SolidWorks is the state of the art in computer-aided design (CAD). SolidWorks represents an object in a virtual environment just as it exists
More informationIBM TRIRIGA Application Platform Version 3.2. Graphics User Guide. Copyright IBM Corp i
IBM TRIRIGA Application Platform Version 3.2 Graphics User Guide Copyright IBM Corp. 2011 i Note Before using this information and the product it supports, read the information in Notices on page 31. This
More informationSimplyCam V3. Documentation
SimplyCam V3. Documentation Introduction to SimplyCam SimplyCam is a simple Cad/Cam system that creates toolpaths (G-Code). The geometric part can be created internally, with the available tools or imported
More informationBelt Buckle A. Create Rectangle. Step 1. If necessary start a new Mastercam file, click New
Mastercam 2017 Chapter 35 Belt Buckle A. Create Rectangle. Step 1. If necessary start a new Mastercam file, click New (Ctrl-N) on the Quick Access Toolbar QAT. Step 2. On the Wireframe tab click Rectangle.
More informationTechno CNC Router Instructions Wednesday, June 08, 2005
Techno CNC Router Instructions Wednesday, June 08, 2005 Location: Woodshop N51 1 Getting Started: Process Overview 2 AutoCAD: Creating the Cutting Geometry 3 Ezcam: Preparing the Geometry for G-Code Generation
More informationMASTERCAM DYNAMIC MILLING TUTORIAL. June 2018
MASTERCAM DYNAMIC MILLING TUTORIAL June 2018 MASTERCAM DYNAMIC MILLING TUTORIAL June 2018 2018 CNC Software, Inc. All rights reserved. Software: Mastercam 2019 Terms of Use Use of this document is subject
More informationKEYCREATOR 3D Direct Modeling Software
KeyCreator Lesson KC8192 Engraving Text on a Cylindrical Surface In this exercise we ll create a tool path to engrave text on a cylindrical surface. Start with a new file in view 2. (The Front View.) Click
More informationRhinoCAM 2018 MILL Quick Start Guide. MecSoft Corporation
2 Table of Contents About this Guide 4 1 Useful... Tips 4 2 About... the MILL Module 4 3 Using this... Guide 5 Getting Ready 6 1 Running... RhinoCAM 2018 6 2 About... the RhinoCAM Display 6 3 Launch...
More informationSketchUp Tool Basics
SketchUp Tool Basics Open SketchUp Click the Start Button Click All Programs Open SketchUp Scroll Down to the SketchUp 2013 folder Click on the folder to open. Click on SketchUp. Set Up SketchUp (look
More informationOcé Engineering Exec. Advanced Import and Index
Océ Engineering Exec Advanced Import and Index Océ-Technologies B.V. Copyright 2004, Océ-Technologies B.V. Venlo, The Netherlands All rights reserved. No part of this work may be reproduced, copied, adapted,
More information