Team 7000 V2.0.0 for HPUX/HPOV4

Size: px

Start display at page:

Download "Team 7000 V2.0.0 for HPUX/HPOV4"

Myron Barnett
6 years ago
Views:

1 Team 7000 V2.0.0 for HPUX/HPOV4 Release Notes, Version R904-H200, Issue 1 General DataComm

3 TEAM 7000 V2.0.0 for HPUX/HPOV4 1.0 Overview GDC Publication No. 087R904-H200 These installation and release notes provide new information relevant to the TEAM 7000 V2.0.0 software product which update the information supplied by the TEAM 7000 Operation Manual 087R705-V200. If you require additional details please refer to that manual. Refer to the HP OpenView User s Guide and the HP OpenView Administration Reference to help you with OpenView. If you have questions concerning any of the information provided here, please contact your GDC field representative. 2.0 Changes Since Last Release This is the initial release of TEAM 7000 on the HP-UX 10.x platform. In Reports a new File menu selection has been added. The Save Data to File selection allows the user to save collected statistical data to an ASCII text file with a user selectable filename. 3.0 OpenView for HP-UX 10.x TEAM 7000 V2.0.0 Requirements The following sections describe TEAM 7000 V2.0.0 hardware and software requirements for the OpenView for HP-UX 10.x environment. 3.1 Hardware Requirements The TEAM 7000 V2.0.0 software installation requires the following: HP 9000 series model 700 or greater with a minimum of 96 Megabytes of RAM and 2 Gigabytes hard disk Minimum disk space /opt 60 megabytes The graphics card should support a resolution of 1152x900. Please refer to the HP OpenView Network Node Manager Products Installation Guide for Release (HP p/n J /96) for information regarding hardware requirements for HP OpenView Network Node Manager products. Required Hardware SCM version or higher SC7001 firmware version E- or higher SC7002 firmware version A- or higher Installation and Release Notes for GDC Part No. 058U715-C01A Page 3

4 GDC Publication No. 087R904-H200 TEAM 7000 V2.0.0 for HPUX/HPOV4 3.2 Software Requirements Before installing TEAM 7000 V2.0.0 for HP Openview/HP-UX (GDC p/n 058U715-C01A), the following software must be installed NOTE: It is the customer s responsibility to install the listed HP software and have it fully operational before loading the General DataComm TEAM applications. HP-UX Operating System Version 10.x HP OpenView Network Node Manager Release B The most recent HP-UX and HP OpenView patches for these versions GDC software required for TEAM 7000 V2.0.0 installation: TEAMCORE V1.6.0 for HPUX10/HPOV4 GDC p/n 058U708-C01A Media CD ROM MIBs supported SCM version 3.00J SC7001 version 1.00F SC7002 version 1.00P 3.3 First Time Installation The following procedure describes installation of TEAM 7000 V2.0.0 software: To install TEAM 7000 V2.0.0 software: 1. Have all users exit OpenView for HP-UX 10.x. It is important that all users exit OpenView for HP-UX 10.x. 2. Insert the TEAM 7000 V2.0.0 CD into the CDROM drive. 3. At a shell prompt become super-user by entering the following command: su root 4. Check to make sure there is a /cdrom directory already present in / and create it if there is not. 5. Start the installation process by entering the following commands: csh mount /dev/dsk/c0t2d0 /cdrom cd /cdrom./install* Page 4 Installation and Release Notes for GDC Part No. 058U715-C01A

5 TEAM 7000 V2.0.0 for HPUX/HPOV4 GDC Publication No. 087R904-H200 The install script will automatically stop HP OpenView background processes by running /opt/ov/bin/ovstop. Files will be extracted from CD to hard disk, an operation that will take a few minutes. The script then automatically runs swremove, which displays a graphical user interface that you can use to remove existing TEAM 7000 software. If this is a first time installation of TEAM 7000, select File->Exit to dismiss the GUI. If there is existing TEAM 7000 software to remove, use the following procedure: A. Select TEAM B. Select Actions->Mark for Remove. C. Select Remove (analysis). D. Select OK. E. Ignore the error pop-up "$HOME..sw/sessions/swinstall.last" by selecting OK. F. At the end select File->Exit The script then automatically runs swinstall, which displays a graphical user interface for installing the TEAM 7000 software. Use the following procedure: A. Select TEAM 7000 application. B. Select Actions->Mark for Install. C. Select Install (analysis) D. Select OK. E. Ignore the error pop-up "$HOME..sw/sessions/swinstall.last" by selecting OK Installation will now start and take a few minutes The install script will automatically run /opt/ov/bin/ovstart to start HP OpenView background processes. 6. Unmount the CD ROM by typing the commands cd / umount /cdrom exit and remove the CD 7. Confirm HP OpenView and the TEAM processes are running by typing the command: /opt/ov/bin/ovstatus 8. If all processes are running OK, log out from root (i.e. exit) Installation and Release Notes for GDC Part No. 058U715-C01A Page 5

6 GDC Publication No. 087R904-H200 TEAM 7000 V2.0.0 for HPUX/HPOV4 9. Exit super-user (type exit). 10. As a user, type csh to run the c shell, thereby setting the required environment variables. 11. To start HP Openview, type: ovw & 3.4 De-installation The following procedure describes de-installation of TEAM 7000 V2.0.0 software. To remove TEAM 7000 V2.0.0 software: 1. Have all users exit OpenView for HP-UX 10.x. It is important that all users exit OpenView for HP-UX 10.x. 2. Insert the TEAM 7000 V2.0.0 CD into the CD ROM drive. 3. At a shell prompt, become super-user by typing su root 4. Start the removal process by entering the following commands: csh mount /dev/dsk/c0t2d0 /cdrom cd /cdrom./remove* 5. The remove script will automatically run /opt/ov/bin/ovstop to stop HP OpenView background processes. It then starts swremove, which displays a graphical user interface that you can use to remove existing TEAM 7000 software. Use the following procedure: A. Select TEAM7000. B. Select Actions->Mark for Remove. C. Select Remove (analysis). D. Select OK. E. At the end select File->Exit The remove script will automatically run /opt/ov/bin/ovstart to start HP OpenView 6. Unmount the CD ROM by typing the command cd / umount /cdrom exit and remove the CD. Page 6 Installation and Release Notes for GDC Part No. 058U715-C01A

7 TEAM 7000 V2.0.0 for HPUX/HPOV4 7. Exit as super user (type exit). GDC Publication No. 087R904-H TEAM 7000 Packages Table I lists all the packages that are present in the TEAM CD. At any time these packages with the versions indicated in the table or greater should be present. To verify the version of a package currently installed, type the following command: /usr/sbin/swlist -1 fileset TEAM7000.<Package Name> Package Name Description Version GDCSC7001 GDC TEAM GDCSC7002 GDC TEAM Known Issues An HP OpenView error can occur at intermittent times when a user attempts to bring up an image of a TEAM shelf unit after double-clicking on the shelf icon. The error message is as follows: Background graphic file /usr/tmp/shelfname.gif cannot be loaded for submap ShelfName. This will cause the shelf submap to come up without any background image, although it does remain functional. If you close the submap and bring it up again the background image will appear. A Window Manager problem exists when application screens create submenus that hide the main screen from view. The main screen cannot be brought forward by simply clicking the mouse on the title bar area. The submenu must be dragged out of the main screen area in order to make the main screen visible. 5.0 Operating Guidelines The HP-UX workstation should also contain the file etc/rc.config.d/ov500 with the following information: SHLIB_PATH=/lib:/usr/lib:/opt/OV/lib/teamcore export SHLIB_PATH If this information is not present the GDC background daemons will not start after a reboot. Installation and Release Notes for GDC Part No. 058U715-C01A Page 7

8 GDC Publication No. 087R904-H200 TEAM 7000 V2.0.0 for HPUX/HPOV4 Make sure that the HP-UX system application font size is set to 10PT. This is done through the Font button within the Style Manager in the VUE workspace area. If it is set larger than 10PT, some TEAM application windows will not be able to display the entire textual information that they contain. The user must always start HP OpenView from a user account, not from the root account. The keyboard Num Lock or Caps Lock key if pressed (On) will make the mouse buttons and scroll bars inoperable. If an X-TERMINAL is being run on a server, its shelf map will not be automatically updated when a new SpectraComm card is added to the shelf. The X-TERMINAL map is not updated because the map is read-only. To update the map you must select Map->Refresh Map from the shelf map menu bar. This procedure will also close all sub-maps. Read-only maps will not be automatically updated. Use Map->Refresh Map to update the maps. After an install of TEAM software or a reboot of the system TEAM applications may take up to one minute to start up. This is due to the loading of shared libraries. When a remote unit, 600 remote devices, stop responding, there is no indication of this on the submaps, i.e. the remote unit icon stays the same color as a responding remote unit. The name field on the application screen may not display the correct shelf name if the shelf name has been changed. To correct the problem, the shelf name must be changed on each submap in order to display the shelf name correctly on all applications. Page 8 Installation and Release Notes for GDC Part No. 058U715-C01A

10 General DataComm, Inc.

Team 7000 V2.1.0 for HPUX/HPOV4

Team 7000 V2.1.0 for HPUX/HPOV4 Release Notes, Version 2.1.0 087R904-H210-01 General DataComm Warranty General DataComm warrants that its equipment is free from defects in materials and workmanship. The