S_Cal PRO. Caliper. Proximity output data! DESCRIPTION PROXIMITY
|
|
|
- Alice Robinson
- 5 years ago
- Views:
Transcription
1 HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains a leader in this market and offers a range of calipers with digital read-out of a measurement capacity from 150 to Other handtools complete this range. Sylvac inductive measuring system (patented) Data output Power supply: Lithium battery 3V, Type CR 2032 Operational temperature: +5 to +40 C /inch selection
2 Caliper DESCRIPTION S_Cal PRO PROXIMITY Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and ground Thumb wheel on request (see accessories) Great comfort of use thanks to its ergonomic frame Digital display LCD, Height of digits 7 S_Connect Proximity Thickness of frame 3.5 Simple and intuitive functions Proximity output data! * description on page 5 8
3 Caliper DIMENSIONL DRWING S_Cal PRO PROXIMITY TECHNICL SPECIFICTIONS Measuring range Max. Error G µm 20 1) 20 1) C D E 16 x x x x 4 Depth rod 4 x 1.4 Ø x Protection rating according to IEC IP67 with or without connector S_Connect : Proximity US / RS232 / Wireless 2) Functions Zero setting, /inch, Data Smart Inductive Sensor 1) > 100 : 30 µm / DIN 862 2) see cables chapter 9
4 Micron Caliper DESCRIPTION S_Cal PRO µm PROXIMITY MICRON Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Thumb wheel on request (see accessories) Mechanical frame in stainless steel, hardened and ground Improved parallelism of internal jaws compared to version S_Cal PRO Preset Resolution 0,001 or 0, µm repeatability Digital display LCD, Height of digits 7 1 µm resolution S_Connect Proximity Thickness of frame 3.5 Simple and intuitive functions Proximity output data! 4µm repeatability * description on page 5 10
5 Micron Caliper DIMENSIONL DRWING S_Cal PRO µm PROXIMITY MICRON TECHNICL SPECIFICTIONS Measuring range Max. Error G µm C D E Depth rod Protection rating according to IEC S_Connect : Proximity Functions Smart Inductive Sensor 1) < 100 : 15 µm / > 100 : 30 µm / DIN 862 2) see cables chapter ) 15 1) x x x 1.4 Ø1.5 IP67 with or without connector US / RS232 / Wireless 2) /inch, preset, zero setting, Data 11
6 Caliper DESCRIPTION Standard professionnal caliper New extra-large display utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and grinded Great comfort of use thanks to its ergonomic frame Thumb wheel on request (see accessories) S_Cal EVO STNDRD Digital display LCD, Height of digits 11.5 Thickness of frame 3.5 Simple and intuitive functions Spring gib Sliding mechanism Coolant and lubricant resistant * description on page 5 12
7 Caliper DIMENSIONL DRWING S_Cal EVO STNDRD C E 1.5 E D 4x1.4 TECHNICL SPECIFICTIONS Measuring range Max. Error G µm 20 1) 20 1) C D E 16 x x x x 4 Depth rod 4 x 1.4 Ø x Protection rating according to IEC IP54 Functions Zero setting, Preset (max ), /inch, Hold Smart Inductive Sensor 1) > 100 : 30 µm / DIN
8 Caliper DESCRIPTION S_Cal EVO T LUETOOTH Integrated luetooth Smart data transmission New extra-large display Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and grinded Great comfort of use thanks to its ergonomic frame Thumb wheel on request (see accessories) Digital display LCD, Height of digits 11.5 Prograable button according to your needs luetooth 4.0 built-in Thickness of frame 3.5 Simple and intuitive functions luetooth data transmission and IP67 protection rating! * description on page 5 14
9 C D Caliper DIMENSIONL DRWING S_Cal EVO T LUETOOTH E 4x1.4 TECHNICL SPECIFICTIONS Measuring range Max. Error G µm C D E Depth rod Protection rating according to IEC Connection Functions Smart Inductive Sensor 1) > 100 : 30 µm / DIN ) x x ) x 3.5 Ø 1.5 IP x x 1.4 uilt-in LUETOOTH 4.0* Zero setting, Preset (max ), /inch, Hold, Data x 4 * Up to 8 instruments connected per dongle # More informations on How to use luetooth leaflet SYL_1401_EN_T
10 Caliper DESCRIPTION Integrated luetooth Smart data transmission (depends on model) Carbide tips New extra-large display Prograable button according to your needs (depends on model) utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and grinded Great comfort of use thanks to its ergonomic frame Thumb wheel on request (see accessories) S_Cal EVO CRIDE Digital display LCD, Height of digits 11.5 Prograable button according to your needs luetooth 4.0 built-in Thickness of frame 3.5 Simple and intuitive functions Carbide tips Carbide tips * description on page 5 16
11 Caliper DIMENSIONL DRWING S_Cal EVO CRIDE C E D 4x1.4 TECHNICL SPECIFICTIONS Measuring range Max. Error G µm C D E Depth rod Protection rating according to IEC Connection Functions Smart Inductive Sensor 1) > 100 : 30 µm / DIN ) x 3.5 Ø 1.5 IP ) IP67 - uilt-in LUETOOTH 4.0* x x 1.4 Zero setting, Preset (max ), /inch, Hold, Data * Up to 8 instruments connected per dongle # More informations on How to use luetooth leaflet SYL_1401_EN_T 17
12 Micron Caliper DESCRIPTION S_Cal EVO T µm MICRON Integrated luetooth Smart data transmission New extra-large micron display Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and grinded Great comfort of use thanks to its ergonomic frame Thumb wheel on request (see accessories) Digital display LCD, Height of digits 11.5, 1 µm resolution Prograable button according to your needs luetooth 4.0 built-in Thickness of frame 3.5 Simple and intuitive functions 4µm repeatability * description on page 5 18
13 Micron Caliper DIMENSIONL DRWING S_Cal EVO T µm MICRON C E D 4x1.4 TECHNICL SPECIFICTIONS Measuring range Max. Error G µm C D E Depth rod Protection rating according to IEC Connection Functions Smart Inductive Sensor 1) > 100 : 30 µm / DIN ) x x 1.4 IP67 uilt-in LUETOOTH 4.0* ) x 3.5 Ø 1.5 IP67 Zero setting, Preset (max ), /inch, Hold, Data * Up to 8 instruments connected per dongle # More informations on How to use luetooth leaflet SYL_1401_EN_T 19
14 Special caliper DESCRIPTION S_Cal EVO T EG EXTERNL GROOVE Integrated luetooth Smart data transmission Special jaws for measuring grooves and external seatings Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and grinded Great comfort of use thanks to its ergonomic frame Digital display LCD, Height of digits 11.5 Prograable button according to your needs luetooth 4.0 built-in Thickness of frame 3.5 Special jaws for mesuring grooves and external seatings Simple and intuitive functions For measuring grooves and external seatings * description on page 5 20
15 Special caliper DIMENSIONL DRWING S_Cal EVO T EG EXTERNL GROOVE x x TECHNICL SPECIFICTIONS Measuring range Max. Error G µm Depth rod Protection rating according to IEC Connection Functions Smart Inductive Sensor 1) > 100 : 30 µm / DIN ) 4 x 1.4 IP67 uilt-in LUETOOTH 4.0* Zero setting, Preset (max ), /inch, Hold, Data * Up to 8 instruments connected per dongle # More informations on How to use luetooth leaflet SYL_1401_EN_T 21
16 Special caliper DESCRIPTION S_Cal EVO T IG INTERNL GROOVE Integrated luetooth Smart data transmission Special jaws for measuring grooves and internal seatings Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and grinded Great comfort of use thanks to its ergonomic frame Digital display LCD, Height of digits 11.5 Prograable button according to your needs luetooth 4.0 built-in Thickness of frame 3.5 Special jaws for mesuring grooves and internal seatings Simple and intuitive functions For measuring grooves and internal seatings * description on page 5 22
17 Special caliper DIMENSIONL DRWING S_Cal EVO T IG INTERNL GROOVE x x TECHNICL SPECIFICTIONS Measuring range Max. Error G µm Depth rod Protection rating according to IEC Connection Functions Smart Inductive Sensor ) 4 x 1.4 IP67 uilt-in LUETOOTH 4.0* Zero setting, Preset (max ), /inch, Hold, Data 1) > 100 : 30 µm / DIN 862 * Up to 8 instruments connected per dongle # More informations on How to use luetooth leaflet SYL_1401_EN_T 23
18 Special caliper DESCRIPTION S_Cal EVO T DM DEEP MESUREMENT Integrated luetooth Smart data transmission Long internal jaws for deep measurements Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and grinded Great comfort of use thanks to its ergonomic frame Digital display LCD, Height of digits 11.5 Prograable button according to your needs luetooth 4.0 built-in Thickness of frame 3.5 Long jaws Simple and intuitive functions Long internal jaws for deep measurements * description on page 5 24
19 Special caliper DIMENSIONL DRWING S_Cal EVO T DM DEEP MESUREMENT x3.5 4x TECHNICL SPECIFICTIONS Measuring range Max. Error G µm Depth rod Protection rating according to IEC Connection Functions Smart Inductive Sensor ) 4 x 1.4 IP67 uilt-in LUETOOTH 4.0* Zero setting, Preset (max ), /inch, Hold, Data 1) > 100 : 30 µm / DIN 862 * Up to 8 instruments connected per dongle # More informations on How to use luetooth leaflet SYL_1401_EN_T 25
20 Special caliper DESCRIPTION S_Cal EVO T PJ POINTS JWS Integrated luetooth Smart data transmission Interchangeable round polished anvils for measuring internal grooves Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and grinded Great comfort of use thanks to its ergonomic frame Digital display LCD, Height of digits 11.5 Prograable button according to your needs luetooth 4.0 built-in Thickness of frame 3.5 Simple and intuitive functions Round-tipped anvils for grooves and internal seatings M2.5 Interchangeable anvils * description on page 5 26
21 Special caliper DIMENSIONL DRWING S_Cal EVO T PJ POINTS JWS Ø2.5 16x x TECHNICL SPECIFICTIONS Measuring range Max. Error G µm Depth rod Protection rating according to IEC Connection Functions Smart Inductive Sensor ) 4 x 1.4 IP67 uilt-in LUETOOTH 4.0* Zero setting, Preset (max ), /inch, Hold, Data 1) > 100 : 30 µm / DIN 862 * Up to 8 instruments connected per dongle # More informations on How to use luetooth leaflet SYL_1401_EN_T 27
22 Depth gauge DESCRIPTION S_Depth EVO T TJ TWO FIXED MESURING JWS Integrated luetooth Smart data transmission Special depth gauge with bridge 100 and clamping screw Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and grinded Digital display LCD, Height of digits 11.5 Prograable button according to your needs luetooth 4.0 built-in Thickness of frame 3.5 Simple and intuitive functions Optional accessories PR (included) PR PRC ridge of 100 PRD PRE PRF PR-W (titanium) Interchangeable anvils 28
23 Depth gauge DIMENSIONL DRWING S_Depth EVO T TJ TWO FIXED MESURING JWS / PR PR PRC PRD PRE PRF TECHNICL SPECIFICTIONS Measuring range Max. Error µm Resolution Connexion Functions Smart Inductive Sensor 1) ± 1 digit 2) see cables chapter x3.5 uilt-in LUETOOTH 4.0* Zero setting, Preset (max ), /inch, Hold, Data * Up to 8 instruments connected per dongle # More informations on How to use luetooth leaflet SYL_1401_EN_T 29
24 Depth gauge DESCRIPTION S_Depth EVO T SF SHORTCUT MESURING FCE Integrated luetooth Smart data transmission Special depth gauge with bridge 100 and clamping screw Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and grinded Digital display LCD, Height of digits 11.5 Prograable button according to your needs luetooth 4.0 built-in Thickness of frame 3.5 Simple and intuitive functions ridge of 100 ridge of 100 with clamping screw 30
25 Depth gauge DIMENSIONL DRWING S_Depth EVO T SF SHORTCUT MESURING FCE Ø TECHNICL SPECIFICTIONS Measuring range Max. Error µm Resolution Connexion Functions Smart Inductive Sensor 1) ± 1 digit 2) see cables chapter x3.5 uilt-in LUETOOTH 4.0* Zero setting, Preset (max ), /inch, Hold, Data * Up to 8 instruments connected per dongle # More informations on How to use luetooth leaflet SYL_1401_EN_T 31
26 Depth gauge DESCRIPTION S_Depth EVO T RP ROTRY PIN Integrated luetooth Smart data transmission Special depth gauge double with adjustable anvil and clamping screw Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, utomatic wake-up by moving the electronic on his frame. (bsolute System S.I.S) Sleeping mode after 20 min. of no use. (bsolute System S.I.S) Position memorized in sleeping mode, bsolute System S.I.S* Maximum speed of displacement : 2.5 m/sec Mechanical frame in stainless steel, hardened and grinded Digital display LCD, Height of digits 11.5 Prograable button according to your needs luetooth 4.0 built-in Thickness of frame 3.5 djustable anvil Simple and intuitive functions djustable anvil! 32
27 Depth gauge DIMENSIONL DRWING S_Depth EVO T RP ROTRY PIN Ø TECHNICL SPECIFICTIONS Measuring range Max. Error µm Resolution Connexion Functions Smart Inductive Sensor 1) ± 1 digit 2) see cables chapter x3.5 uilt-in LUETOOTH 4.0* Zero setting, Preset (max ), /inch, Hold, Data * Up to 8 instruments connected per dongle # More informations on How to use luetooth leaflet SYL_1401_EN_T 33
28 S_Cal / S_Depth CCESSORIES FOR CLIPERS 2.40 DIGI ECO R/L RIDGE IP RTICOLO UTILE SEZ ST RIS TOLL CODICE PESO I ECO R/L RIDGE X ,260 I ECO R/L RIDGE X ,295 I ECO R/L RIDGE X ,315 I ECO R/L RIDGE X ,330 I ECO R/L RIDGE X ,350 I ECO R/L RIDGE X ,390 I ECO R/L RIDGE X , ccessory kit for S_Cal Ø ase for 9 Depth Measurement Thumb wheel PONTI Thumb wheel RTICOLO CODICE PESO RIDGE ECO M S_Cal PRO S_Cal PRO µm S_Cal EVO S_Cal EVO T S_Cal EVO µm See also chapter cables. M CCESSORIES FOR SPECIL DEPTH CLIPER (TJ / SF / RP) Length Thickness dditional base dditional base RTICOLO CODICE PESO RIDGE ECO M Double additionnal base
29 S_Cal / S_Depth SIC INSTRUMENT Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate (S_Cal PRO et EVO µm) PPLICTIONS Depth measurement with S_Cal PRO and base S_Cal with kit Depth measurement of small internal Ø S_Cal PRO µm Comparison measurement Part measurement with S_Cal µm Part measurement with sending data Depth measurement with S_Cal EVO µm 35
30 Special S_Cal & S_Depth PPLICTIONS Internal groove measurement with S_Cal EVO T IG Internal groove measurement with S_Cal EVO T IG Internal measurement with S_Cal EVO T PJ Deep measurement with S_Cal EVO T DM Deep measurement with S_Cal EVO T DM External groove measurement with S_Cal EVO T EG External groove measurement with S_Cal EVO T EG External groove measurement with S_Cal EVO T EG S_Depth EVO T TJ counicating with Sylvac T Smart pp on touchpad 36
d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected Absolute System S.I.
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected Absolute System S.I.
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
S_Cal PRO. Professionnal Caliper DESCRIPTION
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity
HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain
S_Cal EVO. Professionnal Caliper DESCRIPTION
Professionnal Caliper DESCRIPTION S_Cal EVO Integrated data transmission New extra-large display Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants,
CALIPERS. Workshop Vernier Caliper 100 Series. Large Workshop Vernier Caliper 150 Series. Partners in Precision
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with stop screw Assembly slider model 4-way measurement Made of hardened alloyed stainless steel Chromed scale with engraved
HEIGHT GAUGE Hi_Cal & Hi_Gage ONE
HEIGHT GAUGE & Hi_Gage ONE Specially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.
DIGITAL INDICATORS S_DIAL
DIGITAL IDICATORS S_DIAL The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle. A sensor replaces the gears. The analogic display is transformed
Summer Promo Precision Tool & Instruments Prices effective July 1st through Sept. 30th, Unless noted otherwise
S u m m e r 2 0 1 4 S p e c i a l s Summer Promo 2014 Precision Tool & Instruments Prices effective July 1st through Sept. 30th, 2014. Unless noted otherwise Season 2014 S u m m e r 2 0 1 4 S p e c i
Swiss manufacturer of precision measuring instruments since 1969 PROMOTIONS JULY - SEPTEMBER. Summer 2017
Swiss manufacturer of precision measuring instruments since 1969 TIONS JULY - SEPTEMBER Summer 2017 Validity : 30.09.2017 200 EUR MARKET LEADING DIGITAL INDICATORS AT PREFERENTIAL PRICES ONE CONFIGURABLE
MICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit
Traditional External Micrometer 1961 Series Standard: BS870, DIN 863/1, ISO361 All models feature Tungsten carbide measuring faces 6.5mm spindle diameter Speeder type ratchet Locking lever Choice of standard
Bestsellers n 1. p.2 p.6 p.4 p.10
Bestsellers 2018 n 1 p.2 p.6 p.4 p.10 Validity: 1. 2. 2018 31. 7. 2018 2 S_Dial WORK Basic & Advanced Very easy to use Best ratio quality/price on the market Basic or advanced functions Data output Proximity/Power
Indicator not included
Baty Dual Plane Digital Height Gauge Range up to 0-600mm Measures offset components Can be used as an ordinary digital caliper Easy to use clear readout Large ground face to ensure component square when
HEIGHT GAUGE Hi_Cal 150 / 300
HEIGHT GAUGE 150 / 300 Especially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.
500 mm INTERNAL MEASURING INSTRUMENTS
INTERNAL MEASURING INSTRUMENTS SYLVAC offers a large range of internal measuring instruments made of interchangeable or points mechanical heads and electronic units with digital display, integrated in
ALL-INCLUSIVE, EASY TO USE
THE ESSENTIAL METROLOGY CATALOGUE 16/17 Calipers INNOVATIVE NEW PRODUCTS THROUGHOUT THIS ALL-INCLUSIVE, EASY TO USE REFERENCE INTRODUCTION ISO 9001:2015 Quality Guaranteed In 2016 Bowers achieved the latest
SPECIAL PROMOTIONS! Summary. Swiss manufacturer of precision measuring instruments since 1969
Swiss manufacturer of precision measuring instruments since 1969 µ_prices Validity 01.01.14-31.12.14 Summary S_Cal PRO & S_Cal PRO µm p.2 S_Cal UL III p.3 S_Mike PRO p.4 S_Depth PRO p.5 X_TREME p.6 S_Dial
ALL-INCLUSIVE, EASY TO USE
THE ESSENTIAL METROLOGY CATALOGUE 16/17 Partners in Precision Micrometers INNOVATIVE NEW PRODUCTS THROUGHOUT THIS ALL-INCLUSIVE, EASY TO USE REFERENCE INTRODUCTION ISO 9001:2015 Quality Guaranteed In 2016
Calipers. B-1
alipers www.tesatechnology.com -1 alipers THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation,
HEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision
Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale
SPECIAL PROMOTIONS! Summary. Swiss manufacturer of precision measuring instruments since 1969
Swiss manufacturer of precision measuring instruments since 1969 µ_prices Validity 01.01.14-31.12.14 Summary S_Cal PRO & S_Cal PRO µm p.2 S_Cal UL III p.3 S_Mike PRO p.4 S_Depth PRO p.5 X_TREME p.6 S_Dial
Calipers. B-1
alipers -1 L I P E R S THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation, they are a favourite
Metrology CONTENTS BRANDS. Page. Digital Calipers. Depth Gauges Digital depth gauges Micrometers
800 SECTION H Metrology Cutwel s metrology range from Mahr, Insize and JBO provides high quality measuring, from basic hand tools to advanced digital measuring tools. All tools are available with UKAS
STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
mm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
Calipers Height Gauges Depth Gauges
Calipers Height Gauges epth Gauges Calipers Height Gauges epth Gauges CONTENTS Calipers IP67 Solar SuperCaliper -3 IP67 Caliper -5 Caliper -7 Long Beam Caliper -9 Solar Caliper -10 Vernier Caliper -11
NEW. Premium Micro Vickers Hardness Tester NOVA 240. See page 7 for details. NEW
Special SPRING / SUMMER 2016 Valid until 30th September 2016 (subject to availability) www.bowersgroup.co.uk Offers Sylvac S_Cal EVO Bluetooth Caliper See page 5 for details. See Bowers Group at MACH 2016,
Electronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers
CONTENT Calipers Electronic calipers Dial calipers Vernier calipers Depth calipers Special purpose calipers Calipers accessories A Micrometers External micrometers Internal micrometers Depth micrometers
No Gimmicks No Hurdles
LIFETIME WARRANTY No Gimmicks No Hurdles e s n e s n o N o N We are proud to announce another industry first for Fowler. In our 67th year as a familyowned, independent USA metrology company, Fowler continues
CALIPERS. Workshop Vernier Caliper 100 Series. Workshop Vernier Caliper 105 Series. Features. Features
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with locking screw Made of hardened alloyed stainless steel Chromed scale with engraved graduations Packed in plastic box WORKSHOP
Sliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.
Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until
Micrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
No Gimmicks No Hurdles No Nonsense
No Gimmicks No Hurdles No Nonsense We are proud to announce another industry first for Fowler. In our 67th year as a familyowned, independent USA metrology company, Fowler continues to lead the way. NEW!
Micromar. a new generation with the reference-system
- 2 Micromar. micrometers Micromar. a new generation with the reference-system WATERPROOF MICROMETERS with this new generation of reference micrometers, mahr once again sets a new standard in the micrometer
PRECISION MEASURING INSTRUMENTS
PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query
Depth Gage A standard measuring tool of industry
epth Gage standard measuring tool of industry epth Micrometer SERIES 329, 129 Interchangeable Rod Type This type uses interchangeable rods to enable wide-range measurement. Order Nos. 329-250-30, 329-251-30,
Measuring instruments
Vernier calipers 26804 Stainless steel - DIN 862 Range Jaw Nonius /inch 135 40 1/20-1/128 160 40 1/20-1/128 180 40 1/20-1/128 Until end of stock 26808 Stainless steel, chrome satin finish - DIN 862 Range
Multi-functional Length Calibrator
Multi-functional Length Calibrator Invented Design Manufacture Taiwan invention patent German innovation patent United States invention patent Multi-functional Length Calibrator Multi-functional Length
Bore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
Digimatic. Height Gages. Linear Height. Depth Gages. SuperCaliper ABSOLUTE. Coolant Proof Caliper. ABSOLUTE Digimatic Caliper ABSOLUTE
D Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper ABSOLUTE Digimatic
Depth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type
epth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type ø4mm interchangeable rods, with lapped measuring end, provide a wide measuring range in mm increments. Ratchet stop provides constant force.
DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.
- s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,
U. pr. E Calibration group
of measuring and testing equipment easily ordered Primarily according to VDI/VDE/DGQ 2618 For many measuring and test devices a calibration logo with indication of a calibration group is stated. From the
NEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers
Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002
SPECIAL OFFERS 16,995 METROLOGY DIRECT 4,000. Micro-Vu Vertex 110 Vision Measuring System 2008 AUTUMN / WINTER PROMOTION
Micro-Vu Vertex 110 Vision Measuring System Comprises: Vertex 110 with 200x150x150mm measuring range Dell PC and 17 TFT monitor Windows XP Inspec automated vision software High resolution video system
ABSOLUTE AOS DIGIMATIC CALIPER
ABSOLUTE AOS DIGIMATIC CALIPER Equipped with AOS (Advanced Onsite Sensor) induction type encoder SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT The NEW Generation ABSOLUTE AOS Digimatic Caliper A new series
Digimatic Caliper. Digimatic Height Gages. Linear Height. Depth Gages. New Products. SuperCaliper ABSOLUTE. Coolant Proof Caliper ABSOLUTE
Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages New Products SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper INDEX Caliper
CALIBRATION. Sylvac Dial Gauge Calibrator
Sylvac Dial Gauge Calibrator The Sylvac stand is custom designed for calibrating all types of dial gauges, lever indicators and transducers. It utilises a 25mm / 1" travel Sylvac probe linked to a digital
TABLE OF CONTENTS WARRANTY
WARRANTY ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original purchaser that this product is of merchantable quality and confirms in kind and quality with the descriptions and specifications
Thickness Gages SERIES 547, 7
Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide
Explanations. 6 Protection (IP-Code) acc. to DIN / IEC etc. Several Icons. Manufacturing process
info@vogel-germany.de - ww.vogel-germany.de Explanations 1 2 8 9 10 In our catalogue you will find several pictograms beside the text description. They should be helpful for a quick and easier explanation
DIAL GAUGES. K-1
DIAL GAUGES K-1 IP65 Digital Indicator IP65 Protection Level, against liquids. With large digital display. Preset function. ABS/INC. Tolerance setting and indication. Metric/inch conversion. Data output
Surface Roughness Testing
Surface Roughness Testing J-1 Summary of Roughness Parameters Commonly Used Arithmetical mean deviation of the profile R a (ISO 4287, DIN 4768) The arithmetical mean deviation of the profile Ra is the
Data Sheet: LDS 1367 Date:
Product: Electronic Digital Measuring Set Page 1 of 5 Digital Caliper and Electronic Micrometer Set Set contains: 1 x Electronic Caliper: 150mm/6 1 x Electronic Micrometer: 0-25/0-1 mm Housed in a fitted
ELECTRONIC CALIPER. Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Code
ELECTRONIC CALIPER Code 1114-150 1114-200 1114-300 Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Zinc alloy case Resolution: 0.01mm/0.0005" Buttons: zero, power on/off, inch/mm Battery SR44, with one spare
VECTRA-TOUCH
179 introduction The «Vectra-Touch» height measuring instruments are of universal use in any production field. They are the result of 30 years of experience in development and manufacturing. This experience
HEIGHT GAGES YES. Frontal Squareness Deviation "/0.005mm "/.008mm "/0.011mm Air Cushion
Over 80 NEW items! HEIGHT GAGES Fowler-Trimos V3, V4 & V5 Electronic Height Gages The Fowler-Trimos V3, V4 and V5 vertical measuring instruments have been developed for the most difficult workshop environments.
Precision Measuring Equipment and Industrial Supplies since 1924.
J.W. DONHIN O. www.jwdonchin.com Precision Measuring Equipment and Industrial Supplies since 1924. 4841 W. hicago ve. - hicago, IL 60651 Phone: 773-261-2182 Fax: 773-261-2867 sales@jwdonchin.com J.W. Donchin
Precision Bench Centres Page 338. Universal Bevel Protractors Pages 339 to 341, 357. Steel Squares and Rules Pages 342 to 346
Stands and Bench Tools Stands Pages 325 to 331 Magnetic Stands Pages 332 to 337 Precision Bench Centres Page 338 Universal Bevel Protractors Pages 339 to 341, 357 Steel Squares and Rules Pages 342 to 346
MarCator. Dial and Digital Indicators
MarCator. Digital and Dial Indicators MarCator. Dial and Digital Indicators Digital Indicators Overview 5-2 MarCator 175 R Standard versions with digital display 5-4 MarCator 186 R / 186 WR With tolerance
MAHRLIGHTS. From j 215,-- SPRING PROMOTION. MarCator. Digital indicators with System PROMOTION PRICES VALID UNTIL 31 MAY 2012
+ MAHRLIGHTS MarCator. Digital indicators with System From j 215,-- SPRING PROMOTION PROMOTION PRICES VALID UNTIL 31 MAY 2012 2 Mahrlights. Spring Promotion MarCal. Digital Caliper 16 EWR with Reference
Does everything rotate around precision? no problem with Micromar.
Does everything rotate around precision? no problem with Micromar. The latest information on MICROMAR products can be found on our website: www.mahr.com, WebCode 2 Micrometers belong alongside calipers
Height Gauges. Height Gauges K-1
Height Gauges K-1 Made To Measure in the Course of the Manufacturing Process Height gauges perform one-dimensional measurements on a surface plate, preferably in granite. TESA-µHITE we offer to you in
Head office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax:
C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243 Fax: 972-9-835-3307 nogatools@nogatools.co.il
7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges
CATALOG NO. AS7 I N D E X 7 Micrometers 7 Calipers 77 Depth & Height Gauges 89 Indicator & Dial Gauges Bore Gauges 7 Other Gauges Gauges 8 Testers & Optical Instrument A S I M E T O C A T A L O G 7 Precision
LSM-500H/501H/503H/506H/512H Laser Scan Micrometer SERIES 544 Non-contact Measuring Units
LSM-0H/1H/3H/6H/512H Laser Scan Micrometer SERIES 544 Non-contact Measuring Units LSM-0H LSM-6H LSM-1H LSM-3H LSM-512H Using a high speed scanning laser beam, the Laser Scan Micrometer can accurately measure
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Versatile ID measuring gages for hole diameters, groove thickness, tube diameter, and hard-to-reach dimensions. The Digimatic
U.S. Promo PRECISION HAND TOOL PROMOTION
U.S. Promo 2017.3 PRECISION HAND TOOL PROMOTION Precision Tools 3600 ELECTRONIC INDICATORS Long battery life Plastic storage case with clear cover Large, easy-to-read LCD Zero setting in any position Reverse
Kvalitet skydelære inklusiv DKD certifikat! 700,00 kr
- + M A H R L I G H T S Tilbud gældende indtil 31. december 2009 Kvalitet skydelære inklusiv DKD certifikat! 700,00 kr MarCal 16 EX med rund eller rektangulær dybdemål til vores tilbudspris 565,00 kr,
Holtest ABSOLUTE. Borematic. Inside Micrometers. Bore Gages. Digimatic. Holtest. Absolute Borematic. Digimatic Inside Micrometer. Digimatic Bore Gage
C Small Tool Instruments and Data Management Holtest ABSOLUTE Borematic Inside Micrometers Bore Gages Digimatic Holtest INDEX Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C-6, 7 Borematic
HOLTEST / BOREMATIC. Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy. Catalog No.
Small Tool Instruments and Data Management HOLTEST / BOREMATIC Catalog No. E12006 Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy World Class, High Performance,
Vernier Caliper VERNIER CALIPERS. Basic Model. 4 Way measurement. Under 125mm without step measurement. Upper 300mm/12 without depth measurement.
Vernier Caliper VERNIER CALIPERS Basic Model 4 Way measurement. Under 25mm without step measurement. Upper 300mm/2 without depth measurement. Made of Carbon or Stainless. Metric & Inch 0-/6.02mm/.00 0-200mm/8.02mm/.00
V-Anvil Micrometers SERIES 314, Flutes and 5 Flutes
V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant
نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr MARSHAFT I MANUAL SHAFT MEASURING UNITS V02-May 2009 MarShaft MAN Data Sheets 1 MarShaft MAN Shaft Measuring Unit Advantages at first sight A measuring instrument for multiple measuring
BEST DEALS. TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! HexagonMI.com TESAtechnology.
BEST DEALS TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! Valid until 04.30.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com
Inside Micrometers. Bore Gages
Holtest ABSOLUTE Borematic Holtest ABSOLUTE Borematic Inside Micrometers Inside Micrometers Small Tool Instruments Inside Measurement INDEX Holtest Digimatic Holtest -3 Holtest -7 Holtest (Type II) -11
Mitutoyo General Catalog
Mitutoyo General Catalog Laser scan micrometer List of products Move to other products LSM-500H/501H/503H/506H/512H LSM-902/6900 1 SPC 2 Caliper 3 Depth gage 4 Height gage 5 Micrometer 6 Inside micrometer
Electronic indicators, Dial Gauges, Precision Indicators
Electronic indicators, Dial Gauges, Precision Indicators F-1 E LECTRONIC I NDICATORS AND D IAL G AUGES EASY-TO-USE AND VERSATILE As manufacturer of a full range of precision dial gauges for more than 50
For Sales, Service & Spares contact:
For Sales, Service & Spares contact: Michael Francis House 3 Trimbush Way Market Harborough Leicestershire LE16 7XY Registered in England No. 5562754 VAT No. 780 4974 94 Precision, Quality, Innovation
Every tool comes with Certificate of Inspection (see back for details)
Every tool comes with Certificate of Inspection (see back for details) Promotion Ends 8/31/2010 11 Standard Gage Electronic Calipers with Thumbwheel Stainless steel frame Thumbwheel for rapid setting Direct
Heightmatic SERIES 574 High Precision Height Gage
Height Gages Heightmatic 159 Digimatic Height Gage 160 ABSOLUTE Digimatic Height Gage 162 Dial Height Gage 164 Vernier Height Gage 166 CERA Caliper Checker 168 Carbide-tipped Scriber 169 Optional Accessories
Metrology. Jubilee campaign first half of Anniversary Gift. Vernier Caliper 100 mm. Exclusively available from specialized dealers
Metrology Anniversary Gift Vernier Caliper 100 Join the celebration and make sure to receive a caliper with our compliments Exclusively available from specialized dealers Jubilee campaign first half of
MW-2012E PRODUCT CATALOGUE 12/13. Partners in Precision INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE
MW-2012E PRODUCT CATALOGUE 12/13 INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE MOORE & WRIGHT A Brief History... Founded in 1906 by innovative young engineer, Frank
Micrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Heads fine spindle feed INDEX Micrometers
Dial gauges Electronic and Analogue
Dial gauges Electronic and Analogue 1F-1 Dial gauges Electronic and Analogue EASY-TO-USE AND VERSATILE For more than 50 years we have been producing and distributing a wide range of easy-to-use and versatile
Dial Gauge KM 4/5 T. of our Precision Dial Gauge series offer reliability, The well thought-out design, accurate components and robust construction
Dial Gauge M 2 T Dial Gauge M 2/30 T Range 30 mm Accuracy according to Käfer works standard Dial Gauge KM 4/5 T Range 5 mm Bezel-Ø 40 mm Precision Dial Gauges The well thought-out design, accurate components
INSTRUCTIONS FOR USE UNIVERSEL DIAL GAUGE. Fabrique d'instruments de mesure de précision. Chemin du Closalet 16 Case Postale 1023 Crissier/Suisse
INSTRUCTIONS FOR USE DIAL GAUGE UNIVERSEL Fabrique d'instruments de mesure de précision Chemin du Closalet 16 Case Postale 1023 Crissier/Suisse Tél. (021) 635 11 74 Fax (021) 634 54 71 Contents INSTRUCTION
Micrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
Dial gauge testing stand M3
Dial gauge testing stand M3 DESCRIPTION probes (like P10 and P50) (P10 calibrated on channel 1 and P50 calibrated on channel 2) Fast fixing by knob-pulley Delivered with inspection software SYCOPRO II
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320 319 Gauge Stand with Hardened Steel Anvil Series 7 Standard
i-checker SERIES 170 Inspection Instrument for Dial Indicator
i-checker SERIES 170 Inspection Instrument for Dial Indicator The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke
AUGUST - OCTOBER 2017
AUGUST - OCTOBER 07 DIGITAL INDICATOR Digital indicator with ABS, Max./Min., TOLERANCE functions and more. With flat back + lug back. Measuring range: 0-,7 mm : Ø diameter: 56 mm Shank Ø: 8 mm 540 0000
Digital Indicators 1075 / 1080 / Features. Technical Data IP MarCator. Digital Indicators
- 5-38 Digital Indicators 175 / 18 / 181 IP51 Features Functions: ON/OFF (Set display to zero) mm/inch Reversal of counting direction PRESET (for entering a numerical value) DATA (data transmission with
Rotary Measuring Technology
Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life
Best Deals of. Expiration Date:12/19/ $ $ $ C/ON ABS/
C/ON ABS/ Best Deals of 00590303 $159.00 2014 Expiration Date:12/19/14 00590093 $119.00 00599090 $89.00 2.0 www.tesagroup.com Brown & Sharpe TLC-TWIN Wireless Solution Bi-directional counication between
DO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS.
DO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS. Regardless of whether gears, s, cones or grooves are to be measured; the versatility of Multimar Universal Measuring Instruments
50 NEW. Over. items! Valid January 1 st - April 30 th
Over 50 NEW items! Valid January 1 st - April 30 th Fowler - Trimos V3, V4 & V5 Electronic Height Gages The Fowler-Trimos V3, V4 and V5 vertical measuring instruments have been developed for the most difficult
Horizon Premium. Length Measuring and Setting Instrument. The new Trimos Horizon Premium
410 Horizon Premium Length Measuring & Setting Instrument The new Trimos Horizon Premium Length Measuring and Setting Instrument fulfills todays requirements of high accuracy quality control equipment.
TEMPERATURE RATINGS: Terminal Housing: 290 C (554 F) UL94VO Housing: 115 C (239 F) UL94VO
The KO4300 Series Enclosures feature high density double level terminals making them ideal for many electronic applications. They are small to medium in size ranging from 6 to 64 terminals. There are 4
INNOVATIONS AT A SPECIAL PRICE
MAHRLIGHTS WINTER EDITION 1 2019 * FREE Download MICROMAR 40 EWRi MARSURF M 400 MARCOM PROFESSIONAL NEW DIGIMAR 817 CLM Sign up to receive Tips from Mahr s Gaging Guru www.mahr.com/gagingtips MICROMAR